| /* HPPA cores and system support chips. */ |
| |
| #define FIRMWARE_START 0xf0000000 |
| #define FIRMWARE_END 0xf0800000 |
| |
| #define DEVICE_HPA_LEN 0x00100000 |
| |
| /* ftp://parisc.parisc-linux.org/docs/chips/pcxl2_ers.pdf */ |
| #define IO_BROADCAST 0xfffc0000 |
| #define FLEXID 0x0020 |
| #define IO_COMMAND 0x0030 |
| #define MIOC_CONTROL 0xf080 |
| #define GSC_TIMEOUT 0xf0f0 |
| #define GSC15X_CONFIG 0xf7a0 |
| |
| #define LOCAL_COMMAND 0xFFFC0030 |
| #define GLOBAL_COMMAND 0xFFFE0030 |
| #define HPPA_CMD_RESET 5 |
| |
| #define GSC_HPA 0xffc00000 |
| #define DINO_HPA 0xfff80000 |
| #define DINO_UART_HPA 0xfff83000 |
| #define DINO_UART_BASE 0xfff83800 |
| #define DINO_SCSI_HPA 0xfff8c000 |
| #define LASI_HPA 0xffd00000 |
| #define LASI_UART_HPA 0xffd05000 |
| #define LASI_SCSI_HPA 0xffd06000 |
| #define LASI_LAN_HPA 0xffd07000 |
| #define LASI_RTC_HPA 0xffd09000 |
| #define LASI_LPT_HPA 0xffd02000 |
| #define LASI_AUDIO_HPA 0xffd04000 |
| #define LASI_PS2KBD_HPA 0xffd08000 |
| #define LASI_PS2MOU_HPA 0xffd08100 |
| #define LASI_GFX_HPA 0xf8000000 |
| #define CPU_HPA 0xfffb0000 |
| #define MEMORY_HPA 0xfffbf000 |
| |
| #define PCI_HPA DINO_HPA /* PCI bus */ |
| #define IDE_HPA 0xf9000000 /* Boot disc controller */ |
| |
| /* offsets to DINO HPA: */ |
| #define DINO_PCI_ADDR 0x064 |
| #define DINO_CONFIG_DATA 0x068 |
| #define DINO_IO_DATA 0x06c |
| |
| #define PORT_PCI_CMD (PCI_HPA + DINO_PCI_ADDR) |
| #define PORT_PCI_DATA (PCI_HPA + DINO_CONFIG_DATA) |
| |
| #define PORT_SERIAL1 (DINO_UART_HPA + 0x800) |
| #define PORT_SERIAL2 (LASI_UART_HPA + 0x800) |
| |
| #define HPPA_MAX_CPUS 8 /* max. number of SMP CPUs */ |
| #define CPU_CLOCK_MHZ 250 /* emulate a 250 MHz CPU */ |
| #define CPU_HPA_CR_REG 7 /* store CPU HPA in cr7 (SeaBIOS only) */ |
| |
| |
| #if 0 |
| [ 2.160168] 1. Phantom PseudoBC GSC+ Port at 0xffc00000 [8] { 7, 0x0, 0x504, 0x00000 } |
| [ 2.260162] 2. Dino PCI Bridge at 0xfff80000 [8/0] { 13, 0x3, 0x680, 0x0000a } |
| [ 2.350158] 3. Merlin+ 132 Dino RS-232 at 0xfff83000 [8/0/63] { 10, 0x0, 0x022, 0x0008c } |
| [ 2.450160] 4. Merlin 160 Core FW-SCSI at 0xfff8c000 [8/12] { 4, 0x0, 0x03d, 0x00089 } |
| [ 2.550161] 5. Merlin 160 Core BA at 0xffd00000 [8/16] { 11, 0x0, 0x03d, 0x00081 }, additional addresses: 0xffd0c000 0xffc00000 |
| [ 2.700165] 6. Merlin 160 Core RS-232 at 0xffd05000 [8/16/4] { 10, 0x0, 0x03d, 0x0008c } |
| [ 2.800160] 7. Merlin 160 Core SCSI at 0xffd06000 [8/16/5] { 10, 0x0, 0x03d, 0x00082 } |
| [ 2.900162] 8. Merlin 160 Core LAN (802.3) at 0xffd07000 [8/16/6] { 10, 0x0, 0x03d, 0x0008a } |
| [ 3.010187] 9. Merlin 160 Core Centronics at 0xffd02000 [8/16/0] { 10, 0x0, 0x03d, 0x00074 }, additional addresses: 0xffd01000 0xffd03000 |
| [ 3.170204] 10. Merlin 160 Core Audio at 0xffd04000 [8/16/1] { 10, 0x4, 0x03d, 0x0007b } |
| [ 3.270157] 11. Merlin 160 Core PS/2 Port at 0xffd08000 [8/16/7] { 10, 0x0, 0x03d, 0x00084 } |
| [ 3.370151] 12. Merlin 160 Core PS/2 Port at 0xffd08100 [8/16/8] { 10, 0x0, 0x03d, 0x00084 } |
| [ 3.480148] 13. Coral SGC Graphics at 0xfa000000 [8/4] { 10, 0x0, 0x004, 0x00077 } |
| [ 3.570145] 14. Coral SGC Graphics at 0xf4000000 [8/8] { 10, 0x0, 0x004, 0x00077 } |
| [ 3.670146] 15. Gecko GSC Core Graphics at 0xf8000000 [8/24] { 10, 0x0, 0x016, 0x00085 }, additional addresses: 0xf0011000 |
| [ 3.810147] 16. Merlin L2 160 (9000/778/B160L) at 0xfffbe000 [62] { 0, 0x0, 0x502, 0x00004 } |
| [ 3.920139] 17. Memory at 0xfffbf000 [63] { 1, 0x0, 0x067, 0x00009 } |
| [ 4.000142] 18. Merlin+ 132 Dino PS/2 Port at 0xfff81000 [1] { 10, 0x0, 0x022, 0x00096 } |
| [ 4.231309] CPU(s): 1 out of 1 PA7300LC (PCX-L2) at 160.000000 MHz online |
| |
| ./hppa-softmmu/qemu-system-hppa -kernel bios.bin -nographic -serial mon:stdio |
| #endif |
