| // Definitions for X86 IO port access. |
| // |
| // Copyright (C) 2008 Kevin O'Connor <kevin@koconnor.net> |
| // |
| // This file may be distributed under the terms of the GNU LGPLv3 license. |
| // |
| // This file copied (somewhat) intact from SeaBIOS. |
| |
| #ifndef IOPORT_H |
| #define IOPORT_H |
| |
| #include "core-typhoon.h" |
| |
| #define PORT_DMA_ADDR_2 0x0004 |
| #define PORT_DMA_CNT_2 0x0005 |
| #define PORT_DMA1_MASK_REG 0x000a |
| #define PORT_DMA1_MODE_REG 0x000b |
| #define PORT_DMA1_CLEAR_FF_REG 0x000c |
| #define PORT_DMA1_MASTER_CLEAR 0x000d |
| #define PORT_PIC1_CMD 0x0020 |
| #define PORT_PIC1_DATA 0x0021 |
| #define PORT_PIT_COUNTER0 0x0040 |
| #define PORT_PIT_COUNTER1 0x0041 |
| #define PORT_PIT_COUNTER2 0x0042 |
| #define PORT_PIT_MODE 0x0043 |
| #define PORT_PS2_DATA 0x0060 |
| #define PORT_PS2_CTRLB 0x0061 |
| #define PORT_PS2_STATUS 0x0064 |
| #define PORT_CMOS_INDEX 0x0070 |
| #define PORT_CMOS_DATA 0x0071 |
| #define PORT_DIAG 0x0080 |
| #define PORT_DMA_PAGE_2 0x0081 |
| #define PORT_A20 0x0092 |
| #define PORT_PIC2_CMD 0x00a0 |
| #define PORT_PIC2_DATA 0x00a1 |
| #define PORT_SMI_CMD 0x00b2 |
| #define PORT_SMI_STATUS 0x00b3 |
| #define PORT_DMA2_MASK_REG 0x00d4 |
| #define PORT_DMA2_MODE_REG 0x00d6 |
| #define PORT_DMA2_MASTER_CLEAR 0x00da |
| #define PORT_MATH_CLEAR 0x00f0 |
| #define PORT_ATA2_CMD_BASE 0x0170 |
| #define PORT_ATA1_CMD_BASE 0x01f0 |
| #define PORT_LPT2 0x0278 |
| #define PORT_SERIAL4 0x02e8 |
| #define PORT_SERIAL2 0x02f8 |
| #define PORT_ATA2_CTRL_BASE 0x0374 |
| #define PORT_LPT1 0x0378 |
| #define PORT_SERIAL3 0x03e8 |
| #define PORT_ATA1_CTRL_BASE 0x03f4 |
| #define PORT_FD_BASE 0x03f0 |
| #define PORT_FD_DOR 0x03f2 |
| #define PORT_FD_STATUS 0x03f4 |
| #define PORT_FD_DATA 0x03f5 |
| #define PORT_HD_DATA 0x03f6 |
| #define PORT_FD_DIR 0x03f7 |
| #define PORT_SERIAL1 0x03f8 |
| #define PORT_PIC1_ELCR 0x04d0 |
| #define PORT_PIC2_ELCR 0x04d1 |
| #define PORT_PCI_CMD (TYPHOON_PCHIP0_PCI_CONF - TYPHOON_PCHIP0_PCI_IO) |
| #define PORT_PCI_REBOOT (0x0cf9 + 0xfe000000ull) |
| #define PORT_PCI_DATA (PORT_PCI_CMD + 4) |
| #define PORT_BIOS_DEBUG 0x0402 |
| #define PORT_QEMU_CFG_CTL 0x0510 |
| #define PORT_QEMU_CFG_DATA 0x0511 |
| #define PORT_ACPI_PM_BASE 0xb000 |
| #define PORT_SMB_BASE 0xb100 |
| #define PORT_BIOS_APM 0x8900 |
| |
| // Serial port offsets |
| #define SEROFF_DATA 0 |
| #define SEROFF_DLL 0 |
| #define SEROFF_IER 1 |
| #define SEROFF_DLH 1 |
| #define SEROFF_IIR 2 |
| #define SEROFF_LCR 3 |
| #define SEROFF_LSR 5 |
| #define SEROFF_MSR 6 |
| |
| // PORT_A20 bitdefs |
| #define A20_ENABLE_BIT 0x02 |
| |
| // PORT_CMOS_INDEX nmi disable bit |
| #define NMI_DISABLE_BIT 0x80 |
| |
| #endif // ioport.h |
