| // PCI BIOS (int 1a/b1) calls |
| // |
| // Copyright (C) 2008 Kevin O'Connor <kevin@koconnor.net> |
| // Copyright (C) 2002 MandrakeSoft S.A. |
| // |
| // This file may be distributed under the terms of the GNU LGPLv3 license. |
| |
| #include "types.h" // u32 |
| #include "util.h" // handle_1ab1 |
| #include "pci.h" // pci_config_readl |
| #include "bregs.h" // struct bregs |
| #include "biosvar.h" // GET_EBDA |
| #include "pci_regs.h" // PCI_VENDOR_ID |
| |
| #define RET_FUNC_NOT_SUPPORTED 0x81 |
| #define RET_BAD_VENDOR_ID 0x83 |
| #define RET_DEVICE_NOT_FOUND 0x86 |
| #define RET_BUFFER_TOO_SMALL 0x89 |
| |
| // installation check |
| static void |
| handle_1ab101(struct bregs *regs) |
| { |
| // Find max bus. |
| int bdf, max; |
| foreachpci(bdf, max) { |
| } |
| |
| regs->al = 0x01; // Flags - "Config Mechanism #1" supported. |
| regs->bx = 0x0210; // PCI version 2.10 |
| regs->cl = pci_bdf_to_bus(max - 1); |
| regs->edx = 0x20494350; // "PCI " |
| // XXX - bochs bios code sets edi to point to 32bit code - but no |
| // reference to this in spec. |
| set_code_success(regs); |
| } |
| |
| // find pci device |
| static void |
| handle_1ab102(struct bregs *regs) |
| { |
| u32 id = (regs->cx << 16) | regs->dx; |
| int count = regs->si; |
| int bdf, max; |
| foreachpci(bdf, max) { |
| u32 v = pci_config_readl(bdf, PCI_VENDOR_ID); |
| if (v != id) |
| continue; |
| if (count--) |
| continue; |
| regs->bx = bdf; |
| set_code_success(regs); |
| return; |
| } |
| set_code_invalid(regs, RET_DEVICE_NOT_FOUND); |
| } |
| |
| // find class code |
| static void |
| handle_1ab103(struct bregs *regs) |
| { |
| int count = regs->si; |
| u32 classprog = regs->ecx; |
| int bdf, max; |
| foreachpci(bdf, max) { |
| u32 v = pci_config_readl(bdf, PCI_CLASS_REVISION); |
| if ((v>>8) != classprog) |
| continue; |
| if (count--) |
| continue; |
| regs->bx = bdf; |
| set_code_success(regs); |
| return; |
| } |
| set_code_invalid(regs, RET_DEVICE_NOT_FOUND); |
| } |
| |
| // read configuration byte |
| static void |
| handle_1ab108(struct bregs *regs) |
| { |
| regs->cl = pci_config_readb(regs->bx, regs->di); |
| set_code_success(regs); |
| } |
| |
| // read configuration word |
| static void |
| handle_1ab109(struct bregs *regs) |
| { |
| regs->cx = pci_config_readw(regs->bx, regs->di); |
| set_code_success(regs); |
| } |
| |
| // read configuration dword |
| static void |
| handle_1ab10a(struct bregs *regs) |
| { |
| regs->ecx = pci_config_readl(regs->bx, regs->di); |
| set_code_success(regs); |
| } |
| |
| // write configuration byte |
| static void |
| handle_1ab10b(struct bregs *regs) |
| { |
| pci_config_writeb(regs->bx, regs->di, regs->cl); |
| set_code_success(regs); |
| } |
| |
| // write configuration word |
| static void |
| handle_1ab10c(struct bregs *regs) |
| { |
| pci_config_writew(regs->bx, regs->di, regs->cx); |
| set_code_success(regs); |
| } |
| |
| // write configuration dword |
| static void |
| handle_1ab10d(struct bregs *regs) |
| { |
| pci_config_writel(regs->bx, regs->di, regs->ecx); |
| set_code_success(regs); |
| } |
| |
| // get irq routing options |
| static void |
| handle_1ab10e(struct bregs *regs) |
| { |
| struct pir_header *pirtable_g = (void*)(GET_GLOBAL(PirOffset) + 0); |
| if (! pirtable_g) { |
| set_code_invalid(regs, RET_FUNC_NOT_SUPPORTED); |
| return; |
| } |
| |
| struct param_s { |
| u16 size; |
| u16 buf_off; |
| u16 buf_seg; |
| } *param_far = (void*)(regs->di+0); |
| |
| // Validate and update size. |
| u16 bufsize = GET_FARVAR(regs->es, param_far->size); |
| u16 pirsize = GET_GLOBAL(pirtable_g->size) - sizeof(struct pir_header); |
| SET_FARVAR(regs->es, param_far->size, pirsize); |
| if (bufsize < pirsize) { |
| set_code_invalid(regs, RET_BUFFER_TOO_SMALL); |
| return; |
| } |
| |
| // Get dest buffer. |
| void *buf_far = (void*)(GET_FARVAR(regs->es, param_far->buf_off)+0); |
| u16 buf_seg = GET_FARVAR(regs->es, param_far->buf_seg); |
| |
| // Memcpy pir table slots to dest buffer. |
| memcpy_far(buf_seg, buf_far |
| , get_global_seg(), pirtable_g->slots |
| , pirsize); |
| |
| // XXX - bochs bios sets bx to (1 << 9) | (1 << 11) |
| regs->bx = GET_GLOBAL(pirtable_g->exclusive_irqs); |
| set_code_success(regs); |
| } |
| |
| static void |
| handle_1ab1XX(struct bregs *regs) |
| { |
| set_code_unimplemented(regs, RET_FUNC_NOT_SUPPORTED); |
| } |
| |
| void |
| handle_1ab1(struct bregs *regs) |
| { |
| //debug_stub(regs); |
| |
| if (! CONFIG_PCIBIOS) { |
| set_invalid(regs); |
| return; |
| } |
| |
| switch (regs->al) { |
| case 0x01: handle_1ab101(regs); break; |
| case 0x02: handle_1ab102(regs); break; |
| case 0x03: handle_1ab103(regs); break; |
| case 0x08: handle_1ab108(regs); break; |
| case 0x09: handle_1ab109(regs); break; |
| case 0x0a: handle_1ab10a(regs); break; |
| case 0x0b: handle_1ab10b(regs); break; |
| case 0x0c: handle_1ab10c(regs); break; |
| case 0x0d: handle_1ab10d(regs); break; |
| case 0x0e: handle_1ab10e(regs); break; |
| default: handle_1ab1XX(regs); break; |
| } |
| } |