| // System Management Mode support (on emulators) |
| // |
| // Copyright (C) 2008-2014 Kevin O'Connor <kevin@koconnor.net> |
| // Copyright (C) 2006 Fabrice Bellard |
| // |
| // This file may be distributed under the terms of the GNU LGPLv3 license. |
| |
| #include "config.h" // CONFIG_* |
| #include "dev-q35.h" |
| #include "dev-piix.h" |
| #include "hw/pci.h" // pci_config_writel |
| #include "hw/pcidevice.h" // pci_find_device |
| #include "hw/pci_ids.h" // PCI_VENDOR_ID_INTEL |
| #include "hw/pci_regs.h" // PCI_DEVICE_ID |
| #include "output.h" // dprintf |
| #include "paravirt.h" // PORT_SMI_STATUS |
| #include "stacks.h" // HaveSmmCall32 |
| #include "string.h" // memcpy |
| #include "util.h" // smm_setup |
| #include "x86.h" // wbinvd |
| |
| /* |
| * Check SMM state save area format (bits 0-15) and require support |
| * for SMBASE relocation. |
| */ |
| #define SMM_REV_MASK 0x0002ffff |
| |
| #define SMM_REV_I32 0x00020000 |
| #define SMM_REV_I64 0x00020064 |
| |
| struct smm_state { |
| union { |
| struct { |
| u8 pad_000[0xf8]; |
| u32 smm_base; |
| u32 smm_rev; |
| u8 pad_100[0xd0]; |
| u32 eax, ecx, edx, ebx, esp, ebp, esi, edi, eip, eflags; |
| u8 pad_1f8[0x08]; |
| } i32; |
| struct { |
| u8 pad_000[0xfc]; |
| u32 smm_rev; |
| u32 smm_base; |
| u8 pad_104[0x6c]; |
| u64 rflags, rip, r15, r14, r13, r12, r11, r10, r9, r8; |
| u64 rdi, rsi, rbp, rsp, rbx, rdx, rcx, rax; |
| } i64; |
| }; |
| }; |
| |
| struct smm_layout { |
| struct smm_state backup1; |
| struct smm_state backup2; |
| u32 backup_a20; |
| u8 stack[0x8000 - sizeof(struct smm_state)*2 - sizeof(u32)]; |
| u64 codeentry; |
| u8 pad_8008[0x7df8]; |
| struct smm_state cpu; |
| }; |
| |
| void VISIBLE32FLAT |
| handle_smi(u16 cs) |
| { |
| if (!CONFIG_USE_SMM) |
| return; |
| u8 cmd = inb(PORT_SMI_CMD); |
| struct smm_layout *smm = MAKE_FLATPTR(cs, 0); |
| u32 rev = smm->cpu.i32.smm_rev & SMM_REV_MASK; |
| dprintf(DEBUG_HDL_smi, "handle_smi cmd=%x smbase=%p\n", cmd, smm); |
| |
| if (smm == (void*)BUILD_SMM_INIT_ADDR) { |
| // relocate SMBASE to 0xa0000 |
| if (rev == SMM_REV_I32) { |
| smm->cpu.i32.smm_base = BUILD_SMM_ADDR; |
| } else if (rev == SMM_REV_I64) { |
| smm->cpu.i64.smm_base = BUILD_SMM_ADDR; |
| } else { |
| warn_internalerror(); |
| return; |
| } |
| // indicate to smm_relocate_and_restore() that the SMM code was executed |
| outb(0x00, PORT_SMI_STATUS); |
| |
| if (CONFIG_CALL32_SMM) { |
| // Backup current cpu state for SMM trampolining |
| struct smm_layout *newsmm = (void*)BUILD_SMM_ADDR; |
| memcpy(&newsmm->backup1, &smm->cpu, sizeof(newsmm->backup1)); |
| memcpy(&newsmm->backup2, &smm->cpu, sizeof(newsmm->backup2)); |
| HaveSmmCall32 = 1; |
| } |
| |
| return; |
| } |
| |
| if (CONFIG_CALL32_SMM && cmd == CALL32SMM_CMDID) { |
| if (rev == SMM_REV_I32) { |
| u32 regs[8]; |
| memcpy(regs, &smm->cpu.i32.eax, sizeof(regs)); |
| if (smm->cpu.i32.ecx == CALL32SMM_ENTERID) { |
| dprintf(9, "smm cpu call pc=%x esp=%x\n", regs[3], regs[4]); |
| memcpy(&smm->backup2, &smm->cpu, sizeof(smm->backup2)); |
| memcpy(&smm->cpu, &smm->backup1, sizeof(smm->cpu)); |
| memcpy(&smm->cpu.i32.eax, regs, sizeof(regs)); |
| smm->cpu.i32.eip = regs[3]; |
| // Enable a20 and backup its previous state |
| smm->backup_a20 = set_a20(1); |
| } else if (smm->cpu.i32.ecx == CALL32SMM_RETURNID) { |
| dprintf(9, "smm cpu ret %x esp=%x\n", regs[3], regs[4]); |
| memcpy(&smm->cpu, &smm->backup2, sizeof(smm->cpu)); |
| memcpy(&smm->cpu.i32.eax, regs, sizeof(regs)); |
| if (!smm->backup_a20) |
| set_a20(0); |
| smm->cpu.i32.eip = regs[3]; |
| } |
| } else if (rev == SMM_REV_I64) { |
| u64 regs[8]; |
| memcpy(regs, &smm->cpu.i64.rdi, sizeof(regs)); |
| if ((u32)smm->cpu.i64.rcx == CALL32SMM_ENTERID) { |
| memcpy(&smm->backup2, &smm->cpu, sizeof(smm->backup2)); |
| memcpy(&smm->cpu, &smm->backup1, sizeof(smm->cpu)); |
| memcpy(&smm->cpu.i64.rdi, regs, sizeof(regs)); |
| smm->cpu.i64.rip = (u32)regs[4]; |
| // Enable a20 and backup its previous state |
| smm->backup_a20 = set_a20(1); |
| } else if ((u32)smm->cpu.i64.rcx == CALL32SMM_RETURNID) { |
| memcpy(&smm->cpu, &smm->backup2, sizeof(smm->cpu)); |
| memcpy(&smm->cpu.i64.rdi, regs, sizeof(regs)); |
| if (!smm->backup_a20) |
| set_a20(0); |
| smm->cpu.i64.rip = (u32)regs[4]; |
| } |
| } |
| } |
| } |
| |
| extern void entry_smi(void); |
| // movw %cs, %ax; ljmpw $SEG_BIOS, $(entry_smi - BUILD_BIOS_ADDR) |
| #define SMI_INSN (0xeac88c | ((u64)SEG_BIOS<<40) \ |
| | ((u64)((u32)entry_smi - BUILD_BIOS_ADDR) << 24)) |
| |
| static void |
| smm_save_and_copy(void) |
| { |
| // save original memory content |
| struct smm_layout *initsmm = (void*)BUILD_SMM_INIT_ADDR; |
| struct smm_layout *smm = (void*)BUILD_SMM_ADDR; |
| memcpy(&smm->cpu, &initsmm->cpu, sizeof(smm->cpu)); |
| memcpy(&smm->codeentry, &initsmm->codeentry, sizeof(smm->codeentry)); |
| |
| // Setup code entry point. |
| initsmm->codeentry = SMI_INSN; |
| } |
| |
| static void |
| smm_relocate_and_restore(void) |
| { |
| /* init APM status port */ |
| outb(0x01, PORT_SMI_STATUS); |
| |
| /* raise an SMI interrupt */ |
| outb(0x00, PORT_SMI_CMD); |
| |
| /* wait until SMM code executed */ |
| while (inb(PORT_SMI_STATUS) != 0x00) |
| ; |
| |
| /* restore original memory content */ |
| struct smm_layout *initsmm = (void*)BUILD_SMM_INIT_ADDR; |
| struct smm_layout *smm = (void*)BUILD_SMM_ADDR; |
| memcpy(&initsmm->cpu, &smm->cpu, sizeof(initsmm->cpu)); |
| memcpy(&initsmm->codeentry, &smm->codeentry, sizeof(initsmm->codeentry)); |
| |
| // Setup code entry point. |
| smm->codeentry = SMI_INSN; |
| wbinvd(); |
| } |
| |
| // This code is hardcoded for PIIX4 Power Management device. |
| static void piix4_apmc_smm_setup(int isabdf, int i440_bdf) |
| { |
| /* check if SMM init is already done */ |
| u32 value = pci_config_readl(isabdf, PIIX_DEVACTB); |
| if (value & PIIX_DEVACTB_APMC_EN) |
| return; |
| |
| /* enable the SMM memory window */ |
| pci_config_writeb(i440_bdf, I440FX_SMRAM, 0x02 | 0x48); |
| |
| smm_save_and_copy(); |
| |
| /* enable SMI generation when writing to the APMC register */ |
| pci_config_writel(isabdf, PIIX_DEVACTB, value | PIIX_DEVACTB_APMC_EN); |
| |
| /* enable SMI generation */ |
| value = inl(acpi_pm_base + PIIX_PMIO_GLBCTL); |
| outl(value | PIIX_PMIO_GLBCTL_SMI_EN, acpi_pm_base + PIIX_PMIO_GLBCTL); |
| |
| smm_relocate_and_restore(); |
| |
| /* close the SMM memory window and enable normal SMM */ |
| pci_config_writeb(i440_bdf, I440FX_SMRAM, 0x02 | 0x08); |
| } |
| |
| /* PCI_VENDOR_ID_INTEL && PCI_DEVICE_ID_INTEL_ICH9_LPC */ |
| void ich9_lpc_apmc_smm_setup(int isabdf, int mch_bdf) |
| { |
| /* check if SMM init is already done */ |
| u32 value = inl(acpi_pm_base + ICH9_PMIO_SMI_EN); |
| if (value & ICH9_PMIO_SMI_EN_APMC_EN) |
| return; |
| |
| /* enable the SMM memory window */ |
| pci_config_writeb(mch_bdf, Q35_HOST_BRIDGE_SMRAM, 0x02 | 0x48); |
| |
| smm_save_and_copy(); |
| |
| /* enable SMI generation when writing to the APMC register */ |
| outl(value | ICH9_PMIO_SMI_EN_APMC_EN | ICH9_PMIO_SMI_EN_GLB_SMI_EN, |
| acpi_pm_base + ICH9_PMIO_SMI_EN); |
| |
| /* lock SMI generation */ |
| value = pci_config_readw(isabdf, ICH9_LPC_GEN_PMCON_1); |
| pci_config_writel(isabdf, ICH9_LPC_GEN_PMCON_1, |
| value | ICH9_LPC_GEN_PMCON_1_SMI_LOCK); |
| |
| smm_relocate_and_restore(); |
| |
| /* close the SMM memory window and enable normal SMM */ |
| pci_config_writeb(mch_bdf, Q35_HOST_BRIDGE_SMRAM, 0x02 | 0x08); |
| } |
| |
| static int SMMISADeviceBDF = -1, SMMPMDeviceBDF = -1; |
| |
| void |
| smm_device_setup(void) |
| { |
| if (!CONFIG_USE_SMM) |
| return; |
| |
| struct pci_device *isapci, *pmpci; |
| isapci = pci_find_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3); |
| pmpci = pci_find_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441); |
| if (isapci && pmpci) { |
| SMMISADeviceBDF = isapci->bdf; |
| SMMPMDeviceBDF = pmpci->bdf; |
| return; |
| } |
| isapci = pci_find_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_LPC); |
| pmpci = pci_find_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_Q35_MCH); |
| if (isapci && pmpci) { |
| SMMISADeviceBDF = isapci->bdf; |
| SMMPMDeviceBDF = pmpci->bdf; |
| } |
| } |
| |
| void |
| smm_setup(void) |
| { |
| if (!CONFIG_USE_SMM || SMMISADeviceBDF < 0) |
| return; |
| |
| dprintf(3, "init smm\n"); |
| u16 device = pci_config_readw(SMMISADeviceBDF, PCI_DEVICE_ID); |
| if (device == PCI_DEVICE_ID_INTEL_82371AB_3) |
| piix4_apmc_smm_setup(SMMISADeviceBDF, SMMPMDeviceBDF); |
| else |
| ich9_lpc_apmc_smm_setup(SMMISADeviceBDF, SMMPMDeviceBDF); |
| } |