| // MPTable generation (on emulators) |
| // DO NOT ADD NEW FEATURES HERE. (See paravirt.c / biostables.c instead.) |
| // |
| // Copyright (C) 2008-2010 Kevin O'Connor <kevin@koconnor.net> |
| // Copyright (C) 2006 Fabrice Bellard |
| // |
| // This file may be distributed under the terms of the GNU LGPLv3 license. |
| |
| #include "config.h" // CONFIG_* |
| #include "hw/pci.h" |
| #include "hw/pci_regs.h" |
| #include "malloc.h" // free |
| #include "output.h" // dprintf |
| #include "romfile.h" // romfile_loadint |
| #include "std/mptable.h" // MPTABLE_SIGNATURE |
| #include "string.h" // memset |
| #include "util.h" // MaxCountCPUs |
| #include "x86.h" // cpuid |
| |
| void |
| mptable_setup(void) |
| { |
| if (! CONFIG_MPTABLE) |
| return; |
| |
| dprintf(3, "init MPTable\n"); |
| |
| // Config structure in temp area. |
| struct mptable_config_s *config = malloc_tmp(32*1024); |
| if (!config) { |
| warn_noalloc(); |
| return; |
| } |
| memset(config, 0, sizeof(*config)); |
| config->signature = MPCONFIG_SIGNATURE; |
| config->spec = 4; |
| memcpy(config->oemid, BUILD_CPUNAME8, sizeof(config->oemid)); |
| memcpy(config->productid, "0.1 ", sizeof(config->productid)); |
| config->lapic = BUILD_APIC_ADDR; |
| |
| // Detect cpu info |
| u32 cpuid_signature, ebx, ecx, cpuid_features; |
| cpuid(1, &cpuid_signature, &ebx, &ecx, &cpuid_features); |
| if (! cpuid_signature) { |
| // Use default values. |
| cpuid_signature = 0x600; |
| cpuid_features = 0x201; |
| } |
| int pkgcpus = 1; |
| if (cpuid_features & (1 << 28)) { |
| /* Only populate the MPS tables with the first logical CPU in |
| each package */ |
| pkgcpus = (ebx >> 16) & 0xff; |
| pkgcpus = 1 << (__fls(pkgcpus - 1) + 1); /* round up to power of 2 */ |
| } |
| u8 apic_version = readl((u8*)BUILD_APIC_ADDR + 0x30) & 0xff; |
| |
| // CPU definitions. |
| struct mpt_cpu *cpus = (void*)&config[1], *cpu = cpus; |
| int i; |
| for (i = 0; i < MaxCountCPUs; i+=pkgcpus) { |
| memset(cpu, 0, sizeof(*cpu)); |
| cpu->type = MPT_TYPE_CPU; |
| cpu->apicid = i; |
| cpu->apicver = apic_version; |
| /* cpu flags: enabled, bootstrap cpu */ |
| cpu->cpuflag = (apic_id_is_present(i) ? 0x01 : 0x00) | ((i==0) ? 0x02 : 0x00); |
| cpu->cpusignature = cpuid_signature; |
| cpu->featureflag = cpuid_features; |
| cpu++; |
| } |
| int entrycount = cpu - cpus; |
| |
| // PCI bus |
| struct mpt_bus *buses = (void*)cpu, *bus = buses; |
| if (!hlist_empty(&PCIDevices)) { |
| memset(bus, 0, sizeof(*bus)); |
| bus->type = MPT_TYPE_BUS; |
| bus->busid = 0; |
| memcpy(bus->bustype, "PCI ", sizeof(bus->bustype)); |
| bus++; |
| entrycount++; |
| } |
| |
| /* isa bus */ |
| int isabusid = bus - buses; |
| memset(bus, 0, sizeof(*bus)); |
| bus->type = MPT_TYPE_BUS; |
| bus->busid = isabusid; |
| memcpy(bus->bustype, "ISA ", sizeof(bus->bustype)); |
| bus++; |
| entrycount++; |
| |
| /* ioapic */ |
| u8 ioapic_id = BUILD_IOAPIC_ID; |
| struct mpt_ioapic *ioapic = (void*)bus; |
| memset(ioapic, 0, sizeof(*ioapic)); |
| ioapic->type = MPT_TYPE_IOAPIC; |
| ioapic->apicid = ioapic_id; |
| ioapic->apicver = 0x11; |
| ioapic->flags = 1; // enable |
| ioapic->apicaddr = BUILD_IOAPIC_ADDR; |
| entrycount++; |
| |
| /* irqs */ |
| struct mpt_intsrc *intsrcs = (void*)&ioapic[1], *intsrc = intsrcs; |
| int dev = -1; |
| unsigned short pinmask = 0; |
| |
| struct pci_device *pci; |
| foreachpci(pci) { |
| u16 bdf = pci->bdf; |
| if (pci_bdf_to_bus(bdf) != 0) |
| break; |
| int pin = pci_config_readb(bdf, PCI_INTERRUPT_PIN); |
| int irq = pci_config_readb(bdf, PCI_INTERRUPT_LINE); |
| if (pin == 0) |
| continue; |
| if (dev != pci_bdf_to_busdev(bdf)) { |
| dev = pci_bdf_to_busdev(bdf); |
| pinmask = 0; |
| } |
| if (pinmask & (1 << pin)) /* pin was seen already */ |
| continue; |
| pinmask |= (1 << pin); |
| memset(intsrc, 0, sizeof(*intsrc)); |
| intsrc->type = MPT_TYPE_INTSRC; |
| intsrc->irqtype = 0; /* INT */ |
| intsrc->irqflag = 1; /* active high */ |
| intsrc->srcbus = pci_bdf_to_bus(bdf); /* PCI bus */ |
| intsrc->srcbusirq = (pci_bdf_to_dev(bdf) << 2) | (pin - 1); |
| intsrc->dstapic = ioapic_id; |
| intsrc->dstirq = irq; |
| intsrc++; |
| } |
| |
| int irq0_override = romfile_loadint("etc/irq0-override", 0); |
| for (i = 0; i < 16; i++) { |
| memset(intsrc, 0, sizeof(*intsrc)); |
| if (BUILD_PCI_IRQS & (1 << i)) |
| continue; |
| intsrc->type = MPT_TYPE_INTSRC; |
| intsrc->irqtype = 0; /* INT */ |
| intsrc->irqflag = 0; /* conform to bus spec */ |
| intsrc->srcbus = isabusid; /* ISA bus */ |
| intsrc->srcbusirq = i; |
| intsrc->dstapic = ioapic_id; |
| intsrc->dstirq = i; |
| if (irq0_override) { |
| /* Destination 2 is covered by irq0->inti2 override (i == |
| 0). Source IRQ 2 is unused */ |
| if (i == 0) |
| intsrc->dstirq = 2; |
| else if (i == 2) |
| intsrc--; |
| } |
| intsrc++; |
| } |
| |
| /* Local interrupt assignment */ |
| intsrc->type = MPT_TYPE_LOCAL_INT; |
| intsrc->irqtype = 3; /* ExtINT */ |
| intsrc->irqflag = 0; /* PO, EL default */ |
| intsrc->srcbus = isabusid; /* ISA */ |
| intsrc->srcbusirq = 0; |
| intsrc->dstapic = 0; /* BSP == APIC #0 */ |
| intsrc->dstirq = 0; /* LINTIN0 */ |
| intsrc++; |
| |
| intsrc->type = MPT_TYPE_LOCAL_INT; |
| intsrc->irqtype = 1; /* NMI */ |
| intsrc->irqflag = 0; /* PO, EL default */ |
| intsrc->srcbus = isabusid; /* ISA */ |
| intsrc->srcbusirq = 0; |
| intsrc->dstapic = 0xff; /* to all local APICs */ |
| intsrc->dstirq = 1; /* LINTIN1 */ |
| intsrc++; |
| entrycount += intsrc - intsrcs; |
| |
| // Finalize config structure. |
| int length = (void*)intsrc - (void*)config; |
| config->entrycount = entrycount; |
| config->length = length; |
| config->checksum -= checksum(config, length); |
| |
| // floating pointer structure |
| struct mptable_floating_s floating; |
| memset(&floating, 0, sizeof(floating)); |
| floating.signature = MPTABLE_SIGNATURE; |
| floating.physaddr = (u32)config; |
| floating.length = 1; |
| floating.spec_rev = 4; |
| floating.checksum -= checksum(&floating, sizeof(floating)); |
| copy_mptable(&floating); |
| free(config); |
| } |