| // Handler for int 0x15 "system" calls |
| // |
| // Copyright (C) 2008 Kevin O'Connor <kevin@koconnor.net> |
| // Copyright (C) 2002 MandrakeSoft S.A. |
| // |
| // This file may be distributed under the terms of the GNU LGPLv3 license. |
| |
| #include "biosvar.h" // GET_GLOBAL |
| #include "bregs.h" // struct bregs |
| #include "e820map.h" // E820_RAM |
| #include "hw/pic.h" // pic_reset |
| #include "malloc.h" // LegacyRamSize |
| #include "output.h" // debug_enter |
| #include "string.h" // memcpy_far |
| #include "util.h" // handle_1553 |
| #include "x86.h" // set_a20 |
| |
| static void |
| handle_152400(struct bregs *regs) |
| { |
| set_a20(0); |
| set_code_success(regs); |
| } |
| |
| static void |
| handle_152401(struct bregs *regs) |
| { |
| set_a20(1); |
| set_code_success(regs); |
| } |
| |
| static void |
| handle_152402(struct bregs *regs) |
| { |
| regs->al = get_a20(); |
| set_code_success(regs); |
| } |
| |
| static void |
| handle_152403(struct bregs *regs) |
| { |
| regs->bx = 3; |
| set_code_success(regs); |
| } |
| |
| static void |
| handle_1524XX(struct bregs *regs) |
| { |
| set_code_unimplemented(regs, RET_EUNSUPPORTED); |
| } |
| |
| static void |
| handle_1524(struct bregs *regs) |
| { |
| switch (regs->al) { |
| case 0x00: handle_152400(regs); break; |
| case 0x01: handle_152401(regs); break; |
| case 0x02: handle_152402(regs); break; |
| case 0x03: handle_152403(regs); break; |
| default: handle_1524XX(regs); break; |
| } |
| } |
| |
| // removable media eject |
| static void |
| handle_1552(struct bregs *regs) |
| { |
| set_code_success(regs); |
| } |
| |
| static void |
| handle_1587(struct bregs *regs) |
| { |
| // +++ should probably have descriptor checks |
| // +++ should have exception handlers |
| |
| u8 prev_a20_enable = set_a20(1); // enable A20 line |
| |
| // 128K max of transfer on 386+ ??? |
| // source == destination ??? |
| |
| // ES:SI points to descriptor table |
| // offset use initially comments |
| // ============================================== |
| // 00..07 Unused zeros Null descriptor |
| // 08..0f GDT zeros filled in by BIOS |
| // 10..17 source ssssssss source of data |
| // 18..1f dest dddddddd destination of data |
| // 20..27 CS zeros filled in by BIOS |
| // 28..2f SS zeros filled in by BIOS |
| |
| // check for access rights of source & dest here |
| |
| // Initialize GDT descriptor |
| u64 *gdt_far = (void*)(regs->si + 0); |
| u16 gdt_seg = regs->es; |
| u32 loc = (u32)MAKE_FLATPTR(gdt_seg, gdt_far); |
| SET_FARVAR(gdt_seg, gdt_far[1], GDT_DATA | GDT_LIMIT((6*sizeof(u64))-1) |
| | GDT_BASE(loc)); |
| // Initialize CS descriptor |
| u64 lim = GDT_LIMIT(0x0ffff); |
| if (in_post()) |
| lim = GDT_GRANLIMIT(0xffffffff); |
| SET_FARVAR(gdt_seg, gdt_far[4], GDT_CODE | lim | GDT_BASE(BUILD_BIOS_ADDR)); |
| // Initialize SS descriptor |
| loc = (u32)MAKE_FLATPTR(GET_SEG(SS), 0); |
| SET_FARVAR(gdt_seg, gdt_far[5], GDT_DATA | lim | GDT_BASE(loc)); |
| |
| SET_SEG(ES, gdt_seg); |
| u16 count = regs->cx, si = 0, di = 0; |
| asm volatile( |
| // Load new descriptor tables |
| " lgdtw %%es:(1<<3)(%%eax)\n" |
| " lidtw %%cs:pmode_IDT_info\n" |
| |
| // Enable protected mode |
| " movl %%cr0, %%eax\n" |
| " orl $" __stringify(CR0_PE) ", %%eax\n" |
| " movl %%eax, %%cr0\n" |
| |
| // far jump to flush CPU queue after transition to protected mode |
| " ljmpw $(4<<3), $1f\n" |
| |
| // GDT points to valid descriptor table, now load DS, ES |
| "1:movw $(2<<3), %%ax\n" // 2nd descriptor in table, TI=GDT, RPL=00 |
| " movw %%ax, %%ds\n" |
| " movw $(3<<3), %%ax\n" // 3rd descriptor in table, TI=GDT, RPL=00 |
| " movw %%ax, %%es\n" |
| |
| // memcpy CX words using 32bit memcpy if applicable |
| " testw $1, %%cx\n" |
| " jnz 3f\n" |
| " shrw $1, %%cx\n" |
| " rep movsl %%ds:(%%si), %%es:(%%di)\n" |
| |
| // Restore DS and ES segment limits to 0xffff |
| "2:movw $(5<<3), %%ax\n" // 5th descriptor in table (SS) |
| " movw %%ax, %%ds\n" |
| " movw %%ax, %%es\n" |
| |
| // Disable protected mode |
| " movl %%cr0, %%eax\n" |
| " andl $~" __stringify(CR0_PE) ", %%eax\n" |
| " movl %%eax, %%cr0\n" |
| |
| // far jump to flush CPU queue after transition to real mode |
| " ljmpw $" __stringify(SEG_BIOS) ", $4f\n" |
| |
| // Slower 16bit copy method |
| "3:rep movsw %%ds:(%%si), %%es:(%%di)\n" |
| " jmp 2b\n" |
| |
| // restore IDT to normal real-mode defaults |
| "4:lidtw %%cs:rmode_IDT_info\n" |
| |
| // Restore %ds (from %ss) |
| " movw %%ss, %%ax\n" |
| " movw %%ax, %%ds\n" |
| : "+a" (gdt_far), "+c"(count), "+m" (__segment_ES) |
| : "S" (si), "D" (di) |
| : "cc"); |
| |
| set_a20(prev_a20_enable); |
| |
| set_code_success(regs); |
| } |
| |
| // Get the amount of extended memory (above 1M) |
| static void |
| handle_1588(struct bregs *regs) |
| { |
| u32 rs = GET_GLOBAL(LegacyRamSize); |
| |
| // According to Ralf Brown's interrupt the limit should be 15M, |
| // but real machines mostly return max. 63M. |
| if (rs > 64*1024*1024) |
| regs->ax = 63 * 1024; |
| else |
| regs->ax = (rs - 1*1024*1024) / 1024; |
| set_success(regs); |
| } |
| |
| // Switch to protected mode |
| void VISIBLE16 |
| handle_1589(struct bregs *regs) |
| { |
| debug_enter(regs, DEBUG_HDL_15); |
| set_a20(1); |
| |
| pic_reset(regs->bl, regs->bh); |
| |
| u64 *gdt_far = (void*)(regs->si + 0); |
| u16 gdt_seg = regs->es; |
| SET_FARVAR(gdt_seg, gdt_far[7], GDT_CODE | GDT_LIMIT(BUILD_BIOS_SIZE-1) |
| | GDT_BASE(BUILD_BIOS_ADDR)); |
| |
| regs->ds = 3<<3; // 3rd gdt descriptor is %ds |
| regs->es = 4<<3; // 4th gdt descriptor is %es |
| regs->code.seg = 6<<3; // 6th gdt descriptor is %cs |
| |
| set_code_success(regs); |
| |
| asm volatile( |
| // Load new descriptor tables |
| " lgdtw %%es:(1<<3)(%%si)\n" |
| " lidtw %%es:(2<<3)(%%si)\n" |
| |
| // Enable protected mode |
| " movl %%cr0, %%eax\n" |
| " orl $" __stringify(CR0_PE) ", %%eax\n" |
| " movl %%eax, %%cr0\n" |
| |
| // far jump to flush CPU queue after transition to protected mode |
| " ljmpw $(7<<3), $1f\n" |
| |
| // GDT points to valid descriptor table, now load SS |
| "1:movw $(5<<3), %%ax\n" |
| " movw %%ax, %%ds\n" |
| " movw %%ax, %%ss\n" |
| : |
| : "S"(gdt_far), "m" (__segment_ES) |
| : "eax", "cc"); |
| } |
| |
| // Device busy interrupt. Called by Int 16h when no key available |
| static void |
| handle_1590(struct bregs *regs) |
| { |
| } |
| |
| // Interrupt complete. Called by Int 16h when key becomes available |
| static void |
| handle_1591(struct bregs *regs) |
| { |
| } |
| |
| // keyboard intercept |
| static void |
| handle_154f(struct bregs *regs) |
| { |
| set_invalid_silent(regs); |
| } |
| |
| static void |
| handle_15c0(struct bregs *regs) |
| { |
| regs->es = SEG_BIOS; |
| regs->bx = (u32)&BIOS_CONFIG_TABLE; |
| set_code_success(regs); |
| } |
| |
| static void |
| handle_15c1(struct bregs *regs) |
| { |
| regs->es = get_ebda_seg(); |
| set_success(regs); |
| } |
| |
| static void |
| handle_15e801(struct bregs *regs) |
| { |
| // my real system sets ax and bx to 0 |
| // this is confirmed by Ralph Brown list |
| // but syslinux v1.48 is known to behave |
| // strangely if ax is set to 0 |
| // regs.u.r16.ax = 0; |
| // regs.u.r16.bx = 0; |
| |
| u32 rs = GET_GLOBAL(LegacyRamSize); |
| |
| // Get the amount of extended memory (above 1M) |
| if (rs > 16*1024*1024) { |
| // limit to 15M |
| regs->cx = 15*1024; |
| // Get the amount of extended memory above 16M in 64k blocks |
| regs->dx = (rs - 16*1024*1024) / (64*1024); |
| } else { |
| regs->cx = (rs - 1*1024*1024) / 1024; |
| regs->dx = 0; |
| } |
| |
| // Set configured memory equal to extended memory |
| regs->ax = regs->cx; |
| regs->bx = regs->dx; |
| |
| set_success(regs); |
| } |
| |
| static void |
| handle_15e820(struct bregs *regs) |
| { |
| int count = GET_GLOBAL(e820_count); |
| if (regs->edx != 0x534D4150 || regs->bx >= count |
| || regs->ecx < sizeof(e820_list[0])) { |
| set_code_invalid(regs, RET_EUNSUPPORTED); |
| return; |
| } |
| |
| memcpy_far(regs->es, (void*)(regs->di+0) |
| , get_global_seg(), &e820_list[regs->bx] |
| , sizeof(e820_list[0])); |
| if (regs->bx == count-1) |
| regs->ebx = 0; |
| else |
| regs->ebx++; |
| regs->eax = 0x534D4150; |
| regs->ecx = sizeof(e820_list[0]); |
| set_success(regs); |
| } |
| |
| static void |
| handle_15e8XX(struct bregs *regs) |
| { |
| set_code_unimplemented(regs, RET_EUNSUPPORTED); |
| } |
| |
| static void |
| handle_15e8(struct bregs *regs) |
| { |
| switch (regs->al) { |
| case 0x01: handle_15e801(regs); break; |
| case 0x20: handle_15e820(regs); break; |
| default: handle_15e8XX(regs); break; |
| } |
| } |
| |
| static void |
| handle_15XX(struct bregs *regs) |
| { |
| set_code_unimplemented(regs, RET_EUNSUPPORTED); |
| } |
| |
| // INT 15h System Services Entry Point |
| void VISIBLE16 |
| handle_15(struct bregs *regs) |
| { |
| debug_enter(regs, DEBUG_HDL_15); |
| switch (regs->ah) { |
| case 0x24: handle_1524(regs); break; |
| case 0x4f: handle_154f(regs); break; |
| case 0x52: handle_1552(regs); break; |
| case 0x53: handle_1553(regs); break; |
| case 0x5f: handle_155f(regs); break; |
| case 0x7f: handle_157f(regs); break; |
| case 0x83: handle_1583(regs); break; |
| case 0x86: handle_1586(regs); break; |
| case 0x87: handle_1587(regs); break; |
| case 0x88: handle_1588(regs); break; |
| case 0x90: handle_1590(regs); break; |
| case 0x91: handle_1591(regs); break; |
| case 0xc0: handle_15c0(regs); break; |
| case 0xc1: handle_15c1(regs); break; |
| case 0xc2: handle_15c2(regs); break; |
| case 0xe8: handle_15e8(regs); break; |
| default: handle_15XX(regs); break; |
| } |
| } |