hw/char/imx_serial.c - qemu - Git at Google

 /*
  * IMX31 UARTS
  *
  * Copyright (c) 2008 OKL
  * Originally Written by Hans Jiang
  * Copyright (c) 2011 NICTA Pty Ltd.
  * Updated by Jean-Christophe Dubois <jcd@tribudubois.net>
  *
  * This work is licensed under the terms of the GNU GPL, version 2 or later.
  * See the COPYING file in the top-level directory.
  *
  * This is a `bare-bones' implementation of the IMX series serial ports.
  * TODO:
  *  -- implement FIFOs.  The real hardware has 32 word transmit
  *                       and receive FIFOs; we currently use a 1-char buffer
  *  -- implement DMA
  *  -- implement BAUD-rate and modem lines, for when the backend
  *     is a real serial device.
  */

 #include "qemu/osdep.h"
 #include "hw/char/imx_serial.h"
 #include "hw/irq.h"
 #include "hw/qdev-properties.h"
 #include "hw/qdev-properties-system.h"
 #include "migration/vmstate.h"
 #include "qemu/log.h"
 #include "qemu/module.h"

 #ifndef DEBUG_IMX_UART
 #define DEBUG_IMX_UART 0
 #endif

 #define DPRINTF(fmt, args...) \
     do { \
         if (DEBUG_IMX_UART) { \
             fprintf(stderr, "[%s]%s: " fmt , TYPE_IMX_SERIAL, \
                                              __func__, ##args); \
         } \
     } while (0)

 static const VMStateDescription vmstate_imx_serial = {
     .name = TYPE_IMX_SERIAL,
     .version_id = 2,
     .minimum_version_id = 2,
     .fields = (VMStateField[]) {
         VMSTATE_INT32(readbuff, IMXSerialState),
         VMSTATE_UINT32(usr1, IMXSerialState),
         VMSTATE_UINT32(usr2, IMXSerialState),
         VMSTATE_UINT32(ucr1, IMXSerialState),
         VMSTATE_UINT32(uts1, IMXSerialState),
         VMSTATE_UINT32(onems, IMXSerialState),
         VMSTATE_UINT32(ufcr, IMXSerialState),
         VMSTATE_UINT32(ubmr, IMXSerialState),
         VMSTATE_UINT32(ubrc, IMXSerialState),
         VMSTATE_UINT32(ucr3, IMXSerialState),
         VMSTATE_UINT32(ucr4, IMXSerialState),
         VMSTATE_END_OF_LIST()
     },
 };

 static void imx_update(IMXSerialState *s)
 {
     uint32_t usr1;
     uint32_t usr2;
     uint32_t mask;

     /*
      * Lucky for us TRDY and RRDY has the same offset in both USR1 and
      * UCR1, so we can get away with something as simple as the
      * following:
      */
     usr1 = s->usr1 & s->ucr1 & (USR1_TRDY | USR1_RRDY);
     /*
      * Bits that we want in USR2 are not as conveniently laid out,
      * unfortunately.
      */
     mask = (s->ucr1 & UCR1_TXMPTYEN) ? USR2_TXFE : 0;
     /*
      * TCEN and TXDC are both bit 3
      * RDR and DREN are both bit 0
      */
     mask |= s->ucr4 & (UCR4_WKEN | UCR4_TCEN | UCR4_DREN);

     usr2 = s->usr2 & mask;

     qemu_set_irq(s->irq, usr1 || usr2);
 }

 static void imx_serial_reset(IMXSerialState *s)
 {

     s->usr1 = USR1_TRDY | USR1_RXDS;
     /*
      * Fake attachment of a terminal: assert RTS.
      */
     s->usr1 |= USR1_RTSS;
     s->usr2 = USR2_TXFE | USR2_TXDC | USR2_DCDIN;
     s->uts1 = UTS1_RXEMPTY | UTS1_TXEMPTY;
     s->ucr1 = 0;
     s->ucr2 = UCR2_SRST;
     s->ucr3 = 0x700;
     s->ubmr = 0;
     s->ubrc = 4;
     s->readbuff = URXD_ERR;
 }

 static void imx_serial_reset_at_boot(DeviceState *dev)
 {
     IMXSerialState *s = IMX_SERIAL(dev);

     imx_serial_reset(s);

     /*
      * enable the uart on boot, so messages from the linux decompresser
      * are visible.  On real hardware this is done by the boot rom
      * before anything else is loaded.
      */
     s->ucr1 = UCR1_UARTEN;
     s->ucr2 = UCR2_TXEN;

 }

 static uint64_t imx_serial_read(void *opaque, hwaddr offset,
                                 unsigned size)
 {
     IMXSerialState *s = (IMXSerialState *)opaque;
     uint32_t c;

     DPRINTF("read(offset=0x%" HWADDR_PRIx ")\n", offset);

     switch (offset >> 2) {
     case 0x0: /* URXD */
         c = s->readbuff;
         if (!(s->uts1 & UTS1_RXEMPTY)) {
             /* Character is valid */
             c |= URXD_CHARRDY;
             s->usr1 &= ~USR1_RRDY;
             s->usr2 &= ~USR2_RDR;
             s->uts1 |= UTS1_RXEMPTY;
             imx_update(s);
             qemu_chr_fe_accept_input(&s->chr);
         }
         return c;

     case 0x20: /* UCR1 */
         return s->ucr1;

     case 0x21: /* UCR2 */
         return s->ucr2;

     case 0x25: /* USR1 */
         return s->usr1;

     case 0x26: /* USR2 */
         return s->usr2;

     case 0x2A: /* BRM Modulator */
         return s->ubmr;

     case 0x2B: /* Baud Rate Count */
         return s->ubrc;

     case 0x2d: /* Test register */
         return s->uts1;

     case 0x24: /* UFCR */
         return s->ufcr;

     case 0x2c:
         return s->onems;

     case 0x22: /* UCR3 */
         return s->ucr3;

     case 0x23: /* UCR4 */
         return s->ucr4;

     case 0x29: /* BRM Incremental */
         return 0x0; /* TODO */

     default:
         qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%"
                       HWADDR_PRIx "\n", TYPE_IMX_SERIAL, __func__, offset);
         return 0;
     }
 }

 static void imx_serial_write(void *opaque, hwaddr offset,
                              uint64_t value, unsigned size)
 {
     IMXSerialState *s = (IMXSerialState *)opaque;
     Chardev *chr = qemu_chr_fe_get_driver(&s->chr);
     unsigned char ch;

     DPRINTF("write(offset=0x%" HWADDR_PRIx ", value = 0x%x) to %s\n",
             offset, (unsigned int)value, chr ? chr->label : "NODEV");

     switch (offset >> 2) {
     case 0x10: /* UTXD */
         ch = value;
         if (s->ucr2 & UCR2_TXEN) {
             /* XXX this blocks entire thread. Rewrite to use
              * qemu_chr_fe_write and background I/O callbacks */
             qemu_chr_fe_write_all(&s->chr, &ch, 1);
             s->usr1 &= ~USR1_TRDY;
             s->usr2 &= ~USR2_TXDC;
             imx_update(s);
             s->usr1 |= USR1_TRDY;
             s->usr2 |= USR2_TXDC;
             imx_update(s);
         }
         break;

     case 0x20: /* UCR1 */
         s->ucr1 = value & 0xffff;

         DPRINTF("write(ucr1=%x)\n", (unsigned int)value);

         imx_update(s);
         break;

     case 0x21: /* UCR2 */
         /*
          * Only a few bits in control register 2 are implemented as yet.
          * If it's intended to use a real serial device as a back-end, this
          * register will have to be implemented more fully.
          */
         if (!(value & UCR2_SRST)) {
             imx_serial_reset(s);
             imx_update(s);
             value |= UCR2_SRST;
         }
         if (value & UCR2_RXEN) {
             if (!(s->ucr2 & UCR2_RXEN)) {
                 qemu_chr_fe_accept_input(&s->chr);
             }
         }
         s->ucr2 = value & 0xffff;
         break;

     case 0x25: /* USR1 */
         value &= USR1_AWAKE | USR1_AIRINT | USR1_DTRD | USR1_AGTIM |
                  USR1_FRAMERR | USR1_ESCF | USR1_RTSD | USR1_PARTYER;
         s->usr1 &= ~value;
         break;

     case 0x26: /* USR2 */
         /*
          * Writing 1 to some bits clears them; all other
          * values are ignored
          */
         value &= USR2_ADET | USR2_DTRF | USR2_IDLE | USR2_ACST |
                  USR2_RIDELT | USR2_IRINT | USR2_WAKE |
                  USR2_DCDDELT | USR2_RTSF | USR2_BRCD | USR2_ORE;
         s->usr2 &= ~value;
         break;

     /*
      * Linux expects to see what it writes to these registers
      * We don't currently alter the baud rate
      */
     case 0x29: /* UBIR */
         s->ubrc = value & 0xffff;
         break;

     case 0x2a: /* UBMR */
         s->ubmr = value & 0xffff;
         break;

     case 0x2c: /* One ms reg */
         s->onems = value & 0xffff;
         break;

     case 0x24: /* FIFO control register */
         s->ufcr = value & 0xffff;
         break;

     case 0x22: /* UCR3 */
         s->ucr3 = value & 0xffff;
         break;

     case 0x23: /* UCR4 */
         s->ucr4 = value & 0xffff;
         imx_update(s);
         break;

     case 0x2d: /* UTS1 */
         qemu_log_mask(LOG_UNIMP, "[%s]%s: Unimplemented reg 0x%"
                       HWADDR_PRIx "\n", TYPE_IMX_SERIAL, __func__, offset);
         /* TODO */
         break;

     default:
         qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%"
                       HWADDR_PRIx "\n", TYPE_IMX_SERIAL, __func__, offset);
     }
 }

 static int imx_can_receive(void *opaque)
 {
     IMXSerialState *s = (IMXSerialState *)opaque;
     return !(s->usr1 & USR1_RRDY);
 }

 static void imx_put_data(void *opaque, uint32_t value)
 {
     IMXSerialState *s = (IMXSerialState *)opaque;

     DPRINTF("received char\n");

     s->usr1 |= USR1_RRDY;
     s->usr2 |= USR2_RDR;
     s->uts1 &= ~UTS1_RXEMPTY;
     s->readbuff = value;
     if (value & URXD_BRK) {
         s->usr2 |= USR2_BRCD;
     }
     imx_update(s);
 }

 static void imx_receive(void *opaque, const uint8_t *buf, int size)
 {
     IMXSerialState *s = (IMXSerialState *)opaque;

     s->usr2 |= USR2_WAKE;
     imx_put_data(opaque, *buf);
 }

 static void imx_event(void *opaque, QEMUChrEvent event)
 {
     if (event == CHR_EVENT_BREAK) {
         imx_put_data(opaque, URXD_BRK | URXD_FRMERR | URXD_ERR);
     }
 }


 static const struct MemoryRegionOps imx_serial_ops = {
     .read = imx_serial_read,
     .write = imx_serial_write,
     .endianness = DEVICE_NATIVE_ENDIAN,
 };

 static void imx_serial_realize(DeviceState *dev, Error **errp)
 {
     IMXSerialState *s = IMX_SERIAL(dev);

     DPRINTF("char dev for uart: %p\n", qemu_chr_fe_get_driver(&s->chr));

     qemu_chr_fe_set_handlers(&s->chr, imx_can_receive, imx_receive,
                              imx_event, NULL, s, NULL, true);
 }

 static void imx_serial_init(Object *obj)
 {
     SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
     IMXSerialState *s = IMX_SERIAL(obj);

     memory_region_init_io(&s->iomem, obj, &imx_serial_ops, s,
                           TYPE_IMX_SERIAL, 0x1000);
     sysbus_init_mmio(sbd, &s->iomem);
     sysbus_init_irq(sbd, &s->irq);
 }

 static Property imx_serial_properties[] = {
     DEFINE_PROP_CHR("chardev", IMXSerialState, chr),
     DEFINE_PROP_END_OF_LIST(),
 };

 static void imx_serial_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);

     dc->realize = imx_serial_realize;
     dc->vmsd = &vmstate_imx_serial;
     dc->reset = imx_serial_reset_at_boot;
     set_bit(DEVICE_CATEGORY_INPUT, dc->categories);
     dc->desc = "i.MX series UART";
     device_class_set_props(dc, imx_serial_properties);
 }

 static const TypeInfo imx_serial_info = {
     .name           = TYPE_IMX_SERIAL,
     .parent         = TYPE_SYS_BUS_DEVICE,
     .instance_size  = sizeof(IMXSerialState),
     .instance_init  = imx_serial_init,
     .class_init     = imx_serial_class_init,
 };

 static void imx_serial_register_types(void)
 {
     type_register_static(&imx_serial_info);
 }

 type_init(imx_serial_register_types)
	/*
	* IMX31 UARTS
	*
	* Copyright (c) 2008 OKL
	* Originally Written by Hans Jiang
	* Copyright (c) 2011 NICTA Pty Ltd.
	* Updated by Jean-Christophe Dubois <jcd@tribudubois.net>
	*
	* This work is licensed under the terms of the GNU GPL, version 2 or later.
	* See the COPYING file in the top-level directory.
	*
	* This is a `bare-bones' implementation of the IMX series serial ports.
	* TODO:
	* -- implement FIFOs. The real hardware has 32 word transmit
	* and receive FIFOs; we currently use a 1-char buffer
	* -- implement DMA
	* -- implement BAUD-rate and modem lines, for when the backend
	* is a real serial device.
	*/

	#include "qemu/osdep.h"
	#include "hw/char/imx_serial.h"
	#include "hw/irq.h"
	#include "hw/qdev-properties.h"
	#include "hw/qdev-properties-system.h"
	#include "migration/vmstate.h"
	#include "qemu/log.h"
	#include "qemu/module.h"

	#ifndef DEBUG_IMX_UART
	#define DEBUG_IMX_UART 0
	#endif

	#define DPRINTF(fmt, args...) \
	do { \
	if (DEBUG_IMX_UART) { \
	fprintf(stderr, "[%s]%s: " fmt , TYPE_IMX_SERIAL, \
	__func__, ##args); \
	} \
	} while (0)

	static const VMStateDescription vmstate_imx_serial = {
	.name = TYPE_IMX_SERIAL,
	.version_id = 2,
	.minimum_version_id = 2,
	.fields = (VMStateField[]) {
	VMSTATE_INT32(readbuff, IMXSerialState),
	VMSTATE_UINT32(usr1, IMXSerialState),
	VMSTATE_UINT32(usr2, IMXSerialState),
	VMSTATE_UINT32(ucr1, IMXSerialState),
	VMSTATE_UINT32(uts1, IMXSerialState),
	VMSTATE_UINT32(onems, IMXSerialState),
	VMSTATE_UINT32(ufcr, IMXSerialState),
	VMSTATE_UINT32(ubmr, IMXSerialState),
	VMSTATE_UINT32(ubrc, IMXSerialState),
	VMSTATE_UINT32(ucr3, IMXSerialState),
	VMSTATE_UINT32(ucr4, IMXSerialState),
	VMSTATE_END_OF_LIST()
	},
	};

	static void imx_update(IMXSerialState *s)
	{
	uint32_t usr1;
	uint32_t usr2;
	uint32_t mask;

	/*
	* Lucky for us TRDY and RRDY has the same offset in both USR1 and
	* UCR1, so we can get away with something as simple as the
	* following:
	*/
	usr1 = s->usr1 & s->ucr1 & (USR1_TRDY \| USR1_RRDY);
	/*
	* Bits that we want in USR2 are not as conveniently laid out,
	* unfortunately.
	*/
	mask = (s->ucr1 & UCR1_TXMPTYEN) ? USR2_TXFE : 0;
	/*
	* TCEN and TXDC are both bit 3
	* RDR and DREN are both bit 0
	*/
	mask \|= s->ucr4 & (UCR4_WKEN \| UCR4_TCEN \| UCR4_DREN);

	usr2 = s->usr2 & mask;

	qemu_set_irq(s->irq, usr1 \|\| usr2);
	}

	static void imx_serial_reset(IMXSerialState *s)
	{

	s->usr1 = USR1_TRDY \| USR1_RXDS;
	/*
	* Fake attachment of a terminal: assert RTS.
	*/
	s->usr1 \|= USR1_RTSS;
	s->usr2 = USR2_TXFE \| USR2_TXDC \| USR2_DCDIN;
	s->uts1 = UTS1_RXEMPTY \| UTS1_TXEMPTY;
	s->ucr1 = 0;
	s->ucr2 = UCR2_SRST;
	s->ucr3 = 0x700;
	s->ubmr = 0;
	s->ubrc = 4;
	s->readbuff = URXD_ERR;
	}

	static void imx_serial_reset_at_boot(DeviceState *dev)
	{
	IMXSerialState *s = IMX_SERIAL(dev);

	imx_serial_reset(s);

	/*
	* enable the uart on boot, so messages from the linux decompresser
	* are visible. On real hardware this is done by the boot rom
	* before anything else is loaded.
	*/
	s->ucr1 = UCR1_UARTEN;
	s->ucr2 = UCR2_TXEN;

	}

	static uint64_t imx_serial_read(void *opaque, hwaddr offset,
	unsigned size)
	{
	IMXSerialState s = (IMXSerialState )opaque;
	uint32_t c;

	DPRINTF("read(offset=0x%" HWADDR_PRIx ")\n", offset);

	switch (offset >> 2) {
	case 0x0: /* URXD */
	c = s->readbuff;
	if (!(s->uts1 & UTS1_RXEMPTY)) {
	/* Character is valid */
	c \|= URXD_CHARRDY;
	s->usr1 &= ~USR1_RRDY;
	s->usr2 &= ~USR2_RDR;
	s->uts1 \|= UTS1_RXEMPTY;
	imx_update(s);
	qemu_chr_fe_accept_input(&s->chr);
	}
	return c;

	case 0x20: /* UCR1 */
	return s->ucr1;

	case 0x21: /* UCR2 */
	return s->ucr2;

	case 0x25: /* USR1 */
	return s->usr1;

	case 0x26: /* USR2 */
	return s->usr2;

	case 0x2A: /* BRM Modulator */
	return s->ubmr;

	case 0x2B: /* Baud Rate Count */
	return s->ubrc;

	case 0x2d: /* Test register */
	return s->uts1;

	case 0x24: /* UFCR */
	return s->ufcr;

	case 0x2c:
	return s->onems;

	case 0x22: /* UCR3 */
	return s->ucr3;

	case 0x23: /* UCR4 */
	return s->ucr4;

	case 0x29: /* BRM Incremental */
	return 0x0; /* TODO */

	default:
	qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%"
	HWADDR_PRIx "\n", TYPE_IMX_SERIAL, __func__, offset);
	return 0;
	}
	}

	static void imx_serial_write(void *opaque, hwaddr offset,
	uint64_t value, unsigned size)
	{
	IMXSerialState s = (IMXSerialState )opaque;
	Chardev *chr = qemu_chr_fe_get_driver(&s->chr);
	unsigned char ch;

	DPRINTF("write(offset=0x%" HWADDR_PRIx ", value = 0x%x) to %s\n",
	offset, (unsigned int)value, chr ? chr->label : "NODEV");

	switch (offset >> 2) {
	case 0x10: /* UTXD */
	ch = value;
	if (s->ucr2 & UCR2_TXEN) {
	/* XXX this blocks entire thread. Rewrite to use
	* qemu_chr_fe_write and background I/O callbacks */
	qemu_chr_fe_write_all(&s->chr, &ch, 1);
	s->usr1 &= ~USR1_TRDY;
	s->usr2 &= ~USR2_TXDC;
	imx_update(s);
	s->usr1 \|= USR1_TRDY;
	s->usr2 \|= USR2_TXDC;
	imx_update(s);
	}
	break;

	case 0x20: /* UCR1 */
	s->ucr1 = value & 0xffff;

	DPRINTF("write(ucr1=%x)\n", (unsigned int)value);

	imx_update(s);
	break;

	case 0x21: /* UCR2 */
	/*
	* Only a few bits in control register 2 are implemented as yet.
	* If it's intended to use a real serial device as a back-end, this
	* register will have to be implemented more fully.
	*/
	if (!(value & UCR2_SRST)) {
	imx_serial_reset(s);
	imx_update(s);
	value \|= UCR2_SRST;
	}
	if (value & UCR2_RXEN) {
	if (!(s->ucr2 & UCR2_RXEN)) {
	qemu_chr_fe_accept_input(&s->chr);
	}
	}
	s->ucr2 = value & 0xffff;
	break;

	case 0x25: /* USR1 */
	value &= USR1_AWAKE \| USR1_AIRINT \| USR1_DTRD \| USR1_AGTIM \|
	USR1_FRAMERR \| USR1_ESCF \| USR1_RTSD \| USR1_PARTYER;
	s->usr1 &= ~value;
	break;

	case 0x26: /* USR2 */
	/*
	* Writing 1 to some bits clears them; all other
	* values are ignored
	*/
	value &= USR2_ADET \| USR2_DTRF \| USR2_IDLE \| USR2_ACST \|
	USR2_RIDELT \| USR2_IRINT \| USR2_WAKE \|
	USR2_DCDDELT \| USR2_RTSF \| USR2_BRCD \| USR2_ORE;
	s->usr2 &= ~value;
	break;

	/*
	* Linux expects to see what it writes to these registers
	* We don't currently alter the baud rate
	*/
	case 0x29: /* UBIR */
	s->ubrc = value & 0xffff;
	break;

	case 0x2a: /* UBMR */
	s->ubmr = value & 0xffff;
	break;

	case 0x2c: /* One ms reg */
	s->onems = value & 0xffff;
	break;

	case 0x24: /* FIFO control register */
	s->ufcr = value & 0xffff;
	break;

	case 0x22: /* UCR3 */
	s->ucr3 = value & 0xffff;
	break;

	case 0x23: /* UCR4 */
	s->ucr4 = value & 0xffff;
	imx_update(s);
	break;

	case 0x2d: /* UTS1 */
	qemu_log_mask(LOG_UNIMP, "[%s]%s: Unimplemented reg 0x%"
	HWADDR_PRIx "\n", TYPE_IMX_SERIAL, __func__, offset);
	/* TODO */
	break;

	default:
	qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%"
	HWADDR_PRIx "\n", TYPE_IMX_SERIAL, __func__, offset);
	}
	}

	static int imx_can_receive(void *opaque)
	{
	IMXSerialState s = (IMXSerialState )opaque;
	return !(s->usr1 & USR1_RRDY);
	}

	static void imx_put_data(void *opaque, uint32_t value)
	{
	IMXSerialState s = (IMXSerialState )opaque;

	DPRINTF("received char\n");

	s->usr1 \|= USR1_RRDY;
	s->usr2 \|= USR2_RDR;
	s->uts1 &= ~UTS1_RXEMPTY;
	s->readbuff = value;
	if (value & URXD_BRK) {
	s->usr2 \|= USR2_BRCD;
	}
	imx_update(s);
	}

	static void imx_receive(void opaque, const uint8_t buf, int size)
	{
	IMXSerialState s = (IMXSerialState )opaque;

	s->usr2 \|= USR2_WAKE;
	imx_put_data(opaque, *buf);
	}

	static void imx_event(void *opaque, QEMUChrEvent event)
	{
	if (event == CHR_EVENT_BREAK) {
	imx_put_data(opaque, URXD_BRK \| URXD_FRMERR \| URXD_ERR);
	}
	}


	static const struct MemoryRegionOps imx_serial_ops = {
	.read = imx_serial_read,
	.write = imx_serial_write,
	.endianness = DEVICE_NATIVE_ENDIAN,
	};

	static void imx_serial_realize(DeviceState dev, Error *errp)
	{
	IMXSerialState *s = IMX_SERIAL(dev);

	DPRINTF("char dev for uart: %p\n", qemu_chr_fe_get_driver(&s->chr));

	qemu_chr_fe_set_handlers(&s->chr, imx_can_receive, imx_receive,
	imx_event, NULL, s, NULL, true);
	}

	static void imx_serial_init(Object *obj)
	{
	SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
	IMXSerialState *s = IMX_SERIAL(obj);

	memory_region_init_io(&s->iomem, obj, &imx_serial_ops, s,
	TYPE_IMX_SERIAL, 0x1000);
	sysbus_init_mmio(sbd, &s->iomem);
	sysbus_init_irq(sbd, &s->irq);
	}

	static Property imx_serial_properties[] = {
	DEFINE_PROP_CHR("chardev", IMXSerialState, chr),
	DEFINE_PROP_END_OF_LIST(),
	};

	static void imx_serial_class_init(ObjectClass klass, void data)
	{
	DeviceClass *dc = DEVICE_CLASS(klass);

	dc->realize = imx_serial_realize;
	dc->vmsd = &vmstate_imx_serial;
	dc->reset = imx_serial_reset_at_boot;
	set_bit(DEVICE_CATEGORY_INPUT, dc->categories);
	dc->desc = "i.MX series UART";
	device_class_set_props(dc, imx_serial_properties);
	}

	static const TypeInfo imx_serial_info = {
	.name = TYPE_IMX_SERIAL,
	.parent = TYPE_SYS_BUS_DEVICE,
	.instance_size = sizeof(IMXSerialState),
	.instance_init = imx_serial_init,
	.class_init = imx_serial_class_init,
	};

	static void imx_serial_register_types(void)
	{
	type_register_static(&imx_serial_info);
	}

	type_init(imx_serial_register_types)