blob: 4731cbbd2a8b789021f6f893889fecb24189fdfc [file] [log] [blame]
/*
* CAN device - SJA1000 chip emulation for QEMU
*
* Copyright (c) 2013-2014 Jin Yang
* Copyright (c) 2014-2018 Pavel Pisa
*
* Initial development supported by Google GSoC 2013 from RTEMS project slot
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#ifndef HW_CAN_SJA1000_H
#define HW_CAN_SJA1000_H
#include "net/can_emu.h"
#define CAN_SJA_MEM_SIZE 128
/* The max size for a message buffer, EFF and DLC=8, DS-p39 */
#define SJA_MSG_MAX_LEN 13
/* The receive buffer size. */
#define SJA_RCV_BUF_LEN 64
typedef struct CanSJA1000State {
/* PeliCAN state and registers sorted by address */
uint8_t mode; /* 0 .. Mode register, DS-p26 */
/* 1 .. Command register */
uint8_t status_pel; /* 2 .. Status register, p15 */
uint8_t interrupt_pel; /* 3 .. Interrupt register */
uint8_t interrupt_en; /* 4 .. Interrupt Enable register */
uint8_t rxmsg_cnt; /* 29 .. RX message counter. DS-p49 */
uint8_t rxbuf_start; /* 30 .. RX buffer start address, DS-p49 */
uint8_t clock; /* 31 .. Clock Divider register, DS-p55 */
uint8_t code_mask[8]; /* 16~23 */
uint8_t tx_buff[13]; /* 96~108 .. transmit buffer */
/* 10~19 .. transmit buffer for BasicCAN */
uint8_t rx_buff[SJA_RCV_BUF_LEN]; /* 32~95 .. 64bytes Rx FIFO */
uint32_t rx_ptr; /* Count by bytes. */
uint32_t rx_cnt; /* Count by bytes. */
/* PeliCAN state and registers sorted by address */
uint8_t control; /* 0 .. Control register */
/* 1 .. Command register */
uint8_t status_bas; /* 2 .. Status register */
uint8_t interrupt_bas; /* 3 .. Interrupt register */
uint8_t code; /* 4 .. Acceptance code register */
uint8_t mask; /* 5 .. Acceptance mask register */
qemu_can_filter filter[4];
qemu_irq irq;
CanBusClientState bus_client;
} CanSJA1000State;
/* PeliCAN mode */
enum SJA1000_PeliCAN_regs {
SJA_MOD = 0x00, /* Mode control register */
SJA_CMR = 0x01, /* Command register */
SJA_SR = 0x02, /* Status register */
SJA_IR = 0x03, /* Interrupt register */
SJA_IER = 0x04, /* Interrupt Enable */
SJA_BTR0 = 0x06, /* Bus Timing register 0 */
SJA_BTR1 = 0x07, /* Bus Timing register 1 */
SJA_OCR = 0x08, /* Output Control register */
SJA_ALC = 0x0b, /* Arbitration Lost Capture */
SJA_ECC = 0x0c, /* Error Code Capture */
SJA_EWLR = 0x0d, /* Error Warning Limit */
SJA_RXERR = 0x0e, /* RX Error Counter */
SJA_TXERR0 = 0x0e, /* TX Error Counter */
SJA_TXERR1 = 0x0f,
SJA_RMC = 0x1d, /* Rx Message Counter
* number of messages in RX FIFO
*/
SJA_RBSA = 0x1e, /* Rx Buffer Start Addr
* address of current message
*/
SJA_FRM = 0x10, /* Transmit Buffer
* write: Receive Buffer
* read: Frame Information
*/
/*
* ID bytes (11 bits in 0 and 1 for standard message or
* 16 bits in 0,1 and 13 bits in 2,3 for extended message)
* The most significant bit of ID is placed in MSB
* position of ID0 register.
*/
SJA_ID0 = 0x11, /* ID for standard and extended frames */
SJA_ID1 = 0x12,
SJA_ID2 = 0x13, /* ID cont. for extended frames */
SJA_ID3 = 0x14,
SJA_DATS = 0x13, /* Data start standard frame */
SJA_DATE = 0x15, /* Data start extended frame */
SJA_ACR0 = 0x10, /* Acceptance Code (4 bytes) in RESET mode */
SJA_AMR0 = 0x14, /* Acceptance Mask (4 bytes) in RESET mode */
SJA_PeliCAN_AC_LEN = 4, /* 4 bytes */
SJA_CDR = 0x1f /* Clock Divider */
};
/* BasicCAN mode */
enum SJA1000_BasicCAN_regs {
SJA_BCAN_CTR = 0x00, /* Control register */
SJA_BCAN_CMR = 0x01, /* Command register */
SJA_BCAN_SR = 0x02, /* Status register */
SJA_BCAN_IR = 0x03 /* Interrupt register */
};
void can_sja_hardware_reset(CanSJA1000State *s);
void can_sja_mem_write(CanSJA1000State *s, hwaddr addr, uint64_t val,
unsigned size);
uint64_t can_sja_mem_read(CanSJA1000State *s, hwaddr addr, unsigned size);
int can_sja_connect_to_bus(CanSJA1000State *s, CanBusState *bus);
void can_sja_disconnect(CanSJA1000State *s);
int can_sja_init(CanSJA1000State *s, qemu_irq irq);
int can_sja_can_receive(CanBusClientState *client);
ssize_t can_sja_receive(CanBusClientState *client,
const qemu_can_frame *frames, size_t frames_cnt);
extern const VMStateDescription vmstate_can_sja;
#endif