| #if defined(TARGET_MIPS) | |
| // MIPS special values for constants | |
| /* | |
| * For setsockopt(2) | |
| * | |
| * This defines are ABI conformant as far as Linux supports these ... | |
| */ | |
| #define TARGET_SOL_SOCKET 0xffff | |
| #define TARGET_SO_DEBUG 0x0001 /* Record debugging information. */ | |
| #define TARGET_SO_REUSEADDR 0x0004 /* Allow reuse of local addresses. */ | |
| #define TARGET_SO_KEEPALIVE 0x0008 /* Keep connections alive and send | |
| SIGPIPE when they die. */ | |
| #define TARGET_SO_DONTROUTE 0x0010 /* Don't do local routing. */ | |
| #define TARGET_SO_BROADCAST 0x0020 /* Allow transmission of | |
| broadcast messages. */ | |
| #define TARGET_SO_LINGER 0x0080 /* Block on close of a reliable | |
| socket to transmit pending data. */ | |
| #define TARGET_SO_OOBINLINE 0x0100 /* Receive out-of-band data in-band. */ | |
| #if 0 | |
| To add: #define TARGET_SO_REUSEPORT 0x0200 /* Allow local address and port reuse. */ | |
| #endif | |
| #define TARGET_SO_TYPE 0x1008 /* Compatible name for SO_STYLE. */ | |
| #define TARGET_SO_STYLE SO_TYPE /* Synonym */ | |
| #define TARGET_SO_ERROR 0x1007 /* get error status and clear */ | |
| #define TARGET_SO_SNDBUF 0x1001 /* Send buffer size. */ | |
| #define TARGET_SO_RCVBUF 0x1002 /* Receive buffer. */ | |
| #define TARGET_SO_SNDLOWAT 0x1003 /* send low-water mark */ | |
| #define TARGET_SO_RCVLOWAT 0x1004 /* receive low-water mark */ | |
| #define TARGET_SO_SNDTIMEO 0x1005 /* send timeout */ | |
| #define TARGET_SO_RCVTIMEO 0x1006 /* receive timeout */ | |
| #define TARGET_SO_ACCEPTCONN 0x1009 | |
| /* linux-specific, might as well be the same as on i386 */ | |
| #define TARGET_SO_NO_CHECK 11 | |
| #define TARGET_SO_PRIORITY 12 | |
| #define TARGET_SO_BSDCOMPAT 14 | |
| #define TARGET_SO_PASSCRED 17 | |
| #define TARGET_SO_PEERCRED 18 | |
| /* Security levels - as per NRL IPv6 - don't actually do anything */ | |
| #define TARGET_SO_SECURITY_AUTHENTICATION 22 | |
| #define TARGET_SO_SECURITY_ENCRYPTION_TRANSPORT 23 | |
| #define TARGET_SO_SECURITY_ENCRYPTION_NETWORK 24 | |
| #define TARGET_SO_BINDTODEVICE 25 | |
| /* Socket filtering */ | |
| #define TARGET_SO_ATTACH_FILTER 26 | |
| #define TARGET_SO_DETACH_FILTER 27 | |
| #define TARGET_SO_PEERNAME 28 | |
| #define TARGET_SO_TIMESTAMP 29 | |
| #define SCM_TIMESTAMP SO_TIMESTAMP | |
| #define TARGET_SO_PEERSEC 30 | |
| #define TARGET_SO_SNDBUFFORCE 31 | |
| #define TARGET_SO_RCVBUFFORCE 33 | |
| /** sock_type - Socket types | |
| * | |
| * Please notice that for binary compat reasons MIPS has to | |
| * override the enum sock_type in include/linux/net.h, so | |
| * we define ARCH_HAS_SOCKET_TYPES here. | |
| * | |
| * @SOCK_DGRAM - datagram (conn.less) socket | |
| * @SOCK_STREAM - stream (connection) socket | |
| * @SOCK_RAW - raw socket | |
| * @SOCK_RDM - reliably-delivered message | |
| * @SOCK_SEQPACKET - sequential packet socket | |
| * @SOCK_PACKET - linux specific way of getting packets at the dev level. | |
| * For writing rarp and other similar things on the user level. | |
| */ | |
| enum sock_type { | |
| TARGET_SOCK_DGRAM = 1, | |
| TARGET_SOCK_STREAM = 2, | |
| TARGET_SOCK_RAW = 3, | |
| TARGET_SOCK_RDM = 4, | |
| TARGET_SOCK_SEQPACKET = 5, | |
| TARGET_SOCK_DCCP = 6, | |
| TARGET_SOCK_PACKET = 10, | |
| }; | |
| #define TARGET_SOCK_MAX (SOCK_PACKET + 1) | |
| #else | |
| /* For setsockopt(2) */ | |
| #define TARGET_SOL_SOCKET 1 | |
| #define TARGET_SO_DEBUG 1 | |
| #define TARGET_SO_REUSEADDR 2 | |
| #define TARGET_SO_TYPE 3 | |
| #define TARGET_SO_ERROR 4 | |
| #define TARGET_SO_DONTROUTE 5 | |
| #define TARGET_SO_BROADCAST 6 | |
| #define TARGET_SO_SNDBUF 7 | |
| #define TARGET_SO_RCVBUF 8 | |
| #define TARGET_SO_SNDBUFFORCE 32 | |
| #define TARGET_SO_RCVBUFFORCE 33 | |
| #define TARGET_SO_KEEPALIVE 9 | |
| #define TARGET_SO_OOBINLINE 10 | |
| #define TARGET_SO_NO_CHECK 11 | |
| #define TARGET_SO_PRIORITY 12 | |
| #define TARGET_SO_LINGER 13 | |
| #define TARGET_SO_BSDCOMPAT 14 | |
| /* To add :#define TARGET_SO_REUSEPORT 15 */ | |
| #if defined(TARGET_PPC) | |
| #define TARGET_SO_RCVLOWAT 16 | |
| #define TARGET_SO_SNDLOWAT 17 | |
| #define TARGET_SO_RCVTIMEO 18 | |
| #define TARGET_SO_SNDTIMEO 19 | |
| #define TARGET_SO_PASSCRED 20 | |
| #define TARGET_SO_PEERCRED 21 | |
| #else | |
| #define TARGET_SO_PASSCRED 16 | |
| #define TARGET_SO_PEERCRED 17 | |
| #define TARGET_SO_RCVLOWAT 18 | |
| #define TARGET_SO_SNDLOWAT 19 | |
| #define TARGET_SO_RCVTIMEO 20 | |
| #define TARGET_SO_SNDTIMEO 21 | |
| #endif | |
| /* Security levels - as per NRL IPv6 - don't actually do anything */ | |
| #define TARGET_SO_SECURITY_AUTHENTICATION 22 | |
| #define TARGET_SO_SECURITY_ENCRYPTION_TRANSPORT 23 | |
| #define TARGET_SO_SECURITY_ENCRYPTION_NETWORK 24 | |
| #define TARGET_SO_BINDTODEVICE 25 | |
| /* Socket filtering */ | |
| #define TARGET_SO_ATTACH_FILTER 26 | |
| #define TARGET_SO_DETACH_FILTER 27 | |
| #define TARGET_SO_PEERNAME 28 | |
| #define TARGET_SO_TIMESTAMP 29 | |
| #define TARGET_SCM_TIMESTAMP TARGET_SO_TIMESTAMP | |
| #define TARGET_SO_ACCEPTCONN 30 | |
| #define TARGET_SO_PEERSEC 31 | |
| #endif |