| /* |
| * Nuvoton NPCM7xx OTP (Fuse Array) Interface |
| * |
| * Copyright 2020 Google LLC |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * for more details. |
| */ |
| |
| #include "qemu/osdep.h" |
| |
| #include "hw/nvram/npcm7xx_otp.h" |
| #include "migration/vmstate.h" |
| #include "qapi/error.h" |
| #include "qemu/bitops.h" |
| #include "qemu/log.h" |
| #include "qemu/module.h" |
| #include "qemu/units.h" |
| |
| /* Each module has 4 KiB of register space. Only a fraction of it is used. */ |
| #define NPCM7XX_OTP_REGS_SIZE (4 * KiB) |
| |
| /* 32-bit register indices. */ |
| typedef enum NPCM7xxOTPRegister { |
| NPCM7XX_OTP_FST, |
| NPCM7XX_OTP_FADDR, |
| NPCM7XX_OTP_FDATA, |
| NPCM7XX_OTP_FCFG, |
| /* Offset 0x10 is FKEYIND in OTP1, FUSTRAP in OTP2 */ |
| NPCM7XX_OTP_FKEYIND = 0x0010 / sizeof(uint32_t), |
| NPCM7XX_OTP_FUSTRAP = 0x0010 / sizeof(uint32_t), |
| NPCM7XX_OTP_FCTL, |
| NPCM7XX_OTP_REGS_END, |
| } NPCM7xxOTPRegister; |
| |
| /* Register field definitions. */ |
| #define FST_RIEN BIT(2) |
| #define FST_RDST BIT(1) |
| #define FST_RDY BIT(0) |
| #define FST_RO_MASK (FST_RDST | FST_RDY) |
| |
| #define FADDR_BYTEADDR(rv) extract32((rv), 0, 10) |
| #define FADDR_BITPOS(rv) extract32((rv), 10, 3) |
| |
| #define FDATA_CLEAR 0x00000001 |
| |
| #define FCFG_FDIS BIT(31) |
| #define FCFG_FCFGLK_MASK 0x00ff0000 |
| |
| #define FCTL_PROG_CMD1 0x00000001 |
| #define FCTL_PROG_CMD2 0xbf79e5d0 |
| #define FCTL_READ_CMD 0x00000002 |
| |
| /** |
| * struct NPCM7xxOTPClass - OTP module class. |
| * @parent: System bus device class. |
| * @mmio_ops: MMIO register operations for this type of module. |
| * |
| * The two OTP modules (key-storage and fuse-array) have slightly different |
| * behavior, so we give them different MMIO register operations. |
| */ |
| struct NPCM7xxOTPClass { |
| SysBusDeviceClass parent; |
| |
| const MemoryRegionOps *mmio_ops; |
| }; |
| |
| #define NPCM7XX_OTP_CLASS(klass) \ |
| OBJECT_CLASS_CHECK(NPCM7xxOTPClass, (klass), TYPE_NPCM7XX_OTP) |
| #define NPCM7XX_OTP_GET_CLASS(obj) \ |
| OBJECT_GET_CLASS(NPCM7xxOTPClass, (obj), TYPE_NPCM7XX_OTP) |
| |
| static uint8_t ecc_encode_nibble(uint8_t n) |
| { |
| uint8_t result = n; |
| |
| result |= (((n >> 0) & 1) ^ ((n >> 1) & 1)) << 4; |
| result |= (((n >> 2) & 1) ^ ((n >> 3) & 1)) << 5; |
| result |= (((n >> 0) & 1) ^ ((n >> 2) & 1)) << 6; |
| result |= (((n >> 1) & 1) ^ ((n >> 3) & 1)) << 7; |
| |
| return result; |
| } |
| |
| void npcm7xx_otp_array_write(NPCM7xxOTPState *s, const void *data, |
| unsigned int offset, unsigned int len) |
| { |
| const uint8_t *src = data; |
| uint8_t *dst = &s->array[offset]; |
| |
| while (len-- > 0) { |
| uint8_t c = *src++; |
| |
| *dst++ = ecc_encode_nibble(extract8(c, 0, 4)); |
| *dst++ = ecc_encode_nibble(extract8(c, 4, 4)); |
| } |
| } |
| |
| /* Common register read handler for both OTP classes. */ |
| static uint64_t npcm7xx_otp_read(NPCM7xxOTPState *s, NPCM7xxOTPRegister reg) |
| { |
| uint32_t value = 0; |
| |
| switch (reg) { |
| case NPCM7XX_OTP_FST: |
| case NPCM7XX_OTP_FADDR: |
| case NPCM7XX_OTP_FDATA: |
| case NPCM7XX_OTP_FCFG: |
| value = s->regs[reg]; |
| break; |
| |
| case NPCM7XX_OTP_FCTL: |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "%s: read from write-only FCTL register\n", |
| DEVICE(s)->canonical_path); |
| break; |
| |
| default: |
| qemu_log_mask(LOG_GUEST_ERROR, "%s: read from invalid offset 0x%zx\n", |
| DEVICE(s)->canonical_path, reg * sizeof(uint32_t)); |
| break; |
| } |
| |
| return value; |
| } |
| |
| /* Read a byte from the OTP array into the data register. */ |
| static void npcm7xx_otp_read_array(NPCM7xxOTPState *s) |
| { |
| uint32_t faddr = s->regs[NPCM7XX_OTP_FADDR]; |
| |
| s->regs[NPCM7XX_OTP_FDATA] = s->array[FADDR_BYTEADDR(faddr)]; |
| s->regs[NPCM7XX_OTP_FST] |= FST_RDST | FST_RDY; |
| } |
| |
| /* Program a byte from the data register into the OTP array. */ |
| static void npcm7xx_otp_program_array(NPCM7xxOTPState *s) |
| { |
| uint32_t faddr = s->regs[NPCM7XX_OTP_FADDR]; |
| |
| /* Bits can only go 0->1, never 1->0. */ |
| s->array[FADDR_BYTEADDR(faddr)] |= (1U << FADDR_BITPOS(faddr)); |
| s->regs[NPCM7XX_OTP_FST] |= FST_RDST | FST_RDY; |
| } |
| |
| /* Compute the next value of the FCFG register. */ |
| static uint32_t npcm7xx_otp_compute_fcfg(uint32_t cur_value, uint32_t new_value) |
| { |
| uint32_t lock_mask; |
| uint32_t value; |
| |
| /* |
| * FCFGLK holds sticky bits 16..23, indicating which bits in FPRGLK (8..15) |
| * and FRDLK (0..7) that are read-only. |
| */ |
| lock_mask = (cur_value & FCFG_FCFGLK_MASK) >> 8; |
| lock_mask |= lock_mask >> 8; |
| /* FDIS and FCFGLK bits are sticky (write 1 to set; can't clear). */ |
| value = cur_value & (FCFG_FDIS | FCFG_FCFGLK_MASK); |
| /* Preserve read-only bits in FPRGLK and FRDLK */ |
| value |= cur_value & lock_mask; |
| /* Set all bits that aren't read-only. */ |
| value |= new_value & ~lock_mask; |
| |
| return value; |
| } |
| |
| /* Common register write handler for both OTP classes. */ |
| static void npcm7xx_otp_write(NPCM7xxOTPState *s, NPCM7xxOTPRegister reg, |
| uint32_t value) |
| { |
| switch (reg) { |
| case NPCM7XX_OTP_FST: |
| /* RDST is cleared by writing 1 to it. */ |
| if (value & FST_RDST) { |
| s->regs[NPCM7XX_OTP_FST] &= ~FST_RDST; |
| } |
| /* Preserve read-only and write-one-to-clear bits */ |
| value &= ~FST_RO_MASK; |
| value |= s->regs[NPCM7XX_OTP_FST] & FST_RO_MASK; |
| break; |
| |
| case NPCM7XX_OTP_FADDR: |
| break; |
| |
| case NPCM7XX_OTP_FDATA: |
| /* |
| * This register is cleared by writing a magic value to it; no other |
| * values can be written. |
| */ |
| if (value == FDATA_CLEAR) { |
| value = 0; |
| } else { |
| value = s->regs[NPCM7XX_OTP_FDATA]; |
| } |
| break; |
| |
| case NPCM7XX_OTP_FCFG: |
| value = npcm7xx_otp_compute_fcfg(s->regs[NPCM7XX_OTP_FCFG], value); |
| break; |
| |
| case NPCM7XX_OTP_FCTL: |
| switch (value) { |
| case FCTL_READ_CMD: |
| npcm7xx_otp_read_array(s); |
| break; |
| |
| case FCTL_PROG_CMD1: |
| /* |
| * Programming requires writing two separate magic values to this |
| * register; this is the first one. Just store it so it can be |
| * verified later when the second magic value is received. |
| */ |
| break; |
| |
| case FCTL_PROG_CMD2: |
| /* |
| * Only initiate programming if we received the first half of the |
| * command immediately before this one. |
| */ |
| if (s->regs[NPCM7XX_OTP_FCTL] == FCTL_PROG_CMD1) { |
| npcm7xx_otp_program_array(s); |
| } |
| break; |
| |
| default: |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "%s: unrecognized FCNTL value 0x%" PRIx32 "\n", |
| DEVICE(s)->canonical_path, value); |
| break; |
| } |
| if (value != FCTL_PROG_CMD1) { |
| value = 0; |
| } |
| break; |
| |
| default: |
| qemu_log_mask(LOG_GUEST_ERROR, "%s: write to invalid offset 0x%zx\n", |
| DEVICE(s)->canonical_path, reg * sizeof(uint32_t)); |
| return; |
| } |
| |
| s->regs[reg] = value; |
| } |
| |
| /* Register read handler specific to the fuse array OTP module. */ |
| static uint64_t npcm7xx_fuse_array_read(void *opaque, hwaddr addr, |
| unsigned int size) |
| { |
| NPCM7xxOTPRegister reg = addr / sizeof(uint32_t); |
| NPCM7xxOTPState *s = opaque; |
| uint32_t value; |
| |
| /* |
| * Only the Fuse Strap register needs special handling; all other registers |
| * work the same way for both kinds of OTP modules. |
| */ |
| if (reg != NPCM7XX_OTP_FUSTRAP) { |
| value = npcm7xx_otp_read(s, reg); |
| } else { |
| /* FUSTRAP is stored as three copies in the OTP array. */ |
| uint32_t fustrap[3]; |
| |
| memcpy(fustrap, &s->array[0], sizeof(fustrap)); |
| |
| /* Determine value by a majority vote on each bit. */ |
| value = (fustrap[0] & fustrap[1]) | (fustrap[0] & fustrap[2]) | |
| (fustrap[1] & fustrap[2]); |
| } |
| |
| return value; |
| } |
| |
| /* Register write handler specific to the fuse array OTP module. */ |
| static void npcm7xx_fuse_array_write(void *opaque, hwaddr addr, uint64_t v, |
| unsigned int size) |
| { |
| NPCM7xxOTPRegister reg = addr / sizeof(uint32_t); |
| NPCM7xxOTPState *s = opaque; |
| |
| /* |
| * The Fuse Strap register is read-only. Other registers are handled by |
| * common code. |
| */ |
| if (reg != NPCM7XX_OTP_FUSTRAP) { |
| npcm7xx_otp_write(s, reg, v); |
| } |
| } |
| |
| static const MemoryRegionOps npcm7xx_fuse_array_ops = { |
| .read = npcm7xx_fuse_array_read, |
| .write = npcm7xx_fuse_array_write, |
| .endianness = DEVICE_LITTLE_ENDIAN, |
| .valid = { |
| .min_access_size = 4, |
| .max_access_size = 4, |
| .unaligned = false, |
| }, |
| }; |
| |
| /* Register read handler specific to the key storage OTP module. */ |
| static uint64_t npcm7xx_key_storage_read(void *opaque, hwaddr addr, |
| unsigned int size) |
| { |
| NPCM7xxOTPRegister reg = addr / sizeof(uint32_t); |
| NPCM7xxOTPState *s = opaque; |
| |
| /* |
| * Only the Fuse Key Index register needs special handling; all other |
| * registers work the same way for both kinds of OTP modules. |
| */ |
| if (reg != NPCM7XX_OTP_FKEYIND) { |
| return npcm7xx_otp_read(s, reg); |
| } |
| |
| qemu_log_mask(LOG_UNIMP, "%s: FKEYIND is not implemented\n", __func__); |
| |
| return s->regs[NPCM7XX_OTP_FKEYIND]; |
| } |
| |
| /* Register write handler specific to the key storage OTP module. */ |
| static void npcm7xx_key_storage_write(void *opaque, hwaddr addr, uint64_t v, |
| unsigned int size) |
| { |
| NPCM7xxOTPRegister reg = addr / sizeof(uint32_t); |
| NPCM7xxOTPState *s = opaque; |
| |
| /* |
| * Only the Fuse Key Index register needs special handling; all other |
| * registers work the same way for both kinds of OTP modules. |
| */ |
| if (reg != NPCM7XX_OTP_FKEYIND) { |
| npcm7xx_otp_write(s, reg, v); |
| return; |
| } |
| |
| qemu_log_mask(LOG_UNIMP, "%s: FKEYIND is not implemented\n", __func__); |
| |
| s->regs[NPCM7XX_OTP_FKEYIND] = v; |
| } |
| |
| static const MemoryRegionOps npcm7xx_key_storage_ops = { |
| .read = npcm7xx_key_storage_read, |
| .write = npcm7xx_key_storage_write, |
| .endianness = DEVICE_LITTLE_ENDIAN, |
| .valid = { |
| .min_access_size = 4, |
| .max_access_size = 4, |
| .unaligned = false, |
| }, |
| }; |
| |
| static void npcm7xx_otp_enter_reset(Object *obj, ResetType type) |
| { |
| NPCM7xxOTPState *s = NPCM7XX_OTP(obj); |
| |
| memset(s->regs, 0, sizeof(s->regs)); |
| |
| s->regs[NPCM7XX_OTP_FST] = 0x00000001; |
| s->regs[NPCM7XX_OTP_FCFG] = 0x20000000; |
| } |
| |
| static void npcm7xx_otp_realize(DeviceState *dev, Error **errp) |
| { |
| NPCM7xxOTPClass *oc = NPCM7XX_OTP_GET_CLASS(dev); |
| NPCM7xxOTPState *s = NPCM7XX_OTP(dev); |
| SysBusDevice *sbd = SYS_BUS_DEVICE(dev); |
| |
| memset(s->array, 0, sizeof(s->array)); |
| |
| memory_region_init_io(&s->mmio, OBJECT(s), oc->mmio_ops, s, "regs", |
| NPCM7XX_OTP_REGS_SIZE); |
| sysbus_init_mmio(sbd, &s->mmio); |
| } |
| |
| static const VMStateDescription vmstate_npcm7xx_otp = { |
| .name = "npcm7xx-otp", |
| .version_id = 0, |
| .minimum_version_id = 0, |
| .fields = (VMStateField[]) { |
| VMSTATE_UINT32_ARRAY(regs, NPCM7xxOTPState, NPCM7XX_OTP_NR_REGS), |
| VMSTATE_UINT8_ARRAY(array, NPCM7xxOTPState, NPCM7XX_OTP_ARRAY_BYTES), |
| VMSTATE_END_OF_LIST(), |
| }, |
| }; |
| |
| static void npcm7xx_otp_class_init(ObjectClass *klass, void *data) |
| { |
| ResettableClass *rc = RESETTABLE_CLASS(klass); |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| |
| QEMU_BUILD_BUG_ON(NPCM7XX_OTP_REGS_END > NPCM7XX_OTP_NR_REGS); |
| |
| dc->realize = npcm7xx_otp_realize; |
| dc->vmsd = &vmstate_npcm7xx_otp; |
| rc->phases.enter = npcm7xx_otp_enter_reset; |
| } |
| |
| static void npcm7xx_key_storage_class_init(ObjectClass *klass, void *data) |
| { |
| NPCM7xxOTPClass *oc = NPCM7XX_OTP_CLASS(klass); |
| |
| oc->mmio_ops = &npcm7xx_key_storage_ops; |
| } |
| |
| static void npcm7xx_fuse_array_class_init(ObjectClass *klass, void *data) |
| { |
| NPCM7xxOTPClass *oc = NPCM7XX_OTP_CLASS(klass); |
| |
| oc->mmio_ops = &npcm7xx_fuse_array_ops; |
| } |
| |
| static const TypeInfo npcm7xx_otp_types[] = { |
| { |
| .name = TYPE_NPCM7XX_OTP, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(NPCM7xxOTPState), |
| .class_size = sizeof(NPCM7xxOTPClass), |
| .class_init = npcm7xx_otp_class_init, |
| .abstract = true, |
| }, |
| { |
| .name = TYPE_NPCM7XX_KEY_STORAGE, |
| .parent = TYPE_NPCM7XX_OTP, |
| .class_init = npcm7xx_key_storage_class_init, |
| }, |
| { |
| .name = TYPE_NPCM7XX_FUSE_ARRAY, |
| .parent = TYPE_NPCM7XX_OTP, |
| .class_init = npcm7xx_fuse_array_class_init, |
| }, |
| }; |
| DEFINE_TYPES(npcm7xx_otp_types); |