|  | /* | 
|  | * Postcopy migration for RAM | 
|  | * | 
|  | * Copyright 2013 Red Hat, Inc. and/or its affiliates | 
|  | * | 
|  | * Authors: | 
|  | *  Dave Gilbert  <dgilbert@redhat.com> | 
|  | * | 
|  | * This work is licensed under the terms of the GNU GPL, version 2 or later. | 
|  | * See the COPYING file in the top-level directory. | 
|  | * | 
|  | */ | 
|  | #ifndef QEMU_POSTCOPY_RAM_H | 
|  | #define QEMU_POSTCOPY_RAM_H | 
|  |  | 
|  | #include "qapi/qapi-types-migration.h" | 
|  |  | 
|  | /* Return true if the host supports everything we need to do postcopy-ram */ | 
|  | bool postcopy_ram_supported_by_host(MigrationIncomingState *mis, | 
|  | Error **errp); | 
|  |  | 
|  | /* | 
|  | * Make all of RAM sensitive to accesses to areas that haven't yet been written | 
|  | * and wire up anything necessary to deal with it. | 
|  | */ | 
|  | int postcopy_ram_incoming_setup(MigrationIncomingState *mis); | 
|  |  | 
|  | /* | 
|  | * Initialise postcopy-ram, setting the RAM to a state where we can go into | 
|  | * postcopy later; must be called prior to any precopy. | 
|  | * called from ram.c's similarly named ram_postcopy_incoming_init | 
|  | */ | 
|  | int postcopy_ram_incoming_init(MigrationIncomingState *mis); | 
|  |  | 
|  | /* | 
|  | * At the end of a migration where postcopy_ram_incoming_init was called. | 
|  | */ | 
|  | int postcopy_ram_incoming_cleanup(MigrationIncomingState *mis); | 
|  |  | 
|  | /* | 
|  | * Userfault requires us to mark RAM as NOHUGEPAGE prior to discard | 
|  | * however leaving it until after precopy means that most of the precopy | 
|  | * data is still THPd | 
|  | */ | 
|  | int postcopy_ram_prepare_discard(MigrationIncomingState *mis); | 
|  |  | 
|  | /* | 
|  | * Called at the start of each RAMBlock by the bitmap code. | 
|  | */ | 
|  | void postcopy_discard_send_init(MigrationState *ms, const char *name); | 
|  |  | 
|  | /* | 
|  | * Called by the bitmap code for each chunk to discard. | 
|  | * May send a discard message, may just leave it queued to | 
|  | * be sent later. | 
|  | * @start,@length: a range of pages in the migration bitmap in the | 
|  | *  RAM block passed to postcopy_discard_send_init() (length=1 is one page) | 
|  | */ | 
|  | void postcopy_discard_send_range(MigrationState *ms, unsigned long start, | 
|  | unsigned long length); | 
|  |  | 
|  | /* | 
|  | * Called at the end of each RAMBlock by the bitmap code. | 
|  | * Sends any outstanding discard messages. | 
|  | */ | 
|  | void postcopy_discard_send_finish(MigrationState *ms); | 
|  |  | 
|  | /* | 
|  | * Place a page (from) at (host) efficiently | 
|  | *    There are restrictions on how 'from' must be mapped, in general best | 
|  | *    to use other postcopy_ routines to allocate. | 
|  | * returns 0 on success | 
|  | */ | 
|  | int postcopy_place_page(MigrationIncomingState *mis, void *host, void *from, | 
|  | RAMBlock *rb); | 
|  |  | 
|  | /* | 
|  | * Place a zero page at (host) atomically | 
|  | * returns 0 on success | 
|  | */ | 
|  | int postcopy_place_page_zero(MigrationIncomingState *mis, void *host, | 
|  | RAMBlock *rb); | 
|  |  | 
|  | /* The current postcopy state is read/set by postcopy_state_get/set | 
|  | * which update it atomically. | 
|  | * The state is updated as postcopy messages are received, and | 
|  | * in general only one thread should be writing to the state at any one | 
|  | * time, initially the main thread and then the listen thread; | 
|  | * Corner cases are where either thread finishes early and/or errors. | 
|  | * The state is checked as messages are received to ensure that | 
|  | * the source is sending us messages in the correct order. | 
|  | * The state is also used by the RAM reception code to know if it | 
|  | * has to place pages atomically, and the cleanup code at the end of | 
|  | * the main thread to know if it has to delay cleanup until the end | 
|  | * of postcopy. | 
|  | */ | 
|  | typedef enum { | 
|  | POSTCOPY_INCOMING_NONE = 0,  /* Initial state - no postcopy */ | 
|  | POSTCOPY_INCOMING_ADVISE, | 
|  | POSTCOPY_INCOMING_DISCARD, | 
|  | POSTCOPY_INCOMING_LISTENING, | 
|  | POSTCOPY_INCOMING_RUNNING, | 
|  | POSTCOPY_INCOMING_END | 
|  | } PostcopyState; | 
|  |  | 
|  | PostcopyState postcopy_state_get(void); | 
|  | /* Set the state and return the old state */ | 
|  | PostcopyState postcopy_state_set(PostcopyState new_state); | 
|  |  | 
|  | void postcopy_fault_thread_notify(MigrationIncomingState *mis); | 
|  |  | 
|  | /* | 
|  | * To be called once at the start before any device initialisation | 
|  | */ | 
|  | void postcopy_infrastructure_init(void); | 
|  |  | 
|  | /* Add a notifier to a list to be called when checking whether the devices | 
|  | * can support postcopy. | 
|  | * It's data is a *PostcopyNotifyData | 
|  | * It should return 0 if OK, or a negative value on failure. | 
|  | * On failure it must set the data->errp to an error. | 
|  | * | 
|  | */ | 
|  | enum PostcopyNotifyReason { | 
|  | POSTCOPY_NOTIFY_PROBE = 0, | 
|  | POSTCOPY_NOTIFY_INBOUND_ADVISE, | 
|  | POSTCOPY_NOTIFY_INBOUND_LISTEN, | 
|  | POSTCOPY_NOTIFY_INBOUND_END, | 
|  | }; | 
|  |  | 
|  | struct PostcopyNotifyData { | 
|  | enum PostcopyNotifyReason reason; | 
|  | }; | 
|  |  | 
|  | void postcopy_add_notifier(NotifierWithReturn *nn); | 
|  | void postcopy_remove_notifier(NotifierWithReturn *n); | 
|  | /* Call the notifier list set by postcopy_add_start_notifier */ | 
|  | int postcopy_notify(enum PostcopyNotifyReason reason, Error **errp); | 
|  |  | 
|  | void postcopy_thread_create(MigrationIncomingState *mis, | 
|  | QemuThread *thread, const char *name, | 
|  | void *(*fn)(void *), int joinable); | 
|  |  | 
|  | struct PostCopyFD; | 
|  |  | 
|  | /* ufd is a pointer to the struct uffd_msg *TODO: more Portable! */ | 
|  | typedef int (*pcfdhandler)(struct PostCopyFD *pcfd, void *ufd); | 
|  | /* Notification to wake, either on place or on reception of | 
|  | * a fault on something that's already arrived (race) | 
|  | */ | 
|  | typedef int (*pcfdwake)(struct PostCopyFD *pcfd, RAMBlock *rb, uint64_t offset); | 
|  |  | 
|  | struct PostCopyFD { | 
|  | int fd; | 
|  | /* Data to pass to handler */ | 
|  | void *data; | 
|  | /* Handler to be called whenever we get a poll event */ | 
|  | pcfdhandler handler; | 
|  | /* Notification to wake shared client */ | 
|  | pcfdwake waker; | 
|  | /* A string to use in error messages */ | 
|  | const char *idstr; | 
|  | }; | 
|  |  | 
|  | /* Register a userfaultfd owned by an external process for | 
|  | * shared memory. | 
|  | */ | 
|  | void postcopy_register_shared_ufd(struct PostCopyFD *pcfd); | 
|  | void postcopy_unregister_shared_ufd(struct PostCopyFD *pcfd); | 
|  | /* Call each of the shared 'waker's registered telling them of | 
|  | * availability of a block. | 
|  | */ | 
|  | int postcopy_notify_shared_wake(RAMBlock *rb, uint64_t offset); | 
|  | /* postcopy_wake_shared: Notify a client ufd that a page is available | 
|  | * | 
|  | * Returns 0 on success | 
|  | * | 
|  | * @pcfd: Structure with fd, handler and name as above | 
|  | * @client_addr: Address in the client program, not QEMU | 
|  | * @rb: The RAMBlock the page is in | 
|  | */ | 
|  | int postcopy_wake_shared(struct PostCopyFD *pcfd, uint64_t client_addr, | 
|  | RAMBlock *rb); | 
|  | /* Callback from shared fault handlers to ask for a page */ | 
|  | int postcopy_request_shared_page(struct PostCopyFD *pcfd, RAMBlock *rb, | 
|  | uint64_t client_addr, uint64_t offset); | 
|  |  | 
|  | /* Hard-code channels for now for postcopy preemption */ | 
|  | enum PostcopyChannels { | 
|  | RAM_CHANNEL_PRECOPY = 0, | 
|  | RAM_CHANNEL_POSTCOPY = 1, | 
|  | RAM_CHANNEL_MAX, | 
|  | }; | 
|  |  | 
|  | void postcopy_preempt_new_channel(MigrationIncomingState *mis, QEMUFile *file); | 
|  | void postcopy_preempt_setup(MigrationState *s); | 
|  | int postcopy_preempt_establish_channel(MigrationState *s); | 
|  | bool postcopy_is_paused(MigrationStatus status); | 
|  |  | 
|  | #endif |