| /* |
| * Copyright (c) 2018 Jean-Christophe Dubois <jcd@tribudubois.net> |
| * |
| * i.MX6UL SOC emulation. |
| * |
| * Based on hw/arm/fsl-imx7.c |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qapi/error.h" |
| #include "hw/arm/fsl-imx6ul.h" |
| #include "hw/misc/unimp.h" |
| #include "hw/usb/imx-usb-phy.h" |
| #include "hw/boards.h" |
| #include "sysemu/sysemu.h" |
| #include "qemu/error-report.h" |
| #include "qemu/module.h" |
| |
| #define NAME_SIZE 20 |
| |
| static void fsl_imx6ul_init(Object *obj) |
| { |
| FslIMX6ULState *s = FSL_IMX6UL(obj); |
| char name[NAME_SIZE]; |
| int i; |
| |
| object_initialize_child(obj, "cpu0", &s->cpu, |
| ARM_CPU_TYPE_NAME("cortex-a7")); |
| |
| /* |
| * A7MPCORE |
| */ |
| object_initialize_child(obj, "a7mpcore", &s->a7mpcore, |
| TYPE_A15MPCORE_PRIV); |
| |
| /* |
| * CCM |
| */ |
| object_initialize_child(obj, "ccm", &s->ccm, TYPE_IMX6UL_CCM); |
| |
| /* |
| * SRC |
| */ |
| object_initialize_child(obj, "src", &s->src, TYPE_IMX6_SRC); |
| |
| /* |
| * GPCv2 |
| */ |
| object_initialize_child(obj, "gpcv2", &s->gpcv2, TYPE_IMX_GPCV2); |
| |
| /* |
| * SNVS |
| */ |
| object_initialize_child(obj, "snvs", &s->snvs, TYPE_IMX7_SNVS); |
| |
| /* |
| * GPR |
| */ |
| object_initialize_child(obj, "gpr", &s->gpr, TYPE_IMX7_GPR); |
| |
| /* |
| * GPIOs 1 to 5 |
| */ |
| for (i = 0; i < FSL_IMX6UL_NUM_GPIOS; i++) { |
| snprintf(name, NAME_SIZE, "gpio%d", i); |
| object_initialize_child(obj, name, &s->gpio[i], TYPE_IMX_GPIO); |
| } |
| |
| /* |
| * GPT 1, 2 |
| */ |
| for (i = 0; i < FSL_IMX6UL_NUM_GPTS; i++) { |
| snprintf(name, NAME_SIZE, "gpt%d", i); |
| object_initialize_child(obj, name, &s->gpt[i], TYPE_IMX6UL_GPT); |
| } |
| |
| /* |
| * EPIT 1, 2 |
| */ |
| for (i = 0; i < FSL_IMX6UL_NUM_EPITS; i++) { |
| snprintf(name, NAME_SIZE, "epit%d", i + 1); |
| object_initialize_child(obj, name, &s->epit[i], TYPE_IMX_EPIT); |
| } |
| |
| /* |
| * eCSPI |
| */ |
| for (i = 0; i < FSL_IMX6UL_NUM_ECSPIS; i++) { |
| snprintf(name, NAME_SIZE, "spi%d", i + 1); |
| object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI); |
| } |
| |
| /* |
| * I2C |
| */ |
| for (i = 0; i < FSL_IMX6UL_NUM_I2CS; i++) { |
| snprintf(name, NAME_SIZE, "i2c%d", i + 1); |
| object_initialize_child(obj, name, &s->i2c[i], TYPE_IMX_I2C); |
| } |
| |
| /* |
| * UART |
| */ |
| for (i = 0; i < FSL_IMX6UL_NUM_UARTS; i++) { |
| snprintf(name, NAME_SIZE, "uart%d", i); |
| object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); |
| } |
| |
| /* |
| * Ethernet |
| */ |
| for (i = 0; i < FSL_IMX6UL_NUM_ETHS; i++) { |
| snprintf(name, NAME_SIZE, "eth%d", i); |
| object_initialize_child(obj, name, &s->eth[i], TYPE_IMX_ENET); |
| } |
| |
| /* USB */ |
| for (i = 0; i < FSL_IMX6UL_NUM_USB_PHYS; i++) { |
| snprintf(name, NAME_SIZE, "usbphy%d", i); |
| object_initialize_child(obj, name, &s->usbphy[i], TYPE_IMX_USBPHY); |
| } |
| for (i = 0; i < FSL_IMX6UL_NUM_USBS; i++) { |
| snprintf(name, NAME_SIZE, "usb%d", i); |
| object_initialize_child(obj, name, &s->usb[i], TYPE_CHIPIDEA); |
| } |
| |
| /* |
| * SDHCI |
| */ |
| for (i = 0; i < FSL_IMX6UL_NUM_USDHCS; i++) { |
| snprintf(name, NAME_SIZE, "usdhc%d", i); |
| object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC); |
| } |
| |
| /* |
| * Watchdog |
| */ |
| for (i = 0; i < FSL_IMX6UL_NUM_WDTS; i++) { |
| snprintf(name, NAME_SIZE, "wdt%d", i); |
| object_initialize_child(obj, name, &s->wdt[i], TYPE_IMX2_WDT); |
| } |
| } |
| |
| static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) |
| { |
| MachineState *ms = MACHINE(qdev_get_machine()); |
| FslIMX6ULState *s = FSL_IMX6UL(dev); |
| int i; |
| char name[NAME_SIZE]; |
| SysBusDevice *sbd; |
| DeviceState *d; |
| |
| if (ms->smp.cpus > 1) { |
| error_setg(errp, "%s: Only a single CPU is supported (%d requested)", |
| TYPE_FSL_IMX6UL, ms->smp.cpus); |
| return; |
| } |
| |
| qdev_realize(DEVICE(&s->cpu), NULL, &error_abort); |
| |
| /* |
| * A7MPCORE |
| */ |
| object_property_set_int(OBJECT(&s->a7mpcore), "num-cpu", 1, &error_abort); |
| object_property_set_int(OBJECT(&s->a7mpcore), "num-irq", |
| FSL_IMX6UL_MAX_IRQ + GIC_INTERNAL, &error_abort); |
| sysbus_realize(SYS_BUS_DEVICE(&s->a7mpcore), &error_abort); |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->a7mpcore), 0, FSL_IMX6UL_A7MPCORE_ADDR); |
| |
| sbd = SYS_BUS_DEVICE(&s->a7mpcore); |
| d = DEVICE(&s->cpu); |
| |
| sysbus_connect_irq(sbd, 0, qdev_get_gpio_in(d, ARM_CPU_IRQ)); |
| sysbus_connect_irq(sbd, 1, qdev_get_gpio_in(d, ARM_CPU_FIQ)); |
| sysbus_connect_irq(sbd, 2, qdev_get_gpio_in(d, ARM_CPU_VIRQ)); |
| sysbus_connect_irq(sbd, 3, qdev_get_gpio_in(d, ARM_CPU_VFIQ)); |
| |
| /* |
| * A7MPCORE DAP |
| */ |
| create_unimplemented_device("a7mpcore-dap", FSL_IMX6UL_A7MPCORE_DAP_ADDR, |
| 0x100000); |
| |
| /* |
| * GPT 1, 2 |
| */ |
| for (i = 0; i < FSL_IMX6UL_NUM_GPTS; i++) { |
| static const hwaddr FSL_IMX6UL_GPTn_ADDR[FSL_IMX6UL_NUM_GPTS] = { |
| FSL_IMX6UL_GPT1_ADDR, |
| FSL_IMX6UL_GPT2_ADDR, |
| }; |
| |
| static const int FSL_IMX6UL_GPTn_IRQ[FSL_IMX6UL_NUM_GPTS] = { |
| FSL_IMX6UL_GPT1_IRQ, |
| FSL_IMX6UL_GPT2_IRQ, |
| }; |
| |
| s->gpt[i].ccm = IMX_CCM(&s->ccm); |
| sysbus_realize(SYS_BUS_DEVICE(&s->gpt[i]), &error_abort); |
| |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpt[i]), 0, |
| FSL_IMX6UL_GPTn_ADDR[i]); |
| |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpt[i]), 0, |
| qdev_get_gpio_in(DEVICE(&s->a7mpcore), |
| FSL_IMX6UL_GPTn_IRQ[i])); |
| } |
| |
| /* |
| * EPIT 1, 2 |
| */ |
| for (i = 0; i < FSL_IMX6UL_NUM_EPITS; i++) { |
| static const hwaddr FSL_IMX6UL_EPITn_ADDR[FSL_IMX6UL_NUM_EPITS] = { |
| FSL_IMX6UL_EPIT1_ADDR, |
| FSL_IMX6UL_EPIT2_ADDR, |
| }; |
| |
| static const int FSL_IMX6UL_EPITn_IRQ[FSL_IMX6UL_NUM_EPITS] = { |
| FSL_IMX6UL_EPIT1_IRQ, |
| FSL_IMX6UL_EPIT2_IRQ, |
| }; |
| |
| s->epit[i].ccm = IMX_CCM(&s->ccm); |
| sysbus_realize(SYS_BUS_DEVICE(&s->epit[i]), &error_abort); |
| |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->epit[i]), 0, |
| FSL_IMX6UL_EPITn_ADDR[i]); |
| |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->epit[i]), 0, |
| qdev_get_gpio_in(DEVICE(&s->a7mpcore), |
| FSL_IMX6UL_EPITn_IRQ[i])); |
| } |
| |
| /* |
| * GPIO |
| */ |
| for (i = 0; i < FSL_IMX6UL_NUM_GPIOS; i++) { |
| static const hwaddr FSL_IMX6UL_GPIOn_ADDR[FSL_IMX6UL_NUM_GPIOS] = { |
| FSL_IMX6UL_GPIO1_ADDR, |
| FSL_IMX6UL_GPIO2_ADDR, |
| FSL_IMX6UL_GPIO3_ADDR, |
| FSL_IMX6UL_GPIO4_ADDR, |
| FSL_IMX6UL_GPIO5_ADDR, |
| }; |
| |
| static const int FSL_IMX6UL_GPIOn_LOW_IRQ[FSL_IMX6UL_NUM_GPIOS] = { |
| FSL_IMX6UL_GPIO1_LOW_IRQ, |
| FSL_IMX6UL_GPIO2_LOW_IRQ, |
| FSL_IMX6UL_GPIO3_LOW_IRQ, |
| FSL_IMX6UL_GPIO4_LOW_IRQ, |
| FSL_IMX6UL_GPIO5_LOW_IRQ, |
| }; |
| |
| static const int FSL_IMX6UL_GPIOn_HIGH_IRQ[FSL_IMX6UL_NUM_GPIOS] = { |
| FSL_IMX6UL_GPIO1_HIGH_IRQ, |
| FSL_IMX6UL_GPIO2_HIGH_IRQ, |
| FSL_IMX6UL_GPIO3_HIGH_IRQ, |
| FSL_IMX6UL_GPIO4_HIGH_IRQ, |
| FSL_IMX6UL_GPIO5_HIGH_IRQ, |
| }; |
| |
| sysbus_realize(SYS_BUS_DEVICE(&s->gpio[i]), &error_abort); |
| |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio[i]), 0, |
| FSL_IMX6UL_GPIOn_ADDR[i]); |
| |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 0, |
| qdev_get_gpio_in(DEVICE(&s->a7mpcore), |
| FSL_IMX6UL_GPIOn_LOW_IRQ[i])); |
| |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 1, |
| qdev_get_gpio_in(DEVICE(&s->a7mpcore), |
| FSL_IMX6UL_GPIOn_HIGH_IRQ[i])); |
| } |
| |
| /* |
| * IOMUXC and IOMUXC_GPR |
| */ |
| for (i = 0; i < 1; i++) { |
| static const hwaddr FSL_IMX6UL_IOMUXCn_ADDR[FSL_IMX6UL_NUM_IOMUXCS] = { |
| FSL_IMX6UL_IOMUXC_ADDR, |
| FSL_IMX6UL_IOMUXC_GPR_ADDR, |
| }; |
| |
| snprintf(name, NAME_SIZE, "iomuxc%d", i); |
| create_unimplemented_device(name, FSL_IMX6UL_IOMUXCn_ADDR[i], 0x4000); |
| } |
| |
| /* |
| * CCM |
| */ |
| sysbus_realize(SYS_BUS_DEVICE(&s->ccm), &error_abort); |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccm), 0, FSL_IMX6UL_CCM_ADDR); |
| |
| /* |
| * SRC |
| */ |
| sysbus_realize(SYS_BUS_DEVICE(&s->src), &error_abort); |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->src), 0, FSL_IMX6UL_SRC_ADDR); |
| |
| /* |
| * GPCv2 |
| */ |
| sysbus_realize(SYS_BUS_DEVICE(&s->gpcv2), &error_abort); |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpcv2), 0, FSL_IMX6UL_GPC_ADDR); |
| |
| /* Initialize all ECSPI */ |
| for (i = 0; i < FSL_IMX6UL_NUM_ECSPIS; i++) { |
| static const hwaddr FSL_IMX6UL_SPIn_ADDR[FSL_IMX6UL_NUM_ECSPIS] = { |
| FSL_IMX6UL_ECSPI1_ADDR, |
| FSL_IMX6UL_ECSPI2_ADDR, |
| FSL_IMX6UL_ECSPI3_ADDR, |
| FSL_IMX6UL_ECSPI4_ADDR, |
| }; |
| |
| static const int FSL_IMX6UL_SPIn_IRQ[FSL_IMX6UL_NUM_ECSPIS] = { |
| FSL_IMX6UL_ECSPI1_IRQ, |
| FSL_IMX6UL_ECSPI2_IRQ, |
| FSL_IMX6UL_ECSPI3_IRQ, |
| FSL_IMX6UL_ECSPI4_IRQ, |
| }; |
| |
| /* Initialize the SPI */ |
| sysbus_realize(SYS_BUS_DEVICE(&s->spi[i]), &error_abort); |
| |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, |
| FSL_IMX6UL_SPIn_ADDR[i]); |
| |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0, |
| qdev_get_gpio_in(DEVICE(&s->a7mpcore), |
| FSL_IMX6UL_SPIn_IRQ[i])); |
| } |
| |
| /* |
| * I2C |
| */ |
| for (i = 0; i < FSL_IMX6UL_NUM_I2CS; i++) { |
| static const hwaddr FSL_IMX6UL_I2Cn_ADDR[FSL_IMX6UL_NUM_I2CS] = { |
| FSL_IMX6UL_I2C1_ADDR, |
| FSL_IMX6UL_I2C2_ADDR, |
| FSL_IMX6UL_I2C3_ADDR, |
| FSL_IMX6UL_I2C4_ADDR, |
| }; |
| |
| static const int FSL_IMX6UL_I2Cn_IRQ[FSL_IMX6UL_NUM_I2CS] = { |
| FSL_IMX6UL_I2C1_IRQ, |
| FSL_IMX6UL_I2C2_IRQ, |
| FSL_IMX6UL_I2C3_IRQ, |
| FSL_IMX6UL_I2C4_IRQ, |
| }; |
| |
| sysbus_realize(SYS_BUS_DEVICE(&s->i2c[i]), &error_abort); |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c[i]), 0, FSL_IMX6UL_I2Cn_ADDR[i]); |
| |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c[i]), 0, |
| qdev_get_gpio_in(DEVICE(&s->a7mpcore), |
| FSL_IMX6UL_I2Cn_IRQ[i])); |
| } |
| |
| /* |
| * UART |
| */ |
| for (i = 0; i < FSL_IMX6UL_NUM_UARTS; i++) { |
| static const hwaddr FSL_IMX6UL_UARTn_ADDR[FSL_IMX6UL_NUM_UARTS] = { |
| FSL_IMX6UL_UART1_ADDR, |
| FSL_IMX6UL_UART2_ADDR, |
| FSL_IMX6UL_UART3_ADDR, |
| FSL_IMX6UL_UART4_ADDR, |
| FSL_IMX6UL_UART5_ADDR, |
| FSL_IMX6UL_UART6_ADDR, |
| FSL_IMX6UL_UART7_ADDR, |
| FSL_IMX6UL_UART8_ADDR, |
| }; |
| |
| static const int FSL_IMX6UL_UARTn_IRQ[FSL_IMX6UL_NUM_UARTS] = { |
| FSL_IMX6UL_UART1_IRQ, |
| FSL_IMX6UL_UART2_IRQ, |
| FSL_IMX6UL_UART3_IRQ, |
| FSL_IMX6UL_UART4_IRQ, |
| FSL_IMX6UL_UART5_IRQ, |
| FSL_IMX6UL_UART6_IRQ, |
| FSL_IMX6UL_UART7_IRQ, |
| FSL_IMX6UL_UART8_IRQ, |
| }; |
| |
| qdev_prop_set_chr(DEVICE(&s->uart[i]), "chardev", serial_hd(i)); |
| |
| sysbus_realize(SYS_BUS_DEVICE(&s->uart[i]), &error_abort); |
| |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->uart[i]), 0, |
| FSL_IMX6UL_UARTn_ADDR[i]); |
| |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->uart[i]), 0, |
| qdev_get_gpio_in(DEVICE(&s->a7mpcore), |
| FSL_IMX6UL_UARTn_IRQ[i])); |
| } |
| |
| /* |
| * Ethernet |
| */ |
| for (i = 0; i < FSL_IMX6UL_NUM_ETHS; i++) { |
| static const hwaddr FSL_IMX6UL_ENETn_ADDR[FSL_IMX6UL_NUM_ETHS] = { |
| FSL_IMX6UL_ENET1_ADDR, |
| FSL_IMX6UL_ENET2_ADDR, |
| }; |
| |
| static const int FSL_IMX6UL_ENETn_IRQ[FSL_IMX6UL_NUM_ETHS] = { |
| FSL_IMX6UL_ENET1_IRQ, |
| FSL_IMX6UL_ENET2_IRQ, |
| }; |
| |
| static const int FSL_IMX6UL_ENETn_TIMER_IRQ[FSL_IMX6UL_NUM_ETHS] = { |
| FSL_IMX6UL_ENET1_TIMER_IRQ, |
| FSL_IMX6UL_ENET2_TIMER_IRQ, |
| }; |
| |
| object_property_set_uint(OBJECT(&s->eth[i]), "phy-num", |
| s->phy_num[i], &error_abort); |
| object_property_set_uint(OBJECT(&s->eth[i]), "tx-ring-num", |
| FSL_IMX6UL_ETH_NUM_TX_RINGS, &error_abort); |
| qdev_set_nic_properties(DEVICE(&s->eth[i]), &nd_table[i]); |
| sysbus_realize(SYS_BUS_DEVICE(&s->eth[i]), &error_abort); |
| |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->eth[i]), 0, |
| FSL_IMX6UL_ENETn_ADDR[i]); |
| |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->eth[i]), 0, |
| qdev_get_gpio_in(DEVICE(&s->a7mpcore), |
| FSL_IMX6UL_ENETn_IRQ[i])); |
| |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->eth[i]), 1, |
| qdev_get_gpio_in(DEVICE(&s->a7mpcore), |
| FSL_IMX6UL_ENETn_TIMER_IRQ[i])); |
| } |
| |
| /* USB */ |
| for (i = 0; i < FSL_IMX6UL_NUM_USB_PHYS; i++) { |
| sysbus_realize(SYS_BUS_DEVICE(&s->usbphy[i]), &error_abort); |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->usbphy[i]), 0, |
| FSL_IMX6UL_USBPHY1_ADDR + i * 0x1000); |
| } |
| |
| for (i = 0; i < FSL_IMX6UL_NUM_USBS; i++) { |
| static const int FSL_IMX6UL_USBn_IRQ[] = { |
| FSL_IMX6UL_USB1_IRQ, |
| FSL_IMX6UL_USB2_IRQ, |
| }; |
| sysbus_realize(SYS_BUS_DEVICE(&s->usb[i]), &error_abort); |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->usb[i]), 0, |
| FSL_IMX6UL_USBO2_USB_ADDR + i * 0x200); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->usb[i]), 0, |
| qdev_get_gpio_in(DEVICE(&s->a7mpcore), |
| FSL_IMX6UL_USBn_IRQ[i])); |
| } |
| |
| /* |
| * USDHC |
| */ |
| for (i = 0; i < FSL_IMX6UL_NUM_USDHCS; i++) { |
| static const hwaddr FSL_IMX6UL_USDHCn_ADDR[FSL_IMX6UL_NUM_USDHCS] = { |
| FSL_IMX6UL_USDHC1_ADDR, |
| FSL_IMX6UL_USDHC2_ADDR, |
| }; |
| |
| static const int FSL_IMX6UL_USDHCn_IRQ[FSL_IMX6UL_NUM_USDHCS] = { |
| FSL_IMX6UL_USDHC1_IRQ, |
| FSL_IMX6UL_USDHC2_IRQ, |
| }; |
| |
| object_property_set_uint(OBJECT(&s->usdhc[i]), "vendor", |
| SDHCI_VENDOR_IMX, &error_abort); |
| sysbus_realize(SYS_BUS_DEVICE(&s->usdhc[i]), &error_abort); |
| |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->usdhc[i]), 0, |
| FSL_IMX6UL_USDHCn_ADDR[i]); |
| |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->usdhc[i]), 0, |
| qdev_get_gpio_in(DEVICE(&s->a7mpcore), |
| FSL_IMX6UL_USDHCn_IRQ[i])); |
| } |
| |
| /* |
| * SNVS |
| */ |
| sysbus_realize(SYS_BUS_DEVICE(&s->snvs), &error_abort); |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, FSL_IMX6UL_SNVS_HP_ADDR); |
| |
| /* |
| * Watchdog |
| */ |
| for (i = 0; i < FSL_IMX6UL_NUM_WDTS; i++) { |
| static const hwaddr FSL_IMX6UL_WDOGn_ADDR[FSL_IMX6UL_NUM_WDTS] = { |
| FSL_IMX6UL_WDOG1_ADDR, |
| FSL_IMX6UL_WDOG2_ADDR, |
| FSL_IMX6UL_WDOG3_ADDR, |
| }; |
| static const int FSL_IMX6UL_WDOGn_IRQ[FSL_IMX6UL_NUM_WDTS] = { |
| FSL_IMX6UL_WDOG1_IRQ, |
| FSL_IMX6UL_WDOG2_IRQ, |
| FSL_IMX6UL_WDOG3_IRQ, |
| }; |
| |
| object_property_set_bool(OBJECT(&s->wdt[i]), "pretimeout-support", |
| true, &error_abort); |
| sysbus_realize(SYS_BUS_DEVICE(&s->wdt[i]), &error_abort); |
| |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0, |
| FSL_IMX6UL_WDOGn_ADDR[i]); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->wdt[i]), 0, |
| qdev_get_gpio_in(DEVICE(&s->a7mpcore), |
| FSL_IMX6UL_WDOGn_IRQ[i])); |
| } |
| |
| /* |
| * GPR |
| */ |
| sysbus_realize(SYS_BUS_DEVICE(&s->gpr), &error_abort); |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpr), 0, FSL_IMX6UL_IOMUXC_GPR_ADDR); |
| |
| /* |
| * SDMA |
| */ |
| create_unimplemented_device("sdma", FSL_IMX6UL_SDMA_ADDR, 0x4000); |
| |
| /* |
| * SAI (Audio SSI (Synchronous Serial Interface)) |
| */ |
| create_unimplemented_device("sai1", FSL_IMX6UL_SAI1_ADDR, 0x4000); |
| create_unimplemented_device("sai2", FSL_IMX6UL_SAI2_ADDR, 0x4000); |
| create_unimplemented_device("sai3", FSL_IMX6UL_SAI3_ADDR, 0x4000); |
| |
| /* |
| * PWM |
| */ |
| create_unimplemented_device("pwm1", FSL_IMX6UL_PWM1_ADDR, 0x4000); |
| create_unimplemented_device("pwm2", FSL_IMX6UL_PWM2_ADDR, 0x4000); |
| create_unimplemented_device("pwm3", FSL_IMX6UL_PWM3_ADDR, 0x4000); |
| create_unimplemented_device("pwm4", FSL_IMX6UL_PWM4_ADDR, 0x4000); |
| |
| /* |
| * Audio ASRC (asynchronous sample rate converter) |
| */ |
| create_unimplemented_device("asrc", FSL_IMX6UL_ASRC_ADDR, 0x4000); |
| |
| /* |
| * CAN |
| */ |
| create_unimplemented_device("can1", FSL_IMX6UL_CAN1_ADDR, 0x4000); |
| create_unimplemented_device("can2", FSL_IMX6UL_CAN2_ADDR, 0x4000); |
| |
| /* |
| * APHB_DMA |
| */ |
| create_unimplemented_device("aphb_dma", FSL_IMX6UL_APBH_DMA_ADDR, |
| FSL_IMX6UL_APBH_DMA_SIZE); |
| |
| /* |
| * ADCs |
| */ |
| for (i = 0; i < FSL_IMX6UL_NUM_ADCS; i++) { |
| static const hwaddr FSL_IMX6UL_ADCn_ADDR[FSL_IMX6UL_NUM_ADCS] = { |
| FSL_IMX6UL_ADC1_ADDR, |
| FSL_IMX6UL_ADC2_ADDR, |
| }; |
| |
| snprintf(name, NAME_SIZE, "adc%d", i); |
| create_unimplemented_device(name, FSL_IMX6UL_ADCn_ADDR[i], 0x4000); |
| } |
| |
| /* |
| * LCD |
| */ |
| create_unimplemented_device("lcdif", FSL_IMX6UL_LCDIF_ADDR, 0x4000); |
| |
| /* |
| * ROM memory |
| */ |
| memory_region_init_rom(&s->rom, OBJECT(dev), "imx6ul.rom", |
| FSL_IMX6UL_ROM_SIZE, &error_abort); |
| memory_region_add_subregion(get_system_memory(), FSL_IMX6UL_ROM_ADDR, |
| &s->rom); |
| |
| /* |
| * CAAM memory |
| */ |
| memory_region_init_rom(&s->caam, OBJECT(dev), "imx6ul.caam", |
| FSL_IMX6UL_CAAM_MEM_SIZE, &error_abort); |
| memory_region_add_subregion(get_system_memory(), FSL_IMX6UL_CAAM_MEM_ADDR, |
| &s->caam); |
| |
| /* |
| * OCRAM memory |
| */ |
| memory_region_init_ram(&s->ocram, NULL, "imx6ul.ocram", |
| FSL_IMX6UL_OCRAM_MEM_SIZE, |
| &error_abort); |
| memory_region_add_subregion(get_system_memory(), FSL_IMX6UL_OCRAM_MEM_ADDR, |
| &s->ocram); |
| |
| /* |
| * internal OCRAM (128 KB) is aliased over 512 KB |
| */ |
| memory_region_init_alias(&s->ocram_alias, OBJECT(dev), |
| "imx6ul.ocram_alias", &s->ocram, 0, |
| FSL_IMX6UL_OCRAM_ALIAS_SIZE); |
| memory_region_add_subregion(get_system_memory(), |
| FSL_IMX6UL_OCRAM_ALIAS_ADDR, &s->ocram_alias); |
| } |
| |
| static Property fsl_imx6ul_properties[] = { |
| DEFINE_PROP_UINT32("fec1-phy-num", FslIMX6ULState, phy_num[0], 0), |
| DEFINE_PROP_UINT32("fec2-phy-num", FslIMX6ULState, phy_num[1], 1), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void fsl_imx6ul_class_init(ObjectClass *oc, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(oc); |
| |
| device_class_set_props(dc, fsl_imx6ul_properties); |
| dc->realize = fsl_imx6ul_realize; |
| dc->desc = "i.MX6UL SOC"; |
| /* Reason: Uses serial_hds and nd_table in realize() directly */ |
| dc->user_creatable = false; |
| } |
| |
| static const TypeInfo fsl_imx6ul_type_info = { |
| .name = TYPE_FSL_IMX6UL, |
| .parent = TYPE_DEVICE, |
| .instance_size = sizeof(FslIMX6ULState), |
| .instance_init = fsl_imx6ul_init, |
| .class_init = fsl_imx6ul_class_init, |
| }; |
| |
| static void fsl_imx6ul_register_types(void) |
| { |
| type_register_static(&fsl_imx6ul_type_info); |
| } |
| type_init(fsl_imx6ul_register_types) |