| /* |
| * Cortex-A9MPCore internal peripheral emulation. |
| * |
| * Copyright (c) 2009 CodeSourcery. |
| * Copyright (c) 2011 Linaro Limited. |
| * Written by Paul Brook, Peter Maydell. |
| * |
| * This code is licensed under the GPL. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qapi/error.h" |
| #include "qemu/module.h" |
| #include "hw/cpu/a9mpcore.h" |
| #include "hw/irq.h" |
| #include "hw/qdev-properties.h" |
| #include "hw/core/cpu.h" |
| #include "cpu.h" |
| |
| #define A9_GIC_NUM_PRIORITY_BITS 5 |
| |
| static void a9mp_priv_set_irq(void *opaque, int irq, int level) |
| { |
| A9MPPrivState *s = (A9MPPrivState *)opaque; |
| |
| qemu_set_irq(qdev_get_gpio_in(DEVICE(&s->gic), irq), level); |
| } |
| |
| static void a9mp_priv_initfn(Object *obj) |
| { |
| A9MPPrivState *s = A9MPCORE_PRIV(obj); |
| |
| memory_region_init(&s->container, obj, "a9mp-priv-container", 0x2000); |
| sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->container); |
| |
| object_initialize_child(obj, "scu", &s->scu, TYPE_A9_SCU); |
| |
| object_initialize_child(obj, "gic", &s->gic, TYPE_ARM_GIC); |
| |
| object_initialize_child(obj, "gtimer", &s->gtimer, TYPE_A9_GTIMER); |
| |
| object_initialize_child(obj, "mptimer", &s->mptimer, TYPE_ARM_MPTIMER); |
| |
| object_initialize_child(obj, "wdt", &s->wdt, TYPE_ARM_MPTIMER); |
| } |
| |
| static void a9mp_priv_realize(DeviceState *dev, Error **errp) |
| { |
| SysBusDevice *sbd = SYS_BUS_DEVICE(dev); |
| A9MPPrivState *s = A9MPCORE_PRIV(dev); |
| DeviceState *scudev, *gicdev, *gtimerdev, *mptimerdev, *wdtdev; |
| SysBusDevice *scubusdev, *gicbusdev, *gtimerbusdev, *mptimerbusdev, |
| *wdtbusdev; |
| int i; |
| bool has_el3; |
| CPUState *cpu0; |
| Object *cpuobj; |
| |
| cpu0 = qemu_get_cpu(0); |
| cpuobj = OBJECT(cpu0); |
| if (strcmp(object_get_typename(cpuobj), ARM_CPU_TYPE_NAME("cortex-a9"))) { |
| /* We might allow Cortex-A5 once we model it */ |
| error_setg(errp, |
| "Cortex-A9MPCore peripheral can only use Cortex-A9 CPU"); |
| return; |
| } |
| |
| scudev = DEVICE(&s->scu); |
| qdev_prop_set_uint32(scudev, "num-cpu", s->num_cpu); |
| if (!sysbus_realize(SYS_BUS_DEVICE(&s->scu), errp)) { |
| return; |
| } |
| scubusdev = SYS_BUS_DEVICE(&s->scu); |
| |
| gicdev = DEVICE(&s->gic); |
| qdev_prop_set_uint32(gicdev, "num-cpu", s->num_cpu); |
| qdev_prop_set_uint32(gicdev, "num-irq", s->num_irq); |
| qdev_prop_set_uint32(gicdev, "num-priority-bits", |
| A9_GIC_NUM_PRIORITY_BITS); |
| |
| /* Make the GIC's TZ support match the CPUs. We assume that |
| * either all the CPUs have TZ, or none do. |
| */ |
| has_el3 = object_property_find(cpuobj, "has_el3") && |
| object_property_get_bool(cpuobj, "has_el3", &error_abort); |
| qdev_prop_set_bit(gicdev, "has-security-extensions", has_el3); |
| |
| if (!sysbus_realize(SYS_BUS_DEVICE(&s->gic), errp)) { |
| return; |
| } |
| gicbusdev = SYS_BUS_DEVICE(&s->gic); |
| |
| /* Pass through outbound IRQ lines from the GIC */ |
| sysbus_pass_irq(sbd, gicbusdev); |
| |
| /* Pass through inbound GPIO lines to the GIC */ |
| qdev_init_gpio_in(dev, a9mp_priv_set_irq, s->num_irq - 32); |
| |
| gtimerdev = DEVICE(&s->gtimer); |
| qdev_prop_set_uint32(gtimerdev, "num-cpu", s->num_cpu); |
| if (!sysbus_realize(SYS_BUS_DEVICE(&s->gtimer), errp)) { |
| return; |
| } |
| gtimerbusdev = SYS_BUS_DEVICE(&s->gtimer); |
| |
| mptimerdev = DEVICE(&s->mptimer); |
| qdev_prop_set_uint32(mptimerdev, "num-cpu", s->num_cpu); |
| if (!sysbus_realize(SYS_BUS_DEVICE(&s->mptimer), errp)) { |
| return; |
| } |
| mptimerbusdev = SYS_BUS_DEVICE(&s->mptimer); |
| |
| wdtdev = DEVICE(&s->wdt); |
| qdev_prop_set_uint32(wdtdev, "num-cpu", s->num_cpu); |
| if (!sysbus_realize(SYS_BUS_DEVICE(&s->wdt), errp)) { |
| return; |
| } |
| wdtbusdev = SYS_BUS_DEVICE(&s->wdt); |
| |
| /* Memory map (addresses are offsets from PERIPHBASE): |
| * 0x0000-0x00ff -- Snoop Control Unit |
| * 0x0100-0x01ff -- GIC CPU interface |
| * 0x0200-0x02ff -- Global Timer |
| * 0x0300-0x05ff -- nothing |
| * 0x0600-0x06ff -- private timers and watchdogs |
| * 0x0700-0x0fff -- nothing |
| * 0x1000-0x1fff -- GIC Distributor |
| */ |
| memory_region_add_subregion(&s->container, 0, |
| sysbus_mmio_get_region(scubusdev, 0)); |
| /* GIC CPU interface */ |
| memory_region_add_subregion(&s->container, 0x100, |
| sysbus_mmio_get_region(gicbusdev, 1)); |
| memory_region_add_subregion(&s->container, 0x200, |
| sysbus_mmio_get_region(gtimerbusdev, 0)); |
| /* Note that the A9 exposes only the "timer/watchdog for this core" |
| * memory region, not the "timer/watchdog for core X" ones 11MPcore has. |
| */ |
| memory_region_add_subregion(&s->container, 0x600, |
| sysbus_mmio_get_region(mptimerbusdev, 0)); |
| memory_region_add_subregion(&s->container, 0x620, |
| sysbus_mmio_get_region(wdtbusdev, 0)); |
| memory_region_add_subregion(&s->container, 0x1000, |
| sysbus_mmio_get_region(gicbusdev, 0)); |
| |
| /* Wire up the interrupt from each watchdog and timer. |
| * For each core the global timer is PPI 27, the private |
| * timer is PPI 29 and the watchdog PPI 30. |
| */ |
| for (i = 0; i < s->num_cpu; i++) { |
| int ppibase = (s->num_irq - 32) + i * 32; |
| sysbus_connect_irq(gtimerbusdev, i, |
| qdev_get_gpio_in(gicdev, ppibase + 27)); |
| sysbus_connect_irq(mptimerbusdev, i, |
| qdev_get_gpio_in(gicdev, ppibase + 29)); |
| sysbus_connect_irq(wdtbusdev, i, |
| qdev_get_gpio_in(gicdev, ppibase + 30)); |
| } |
| } |
| |
| static Property a9mp_priv_properties[] = { |
| DEFINE_PROP_UINT32("num-cpu", A9MPPrivState, num_cpu, 1), |
| /* The Cortex-A9MP may have anything from 0 to 224 external interrupt |
| * IRQ lines (with another 32 internal). We default to 64+32, which |
| * is the number provided by the Cortex-A9MP test chip in the |
| * Realview PBX-A9 and Versatile Express A9 development boards. |
| * Other boards may differ and should set this property appropriately. |
| */ |
| DEFINE_PROP_UINT32("num-irq", A9MPPrivState, num_irq, 96), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void a9mp_priv_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| |
| dc->realize = a9mp_priv_realize; |
| device_class_set_props(dc, a9mp_priv_properties); |
| } |
| |
| static const TypeInfo a9mp_priv_info = { |
| .name = TYPE_A9MPCORE_PRIV, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(A9MPPrivState), |
| .instance_init = a9mp_priv_initfn, |
| .class_init = a9mp_priv_class_init, |
| }; |
| |
| static void a9mp_register_types(void) |
| { |
| type_register_static(&a9mp_priv_info); |
| } |
| |
| type_init(a9mp_register_types) |