| /* |
| * Xilinx Zynq cadence TTC model |
| * |
| * Copyright (c) 2011 Xilinx Inc. |
| * Copyright (c) 2012 Peter A.G. Crosthwaite (peter.crosthwaite@petalogix.com) |
| * Copyright (c) 2012 PetaLogix Pty Ltd. |
| * Written By Haibing Ma |
| * M. Habib |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include "hw/sysbus.h" |
| #include "qemu/timer.h" |
| |
| #ifdef CADENCE_TTC_ERR_DEBUG |
| #define DB_PRINT(...) do { \ |
| fprintf(stderr, ": %s: ", __func__); \ |
| fprintf(stderr, ## __VA_ARGS__); \ |
| } while (0); |
| #else |
| #define DB_PRINT(...) |
| #endif |
| |
| #define COUNTER_INTR_IV 0x00000001 |
| #define COUNTER_INTR_M1 0x00000002 |
| #define COUNTER_INTR_M2 0x00000004 |
| #define COUNTER_INTR_M3 0x00000008 |
| #define COUNTER_INTR_OV 0x00000010 |
| #define COUNTER_INTR_EV 0x00000020 |
| |
| #define COUNTER_CTRL_DIS 0x00000001 |
| #define COUNTER_CTRL_INT 0x00000002 |
| #define COUNTER_CTRL_DEC 0x00000004 |
| #define COUNTER_CTRL_MATCH 0x00000008 |
| #define COUNTER_CTRL_RST 0x00000010 |
| |
| #define CLOCK_CTRL_PS_EN 0x00000001 |
| #define CLOCK_CTRL_PS_V 0x0000001e |
| |
| typedef struct { |
| QEMUTimer *timer; |
| int freq; |
| |
| uint32_t reg_clock; |
| uint32_t reg_count; |
| uint32_t reg_value; |
| uint16_t reg_interval; |
| uint16_t reg_match[3]; |
| uint32_t reg_intr; |
| uint32_t reg_intr_en; |
| uint32_t reg_event_ctrl; |
| uint32_t reg_event; |
| |
| uint64_t cpu_time; |
| unsigned int cpu_time_valid; |
| |
| qemu_irq irq; |
| } CadenceTimerState; |
| |
| #define TYPE_CADENCE_TTC "cadence_ttc" |
| #define CADENCE_TTC(obj) \ |
| OBJECT_CHECK(CadenceTTCState, (obj), TYPE_CADENCE_TTC) |
| |
| typedef struct CadenceTTCState { |
| SysBusDevice parent_obj; |
| |
| MemoryRegion iomem; |
| CadenceTimerState timer[3]; |
| } CadenceTTCState; |
| |
| static void cadence_timer_update(CadenceTimerState *s) |
| { |
| qemu_set_irq(s->irq, !!(s->reg_intr & s->reg_intr_en)); |
| } |
| |
| static CadenceTimerState *cadence_timer_from_addr(void *opaque, |
| hwaddr offset) |
| { |
| unsigned int index; |
| CadenceTTCState *s = (CadenceTTCState *)opaque; |
| |
| index = (offset >> 2) % 3; |
| |
| return &s->timer[index]; |
| } |
| |
| static uint64_t cadence_timer_get_ns(CadenceTimerState *s, uint64_t timer_steps) |
| { |
| /* timer_steps has max value of 0x100000000. double check it |
| * (or overflow can happen below) */ |
| assert(timer_steps <= 1ULL << 32); |
| |
| uint64_t r = timer_steps * 1000000000ULL; |
| if (s->reg_clock & CLOCK_CTRL_PS_EN) { |
| r >>= 16 - (((s->reg_clock & CLOCK_CTRL_PS_V) >> 1) + 1); |
| } else { |
| r >>= 16; |
| } |
| r /= (uint64_t)s->freq; |
| return r; |
| } |
| |
| static uint64_t cadence_timer_get_steps(CadenceTimerState *s, uint64_t ns) |
| { |
| uint64_t to_divide = 1000000000ULL; |
| |
| uint64_t r = ns; |
| /* for very large intervals (> 8s) do some division first to stop |
| * overflow (costs some prescision) */ |
| while (r >= 8ULL << 30 && to_divide > 1) { |
| r /= 1000; |
| to_divide /= 1000; |
| } |
| r <<= 16; |
| /* keep early-dividing as needed */ |
| while (r >= 8ULL << 30 && to_divide > 1) { |
| r /= 1000; |
| to_divide /= 1000; |
| } |
| r *= (uint64_t)s->freq; |
| if (s->reg_clock & CLOCK_CTRL_PS_EN) { |
| r /= 1 << (((s->reg_clock & CLOCK_CTRL_PS_V) >> 1) + 1); |
| } |
| |
| r /= to_divide; |
| return r; |
| } |
| |
| /* determine if x is in between a and b, exclusive of a, inclusive of b */ |
| |
| static inline int64_t is_between(int64_t x, int64_t a, int64_t b) |
| { |
| if (a < b) { |
| return x > a && x <= b; |
| } |
| return x < a && x >= b; |
| } |
| |
| static void cadence_timer_run(CadenceTimerState *s) |
| { |
| int i; |
| int64_t event_interval, next_value; |
| |
| assert(s->cpu_time_valid); /* cadence_timer_sync must be called first */ |
| |
| if (s->reg_count & COUNTER_CTRL_DIS) { |
| s->cpu_time_valid = 0; |
| return; |
| } |
| |
| { /* figure out what's going to happen next (rollover or match) */ |
| int64_t interval = (uint64_t)((s->reg_count & COUNTER_CTRL_INT) ? |
| (int64_t)s->reg_interval + 1 : 0x10000ULL) << 16; |
| next_value = (s->reg_count & COUNTER_CTRL_DEC) ? -1ULL : interval; |
| for (i = 0; i < 3; ++i) { |
| int64_t cand = (uint64_t)s->reg_match[i] << 16; |
| if (is_between(cand, (uint64_t)s->reg_value, next_value)) { |
| next_value = cand; |
| } |
| } |
| } |
| DB_PRINT("next timer event value: %09llx\n", |
| (unsigned long long)next_value); |
| |
| event_interval = next_value - (int64_t)s->reg_value; |
| event_interval = (event_interval < 0) ? -event_interval : event_interval; |
| |
| qemu_mod_timer(s->timer, s->cpu_time + |
| cadence_timer_get_ns(s, event_interval)); |
| } |
| |
| static void cadence_timer_sync(CadenceTimerState *s) |
| { |
| int i; |
| int64_t r, x; |
| int64_t interval = ((s->reg_count & COUNTER_CTRL_INT) ? |
| (int64_t)s->reg_interval + 1 : 0x10000ULL) << 16; |
| uint64_t old_time = s->cpu_time; |
| |
| s->cpu_time = qemu_get_clock_ns(vm_clock); |
| DB_PRINT("cpu time: %lld ns\n", (long long)old_time); |
| |
| if (!s->cpu_time_valid || old_time == s->cpu_time) { |
| s->cpu_time_valid = 1; |
| return; |
| } |
| |
| r = (int64_t)cadence_timer_get_steps(s, s->cpu_time - old_time); |
| x = (int64_t)s->reg_value + ((s->reg_count & COUNTER_CTRL_DEC) ? -r : r); |
| |
| for (i = 0; i < 3; ++i) { |
| int64_t m = (int64_t)s->reg_match[i] << 16; |
| if (m > interval) { |
| continue; |
| } |
| /* check to see if match event has occurred. check m +/- interval |
| * to account for match events in wrap around cases */ |
| if (is_between(m, s->reg_value, x) || |
| is_between(m + interval, s->reg_value, x) || |
| is_between(m - interval, s->reg_value, x)) { |
| s->reg_intr |= (2 << i); |
| } |
| } |
| while (x < 0) { |
| x += interval; |
| } |
| s->reg_value = (uint32_t)(x % interval); |
| |
| if (s->reg_value != x) { |
| s->reg_intr |= (s->reg_count & COUNTER_CTRL_INT) ? |
| COUNTER_INTR_IV : COUNTER_INTR_OV; |
| } |
| cadence_timer_update(s); |
| } |
| |
| static void cadence_timer_tick(void *opaque) |
| { |
| CadenceTimerState *s = opaque; |
| |
| DB_PRINT("\n"); |
| cadence_timer_sync(s); |
| cadence_timer_run(s); |
| } |
| |
| static uint32_t cadence_ttc_read_imp(void *opaque, hwaddr offset) |
| { |
| CadenceTimerState *s = cadence_timer_from_addr(opaque, offset); |
| uint32_t value; |
| |
| cadence_timer_sync(s); |
| cadence_timer_run(s); |
| |
| switch (offset) { |
| case 0x00: /* clock control */ |
| case 0x04: |
| case 0x08: |
| return s->reg_clock; |
| |
| case 0x0c: /* counter control */ |
| case 0x10: |
| case 0x14: |
| return s->reg_count; |
| |
| case 0x18: /* counter value */ |
| case 0x1c: |
| case 0x20: |
| return (uint16_t)(s->reg_value >> 16); |
| |
| case 0x24: /* reg_interval counter */ |
| case 0x28: |
| case 0x2c: |
| return s->reg_interval; |
| |
| case 0x30: /* match 1 counter */ |
| case 0x34: |
| case 0x38: |
| return s->reg_match[0]; |
| |
| case 0x3c: /* match 2 counter */ |
| case 0x40: |
| case 0x44: |
| return s->reg_match[1]; |
| |
| case 0x48: /* match 3 counter */ |
| case 0x4c: |
| case 0x50: |
| return s->reg_match[2]; |
| |
| case 0x54: /* interrupt register */ |
| case 0x58: |
| case 0x5c: |
| /* cleared after read */ |
| value = s->reg_intr; |
| s->reg_intr = 0; |
| cadence_timer_update(s); |
| return value; |
| |
| case 0x60: /* interrupt enable */ |
| case 0x64: |
| case 0x68: |
| return s->reg_intr_en; |
| |
| case 0x6c: |
| case 0x70: |
| case 0x74: |
| return s->reg_event_ctrl; |
| |
| case 0x78: |
| case 0x7c: |
| case 0x80: |
| return s->reg_event; |
| |
| default: |
| return 0; |
| } |
| } |
| |
| static uint64_t cadence_ttc_read(void *opaque, hwaddr offset, |
| unsigned size) |
| { |
| uint32_t ret = cadence_ttc_read_imp(opaque, offset); |
| |
| DB_PRINT("addr: %08x data: %08x\n", (unsigned)offset, (unsigned)ret); |
| return ret; |
| } |
| |
| static void cadence_ttc_write(void *opaque, hwaddr offset, |
| uint64_t value, unsigned size) |
| { |
| CadenceTimerState *s = cadence_timer_from_addr(opaque, offset); |
| |
| DB_PRINT("addr: %08x data %08x\n", (unsigned)offset, (unsigned)value); |
| |
| cadence_timer_sync(s); |
| |
| switch (offset) { |
| case 0x00: /* clock control */ |
| case 0x04: |
| case 0x08: |
| s->reg_clock = value & 0x3F; |
| break; |
| |
| case 0x0c: /* counter control */ |
| case 0x10: |
| case 0x14: |
| if (value & COUNTER_CTRL_RST) { |
| s->reg_value = 0; |
| } |
| s->reg_count = value & 0x3f & ~COUNTER_CTRL_RST; |
| break; |
| |
| case 0x24: /* interval register */ |
| case 0x28: |
| case 0x2c: |
| s->reg_interval = value & 0xffff; |
| break; |
| |
| case 0x30: /* match register */ |
| case 0x34: |
| case 0x38: |
| s->reg_match[0] = value & 0xffff; |
| |
| case 0x3c: /* match register */ |
| case 0x40: |
| case 0x44: |
| s->reg_match[1] = value & 0xffff; |
| |
| case 0x48: /* match register */ |
| case 0x4c: |
| case 0x50: |
| s->reg_match[2] = value & 0xffff; |
| break; |
| |
| case 0x54: /* interrupt register */ |
| case 0x58: |
| case 0x5c: |
| break; |
| |
| case 0x60: /* interrupt enable */ |
| case 0x64: |
| case 0x68: |
| s->reg_intr_en = value & 0x3f; |
| break; |
| |
| case 0x6c: /* event control */ |
| case 0x70: |
| case 0x74: |
| s->reg_event_ctrl = value & 0x07; |
| break; |
| |
| default: |
| return; |
| } |
| |
| cadence_timer_run(s); |
| cadence_timer_update(s); |
| } |
| |
| static const MemoryRegionOps cadence_ttc_ops = { |
| .read = cadence_ttc_read, |
| .write = cadence_ttc_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static void cadence_timer_reset(CadenceTimerState *s) |
| { |
| s->reg_count = 0x21; |
| } |
| |
| static void cadence_timer_init(uint32_t freq, CadenceTimerState *s) |
| { |
| memset(s, 0, sizeof(CadenceTimerState)); |
| s->freq = freq; |
| |
| cadence_timer_reset(s); |
| |
| s->timer = qemu_new_timer_ns(vm_clock, cadence_timer_tick, s); |
| } |
| |
| static int cadence_ttc_init(SysBusDevice *dev) |
| { |
| CadenceTTCState *s = CADENCE_TTC(dev); |
| int i; |
| |
| for (i = 0; i < 3; ++i) { |
| cadence_timer_init(133000000, &s->timer[i]); |
| sysbus_init_irq(dev, &s->timer[i].irq); |
| } |
| |
| memory_region_init_io(&s->iomem, OBJECT(s), &cadence_ttc_ops, s, |
| "timer", 0x1000); |
| sysbus_init_mmio(dev, &s->iomem); |
| |
| return 0; |
| } |
| |
| static void cadence_timer_pre_save(void *opaque) |
| { |
| cadence_timer_sync((CadenceTimerState *)opaque); |
| } |
| |
| static int cadence_timer_post_load(void *opaque, int version_id) |
| { |
| CadenceTimerState *s = opaque; |
| |
| s->cpu_time_valid = 0; |
| cadence_timer_sync(s); |
| cadence_timer_run(s); |
| cadence_timer_update(s); |
| return 0; |
| } |
| |
| static const VMStateDescription vmstate_cadence_timer = { |
| .name = "cadence_timer", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .minimum_version_id_old = 1, |
| .pre_save = cadence_timer_pre_save, |
| .post_load = cadence_timer_post_load, |
| .fields = (VMStateField[]) { |
| VMSTATE_UINT32(reg_clock, CadenceTimerState), |
| VMSTATE_UINT32(reg_count, CadenceTimerState), |
| VMSTATE_UINT32(reg_value, CadenceTimerState), |
| VMSTATE_UINT16(reg_interval, CadenceTimerState), |
| VMSTATE_UINT16_ARRAY(reg_match, CadenceTimerState, 3), |
| VMSTATE_UINT32(reg_intr, CadenceTimerState), |
| VMSTATE_UINT32(reg_intr_en, CadenceTimerState), |
| VMSTATE_UINT32(reg_event_ctrl, CadenceTimerState), |
| VMSTATE_UINT32(reg_event, CadenceTimerState), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static const VMStateDescription vmstate_cadence_ttc = { |
| .name = "cadence_TTC", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .minimum_version_id_old = 1, |
| .fields = (VMStateField[]) { |
| VMSTATE_STRUCT_ARRAY(timer, CadenceTTCState, 3, 0, |
| vmstate_cadence_timer, |
| CadenceTimerState), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static void cadence_ttc_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| SysBusDeviceClass *sdc = SYS_BUS_DEVICE_CLASS(klass); |
| |
| sdc->init = cadence_ttc_init; |
| dc->vmsd = &vmstate_cadence_ttc; |
| } |
| |
| static const TypeInfo cadence_ttc_info = { |
| .name = TYPE_CADENCE_TTC, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(CadenceTTCState), |
| .class_init = cadence_ttc_class_init, |
| }; |
| |
| static void cadence_ttc_register_types(void) |
| { |
| type_register_static(&cadence_ttc_info); |
| } |
| |
| type_init(cadence_ttc_register_types) |