| QA output created by 051 |
| Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 |
| Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base |
| |
| === Unknown option === |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=,if=none,id=drive0 |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=,if=none,id=drive0: Block format 'qcow2' does not support the option 'unknown_opt' |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=on,if=none,id=drive0 |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=on,if=none,id=drive0: Block format 'qcow2' does not support the option 'unknown_opt' |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=1234,if=none,id=drive0 |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=1234,if=none,id=drive0: Block format 'qcow2' does not support the option 'unknown_opt' |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=foo,if=none,id=drive0 |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=foo,if=none,id=drive0: Block format 'qcow2' does not support the option 'unknown_opt' |
| |
| |
| === Unknown protocol option === |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt= |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=: Block protocol 'file' doesn't support the option 'unknown_opt' |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=on |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=on: Block protocol 'file' doesn't support the option 'unknown_opt' |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=1234 |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=1234: Block protocol 'file' doesn't support the option 'unknown_opt' |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=foo |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=foo: Block protocol 'file' doesn't support the option 'unknown_opt' |
| |
| |
| === Invalid format === |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,format=foo |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=foo: Unknown driver 'foo' |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,driver=foo |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=foo: Unknown driver 'foo' |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,driver=raw,format=qcow2 |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=raw,format=qcow2: Cannot specify both 'driver' and 'format' |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,driver=qcow2,format=qcow2 |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=qcow2,format=qcow2: Cannot specify both 'driver' and 'format' |
| |
| |
| === Node names === |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,node-name=x123456789012345678901234567890 |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) quit |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,node-name=x1234567890123456789012345678901 |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,node-name=x1234567890123456789012345678901: Node name too long |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,node-name=All-Types.of_all0wed_chars |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) quit |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,node-name=123foo |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,node-name=123foo: Invalid node name |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,node-name=_foo |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,node-name=_foo: Invalid node name |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,node-name=foo#12 |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,node-name=foo#12: Invalid node name |
| |
| |
| === Device without drive === |
| |
| Testing: -device VIRTIO_SCSI -device scsi-hd |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) QEMU_PROG: -device scsi-hd: drive property not set |
| |
| |
| === Overriding backing file === |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,driver=qcow2,backing.file.filename=TEST_DIR/t.qcow2.orig,if=none,id=drive0 -nodefaults |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) info block |
| drive0 (NODE_NAME): json:{"backing": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2.orig"}}, "driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2"}} (qcow2) |
| Removable device: not locked, tray closed |
| Cache mode: writeback |
| Backing file: TEST_DIR/t.qcow2.orig (chain depth: 1) |
| (qemu) quit |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,driver=raw,backing.file.filename=TEST_DIR/t.qcow2.orig |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=raw,backing.file.filename=TEST_DIR/t.qcow2.orig: Driver doesn't support backing files |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,file.backing.driver=file,file.backing.filename=TEST_DIR/t.qcow2.orig |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,file.backing.driver=file,file.backing.filename=TEST_DIR/t.qcow2.orig: Driver doesn't support backing files |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,file.backing.driver=qcow2,file.backing.file.filename=TEST_DIR/t.qcow2.orig |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,file.backing.driver=qcow2,file.backing.file.filename=TEST_DIR/t.qcow2.orig: Driver doesn't support backing files |
| |
| |
| === Enable and disable lazy refcounting on the command line, plus some invalid values === |
| |
| Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 |
| Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) quit |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=off |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) quit |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts= |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=: Parameter 'lazy-refcounts' expects 'on' or 'off' |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=42 |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=42: Parameter 'lazy-refcounts' expects 'on' or 'off' |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=foo |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=foo: Parameter 'lazy-refcounts' expects 'on' or 'off' |
| |
| |
| === With version 2 images enabling lazy refcounts must fail === |
| |
| Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 |
| Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on: Lazy refcounts require a qcow2 image with at least qemu 1.1 compatibility level |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=off |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) quit |
| |
| |
| === No medium === |
| |
| Testing: -drive if=floppy |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) quit |
| |
| Testing: -drive if=ide,media=cdrom |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) quit |
| |
| Testing: -drive if=ide |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) QEMU_PROG: Initialization of device ide-hd failed: Device needs media, but drive is empty |
| |
| Testing: -drive if=virtio |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) QEMU_PROG: -drive if=virtio: Device needs media, but drive is empty |
| |
| Testing: -drive if=none,id=disk -device ide-cd,drive=disk |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) quit |
| |
| Testing: -drive if=none,id=disk -device lsi53c895a -device scsi-cd,drive=disk |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) quit |
| |
| Testing: -drive if=none,id=disk -device ide-drive,drive=disk |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) QEMU_PROG: -device ide-drive,drive=disk: Device needs media, but drive is empty |
| |
| Testing: -drive if=none,id=disk -device ide-hd,drive=disk |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) QEMU_PROG: -device ide-hd,drive=disk: Device needs media, but drive is empty |
| |
| Testing: -drive if=none,id=disk -device lsi53c895a -device scsi-disk,drive=disk |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) QEMU_PROG: -device scsi-disk,drive=disk: Device needs media, but drive is empty |
| |
| Testing: -drive if=none,id=disk -device lsi53c895a -device scsi-hd,drive=disk |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) QEMU_PROG: -device scsi-hd,drive=disk: Device needs media, but drive is empty |
| |
| |
| === Read-only === |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,if=floppy,readonly=on |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) quit |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,if=ide,media=cdrom,readonly=on |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) quit |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,if=ide,readonly=on |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) QEMU_PROG: Initialization of device ide-hd failed: Block node is read-only |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,if=virtio,readonly=on |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) quit |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device ide-cd,drive=disk |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) quit |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device lsi53c895a -device scsi-cd,drive=disk |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) quit |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device ide-drive,drive=disk |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) QEMU_PROG: -device ide-drive,drive=disk: Block node is read-only |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device ide-hd,drive=disk |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) QEMU_PROG: -device ide-hd,drive=disk: Block node is read-only |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device lsi53c895a -device scsi-disk,drive=disk |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) quit |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device lsi53c895a -device scsi-hd,drive=disk |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) quit |
| |
| |
| === Cache modes === |
| |
| Testing: -drive driver=null-co,cache=none |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) quit |
| |
| Testing: -drive driver=null-co,cache=directsync |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) quit |
| |
| Testing: -drive driver=null-co,cache=writeback |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) quit |
| |
| Testing: -drive driver=null-co,cache=writethrough |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) quit |
| |
| Testing: -drive driver=null-co,cache=unsafe |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) quit |
| |
| Testing: -drive driver=null-co,cache=invalid_value |
| QEMU_PROG: -drive driver=null-co,cache=invalid_value: invalid cache option |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,cache=writeback,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0 -nodefaults |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) info block |
| drive0 (NODE_NAME): json:{"backing": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2.base"}}, "driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2"}} (qcow2) |
| Removable device: not locked, tray closed |
| Cache mode: writeback |
| Backing file: TEST_DIR/t.qcow2.base (chain depth: 1) |
| (qemu) info block file |
| |
| file: TEST_DIR/t.qcow2 (file) |
| Cache mode: writeback |
| (qemu) info block backing |
| backing: TEST_DIR/t.qcow2.base (qcow2, read-only) |
| Cache mode: writeback, ignore flushes |
| (qemu) info block backing-file |
| |
| backing-file: TEST_DIR/t.qcow2.base (file, read-only) |
| Cache mode: writeback, ignore flushes |
| (qemu) quit |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,cache=writethrough,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0 -nodefaults |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) info block |
| drive0 (NODE_NAME): json:{"backing": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2.base"}}, "driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2"}} (qcow2) |
| Removable device: not locked, tray closed |
| Cache mode: writethrough |
| Backing file: TEST_DIR/t.qcow2.base (chain depth: 1) |
| (qemu) info block file |
| |
| file: TEST_DIR/t.qcow2 (file) |
| Cache mode: writeback |
| (qemu) info block backing |
| backing: TEST_DIR/t.qcow2.base (qcow2, read-only) |
| Cache mode: writeback, ignore flushes |
| (qemu) info block backing-file |
| |
| backing-file: TEST_DIR/t.qcow2.base (file, read-only) |
| Cache mode: writeback, ignore flushes |
| (qemu) quit |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,cache=unsafe,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0 -nodefaults |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) info block |
| drive0 (NODE_NAME): json:{"backing": {"driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2.base"}}, "driver": "qcow2", "file": {"driver": "file", "filename": "TEST_DIR/t.qcow2"}} (qcow2) |
| Removable device: not locked, tray closed |
| Cache mode: writeback, ignore flushes |
| Backing file: TEST_DIR/t.qcow2.base (chain depth: 1) |
| (qemu) info block file |
| |
| file: TEST_DIR/t.qcow2 (file) |
| Cache mode: writeback, ignore flushes |
| (qemu) info block backing |
| backing: TEST_DIR/t.qcow2.base (qcow2, read-only) |
| Cache mode: writeback, ignore flushes |
| (qemu) info block backing-file |
| |
| backing-file: TEST_DIR/t.qcow2.base (file, read-only) |
| Cache mode: writeback, ignore flushes |
| (qemu) quit |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,cache=invalid_value,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0 -nodefaults |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,cache=invalid_value,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0: invalid cache option |
| |
| |
| === Specifying the protocol layer === |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,file.driver=file |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) quit |
| |
| |
| === Leaving out required options === |
| |
| Testing: -drive driver=file |
| QEMU_PROG: -drive driver=file: The 'file' block driver requires a file name |
| |
| Testing: -drive driver=file,filename= |
| QEMU_PROG: -drive driver=file,filename=: The 'file' block driver requires a file name |
| |
| Testing: -drive driver=nbd |
| QEMU_PROG: -drive driver=nbd: NBD server address missing |
| |
| Testing: -drive driver=raw |
| QEMU_PROG: -drive driver=raw: A block device must be specified for "file" |
| |
| Testing: -drive file.driver=file |
| QEMU_PROG: -drive file.driver=file: The 'file' block driver requires a file name |
| |
| Testing: -drive file.driver=nbd |
| QEMU_PROG: -drive file.driver=nbd: NBD server address missing |
| |
| Testing: -drive file.driver=raw |
| QEMU_PROG: -drive file.driver=raw: A block device must be specified for "file" |
| |
| Testing: -drive foo=bar |
| QEMU_PROG: -drive foo=bar: Must specify either driver or file |
| |
| |
| === Specifying both an option and its legacy alias === |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,iops=1234,throttling.iops-total=5678 |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops=1234,throttling.iops-total=5678: 'throttling.iops-total' and its alias 'iops' can't be used at the same time |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,iops_rd=1234,throttling.iops-read=5678 |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_rd=1234,throttling.iops-read=5678: 'throttling.iops-read' and its alias 'iops_rd' can't be used at the same time |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,iops_wr=1234,throttling.iops-write=5678 |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_wr=1234,throttling.iops-write=5678: 'throttling.iops-write' and its alias 'iops_wr' can't be used at the same time |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,bps=1234,throttling.bps-total=5678 |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps=1234,throttling.bps-total=5678: 'throttling.bps-total' and its alias 'bps' can't be used at the same time |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,bps_rd=1234,throttling.bps-read=5678 |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_rd=1234,throttling.bps-read=5678: 'throttling.bps-read' and its alias 'bps_rd' can't be used at the same time |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,bps_wr=1234,throttling.bps-write=5678 |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_wr=1234,throttling.bps-write=5678: 'throttling.bps-write' and its alias 'bps_wr' can't be used at the same time |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,iops_max=1234,throttling.iops-total-max=5678 |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_max=1234,throttling.iops-total-max=5678: 'throttling.iops-total-max' and its alias 'iops_max' can't be used at the same time |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,iops_rd_max=1234,throttling.iops-read-max=5678 |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_rd_max=1234,throttling.iops-read-max=5678: 'throttling.iops-read-max' and its alias 'iops_rd_max' can't be used at the same time |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,iops_wr_max=1234,throttling.iops-write-max=5678 |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_wr_max=1234,throttling.iops-write-max=5678: 'throttling.iops-write-max' and its alias 'iops_wr_max' can't be used at the same time |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,bps_max=1234,throttling.bps-total-max=5678 |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_max=1234,throttling.bps-total-max=5678: 'throttling.bps-total-max' and its alias 'bps_max' can't be used at the same time |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,bps_rd_max=1234,throttling.bps-read-max=5678 |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_rd_max=1234,throttling.bps-read-max=5678: 'throttling.bps-read-max' and its alias 'bps_rd_max' can't be used at the same time |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,bps_wr_max=1234,throttling.bps-write-max=5678 |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_wr_max=1234,throttling.bps-write-max=5678: 'throttling.bps-write-max' and its alias 'bps_wr_max' can't be used at the same time |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,iops_size=1234,throttling.iops-size=5678 |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_size=1234,throttling.iops-size=5678: 'throttling.iops-size' and its alias 'iops_size' can't be used at the same time |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,readonly=on,read-only=off |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,readonly=on,read-only=off: 'read-only' and its alias 'readonly' can't be used at the same time |
| |
| |
| === Catching negative/large throttling values === |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,iops=-1 |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops=-1: bps/iops/max values must be within [0, 1000000000000000] |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,bps=-2 |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps=-2: bps/iops/max values must be within [0, 1000000000000000] |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,bps_rd=-3 |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_rd=-3: bps/iops/max values must be within [0, 1000000000000000] |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,bps_rd_max=-3 |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_rd_max=-3: bps/iops/max values must be within [0, 1000000000000000] |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,throttling.iops-total=-4 |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,throttling.iops-total=-4: bps/iops/max values must be within [0, 1000000000000000] |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,throttling.bps-total=-5 |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,throttling.bps-total=-5: bps/iops/max values must be within [0, 1000000000000000] |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,bps=0 |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) quit |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,bps=1 |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) quit |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,bps=1000000000000000 |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) quit |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,bps=1000000000000001 |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps=1000000000000001: bps/iops/max values must be within [0, 1000000000000000] |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,bps=9999999999999999 |
| QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps=9999999999999999: bps/iops/max values must be within [0, 1000000000000000] |
| |
| |
| === Parsing protocol from file name === |
| |
| Testing: -hda foo:bar |
| QEMU_PROG: -hda foo:bar: Unknown protocol 'foo' |
| |
| Testing: -drive file=foo:bar |
| QEMU_PROG: -drive file=foo:bar: Unknown protocol 'foo' |
| |
| Testing: -drive file.filename=foo:bar |
| QEMU_PROG: -drive file.filename=foo:bar: Could not open 'foo:bar': No such file or directory |
| |
| Testing: -hda file:TEST_DIR/t.qcow2 |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) quit |
| |
| Testing: -drive file=file:TEST_DIR/t.qcow2 |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) quit |
| |
| Testing: -drive file.filename=file:TEST_DIR/t.qcow2 |
| QEMU_PROG: -drive file.filename=file:TEST_DIR/t.qcow2: Could not open 'file:TEST_DIR/t.qcow2': No such file or directory |
| |
| |
| === Snapshot mode === |
| |
| wrote 4096/4096 bytes at offset 0 |
| 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) |
| Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=drive0 -snapshot |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) qemu-io drive0 "write -P 0x22 0 4k" |
| wrote 4096/4096 bytes at offset 0 |
| 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) |
| (qemu) quit |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,snapshot=on,if=none,id=drive0 |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) qemu-io drive0 "write -P 0x22 0 4k" |
| wrote 4096/4096 bytes at offset 0 |
| 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) |
| (qemu) quit |
| |
| Testing: -drive file.filename=TEST_DIR/t.qcow2,driver=qcow2,snapshot=on,if=none,id=drive0 |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) qemu-io drive0 "write -P 0x22 0 4k" |
| wrote 4096/4096 bytes at offset 0 |
| 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) |
| (qemu) quit |
| |
| Testing: -drive file.filename=TEST_DIR/t.qcow2,driver=qcow2,if=none,id=drive0 -snapshot |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) qemu-io drive0 "write -P 0x22 0 4k" |
| wrote 4096/4096 bytes at offset 0 |
| 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) |
| (qemu) quit |
| |
| Testing: -drive file=file:TEST_DIR/t.qcow2,if=none,id=drive0 -snapshot |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) qemu-io drive0 "write -P 0x22 0 4k" |
| wrote 4096/4096 bytes at offset 0 |
| 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) |
| (qemu) quit |
| |
| Testing: -drive file=file:TEST_DIR/t.qcow2,snapshot=on,if=none,id=drive0 |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) qemu-io drive0 "write -P 0x22 0 4k" |
| wrote 4096/4096 bytes at offset 0 |
| 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) |
| (qemu) quit |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=drive0 -snapshot |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) qemu-io drive0 "write -P 0x22 0 4k" |
| wrote 4096/4096 bytes at offset 0 |
| 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) |
| (qemu) quit |
| |
| Testing: -drive file=TEST_DIR/t.qcow2,snapshot=on,if=none,id=drive0 |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) qemu-io drive0 "write -P 0x22 0 4k" |
| wrote 4096/4096 bytes at offset 0 |
| 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) |
| (qemu) quit |
| |
| read 4096/4096 bytes at offset 0 |
| 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) |
| Testing: -drive file=TEST_DIR/t.qcow2,snapshot=off,if=none,id=drive0 |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) qemu-io drive0 "write -P 0x22 0 4k" |
| wrote 4096/4096 bytes at offset 0 |
| 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) |
| (qemu) quit |
| |
| read 4096/4096 bytes at offset 0 |
| 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) |
| Testing: -drive file=TEST_DIR/t.qcow2,snapshot=on,if=none,id=drive0 |
| QEMU X.Y.Z monitor - type 'help' for more information |
| (qemu) qemu-io drive0 "write -P 0x33 0 4k" |
| wrote 4096/4096 bytes at offset 0 |
| 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) |
| (qemu) commit drive0 |
| (qemu) quit |
| |
| read 4096/4096 bytes at offset 0 |
| 4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) |
| Testing: -drive driver=null-co,snapshot=on |
| QEMU_PROG: -drive driver=null-co,snapshot=on: Could not get temporary filename: No such file or directory |
| |
| *** done |
