| /* |
| * Virtio PCI driver |
| * |
| * This module allows virtio devices to be used over a virtual PCI device. |
| * This can be used with QEMU based VMMs like KVM or Xen. |
| * |
| * Copyright IBM Corp. 2007 |
| * |
| * Authors: |
| * Anthony Liguori <aliguori@us.ibm.com> |
| * |
| * This header is BSD licensed so anyone can use the definitions to implement |
| * compatible drivers/servers. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. Neither the name of IBM nor the names of its contributors |
| * may be used to endorse or promote products derived from this software |
| * without specific prior written permission. |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| */ |
| |
| #ifndef _LINUX_VIRTIO_PCI_H |
| #define _LINUX_VIRTIO_PCI_H |
| |
| #include "standard-headers/linux/types.h" |
| |
| #ifndef VIRTIO_PCI_NO_LEGACY |
| |
| /* A 32-bit r/o bitmask of the features supported by the host */ |
| #define VIRTIO_PCI_HOST_FEATURES 0 |
| |
| /* A 32-bit r/w bitmask of features activated by the guest */ |
| #define VIRTIO_PCI_GUEST_FEATURES 4 |
| |
| /* A 32-bit r/w PFN for the currently selected queue */ |
| #define VIRTIO_PCI_QUEUE_PFN 8 |
| |
| /* A 16-bit r/o queue size for the currently selected queue */ |
| #define VIRTIO_PCI_QUEUE_NUM 12 |
| |
| /* A 16-bit r/w queue selector */ |
| #define VIRTIO_PCI_QUEUE_SEL 14 |
| |
| /* A 16-bit r/w queue notifier */ |
| #define VIRTIO_PCI_QUEUE_NOTIFY 16 |
| |
| /* An 8-bit device status register. */ |
| #define VIRTIO_PCI_STATUS 18 |
| |
| /* An 8-bit r/o interrupt status register. Reading the value will return the |
| * current contents of the ISR and will also clear it. This is effectively |
| * a read-and-acknowledge. */ |
| #define VIRTIO_PCI_ISR 19 |
| |
| /* MSI-X registers: only enabled if MSI-X is enabled. */ |
| /* A 16-bit vector for configuration changes. */ |
| #define VIRTIO_MSI_CONFIG_VECTOR 20 |
| /* A 16-bit vector for selected queue notifications. */ |
| #define VIRTIO_MSI_QUEUE_VECTOR 22 |
| |
| /* The remaining space is defined by each driver as the per-driver |
| * configuration space */ |
| #define VIRTIO_PCI_CONFIG_OFF(msix_enabled) ((msix_enabled) ? 24 : 20) |
| /* Deprecated: please use VIRTIO_PCI_CONFIG_OFF instead */ |
| #define VIRTIO_PCI_CONFIG(dev) VIRTIO_PCI_CONFIG_OFF((dev)->msix_enabled) |
| |
| /* Virtio ABI version, this must match exactly */ |
| #define VIRTIO_PCI_ABI_VERSION 0 |
| |
| /* How many bits to shift physical queue address written to QUEUE_PFN. |
| * 12 is historical, and due to x86 page size. */ |
| #define VIRTIO_PCI_QUEUE_ADDR_SHIFT 12 |
| |
| /* The alignment to use between consumer and producer parts of vring. |
| * x86 pagesize again. */ |
| #define VIRTIO_PCI_VRING_ALIGN 4096 |
| |
| #endif /* VIRTIO_PCI_NO_LEGACY */ |
| |
| /* The bit of the ISR which indicates a device configuration change. */ |
| #define VIRTIO_PCI_ISR_CONFIG 0x2 |
| /* Vector value used to disable MSI for queue */ |
| #define VIRTIO_MSI_NO_VECTOR 0xffff |
| |
| #ifndef VIRTIO_PCI_NO_MODERN |
| |
| /* IDs for different capabilities. Must all exist. */ |
| |
| /* Common configuration */ |
| #define VIRTIO_PCI_CAP_COMMON_CFG 1 |
| /* Notifications */ |
| #define VIRTIO_PCI_CAP_NOTIFY_CFG 2 |
| /* ISR access */ |
| #define VIRTIO_PCI_CAP_ISR_CFG 3 |
| /* Device specific configuration */ |
| #define VIRTIO_PCI_CAP_DEVICE_CFG 4 |
| /* PCI configuration access */ |
| #define VIRTIO_PCI_CAP_PCI_CFG 5 |
| /* Additional shared memory capability */ |
| #define VIRTIO_PCI_CAP_SHARED_MEMORY_CFG 8 |
| |
| /* This is the PCI capability header: */ |
| struct virtio_pci_cap { |
| uint8_t cap_vndr; /* Generic PCI field: PCI_CAP_ID_VNDR */ |
| uint8_t cap_next; /* Generic PCI field: next ptr. */ |
| uint8_t cap_len; /* Generic PCI field: capability length */ |
| uint8_t cfg_type; /* Identifies the structure. */ |
| uint8_t bar; /* Where to find it. */ |
| uint8_t id; /* Multiple capabilities of the same type */ |
| uint8_t padding[2]; /* Pad to full dword. */ |
| uint32_t offset; /* Offset within bar. */ |
| uint32_t length; /* Length of the structure, in bytes. */ |
| }; |
| |
| struct virtio_pci_cap64 { |
| struct virtio_pci_cap cap; |
| uint32_t offset_hi; /* Most sig 32 bits of offset */ |
| uint32_t length_hi; /* Most sig 32 bits of length */ |
| }; |
| |
| struct virtio_pci_notify_cap { |
| struct virtio_pci_cap cap; |
| uint32_t notify_off_multiplier; /* Multiplier for queue_notify_off. */ |
| }; |
| |
| /* Fields in VIRTIO_PCI_CAP_COMMON_CFG: */ |
| struct virtio_pci_common_cfg { |
| /* About the whole device. */ |
| uint32_t device_feature_select; /* read-write */ |
| uint32_t device_feature; /* read-only */ |
| uint32_t guest_feature_select; /* read-write */ |
| uint32_t guest_feature; /* read-write */ |
| uint16_t msix_config; /* read-write */ |
| uint16_t num_queues; /* read-only */ |
| uint8_t device_status; /* read-write */ |
| uint8_t config_generation; /* read-only */ |
| |
| /* About a specific virtqueue. */ |
| uint16_t queue_select; /* read-write */ |
| uint16_t queue_size; /* read-write, power of 2. */ |
| uint16_t queue_msix_vector; /* read-write */ |
| uint16_t queue_enable; /* read-write */ |
| uint16_t queue_notify_off; /* read-only */ |
| uint32_t queue_desc_lo; /* read-write */ |
| uint32_t queue_desc_hi; /* read-write */ |
| uint32_t queue_avail_lo; /* read-write */ |
| uint32_t queue_avail_hi; /* read-write */ |
| uint32_t queue_used_lo; /* read-write */ |
| uint32_t queue_used_hi; /* read-write */ |
| }; |
| |
| /* |
| * Warning: do not use sizeof on this: use offsetofend for |
| * specific fields you need. |
| */ |
| struct virtio_pci_modern_common_cfg { |
| struct virtio_pci_common_cfg cfg; |
| |
| uint16_t queue_notify_data; /* read-write */ |
| uint16_t queue_reset; /* read-write */ |
| |
| uint16_t admin_queue_index; /* read-only */ |
| uint16_t admin_queue_num; /* read-only */ |
| }; |
| |
| /* Fields in VIRTIO_PCI_CAP_PCI_CFG: */ |
| struct virtio_pci_cfg_cap { |
| struct virtio_pci_cap cap; |
| uint8_t pci_cfg_data[4]; /* Data for BAR access. */ |
| }; |
| |
| /* Macro versions of offsets for the Old Timers! */ |
| #define VIRTIO_PCI_CAP_VNDR 0 |
| #define VIRTIO_PCI_CAP_NEXT 1 |
| #define VIRTIO_PCI_CAP_LEN 2 |
| #define VIRTIO_PCI_CAP_CFG_TYPE 3 |
| #define VIRTIO_PCI_CAP_BAR 4 |
| #define VIRTIO_PCI_CAP_OFFSET 8 |
| #define VIRTIO_PCI_CAP_LENGTH 12 |
| |
| #define VIRTIO_PCI_NOTIFY_CAP_MULT 16 |
| |
| #define VIRTIO_PCI_COMMON_DFSELECT 0 |
| #define VIRTIO_PCI_COMMON_DF 4 |
| #define VIRTIO_PCI_COMMON_GFSELECT 8 |
| #define VIRTIO_PCI_COMMON_GF 12 |
| #define VIRTIO_PCI_COMMON_MSIX 16 |
| #define VIRTIO_PCI_COMMON_NUMQ 18 |
| #define VIRTIO_PCI_COMMON_STATUS 20 |
| #define VIRTIO_PCI_COMMON_CFGGENERATION 21 |
| #define VIRTIO_PCI_COMMON_Q_SELECT 22 |
| #define VIRTIO_PCI_COMMON_Q_SIZE 24 |
| #define VIRTIO_PCI_COMMON_Q_MSIX 26 |
| #define VIRTIO_PCI_COMMON_Q_ENABLE 28 |
| #define VIRTIO_PCI_COMMON_Q_NOFF 30 |
| #define VIRTIO_PCI_COMMON_Q_DESCLO 32 |
| #define VIRTIO_PCI_COMMON_Q_DESCHI 36 |
| #define VIRTIO_PCI_COMMON_Q_AVAILLO 40 |
| #define VIRTIO_PCI_COMMON_Q_AVAILHI 44 |
| #define VIRTIO_PCI_COMMON_Q_USEDLO 48 |
| #define VIRTIO_PCI_COMMON_Q_USEDHI 52 |
| #define VIRTIO_PCI_COMMON_Q_NDATA 56 |
| #define VIRTIO_PCI_COMMON_Q_RESET 58 |
| #define VIRTIO_PCI_COMMON_ADM_Q_IDX 60 |
| #define VIRTIO_PCI_COMMON_ADM_Q_NUM 62 |
| |
| #define LM_LOGGING_CTRL 0 |
| #define LM_BASE_ADDR_LOW 4 |
| #define LM_BASE_ADDR_HIGH 8 |
| #define LM_END_ADDR_LOW 12 |
| #define LM_END_ADDR_HIGH 16 |
| #define LM_VRING_STATE_OFFSET 0x20 |
| |
| #endif /* VIRTIO_PCI_NO_MODERN */ |
| |
| /* Admin command status. */ |
| #define VIRTIO_ADMIN_STATUS_OK 0 |
| |
| /* Admin command opcode. */ |
| #define VIRTIO_ADMIN_CMD_LIST_QUERY 0x0 |
| #define VIRTIO_ADMIN_CMD_LIST_USE 0x1 |
| |
| /* Admin command group type. */ |
| #define VIRTIO_ADMIN_GROUP_TYPE_SRIOV 0x1 |
| |
| /* Transitional device admin command. */ |
| #define VIRTIO_ADMIN_CMD_LEGACY_COMMON_CFG_WRITE 0x2 |
| #define VIRTIO_ADMIN_CMD_LEGACY_COMMON_CFG_READ 0x3 |
| #define VIRTIO_ADMIN_CMD_LEGACY_DEV_CFG_WRITE 0x4 |
| #define VIRTIO_ADMIN_CMD_LEGACY_DEV_CFG_READ 0x5 |
| #define VIRTIO_ADMIN_CMD_LEGACY_NOTIFY_INFO 0x6 |
| |
| struct QEMU_PACKED virtio_admin_cmd_hdr { |
| uint16_t opcode; |
| /* |
| * 1 - SR-IOV |
| * 2-65535 - reserved |
| */ |
| uint16_t group_type; |
| /* Unused, reserved for future extensions. */ |
| uint8_t reserved1[12]; |
| uint64_t group_member_id; |
| }; |
| |
| struct QEMU_PACKED virtio_admin_cmd_status { |
| uint16_t status; |
| uint16_t status_qualifier; |
| /* Unused, reserved for future extensions. */ |
| uint8_t reserved2[4]; |
| }; |
| |
| struct QEMU_PACKED virtio_admin_cmd_legacy_wr_data { |
| uint8_t offset; /* Starting offset of the register(s) to write. */ |
| uint8_t reserved[7]; |
| uint8_t registers[]; |
| }; |
| |
| struct QEMU_PACKED virtio_admin_cmd_legacy_rd_data { |
| uint8_t offset; /* Starting offset of the register(s) to read. */ |
| }; |
| |
| #define VIRTIO_ADMIN_CMD_NOTIFY_INFO_FLAGS_END 0 |
| #define VIRTIO_ADMIN_CMD_NOTIFY_INFO_FLAGS_OWNER_DEV 0x1 |
| #define VIRTIO_ADMIN_CMD_NOTIFY_INFO_FLAGS_OWNER_MEM 0x2 |
| |
| #define VIRTIO_ADMIN_CMD_MAX_NOTIFY_INFO 4 |
| |
| struct QEMU_PACKED virtio_admin_cmd_notify_info_data { |
| uint8_t flags; /* 0 = end of list, 1 = owner device, 2 = member device */ |
| uint8_t bar; /* BAR of the member or the owner device */ |
| uint8_t padding[6]; |
| uint64_t offset; /* Offset within bar. */ |
| }; |
| |
| struct virtio_admin_cmd_notify_info_result { |
| struct virtio_admin_cmd_notify_info_data entries[VIRTIO_ADMIN_CMD_MAX_NOTIFY_INFO]; |
| }; |
| |
| #endif |