| /* |
| * Vhost-user i2c virtio device |
| * |
| * Copyright (c) 2021 Viresh Kumar <viresh.kumar@linaro.org> |
| * |
| * SPDX-License-Identifier: GPL-2.0-or-later |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qapi/error.h" |
| #include "hw/qdev-properties.h" |
| #include "hw/virtio/virtio-bus.h" |
| #include "hw/virtio/vhost-user-i2c.h" |
| #include "qemu/error-report.h" |
| #include "standard-headers/linux/virtio_ids.h" |
| |
| static const int feature_bits[] = { |
| VIRTIO_I2C_F_ZERO_LENGTH_REQUEST, |
| VIRTIO_F_RING_RESET, |
| VHOST_INVALID_FEATURE_BIT |
| }; |
| |
| static void vu_i2c_start(VirtIODevice *vdev) |
| { |
| BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(vdev))); |
| VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus); |
| VHostUserI2C *i2c = VHOST_USER_I2C(vdev); |
| int ret, i; |
| |
| if (!k->set_guest_notifiers) { |
| error_report("binding does not support guest notifiers"); |
| return; |
| } |
| |
| ret = vhost_dev_enable_notifiers(&i2c->vhost_dev, vdev); |
| if (ret < 0) { |
| error_report("Error enabling host notifiers: %d", -ret); |
| return; |
| } |
| |
| ret = k->set_guest_notifiers(qbus->parent, i2c->vhost_dev.nvqs, true); |
| if (ret < 0) { |
| error_report("Error binding guest notifier: %d", -ret); |
| goto err_host_notifiers; |
| } |
| |
| i2c->vhost_dev.acked_features = vdev->guest_features; |
| |
| ret = vhost_dev_start(&i2c->vhost_dev, vdev, true); |
| if (ret < 0) { |
| error_report("Error starting vhost-user-i2c: %d", -ret); |
| goto err_guest_notifiers; |
| } |
| |
| /* |
| * guest_notifier_mask/pending not used yet, so just unmask |
| * everything here. virtio-pci will do the right thing by |
| * enabling/disabling irqfd. |
| */ |
| for (i = 0; i < i2c->vhost_dev.nvqs; i++) { |
| vhost_virtqueue_mask(&i2c->vhost_dev, vdev, i, false); |
| } |
| |
| return; |
| |
| err_guest_notifiers: |
| k->set_guest_notifiers(qbus->parent, i2c->vhost_dev.nvqs, false); |
| err_host_notifiers: |
| vhost_dev_disable_notifiers(&i2c->vhost_dev, vdev); |
| } |
| |
| static void vu_i2c_stop(VirtIODevice *vdev) |
| { |
| VHostUserI2C *i2c = VHOST_USER_I2C(vdev); |
| BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(vdev))); |
| VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus); |
| int ret; |
| |
| if (!k->set_guest_notifiers) { |
| return; |
| } |
| |
| vhost_dev_stop(&i2c->vhost_dev, vdev, true); |
| |
| ret = k->set_guest_notifiers(qbus->parent, i2c->vhost_dev.nvqs, false); |
| if (ret < 0) { |
| error_report("vhost guest notifier cleanup failed: %d", ret); |
| return; |
| } |
| |
| vhost_dev_disable_notifiers(&i2c->vhost_dev, vdev); |
| } |
| |
| static void vu_i2c_set_status(VirtIODevice *vdev, uint8_t status) |
| { |
| VHostUserI2C *i2c = VHOST_USER_I2C(vdev); |
| bool should_start = virtio_device_should_start(vdev, status); |
| |
| if (vhost_dev_is_started(&i2c->vhost_dev) == should_start) { |
| return; |
| } |
| |
| if (should_start) { |
| vu_i2c_start(vdev); |
| } else { |
| vu_i2c_stop(vdev); |
| } |
| } |
| |
| static uint64_t vu_i2c_get_features(VirtIODevice *vdev, |
| uint64_t requested_features, Error **errp) |
| { |
| VHostUserI2C *i2c = VHOST_USER_I2C(vdev); |
| |
| virtio_add_feature(&requested_features, VIRTIO_I2C_F_ZERO_LENGTH_REQUEST); |
| return vhost_get_features(&i2c->vhost_dev, feature_bits, requested_features); |
| } |
| |
| static void vu_i2c_handle_output(VirtIODevice *vdev, VirtQueue *vq) |
| { |
| /* |
| * Not normally called; it's the daemon that handles the queue; |
| * however virtio's cleanup path can call this. |
| */ |
| } |
| |
| static void vu_i2c_guest_notifier_mask(VirtIODevice *vdev, int idx, bool mask) |
| { |
| VHostUserI2C *i2c = VHOST_USER_I2C(vdev); |
| |
| vhost_virtqueue_mask(&i2c->vhost_dev, vdev, idx, mask); |
| } |
| |
| static bool vu_i2c_guest_notifier_pending(VirtIODevice *vdev, int idx) |
| { |
| VHostUserI2C *i2c = VHOST_USER_I2C(vdev); |
| |
| return vhost_virtqueue_pending(&i2c->vhost_dev, idx); |
| } |
| |
| static void do_vhost_user_cleanup(VirtIODevice *vdev, VHostUserI2C *i2c) |
| { |
| vhost_user_cleanup(&i2c->vhost_user); |
| virtio_delete_queue(i2c->vq); |
| virtio_cleanup(vdev); |
| } |
| |
| static int vu_i2c_connect(DeviceState *dev) |
| { |
| VirtIODevice *vdev = VIRTIO_DEVICE(dev); |
| VHostUserI2C *i2c = VHOST_USER_I2C(vdev); |
| |
| if (i2c->connected) { |
| return 0; |
| } |
| i2c->connected = true; |
| |
| /* restore vhost state */ |
| if (virtio_device_started(vdev, vdev->status)) { |
| vu_i2c_start(vdev); |
| } |
| |
| return 0; |
| } |
| |
| static void vu_i2c_disconnect(DeviceState *dev) |
| { |
| VirtIODevice *vdev = VIRTIO_DEVICE(dev); |
| VHostUserI2C *i2c = VHOST_USER_I2C(vdev); |
| |
| if (!i2c->connected) { |
| return; |
| } |
| i2c->connected = false; |
| |
| if (vhost_dev_is_started(&i2c->vhost_dev)) { |
| vu_i2c_stop(vdev); |
| } |
| } |
| |
| static void vu_i2c_event(void *opaque, QEMUChrEvent event) |
| { |
| DeviceState *dev = opaque; |
| VirtIODevice *vdev = VIRTIO_DEVICE(dev); |
| VHostUserI2C *i2c = VHOST_USER_I2C(vdev); |
| |
| switch (event) { |
| case CHR_EVENT_OPENED: |
| if (vu_i2c_connect(dev) < 0) { |
| qemu_chr_fe_disconnect(&i2c->chardev); |
| return; |
| } |
| break; |
| case CHR_EVENT_CLOSED: |
| vu_i2c_disconnect(dev); |
| break; |
| case CHR_EVENT_BREAK: |
| case CHR_EVENT_MUX_IN: |
| case CHR_EVENT_MUX_OUT: |
| /* Ignore */ |
| break; |
| } |
| } |
| |
| static void vu_i2c_device_realize(DeviceState *dev, Error **errp) |
| { |
| VirtIODevice *vdev = VIRTIO_DEVICE(dev); |
| VHostUserI2C *i2c = VHOST_USER_I2C(dev); |
| int ret; |
| |
| if (!i2c->chardev.chr) { |
| error_setg(errp, "vhost-user-i2c: missing chardev"); |
| return; |
| } |
| |
| if (!vhost_user_init(&i2c->vhost_user, &i2c->chardev, errp)) { |
| return; |
| } |
| |
| virtio_init(vdev, VIRTIO_ID_I2C_ADAPTER, 0); |
| |
| i2c->vhost_dev.nvqs = 1; |
| i2c->vq = virtio_add_queue(vdev, 4, vu_i2c_handle_output); |
| i2c->vhost_dev.vqs = g_new0(struct vhost_virtqueue, i2c->vhost_dev.nvqs); |
| |
| ret = vhost_dev_init(&i2c->vhost_dev, &i2c->vhost_user, |
| VHOST_BACKEND_TYPE_USER, 0, errp); |
| if (ret < 0) { |
| g_free(i2c->vhost_dev.vqs); |
| do_vhost_user_cleanup(vdev, i2c); |
| } |
| |
| qemu_chr_fe_set_handlers(&i2c->chardev, NULL, NULL, vu_i2c_event, NULL, |
| dev, NULL, true); |
| } |
| |
| static void vu_i2c_device_unrealize(DeviceState *dev) |
| { |
| VirtIODevice *vdev = VIRTIO_DEVICE(dev); |
| VHostUserI2C *i2c = VHOST_USER_I2C(dev); |
| struct vhost_virtqueue *vhost_vqs = i2c->vhost_dev.vqs; |
| |
| /* This will stop vhost backend if appropriate. */ |
| vu_i2c_set_status(vdev, 0); |
| vhost_dev_cleanup(&i2c->vhost_dev); |
| g_free(vhost_vqs); |
| do_vhost_user_cleanup(vdev, i2c); |
| } |
| |
| static const VMStateDescription vu_i2c_vmstate = { |
| .name = "vhost-user-i2c", |
| .unmigratable = 1, |
| }; |
| |
| static Property vu_i2c_properties[] = { |
| DEFINE_PROP_CHR("chardev", VHostUserI2C, chardev), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void vu_i2c_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| VirtioDeviceClass *vdc = VIRTIO_DEVICE_CLASS(klass); |
| |
| device_class_set_props(dc, vu_i2c_properties); |
| dc->vmsd = &vu_i2c_vmstate; |
| set_bit(DEVICE_CATEGORY_INPUT, dc->categories); |
| vdc->realize = vu_i2c_device_realize; |
| vdc->unrealize = vu_i2c_device_unrealize; |
| vdc->get_features = vu_i2c_get_features; |
| vdc->set_status = vu_i2c_set_status; |
| vdc->guest_notifier_mask = vu_i2c_guest_notifier_mask; |
| vdc->guest_notifier_pending = vu_i2c_guest_notifier_pending; |
| } |
| |
| static const TypeInfo vu_i2c_info = { |
| .name = TYPE_VHOST_USER_I2C, |
| .parent = TYPE_VIRTIO_DEVICE, |
| .instance_size = sizeof(VHostUserI2C), |
| .class_init = vu_i2c_class_init, |
| }; |
| |
| static void vu_i2c_register_types(void) |
| { |
| type_register_static(&vu_i2c_info); |
| } |
| |
| type_init(vu_i2c_register_types) |