| /* |
| * dwc-hsotg (dwc2) USB host controller emulation |
| * |
| * Based on hw/usb/hcd-ehci.c and hw/usb/hcd-ohci.c |
| * |
| * Note that to use this emulation with the dwc-otg driver in the |
| * Raspbian kernel, you must pass the option "dwc_otg.fiq_fsm_enable=0" |
| * on the kernel command line. |
| * |
| * Some useful documentation used to develop this emulation can be |
| * found online (as of April 2020) at: |
| * |
| * http://www.capital-micro.com/PDF/CME-M7_Family_User_Guide_EN.pdf |
| * which has a pretty complete description of the controller starting |
| * on page 370. |
| * |
| * https://sourceforge.net/p/wive-ng/wive-ng-mt/ci/master/tree/docs/DataSheets/RT3050_5x_V2.0_081408_0902.pdf |
| * which has a description of the controller registers starting on |
| * page 130. |
| * |
| * Copyright (c) 2020 Paul Zimmerman <pauldzim@gmail.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qemu/units.h" |
| #include "qapi/error.h" |
| #include "hw/usb/dwc2-regs.h" |
| #include "hw/usb/hcd-dwc2.h" |
| #include "migration/vmstate.h" |
| #include "trace.h" |
| #include "qemu/log.h" |
| #include "qemu/error-report.h" |
| #include "qemu/main-loop.h" |
| #include "hw/qdev-properties.h" |
| |
| #define USB_HZ_FS 12000000 |
| #define USB_HZ_HS 96000000 |
| #define USB_FRMINTVL 12000 |
| |
| /* nifty macros from Arnon's EHCI version */ |
| #define get_field(data, field) \ |
| (((data) & field##_MASK) >> field##_SHIFT) |
| |
| #define set_field(data, newval, field) do { \ |
| uint32_t val = *(data); \ |
| val &= ~field##_MASK; \ |
| val |= ((newval) << field##_SHIFT) & field##_MASK; \ |
| *(data) = val; \ |
| } while (0) |
| |
| #define get_bit(data, bitmask) \ |
| (!!((data) & (bitmask))) |
| |
| /* update irq line */ |
| static inline void dwc2_update_irq(DWC2State *s) |
| { |
| static int oldlevel; |
| int level = 0; |
| |
| if ((s->gintsts & s->gintmsk) && (s->gahbcfg & GAHBCFG_GLBL_INTR_EN)) { |
| level = 1; |
| } |
| if (level != oldlevel) { |
| oldlevel = level; |
| trace_usb_dwc2_update_irq(level); |
| qemu_set_irq(s->irq, level); |
| } |
| } |
| |
| /* flag interrupt condition */ |
| static inline void dwc2_raise_global_irq(DWC2State *s, uint32_t intr) |
| { |
| if (!(s->gintsts & intr)) { |
| s->gintsts |= intr; |
| trace_usb_dwc2_raise_global_irq(intr); |
| dwc2_update_irq(s); |
| } |
| } |
| |
| static inline void dwc2_lower_global_irq(DWC2State *s, uint32_t intr) |
| { |
| if (s->gintsts & intr) { |
| s->gintsts &= ~intr; |
| trace_usb_dwc2_lower_global_irq(intr); |
| dwc2_update_irq(s); |
| } |
| } |
| |
| static inline void dwc2_raise_host_irq(DWC2State *s, uint32_t host_intr) |
| { |
| if (!(s->haint & host_intr)) { |
| s->haint |= host_intr; |
| s->haint &= 0xffff; |
| trace_usb_dwc2_raise_host_irq(host_intr); |
| if (s->haint & s->haintmsk) { |
| dwc2_raise_global_irq(s, GINTSTS_HCHINT); |
| } |
| } |
| } |
| |
| static inline void dwc2_lower_host_irq(DWC2State *s, uint32_t host_intr) |
| { |
| if (s->haint & host_intr) { |
| s->haint &= ~host_intr; |
| trace_usb_dwc2_lower_host_irq(host_intr); |
| if (!(s->haint & s->haintmsk)) { |
| dwc2_lower_global_irq(s, GINTSTS_HCHINT); |
| } |
| } |
| } |
| |
| static inline void dwc2_update_hc_irq(DWC2State *s, int index) |
| { |
| uint32_t host_intr = 1 << (index >> 3); |
| |
| if (s->hreg1[index + 2] & s->hreg1[index + 3]) { |
| dwc2_raise_host_irq(s, host_intr); |
| } else { |
| dwc2_lower_host_irq(s, host_intr); |
| } |
| } |
| |
| /* set a timer for EOF */ |
| static void dwc2_eof_timer(DWC2State *s) |
| { |
| timer_mod(s->eof_timer, s->sof_time + s->usb_frame_time); |
| } |
| |
| /* Set a timer for EOF and generate SOF event */ |
| static void dwc2_sof(DWC2State *s) |
| { |
| s->sof_time += s->usb_frame_time; |
| trace_usb_dwc2_sof(s->sof_time); |
| dwc2_eof_timer(s); |
| dwc2_raise_global_irq(s, GINTSTS_SOF); |
| } |
| |
| /* Do frame processing on frame boundary */ |
| static void dwc2_frame_boundary(void *opaque) |
| { |
| DWC2State *s = opaque; |
| int64_t now; |
| uint16_t frcnt; |
| |
| now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); |
| |
| /* Frame boundary, so do EOF stuff here */ |
| |
| /* Increment frame number */ |
| frcnt = (uint16_t)((now - s->sof_time) / s->fi); |
| s->frame_number = (s->frame_number + frcnt) & 0xffff; |
| s->hfnum = s->frame_number & HFNUM_MAX_FRNUM; |
| |
| /* Do SOF stuff here */ |
| dwc2_sof(s); |
| } |
| |
| /* Start sending SOF tokens on the USB bus */ |
| static void dwc2_bus_start(DWC2State *s) |
| { |
| trace_usb_dwc2_bus_start(); |
| s->sof_time = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); |
| dwc2_eof_timer(s); |
| } |
| |
| /* Stop sending SOF tokens on the USB bus */ |
| static void dwc2_bus_stop(DWC2State *s) |
| { |
| trace_usb_dwc2_bus_stop(); |
| timer_del(s->eof_timer); |
| } |
| |
| static USBDevice *dwc2_find_device(DWC2State *s, uint8_t addr) |
| { |
| USBDevice *dev; |
| |
| trace_usb_dwc2_find_device(addr); |
| |
| if (!(s->hprt0 & HPRT0_ENA)) { |
| trace_usb_dwc2_port_disabled(0); |
| } else { |
| dev = usb_find_device(&s->uport, addr); |
| if (dev != NULL) { |
| trace_usb_dwc2_device_found(0); |
| return dev; |
| } |
| } |
| |
| trace_usb_dwc2_device_not_found(); |
| return NULL; |
| } |
| |
| static const char *pstatus[] = { |
| "USB_RET_SUCCESS", "USB_RET_NODEV", "USB_RET_NAK", "USB_RET_STALL", |
| "USB_RET_BABBLE", "USB_RET_IOERROR", "USB_RET_ASYNC", |
| "USB_RET_ADD_TO_QUEUE", "USB_RET_REMOVE_FROM_QUEUE" |
| }; |
| |
| static uint32_t pintr[] = { |
| HCINTMSK_XFERCOMPL, HCINTMSK_XACTERR, HCINTMSK_NAK, HCINTMSK_STALL, |
| HCINTMSK_BBLERR, HCINTMSK_XACTERR, HCINTMSK_XACTERR, HCINTMSK_XACTERR, |
| HCINTMSK_XACTERR |
| }; |
| |
| static const char *types[] = { |
| "Ctrl", "Isoc", "Bulk", "Intr" |
| }; |
| |
| static const char *dirs[] = { |
| "Out", "In" |
| }; |
| |
| static void dwc2_handle_packet(DWC2State *s, uint32_t devadr, USBDevice *dev, |
| USBEndpoint *ep, uint32_t index, bool send) |
| { |
| DWC2Packet *p; |
| uint32_t hcchar = s->hreg1[index]; |
| uint32_t hctsiz = s->hreg1[index + 4]; |
| uint32_t hcdma = s->hreg1[index + 5]; |
| uint32_t chan, epnum, epdir, eptype, mps, pid, pcnt, len, tlen, intr = 0; |
| uint32_t tpcnt, stsidx, actual = 0; |
| bool do_intr = false, done = false; |
| |
| epnum = get_field(hcchar, HCCHAR_EPNUM); |
| epdir = get_bit(hcchar, HCCHAR_EPDIR); |
| eptype = get_field(hcchar, HCCHAR_EPTYPE); |
| mps = get_field(hcchar, HCCHAR_MPS); |
| pid = get_field(hctsiz, TSIZ_SC_MC_PID); |
| pcnt = get_field(hctsiz, TSIZ_PKTCNT); |
| len = get_field(hctsiz, TSIZ_XFERSIZE); |
| assert(len <= DWC2_MAX_XFER_SIZE); |
| chan = index >> 3; |
| p = &s->packet[chan]; |
| |
| trace_usb_dwc2_handle_packet(chan, dev, &p->packet, epnum, types[eptype], |
| dirs[epdir], mps, len, pcnt); |
| |
| if (eptype == USB_ENDPOINT_XFER_CONTROL && pid == TSIZ_SC_MC_PID_SETUP) { |
| pid = USB_TOKEN_SETUP; |
| } else { |
| pid = epdir ? USB_TOKEN_IN : USB_TOKEN_OUT; |
| } |
| |
| if (send) { |
| tlen = len; |
| if (p->small) { |
| if (tlen > mps) { |
| tlen = mps; |
| } |
| } |
| |
| if (pid != USB_TOKEN_IN) { |
| trace_usb_dwc2_memory_read(hcdma, tlen); |
| if (dma_memory_read(&s->dma_as, hcdma, |
| s->usb_buf[chan], tlen) != MEMTX_OK) { |
| qemu_log_mask(LOG_GUEST_ERROR, "%s: dma_memory_read failed\n", |
| __func__); |
| } |
| } |
| |
| usb_packet_init(&p->packet); |
| usb_packet_setup(&p->packet, pid, ep, 0, hcdma, |
| pid != USB_TOKEN_IN, true); |
| usb_packet_addbuf(&p->packet, s->usb_buf[chan], tlen); |
| p->async = DWC2_ASYNC_NONE; |
| usb_handle_packet(dev, &p->packet); |
| } else { |
| tlen = p->len; |
| } |
| |
| stsidx = -p->packet.status; |
| assert(stsidx < sizeof(pstatus) / sizeof(*pstatus)); |
| actual = p->packet.actual_length; |
| trace_usb_dwc2_packet_status(pstatus[stsidx], actual); |
| |
| babble: |
| if (p->packet.status != USB_RET_SUCCESS && |
| p->packet.status != USB_RET_NAK && |
| p->packet.status != USB_RET_STALL && |
| p->packet.status != USB_RET_ASYNC) { |
| trace_usb_dwc2_packet_error(pstatus[stsidx]); |
| } |
| |
| if (p->packet.status == USB_RET_ASYNC) { |
| trace_usb_dwc2_async_packet(&p->packet, chan, dev, epnum, |
| dirs[epdir], tlen); |
| usb_device_flush_ep_queue(dev, ep); |
| assert(p->async != DWC2_ASYNC_INFLIGHT); |
| p->devadr = devadr; |
| p->epnum = epnum; |
| p->epdir = epdir; |
| p->mps = mps; |
| p->pid = pid; |
| p->index = index; |
| p->pcnt = pcnt; |
| p->len = tlen; |
| p->async = DWC2_ASYNC_INFLIGHT; |
| p->needs_service = false; |
| return; |
| } |
| |
| if (p->packet.status == USB_RET_SUCCESS) { |
| if (actual > tlen) { |
| p->packet.status = USB_RET_BABBLE; |
| goto babble; |
| } |
| |
| if (pid == USB_TOKEN_IN) { |
| trace_usb_dwc2_memory_write(hcdma, actual); |
| if (dma_memory_write(&s->dma_as, hcdma, s->usb_buf[chan], |
| actual) != MEMTX_OK) { |
| qemu_log_mask(LOG_GUEST_ERROR, "%s: dma_memory_write failed\n", |
| __func__); |
| } |
| } |
| |
| tpcnt = actual / mps; |
| if (actual % mps) { |
| tpcnt++; |
| if (pid == USB_TOKEN_IN) { |
| done = true; |
| } |
| } |
| |
| pcnt -= tpcnt < pcnt ? tpcnt : pcnt; |
| set_field(&hctsiz, pcnt, TSIZ_PKTCNT); |
| len -= actual < len ? actual : len; |
| set_field(&hctsiz, len, TSIZ_XFERSIZE); |
| s->hreg1[index + 4] = hctsiz; |
| hcdma += actual; |
| s->hreg1[index + 5] = hcdma; |
| |
| if (!pcnt || len == 0 || actual == 0) { |
| done = true; |
| } |
| } else { |
| intr |= pintr[stsidx]; |
| if (p->packet.status == USB_RET_NAK && |
| (eptype == USB_ENDPOINT_XFER_CONTROL || |
| eptype == USB_ENDPOINT_XFER_BULK)) { |
| /* |
| * for ctrl/bulk, automatically retry on NAK, |
| * but send the interrupt anyway |
| */ |
| intr &= ~HCINTMSK_RESERVED14_31; |
| s->hreg1[index + 2] |= intr; |
| do_intr = true; |
| } else { |
| intr |= HCINTMSK_CHHLTD; |
| done = true; |
| } |
| } |
| |
| usb_packet_cleanup(&p->packet); |
| |
| if (done) { |
| hcchar &= ~HCCHAR_CHENA; |
| s->hreg1[index] = hcchar; |
| if (!(intr & HCINTMSK_CHHLTD)) { |
| intr |= HCINTMSK_CHHLTD | HCINTMSK_XFERCOMPL; |
| } |
| intr &= ~HCINTMSK_RESERVED14_31; |
| s->hreg1[index + 2] |= intr; |
| p->needs_service = false; |
| trace_usb_dwc2_packet_done(pstatus[stsidx], actual, len, pcnt); |
| dwc2_update_hc_irq(s, index); |
| return; |
| } |
| |
| p->devadr = devadr; |
| p->epnum = epnum; |
| p->epdir = epdir; |
| p->mps = mps; |
| p->pid = pid; |
| p->index = index; |
| p->pcnt = pcnt; |
| p->len = len; |
| p->needs_service = true; |
| trace_usb_dwc2_packet_next(pstatus[stsidx], len, pcnt); |
| if (do_intr) { |
| dwc2_update_hc_irq(s, index); |
| } |
| } |
| |
| /* Attach or detach a device on root hub */ |
| |
| static const char *speeds[] = { |
| "low", "full", "high" |
| }; |
| |
| static void dwc2_attach(USBPort *port) |
| { |
| DWC2State *s = port->opaque; |
| int hispd = 0; |
| |
| trace_usb_dwc2_attach(port); |
| assert(port->index == 0); |
| |
| if (!port->dev || !port->dev->attached) { |
| return; |
| } |
| |
| assert(port->dev->speed <= USB_SPEED_HIGH); |
| trace_usb_dwc2_attach_speed(speeds[port->dev->speed]); |
| s->hprt0 &= ~HPRT0_SPD_MASK; |
| |
| switch (port->dev->speed) { |
| case USB_SPEED_LOW: |
| s->hprt0 |= HPRT0_SPD_LOW_SPEED << HPRT0_SPD_SHIFT; |
| break; |
| case USB_SPEED_FULL: |
| s->hprt0 |= HPRT0_SPD_FULL_SPEED << HPRT0_SPD_SHIFT; |
| break; |
| case USB_SPEED_HIGH: |
| s->hprt0 |= HPRT0_SPD_HIGH_SPEED << HPRT0_SPD_SHIFT; |
| hispd = 1; |
| break; |
| } |
| |
| if (hispd) { |
| s->usb_frame_time = NANOSECONDS_PER_SECOND / 8000; /* 125000 */ |
| if (NANOSECONDS_PER_SECOND >= USB_HZ_HS) { |
| s->usb_bit_time = NANOSECONDS_PER_SECOND / USB_HZ_HS; /* 10.4 */ |
| } else { |
| s->usb_bit_time = 1; |
| } |
| } else { |
| s->usb_frame_time = NANOSECONDS_PER_SECOND / 1000; /* 1000000 */ |
| if (NANOSECONDS_PER_SECOND >= USB_HZ_FS) { |
| s->usb_bit_time = NANOSECONDS_PER_SECOND / USB_HZ_FS; /* 83.3 */ |
| } else { |
| s->usb_bit_time = 1; |
| } |
| } |
| |
| s->fi = USB_FRMINTVL - 1; |
| s->hprt0 |= HPRT0_CONNDET | HPRT0_CONNSTS; |
| |
| dwc2_bus_start(s); |
| dwc2_raise_global_irq(s, GINTSTS_PRTINT); |
| } |
| |
| static void dwc2_detach(USBPort *port) |
| { |
| DWC2State *s = port->opaque; |
| |
| trace_usb_dwc2_detach(port); |
| assert(port->index == 0); |
| |
| dwc2_bus_stop(s); |
| |
| s->hprt0 &= ~(HPRT0_SPD_MASK | HPRT0_SUSP | HPRT0_ENA | HPRT0_CONNSTS); |
| s->hprt0 |= HPRT0_CONNDET | HPRT0_ENACHG; |
| |
| dwc2_raise_global_irq(s, GINTSTS_PRTINT); |
| } |
| |
| static void dwc2_child_detach(USBPort *port, USBDevice *child) |
| { |
| trace_usb_dwc2_child_detach(port, child); |
| assert(port->index == 0); |
| } |
| |
| static void dwc2_wakeup(USBPort *port) |
| { |
| DWC2State *s = port->opaque; |
| |
| trace_usb_dwc2_wakeup(port); |
| assert(port->index == 0); |
| |
| if (s->hprt0 & HPRT0_SUSP) { |
| s->hprt0 |= HPRT0_RES; |
| dwc2_raise_global_irq(s, GINTSTS_PRTINT); |
| } |
| |
| qemu_bh_schedule(s->async_bh); |
| } |
| |
| static void dwc2_async_packet_complete(USBPort *port, USBPacket *packet) |
| { |
| DWC2State *s = port->opaque; |
| DWC2Packet *p; |
| USBDevice *dev; |
| USBEndpoint *ep; |
| |
| assert(port->index == 0); |
| p = container_of(packet, DWC2Packet, packet); |
| dev = dwc2_find_device(s, p->devadr); |
| ep = usb_ep_get(dev, p->pid, p->epnum); |
| trace_usb_dwc2_async_packet_complete(port, packet, p->index >> 3, dev, |
| p->epnum, dirs[p->epdir], p->len); |
| assert(p->async == DWC2_ASYNC_INFLIGHT); |
| |
| if (packet->status == USB_RET_REMOVE_FROM_QUEUE) { |
| usb_cancel_packet(packet); |
| usb_packet_cleanup(packet); |
| return; |
| } |
| |
| dwc2_handle_packet(s, p->devadr, dev, ep, p->index, false); |
| |
| p->async = DWC2_ASYNC_FINISHED; |
| qemu_bh_schedule(s->async_bh); |
| } |
| |
| static USBPortOps dwc2_port_ops = { |
| .attach = dwc2_attach, |
| .detach = dwc2_detach, |
| .child_detach = dwc2_child_detach, |
| .wakeup = dwc2_wakeup, |
| .complete = dwc2_async_packet_complete, |
| }; |
| |
| static uint32_t dwc2_get_frame_remaining(DWC2State *s) |
| { |
| uint32_t fr = 0; |
| int64_t tks; |
| |
| tks = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) - s->sof_time; |
| if (tks < 0) { |
| tks = 0; |
| } |
| |
| /* avoid muldiv if possible */ |
| if (tks >= s->usb_frame_time) { |
| goto out; |
| } |
| if (tks < s->usb_bit_time) { |
| fr = s->fi; |
| goto out; |
| } |
| |
| /* tks = number of ns since SOF, divided by 83 (fs) or 10 (hs) */ |
| tks = tks / s->usb_bit_time; |
| if (tks >= (int64_t)s->fi) { |
| goto out; |
| } |
| |
| /* remaining = frame interval minus tks */ |
| fr = (uint32_t)((int64_t)s->fi - tks); |
| |
| out: |
| return fr; |
| } |
| |
| static void dwc2_work_bh(void *opaque) |
| { |
| DWC2State *s = opaque; |
| DWC2Packet *p; |
| USBDevice *dev; |
| USBEndpoint *ep; |
| int64_t t_now, expire_time; |
| int chan; |
| bool found = false; |
| |
| trace_usb_dwc2_work_bh(); |
| if (s->working) { |
| return; |
| } |
| s->working = true; |
| |
| t_now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); |
| chan = s->next_chan; |
| |
| do { |
| p = &s->packet[chan]; |
| if (p->needs_service) { |
| dev = dwc2_find_device(s, p->devadr); |
| ep = usb_ep_get(dev, p->pid, p->epnum); |
| trace_usb_dwc2_work_bh_service(s->next_chan, chan, dev, p->epnum); |
| dwc2_handle_packet(s, p->devadr, dev, ep, p->index, true); |
| found = true; |
| } |
| if (++chan == DWC2_NB_CHAN) { |
| chan = 0; |
| } |
| if (found) { |
| s->next_chan = chan; |
| trace_usb_dwc2_work_bh_next(chan); |
| } |
| } while (chan != s->next_chan); |
| |
| if (found) { |
| expire_time = t_now + NANOSECONDS_PER_SECOND / 4000; |
| timer_mod(s->frame_timer, expire_time); |
| } |
| s->working = false; |
| } |
| |
| static void dwc2_enable_chan(DWC2State *s, uint32_t index) |
| { |
| USBDevice *dev; |
| USBEndpoint *ep; |
| uint32_t hcchar; |
| uint32_t hctsiz; |
| uint32_t devadr, epnum, epdir, eptype, pid, len; |
| DWC2Packet *p; |
| |
| assert((index >> 3) < DWC2_NB_CHAN); |
| p = &s->packet[index >> 3]; |
| hcchar = s->hreg1[index]; |
| hctsiz = s->hreg1[index + 4]; |
| devadr = get_field(hcchar, HCCHAR_DEVADDR); |
| epnum = get_field(hcchar, HCCHAR_EPNUM); |
| epdir = get_bit(hcchar, HCCHAR_EPDIR); |
| eptype = get_field(hcchar, HCCHAR_EPTYPE); |
| pid = get_field(hctsiz, TSIZ_SC_MC_PID); |
| len = get_field(hctsiz, TSIZ_XFERSIZE); |
| |
| dev = dwc2_find_device(s, devadr); |
| |
| trace_usb_dwc2_enable_chan(index >> 3, dev, &p->packet, epnum); |
| if (dev == NULL) { |
| return; |
| } |
| |
| if (eptype == USB_ENDPOINT_XFER_CONTROL && pid == TSIZ_SC_MC_PID_SETUP) { |
| pid = USB_TOKEN_SETUP; |
| } else { |
| pid = epdir ? USB_TOKEN_IN : USB_TOKEN_OUT; |
| } |
| |
| ep = usb_ep_get(dev, pid, epnum); |
| |
| /* |
| * Hack: Networking doesn't like us delivering large transfers, it kind |
| * of works but the latency is horrible. So if the transfer is <= the mtu |
| * size, we take that as a hint that this might be a network transfer, |
| * and do the transfer packet-by-packet. |
| */ |
| if (len > 1536) { |
| p->small = false; |
| } else { |
| p->small = true; |
| } |
| |
| dwc2_handle_packet(s, devadr, dev, ep, index, true); |
| qemu_bh_schedule(s->async_bh); |
| } |
| |
| static const char *glbregnm[] = { |
| "GOTGCTL ", "GOTGINT ", "GAHBCFG ", "GUSBCFG ", "GRSTCTL ", |
| "GINTSTS ", "GINTMSK ", "GRXSTSR ", "GRXSTSP ", "GRXFSIZ ", |
| "GNPTXFSIZ", "GNPTXSTS ", "GI2CCTL ", "GPVNDCTL ", "GGPIO ", |
| "GUID ", "GSNPSID ", "GHWCFG1 ", "GHWCFG2 ", "GHWCFG3 ", |
| "GHWCFG4 ", "GLPMCFG ", "GPWRDN ", "GDFIFOCFG", "GADPCTL ", |
| "GREFCLK ", "GINTMSK2 ", "GINTSTS2 " |
| }; |
| |
| static uint64_t dwc2_glbreg_read(void *ptr, hwaddr addr, int index, |
| unsigned size) |
| { |
| DWC2State *s = ptr; |
| uint32_t val; |
| |
| assert(addr <= GINTSTS2); |
| val = s->glbreg[index]; |
| |
| switch (addr) { |
| case GRSTCTL: |
| /* clear any self-clearing bits that were set */ |
| val &= ~(GRSTCTL_TXFFLSH | GRSTCTL_RXFFLSH | GRSTCTL_IN_TKNQ_FLSH | |
| GRSTCTL_FRMCNTRRST | GRSTCTL_HSFTRST | GRSTCTL_CSFTRST); |
| s->glbreg[index] = val; |
| break; |
| default: |
| break; |
| } |
| |
| trace_usb_dwc2_glbreg_read(addr, glbregnm[index], val); |
| return val; |
| } |
| |
| static void dwc2_glbreg_write(void *ptr, hwaddr addr, int index, uint64_t val, |
| unsigned size) |
| { |
| DWC2State *s = ptr; |
| uint64_t orig = val; |
| uint32_t *mmio; |
| uint32_t old; |
| int iflg = 0; |
| |
| assert(addr <= GINTSTS2); |
| mmio = &s->glbreg[index]; |
| old = *mmio; |
| |
| switch (addr) { |
| case GOTGCTL: |
| /* don't allow setting of read-only bits */ |
| val &= ~(GOTGCTL_MULT_VALID_BC_MASK | GOTGCTL_BSESVLD | |
| GOTGCTL_ASESVLD | GOTGCTL_DBNC_SHORT | GOTGCTL_CONID_B | |
| GOTGCTL_HSTNEGSCS | GOTGCTL_SESREQSCS); |
| /* don't allow clearing of read-only bits */ |
| val |= old & (GOTGCTL_MULT_VALID_BC_MASK | GOTGCTL_BSESVLD | |
| GOTGCTL_ASESVLD | GOTGCTL_DBNC_SHORT | GOTGCTL_CONID_B | |
| GOTGCTL_HSTNEGSCS | GOTGCTL_SESREQSCS); |
| break; |
| case GAHBCFG: |
| if ((val & GAHBCFG_GLBL_INTR_EN) && !(old & GAHBCFG_GLBL_INTR_EN)) { |
| iflg = 1; |
| } |
| break; |
| case GRSTCTL: |
| val |= GRSTCTL_AHBIDLE; |
| val &= ~GRSTCTL_DMAREQ; |
| if (!(old & GRSTCTL_TXFFLSH) && (val & GRSTCTL_TXFFLSH)) { |
| /* TODO - TX fifo flush */ |
| qemu_log_mask(LOG_UNIMP, "Tx FIFO flush not implemented\n"); |
| } |
| if (!(old & GRSTCTL_RXFFLSH) && (val & GRSTCTL_RXFFLSH)) { |
| /* TODO - RX fifo flush */ |
| qemu_log_mask(LOG_UNIMP, "Rx FIFO flush not implemented\n"); |
| } |
| if (!(old & GRSTCTL_IN_TKNQ_FLSH) && (val & GRSTCTL_IN_TKNQ_FLSH)) { |
| /* TODO - device IN token queue flush */ |
| qemu_log_mask(LOG_UNIMP, "Token queue flush not implemented\n"); |
| } |
| if (!(old & GRSTCTL_FRMCNTRRST) && (val & GRSTCTL_FRMCNTRRST)) { |
| /* TODO - host frame counter reset */ |
| qemu_log_mask(LOG_UNIMP, "Frame counter reset not implemented\n"); |
| } |
| if (!(old & GRSTCTL_HSFTRST) && (val & GRSTCTL_HSFTRST)) { |
| /* TODO - host soft reset */ |
| qemu_log_mask(LOG_UNIMP, "Host soft reset not implemented\n"); |
| } |
| if (!(old & GRSTCTL_CSFTRST) && (val & GRSTCTL_CSFTRST)) { |
| /* TODO - core soft reset */ |
| qemu_log_mask(LOG_UNIMP, "Core soft reset not implemented\n"); |
| } |
| /* don't allow clearing of self-clearing bits */ |
| val |= old & (GRSTCTL_TXFFLSH | GRSTCTL_RXFFLSH | |
| GRSTCTL_IN_TKNQ_FLSH | GRSTCTL_FRMCNTRRST | |
| GRSTCTL_HSFTRST | GRSTCTL_CSFTRST); |
| break; |
| case GINTSTS: |
| /* clear the write-1-to-clear bits */ |
| val |= ~old; |
| val = ~val; |
| /* don't allow clearing of read-only bits */ |
| val |= old & (GINTSTS_PTXFEMP | GINTSTS_HCHINT | GINTSTS_PRTINT | |
| GINTSTS_OEPINT | GINTSTS_IEPINT | GINTSTS_GOUTNAKEFF | |
| GINTSTS_GINNAKEFF | GINTSTS_NPTXFEMP | GINTSTS_RXFLVL | |
| GINTSTS_OTGINT | GINTSTS_CURMODE_HOST); |
| iflg = 1; |
| break; |
| case GINTMSK: |
| iflg = 1; |
| break; |
| default: |
| break; |
| } |
| |
| trace_usb_dwc2_glbreg_write(addr, glbregnm[index], orig, old, val); |
| *mmio = val; |
| |
| if (iflg) { |
| dwc2_update_irq(s); |
| } |
| } |
| |
| static uint64_t dwc2_fszreg_read(void *ptr, hwaddr addr, int index, |
| unsigned size) |
| { |
| DWC2State *s = ptr; |
| uint32_t val; |
| |
| assert(addr == HPTXFSIZ); |
| val = s->fszreg[index]; |
| |
| trace_usb_dwc2_fszreg_read(addr, val); |
| return val; |
| } |
| |
| static void dwc2_fszreg_write(void *ptr, hwaddr addr, int index, uint64_t val, |
| unsigned size) |
| { |
| DWC2State *s = ptr; |
| uint64_t orig = val; |
| uint32_t *mmio; |
| uint32_t old; |
| |
| assert(addr == HPTXFSIZ); |
| mmio = &s->fszreg[index]; |
| old = *mmio; |
| |
| trace_usb_dwc2_fszreg_write(addr, orig, old, val); |
| *mmio = val; |
| } |
| |
| static const char *hreg0nm[] = { |
| "HCFG ", "HFIR ", "HFNUM ", "<rsvd> ", "HPTXSTS ", |
| "HAINT ", "HAINTMSK ", "HFLBADDR ", "<rsvd> ", "<rsvd> ", |
| "<rsvd> ", "<rsvd> ", "<rsvd> ", "<rsvd> ", "<rsvd> ", |
| "<rsvd> ", "HPRT0 " |
| }; |
| |
| static uint64_t dwc2_hreg0_read(void *ptr, hwaddr addr, int index, |
| unsigned size) |
| { |
| DWC2State *s = ptr; |
| uint32_t val; |
| |
| assert(addr >= HCFG && addr <= HPRT0); |
| val = s->hreg0[index]; |
| |
| switch (addr) { |
| case HFNUM: |
| val = (dwc2_get_frame_remaining(s) << HFNUM_FRREM_SHIFT) | |
| (s->hfnum << HFNUM_FRNUM_SHIFT); |
| break; |
| default: |
| break; |
| } |
| |
| trace_usb_dwc2_hreg0_read(addr, hreg0nm[index], val); |
| return val; |
| } |
| |
| static void dwc2_hreg0_write(void *ptr, hwaddr addr, int index, uint64_t val, |
| unsigned size) |
| { |
| DWC2State *s = ptr; |
| USBDevice *dev = s->uport.dev; |
| uint64_t orig = val; |
| uint32_t *mmio; |
| uint32_t tval, told, old; |
| int prst = 0; |
| int iflg = 0; |
| |
| assert(addr >= HCFG && addr <= HPRT0); |
| mmio = &s->hreg0[index]; |
| old = *mmio; |
| |
| switch (addr) { |
| case HFIR: |
| break; |
| case HFNUM: |
| case HPTXSTS: |
| case HAINT: |
| qemu_log_mask(LOG_GUEST_ERROR, "%s: write to read-only register\n", |
| __func__); |
| return; |
| case HAINTMSK: |
| val &= 0xffff; |
| break; |
| case HPRT0: |
| /* don't allow clearing of read-only bits */ |
| val |= old & (HPRT0_SPD_MASK | HPRT0_LNSTS_MASK | HPRT0_OVRCURRACT | |
| HPRT0_CONNSTS); |
| /* don't allow clearing of self-clearing bits */ |
| val |= old & (HPRT0_SUSP | HPRT0_RES); |
| /* don't allow setting of self-setting bits */ |
| if (!(old & HPRT0_ENA) && (val & HPRT0_ENA)) { |
| val &= ~HPRT0_ENA; |
| } |
| /* clear the write-1-to-clear bits */ |
| tval = val & (HPRT0_OVRCURRCHG | HPRT0_ENACHG | HPRT0_ENA | |
| HPRT0_CONNDET); |
| told = old & (HPRT0_OVRCURRCHG | HPRT0_ENACHG | HPRT0_ENA | |
| HPRT0_CONNDET); |
| tval |= ~told; |
| tval = ~tval; |
| tval &= (HPRT0_OVRCURRCHG | HPRT0_ENACHG | HPRT0_ENA | |
| HPRT0_CONNDET); |
| val &= ~(HPRT0_OVRCURRCHG | HPRT0_ENACHG | HPRT0_ENA | |
| HPRT0_CONNDET); |
| val |= tval; |
| if (!(val & HPRT0_RST) && (old & HPRT0_RST)) { |
| if (dev && dev->attached) { |
| val |= HPRT0_ENA | HPRT0_ENACHG; |
| prst = 1; |
| } |
| } |
| if (val & (HPRT0_OVRCURRCHG | HPRT0_ENACHG | HPRT0_CONNDET)) { |
| iflg = 1; |
| } else { |
| iflg = -1; |
| } |
| break; |
| default: |
| break; |
| } |
| |
| if (prst) { |
| trace_usb_dwc2_hreg0_write(addr, hreg0nm[index], orig, old, |
| val & ~HPRT0_CONNDET); |
| trace_usb_dwc2_hreg0_action("call usb_port_reset"); |
| usb_port_reset(&s->uport); |
| val &= ~HPRT0_CONNDET; |
| } else { |
| trace_usb_dwc2_hreg0_write(addr, hreg0nm[index], orig, old, val); |
| } |
| |
| *mmio = val; |
| |
| if (iflg > 0) { |
| trace_usb_dwc2_hreg0_action("enable PRTINT"); |
| dwc2_raise_global_irq(s, GINTSTS_PRTINT); |
| } else if (iflg < 0) { |
| trace_usb_dwc2_hreg0_action("disable PRTINT"); |
| dwc2_lower_global_irq(s, GINTSTS_PRTINT); |
| } |
| } |
| |
| static const char *hreg1nm[] = { |
| "HCCHAR ", "HCSPLT ", "HCINT ", "HCINTMSK", "HCTSIZ ", "HCDMA ", |
| "<rsvd> ", "HCDMAB " |
| }; |
| |
| static uint64_t dwc2_hreg1_read(void *ptr, hwaddr addr, int index, |
| unsigned size) |
| { |
| DWC2State *s = ptr; |
| uint32_t val; |
| |
| assert(addr >= HCCHAR(0) && addr <= HCDMAB(DWC2_NB_CHAN - 1)); |
| val = s->hreg1[index]; |
| |
| trace_usb_dwc2_hreg1_read(addr, hreg1nm[index & 7], addr >> 5, val); |
| return val; |
| } |
| |
| static void dwc2_hreg1_write(void *ptr, hwaddr addr, int index, uint64_t val, |
| unsigned size) |
| { |
| DWC2State *s = ptr; |
| uint64_t orig = val; |
| uint32_t *mmio; |
| uint32_t old; |
| int iflg = 0; |
| int enflg = 0; |
| int disflg = 0; |
| |
| assert(addr >= HCCHAR(0) && addr <= HCDMAB(DWC2_NB_CHAN - 1)); |
| mmio = &s->hreg1[index]; |
| old = *mmio; |
| |
| switch (HSOTG_REG(0x500) + (addr & 0x1c)) { |
| case HCCHAR(0): |
| if ((val & HCCHAR_CHDIS) && !(old & HCCHAR_CHDIS)) { |
| val &= ~(HCCHAR_CHENA | HCCHAR_CHDIS); |
| disflg = 1; |
| } else { |
| val |= old & HCCHAR_CHDIS; |
| if ((val & HCCHAR_CHENA) && !(old & HCCHAR_CHENA)) { |
| val &= ~HCCHAR_CHDIS; |
| enflg = 1; |
| } else { |
| val |= old & HCCHAR_CHENA; |
| } |
| } |
| break; |
| case HCINT(0): |
| /* clear the write-1-to-clear bits */ |
| val |= ~old; |
| val = ~val; |
| val &= ~HCINTMSK_RESERVED14_31; |
| iflg = 1; |
| break; |
| case HCINTMSK(0): |
| val &= ~HCINTMSK_RESERVED14_31; |
| iflg = 1; |
| break; |
| case HCDMAB(0): |
| qemu_log_mask(LOG_GUEST_ERROR, "%s: write to read-only register\n", |
| __func__); |
| return; |
| default: |
| break; |
| } |
| |
| trace_usb_dwc2_hreg1_write(addr, hreg1nm[index & 7], index >> 3, orig, |
| old, val); |
| *mmio = val; |
| |
| if (disflg) { |
| /* set ChHltd in HCINT */ |
| s->hreg1[(index & ~7) + 2] |= HCINTMSK_CHHLTD; |
| iflg = 1; |
| } |
| |
| if (enflg) { |
| dwc2_enable_chan(s, index & ~7); |
| } |
| |
| if (iflg) { |
| dwc2_update_hc_irq(s, index & ~7); |
| } |
| } |
| |
| static const char *pcgregnm[] = { |
| "PCGCTL ", "PCGCCTL1 " |
| }; |
| |
| static uint64_t dwc2_pcgreg_read(void *ptr, hwaddr addr, int index, |
| unsigned size) |
| { |
| DWC2State *s = ptr; |
| uint32_t val; |
| |
| assert(addr >= PCGCTL && addr <= PCGCCTL1); |
| val = s->pcgreg[index]; |
| |
| trace_usb_dwc2_pcgreg_read(addr, pcgregnm[index], val); |
| return val; |
| } |
| |
| static void dwc2_pcgreg_write(void *ptr, hwaddr addr, int index, |
| uint64_t val, unsigned size) |
| { |
| DWC2State *s = ptr; |
| uint64_t orig = val; |
| uint32_t *mmio; |
| uint32_t old; |
| |
| assert(addr >= PCGCTL && addr <= PCGCCTL1); |
| mmio = &s->pcgreg[index]; |
| old = *mmio; |
| |
| trace_usb_dwc2_pcgreg_write(addr, pcgregnm[index], orig, old, val); |
| *mmio = val; |
| } |
| |
| static uint64_t dwc2_hsotg_read(void *ptr, hwaddr addr, unsigned size) |
| { |
| uint64_t val; |
| |
| switch (addr) { |
| case HSOTG_REG(0x000) ... HSOTG_REG(0x0fc): |
| val = dwc2_glbreg_read(ptr, addr, (addr - HSOTG_REG(0x000)) >> 2, size); |
| break; |
| case HSOTG_REG(0x100): |
| val = dwc2_fszreg_read(ptr, addr, (addr - HSOTG_REG(0x100)) >> 2, size); |
| break; |
| case HSOTG_REG(0x104) ... HSOTG_REG(0x3fc): |
| /* Gadget-mode registers, just return 0 for now */ |
| val = 0; |
| break; |
| case HSOTG_REG(0x400) ... HSOTG_REG(0x4fc): |
| val = dwc2_hreg0_read(ptr, addr, (addr - HSOTG_REG(0x400)) >> 2, size); |
| break; |
| case HSOTG_REG(0x500) ... HSOTG_REG(0x7fc): |
| val = dwc2_hreg1_read(ptr, addr, (addr - HSOTG_REG(0x500)) >> 2, size); |
| break; |
| case HSOTG_REG(0x800) ... HSOTG_REG(0xdfc): |
| /* Gadget-mode registers, just return 0 for now */ |
| val = 0; |
| break; |
| case HSOTG_REG(0xe00) ... HSOTG_REG(0xffc): |
| val = dwc2_pcgreg_read(ptr, addr, (addr - HSOTG_REG(0xe00)) >> 2, size); |
| break; |
| default: |
| g_assert_not_reached(); |
| } |
| |
| return val; |
| } |
| |
| static void dwc2_hsotg_write(void *ptr, hwaddr addr, uint64_t val, |
| unsigned size) |
| { |
| switch (addr) { |
| case HSOTG_REG(0x000) ... HSOTG_REG(0x0fc): |
| dwc2_glbreg_write(ptr, addr, (addr - HSOTG_REG(0x000)) >> 2, val, size); |
| break; |
| case HSOTG_REG(0x100): |
| dwc2_fszreg_write(ptr, addr, (addr - HSOTG_REG(0x100)) >> 2, val, size); |
| break; |
| case HSOTG_REG(0x104) ... HSOTG_REG(0x3fc): |
| /* Gadget-mode registers, do nothing for now */ |
| break; |
| case HSOTG_REG(0x400) ... HSOTG_REG(0x4fc): |
| dwc2_hreg0_write(ptr, addr, (addr - HSOTG_REG(0x400)) >> 2, val, size); |
| break; |
| case HSOTG_REG(0x500) ... HSOTG_REG(0x7fc): |
| dwc2_hreg1_write(ptr, addr, (addr - HSOTG_REG(0x500)) >> 2, val, size); |
| break; |
| case HSOTG_REG(0x800) ... HSOTG_REG(0xdfc): |
| /* Gadget-mode registers, do nothing for now */ |
| break; |
| case HSOTG_REG(0xe00) ... HSOTG_REG(0xffc): |
| dwc2_pcgreg_write(ptr, addr, (addr - HSOTG_REG(0xe00)) >> 2, val, size); |
| break; |
| default: |
| g_assert_not_reached(); |
| } |
| } |
| |
| static const MemoryRegionOps dwc2_mmio_hsotg_ops = { |
| .read = dwc2_hsotg_read, |
| .write = dwc2_hsotg_write, |
| .impl.min_access_size = 4, |
| .impl.max_access_size = 4, |
| .endianness = DEVICE_LITTLE_ENDIAN, |
| }; |
| |
| static uint64_t dwc2_hreg2_read(void *ptr, hwaddr addr, unsigned size) |
| { |
| /* TODO - implement FIFOs to support slave mode */ |
| trace_usb_dwc2_hreg2_read(addr, addr >> 12, 0); |
| qemu_log_mask(LOG_UNIMP, "FIFO read not implemented\n"); |
| return 0; |
| } |
| |
| static void dwc2_hreg2_write(void *ptr, hwaddr addr, uint64_t val, |
| unsigned size) |
| { |
| uint64_t orig = val; |
| |
| /* TODO - implement FIFOs to support slave mode */ |
| trace_usb_dwc2_hreg2_write(addr, addr >> 12, orig, 0, val); |
| qemu_log_mask(LOG_UNIMP, "FIFO write not implemented\n"); |
| } |
| |
| static const MemoryRegionOps dwc2_mmio_hreg2_ops = { |
| .read = dwc2_hreg2_read, |
| .write = dwc2_hreg2_write, |
| .impl.min_access_size = 4, |
| .impl.max_access_size = 4, |
| .endianness = DEVICE_LITTLE_ENDIAN, |
| }; |
| |
| static void dwc2_wakeup_endpoint(USBBus *bus, USBEndpoint *ep, |
| unsigned int stream) |
| { |
| DWC2State *s = container_of(bus, DWC2State, bus); |
| |
| trace_usb_dwc2_wakeup_endpoint(ep, stream); |
| |
| /* TODO - do something here? */ |
| qemu_bh_schedule(s->async_bh); |
| } |
| |
| static USBBusOps dwc2_bus_ops = { |
| .wakeup_endpoint = dwc2_wakeup_endpoint, |
| }; |
| |
| static void dwc2_work_timer(void *opaque) |
| { |
| DWC2State *s = opaque; |
| |
| trace_usb_dwc2_work_timer(); |
| qemu_bh_schedule(s->async_bh); |
| } |
| |
| static void dwc2_reset_enter(Object *obj, ResetType type) |
| { |
| DWC2Class *c = DWC2_GET_CLASS(obj); |
| DWC2State *s = DWC2_USB(obj); |
| int i; |
| |
| trace_usb_dwc2_reset_enter(); |
| |
| if (c->parent_phases.enter) { |
| c->parent_phases.enter(obj, type); |
| } |
| |
| timer_del(s->frame_timer); |
| qemu_bh_cancel(s->async_bh); |
| |
| if (s->uport.dev && s->uport.dev->attached) { |
| usb_detach(&s->uport); |
| } |
| |
| dwc2_bus_stop(s); |
| |
| s->gotgctl = GOTGCTL_BSESVLD | GOTGCTL_ASESVLD | GOTGCTL_CONID_B; |
| s->gotgint = 0; |
| s->gahbcfg = 0; |
| s->gusbcfg = 5 << GUSBCFG_USBTRDTIM_SHIFT; |
| s->grstctl = GRSTCTL_AHBIDLE; |
| s->gintsts = GINTSTS_CONIDSTSCHNG | GINTSTS_PTXFEMP | GINTSTS_NPTXFEMP | |
| GINTSTS_CURMODE_HOST; |
| s->gintmsk = 0; |
| s->grxstsr = 0; |
| s->grxstsp = 0; |
| s->grxfsiz = 1024; |
| s->gnptxfsiz = 1024 << FIFOSIZE_DEPTH_SHIFT; |
| s->gnptxsts = (4 << FIFOSIZE_DEPTH_SHIFT) | 1024; |
| s->gi2cctl = GI2CCTL_I2CDATSE0 | GI2CCTL_ACK; |
| s->gpvndctl = 0; |
| s->ggpio = 0; |
| s->guid = 0; |
| s->gsnpsid = 0x4f54294a; |
| s->ghwcfg1 = 0; |
| s->ghwcfg2 = (8 << GHWCFG2_DEV_TOKEN_Q_DEPTH_SHIFT) | |
| (4 << GHWCFG2_HOST_PERIO_TX_Q_DEPTH_SHIFT) | |
| (4 << GHWCFG2_NONPERIO_TX_Q_DEPTH_SHIFT) | |
| GHWCFG2_DYNAMIC_FIFO | |
| GHWCFG2_PERIO_EP_SUPPORTED | |
| ((DWC2_NB_CHAN - 1) << GHWCFG2_NUM_HOST_CHAN_SHIFT) | |
| (GHWCFG2_INT_DMA_ARCH << GHWCFG2_ARCHITECTURE_SHIFT) | |
| (GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST << GHWCFG2_OP_MODE_SHIFT); |
| s->ghwcfg3 = (4096 << GHWCFG3_DFIFO_DEPTH_SHIFT) | |
| (4 << GHWCFG3_PACKET_SIZE_CNTR_WIDTH_SHIFT) | |
| (4 << GHWCFG3_XFER_SIZE_CNTR_WIDTH_SHIFT); |
| s->ghwcfg4 = 0; |
| s->glpmcfg = 0; |
| s->gpwrdn = GPWRDN_PWRDNRSTN; |
| s->gdfifocfg = 0; |
| s->gadpctl = 0; |
| s->grefclk = 0; |
| s->gintmsk2 = 0; |
| s->gintsts2 = 0; |
| |
| s->hptxfsiz = 500 << FIFOSIZE_DEPTH_SHIFT; |
| |
| s->hcfg = 2 << HCFG_RESVALID_SHIFT; |
| s->hfir = 60000; |
| s->hfnum = 0x3fff; |
| s->hptxsts = (16 << TXSTS_QSPCAVAIL_SHIFT) | 32768; |
| s->haint = 0; |
| s->haintmsk = 0; |
| s->hprt0 = 0; |
| |
| memset(s->hreg1, 0, sizeof(s->hreg1)); |
| memset(s->pcgreg, 0, sizeof(s->pcgreg)); |
| |
| s->sof_time = 0; |
| s->frame_number = 0; |
| s->fi = USB_FRMINTVL - 1; |
| s->next_chan = 0; |
| s->working = false; |
| |
| for (i = 0; i < DWC2_NB_CHAN; i++) { |
| s->packet[i].needs_service = false; |
| } |
| } |
| |
| static void dwc2_reset_hold(Object *obj) |
| { |
| DWC2Class *c = DWC2_GET_CLASS(obj); |
| DWC2State *s = DWC2_USB(obj); |
| |
| trace_usb_dwc2_reset_hold(); |
| |
| if (c->parent_phases.hold) { |
| c->parent_phases.hold(obj); |
| } |
| |
| dwc2_update_irq(s); |
| } |
| |
| static void dwc2_reset_exit(Object *obj) |
| { |
| DWC2Class *c = DWC2_GET_CLASS(obj); |
| DWC2State *s = DWC2_USB(obj); |
| |
| trace_usb_dwc2_reset_exit(); |
| |
| if (c->parent_phases.exit) { |
| c->parent_phases.exit(obj); |
| } |
| |
| s->hprt0 = HPRT0_PWR; |
| if (s->uport.dev && s->uport.dev->attached) { |
| usb_attach(&s->uport); |
| usb_device_reset(s->uport.dev); |
| } |
| } |
| |
| static void dwc2_realize(DeviceState *dev, Error **errp) |
| { |
| SysBusDevice *sbd = SYS_BUS_DEVICE(dev); |
| DWC2State *s = DWC2_USB(dev); |
| Object *obj; |
| |
| obj = object_property_get_link(OBJECT(dev), "dma-mr", &error_abort); |
| |
| s->dma_mr = MEMORY_REGION(obj); |
| address_space_init(&s->dma_as, s->dma_mr, "dwc2"); |
| |
| usb_bus_new(&s->bus, sizeof(s->bus), &dwc2_bus_ops, dev); |
| usb_register_port(&s->bus, &s->uport, s, 0, &dwc2_port_ops, |
| USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL | |
| (s->usb_version == 2 ? USB_SPEED_MASK_HIGH : 0)); |
| s->uport.dev = 0; |
| |
| s->usb_frame_time = NANOSECONDS_PER_SECOND / 1000; /* 1000000 */ |
| if (NANOSECONDS_PER_SECOND >= USB_HZ_FS) { |
| s->usb_bit_time = NANOSECONDS_PER_SECOND / USB_HZ_FS; /* 83.3 */ |
| } else { |
| s->usb_bit_time = 1; |
| } |
| |
| s->fi = USB_FRMINTVL - 1; |
| s->eof_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, dwc2_frame_boundary, s); |
| s->frame_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, dwc2_work_timer, s); |
| s->async_bh = qemu_bh_new(dwc2_work_bh, s); |
| |
| sysbus_init_irq(sbd, &s->irq); |
| } |
| |
| static void dwc2_init(Object *obj) |
| { |
| SysBusDevice *sbd = SYS_BUS_DEVICE(obj); |
| DWC2State *s = DWC2_USB(obj); |
| |
| memory_region_init(&s->container, obj, "dwc2", DWC2_MMIO_SIZE); |
| sysbus_init_mmio(sbd, &s->container); |
| |
| memory_region_init_io(&s->hsotg, obj, &dwc2_mmio_hsotg_ops, s, |
| "dwc2-io", 4 * KiB); |
| memory_region_add_subregion(&s->container, 0x0000, &s->hsotg); |
| |
| memory_region_init_io(&s->fifos, obj, &dwc2_mmio_hreg2_ops, s, |
| "dwc2-fifo", 64 * KiB); |
| memory_region_add_subregion(&s->container, 0x1000, &s->fifos); |
| } |
| |
| static const VMStateDescription vmstate_dwc2_state_packet = { |
| .name = "dwc2/packet", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (VMStateField[]) { |
| VMSTATE_UINT32(devadr, DWC2Packet), |
| VMSTATE_UINT32(epnum, DWC2Packet), |
| VMSTATE_UINT32(epdir, DWC2Packet), |
| VMSTATE_UINT32(mps, DWC2Packet), |
| VMSTATE_UINT32(pid, DWC2Packet), |
| VMSTATE_UINT32(index, DWC2Packet), |
| VMSTATE_UINT32(pcnt, DWC2Packet), |
| VMSTATE_UINT32(len, DWC2Packet), |
| VMSTATE_INT32(async, DWC2Packet), |
| VMSTATE_BOOL(small, DWC2Packet), |
| VMSTATE_BOOL(needs_service, DWC2Packet), |
| VMSTATE_END_OF_LIST() |
| }, |
| }; |
| |
| const VMStateDescription vmstate_dwc2_state = { |
| .name = "dwc2", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (VMStateField[]) { |
| VMSTATE_UINT32_ARRAY(glbreg, DWC2State, |
| DWC2_GLBREG_SIZE / sizeof(uint32_t)), |
| VMSTATE_UINT32_ARRAY(fszreg, DWC2State, |
| DWC2_FSZREG_SIZE / sizeof(uint32_t)), |
| VMSTATE_UINT32_ARRAY(hreg0, DWC2State, |
| DWC2_HREG0_SIZE / sizeof(uint32_t)), |
| VMSTATE_UINT32_ARRAY(hreg1, DWC2State, |
| DWC2_HREG1_SIZE / sizeof(uint32_t)), |
| VMSTATE_UINT32_ARRAY(pcgreg, DWC2State, |
| DWC2_PCGREG_SIZE / sizeof(uint32_t)), |
| |
| VMSTATE_TIMER_PTR(eof_timer, DWC2State), |
| VMSTATE_TIMER_PTR(frame_timer, DWC2State), |
| VMSTATE_INT64(sof_time, DWC2State), |
| VMSTATE_INT64(usb_frame_time, DWC2State), |
| VMSTATE_INT64(usb_bit_time, DWC2State), |
| VMSTATE_UINT32(usb_version, DWC2State), |
| VMSTATE_UINT16(frame_number, DWC2State), |
| VMSTATE_UINT16(fi, DWC2State), |
| VMSTATE_UINT16(next_chan, DWC2State), |
| VMSTATE_BOOL(working, DWC2State), |
| |
| VMSTATE_STRUCT_ARRAY(packet, DWC2State, DWC2_NB_CHAN, 1, |
| vmstate_dwc2_state_packet, DWC2Packet), |
| VMSTATE_UINT8_2DARRAY(usb_buf, DWC2State, DWC2_NB_CHAN, |
| DWC2_MAX_XFER_SIZE), |
| |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static Property dwc2_usb_properties[] = { |
| DEFINE_PROP_UINT32("usb_version", DWC2State, usb_version, 2), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void dwc2_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| DWC2Class *c = DWC2_CLASS(klass); |
| ResettableClass *rc = RESETTABLE_CLASS(klass); |
| |
| dc->realize = dwc2_realize; |
| dc->vmsd = &vmstate_dwc2_state; |
| set_bit(DEVICE_CATEGORY_USB, dc->categories); |
| device_class_set_props(dc, dwc2_usb_properties); |
| resettable_class_set_parent_phases(rc, dwc2_reset_enter, dwc2_reset_hold, |
| dwc2_reset_exit, &c->parent_phases); |
| } |
| |
| static const TypeInfo dwc2_usb_type_info = { |
| .name = TYPE_DWC2_USB, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(DWC2State), |
| .instance_init = dwc2_init, |
| .class_size = sizeof(DWC2Class), |
| .class_init = dwc2_class_init, |
| }; |
| |
| static void dwc2_usb_register_types(void) |
| { |
| type_register_static(&dwc2_usb_type_info); |
| } |
| |
| type_init(dwc2_usb_register_types) |