| /* | |
| * ARM CMSDK APB timer emulation | |
| * | |
| * Copyright (c) 2017 Linaro Limited | |
| * Written by Peter Maydell | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 or | |
| * (at your option) any later version. | |
| */ | |
| /* This is a model of the "APB timer" which is part of the Cortex-M | |
| * System Design Kit (CMSDK) and documented in the Cortex-M System | |
| * Design Kit Technical Reference Manual (ARM DDI0479C): | |
| * https://developer.arm.com/products/system-design/system-design-kits/cortex-m-system-design-kit | |
| * | |
| * The hardware has an EXTIN input wire, which can be configured | |
| * by the guest to act either as a 'timer enable' (timer does not run | |
| * when EXTIN is low), or as a 'timer clock' (timer runs at frequency | |
| * of EXTIN clock, not PCLK frequency). We don't model this. | |
| * | |
| * The documentation is not very clear about the exact behaviour; | |
| * we choose to implement that the interrupt is triggered when | |
| * the counter goes from 1 to 0, that the counter then holds at 0 | |
| * for one clock cycle before reloading from the RELOAD register, | |
| * and that if the RELOAD register is 0 this does not cause an | |
| * interrupt (as there is no further 1->0 transition). | |
| */ | |
| #include "qemu/osdep.h" | |
| #include "qemu/log.h" | |
| #include "qemu/module.h" | |
| #include "qapi/error.h" | |
| #include "trace.h" | |
| #include "hw/core/sysbus.h" | |
| #include "hw/core/irq.h" | |
| #include "hw/core/registerfields.h" | |
| #include "hw/core/qdev-clock.h" | |
| #include "hw/timer/cmsdk-apb-timer.h" | |
| #include "migration/vmstate.h" | |
| REG32(CTRL, 0) | |
| FIELD(CTRL, EN, 0, 1) | |
| FIELD(CTRL, SELEXTEN, 1, 1) | |
| FIELD(CTRL, SELEXTCLK, 2, 1) | |
| FIELD(CTRL, IRQEN, 3, 1) | |
| REG32(VALUE, 4) | |
| REG32(RELOAD, 8) | |
| REG32(INTSTATUS, 0xc) | |
| FIELD(INTSTATUS, IRQ, 0, 1) | |
| REG32(PID4, 0xFD0) | |
| REG32(PID5, 0xFD4) | |
| REG32(PID6, 0xFD8) | |
| REG32(PID7, 0xFDC) | |
| REG32(PID0, 0xFE0) | |
| REG32(PID1, 0xFE4) | |
| REG32(PID2, 0xFE8) | |
| REG32(PID3, 0xFEC) | |
| REG32(CID0, 0xFF0) | |
| REG32(CID1, 0xFF4) | |
| REG32(CID2, 0xFF8) | |
| REG32(CID3, 0xFFC) | |
| /* PID/CID values */ | |
| static const int timer_id[] = { | |
| 0x04, 0x00, 0x00, 0x00, /* PID4..PID7 */ | |
| 0x22, 0xb8, 0x1b, 0x00, /* PID0..PID3 */ | |
| 0x0d, 0xf0, 0x05, 0xb1, /* CID0..CID3 */ | |
| }; | |
| static void cmsdk_apb_timer_update(CMSDKAPBTimer *s) | |
| { | |
| qemu_set_irq(s->timerint, !!(s->intstatus & R_INTSTATUS_IRQ_MASK)); | |
| } | |
| static uint64_t cmsdk_apb_timer_read(void *opaque, hwaddr offset, unsigned size) | |
| { | |
| CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); | |
| uint64_t r; | |
| switch (offset) { | |
| case A_CTRL: | |
| r = s->ctrl; | |
| break; | |
| case A_VALUE: | |
| r = ptimer_get_count(s->timer); | |
| break; | |
| case A_RELOAD: | |
| r = ptimer_get_limit(s->timer); | |
| break; | |
| case A_INTSTATUS: | |
| r = s->intstatus; | |
| break; | |
| case A_PID4 ... A_CID3: | |
| r = timer_id[(offset - A_PID4) / 4]; | |
| break; | |
| default: | |
| qemu_log_mask(LOG_GUEST_ERROR, | |
| "CMSDK APB timer read: bad offset %x\n", (int) offset); | |
| r = 0; | |
| break; | |
| } | |
| trace_cmsdk_apb_timer_read(offset, r, size); | |
| return r; | |
| } | |
| static void cmsdk_apb_timer_write(void *opaque, hwaddr offset, uint64_t value, | |
| unsigned size) | |
| { | |
| CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); | |
| trace_cmsdk_apb_timer_write(offset, value, size); | |
| switch (offset) { | |
| case A_CTRL: | |
| if (value & 6) { | |
| /* Bits [1] and [2] enable using EXTIN as either clock or | |
| * an enable line. We don't model this. | |
| */ | |
| qemu_log_mask(LOG_UNIMP, | |
| "CMSDK APB timer: EXTIN input not supported\n"); | |
| } | |
| s->ctrl = value & 0xf; | |
| ptimer_transaction_begin(s->timer); | |
| if (s->ctrl & R_CTRL_EN_MASK) { | |
| ptimer_run(s->timer, ptimer_get_limit(s->timer) == 0); | |
| } else { | |
| ptimer_stop(s->timer); | |
| } | |
| ptimer_transaction_commit(s->timer); | |
| break; | |
| case A_RELOAD: | |
| /* Writing to reload also sets the current timer value */ | |
| ptimer_transaction_begin(s->timer); | |
| if (!value) { | |
| ptimer_stop(s->timer); | |
| } | |
| ptimer_set_limit(s->timer, value, 1); | |
| if (value && (s->ctrl & R_CTRL_EN_MASK)) { | |
| /* | |
| * Make sure timer is running (it might have stopped if this | |
| * was an expired one-shot timer) | |
| */ | |
| ptimer_run(s->timer, 0); | |
| } | |
| ptimer_transaction_commit(s->timer); | |
| break; | |
| case A_VALUE: | |
| ptimer_transaction_begin(s->timer); | |
| if (!value && !ptimer_get_limit(s->timer)) { | |
| ptimer_stop(s->timer); | |
| } | |
| ptimer_set_count(s->timer, value); | |
| if (value && (s->ctrl & R_CTRL_EN_MASK)) { | |
| ptimer_run(s->timer, ptimer_get_limit(s->timer) == 0); | |
| } | |
| ptimer_transaction_commit(s->timer); | |
| break; | |
| case A_INTSTATUS: | |
| /* Just one bit, which is W1C. */ | |
| value &= 1; | |
| s->intstatus &= ~value; | |
| cmsdk_apb_timer_update(s); | |
| break; | |
| case A_PID4 ... A_CID3: | |
| qemu_log_mask(LOG_GUEST_ERROR, | |
| "CMSDK APB timer write: write to RO offset 0x%x\n", | |
| (int)offset); | |
| break; | |
| default: | |
| qemu_log_mask(LOG_GUEST_ERROR, | |
| "CMSDK APB timer write: bad offset 0x%x\n", (int) offset); | |
| break; | |
| } | |
| } | |
| static const MemoryRegionOps cmsdk_apb_timer_ops = { | |
| .read = cmsdk_apb_timer_read, | |
| .write = cmsdk_apb_timer_write, | |
| .endianness = DEVICE_LITTLE_ENDIAN, | |
| }; | |
| static void cmsdk_apb_timer_tick(void *opaque) | |
| { | |
| CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); | |
| if (s->ctrl & R_CTRL_IRQEN_MASK) { | |
| s->intstatus |= R_INTSTATUS_IRQ_MASK; | |
| cmsdk_apb_timer_update(s); | |
| } | |
| } | |
| static void cmsdk_apb_timer_reset(DeviceState *dev) | |
| { | |
| CMSDKAPBTimer *s = CMSDK_APB_TIMER(dev); | |
| trace_cmsdk_apb_timer_reset(); | |
| s->ctrl = 0; | |
| s->intstatus = 0; | |
| ptimer_transaction_begin(s->timer); | |
| ptimer_stop(s->timer); | |
| /* Set the limit and the count */ | |
| ptimer_set_limit(s->timer, 0, 1); | |
| ptimer_transaction_commit(s->timer); | |
| } | |
| static void cmsdk_apb_timer_clk_update(void *opaque, ClockEvent event) | |
| { | |
| CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); | |
| ptimer_transaction_begin(s->timer); | |
| ptimer_set_period_from_clock(s->timer, s->pclk, 1); | |
| ptimer_transaction_commit(s->timer); | |
| } | |
| static void cmsdk_apb_timer_init(Object *obj) | |
| { | |
| SysBusDevice *sbd = SYS_BUS_DEVICE(obj); | |
| CMSDKAPBTimer *s = CMSDK_APB_TIMER(obj); | |
| memory_region_init_io(&s->iomem, obj, &cmsdk_apb_timer_ops, | |
| s, "cmsdk-apb-timer", 0x1000); | |
| sysbus_init_mmio(sbd, &s->iomem); | |
| sysbus_init_irq(sbd, &s->timerint); | |
| s->pclk = qdev_init_clock_in(DEVICE(s), "pclk", | |
| cmsdk_apb_timer_clk_update, s, ClockUpdate); | |
| } | |
| static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) | |
| { | |
| CMSDKAPBTimer *s = CMSDK_APB_TIMER(dev); | |
| if (!clock_has_source(s->pclk)) { | |
| error_setg(errp, "CMSDK APB timer: pclk clock must be connected"); | |
| return; | |
| } | |
| s->timer = ptimer_init(cmsdk_apb_timer_tick, s, | |
| PTIMER_POLICY_WRAP_AFTER_ONE_PERIOD | | |
| PTIMER_POLICY_TRIGGER_ONLY_ON_DECREMENT | | |
| PTIMER_POLICY_NO_IMMEDIATE_RELOAD | | |
| PTIMER_POLICY_NO_COUNTER_ROUND_DOWN); | |
| ptimer_transaction_begin(s->timer); | |
| ptimer_set_period_from_clock(s->timer, s->pclk, 1); | |
| ptimer_transaction_commit(s->timer); | |
| } | |
| static const VMStateDescription cmsdk_apb_timer_vmstate = { | |
| .name = "cmsdk-apb-timer", | |
| .version_id = 2, | |
| .minimum_version_id = 2, | |
| .fields = (const VMStateField[]) { | |
| VMSTATE_PTIMER(timer, CMSDKAPBTimer), | |
| VMSTATE_CLOCK(pclk, CMSDKAPBTimer), | |
| VMSTATE_UINT32(ctrl, CMSDKAPBTimer), | |
| VMSTATE_UINT32(value, CMSDKAPBTimer), | |
| VMSTATE_UINT32(reload, CMSDKAPBTimer), | |
| VMSTATE_UINT32(intstatus, CMSDKAPBTimer), | |
| VMSTATE_END_OF_LIST() | |
| } | |
| }; | |
| static void cmsdk_apb_timer_class_init(ObjectClass *klass, const void *data) | |
| { | |
| DeviceClass *dc = DEVICE_CLASS(klass); | |
| dc->realize = cmsdk_apb_timer_realize; | |
| dc->vmsd = &cmsdk_apb_timer_vmstate; | |
| device_class_set_legacy_reset(dc, cmsdk_apb_timer_reset); | |
| } | |
| static const TypeInfo cmsdk_apb_timer_info = { | |
| .name = TYPE_CMSDK_APB_TIMER, | |
| .parent = TYPE_SYS_BUS_DEVICE, | |
| .instance_size = sizeof(CMSDKAPBTimer), | |
| .instance_init = cmsdk_apb_timer_init, | |
| .class_init = cmsdk_apb_timer_class_init, | |
| }; | |
| static void cmsdk_apb_timer_register_types(void) | |
| { | |
| type_register_static(&cmsdk_apb_timer_info); | |
| } | |
| type_init(cmsdk_apb_timer_register_types); |