|  | /* | 
|  | * PalmOne's (TM) PDAs. | 
|  | * | 
|  | * Copyright (C) 2006-2007 Andrzej Zaborowski  <balrog@zabor.org> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License as | 
|  | * published by the Free Software Foundation; either version 2 or | 
|  | * (at your option) version 3 of the License. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License along | 
|  | * with this program; if not, see <http://www.gnu.org/licenses/>. | 
|  | */ | 
|  |  | 
|  | #include "qemu/osdep.h" | 
|  | #include "qapi/error.h" | 
|  | #include "audio/audio.h" | 
|  | #include "sysemu/sysemu.h" | 
|  | #include "sysemu/qtest.h" | 
|  | #include "ui/console.h" | 
|  | #include "hw/arm/omap.h" | 
|  | #include "hw/boards.h" | 
|  | #include "hw/arm/boot.h" | 
|  | #include "hw/input/tsc2xxx.h" | 
|  | #include "hw/irq.h" | 
|  | #include "hw/loader.h" | 
|  | #include "cpu.h" | 
|  | #include "qemu/cutils.h" | 
|  | #include "qom/object.h" | 
|  | #include "qemu/error-report.h" | 
|  |  | 
|  |  | 
|  | static uint64_t static_read(void *opaque, hwaddr offset, unsigned size) | 
|  | { | 
|  | uint32_t *val = (uint32_t *)opaque; | 
|  | uint32_t sizemask = 7 >> size; | 
|  |  | 
|  | return *val >> ((offset & sizemask) << 3); | 
|  | } | 
|  |  | 
|  | static void static_write(void *opaque, hwaddr offset, uint64_t value, | 
|  | unsigned size) | 
|  | { | 
|  | #ifdef SPY | 
|  | printf("%s: value %08lx written at " PA_FMT "\n", | 
|  | __func__, value, offset); | 
|  | #endif | 
|  | } | 
|  |  | 
|  | static const MemoryRegionOps static_ops = { | 
|  | .read = static_read, | 
|  | .write = static_write, | 
|  | .valid.min_access_size = 1, | 
|  | .valid.max_access_size = 4, | 
|  | .endianness = DEVICE_NATIVE_ENDIAN, | 
|  | }; | 
|  |  | 
|  | /* Palm Tunsgten|E support */ | 
|  |  | 
|  | /* Shared GPIOs */ | 
|  | #define PALMTE_USBDETECT_GPIO   0 | 
|  | #define PALMTE_USB_OR_DC_GPIO   1 | 
|  | #define PALMTE_TSC_GPIO                 4 | 
|  | #define PALMTE_PINTDAV_GPIO     6 | 
|  | #define PALMTE_MMC_WP_GPIO      8 | 
|  | #define PALMTE_MMC_POWER_GPIO   9 | 
|  | #define PALMTE_HDQ_GPIO                 11 | 
|  | #define PALMTE_HEADPHONES_GPIO  14 | 
|  | #define PALMTE_SPEAKER_GPIO     15 | 
|  | /* MPU private GPIOs */ | 
|  | #define PALMTE_DC_GPIO          2 | 
|  | #define PALMTE_MMC_SWITCH_GPIO  4 | 
|  | #define PALMTE_MMC1_GPIO        6 | 
|  | #define PALMTE_MMC2_GPIO        7 | 
|  | #define PALMTE_MMC3_GPIO        11 | 
|  |  | 
|  | static MouseTransformInfo palmte_pointercal = { | 
|  | .x = 320, | 
|  | .y = 320, | 
|  | .a = { -5909, 8, 22465308, 104, 7644, -1219972, 65536 }, | 
|  | }; | 
|  |  | 
|  | static void palmte_microwire_setup(struct omap_mpu_state_s *cpu) | 
|  | { | 
|  | uWireSlave *tsc; | 
|  |  | 
|  | tsc = tsc2102_init(qdev_get_gpio_in(cpu->gpio, PALMTE_PINTDAV_GPIO)); | 
|  |  | 
|  | omap_uwire_attach(cpu->microwire, tsc, 0); | 
|  | omap_mcbsp_i2s_attach(cpu->mcbsp1, tsc210x_codec(tsc)); | 
|  |  | 
|  | tsc210x_set_transform(tsc, &palmte_pointercal); | 
|  | } | 
|  |  | 
|  | static struct { | 
|  | int row; | 
|  | int column; | 
|  | } palmte_keymap[0x80] = { | 
|  | [0 ... 0x7f] = { -1, -1 }, | 
|  | [0x3b] = { 0, 0 },  /* F1   -> Calendar */ | 
|  | [0x3c] = { 1, 0 },  /* F2   -> Contacts */ | 
|  | [0x3d] = { 2, 0 },  /* F3   -> Tasks List */ | 
|  | [0x3e] = { 3, 0 },  /* F4   -> Note Pad */ | 
|  | [0x01] = { 4, 0 },  /* Esc  -> Power */ | 
|  | [0x4b] = { 0, 1 },  /*         Left */ | 
|  | [0x50] = { 1, 1 },  /*         Down */ | 
|  | [0x48] = { 2, 1 },  /*         Up */ | 
|  | [0x4d] = { 3, 1 },  /*         Right */ | 
|  | [0x4c] = { 4, 1 },  /*         Centre */ | 
|  | [0x39] = { 4, 1 },  /* Spc  -> Centre */ | 
|  | }; | 
|  |  | 
|  | static void palmte_button_event(void *opaque, int keycode) | 
|  | { | 
|  | struct omap_mpu_state_s *cpu = opaque; | 
|  |  | 
|  | if (palmte_keymap[keycode & 0x7f].row != -1) | 
|  | omap_mpuio_key(cpu->mpuio, | 
|  | palmte_keymap[keycode & 0x7f].row, | 
|  | palmte_keymap[keycode & 0x7f].column, | 
|  | !(keycode & 0x80)); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Encapsulation of some GPIO line behaviour for the Palm board | 
|  | * | 
|  | * QEMU interface: | 
|  | *  + unnamed GPIO inputs 0..6: for the various miscellaneous input lines | 
|  | */ | 
|  |  | 
|  | #define TYPE_PALM_MISC_GPIO "palm-misc-gpio" | 
|  | OBJECT_DECLARE_SIMPLE_TYPE(PalmMiscGPIOState, PALM_MISC_GPIO) | 
|  |  | 
|  | struct PalmMiscGPIOState { | 
|  | SysBusDevice parent_obj; | 
|  | }; | 
|  |  | 
|  | static void palmte_onoff_gpios(void *opaque, int line, int level) | 
|  | { | 
|  | switch (line) { | 
|  | case 0: | 
|  | printf("%s: current to MMC/SD card %sabled.\n", | 
|  | __func__, level ? "dis" : "en"); | 
|  | break; | 
|  | case 1: | 
|  | printf("%s: internal speaker amplifier %s.\n", | 
|  | __func__, level ? "down" : "on"); | 
|  | break; | 
|  |  | 
|  | /* These LCD & Audio output signals have not been identified yet.  */ | 
|  | case 2: | 
|  | case 3: | 
|  | case 4: | 
|  | printf("%s: LCD GPIO%i %s.\n", | 
|  | __func__, line - 1, level ? "high" : "low"); | 
|  | break; | 
|  | case 5: | 
|  | case 6: | 
|  | printf("%s: Audio GPIO%i %s.\n", | 
|  | __func__, line - 4, level ? "high" : "low"); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void palm_misc_gpio_init(Object *obj) | 
|  | { | 
|  | DeviceState *dev = DEVICE(obj); | 
|  |  | 
|  | qdev_init_gpio_in(dev, palmte_onoff_gpios, 7); | 
|  | } | 
|  |  | 
|  | static const TypeInfo palm_misc_gpio_info = { | 
|  | .name = TYPE_PALM_MISC_GPIO, | 
|  | .parent = TYPE_SYS_BUS_DEVICE, | 
|  | .instance_size = sizeof(PalmMiscGPIOState), | 
|  | .instance_init = palm_misc_gpio_init, | 
|  | /* | 
|  | * No class init required: device has no internal state so does not | 
|  | * need to set up reset or vmstate, and has no realize method. | 
|  | */ | 
|  | }; | 
|  |  | 
|  | static void palmte_gpio_setup(struct omap_mpu_state_s *cpu) | 
|  | { | 
|  | DeviceState *misc_gpio; | 
|  |  | 
|  | misc_gpio = sysbus_create_simple(TYPE_PALM_MISC_GPIO, -1, NULL); | 
|  |  | 
|  | omap_mmc_handlers(cpu->mmc, | 
|  | qdev_get_gpio_in(cpu->gpio, PALMTE_MMC_WP_GPIO), | 
|  | qemu_irq_invert(omap_mpuio_in_get(cpu->mpuio) | 
|  | [PALMTE_MMC_SWITCH_GPIO])); | 
|  |  | 
|  | qdev_connect_gpio_out(cpu->gpio, PALMTE_MMC_POWER_GPIO, | 
|  | qdev_get_gpio_in(misc_gpio, 0)); | 
|  | qdev_connect_gpio_out(cpu->gpio, PALMTE_SPEAKER_GPIO, | 
|  | qdev_get_gpio_in(misc_gpio, 1)); | 
|  | qdev_connect_gpio_out(cpu->gpio, 11, qdev_get_gpio_in(misc_gpio, 2)); | 
|  | qdev_connect_gpio_out(cpu->gpio, 12, qdev_get_gpio_in(misc_gpio, 3)); | 
|  | qdev_connect_gpio_out(cpu->gpio, 13, qdev_get_gpio_in(misc_gpio, 4)); | 
|  | omap_mpuio_out_set(cpu->mpuio, 1, qdev_get_gpio_in(misc_gpio, 5)); | 
|  | omap_mpuio_out_set(cpu->mpuio, 3, qdev_get_gpio_in(misc_gpio, 6)); | 
|  |  | 
|  | /* Reset some inputs to initial state.  */ | 
|  | qemu_irq_lower(qdev_get_gpio_in(cpu->gpio, PALMTE_USBDETECT_GPIO)); | 
|  | qemu_irq_lower(qdev_get_gpio_in(cpu->gpio, PALMTE_USB_OR_DC_GPIO)); | 
|  | qemu_irq_lower(qdev_get_gpio_in(cpu->gpio, 4)); | 
|  | qemu_irq_lower(qdev_get_gpio_in(cpu->gpio, PALMTE_HEADPHONES_GPIO)); | 
|  | qemu_irq_lower(omap_mpuio_in_get(cpu->mpuio)[PALMTE_DC_GPIO]); | 
|  | qemu_irq_raise(omap_mpuio_in_get(cpu->mpuio)[6]); | 
|  | qemu_irq_raise(omap_mpuio_in_get(cpu->mpuio)[7]); | 
|  | qemu_irq_raise(omap_mpuio_in_get(cpu->mpuio)[11]); | 
|  | } | 
|  |  | 
|  | static struct arm_boot_info palmte_binfo = { | 
|  | .loader_start = OMAP_EMIFF_BASE, | 
|  | .ram_size = 0x02000000, | 
|  | .board_id = 0x331, | 
|  | }; | 
|  |  | 
|  | static void palmte_init(MachineState *machine) | 
|  | { | 
|  | MemoryRegion *address_space_mem = get_system_memory(); | 
|  | struct omap_mpu_state_s *mpu; | 
|  | int flash_size = 0x00800000; | 
|  | static uint32_t cs0val = 0xffffffff; | 
|  | static uint32_t cs1val = 0x0000e1a0; | 
|  | static uint32_t cs2val = 0x0000e1a0; | 
|  | static uint32_t cs3val = 0xe1a0e1a0; | 
|  | int rom_size, rom_loaded = 0; | 
|  | MachineClass *mc = MACHINE_GET_CLASS(machine); | 
|  | MemoryRegion *flash = g_new(MemoryRegion, 1); | 
|  | MemoryRegion *cs = g_new(MemoryRegion, 4); | 
|  |  | 
|  | if (machine->ram_size != mc->default_ram_size) { | 
|  | char *sz = size_to_str(mc->default_ram_size); | 
|  | error_report("Invalid RAM size, should be %s", sz); | 
|  | g_free(sz); | 
|  | exit(EXIT_FAILURE); | 
|  | } | 
|  |  | 
|  | memory_region_add_subregion(address_space_mem, OMAP_EMIFF_BASE, | 
|  | machine->ram); | 
|  |  | 
|  | mpu = omap310_mpu_init(machine->ram, machine->cpu_type); | 
|  |  | 
|  | /* External Flash (EMIFS) */ | 
|  | memory_region_init_rom(flash, NULL, "palmte.flash", flash_size, | 
|  | &error_fatal); | 
|  | memory_region_add_subregion(address_space_mem, OMAP_CS0_BASE, flash); | 
|  |  | 
|  | memory_region_init_io(&cs[0], NULL, &static_ops, &cs0val, "palmte-cs0", | 
|  | OMAP_CS0_SIZE - flash_size); | 
|  | memory_region_add_subregion(address_space_mem, OMAP_CS0_BASE + flash_size, | 
|  | &cs[0]); | 
|  | memory_region_init_io(&cs[1], NULL, &static_ops, &cs1val, "palmte-cs1", | 
|  | OMAP_CS1_SIZE); | 
|  | memory_region_add_subregion(address_space_mem, OMAP_CS1_BASE, &cs[1]); | 
|  | memory_region_init_io(&cs[2], NULL, &static_ops, &cs2val, "palmte-cs2", | 
|  | OMAP_CS2_SIZE); | 
|  | memory_region_add_subregion(address_space_mem, OMAP_CS2_BASE, &cs[2]); | 
|  | memory_region_init_io(&cs[3], NULL, &static_ops, &cs3val, "palmte-cs3", | 
|  | OMAP_CS3_SIZE); | 
|  | memory_region_add_subregion(address_space_mem, OMAP_CS3_BASE, &cs[3]); | 
|  |  | 
|  | palmte_microwire_setup(mpu); | 
|  |  | 
|  | qemu_add_kbd_event_handler(palmte_button_event, mpu); | 
|  |  | 
|  | palmte_gpio_setup(mpu); | 
|  |  | 
|  | /* Setup initial (reset) machine state */ | 
|  | if (nb_option_roms) { | 
|  | rom_size = get_image_size(option_rom[0].name); | 
|  | if (rom_size > flash_size) { | 
|  | fprintf(stderr, "%s: ROM image too big (%x > %x)\n", | 
|  | __func__, rom_size, flash_size); | 
|  | rom_size = 0; | 
|  | } | 
|  | if (rom_size > 0) { | 
|  | rom_size = load_image_targphys(option_rom[0].name, OMAP_CS0_BASE, | 
|  | flash_size); | 
|  | rom_loaded = 1; | 
|  | } | 
|  | if (rom_size < 0) { | 
|  | fprintf(stderr, "%s: error loading '%s'\n", | 
|  | __func__, option_rom[0].name); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!rom_loaded && !machine->kernel_filename && !qtest_enabled()) { | 
|  | fprintf(stderr, "Kernel or ROM image must be specified\n"); | 
|  | exit(1); | 
|  | } | 
|  |  | 
|  | /* Load the kernel.  */ | 
|  | arm_load_kernel(mpu->cpu, machine, &palmte_binfo); | 
|  | } | 
|  |  | 
|  | static void palmte_machine_init(MachineClass *mc) | 
|  | { | 
|  | mc->desc = "Palm Tungsten|E aka. Cheetah PDA (OMAP310)"; | 
|  | mc->init = palmte_init; | 
|  | mc->ignore_memory_transaction_failures = true; | 
|  | mc->default_cpu_type = ARM_CPU_TYPE_NAME("ti925t"); | 
|  | mc->default_ram_size = 0x02000000; | 
|  | mc->default_ram_id = "omap1.dram"; | 
|  | } | 
|  |  | 
|  | DEFINE_MACHINE("cheetah", palmte_machine_init) | 
|  |  | 
|  | static void palm_register_types(void) | 
|  | { | 
|  | type_register_static(&palm_misc_gpio_info); | 
|  | } | 
|  |  | 
|  | type_init(palm_register_types) |