| /* |
| * Copyright (c) 2011, Max Filippov, Open Source and Linux Lab. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * * Neither the name of the Open Source and Linux Lab nor the |
| * names of its contributors may be used to endorse or promote products |
| * derived from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include "sysemu.h" |
| #include "boards.h" |
| #include "loader.h" |
| #include "elf.h" |
| #include "memory.h" |
| #include "exec-memory.h" |
| #include "pc.h" |
| #include "sysbus.h" |
| |
| typedef struct Lx60FpgaState { |
| MemoryRegion iomem; |
| uint32_t leds; |
| uint32_t switches; |
| } Lx60FpgaState; |
| |
| static void lx60_fpga_reset(void *opaque) |
| { |
| Lx60FpgaState *s = opaque; |
| |
| s->leds = 0; |
| s->switches = 0; |
| } |
| |
| static uint64_t lx60_fpga_read(void *opaque, target_phys_addr_t addr, |
| unsigned size) |
| { |
| Lx60FpgaState *s = opaque; |
| |
| switch (addr) { |
| case 0x0: /*build date code*/ |
| return 0x27092011; |
| |
| case 0x4: /*processor clock frequency, Hz*/ |
| return 10000000; |
| |
| case 0x8: /*LEDs (off = 0, on = 1)*/ |
| return s->leds; |
| |
| case 0xc: /*DIP switches (off = 0, on = 1)*/ |
| return s->switches; |
| } |
| return 0; |
| } |
| |
| static void lx60_fpga_write(void *opaque, target_phys_addr_t addr, |
| uint64_t val, unsigned size) |
| { |
| Lx60FpgaState *s = opaque; |
| |
| switch (addr) { |
| case 0x8: /*LEDs (off = 0, on = 1)*/ |
| s->leds = val; |
| break; |
| |
| case 0x10: /*board reset*/ |
| if (val == 0xdead) { |
| qemu_system_reset_request(); |
| } |
| break; |
| } |
| } |
| |
| static const MemoryRegionOps lx60_fpga_ops = { |
| .read = lx60_fpga_read, |
| .write = lx60_fpga_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static Lx60FpgaState *lx60_fpga_init(MemoryRegion *address_space, |
| target_phys_addr_t base) |
| { |
| Lx60FpgaState *s = g_malloc(sizeof(Lx60FpgaState)); |
| |
| memory_region_init_io(&s->iomem, &lx60_fpga_ops, s, |
| "lx60-fpga", 0x10000); |
| memory_region_add_subregion(address_space, base, &s->iomem); |
| lx60_fpga_reset(s); |
| qemu_register_reset(lx60_fpga_reset, s); |
| return s; |
| } |
| |
| static void lx60_net_init(MemoryRegion *address_space, |
| target_phys_addr_t base, |
| target_phys_addr_t descriptors, |
| target_phys_addr_t buffers, |
| qemu_irq irq, NICInfo *nd) |
| { |
| DeviceState *dev; |
| SysBusDevice *s; |
| MemoryRegion *ram; |
| |
| dev = qdev_create(NULL, "open_eth"); |
| qdev_set_nic_properties(dev, nd); |
| qdev_init_nofail(dev); |
| |
| s = sysbus_from_qdev(dev); |
| sysbus_connect_irq(s, 0, irq); |
| memory_region_add_subregion(address_space, base, |
| sysbus_mmio_get_region(s, 0)); |
| memory_region_add_subregion(address_space, descriptors, |
| sysbus_mmio_get_region(s, 1)); |
| |
| ram = g_malloc(sizeof(*ram)); |
| memory_region_init_ram(ram, NULL, "open_eth.ram", 16384); |
| memory_region_add_subregion(address_space, buffers, ram); |
| } |
| |
| static uint64_t translate_phys_addr(void *env, uint64_t addr) |
| { |
| return cpu_get_phys_page_debug(env, addr); |
| } |
| |
| static void lx60_reset(void *env) |
| { |
| cpu_reset(env); |
| } |
| |
| static void lx60_init(ram_addr_t ram_size, |
| const char *boot_device, |
| const char *kernel_filename, const char *kernel_cmdline, |
| const char *initrd_filename, const char *cpu_model) |
| { |
| #ifdef TARGET_WORDS_BIGENDIAN |
| int be = 1; |
| #else |
| int be = 0; |
| #endif |
| MemoryRegion *system_memory = get_system_memory(); |
| CPUState *env = NULL; |
| MemoryRegion *ram, *rom, *system_io; |
| int n; |
| |
| for (n = 0; n < smp_cpus; n++) { |
| env = cpu_init(cpu_model); |
| if (!env) { |
| fprintf(stderr, "Unable to find CPU definition\n"); |
| exit(1); |
| } |
| env->sregs[PRID] = n; |
| qemu_register_reset(lx60_reset, env); |
| /* Need MMU initialized prior to ELF loading, |
| * so that ELF gets loaded into virtual addresses |
| */ |
| cpu_reset(env); |
| } |
| |
| ram = g_malloc(sizeof(*ram)); |
| memory_region_init_ram(ram, NULL, "xtensa.sram", ram_size); |
| memory_region_add_subregion(system_memory, 0, ram); |
| |
| rom = g_malloc(sizeof(*rom)); |
| memory_region_init_ram(rom, NULL, "xtensa.rom", 0x1000); |
| memory_region_add_subregion(system_memory, 0xfe000000, rom); |
| |
| system_io = g_malloc(sizeof(*system_io)); |
| memory_region_init(system_io, "system.io", 224 * 1024 * 1024); |
| memory_region_add_subregion(system_memory, 0xf0000000, system_io); |
| lx60_fpga_init(system_io, 0x0d020000); |
| if (nd_table[0].vlan) { |
| lx60_net_init(system_io, 0x0d030000, 0x0d030400, 0x0d800000, |
| xtensa_get_extint(env, 1), nd_table); |
| } |
| |
| if (!serial_hds[0]) { |
| serial_hds[0] = qemu_chr_new("serial0", "null", NULL); |
| } |
| |
| serial_mm_init(system_io, 0x0d050020, 2, xtensa_get_extint(env, 0), |
| 115200, serial_hds[0], DEVICE_NATIVE_ENDIAN); |
| |
| if (kernel_filename) { |
| uint64_t elf_entry; |
| uint64_t elf_lowaddr; |
| int success = load_elf(kernel_filename, translate_phys_addr, env, |
| &elf_entry, &elf_lowaddr, NULL, be, ELF_MACHINE, 0); |
| if (success > 0) { |
| env->pc = elf_entry; |
| } |
| } |
| } |
| |
| static void xtensa_lx60_init(ram_addr_t ram_size, |
| const char *boot_device, |
| const char *kernel_filename, const char *kernel_cmdline, |
| const char *initrd_filename, const char *cpu_model) |
| { |
| if (!cpu_model) { |
| cpu_model = "dc232b"; |
| } |
| lx60_init(ram_size, boot_device, kernel_filename, kernel_cmdline, |
| initrd_filename, cpu_model); |
| } |
| |
| static QEMUMachine xtensa_lx60_machine = { |
| .name = "lx60", |
| .desc = "lx60 EVB (dc232b)", |
| .init = xtensa_lx60_init, |
| .max_cpus = 4, |
| }; |
| |
| static void xtensa_lx60_machine_init(void) |
| { |
| qemu_register_machine(&xtensa_lx60_machine); |
| } |
| |
| machine_init(xtensa_lx60_machine_init); |