| /* |
| * Nuvoton NPCM7xx EMC Module |
| * |
| * Copyright 2020 Google LLC |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * for more details. |
| * |
| * Unsupported/unimplemented features: |
| * - MCMDR.FDUP (full duplex) is ignored, half duplex is not supported |
| * - Only CAM0 is supported, CAM[1-15] are not |
| * - writes to CAMEN.[1-15] are ignored, these bits always read as zeroes |
| * - MII is not implemented, MIIDA.BUSY and MIID always return zero |
| * - MCMDR.LBK is not implemented |
| * - MCMDR.{OPMOD,ENSQE,AEP,ARP} are not supported |
| * - H/W FIFOs are not supported, MCMDR.FFTCR is ignored |
| * - MGSTA.SQE is not supported |
| * - pause and control frames are not implemented |
| * - MGSTA.CCNT is not supported |
| * - MPCNT, DMARFS are not implemented |
| */ |
| |
| #include "qemu/osdep.h" |
| |
| /* For crc32 */ |
| #include <zlib.h> |
| |
| #include "hw/irq.h" |
| #include "hw/qdev-clock.h" |
| #include "hw/qdev-properties.h" |
| #include "hw/net/npcm7xx_emc.h" |
| #include "net/eth.h" |
| #include "migration/vmstate.h" |
| #include "qemu/bitops.h" |
| #include "qemu/error-report.h" |
| #include "qemu/log.h" |
| #include "qemu/module.h" |
| #include "qemu/units.h" |
| #include "sysemu/dma.h" |
| #include "trace.h" |
| |
| #define CRC_LENGTH 4 |
| |
| /* |
| * The maximum size of a (layer 2) ethernet frame as defined by 802.3. |
| * 1518 = 6(dest macaddr) + 6(src macaddr) + 2(proto) + 4(crc) + 1500(payload) |
| * This does not include an additional 4 for the vlan field (802.1q). |
| */ |
| #define MAX_ETH_FRAME_SIZE 1518 |
| |
| static const char *emc_reg_name(int regno) |
| { |
| #define REG(name) case REG_ ## name: return #name; |
| switch (regno) { |
| REG(CAMCMR) |
| REG(CAMEN) |
| REG(TXDLSA) |
| REG(RXDLSA) |
| REG(MCMDR) |
| REG(MIID) |
| REG(MIIDA) |
| REG(FFTCR) |
| REG(TSDR) |
| REG(RSDR) |
| REG(DMARFC) |
| REG(MIEN) |
| REG(MISTA) |
| REG(MGSTA) |
| REG(MPCNT) |
| REG(MRPC) |
| REG(MRPCC) |
| REG(MREPC) |
| REG(DMARFS) |
| REG(CTXDSA) |
| REG(CTXBSA) |
| REG(CRXDSA) |
| REG(CRXBSA) |
| case REG_CAMM_BASE + 0: return "CAM0M"; |
| case REG_CAML_BASE + 0: return "CAM0L"; |
| case REG_CAMM_BASE + 2 ... REG_CAMML_LAST: |
| /* Only CAM0 is supported, fold the others into something simple. */ |
| if (regno & 1) { |
| return "CAM<n>L"; |
| } else { |
| return "CAM<n>M"; |
| } |
| default: return "UNKNOWN"; |
| } |
| #undef REG |
| } |
| |
| static void emc_reset(NPCM7xxEMCState *emc) |
| { |
| uint32_t value; |
| |
| trace_npcm7xx_emc_reset(emc->emc_num); |
| |
| memset(&emc->regs[0], 0, sizeof(emc->regs)); |
| |
| /* These regs have non-zero reset values. */ |
| emc->regs[REG_TXDLSA] = 0xfffffffc; |
| emc->regs[REG_RXDLSA] = 0xfffffffc; |
| emc->regs[REG_MIIDA] = 0x00900000; |
| emc->regs[REG_FFTCR] = 0x0101; |
| emc->regs[REG_DMARFC] = 0x0800; |
| emc->regs[REG_MPCNT] = 0x7fff; |
| |
| emc->tx_active = false; |
| emc->rx_active = false; |
| |
| /* Set the MAC address in the register space. */ |
| value = (emc->conf.macaddr.a[0] << 24) | |
| (emc->conf.macaddr.a[1] << 16) | |
| (emc->conf.macaddr.a[2] << 8) | |
| emc->conf.macaddr.a[3]; |
| emc->regs[REG_CAMM_BASE] = value; |
| |
| value = (emc->conf.macaddr.a[4] << 24) | (emc->conf.macaddr.a[5] << 16); |
| emc->regs[REG_CAML_BASE] = value; |
| } |
| |
| static void npcm7xx_emc_reset(DeviceState *dev) |
| { |
| NPCM7xxEMCState *emc = NPCM7XX_EMC(dev); |
| emc_reset(emc); |
| } |
| |
| static void emc_soft_reset(NPCM7xxEMCState *emc) |
| { |
| /* |
| * The docs say at least MCMDR.{LBK,OPMOD} bits are not changed during a |
| * soft reset, but does not go into further detail. For now, KISS. |
| */ |
| uint32_t mcmdr = emc->regs[REG_MCMDR]; |
| emc_reset(emc); |
| emc->regs[REG_MCMDR] = mcmdr & (REG_MCMDR_LBK | REG_MCMDR_OPMOD); |
| |
| qemu_set_irq(emc->tx_irq, 0); |
| qemu_set_irq(emc->rx_irq, 0); |
| } |
| |
| static void emc_set_link(NetClientState *nc) |
| { |
| /* Nothing to do yet. */ |
| } |
| |
| /* MISTA.TXINTR is the union of the individual bits with their enables. */ |
| static void emc_update_mista_txintr(NPCM7xxEMCState *emc) |
| { |
| /* Only look at the bits we support. */ |
| uint32_t mask = (REG_MISTA_TXBERR | |
| REG_MISTA_TDU | |
| REG_MISTA_TXCP); |
| if (emc->regs[REG_MISTA] & emc->regs[REG_MIEN] & mask) { |
| emc->regs[REG_MISTA] |= REG_MISTA_TXINTR; |
| } else { |
| emc->regs[REG_MISTA] &= ~REG_MISTA_TXINTR; |
| } |
| } |
| |
| /* MISTA.RXINTR is the union of the individual bits with their enables. */ |
| static void emc_update_mista_rxintr(NPCM7xxEMCState *emc) |
| { |
| /* Only look at the bits we support. */ |
| uint32_t mask = (REG_MISTA_RXBERR | |
| REG_MISTA_RDU | |
| REG_MISTA_RXGD); |
| if (emc->regs[REG_MISTA] & emc->regs[REG_MIEN] & mask) { |
| emc->regs[REG_MISTA] |= REG_MISTA_RXINTR; |
| } else { |
| emc->regs[REG_MISTA] &= ~REG_MISTA_RXINTR; |
| } |
| } |
| |
| /* N.B. emc_update_mista_txintr must have already been called. */ |
| static void emc_update_tx_irq(NPCM7xxEMCState *emc) |
| { |
| int level = !!(emc->regs[REG_MISTA] & |
| emc->regs[REG_MIEN] & |
| REG_MISTA_TXINTR); |
| trace_npcm7xx_emc_update_tx_irq(level); |
| qemu_set_irq(emc->tx_irq, level); |
| } |
| |
| /* N.B. emc_update_mista_rxintr must have already been called. */ |
| static void emc_update_rx_irq(NPCM7xxEMCState *emc) |
| { |
| int level = !!(emc->regs[REG_MISTA] & |
| emc->regs[REG_MIEN] & |
| REG_MISTA_RXINTR); |
| trace_npcm7xx_emc_update_rx_irq(level); |
| qemu_set_irq(emc->rx_irq, level); |
| } |
| |
| /* Update IRQ states due to changes in MIEN,MISTA. */ |
| static void emc_update_irq_from_reg_change(NPCM7xxEMCState *emc) |
| { |
| emc_update_mista_txintr(emc); |
| emc_update_tx_irq(emc); |
| |
| emc_update_mista_rxintr(emc); |
| emc_update_rx_irq(emc); |
| } |
| |
| static int emc_read_tx_desc(dma_addr_t addr, NPCM7xxEMCTxDesc *desc) |
| { |
| if (dma_memory_read(&address_space_memory, addr, desc, |
| sizeof(*desc), MEMTXATTRS_UNSPECIFIED)) { |
| qemu_log_mask(LOG_GUEST_ERROR, "%s: Failed to read descriptor @ 0x%" |
| HWADDR_PRIx "\n", __func__, addr); |
| return -1; |
| } |
| desc->flags = le32_to_cpu(desc->flags); |
| desc->txbsa = le32_to_cpu(desc->txbsa); |
| desc->status_and_length = le32_to_cpu(desc->status_and_length); |
| desc->ntxdsa = le32_to_cpu(desc->ntxdsa); |
| return 0; |
| } |
| |
| static int emc_write_tx_desc(const NPCM7xxEMCTxDesc *desc, dma_addr_t addr) |
| { |
| NPCM7xxEMCTxDesc le_desc; |
| |
| le_desc.flags = cpu_to_le32(desc->flags); |
| le_desc.txbsa = cpu_to_le32(desc->txbsa); |
| le_desc.status_and_length = cpu_to_le32(desc->status_and_length); |
| le_desc.ntxdsa = cpu_to_le32(desc->ntxdsa); |
| if (dma_memory_write(&address_space_memory, addr, &le_desc, |
| sizeof(le_desc), MEMTXATTRS_UNSPECIFIED)) { |
| qemu_log_mask(LOG_GUEST_ERROR, "%s: Failed to write descriptor @ 0x%" |
| HWADDR_PRIx "\n", __func__, addr); |
| return -1; |
| } |
| return 0; |
| } |
| |
| static int emc_read_rx_desc(dma_addr_t addr, NPCM7xxEMCRxDesc *desc) |
| { |
| if (dma_memory_read(&address_space_memory, addr, desc, |
| sizeof(*desc), MEMTXATTRS_UNSPECIFIED)) { |
| qemu_log_mask(LOG_GUEST_ERROR, "%s: Failed to read descriptor @ 0x%" |
| HWADDR_PRIx "\n", __func__, addr); |
| return -1; |
| } |
| desc->status_and_length = le32_to_cpu(desc->status_and_length); |
| desc->rxbsa = le32_to_cpu(desc->rxbsa); |
| desc->reserved = le32_to_cpu(desc->reserved); |
| desc->nrxdsa = le32_to_cpu(desc->nrxdsa); |
| return 0; |
| } |
| |
| static int emc_write_rx_desc(const NPCM7xxEMCRxDesc *desc, dma_addr_t addr) |
| { |
| NPCM7xxEMCRxDesc le_desc; |
| |
| le_desc.status_and_length = cpu_to_le32(desc->status_and_length); |
| le_desc.rxbsa = cpu_to_le32(desc->rxbsa); |
| le_desc.reserved = cpu_to_le32(desc->reserved); |
| le_desc.nrxdsa = cpu_to_le32(desc->nrxdsa); |
| if (dma_memory_write(&address_space_memory, addr, &le_desc, |
| sizeof(le_desc), MEMTXATTRS_UNSPECIFIED)) { |
| qemu_log_mask(LOG_GUEST_ERROR, "%s: Failed to write descriptor @ 0x%" |
| HWADDR_PRIx "\n", __func__, addr); |
| return -1; |
| } |
| return 0; |
| } |
| |
| static void emc_set_mista(NPCM7xxEMCState *emc, uint32_t flags) |
| { |
| trace_npcm7xx_emc_set_mista(flags); |
| emc->regs[REG_MISTA] |= flags; |
| if (extract32(flags, 16, 16)) { |
| emc_update_mista_txintr(emc); |
| } |
| if (extract32(flags, 0, 16)) { |
| emc_update_mista_rxintr(emc); |
| } |
| } |
| |
| static void emc_halt_tx(NPCM7xxEMCState *emc, uint32_t mista_flag) |
| { |
| emc->tx_active = false; |
| emc_set_mista(emc, mista_flag); |
| } |
| |
| static void emc_halt_rx(NPCM7xxEMCState *emc, uint32_t mista_flag) |
| { |
| emc->rx_active = false; |
| emc_set_mista(emc, mista_flag); |
| } |
| |
| static void emc_enable_rx_and_flush(NPCM7xxEMCState *emc) |
| { |
| emc->rx_active = true; |
| qemu_flush_queued_packets(qemu_get_queue(emc->nic)); |
| } |
| |
| static void emc_set_next_tx_descriptor(NPCM7xxEMCState *emc, |
| const NPCM7xxEMCTxDesc *tx_desc, |
| uint32_t desc_addr) |
| { |
| /* Update the current descriptor, if only to reset the owner flag. */ |
| if (emc_write_tx_desc(tx_desc, desc_addr)) { |
| /* |
| * We just read it so this shouldn't generally happen. |
| * Error already reported. |
| */ |
| emc_set_mista(emc, REG_MISTA_TXBERR); |
| } |
| emc->regs[REG_CTXDSA] = TX_DESC_NTXDSA(tx_desc->ntxdsa); |
| } |
| |
| static void emc_set_next_rx_descriptor(NPCM7xxEMCState *emc, |
| const NPCM7xxEMCRxDesc *rx_desc, |
| uint32_t desc_addr) |
| { |
| /* Update the current descriptor, if only to reset the owner flag. */ |
| if (emc_write_rx_desc(rx_desc, desc_addr)) { |
| /* |
| * We just read it so this shouldn't generally happen. |
| * Error already reported. |
| */ |
| emc_set_mista(emc, REG_MISTA_RXBERR); |
| } |
| emc->regs[REG_CRXDSA] = RX_DESC_NRXDSA(rx_desc->nrxdsa); |
| } |
| |
| static void emc_try_send_next_packet(NPCM7xxEMCState *emc) |
| { |
| /* Working buffer for sending out packets. Most packets fit in this. */ |
| #define TX_BUFFER_SIZE 2048 |
| uint8_t tx_send_buffer[TX_BUFFER_SIZE]; |
| uint32_t desc_addr = TX_DESC_NTXDSA(emc->regs[REG_CTXDSA]); |
| NPCM7xxEMCTxDesc tx_desc; |
| uint32_t next_buf_addr, length; |
| uint8_t *buf; |
| g_autofree uint8_t *malloced_buf = NULL; |
| |
| if (emc_read_tx_desc(desc_addr, &tx_desc)) { |
| /* Error reading descriptor, already reported. */ |
| emc_halt_tx(emc, REG_MISTA_TXBERR); |
| emc_update_tx_irq(emc); |
| return; |
| } |
| |
| /* Nothing we can do if we don't own the descriptor. */ |
| if (!(tx_desc.flags & TX_DESC_FLAG_OWNER_MASK)) { |
| trace_npcm7xx_emc_cpu_owned_desc(desc_addr); |
| emc_halt_tx(emc, REG_MISTA_TDU); |
| emc_update_tx_irq(emc); |
| return; |
| } |
| |
| /* Give the descriptor back regardless of what happens. */ |
| tx_desc.flags &= ~TX_DESC_FLAG_OWNER_MASK; |
| tx_desc.status_and_length &= 0xffff; |
| |
| /* |
| * Despite the h/w documentation saying the tx buffer is word aligned, |
| * the linux driver does not word align the buffer. There is value in not |
| * aligning the buffer: See the description of NET_IP_ALIGN in linux |
| * kernel sources. |
| */ |
| next_buf_addr = tx_desc.txbsa; |
| emc->regs[REG_CTXBSA] = next_buf_addr; |
| length = TX_DESC_PKT_LEN(tx_desc.status_and_length); |
| buf = &tx_send_buffer[0]; |
| |
| if (length > sizeof(tx_send_buffer)) { |
| malloced_buf = g_malloc(length); |
| buf = malloced_buf; |
| } |
| |
| if (dma_memory_read(&address_space_memory, next_buf_addr, buf, |
| length, MEMTXATTRS_UNSPECIFIED)) { |
| qemu_log_mask(LOG_GUEST_ERROR, "%s: Failed to read packet @ 0x%x\n", |
| __func__, next_buf_addr); |
| emc_set_mista(emc, REG_MISTA_TXBERR); |
| emc_set_next_tx_descriptor(emc, &tx_desc, desc_addr); |
| emc_update_tx_irq(emc); |
| trace_npcm7xx_emc_tx_done(emc->regs[REG_CTXDSA]); |
| return; |
| } |
| |
| if ((tx_desc.flags & TX_DESC_FLAG_PADEN) && (length < MIN_PACKET_LENGTH)) { |
| memset(buf + length, 0, MIN_PACKET_LENGTH - length); |
| length = MIN_PACKET_LENGTH; |
| } |
| |
| /* N.B. emc_receive can get called here. */ |
| qemu_send_packet(qemu_get_queue(emc->nic), buf, length); |
| trace_npcm7xx_emc_sent_packet(length); |
| |
| tx_desc.status_and_length |= TX_DESC_STATUS_TXCP; |
| if (tx_desc.flags & TX_DESC_FLAG_INTEN) { |
| emc_set_mista(emc, REG_MISTA_TXCP); |
| } |
| if (emc->regs[REG_MISTA] & emc->regs[REG_MIEN] & REG_MISTA_TXINTR) { |
| tx_desc.status_and_length |= TX_DESC_STATUS_TXINTR; |
| } |
| |
| emc_set_next_tx_descriptor(emc, &tx_desc, desc_addr); |
| emc_update_tx_irq(emc); |
| trace_npcm7xx_emc_tx_done(emc->regs[REG_CTXDSA]); |
| } |
| |
| static bool emc_can_receive(NetClientState *nc) |
| { |
| NPCM7xxEMCState *emc = NPCM7XX_EMC(qemu_get_nic_opaque(nc)); |
| |
| bool can_receive = emc->rx_active; |
| trace_npcm7xx_emc_can_receive(can_receive); |
| return can_receive; |
| } |
| |
| /* If result is false then *fail_reason contains the reason. */ |
| static bool emc_receive_filter1(NPCM7xxEMCState *emc, const uint8_t *buf, |
| size_t len, const char **fail_reason) |
| { |
| eth_pkt_types_e pkt_type = get_eth_packet_type(PKT_GET_ETH_HDR(buf)); |
| |
| switch (pkt_type) { |
| case ETH_PKT_BCAST: |
| if (emc->regs[REG_CAMCMR] & REG_CAMCMR_CCAM) { |
| return true; |
| } else { |
| *fail_reason = "Broadcast packet disabled"; |
| return !!(emc->regs[REG_CAMCMR] & REG_CAMCMR_ABP); |
| } |
| case ETH_PKT_MCAST: |
| if (emc->regs[REG_CAMCMR] & REG_CAMCMR_CCAM) { |
| return true; |
| } else { |
| *fail_reason = "Multicast packet disabled"; |
| return !!(emc->regs[REG_CAMCMR] & REG_CAMCMR_AMP); |
| } |
| case ETH_PKT_UCAST: { |
| bool matches; |
| uint32_t value; |
| struct MACAddr mac; |
| if (emc->regs[REG_CAMCMR] & REG_CAMCMR_AUP) { |
| return true; |
| } |
| |
| value = emc->regs[REG_CAMM_BASE]; |
| mac.a[0] = value >> 24; |
| mac.a[1] = value >> 16; |
| mac.a[2] = value >> 8; |
| mac.a[3] = value >> 0; |
| value = emc->regs[REG_CAML_BASE]; |
| mac.a[4] = value >> 24; |
| mac.a[5] = value >> 16; |
| |
| matches = ((emc->regs[REG_CAMCMR] & REG_CAMCMR_ECMP) && |
| /* We only support one CAM register, CAM0. */ |
| (emc->regs[REG_CAMEN] & (1 << 0)) && |
| memcmp(buf, mac.a, ETH_ALEN) == 0); |
| if (emc->regs[REG_CAMCMR] & REG_CAMCMR_CCAM) { |
| *fail_reason = "MACADDR matched, comparison complemented"; |
| return !matches; |
| } else { |
| *fail_reason = "MACADDR didn't match"; |
| return matches; |
| } |
| } |
| default: |
| g_assert_not_reached(); |
| } |
| } |
| |
| static bool emc_receive_filter(NPCM7xxEMCState *emc, const uint8_t *buf, |
| size_t len) |
| { |
| const char *fail_reason = NULL; |
| bool ok = emc_receive_filter1(emc, buf, len, &fail_reason); |
| if (!ok) { |
| trace_npcm7xx_emc_packet_filtered_out(fail_reason); |
| } |
| return ok; |
| } |
| |
| static ssize_t emc_receive(NetClientState *nc, const uint8_t *buf, size_t len1) |
| { |
| NPCM7xxEMCState *emc = NPCM7XX_EMC(qemu_get_nic_opaque(nc)); |
| const uint32_t len = len1; |
| size_t max_frame_len; |
| bool long_frame; |
| uint32_t desc_addr; |
| NPCM7xxEMCRxDesc rx_desc; |
| uint32_t crc; |
| uint8_t *crc_ptr; |
| uint32_t buf_addr; |
| |
| trace_npcm7xx_emc_receiving_packet(len); |
| |
| if (!emc_can_receive(nc)) { |
| qemu_log_mask(LOG_GUEST_ERROR, "%s: Unexpected packet\n", __func__); |
| return -1; |
| } |
| |
| if (len < ETH_HLEN || |
| /* Defensive programming: drop unsupportable large packets. */ |
| len > 0xffff - CRC_LENGTH) { |
| qemu_log_mask(LOG_GUEST_ERROR, "%s: Dropped frame of %u bytes\n", |
| __func__, len); |
| return len; |
| } |
| |
| /* |
| * DENI is set if EMC received the Length/Type field of the incoming |
| * packet, so it will be set regardless of what happens next. |
| */ |
| emc_set_mista(emc, REG_MISTA_DENI); |
| |
| if (!emc_receive_filter(emc, buf, len)) { |
| emc_update_rx_irq(emc); |
| return len; |
| } |
| |
| /* Huge frames (> DMARFC) are dropped. */ |
| max_frame_len = REG_DMARFC_RXMS(emc->regs[REG_DMARFC]); |
| if (len + CRC_LENGTH > max_frame_len) { |
| trace_npcm7xx_emc_packet_dropped(len); |
| emc_set_mista(emc, REG_MISTA_DFOI); |
| emc_update_rx_irq(emc); |
| return len; |
| } |
| |
| /* |
| * Long Frames (> MAX_ETH_FRAME_SIZE) are also dropped, unless MCMDR.ALP |
| * is set. |
| */ |
| long_frame = false; |
| if (len + CRC_LENGTH > MAX_ETH_FRAME_SIZE) { |
| if (emc->regs[REG_MCMDR] & REG_MCMDR_ALP) { |
| long_frame = true; |
| } else { |
| trace_npcm7xx_emc_packet_dropped(len); |
| emc_set_mista(emc, REG_MISTA_PTLE); |
| emc_update_rx_irq(emc); |
| return len; |
| } |
| } |
| |
| desc_addr = RX_DESC_NRXDSA(emc->regs[REG_CRXDSA]); |
| if (emc_read_rx_desc(desc_addr, &rx_desc)) { |
| /* Error reading descriptor, already reported. */ |
| emc_halt_rx(emc, REG_MISTA_RXBERR); |
| emc_update_rx_irq(emc); |
| return len; |
| } |
| |
| /* Nothing we can do if we don't own the descriptor. */ |
| if (!(rx_desc.status_and_length & RX_DESC_STATUS_OWNER_MASK)) { |
| trace_npcm7xx_emc_cpu_owned_desc(desc_addr); |
| emc_halt_rx(emc, REG_MISTA_RDU); |
| emc_update_rx_irq(emc); |
| return len; |
| } |
| |
| crc = 0; |
| crc_ptr = (uint8_t *) &crc; |
| if (!(emc->regs[REG_MCMDR] & REG_MCMDR_SPCRC)) { |
| crc = cpu_to_be32(crc32(~0, buf, len)); |
| } |
| |
| /* Give the descriptor back regardless of what happens. */ |
| rx_desc.status_and_length &= ~RX_DESC_STATUS_OWNER_MASK; |
| |
| buf_addr = rx_desc.rxbsa; |
| emc->regs[REG_CRXBSA] = buf_addr; |
| if (dma_memory_write(&address_space_memory, buf_addr, buf, |
| len, MEMTXATTRS_UNSPECIFIED) || |
| (!(emc->regs[REG_MCMDR] & REG_MCMDR_SPCRC) && |
| dma_memory_write(&address_space_memory, buf_addr + len, |
| crc_ptr, 4, MEMTXATTRS_UNSPECIFIED))) { |
| qemu_log_mask(LOG_GUEST_ERROR, "%s: Bus error writing packet\n", |
| __func__); |
| emc_set_mista(emc, REG_MISTA_RXBERR); |
| emc_set_next_rx_descriptor(emc, &rx_desc, desc_addr); |
| emc_update_rx_irq(emc); |
| trace_npcm7xx_emc_rx_done(emc->regs[REG_CRXDSA]); |
| return len; |
| } |
| |
| trace_npcm7xx_emc_received_packet(len); |
| |
| /* Note: We've already verified len+4 <= 0xffff. */ |
| rx_desc.status_and_length = len; |
| if (!(emc->regs[REG_MCMDR] & REG_MCMDR_SPCRC)) { |
| rx_desc.status_and_length += 4; |
| } |
| rx_desc.status_and_length |= RX_DESC_STATUS_RXGD; |
| emc_set_mista(emc, REG_MISTA_RXGD); |
| |
| if (emc->regs[REG_MISTA] & emc->regs[REG_MIEN] & REG_MISTA_RXINTR) { |
| rx_desc.status_and_length |= RX_DESC_STATUS_RXINTR; |
| } |
| if (long_frame) { |
| rx_desc.status_and_length |= RX_DESC_STATUS_PTLE; |
| } |
| |
| emc_set_next_rx_descriptor(emc, &rx_desc, desc_addr); |
| emc_update_rx_irq(emc); |
| trace_npcm7xx_emc_rx_done(emc->regs[REG_CRXDSA]); |
| return len; |
| } |
| |
| static uint64_t npcm7xx_emc_read(void *opaque, hwaddr offset, unsigned size) |
| { |
| NPCM7xxEMCState *emc = opaque; |
| uint32_t reg = offset / sizeof(uint32_t); |
| uint32_t result; |
| |
| if (reg >= NPCM7XX_NUM_EMC_REGS) { |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "%s: Invalid offset 0x%04" HWADDR_PRIx "\n", |
| __func__, offset); |
| return 0; |
| } |
| |
| switch (reg) { |
| case REG_MIID: |
| /* |
| * We don't implement MII. For determinism, always return zero as |
| * writes record the last value written for debugging purposes. |
| */ |
| qemu_log_mask(LOG_UNIMP, "%s: Read of MIID, returning 0\n", __func__); |
| result = 0; |
| break; |
| case REG_TSDR: |
| case REG_RSDR: |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "%s: Read of write-only reg, %s/%d\n", |
| __func__, emc_reg_name(reg), reg); |
| return 0; |
| default: |
| result = emc->regs[reg]; |
| break; |
| } |
| |
| trace_npcm7xx_emc_reg_read(emc->emc_num, result, emc_reg_name(reg), reg); |
| return result; |
| } |
| |
| static void npcm7xx_emc_write(void *opaque, hwaddr offset, |
| uint64_t v, unsigned size) |
| { |
| NPCM7xxEMCState *emc = opaque; |
| uint32_t reg = offset / sizeof(uint32_t); |
| uint32_t value = v; |
| |
| g_assert(size == sizeof(uint32_t)); |
| |
| if (reg >= NPCM7XX_NUM_EMC_REGS) { |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "%s: Invalid offset 0x%04" HWADDR_PRIx "\n", |
| __func__, offset); |
| return; |
| } |
| |
| trace_npcm7xx_emc_reg_write(emc->emc_num, emc_reg_name(reg), reg, value); |
| |
| switch (reg) { |
| case REG_CAMCMR: |
| emc->regs[reg] = value; |
| break; |
| case REG_CAMEN: |
| /* Only CAM0 is supported, don't pretend otherwise. */ |
| if (value & ~1) { |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "%s: Only CAM0 is supported, cannot enable others" |
| ": 0x%x\n", |
| __func__, value); |
| } |
| emc->regs[reg] = value & 1; |
| break; |
| case REG_CAMM_BASE + 0: |
| emc->regs[reg] = value; |
| break; |
| case REG_CAML_BASE + 0: |
| emc->regs[reg] = value; |
| break; |
| case REG_MCMDR: { |
| uint32_t prev; |
| if (value & REG_MCMDR_SWR) { |
| emc_soft_reset(emc); |
| /* On h/w the reset happens over multiple cycles. For now KISS. */ |
| break; |
| } |
| prev = emc->regs[reg]; |
| emc->regs[reg] = value; |
| /* Update tx state. */ |
| if (!(prev & REG_MCMDR_TXON) && |
| (value & REG_MCMDR_TXON)) { |
| emc->regs[REG_CTXDSA] = emc->regs[REG_TXDLSA]; |
| /* |
| * Linux kernel turns TX on with CPU still holding descriptor, |
| * which suggests we should wait for a write to TSDR before trying |
| * to send a packet: so we don't send one here. |
| */ |
| } else if ((prev & REG_MCMDR_TXON) && |
| !(value & REG_MCMDR_TXON)) { |
| emc->regs[REG_MGSTA] |= REG_MGSTA_TXHA; |
| } |
| if (!(value & REG_MCMDR_TXON)) { |
| emc_halt_tx(emc, 0); |
| } |
| /* Update rx state. */ |
| if (!(prev & REG_MCMDR_RXON) && |
| (value & REG_MCMDR_RXON)) { |
| emc->regs[REG_CRXDSA] = emc->regs[REG_RXDLSA]; |
| } else if ((prev & REG_MCMDR_RXON) && |
| !(value & REG_MCMDR_RXON)) { |
| emc->regs[REG_MGSTA] |= REG_MGSTA_RXHA; |
| } |
| if (value & REG_MCMDR_RXON) { |
| emc_enable_rx_and_flush(emc); |
| } else { |
| emc_halt_rx(emc, 0); |
| } |
| break; |
| } |
| case REG_TXDLSA: |
| case REG_RXDLSA: |
| case REG_DMARFC: |
| case REG_MIID: |
| emc->regs[reg] = value; |
| break; |
| case REG_MIEN: |
| emc->regs[reg] = value; |
| emc_update_irq_from_reg_change(emc); |
| break; |
| case REG_MISTA: |
| /* Clear the bits that have 1 in "value". */ |
| emc->regs[reg] &= ~value; |
| emc_update_irq_from_reg_change(emc); |
| break; |
| case REG_MGSTA: |
| /* Clear the bits that have 1 in "value". */ |
| emc->regs[reg] &= ~value; |
| break; |
| case REG_TSDR: |
| if (emc->regs[REG_MCMDR] & REG_MCMDR_TXON) { |
| emc->tx_active = true; |
| /* Keep trying to send packets until we run out. */ |
| while (emc->tx_active) { |
| emc_try_send_next_packet(emc); |
| } |
| } |
| break; |
| case REG_RSDR: |
| if (emc->regs[REG_MCMDR] & REG_MCMDR_RXON) { |
| emc_enable_rx_and_flush(emc); |
| } |
| break; |
| case REG_MIIDA: |
| emc->regs[reg] = value & ~REG_MIIDA_BUSY; |
| break; |
| case REG_MRPC: |
| case REG_MRPCC: |
| case REG_MREPC: |
| case REG_CTXDSA: |
| case REG_CTXBSA: |
| case REG_CRXDSA: |
| case REG_CRXBSA: |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "%s: Write to read-only reg %s/%d\n", |
| __func__, emc_reg_name(reg), reg); |
| break; |
| default: |
| qemu_log_mask(LOG_UNIMP, "%s: Write to unimplemented reg %s/%d\n", |
| __func__, emc_reg_name(reg), reg); |
| break; |
| } |
| } |
| |
| static const struct MemoryRegionOps npcm7xx_emc_ops = { |
| .read = npcm7xx_emc_read, |
| .write = npcm7xx_emc_write, |
| .endianness = DEVICE_LITTLE_ENDIAN, |
| .valid = { |
| .min_access_size = 4, |
| .max_access_size = 4, |
| .unaligned = false, |
| }, |
| }; |
| |
| static void emc_cleanup(NetClientState *nc) |
| { |
| /* Nothing to do yet. */ |
| } |
| |
| static NetClientInfo net_npcm7xx_emc_info = { |
| .type = NET_CLIENT_DRIVER_NIC, |
| .size = sizeof(NICState), |
| .can_receive = emc_can_receive, |
| .receive = emc_receive, |
| .cleanup = emc_cleanup, |
| .link_status_changed = emc_set_link, |
| }; |
| |
| static void npcm7xx_emc_realize(DeviceState *dev, Error **errp) |
| { |
| NPCM7xxEMCState *emc = NPCM7XX_EMC(dev); |
| SysBusDevice *sbd = SYS_BUS_DEVICE(emc); |
| |
| memory_region_init_io(&emc->iomem, OBJECT(emc), &npcm7xx_emc_ops, emc, |
| TYPE_NPCM7XX_EMC, 4 * KiB); |
| sysbus_init_mmio(sbd, &emc->iomem); |
| sysbus_init_irq(sbd, &emc->tx_irq); |
| sysbus_init_irq(sbd, &emc->rx_irq); |
| |
| qemu_macaddr_default_if_unset(&emc->conf.macaddr); |
| emc->nic = qemu_new_nic(&net_npcm7xx_emc_info, &emc->conf, |
| object_get_typename(OBJECT(dev)), dev->id, |
| &dev->mem_reentrancy_guard, emc); |
| qemu_format_nic_info_str(qemu_get_queue(emc->nic), emc->conf.macaddr.a); |
| } |
| |
| static void npcm7xx_emc_unrealize(DeviceState *dev) |
| { |
| NPCM7xxEMCState *emc = NPCM7XX_EMC(dev); |
| |
| qemu_del_nic(emc->nic); |
| } |
| |
| static const VMStateDescription vmstate_npcm7xx_emc = { |
| .name = TYPE_NPCM7XX_EMC, |
| .version_id = 0, |
| .minimum_version_id = 0, |
| .fields = (const VMStateField[]) { |
| VMSTATE_UINT8(emc_num, NPCM7xxEMCState), |
| VMSTATE_UINT32_ARRAY(regs, NPCM7xxEMCState, NPCM7XX_NUM_EMC_REGS), |
| VMSTATE_BOOL(tx_active, NPCM7xxEMCState), |
| VMSTATE_BOOL(rx_active, NPCM7xxEMCState), |
| VMSTATE_END_OF_LIST(), |
| }, |
| }; |
| |
| static Property npcm7xx_emc_properties[] = { |
| DEFINE_NIC_PROPERTIES(NPCM7xxEMCState, conf), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void npcm7xx_emc_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| |
| set_bit(DEVICE_CATEGORY_NETWORK, dc->categories); |
| dc->desc = "NPCM7xx EMC Controller"; |
| dc->realize = npcm7xx_emc_realize; |
| dc->unrealize = npcm7xx_emc_unrealize; |
| dc->reset = npcm7xx_emc_reset; |
| dc->vmsd = &vmstate_npcm7xx_emc; |
| device_class_set_props(dc, npcm7xx_emc_properties); |
| } |
| |
| static const TypeInfo npcm7xx_emc_info = { |
| .name = TYPE_NPCM7XX_EMC, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(NPCM7xxEMCState), |
| .class_init = npcm7xx_emc_class_init, |
| }; |
| |
| static void npcm7xx_emc_register_type(void) |
| { |
| type_register_static(&npcm7xx_emc_info); |
| } |
| |
| type_init(npcm7xx_emc_register_type) |