| |
| /* |
| * QEMU model of the Milkymist VGA framebuffer. |
| * |
| * Copyright (c) 2010 Michael Walle <michael@walle.cc> |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Lesser General Public |
| * License as published by the Free Software Foundation; either |
| * version 2 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Lesser General Public License for more details. |
| * |
| * You should have received a copy of the GNU Lesser General Public |
| * License along with this library; if not, see <http://www.gnu.org/licenses/>. |
| * |
| * |
| * Specification available at: |
| * http://www.milkymist.org/socdoc/vgafb.pdf |
| */ |
| |
| #include "hw.h" |
| #include "sysbus.h" |
| #include "trace.h" |
| #include "console.h" |
| #include "framebuffer.h" |
| #include "pixel_ops.h" |
| #include "qemu-error.h" |
| |
| #define BITS 8 |
| #include "milkymist-vgafb_template.h" |
| #define BITS 15 |
| #include "milkymist-vgafb_template.h" |
| #define BITS 16 |
| #include "milkymist-vgafb_template.h" |
| #define BITS 24 |
| #include "milkymist-vgafb_template.h" |
| #define BITS 32 |
| #include "milkymist-vgafb_template.h" |
| |
| enum { |
| R_CTRL = 0, |
| R_HRES, |
| R_HSYNC_START, |
| R_HSYNC_END, |
| R_HSCAN, |
| R_VRES, |
| R_VSYNC_START, |
| R_VSYNC_END, |
| R_VSCAN, |
| R_BASEADDRESS, |
| R_BASEADDRESS_ACT, |
| R_BURST_COUNT, |
| R_SOURCE_CLOCK, |
| R_MAX |
| }; |
| |
| enum { |
| CTRL_RESET = (1<<0), |
| }; |
| |
| struct MilkymistVgafbState { |
| SysBusDevice busdev; |
| MemoryRegion regs_region; |
| DisplayState *ds; |
| |
| int invalidate; |
| uint32_t fb_offset; |
| uint32_t fb_mask; |
| |
| uint32_t regs[R_MAX]; |
| }; |
| typedef struct MilkymistVgafbState MilkymistVgafbState; |
| |
| static int vgafb_enabled(MilkymistVgafbState *s) |
| { |
| return !(s->regs[R_CTRL] & CTRL_RESET); |
| } |
| |
| static void vgafb_update_display(void *opaque) |
| { |
| MilkymistVgafbState *s = opaque; |
| int first = 0; |
| int last = 0; |
| drawfn fn; |
| |
| if (!vgafb_enabled(s)) { |
| return; |
| } |
| |
| int dest_width = s->regs[R_HRES]; |
| |
| switch (ds_get_bits_per_pixel(s->ds)) { |
| case 0: |
| return; |
| case 8: |
| fn = draw_line_8; |
| break; |
| case 15: |
| fn = draw_line_15; |
| dest_width *= 2; |
| break; |
| case 16: |
| fn = draw_line_16; |
| dest_width *= 2; |
| break; |
| case 24: |
| fn = draw_line_24; |
| dest_width *= 3; |
| break; |
| case 32: |
| fn = draw_line_32; |
| dest_width *= 4; |
| break; |
| default: |
| hw_error("milkymist_vgafb: bad color depth\n"); |
| break; |
| } |
| |
| framebuffer_update_display(s->ds, sysbus_address_space(&s->busdev), |
| s->regs[R_BASEADDRESS] + s->fb_offset, |
| s->regs[R_HRES], |
| s->regs[R_VRES], |
| s->regs[R_HRES] * 2, |
| dest_width, |
| 0, |
| s->invalidate, |
| fn, |
| NULL, |
| &first, &last); |
| |
| if (first >= 0) { |
| dpy_update(s->ds, 0, first, s->regs[R_HRES], last - first + 1); |
| } |
| s->invalidate = 0; |
| } |
| |
| static void vgafb_invalidate_display(void *opaque) |
| { |
| MilkymistVgafbState *s = opaque; |
| s->invalidate = 1; |
| } |
| |
| static void vgafb_resize(MilkymistVgafbState *s) |
| { |
| if (!vgafb_enabled(s)) { |
| return; |
| } |
| |
| qemu_console_resize(s->ds, s->regs[R_HRES], s->regs[R_VRES]); |
| s->invalidate = 1; |
| } |
| |
| static uint64_t vgafb_read(void *opaque, target_phys_addr_t addr, |
| unsigned size) |
| { |
| MilkymistVgafbState *s = opaque; |
| uint32_t r = 0; |
| |
| addr >>= 2; |
| switch (addr) { |
| case R_CTRL: |
| case R_HRES: |
| case R_HSYNC_START: |
| case R_HSYNC_END: |
| case R_HSCAN: |
| case R_VRES: |
| case R_VSYNC_START: |
| case R_VSYNC_END: |
| case R_VSCAN: |
| case R_BASEADDRESS: |
| case R_BURST_COUNT: |
| case R_SOURCE_CLOCK: |
| r = s->regs[addr]; |
| break; |
| case R_BASEADDRESS_ACT: |
| r = s->regs[R_BASEADDRESS]; |
| break; |
| |
| default: |
| error_report("milkymist_vgafb: read access to unknown register 0x" |
| TARGET_FMT_plx, addr << 2); |
| break; |
| } |
| |
| trace_milkymist_vgafb_memory_read(addr << 2, r); |
| |
| return r; |
| } |
| |
| static void vgafb_write(void *opaque, target_phys_addr_t addr, uint64_t value, |
| unsigned size) |
| { |
| MilkymistVgafbState *s = opaque; |
| |
| trace_milkymist_vgafb_memory_write(addr, value); |
| |
| addr >>= 2; |
| switch (addr) { |
| case R_CTRL: |
| s->regs[addr] = value; |
| vgafb_resize(s); |
| break; |
| case R_HSYNC_START: |
| case R_HSYNC_END: |
| case R_HSCAN: |
| case R_VSYNC_START: |
| case R_VSYNC_END: |
| case R_VSCAN: |
| case R_BURST_COUNT: |
| case R_SOURCE_CLOCK: |
| s->regs[addr] = value; |
| break; |
| case R_BASEADDRESS: |
| if (value & 0x1f) { |
| error_report("milkymist_vgafb: framebuffer base address have to " |
| "be 32 byte aligned"); |
| break; |
| } |
| s->regs[addr] = value & s->fb_mask; |
| s->invalidate = 1; |
| break; |
| case R_HRES: |
| case R_VRES: |
| s->regs[addr] = value; |
| vgafb_resize(s); |
| break; |
| case R_BASEADDRESS_ACT: |
| error_report("milkymist_vgafb: write to read-only register 0x" |
| TARGET_FMT_plx, addr << 2); |
| break; |
| |
| default: |
| error_report("milkymist_vgafb: write access to unknown register 0x" |
| TARGET_FMT_plx, addr << 2); |
| break; |
| } |
| } |
| |
| static const MemoryRegionOps vgafb_mmio_ops = { |
| .read = vgafb_read, |
| .write = vgafb_write, |
| .valid = { |
| .min_access_size = 4, |
| .max_access_size = 4, |
| }, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static void milkymist_vgafb_reset(DeviceState *d) |
| { |
| MilkymistVgafbState *s = container_of(d, MilkymistVgafbState, busdev.qdev); |
| int i; |
| |
| for (i = 0; i < R_MAX; i++) { |
| s->regs[i] = 0; |
| } |
| |
| /* defaults */ |
| s->regs[R_CTRL] = CTRL_RESET; |
| s->regs[R_HRES] = 640; |
| s->regs[R_VRES] = 480; |
| s->regs[R_BASEADDRESS] = 0; |
| } |
| |
| static int milkymist_vgafb_init(SysBusDevice *dev) |
| { |
| MilkymistVgafbState *s = FROM_SYSBUS(typeof(*s), dev); |
| |
| memory_region_init_io(&s->regs_region, &vgafb_mmio_ops, s, |
| "milkymist-vgafb", R_MAX * 4); |
| sysbus_init_mmio(dev, &s->regs_region); |
| |
| s->ds = graphic_console_init(vgafb_update_display, |
| vgafb_invalidate_display, |
| NULL, NULL, s); |
| |
| return 0; |
| } |
| |
| static int vgafb_post_load(void *opaque, int version_id) |
| { |
| vgafb_invalidate_display(opaque); |
| return 0; |
| } |
| |
| static const VMStateDescription vmstate_milkymist_vgafb = { |
| .name = "milkymist-vgafb", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .minimum_version_id_old = 1, |
| .post_load = vgafb_post_load, |
| .fields = (VMStateField[]) { |
| VMSTATE_UINT32_ARRAY(regs, MilkymistVgafbState, R_MAX), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static SysBusDeviceInfo milkymist_vgafb_info = { |
| .init = milkymist_vgafb_init, |
| .qdev.name = "milkymist-vgafb", |
| .qdev.size = sizeof(MilkymistVgafbState), |
| .qdev.vmsd = &vmstate_milkymist_vgafb, |
| .qdev.reset = milkymist_vgafb_reset, |
| .qdev.props = (Property[]) { |
| DEFINE_PROP_UINT32("fb_offset", MilkymistVgafbState, fb_offset, 0x0), |
| DEFINE_PROP_UINT32("fb_mask", MilkymistVgafbState, fb_mask, 0xffffffff), |
| DEFINE_PROP_END_OF_LIST(), |
| } |
| }; |
| |
| static void milkymist_vgafb_register(void) |
| { |
| sysbus_register_withprop(&milkymist_vgafb_info); |
| } |
| |
| device_init(milkymist_vgafb_register) |