| /* |
| * QEMU model of the Milkymist minimac2 block. |
| * |
| * Copyright (c) 2011 Michael Walle <michael@walle.cc> |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Lesser General Public |
| * License as published by the Free Software Foundation; either |
| * version 2 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Lesser General Public License for more details. |
| * |
| * You should have received a copy of the GNU Lesser General Public |
| * License along with this library; if not, see <http://www.gnu.org/licenses/>. |
| * |
| * |
| * Specification available at: |
| * not available yet |
| * |
| */ |
| |
| #include "hw.h" |
| #include "sysbus.h" |
| #include "trace.h" |
| #include "net.h" |
| #include "qemu-error.h" |
| #include "qdev-addr.h" |
| |
| #include <zlib.h> |
| |
| enum { |
| R_SETUP = 0, |
| R_MDIO, |
| R_STATE0, |
| R_COUNT0, |
| R_STATE1, |
| R_COUNT1, |
| R_TXCOUNT, |
| R_MAX |
| }; |
| |
| enum { |
| SETUP_PHY_RST = (1<<0), |
| }; |
| |
| enum { |
| MDIO_DO = (1<<0), |
| MDIO_DI = (1<<1), |
| MDIO_OE = (1<<2), |
| MDIO_CLK = (1<<3), |
| }; |
| |
| enum { |
| STATE_EMPTY = 0, |
| STATE_LOADED = 1, |
| STATE_PENDING = 2, |
| }; |
| |
| enum { |
| MDIO_OP_WRITE = 1, |
| MDIO_OP_READ = 2, |
| }; |
| |
| enum mdio_state { |
| MDIO_STATE_IDLE, |
| MDIO_STATE_READING, |
| MDIO_STATE_WRITING, |
| }; |
| |
| enum { |
| R_PHY_ID1 = 2, |
| R_PHY_ID2 = 3, |
| R_PHY_MAX = 32 |
| }; |
| |
| #define MINIMAC2_MTU 1530 |
| #define MINIMAC2_BUFFER_SIZE 2048 |
| |
| struct MilkymistMinimac2MdioState { |
| int last_clk; |
| int count; |
| uint32_t data; |
| uint16_t data_out; |
| int state; |
| |
| uint8_t phy_addr; |
| uint8_t reg_addr; |
| }; |
| typedef struct MilkymistMinimac2MdioState MilkymistMinimac2MdioState; |
| |
| struct MilkymistMinimac2State { |
| SysBusDevice busdev; |
| NICState *nic; |
| NICConf conf; |
| char *phy_model; |
| target_phys_addr_t buffers_base; |
| MemoryRegion buffers; |
| MemoryRegion regs_region; |
| |
| qemu_irq rx_irq; |
| qemu_irq tx_irq; |
| |
| uint32_t regs[R_MAX]; |
| |
| MilkymistMinimac2MdioState mdio; |
| |
| uint16_t phy_regs[R_PHY_MAX]; |
| |
| uint8_t *rx0_buf; |
| uint8_t *rx1_buf; |
| uint8_t *tx_buf; |
| }; |
| typedef struct MilkymistMinimac2State MilkymistMinimac2State; |
| |
| static const uint8_t preamble_sfd[] = { |
| 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0xd5 |
| }; |
| |
| static void minimac2_mdio_write_reg(MilkymistMinimac2State *s, |
| uint8_t phy_addr, uint8_t reg_addr, uint16_t value) |
| { |
| trace_milkymist_minimac2_mdio_write(phy_addr, reg_addr, value); |
| |
| /* nop */ |
| } |
| |
| static uint16_t minimac2_mdio_read_reg(MilkymistMinimac2State *s, |
| uint8_t phy_addr, uint8_t reg_addr) |
| { |
| uint16_t r = s->phy_regs[reg_addr]; |
| |
| trace_milkymist_minimac2_mdio_read(phy_addr, reg_addr, r); |
| |
| return r; |
| } |
| |
| static void minimac2_update_mdio(MilkymistMinimac2State *s) |
| { |
| MilkymistMinimac2MdioState *m = &s->mdio; |
| |
| /* detect rising clk edge */ |
| if (m->last_clk == 0 && (s->regs[R_MDIO] & MDIO_CLK)) { |
| /* shift data in */ |
| int bit = ((s->regs[R_MDIO] & MDIO_DO) |
| && (s->regs[R_MDIO] & MDIO_OE)) ? 1 : 0; |
| m->data = (m->data << 1) | bit; |
| |
| /* check for sync */ |
| if (m->data == 0xffffffff) { |
| m->count = 32; |
| } |
| |
| if (m->count == 16) { |
| uint8_t start = (m->data >> 14) & 0x3; |
| uint8_t op = (m->data >> 12) & 0x3; |
| uint8_t ta = (m->data) & 0x3; |
| |
| if (start == 1 && op == MDIO_OP_WRITE && ta == 2) { |
| m->state = MDIO_STATE_WRITING; |
| } else if (start == 1 && op == MDIO_OP_READ && (ta & 1) == 0) { |
| m->state = MDIO_STATE_READING; |
| } else { |
| m->state = MDIO_STATE_IDLE; |
| } |
| |
| if (m->state != MDIO_STATE_IDLE) { |
| m->phy_addr = (m->data >> 7) & 0x1f; |
| m->reg_addr = (m->data >> 2) & 0x1f; |
| } |
| |
| if (m->state == MDIO_STATE_READING) { |
| m->data_out = minimac2_mdio_read_reg(s, m->phy_addr, |
| m->reg_addr); |
| } |
| } |
| |
| if (m->count < 16 && m->state == MDIO_STATE_READING) { |
| int bit = (m->data_out & 0x8000) ? 1 : 0; |
| m->data_out <<= 1; |
| |
| if (bit) { |
| s->regs[R_MDIO] |= MDIO_DI; |
| } else { |
| s->regs[R_MDIO] &= ~MDIO_DI; |
| } |
| } |
| |
| if (m->count == 0 && m->state) { |
| if (m->state == MDIO_STATE_WRITING) { |
| uint16_t data = m->data & 0xffff; |
| minimac2_mdio_write_reg(s, m->phy_addr, m->reg_addr, data); |
| } |
| m->state = MDIO_STATE_IDLE; |
| } |
| m->count--; |
| } |
| |
| m->last_clk = (s->regs[R_MDIO] & MDIO_CLK) ? 1 : 0; |
| } |
| |
| static size_t assemble_frame(uint8_t *buf, size_t size, |
| const uint8_t *payload, size_t payload_size) |
| { |
| uint32_t crc; |
| |
| if (size < payload_size + 12) { |
| error_report("milkymist_minimac2: received too big ethernet frame"); |
| return 0; |
| } |
| |
| /* prepend preamble and sfd */ |
| memcpy(buf, preamble_sfd, 8); |
| |
| /* now copy the payload */ |
| memcpy(buf + 8, payload, payload_size); |
| |
| /* pad frame if needed */ |
| if (payload_size < 60) { |
| memset(buf + payload_size + 8, 0, 60 - payload_size); |
| payload_size = 60; |
| } |
| |
| /* append fcs */ |
| crc = cpu_to_le32(crc32(0, buf + 8, payload_size)); |
| memcpy(buf + payload_size + 8, &crc, 4); |
| |
| return payload_size + 12; |
| } |
| |
| static void minimac2_tx(MilkymistMinimac2State *s) |
| { |
| uint32_t txcount = s->regs[R_TXCOUNT]; |
| uint8_t *buf = s->tx_buf; |
| |
| if (txcount < 64) { |
| error_report("milkymist_minimac2: ethernet frame too small (%u < %u)", |
| txcount, 64); |
| goto err; |
| } |
| |
| if (txcount > MINIMAC2_MTU) { |
| error_report("milkymist_minimac2: MTU exceeded (%u > %u)", |
| txcount, MINIMAC2_MTU); |
| goto err; |
| } |
| |
| if (memcmp(buf, preamble_sfd, 8) != 0) { |
| error_report("milkymist_minimac2: frame doesn't contain the preamble " |
| "and/or the SFD (%02x %02x %02x %02x %02x %02x %02x %02x)", |
| buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]); |
| goto err; |
| } |
| |
| trace_milkymist_minimac2_tx_frame(txcount - 12); |
| |
| /* send packet, skipping preamble and sfd */ |
| qemu_send_packet_raw(&s->nic->nc, buf + 8, txcount - 12); |
| |
| s->regs[R_TXCOUNT] = 0; |
| |
| err: |
| trace_milkymist_minimac2_pulse_irq_tx(); |
| qemu_irq_pulse(s->tx_irq); |
| } |
| |
| static void update_rx_interrupt(MilkymistMinimac2State *s) |
| { |
| if (s->regs[R_STATE0] == STATE_PENDING |
| || s->regs[R_STATE1] == STATE_PENDING) { |
| trace_milkymist_minimac2_raise_irq_rx(); |
| qemu_irq_raise(s->rx_irq); |
| } else { |
| trace_milkymist_minimac2_lower_irq_rx(); |
| qemu_irq_lower(s->rx_irq); |
| } |
| } |
| |
| static ssize_t minimac2_rx(VLANClientState *nc, const uint8_t *buf, size_t size) |
| { |
| MilkymistMinimac2State *s = DO_UPCAST(NICState, nc, nc)->opaque; |
| |
| uint32_t r_count; |
| uint32_t r_state; |
| uint8_t *rx_buf; |
| |
| size_t frame_size; |
| |
| trace_milkymist_minimac2_rx_frame(buf, size); |
| |
| /* choose appropriate slot */ |
| if (s->regs[R_STATE0] == STATE_LOADED) { |
| r_count = R_COUNT0; |
| r_state = R_STATE0; |
| rx_buf = s->rx0_buf; |
| } else if (s->regs[R_STATE1] == STATE_LOADED) { |
| r_count = R_COUNT1; |
| r_state = R_STATE1; |
| rx_buf = s->rx1_buf; |
| } else { |
| trace_milkymist_minimac2_drop_rx_frame(buf); |
| return size; |
| } |
| |
| /* assemble frame */ |
| frame_size = assemble_frame(rx_buf, MINIMAC2_BUFFER_SIZE, buf, size); |
| |
| if (frame_size == 0) { |
| return size; |
| } |
| |
| trace_milkymist_minimac2_rx_transfer(rx_buf, frame_size); |
| |
| /* update slot */ |
| s->regs[r_count] = frame_size; |
| s->regs[r_state] = STATE_PENDING; |
| |
| update_rx_interrupt(s); |
| |
| return size; |
| } |
| |
| static uint64_t |
| minimac2_read(void *opaque, target_phys_addr_t addr, unsigned size) |
| { |
| MilkymistMinimac2State *s = opaque; |
| uint32_t r = 0; |
| |
| addr >>= 2; |
| switch (addr) { |
| case R_SETUP: |
| case R_MDIO: |
| case R_STATE0: |
| case R_COUNT0: |
| case R_STATE1: |
| case R_COUNT1: |
| case R_TXCOUNT: |
| r = s->regs[addr]; |
| break; |
| |
| default: |
| error_report("milkymist_minimac2: read access to unknown register 0x" |
| TARGET_FMT_plx, addr << 2); |
| break; |
| } |
| |
| trace_milkymist_minimac2_memory_read(addr << 2, r); |
| |
| return r; |
| } |
| |
| static void |
| minimac2_write(void *opaque, target_phys_addr_t addr, uint64_t value, |
| unsigned size) |
| { |
| MilkymistMinimac2State *s = opaque; |
| |
| trace_milkymist_minimac2_memory_read(addr, value); |
| |
| addr >>= 2; |
| switch (addr) { |
| case R_MDIO: |
| { |
| /* MDIO_DI is read only */ |
| int mdio_di = (s->regs[R_MDIO] & MDIO_DI); |
| s->regs[R_MDIO] = value; |
| if (mdio_di) { |
| s->regs[R_MDIO] |= mdio_di; |
| } else { |
| s->regs[R_MDIO] &= ~mdio_di; |
| } |
| |
| minimac2_update_mdio(s); |
| } break; |
| case R_TXCOUNT: |
| s->regs[addr] = value; |
| if (value > 0) { |
| minimac2_tx(s); |
| } |
| break; |
| case R_STATE0: |
| case R_STATE1: |
| s->regs[addr] = value; |
| update_rx_interrupt(s); |
| break; |
| case R_SETUP: |
| case R_COUNT0: |
| case R_COUNT1: |
| s->regs[addr] = value; |
| break; |
| |
| default: |
| error_report("milkymist_minimac2: write access to unknown register 0x" |
| TARGET_FMT_plx, addr << 2); |
| break; |
| } |
| } |
| |
| static const MemoryRegionOps minimac2_ops = { |
| .read = minimac2_read, |
| .write = minimac2_write, |
| .valid = { |
| .min_access_size = 4, |
| .max_access_size = 4, |
| }, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static int minimac2_can_rx(VLANClientState *nc) |
| { |
| MilkymistMinimac2State *s = DO_UPCAST(NICState, nc, nc)->opaque; |
| |
| if (s->regs[R_STATE0] == STATE_LOADED) { |
| return 1; |
| } |
| if (s->regs[R_STATE1] == STATE_LOADED) { |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| static void minimac2_cleanup(VLANClientState *nc) |
| { |
| MilkymistMinimac2State *s = DO_UPCAST(NICState, nc, nc)->opaque; |
| |
| s->nic = NULL; |
| } |
| |
| static void milkymist_minimac2_reset(DeviceState *d) |
| { |
| MilkymistMinimac2State *s = |
| container_of(d, MilkymistMinimac2State, busdev.qdev); |
| int i; |
| |
| for (i = 0; i < R_MAX; i++) { |
| s->regs[i] = 0; |
| } |
| for (i = 0; i < R_PHY_MAX; i++) { |
| s->phy_regs[i] = 0; |
| } |
| |
| /* defaults */ |
| s->phy_regs[R_PHY_ID1] = 0x0022; /* Micrel KSZ8001L */ |
| s->phy_regs[R_PHY_ID2] = 0x161a; |
| } |
| |
| static NetClientInfo net_milkymist_minimac2_info = { |
| .type = NET_CLIENT_TYPE_NIC, |
| .size = sizeof(NICState), |
| .can_receive = minimac2_can_rx, |
| .receive = minimac2_rx, |
| .cleanup = minimac2_cleanup, |
| }; |
| |
| static int milkymist_minimac2_init(SysBusDevice *dev) |
| { |
| MilkymistMinimac2State *s = FROM_SYSBUS(typeof(*s), dev); |
| size_t buffers_size = TARGET_PAGE_ALIGN(3 * MINIMAC2_BUFFER_SIZE); |
| |
| sysbus_init_irq(dev, &s->rx_irq); |
| sysbus_init_irq(dev, &s->tx_irq); |
| |
| memory_region_init_io(&s->regs_region, &minimac2_ops, s, |
| "milkymist-minimac2", R_MAX * 4); |
| sysbus_init_mmio(dev, &s->regs_region); |
| |
| /* register buffers memory */ |
| memory_region_init_ram(&s->buffers, "milkymist-minimac2.buffers", |
| buffers_size); |
| vmstate_register_ram_global(&s->buffers); |
| s->rx0_buf = memory_region_get_ram_ptr(&s->buffers); |
| s->rx1_buf = s->rx0_buf + MINIMAC2_BUFFER_SIZE; |
| s->tx_buf = s->rx1_buf + MINIMAC2_BUFFER_SIZE; |
| |
| sysbus_add_memory(dev, s->buffers_base, &s->buffers); |
| |
| qemu_macaddr_default_if_unset(&s->conf.macaddr); |
| s->nic = qemu_new_nic(&net_milkymist_minimac2_info, &s->conf, |
| dev->qdev.info->name, dev->qdev.id, s); |
| qemu_format_nic_info_str(&s->nic->nc, s->conf.macaddr.a); |
| |
| return 0; |
| } |
| |
| static const VMStateDescription vmstate_milkymist_minimac2_mdio = { |
| .name = "milkymist-minimac2-mdio", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .minimum_version_id_old = 1, |
| .fields = (VMStateField[]) { |
| VMSTATE_INT32(last_clk, MilkymistMinimac2MdioState), |
| VMSTATE_INT32(count, MilkymistMinimac2MdioState), |
| VMSTATE_UINT32(data, MilkymistMinimac2MdioState), |
| VMSTATE_UINT16(data_out, MilkymistMinimac2MdioState), |
| VMSTATE_INT32(state, MilkymistMinimac2MdioState), |
| VMSTATE_UINT8(phy_addr, MilkymistMinimac2MdioState), |
| VMSTATE_UINT8(reg_addr, MilkymistMinimac2MdioState), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static const VMStateDescription vmstate_milkymist_minimac2 = { |
| .name = "milkymist-minimac2", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .minimum_version_id_old = 1, |
| .fields = (VMStateField[]) { |
| VMSTATE_UINT32_ARRAY(regs, MilkymistMinimac2State, R_MAX), |
| VMSTATE_UINT16_ARRAY(phy_regs, MilkymistMinimac2State, R_PHY_MAX), |
| VMSTATE_STRUCT(mdio, MilkymistMinimac2State, 0, |
| vmstate_milkymist_minimac2_mdio, MilkymistMinimac2MdioState), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static SysBusDeviceInfo milkymist_minimac2_info = { |
| .init = milkymist_minimac2_init, |
| .qdev.name = "milkymist-minimac2", |
| .qdev.size = sizeof(MilkymistMinimac2State), |
| .qdev.vmsd = &vmstate_milkymist_minimac2, |
| .qdev.reset = milkymist_minimac2_reset, |
| .qdev.props = (Property[]) { |
| DEFINE_PROP_TADDR("buffers_base", MilkymistMinimac2State, |
| buffers_base, 0), |
| DEFINE_NIC_PROPERTIES(MilkymistMinimac2State, conf), |
| DEFINE_PROP_STRING("phy_model", MilkymistMinimac2State, phy_model), |
| DEFINE_PROP_END_OF_LIST(), |
| } |
| }; |
| |
| static void milkymist_minimac2_register(void) |
| { |
| sysbus_register_withprop(&milkymist_minimac2_info); |
| } |
| |
| device_init(milkymist_minimac2_register) |