| /* |
| * TI OMAP processors emulation. |
| * |
| * Copyright (C) 2006-2008 Andrzej Zaborowski <balrog@zabor.org> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 or |
| * (at your option) version 3 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qemu/log.h" |
| #include "qemu/error-report.h" |
| #include "qemu/main-loop.h" |
| #include "qapi/error.h" |
| #include "cpu.h" |
| #include "exec/address-spaces.h" |
| #include "hw/hw.h" |
| #include "hw/irq.h" |
| #include "hw/qdev-properties.h" |
| #include "hw/arm/boot.h" |
| #include "hw/arm/omap.h" |
| #include "sysemu/blockdev.h" |
| #include "sysemu/sysemu.h" |
| #include "hw/arm/soc_dma.h" |
| #include "sysemu/qtest.h" |
| #include "sysemu/reset.h" |
| #include "sysemu/runstate.h" |
| #include "sysemu/rtc.h" |
| #include "qemu/range.h" |
| #include "hw/sysbus.h" |
| #include "qemu/cutils.h" |
| #include "qemu/bcd.h" |
| |
| static inline void omap_log_badwidth(const char *funcname, hwaddr addr, int sz) |
| { |
| qemu_log_mask(LOG_GUEST_ERROR, "%s: %d-bit register %#08" HWADDR_PRIx "\n", |
| funcname, 8 * sz, addr); |
| } |
| |
| /* Should signal the TCMI/GPMC */ |
| uint32_t omap_badwidth_read8(void *opaque, hwaddr addr) |
| { |
| uint8_t ret; |
| |
| omap_log_badwidth(__func__, addr, 1); |
| cpu_physical_memory_read(addr, &ret, 1); |
| return ret; |
| } |
| |
| void omap_badwidth_write8(void *opaque, hwaddr addr, |
| uint32_t value) |
| { |
| uint8_t val8 = value; |
| |
| omap_log_badwidth(__func__, addr, 1); |
| cpu_physical_memory_write(addr, &val8, 1); |
| } |
| |
| uint32_t omap_badwidth_read16(void *opaque, hwaddr addr) |
| { |
| uint16_t ret; |
| |
| omap_log_badwidth(__func__, addr, 2); |
| cpu_physical_memory_read(addr, &ret, 2); |
| return ret; |
| } |
| |
| void omap_badwidth_write16(void *opaque, hwaddr addr, |
| uint32_t value) |
| { |
| uint16_t val16 = value; |
| |
| omap_log_badwidth(__func__, addr, 2); |
| cpu_physical_memory_write(addr, &val16, 2); |
| } |
| |
| uint32_t omap_badwidth_read32(void *opaque, hwaddr addr) |
| { |
| uint32_t ret; |
| |
| omap_log_badwidth(__func__, addr, 4); |
| cpu_physical_memory_read(addr, &ret, 4); |
| return ret; |
| } |
| |
| void omap_badwidth_write32(void *opaque, hwaddr addr, |
| uint32_t value) |
| { |
| omap_log_badwidth(__func__, addr, 4); |
| cpu_physical_memory_write(addr, &value, 4); |
| } |
| |
| /* MPU OS timers */ |
| struct omap_mpu_timer_s { |
| MemoryRegion iomem; |
| qemu_irq irq; |
| omap_clk clk; |
| uint32_t val; |
| int64_t time; |
| QEMUTimer *timer; |
| QEMUBH *tick; |
| int64_t rate; |
| int it_ena; |
| |
| int enable; |
| int ptv; |
| int ar; |
| int st; |
| uint32_t reset_val; |
| }; |
| |
| static inline uint32_t omap_timer_read(struct omap_mpu_timer_s *timer) |
| { |
| uint64_t distance = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) - timer->time; |
| |
| if (timer->st && timer->enable && timer->rate) |
| return timer->val - muldiv64(distance >> (timer->ptv + 1), |
| timer->rate, NANOSECONDS_PER_SECOND); |
| else |
| return timer->val; |
| } |
| |
| static inline void omap_timer_sync(struct omap_mpu_timer_s *timer) |
| { |
| timer->val = omap_timer_read(timer); |
| timer->time = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); |
| } |
| |
| static inline void omap_timer_update(struct omap_mpu_timer_s *timer) |
| { |
| int64_t expires; |
| |
| if (timer->enable && timer->st && timer->rate) { |
| timer->val = timer->reset_val; /* Should skip this on clk enable */ |
| expires = muldiv64((uint64_t) timer->val << (timer->ptv + 1), |
| NANOSECONDS_PER_SECOND, timer->rate); |
| |
| /* If timer expiry would be sooner than in about 1 ms and |
| * auto-reload isn't set, then fire immediately. This is a hack |
| * to make systems like PalmOS run in acceptable time. PalmOS |
| * sets the interval to a very low value and polls the status bit |
| * in a busy loop when it wants to sleep just a couple of CPU |
| * ticks. */ |
| if (expires > (NANOSECONDS_PER_SECOND >> 10) || timer->ar) { |
| timer_mod(timer->timer, timer->time + expires); |
| } else { |
| qemu_bh_schedule(timer->tick); |
| } |
| } else |
| timer_del(timer->timer); |
| } |
| |
| static void omap_timer_fire(void *opaque) |
| { |
| struct omap_mpu_timer_s *timer = opaque; |
| |
| if (!timer->ar) { |
| timer->val = 0; |
| timer->st = 0; |
| } |
| |
| if (timer->it_ena) |
| /* Edge-triggered irq */ |
| qemu_irq_pulse(timer->irq); |
| } |
| |
| static void omap_timer_tick(void *opaque) |
| { |
| struct omap_mpu_timer_s *timer = opaque; |
| |
| omap_timer_sync(timer); |
| omap_timer_fire(timer); |
| omap_timer_update(timer); |
| } |
| |
| static void omap_timer_clk_update(void *opaque, int line, int on) |
| { |
| struct omap_mpu_timer_s *timer = opaque; |
| |
| omap_timer_sync(timer); |
| timer->rate = on ? omap_clk_getrate(timer->clk) : 0; |
| omap_timer_update(timer); |
| } |
| |
| static void omap_timer_clk_setup(struct omap_mpu_timer_s *timer) |
| { |
| omap_clk_adduser(timer->clk, |
| qemu_allocate_irq(omap_timer_clk_update, timer, 0)); |
| timer->rate = omap_clk_getrate(timer->clk); |
| } |
| |
| static uint64_t omap_mpu_timer_read(void *opaque, hwaddr addr, |
| unsigned size) |
| { |
| struct omap_mpu_timer_s *s = opaque; |
| |
| if (size != 4) { |
| return omap_badwidth_read32(opaque, addr); |
| } |
| |
| switch (addr) { |
| case 0x00: /* CNTL_TIMER */ |
| return (s->enable << 5) | (s->ptv << 2) | (s->ar << 1) | s->st; |
| |
| case 0x04: /* LOAD_TIM */ |
| break; |
| |
| case 0x08: /* READ_TIM */ |
| return omap_timer_read(s); |
| } |
| |
| OMAP_BAD_REG(addr); |
| return 0; |
| } |
| |
| static void omap_mpu_timer_write(void *opaque, hwaddr addr, |
| uint64_t value, unsigned size) |
| { |
| struct omap_mpu_timer_s *s = opaque; |
| |
| if (size != 4) { |
| omap_badwidth_write32(opaque, addr, value); |
| return; |
| } |
| |
| switch (addr) { |
| case 0x00: /* CNTL_TIMER */ |
| omap_timer_sync(s); |
| s->enable = (value >> 5) & 1; |
| s->ptv = (value >> 2) & 7; |
| s->ar = (value >> 1) & 1; |
| s->st = value & 1; |
| omap_timer_update(s); |
| return; |
| |
| case 0x04: /* LOAD_TIM */ |
| s->reset_val = value; |
| return; |
| |
| case 0x08: /* READ_TIM */ |
| OMAP_RO_REG(addr); |
| break; |
| |
| default: |
| OMAP_BAD_REG(addr); |
| } |
| } |
| |
| static const MemoryRegionOps omap_mpu_timer_ops = { |
| .read = omap_mpu_timer_read, |
| .write = omap_mpu_timer_write, |
| .endianness = DEVICE_LITTLE_ENDIAN, |
| }; |
| |
| static void omap_mpu_timer_reset(struct omap_mpu_timer_s *s) |
| { |
| timer_del(s->timer); |
| s->enable = 0; |
| s->reset_val = 31337; |
| s->val = 0; |
| s->ptv = 0; |
| s->ar = 0; |
| s->st = 0; |
| s->it_ena = 1; |
| } |
| |
| static struct omap_mpu_timer_s *omap_mpu_timer_init(MemoryRegion *system_memory, |
| hwaddr base, |
| qemu_irq irq, omap_clk clk) |
| { |
| struct omap_mpu_timer_s *s = g_new0(struct omap_mpu_timer_s, 1); |
| |
| s->irq = irq; |
| s->clk = clk; |
| s->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, omap_timer_tick, s); |
| s->tick = qemu_bh_new(omap_timer_fire, s); |
| omap_mpu_timer_reset(s); |
| omap_timer_clk_setup(s); |
| |
| memory_region_init_io(&s->iomem, NULL, &omap_mpu_timer_ops, s, |
| "omap-mpu-timer", 0x100); |
| |
| memory_region_add_subregion(system_memory, base, &s->iomem); |
| |
| return s; |
| } |
| |
| /* Watchdog timer */ |
| struct omap_watchdog_timer_s { |
| struct omap_mpu_timer_s timer; |
| MemoryRegion iomem; |
| uint8_t last_wr; |
| int mode; |
| int free; |
| int reset; |
| }; |
| |
| static uint64_t omap_wd_timer_read(void *opaque, hwaddr addr, |
| unsigned size) |
| { |
| struct omap_watchdog_timer_s *s = opaque; |
| |
| if (size != 2) { |
| return omap_badwidth_read16(opaque, addr); |
| } |
| |
| switch (addr) { |
| case 0x00: /* CNTL_TIMER */ |
| return (s->timer.ptv << 9) | (s->timer.ar << 8) | |
| (s->timer.st << 7) | (s->free << 1); |
| |
| case 0x04: /* READ_TIMER */ |
| return omap_timer_read(&s->timer); |
| |
| case 0x08: /* TIMER_MODE */ |
| return s->mode << 15; |
| } |
| |
| OMAP_BAD_REG(addr); |
| return 0; |
| } |
| |
| static void omap_wd_timer_write(void *opaque, hwaddr addr, |
| uint64_t value, unsigned size) |
| { |
| struct omap_watchdog_timer_s *s = opaque; |
| |
| if (size != 2) { |
| omap_badwidth_write16(opaque, addr, value); |
| return; |
| } |
| |
| switch (addr) { |
| case 0x00: /* CNTL_TIMER */ |
| omap_timer_sync(&s->timer); |
| s->timer.ptv = (value >> 9) & 7; |
| s->timer.ar = (value >> 8) & 1; |
| s->timer.st = (value >> 7) & 1; |
| s->free = (value >> 1) & 1; |
| omap_timer_update(&s->timer); |
| break; |
| |
| case 0x04: /* LOAD_TIMER */ |
| s->timer.reset_val = value & 0xffff; |
| break; |
| |
| case 0x08: /* TIMER_MODE */ |
| if (!s->mode && ((value >> 15) & 1)) |
| omap_clk_get(s->timer.clk); |
| s->mode |= (value >> 15) & 1; |
| if (s->last_wr == 0xf5) { |
| if ((value & 0xff) == 0xa0) { |
| if (s->mode) { |
| s->mode = 0; |
| omap_clk_put(s->timer.clk); |
| } |
| } else { |
| /* XXX: on T|E hardware somehow this has no effect, |
| * on Zire 71 it works as specified. */ |
| s->reset = 1; |
| qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET); |
| } |
| } |
| s->last_wr = value & 0xff; |
| break; |
| |
| default: |
| OMAP_BAD_REG(addr); |
| } |
| } |
| |
| static const MemoryRegionOps omap_wd_timer_ops = { |
| .read = omap_wd_timer_read, |
| .write = omap_wd_timer_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static void omap_wd_timer_reset(struct omap_watchdog_timer_s *s) |
| { |
| timer_del(s->timer.timer); |
| if (!s->mode) |
| omap_clk_get(s->timer.clk); |
| s->mode = 1; |
| s->free = 1; |
| s->reset = 0; |
| s->timer.enable = 1; |
| s->timer.it_ena = 1; |
| s->timer.reset_val = 0xffff; |
| s->timer.val = 0; |
| s->timer.st = 0; |
| s->timer.ptv = 0; |
| s->timer.ar = 0; |
| omap_timer_update(&s->timer); |
| } |
| |
| static struct omap_watchdog_timer_s *omap_wd_timer_init(MemoryRegion *memory, |
| hwaddr base, |
| qemu_irq irq, omap_clk clk) |
| { |
| struct omap_watchdog_timer_s *s = g_new0(struct omap_watchdog_timer_s, 1); |
| |
| s->timer.irq = irq; |
| s->timer.clk = clk; |
| s->timer.timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, omap_timer_tick, &s->timer); |
| omap_wd_timer_reset(s); |
| omap_timer_clk_setup(&s->timer); |
| |
| memory_region_init_io(&s->iomem, NULL, &omap_wd_timer_ops, s, |
| "omap-wd-timer", 0x100); |
| memory_region_add_subregion(memory, base, &s->iomem); |
| |
| return s; |
| } |
| |
| /* 32-kHz timer */ |
| struct omap_32khz_timer_s { |
| struct omap_mpu_timer_s timer; |
| MemoryRegion iomem; |
| }; |
| |
| static uint64_t omap_os_timer_read(void *opaque, hwaddr addr, |
| unsigned size) |
| { |
| struct omap_32khz_timer_s *s = opaque; |
| int offset = addr & OMAP_MPUI_REG_MASK; |
| |
| if (size != 4) { |
| return omap_badwidth_read32(opaque, addr); |
| } |
| |
| switch (offset) { |
| case 0x00: /* TVR */ |
| return s->timer.reset_val; |
| |
| case 0x04: /* TCR */ |
| return omap_timer_read(&s->timer); |
| |
| case 0x08: /* CR */ |
| return (s->timer.ar << 3) | (s->timer.it_ena << 2) | s->timer.st; |
| |
| default: |
| break; |
| } |
| OMAP_BAD_REG(addr); |
| return 0; |
| } |
| |
| static void omap_os_timer_write(void *opaque, hwaddr addr, |
| uint64_t value, unsigned size) |
| { |
| struct omap_32khz_timer_s *s = opaque; |
| int offset = addr & OMAP_MPUI_REG_MASK; |
| |
| if (size != 4) { |
| omap_badwidth_write32(opaque, addr, value); |
| return; |
| } |
| |
| switch (offset) { |
| case 0x00: /* TVR */ |
| s->timer.reset_val = value & 0x00ffffff; |
| break; |
| |
| case 0x04: /* TCR */ |
| OMAP_RO_REG(addr); |
| break; |
| |
| case 0x08: /* CR */ |
| s->timer.ar = (value >> 3) & 1; |
| s->timer.it_ena = (value >> 2) & 1; |
| if (s->timer.st != (value & 1) || (value & 2)) { |
| omap_timer_sync(&s->timer); |
| s->timer.enable = value & 1; |
| s->timer.st = value & 1; |
| omap_timer_update(&s->timer); |
| } |
| break; |
| |
| default: |
| OMAP_BAD_REG(addr); |
| } |
| } |
| |
| static const MemoryRegionOps omap_os_timer_ops = { |
| .read = omap_os_timer_read, |
| .write = omap_os_timer_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static void omap_os_timer_reset(struct omap_32khz_timer_s *s) |
| { |
| timer_del(s->timer.timer); |
| s->timer.enable = 0; |
| s->timer.it_ena = 0; |
| s->timer.reset_val = 0x00ffffff; |
| s->timer.val = 0; |
| s->timer.st = 0; |
| s->timer.ptv = 0; |
| s->timer.ar = 1; |
| } |
| |
| static struct omap_32khz_timer_s *omap_os_timer_init(MemoryRegion *memory, |
| hwaddr base, |
| qemu_irq irq, omap_clk clk) |
| { |
| struct omap_32khz_timer_s *s = g_new0(struct omap_32khz_timer_s, 1); |
| |
| s->timer.irq = irq; |
| s->timer.clk = clk; |
| s->timer.timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, omap_timer_tick, &s->timer); |
| omap_os_timer_reset(s); |
| omap_timer_clk_setup(&s->timer); |
| |
| memory_region_init_io(&s->iomem, NULL, &omap_os_timer_ops, s, |
| "omap-os-timer", 0x800); |
| memory_region_add_subregion(memory, base, &s->iomem); |
| |
| return s; |
| } |
| |
| /* Ultra Low-Power Device Module */ |
| static uint64_t omap_ulpd_pm_read(void *opaque, hwaddr addr, |
| unsigned size) |
| { |
| struct omap_mpu_state_s *s = opaque; |
| uint16_t ret; |
| |
| if (size != 2) { |
| return omap_badwidth_read16(opaque, addr); |
| } |
| |
| switch (addr) { |
| case 0x14: /* IT_STATUS */ |
| ret = s->ulpd_pm_regs[addr >> 2]; |
| s->ulpd_pm_regs[addr >> 2] = 0; |
| qemu_irq_lower(qdev_get_gpio_in(s->ih[1], OMAP_INT_GAUGE_32K)); |
| return ret; |
| |
| case 0x18: /* Reserved */ |
| case 0x1c: /* Reserved */ |
| case 0x20: /* Reserved */ |
| case 0x28: /* Reserved */ |
| case 0x2c: /* Reserved */ |
| OMAP_BAD_REG(addr); |
| /* fall through */ |
| case 0x00: /* COUNTER_32_LSB */ |
| case 0x04: /* COUNTER_32_MSB */ |
| case 0x08: /* COUNTER_HIGH_FREQ_LSB */ |
| case 0x0c: /* COUNTER_HIGH_FREQ_MSB */ |
| case 0x10: /* GAUGING_CTRL */ |
| case 0x24: /* SETUP_ANALOG_CELL3_ULPD1 */ |
| case 0x30: /* CLOCK_CTRL */ |
| case 0x34: /* SOFT_REQ */ |
| case 0x38: /* COUNTER_32_FIQ */ |
| case 0x3c: /* DPLL_CTRL */ |
| case 0x40: /* STATUS_REQ */ |
| /* XXX: check clk::usecount state for every clock */ |
| case 0x48: /* LOCL_TIME */ |
| case 0x4c: /* APLL_CTRL */ |
| case 0x50: /* POWER_CTRL */ |
| return s->ulpd_pm_regs[addr >> 2]; |
| } |
| |
| OMAP_BAD_REG(addr); |
| return 0; |
| } |
| |
| static inline void omap_ulpd_clk_update(struct omap_mpu_state_s *s, |
| uint16_t diff, uint16_t value) |
| { |
| if (diff & (1 << 4)) /* USB_MCLK_EN */ |
| omap_clk_onoff(omap_findclk(s, "usb_clk0"), (value >> 4) & 1); |
| if (diff & (1 << 5)) /* DIS_USB_PVCI_CLK */ |
| omap_clk_onoff(omap_findclk(s, "usb_w2fc_ck"), (~value >> 5) & 1); |
| } |
| |
| static inline void omap_ulpd_req_update(struct omap_mpu_state_s *s, |
| uint16_t diff, uint16_t value) |
| { |
| if (diff & (1 << 0)) /* SOFT_DPLL_REQ */ |
| omap_clk_canidle(omap_findclk(s, "dpll4"), (~value >> 0) & 1); |
| if (diff & (1 << 1)) /* SOFT_COM_REQ */ |
| omap_clk_canidle(omap_findclk(s, "com_mclk_out"), (~value >> 1) & 1); |
| if (diff & (1 << 2)) /* SOFT_SDW_REQ */ |
| omap_clk_canidle(omap_findclk(s, "bt_mclk_out"), (~value >> 2) & 1); |
| if (diff & (1 << 3)) /* SOFT_USB_REQ */ |
| omap_clk_canidle(omap_findclk(s, "usb_clk0"), (~value >> 3) & 1); |
| } |
| |
| static void omap_ulpd_pm_write(void *opaque, hwaddr addr, |
| uint64_t value, unsigned size) |
| { |
| struct omap_mpu_state_s *s = opaque; |
| int64_t now, ticks; |
| int div, mult; |
| static const int bypass_div[4] = { 1, 2, 4, 4 }; |
| uint16_t diff; |
| |
| if (size != 2) { |
| omap_badwidth_write16(opaque, addr, value); |
| return; |
| } |
| |
| switch (addr) { |
| case 0x00: /* COUNTER_32_LSB */ |
| case 0x04: /* COUNTER_32_MSB */ |
| case 0x08: /* COUNTER_HIGH_FREQ_LSB */ |
| case 0x0c: /* COUNTER_HIGH_FREQ_MSB */ |
| case 0x14: /* IT_STATUS */ |
| case 0x40: /* STATUS_REQ */ |
| OMAP_RO_REG(addr); |
| break; |
| |
| case 0x10: /* GAUGING_CTRL */ |
| /* Bits 0 and 1 seem to be confused in the OMAP 310 TRM */ |
| if ((s->ulpd_pm_regs[addr >> 2] ^ value) & 1) { |
| now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); |
| |
| if (value & 1) |
| s->ulpd_gauge_start = now; |
| else { |
| now -= s->ulpd_gauge_start; |
| |
| /* 32-kHz ticks */ |
| ticks = muldiv64(now, 32768, NANOSECONDS_PER_SECOND); |
| s->ulpd_pm_regs[0x00 >> 2] = (ticks >> 0) & 0xffff; |
| s->ulpd_pm_regs[0x04 >> 2] = (ticks >> 16) & 0xffff; |
| if (ticks >> 32) /* OVERFLOW_32K */ |
| s->ulpd_pm_regs[0x14 >> 2] |= 1 << 2; |
| |
| /* High frequency ticks */ |
| ticks = muldiv64(now, 12000000, NANOSECONDS_PER_SECOND); |
| s->ulpd_pm_regs[0x08 >> 2] = (ticks >> 0) & 0xffff; |
| s->ulpd_pm_regs[0x0c >> 2] = (ticks >> 16) & 0xffff; |
| if (ticks >> 32) /* OVERFLOW_HI_FREQ */ |
| s->ulpd_pm_regs[0x14 >> 2] |= 1 << 1; |
| |
| s->ulpd_pm_regs[0x14 >> 2] |= 1 << 0; /* IT_GAUGING */ |
| qemu_irq_raise(qdev_get_gpio_in(s->ih[1], OMAP_INT_GAUGE_32K)); |
| } |
| } |
| s->ulpd_pm_regs[addr >> 2] = value; |
| break; |
| |
| case 0x18: /* Reserved */ |
| case 0x1c: /* Reserved */ |
| case 0x20: /* Reserved */ |
| case 0x28: /* Reserved */ |
| case 0x2c: /* Reserved */ |
| OMAP_BAD_REG(addr); |
| /* fall through */ |
| case 0x24: /* SETUP_ANALOG_CELL3_ULPD1 */ |
| case 0x38: /* COUNTER_32_FIQ */ |
| case 0x48: /* LOCL_TIME */ |
| case 0x50: /* POWER_CTRL */ |
| s->ulpd_pm_regs[addr >> 2] = value; |
| break; |
| |
| case 0x30: /* CLOCK_CTRL */ |
| diff = s->ulpd_pm_regs[addr >> 2] ^ value; |
| s->ulpd_pm_regs[addr >> 2] = value & 0x3f; |
| omap_ulpd_clk_update(s, diff, value); |
| break; |
| |
| case 0x34: /* SOFT_REQ */ |
| diff = s->ulpd_pm_regs[addr >> 2] ^ value; |
| s->ulpd_pm_regs[addr >> 2] = value & 0x1f; |
| omap_ulpd_req_update(s, diff, value); |
| break; |
| |
| case 0x3c: /* DPLL_CTRL */ |
| /* XXX: OMAP310 TRM claims bit 3 is PLL_ENABLE, and bit 4 is |
| * omitted altogether, probably a typo. */ |
| /* This register has identical semantics with DPLL(1:3) control |
| * registers, see omap_dpll_write() */ |
| diff = s->ulpd_pm_regs[addr >> 2] & value; |
| s->ulpd_pm_regs[addr >> 2] = value & 0x2fff; |
| if (diff & (0x3ff << 2)) { |
| if (value & (1 << 4)) { /* PLL_ENABLE */ |
| div = ((value >> 5) & 3) + 1; /* PLL_DIV */ |
| mult = MIN((value >> 7) & 0x1f, 1); /* PLL_MULT */ |
| } else { |
| div = bypass_div[((value >> 2) & 3)]; /* BYPASS_DIV */ |
| mult = 1; |
| } |
| omap_clk_setrate(omap_findclk(s, "dpll4"), div, mult); |
| } |
| |
| /* Enter the desired mode. */ |
| s->ulpd_pm_regs[addr >> 2] = |
| (s->ulpd_pm_regs[addr >> 2] & 0xfffe) | |
| ((s->ulpd_pm_regs[addr >> 2] >> 4) & 1); |
| |
| /* Act as if the lock is restored. */ |
| s->ulpd_pm_regs[addr >> 2] |= 2; |
| break; |
| |
| case 0x4c: /* APLL_CTRL */ |
| diff = s->ulpd_pm_regs[addr >> 2] & value; |
| s->ulpd_pm_regs[addr >> 2] = value & 0xf; |
| if (diff & (1 << 0)) /* APLL_NDPLL_SWITCH */ |
| omap_clk_reparent(omap_findclk(s, "ck_48m"), omap_findclk(s, |
| (value & (1 << 0)) ? "apll" : "dpll4")); |
| break; |
| |
| default: |
| OMAP_BAD_REG(addr); |
| } |
| } |
| |
| static const MemoryRegionOps omap_ulpd_pm_ops = { |
| .read = omap_ulpd_pm_read, |
| .write = omap_ulpd_pm_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static void omap_ulpd_pm_reset(struct omap_mpu_state_s *mpu) |
| { |
| mpu->ulpd_pm_regs[0x00 >> 2] = 0x0001; |
| mpu->ulpd_pm_regs[0x04 >> 2] = 0x0000; |
| mpu->ulpd_pm_regs[0x08 >> 2] = 0x0001; |
| mpu->ulpd_pm_regs[0x0c >> 2] = 0x0000; |
| mpu->ulpd_pm_regs[0x10 >> 2] = 0x0000; |
| mpu->ulpd_pm_regs[0x18 >> 2] = 0x01; |
| mpu->ulpd_pm_regs[0x1c >> 2] = 0x01; |
| mpu->ulpd_pm_regs[0x20 >> 2] = 0x01; |
| mpu->ulpd_pm_regs[0x24 >> 2] = 0x03ff; |
| mpu->ulpd_pm_regs[0x28 >> 2] = 0x01; |
| mpu->ulpd_pm_regs[0x2c >> 2] = 0x01; |
| omap_ulpd_clk_update(mpu, mpu->ulpd_pm_regs[0x30 >> 2], 0x0000); |
| mpu->ulpd_pm_regs[0x30 >> 2] = 0x0000; |
| omap_ulpd_req_update(mpu, mpu->ulpd_pm_regs[0x34 >> 2], 0x0000); |
| mpu->ulpd_pm_regs[0x34 >> 2] = 0x0000; |
| mpu->ulpd_pm_regs[0x38 >> 2] = 0x0001; |
| mpu->ulpd_pm_regs[0x3c >> 2] = 0x2211; |
| mpu->ulpd_pm_regs[0x40 >> 2] = 0x0000; /* FIXME: dump a real STATUS_REQ */ |
| mpu->ulpd_pm_regs[0x48 >> 2] = 0x960; |
| mpu->ulpd_pm_regs[0x4c >> 2] = 0x08; |
| mpu->ulpd_pm_regs[0x50 >> 2] = 0x08; |
| omap_clk_setrate(omap_findclk(mpu, "dpll4"), 1, 4); |
| omap_clk_reparent(omap_findclk(mpu, "ck_48m"), omap_findclk(mpu, "dpll4")); |
| } |
| |
| static void omap_ulpd_pm_init(MemoryRegion *system_memory, |
| hwaddr base, |
| struct omap_mpu_state_s *mpu) |
| { |
| memory_region_init_io(&mpu->ulpd_pm_iomem, NULL, &omap_ulpd_pm_ops, mpu, |
| "omap-ulpd-pm", 0x800); |
| memory_region_add_subregion(system_memory, base, &mpu->ulpd_pm_iomem); |
| omap_ulpd_pm_reset(mpu); |
| } |
| |
| /* OMAP Pin Configuration */ |
| static uint64_t omap_pin_cfg_read(void *opaque, hwaddr addr, |
| unsigned size) |
| { |
| struct omap_mpu_state_s *s = opaque; |
| |
| if (size != 4) { |
| return omap_badwidth_read32(opaque, addr); |
| } |
| |
| switch (addr) { |
| case 0x00: /* FUNC_MUX_CTRL_0 */ |
| case 0x04: /* FUNC_MUX_CTRL_1 */ |
| case 0x08: /* FUNC_MUX_CTRL_2 */ |
| return s->func_mux_ctrl[addr >> 2]; |
| |
| case 0x0c: /* COMP_MODE_CTRL_0 */ |
| return s->comp_mode_ctrl[0]; |
| |
| case 0x10: /* FUNC_MUX_CTRL_3 */ |
| case 0x14: /* FUNC_MUX_CTRL_4 */ |
| case 0x18: /* FUNC_MUX_CTRL_5 */ |
| case 0x1c: /* FUNC_MUX_CTRL_6 */ |
| case 0x20: /* FUNC_MUX_CTRL_7 */ |
| case 0x24: /* FUNC_MUX_CTRL_8 */ |
| case 0x28: /* FUNC_MUX_CTRL_9 */ |
| case 0x2c: /* FUNC_MUX_CTRL_A */ |
| case 0x30: /* FUNC_MUX_CTRL_B */ |
| case 0x34: /* FUNC_MUX_CTRL_C */ |
| case 0x38: /* FUNC_MUX_CTRL_D */ |
| return s->func_mux_ctrl[(addr >> 2) - 1]; |
| |
| case 0x40: /* PULL_DWN_CTRL_0 */ |
| case 0x44: /* PULL_DWN_CTRL_1 */ |
| case 0x48: /* PULL_DWN_CTRL_2 */ |
| case 0x4c: /* PULL_DWN_CTRL_3 */ |
| return s->pull_dwn_ctrl[(addr & 0xf) >> 2]; |
| |
| case 0x50: /* GATE_INH_CTRL_0 */ |
| return s->gate_inh_ctrl[0]; |
| |
| case 0x60: /* VOLTAGE_CTRL_0 */ |
| return s->voltage_ctrl[0]; |
| |
| case 0x70: /* TEST_DBG_CTRL_0 */ |
| return s->test_dbg_ctrl[0]; |
| |
| case 0x80: /* MOD_CONF_CTRL_0 */ |
| return s->mod_conf_ctrl[0]; |
| } |
| |
| OMAP_BAD_REG(addr); |
| return 0; |
| } |
| |
| static inline void omap_pin_funcmux0_update(struct omap_mpu_state_s *s, |
| uint32_t diff, uint32_t value) |
| { |
| if (s->compat1509) { |
| if (diff & (1 << 9)) /* BLUETOOTH */ |
| omap_clk_onoff(omap_findclk(s, "bt_mclk_out"), |
| (~value >> 9) & 1); |
| if (diff & (1 << 7)) /* USB.CLKO */ |
| omap_clk_onoff(omap_findclk(s, "usb.clko"), |
| (value >> 7) & 1); |
| } |
| } |
| |
| static inline void omap_pin_funcmux1_update(struct omap_mpu_state_s *s, |
| uint32_t diff, uint32_t value) |
| { |
| if (s->compat1509) { |
| if (diff & (1U << 31)) { |
| /* MCBSP3_CLK_HIZ_DI */ |
| omap_clk_onoff(omap_findclk(s, "mcbsp3.clkx"), (value >> 31) & 1); |
| } |
| if (diff & (1 << 1)) { |
| /* CLK32K */ |
| omap_clk_onoff(omap_findclk(s, "clk32k_out"), (~value >> 1) & 1); |
| } |
| } |
| } |
| |
| static inline void omap_pin_modconf1_update(struct omap_mpu_state_s *s, |
| uint32_t diff, uint32_t value) |
| { |
| if (diff & (1U << 31)) { |
| /* CONF_MOD_UART3_CLK_MODE_R */ |
| omap_clk_reparent(omap_findclk(s, "uart3_ck"), |
| omap_findclk(s, ((value >> 31) & 1) ? |
| "ck_48m" : "armper_ck")); |
| } |
| if (diff & (1 << 30)) /* CONF_MOD_UART2_CLK_MODE_R */ |
| omap_clk_reparent(omap_findclk(s, "uart2_ck"), |
| omap_findclk(s, ((value >> 30) & 1) ? |
| "ck_48m" : "armper_ck")); |
| if (diff & (1 << 29)) /* CONF_MOD_UART1_CLK_MODE_R */ |
| omap_clk_reparent(omap_findclk(s, "uart1_ck"), |
| omap_findclk(s, ((value >> 29) & 1) ? |
| "ck_48m" : "armper_ck")); |
| if (diff & (1 << 23)) /* CONF_MOD_MMC_SD_CLK_REQ_R */ |
| omap_clk_reparent(omap_findclk(s, "mmc_ck"), |
| omap_findclk(s, ((value >> 23) & 1) ? |
| "ck_48m" : "armper_ck")); |
| if (diff & (1 << 12)) /* CONF_MOD_COM_MCLK_12_48_S */ |
| omap_clk_reparent(omap_findclk(s, "com_mclk_out"), |
| omap_findclk(s, ((value >> 12) & 1) ? |
| "ck_48m" : "armper_ck")); |
| if (diff & (1 << 9)) /* CONF_MOD_USB_HOST_HHC_UHO */ |
| omap_clk_onoff(omap_findclk(s, "usb_hhc_ck"), (value >> 9) & 1); |
| } |
| |
| static void omap_pin_cfg_write(void *opaque, hwaddr addr, |
| uint64_t value, unsigned size) |
| { |
| struct omap_mpu_state_s *s = opaque; |
| uint32_t diff; |
| |
| if (size != 4) { |
| omap_badwidth_write32(opaque, addr, value); |
| return; |
| } |
| |
| switch (addr) { |
| case 0x00: /* FUNC_MUX_CTRL_0 */ |
| diff = s->func_mux_ctrl[addr >> 2] ^ value; |
| s->func_mux_ctrl[addr >> 2] = value; |
| omap_pin_funcmux0_update(s, diff, value); |
| return; |
| |
| case 0x04: /* FUNC_MUX_CTRL_1 */ |
| diff = s->func_mux_ctrl[addr >> 2] ^ value; |
| s->func_mux_ctrl[addr >> 2] = value; |
| omap_pin_funcmux1_update(s, diff, value); |
| return; |
| |
| case 0x08: /* FUNC_MUX_CTRL_2 */ |
| s->func_mux_ctrl[addr >> 2] = value; |
| return; |
| |
| case 0x0c: /* COMP_MODE_CTRL_0 */ |
| s->comp_mode_ctrl[0] = value; |
| s->compat1509 = (value != 0x0000eaef); |
| omap_pin_funcmux0_update(s, ~0, s->func_mux_ctrl[0]); |
| omap_pin_funcmux1_update(s, ~0, s->func_mux_ctrl[1]); |
| return; |
| |
| case 0x10: /* FUNC_MUX_CTRL_3 */ |
| case 0x14: /* FUNC_MUX_CTRL_4 */ |
| case 0x18: /* FUNC_MUX_CTRL_5 */ |
| case 0x1c: /* FUNC_MUX_CTRL_6 */ |
| case 0x20: /* FUNC_MUX_CTRL_7 */ |
| case 0x24: /* FUNC_MUX_CTRL_8 */ |
| case 0x28: /* FUNC_MUX_CTRL_9 */ |
| case 0x2c: /* FUNC_MUX_CTRL_A */ |
| case 0x30: /* FUNC_MUX_CTRL_B */ |
| case 0x34: /* FUNC_MUX_CTRL_C */ |
| case 0x38: /* FUNC_MUX_CTRL_D */ |
| s->func_mux_ctrl[(addr >> 2) - 1] = value; |
| return; |
| |
| case 0x40: /* PULL_DWN_CTRL_0 */ |
| case 0x44: /* PULL_DWN_CTRL_1 */ |
| case 0x48: /* PULL_DWN_CTRL_2 */ |
| case 0x4c: /* PULL_DWN_CTRL_3 */ |
| s->pull_dwn_ctrl[(addr & 0xf) >> 2] = value; |
| return; |
| |
| case 0x50: /* GATE_INH_CTRL_0 */ |
| s->gate_inh_ctrl[0] = value; |
| return; |
| |
| case 0x60: /* VOLTAGE_CTRL_0 */ |
| s->voltage_ctrl[0] = value; |
| return; |
| |
| case 0x70: /* TEST_DBG_CTRL_0 */ |
| s->test_dbg_ctrl[0] = value; |
| return; |
| |
| case 0x80: /* MOD_CONF_CTRL_0 */ |
| diff = s->mod_conf_ctrl[0] ^ value; |
| s->mod_conf_ctrl[0] = value; |
| omap_pin_modconf1_update(s, diff, value); |
| return; |
| |
| default: |
| OMAP_BAD_REG(addr); |
| } |
| } |
| |
| static const MemoryRegionOps omap_pin_cfg_ops = { |
| .read = omap_pin_cfg_read, |
| .write = omap_pin_cfg_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static void omap_pin_cfg_reset(struct omap_mpu_state_s *mpu) |
| { |
| /* Start in Compatibility Mode. */ |
| mpu->compat1509 = 1; |
| omap_pin_funcmux0_update(mpu, mpu->func_mux_ctrl[0], 0); |
| omap_pin_funcmux1_update(mpu, mpu->func_mux_ctrl[1], 0); |
| omap_pin_modconf1_update(mpu, mpu->mod_conf_ctrl[0], 0); |
| memset(mpu->func_mux_ctrl, 0, sizeof(mpu->func_mux_ctrl)); |
| memset(mpu->comp_mode_ctrl, 0, sizeof(mpu->comp_mode_ctrl)); |
| memset(mpu->pull_dwn_ctrl, 0, sizeof(mpu->pull_dwn_ctrl)); |
| memset(mpu->gate_inh_ctrl, 0, sizeof(mpu->gate_inh_ctrl)); |
| memset(mpu->voltage_ctrl, 0, sizeof(mpu->voltage_ctrl)); |
| memset(mpu->test_dbg_ctrl, 0, sizeof(mpu->test_dbg_ctrl)); |
| memset(mpu->mod_conf_ctrl, 0, sizeof(mpu->mod_conf_ctrl)); |
| } |
| |
| static void omap_pin_cfg_init(MemoryRegion *system_memory, |
| hwaddr base, |
| struct omap_mpu_state_s *mpu) |
| { |
| memory_region_init_io(&mpu->pin_cfg_iomem, NULL, &omap_pin_cfg_ops, mpu, |
| "omap-pin-cfg", 0x800); |
| memory_region_add_subregion(system_memory, base, &mpu->pin_cfg_iomem); |
| omap_pin_cfg_reset(mpu); |
| } |
| |
| /* Device Identification, Die Identification */ |
| static uint64_t omap_id_read(void *opaque, hwaddr addr, |
| unsigned size) |
| { |
| struct omap_mpu_state_s *s = opaque; |
| |
| if (size != 4) { |
| return omap_badwidth_read32(opaque, addr); |
| } |
| |
| switch (addr) { |
| case 0xfffe1800: /* DIE_ID_LSB */ |
| return 0xc9581f0e; |
| case 0xfffe1804: /* DIE_ID_MSB */ |
| return 0xa8858bfa; |
| |
| case 0xfffe2000: /* PRODUCT_ID_LSB */ |
| return 0x00aaaafc; |
| case 0xfffe2004: /* PRODUCT_ID_MSB */ |
| return 0xcafeb574; |
| |
| case 0xfffed400: /* JTAG_ID_LSB */ |
| switch (s->mpu_model) { |
| case omap310: |
| return 0x03310315; |
| case omap1510: |
| return 0x03310115; |
| default: |
| hw_error("%s: bad mpu model\n", __func__); |
| } |
| break; |
| |
| case 0xfffed404: /* JTAG_ID_MSB */ |
| switch (s->mpu_model) { |
| case omap310: |
| return 0xfb57402f; |
| case omap1510: |
| return 0xfb47002f; |
| default: |
| hw_error("%s: bad mpu model\n", __func__); |
| } |
| break; |
| } |
| |
| OMAP_BAD_REG(addr); |
| return 0; |
| } |
| |
| static void omap_id_write(void *opaque, hwaddr addr, |
| uint64_t value, unsigned size) |
| { |
| if (size != 4) { |
| omap_badwidth_write32(opaque, addr, value); |
| return; |
| } |
| |
| OMAP_BAD_REG(addr); |
| } |
| |
| static const MemoryRegionOps omap_id_ops = { |
| .read = omap_id_read, |
| .write = omap_id_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static void omap_id_init(MemoryRegion *memory, struct omap_mpu_state_s *mpu) |
| { |
| memory_region_init_io(&mpu->id_iomem, NULL, &omap_id_ops, mpu, |
| "omap-id", 0x100000000ULL); |
| memory_region_init_alias(&mpu->id_iomem_e18, NULL, "omap-id-e18", &mpu->id_iomem, |
| 0xfffe1800, 0x800); |
| memory_region_add_subregion(memory, 0xfffe1800, &mpu->id_iomem_e18); |
| memory_region_init_alias(&mpu->id_iomem_ed4, NULL, "omap-id-ed4", &mpu->id_iomem, |
| 0xfffed400, 0x100); |
| memory_region_add_subregion(memory, 0xfffed400, &mpu->id_iomem_ed4); |
| if (!cpu_is_omap15xx(mpu)) { |
| memory_region_init_alias(&mpu->id_iomem_ed4, NULL, "omap-id-e20", |
| &mpu->id_iomem, 0xfffe2000, 0x800); |
| memory_region_add_subregion(memory, 0xfffe2000, &mpu->id_iomem_e20); |
| } |
| } |
| |
| /* MPUI Control (Dummy) */ |
| static uint64_t omap_mpui_read(void *opaque, hwaddr addr, |
| unsigned size) |
| { |
| struct omap_mpu_state_s *s = opaque; |
| |
| if (size != 4) { |
| return omap_badwidth_read32(opaque, addr); |
| } |
| |
| switch (addr) { |
| case 0x00: /* CTRL */ |
| return s->mpui_ctrl; |
| case 0x04: /* DEBUG_ADDR */ |
| return 0x01ffffff; |
| case 0x08: /* DEBUG_DATA */ |
| return 0xffffffff; |
| case 0x0c: /* DEBUG_FLAG */ |
| return 0x00000800; |
| case 0x10: /* STATUS */ |
| return 0x00000000; |
| |
| /* Not in OMAP310 */ |
| case 0x14: /* DSP_STATUS */ |
| case 0x18: /* DSP_BOOT_CONFIG */ |
| return 0x00000000; |
| case 0x1c: /* DSP_MPUI_CONFIG */ |
| return 0x0000ffff; |
| } |
| |
| OMAP_BAD_REG(addr); |
| return 0; |
| } |
| |
| static void omap_mpui_write(void *opaque, hwaddr addr, |
| uint64_t value, unsigned size) |
| { |
| struct omap_mpu_state_s *s = opaque; |
| |
| if (size != 4) { |
| omap_badwidth_write32(opaque, addr, value); |
| return; |
| } |
| |
| switch (addr) { |
| case 0x00: /* CTRL */ |
| s->mpui_ctrl = value & 0x007fffff; |
| break; |
| |
| case 0x04: /* DEBUG_ADDR */ |
| case 0x08: /* DEBUG_DATA */ |
| case 0x0c: /* DEBUG_FLAG */ |
| case 0x10: /* STATUS */ |
| /* Not in OMAP310 */ |
| case 0x14: /* DSP_STATUS */ |
| OMAP_RO_REG(addr); |
| break; |
| case 0x18: /* DSP_BOOT_CONFIG */ |
| case 0x1c: /* DSP_MPUI_CONFIG */ |
| break; |
| |
| default: |
| OMAP_BAD_REG(addr); |
| } |
| } |
| |
| static const MemoryRegionOps omap_mpui_ops = { |
| .read = omap_mpui_read, |
| .write = omap_mpui_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static void omap_mpui_reset(struct omap_mpu_state_s *s) |
| { |
| s->mpui_ctrl = 0x0003ff1b; |
| } |
| |
| static void omap_mpui_init(MemoryRegion *memory, hwaddr base, |
| struct omap_mpu_state_s *mpu) |
| { |
| memory_region_init_io(&mpu->mpui_iomem, NULL, &omap_mpui_ops, mpu, |
| "omap-mpui", 0x100); |
| memory_region_add_subregion(memory, base, &mpu->mpui_iomem); |
| |
| omap_mpui_reset(mpu); |
| } |
| |
| /* TIPB Bridges */ |
| struct omap_tipb_bridge_s { |
| qemu_irq abort; |
| MemoryRegion iomem; |
| |
| int width_intr; |
| uint16_t control; |
| uint16_t alloc; |
| uint16_t buffer; |
| uint16_t enh_control; |
| }; |
| |
| static uint64_t omap_tipb_bridge_read(void *opaque, hwaddr addr, |
| unsigned size) |
| { |
| struct omap_tipb_bridge_s *s = opaque; |
| |
| if (size < 2) { |
| return omap_badwidth_read16(opaque, addr); |
| } |
| |
| switch (addr) { |
| case 0x00: /* TIPB_CNTL */ |
| return s->control; |
| case 0x04: /* TIPB_BUS_ALLOC */ |
| return s->alloc; |
| case 0x08: /* MPU_TIPB_CNTL */ |
| return s->buffer; |
| case 0x0c: /* ENHANCED_TIPB_CNTL */ |
| return s->enh_control; |
| case 0x10: /* ADDRESS_DBG */ |
| case 0x14: /* DATA_DEBUG_LOW */ |
| case 0x18: /* DATA_DEBUG_HIGH */ |
| return 0xffff; |
| case 0x1c: /* DEBUG_CNTR_SIG */ |
| return 0x00f8; |
| } |
| |
| OMAP_BAD_REG(addr); |
| return 0; |
| } |
| |
| static void omap_tipb_bridge_write(void *opaque, hwaddr addr, |
| uint64_t value, unsigned size) |
| { |
| struct omap_tipb_bridge_s *s = opaque; |
| |
| if (size < 2) { |
| omap_badwidth_write16(opaque, addr, value); |
| return; |
| } |
| |
| switch (addr) { |
| case 0x00: /* TIPB_CNTL */ |
| s->control = value & 0xffff; |
| break; |
| |
| case 0x04: /* TIPB_BUS_ALLOC */ |
| s->alloc = value & 0x003f; |
| break; |
| |
| case 0x08: /* MPU_TIPB_CNTL */ |
| s->buffer = value & 0x0003; |
| break; |
| |
| case 0x0c: /* ENHANCED_TIPB_CNTL */ |
| s->width_intr = !(value & 2); |
| s->enh_control = value & 0x000f; |
| break; |
| |
| case 0x10: /* ADDRESS_DBG */ |
| case 0x14: /* DATA_DEBUG_LOW */ |
| case 0x18: /* DATA_DEBUG_HIGH */ |
| case 0x1c: /* DEBUG_CNTR_SIG */ |
| OMAP_RO_REG(addr); |
| break; |
| |
| default: |
| OMAP_BAD_REG(addr); |
| } |
| } |
| |
| static const MemoryRegionOps omap_tipb_bridge_ops = { |
| .read = omap_tipb_bridge_read, |
| .write = omap_tipb_bridge_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static void omap_tipb_bridge_reset(struct omap_tipb_bridge_s *s) |
| { |
| s->control = 0xffff; |
| s->alloc = 0x0009; |
| s->buffer = 0x0000; |
| s->enh_control = 0x000f; |
| } |
| |
| static struct omap_tipb_bridge_s *omap_tipb_bridge_init( |
| MemoryRegion *memory, hwaddr base, |
| qemu_irq abort_irq, omap_clk clk) |
| { |
| struct omap_tipb_bridge_s *s = g_new0(struct omap_tipb_bridge_s, 1); |
| |
| s->abort = abort_irq; |
| omap_tipb_bridge_reset(s); |
| |
| memory_region_init_io(&s->iomem, NULL, &omap_tipb_bridge_ops, s, |
| "omap-tipb-bridge", 0x100); |
| memory_region_add_subregion(memory, base, &s->iomem); |
| |
| return s; |
| } |
| |
| /* Dummy Traffic Controller's Memory Interface */ |
| static uint64_t omap_tcmi_read(void *opaque, hwaddr addr, |
| unsigned size) |
| { |
| struct omap_mpu_state_s *s = opaque; |
| uint32_t ret; |
| |
| if (size != 4) { |
| return omap_badwidth_read32(opaque, addr); |
| } |
| |
| switch (addr) { |
| case 0x00: /* IMIF_PRIO */ |
| case 0x04: /* EMIFS_PRIO */ |
| case 0x08: /* EMIFF_PRIO */ |
| case 0x0c: /* EMIFS_CONFIG */ |
| case 0x10: /* EMIFS_CS0_CONFIG */ |
| case 0x14: /* EMIFS_CS1_CONFIG */ |
| case 0x18: /* EMIFS_CS2_CONFIG */ |
| case 0x1c: /* EMIFS_CS3_CONFIG */ |
| case 0x24: /* EMIFF_MRS */ |
| case 0x28: /* TIMEOUT1 */ |
| case 0x2c: /* TIMEOUT2 */ |
| case 0x30: /* TIMEOUT3 */ |
| case 0x3c: /* EMIFF_SDRAM_CONFIG_2 */ |
| case 0x40: /* EMIFS_CFG_DYN_WAIT */ |
| return s->tcmi_regs[addr >> 2]; |
| |
| case 0x20: /* EMIFF_SDRAM_CONFIG */ |
| ret = s->tcmi_regs[addr >> 2]; |
| s->tcmi_regs[addr >> 2] &= ~1; /* XXX: Clear SLRF on SDRAM access */ |
| /* XXX: We can try using the VGA_DIRTY flag for this */ |
| return ret; |
| } |
| |
| OMAP_BAD_REG(addr); |
| return 0; |
| } |
| |
| static void omap_tcmi_write(void *opaque, hwaddr addr, |
| uint64_t value, unsigned size) |
| { |
| struct omap_mpu_state_s *s = opaque; |
| |
| if (size != 4) { |
| omap_badwidth_write32(opaque, addr, value); |
| return; |
| } |
| |
| switch (addr) { |
| case 0x00: /* IMIF_PRIO */ |
| case 0x04: /* EMIFS_PRIO */ |
| case 0x08: /* EMIFF_PRIO */ |
| case 0x10: /* EMIFS_CS0_CONFIG */ |
| case 0x14: /* EMIFS_CS1_CONFIG */ |
| case 0x18: /* EMIFS_CS2_CONFIG */ |
| case 0x1c: /* EMIFS_CS3_CONFIG */ |
| case 0x20: /* EMIFF_SDRAM_CONFIG */ |
| case 0x24: /* EMIFF_MRS */ |
| case 0x28: /* TIMEOUT1 */ |
| case 0x2c: /* TIMEOUT2 */ |
| case 0x30: /* TIMEOUT3 */ |
| case 0x3c: /* EMIFF_SDRAM_CONFIG_2 */ |
| case 0x40: /* EMIFS_CFG_DYN_WAIT */ |
| s->tcmi_regs[addr >> 2] = value; |
| break; |
| case 0x0c: /* EMIFS_CONFIG */ |
| s->tcmi_regs[addr >> 2] = (value & 0xf) | (1 << 4); |
| break; |
| |
| default: |
| OMAP_BAD_REG(addr); |
| } |
| } |
| |
| static const MemoryRegionOps omap_tcmi_ops = { |
| .read = omap_tcmi_read, |
| .write = omap_tcmi_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static void omap_tcmi_reset(struct omap_mpu_state_s *mpu) |
| { |
| mpu->tcmi_regs[0x00 >> 2] = 0x00000000; |
| mpu->tcmi_regs[0x04 >> 2] = 0x00000000; |
| mpu->tcmi_regs[0x08 >> 2] = 0x00000000; |
| mpu->tcmi_regs[0x0c >> 2] = 0x00000010; |
| mpu->tcmi_regs[0x10 >> 2] = 0x0010fffb; |
| mpu->tcmi_regs[0x14 >> 2] = 0x0010fffb; |
| mpu->tcmi_regs[0x18 >> 2] = 0x0010fffb; |
| mpu->tcmi_regs[0x1c >> 2] = 0x0010fffb; |
| mpu->tcmi_regs[0x20 >> 2] = 0x00618800; |
| mpu->tcmi_regs[0x24 >> 2] = 0x00000037; |
| mpu->tcmi_regs[0x28 >> 2] = 0x00000000; |
| mpu->tcmi_regs[0x2c >> 2] = 0x00000000; |
| mpu->tcmi_regs[0x30 >> 2] = 0x00000000; |
| mpu->tcmi_regs[0x3c >> 2] = 0x00000003; |
| mpu->tcmi_regs[0x40 >> 2] = 0x00000000; |
| } |
| |
| static void omap_tcmi_init(MemoryRegion *memory, hwaddr base, |
| struct omap_mpu_state_s *mpu) |
| { |
| memory_region_init_io(&mpu->tcmi_iomem, NULL, &omap_tcmi_ops, mpu, |
| "omap-tcmi", 0x100); |
| memory_region_add_subregion(memory, base, &mpu->tcmi_iomem); |
| omap_tcmi_reset(mpu); |
| } |
| |
| /* Digital phase-locked loops control */ |
| struct dpll_ctl_s { |
| MemoryRegion iomem; |
| uint16_t mode; |
| omap_clk dpll; |
| }; |
| |
| static uint64_t omap_dpll_read(void *opaque, hwaddr addr, |
| unsigned size) |
| { |
| struct dpll_ctl_s *s = opaque; |
| |
| if (size != 2) { |
| return omap_badwidth_read16(opaque, addr); |
| } |
| |
| if (addr == 0x00) /* CTL_REG */ |
| return s->mode; |
| |
| OMAP_BAD_REG(addr); |
| return 0; |
| } |
| |
| static void omap_dpll_write(void *opaque, hwaddr addr, |
| uint64_t value, unsigned size) |
| { |
| struct dpll_ctl_s *s = opaque; |
| uint16_t diff; |
| static const int bypass_div[4] = { 1, 2, 4, 4 }; |
| int div, mult; |
| |
| if (size != 2) { |
| omap_badwidth_write16(opaque, addr, value); |
| return; |
| } |
| |
| if (addr == 0x00) { /* CTL_REG */ |
| /* See omap_ulpd_pm_write() too */ |
| diff = s->mode & value; |
| s->mode = value & 0x2fff; |
| if (diff & (0x3ff << 2)) { |
| if (value & (1 << 4)) { /* PLL_ENABLE */ |
| div = ((value >> 5) & 3) + 1; /* PLL_DIV */ |
| mult = MIN((value >> 7) & 0x1f, 1); /* PLL_MULT */ |
| } else { |
| div = bypass_div[((value >> 2) & 3)]; /* BYPASS_DIV */ |
| mult = 1; |
| } |
| omap_clk_setrate(s->dpll, div, mult); |
| } |
| |
| /* Enter the desired mode. */ |
| s->mode = (s->mode & 0xfffe) | ((s->mode >> 4) & 1); |
| |
| /* Act as if the lock is restored. */ |
| s->mode |= 2; |
| } else { |
| OMAP_BAD_REG(addr); |
| } |
| } |
| |
| static const MemoryRegionOps omap_dpll_ops = { |
| .read = omap_dpll_read, |
| .write = omap_dpll_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static void omap_dpll_reset(struct dpll_ctl_s *s) |
| { |
| s->mode = 0x2002; |
| omap_clk_setrate(s->dpll, 1, 1); |
| } |
| |
| static struct dpll_ctl_s *omap_dpll_init(MemoryRegion *memory, |
| hwaddr base, omap_clk clk) |
| { |
| struct dpll_ctl_s *s = g_malloc0(sizeof(*s)); |
| memory_region_init_io(&s->iomem, NULL, &omap_dpll_ops, s, "omap-dpll", 0x100); |
| |
| s->dpll = clk; |
| omap_dpll_reset(s); |
| |
| memory_region_add_subregion(memory, base, &s->iomem); |
| return s; |
| } |
| |
| /* MPU Clock/Reset/Power Mode Control */ |
| static uint64_t omap_clkm_read(void *opaque, hwaddr addr, |
| unsigned size) |
| { |
| struct omap_mpu_state_s *s = opaque; |
| |
| if (size != 2) { |
| return omap_badwidth_read16(opaque, addr); |
| } |
| |
| switch (addr) { |
| case 0x00: /* ARM_CKCTL */ |
| return s->clkm.arm_ckctl; |
| |
| case 0x04: /* ARM_IDLECT1 */ |
| return s->clkm.arm_idlect1; |
| |
| case 0x08: /* ARM_IDLECT2 */ |
| return s->clkm.arm_idlect2; |
| |
| case 0x0c: /* ARM_EWUPCT */ |
| return s->clkm.arm_ewupct; |
| |
| case 0x10: /* ARM_RSTCT1 */ |
| return s->clkm.arm_rstct1; |
| |
| case 0x14: /* ARM_RSTCT2 */ |
| return s->clkm.arm_rstct2; |
| |
| case 0x18: /* ARM_SYSST */ |
| return (s->clkm.clocking_scheme << 11) | s->clkm.cold_start; |
| |
| case 0x1c: /* ARM_CKOUT1 */ |
| return s->clkm.arm_ckout1; |
| |
| case 0x20: /* ARM_CKOUT2 */ |
| break; |
| } |
| |
| OMAP_BAD_REG(addr); |
| return 0; |
| } |
| |
| static inline void omap_clkm_ckctl_update(struct omap_mpu_state_s *s, |
| uint16_t diff, uint16_t value) |
| { |
| omap_clk clk; |
| |
| if (diff & (1 << 14)) { /* ARM_INTHCK_SEL */ |
| if (value & (1 << 14)) |
| /* Reserved */; |
| else { |
| clk = omap_findclk(s, "arminth_ck"); |
| omap_clk_reparent(clk, omap_findclk(s, "tc_ck")); |
| } |
| } |
| if (diff & (1 << 12)) { /* ARM_TIMXO */ |
| clk = omap_findclk(s, "armtim_ck"); |
| if (value & (1 << 12)) |
| omap_clk_reparent(clk, omap_findclk(s, "clkin")); |
| else |
| omap_clk_reparent(clk, omap_findclk(s, "ck_gen1")); |
| } |
| /* XXX: en_dspck */ |
| if (diff & (3 << 10)) { /* DSPMMUDIV */ |
| clk = omap_findclk(s, "dspmmu_ck"); |
| omap_clk_setrate(clk, 1 << ((value >> 10) & 3), 1); |
| } |
| if (diff & (3 << 8)) { /* TCDIV */ |
| clk = omap_findclk(s, "tc_ck"); |
| omap_clk_setrate(clk, 1 << ((value >> 8) & 3), 1); |
| } |
| if (diff & (3 << 6)) { /* DSPDIV */ |
| clk = omap_findclk(s, "dsp_ck"); |
| omap_clk_setrate(clk, 1 << ((value >> 6) & 3), 1); |
| } |
| if (diff & (3 << 4)) { /* ARMDIV */ |
| clk = omap_findclk(s, "arm_ck"); |
| omap_clk_setrate(clk, 1 << ((value >> 4) & 3), 1); |
| } |
| if (diff & (3 << 2)) { /* LCDDIV */ |
| clk = omap_findclk(s, "lcd_ck"); |
| omap_clk_setrate(clk, 1 << ((value >> 2) & 3), 1); |
| } |
| if (diff & (3 << 0)) { /* PERDIV */ |
| clk = omap_findclk(s, "armper_ck"); |
| omap_clk_setrate(clk, 1 << ((value >> 0) & 3), 1); |
| } |
| } |
| |
| static inline void omap_clkm_idlect1_update(struct omap_mpu_state_s *s, |
| uint16_t diff, uint16_t value) |
| { |
| omap_clk clk; |
| |
| if (value & (1 << 11)) { /* SETARM_IDLE */ |
| cpu_interrupt(CPU(s->cpu), CPU_INTERRUPT_HALT); |
| } |
| if (!(value & (1 << 10))) { /* WKUP_MODE */ |
| /* XXX: disable wakeup from IRQ */ |
| qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN); |
| } |
| |
| #define SET_CANIDLE(clock, bit) \ |
| if (diff & (1 << bit)) { \ |
| clk = omap_findclk(s, clock); \ |
| omap_clk_canidle(clk, (value >> bit) & 1); \ |
| } |
| SET_CANIDLE("mpuwd_ck", 0) /* IDLWDT_ARM */ |
| SET_CANIDLE("armxor_ck", 1) /* IDLXORP_ARM */ |
| SET_CANIDLE("mpuper_ck", 2) /* IDLPER_ARM */ |
| SET_CANIDLE("lcd_ck", 3) /* IDLLCD_ARM */ |
| SET_CANIDLE("lb_ck", 4) /* IDLLB_ARM */ |
| SET_CANIDLE("hsab_ck", 5) /* IDLHSAB_ARM */ |
| SET_CANIDLE("tipb_ck", 6) /* IDLIF_ARM */ |
| SET_CANIDLE("dma_ck", 6) /* IDLIF_ARM */ |
| SET_CANIDLE("tc_ck", 6) /* IDLIF_ARM */ |
| SET_CANIDLE("dpll1", 7) /* IDLDPLL_ARM */ |
| SET_CANIDLE("dpll2", 7) /* IDLDPLL_ARM */ |
| SET_CANIDLE("dpll3", 7) /* IDLDPLL_ARM */ |
| SET_CANIDLE("mpui_ck", 8) /* IDLAPI_ARM */ |
| SET_CANIDLE("armtim_ck", 9) /* IDLTIM_ARM */ |
| } |
| |
| static inline void omap_clkm_idlect2_update(struct omap_mpu_state_s *s, |
| uint16_t diff, uint16_t value) |
| { |
| omap_clk clk; |
| |
| #define SET_ONOFF(clock, bit) \ |
| if (diff & (1 << bit)) { \ |
| clk = omap_findclk(s, clock); \ |
| omap_clk_onoff(clk, (value >> bit) & 1); \ |
| } |
| SET_ONOFF("mpuwd_ck", 0) /* EN_WDTCK */ |
| SET_ONOFF("armxor_ck", 1) /* EN_XORPCK */ |
| SET_ONOFF("mpuper_ck", 2) /* EN_PERCK */ |
| SET_ONOFF("lcd_ck", 3) /* EN_LCDCK */ |
| SET_ONOFF("lb_ck", 4) /* EN_LBCK */ |
| SET_ONOFF("hsab_ck", 5) /* EN_HSABCK */ |
| SET_ONOFF("mpui_ck", 6) /* EN_APICK */ |
| SET_ONOFF("armtim_ck", 7) /* EN_TIMCK */ |
| SET_CANIDLE("dma_ck", 8) /* DMACK_REQ */ |
| SET_ONOFF("arm_gpio_ck", 9) /* EN_GPIOCK */ |
| SET_ONOFF("lbfree_ck", 10) /* EN_LBFREECK */ |
| } |
| |
| static inline void omap_clkm_ckout1_update(struct omap_mpu_state_s *s, |
| uint16_t diff, uint16_t value) |
| { |
| omap_clk clk; |
| |
| if (diff & (3 << 4)) { /* TCLKOUT */ |
| clk = omap_findclk(s, "tclk_out"); |
| switch ((value >> 4) & 3) { |
| case 1: |
| omap_clk_reparent(clk, omap_findclk(s, "ck_gen3")); |
| omap_clk_onoff(clk, 1); |
| break; |
| case 2: |
| omap_clk_reparent(clk, omap_findclk(s, "tc_ck")); |
| omap_clk_onoff(clk, 1); |
| break; |
| default: |
| omap_clk_onoff(clk, 0); |
| } |
| } |
| if (diff & (3 << 2)) { /* DCLKOUT */ |
| clk = omap_findclk(s, "dclk_out"); |
| switch ((value >> 2) & 3) { |
| case 0: |
| omap_clk_reparent(clk, omap_findclk(s, "dspmmu_ck")); |
| break; |
| case 1: |
| omap_clk_reparent(clk, omap_findclk(s, "ck_gen2")); |
| break; |
| case 2: |
| omap_clk_reparent(clk, omap_findclk(s, "dsp_ck")); |
| break; |
| case 3: |
| omap_clk_reparent(clk, omap_findclk(s, "ck_ref14")); |
| break; |
| } |
| } |
| if (diff & (3 << 0)) { /* ACLKOUT */ |
| clk = omap_findclk(s, "aclk_out"); |
| switch ((value >> 0) & 3) { |
| case 1: |
| omap_clk_reparent(clk, omap_findclk(s, "ck_gen1")); |
| omap_clk_onoff(clk, 1); |
| break; |
| case 2: |
| omap_clk_reparent(clk, omap_findclk(s, "arm_ck")); |
| omap_clk_onoff(clk, 1); |
| break; |
| case 3: |
| omap_clk_reparent(clk, omap_findclk(s, "ck_ref14")); |
| omap_clk_onoff(clk, 1); |
| break; |
| default: |
| omap_clk_onoff(clk, 0); |
| } |
| } |
| } |
| |
| static void omap_clkm_write(void *opaque, hwaddr addr, |
| uint64_t value, unsigned size) |
| { |
| struct omap_mpu_state_s *s = opaque; |
| uint16_t diff; |
| omap_clk clk; |
| static const char *clkschemename[8] = { |
| "fully synchronous", "fully asynchronous", "synchronous scalable", |
| "mix mode 1", "mix mode 2", "bypass mode", "mix mode 3", "mix mode 4", |
| }; |
| |
| if (size != 2) { |
| omap_badwidth_write16(opaque, addr, value); |
| return; |
| } |
| |
| switch (addr) { |
| case 0x00: /* ARM_CKCTL */ |
| diff = s->clkm.arm_ckctl ^ value; |
| s->clkm.arm_ckctl = value & 0x7fff; |
| omap_clkm_ckctl_update(s, diff, value); |
| return; |
| |
| case 0x04: /* ARM_IDLECT1 */ |
| diff = s->clkm.arm_idlect1 ^ value; |
| s->clkm.arm_idlect1 = value & 0x0fff; |
| omap_clkm_idlect1_update(s, diff, value); |
| return; |
| |
| case 0x08: /* ARM_IDLECT2 */ |
| diff = s->clkm.arm_idlect2 ^ value; |
| s->clkm.arm_idlect2 = value & 0x07ff; |
| omap_clkm_idlect2_update(s, diff, value); |
| return; |
| |
| case 0x0c: /* ARM_EWUPCT */ |
| s->clkm.arm_ewupct = value & 0x003f; |
| return; |
| |
| case 0x10: /* ARM_RSTCT1 */ |
| diff = s->clkm.arm_rstct1 ^ value; |
| s->clkm.arm_rstct1 = value & 0x0007; |
| if (value & 9) { |
| qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET); |
| s->clkm.cold_start = 0xa; |
| } |
| if (diff & ~value & 4) { /* DSP_RST */ |
| omap_mpui_reset(s); |
| omap_tipb_bridge_reset(s->private_tipb); |
| omap_tipb_bridge_reset(s->public_tipb); |
| } |
| if (diff & 2) { /* DSP_EN */ |
| clk = omap_findclk(s, "dsp_ck"); |
| omap_clk_canidle(clk, (~value >> 1) & 1); |
| } |
| return; |
| |
| case 0x14: /* ARM_RSTCT2 */ |
| s->clkm.arm_rstct2 = value & 0x0001; |
| return; |
| |
| case 0x18: /* ARM_SYSST */ |
| if ((s->clkm.clocking_scheme ^ (value >> 11)) & 7) { |
| s->clkm.clocking_scheme = (value >> 11) & 7; |
| printf("%s: clocking scheme set to %s\n", __func__, |
| clkschemename[s->clkm.clocking_scheme]); |
| } |
| s->clkm.cold_start &= value & 0x3f; |
| return; |
| |
| case 0x1c: /* ARM_CKOUT1 */ |
| diff = s->clkm.arm_ckout1 ^ value; |
| s->clkm.arm_ckout1 = value & 0x003f; |
| omap_clkm_ckout1_update(s, diff, value); |
| return; |
| |
| case 0x20: /* ARM_CKOUT2 */ |
| default: |
| OMAP_BAD_REG(addr); |
| } |
| } |
| |
| static const MemoryRegionOps omap_clkm_ops = { |
| .read = omap_clkm_read, |
| .write = omap_clkm_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static uint64_t omap_clkdsp_read(void *opaque, hwaddr addr, |
| unsigned size) |
| { |
| struct omap_mpu_state_s *s = opaque; |
| CPUState *cpu = CPU(s->cpu); |
| |
| if (size != 2) { |
| return omap_badwidth_read16(opaque, addr); |
| } |
| |
| switch (addr) { |
| case 0x04: /* DSP_IDLECT1 */ |
| return s->clkm.dsp_idlect1; |
| |
| case 0x08: /* DSP_IDLECT2 */ |
| return s->clkm.dsp_idlect2; |
| |
| case 0x14: /* DSP_RSTCT2 */ |
| return s->clkm.dsp_rstct2; |
| |
| case 0x18: /* DSP_SYSST */ |
| return (s->clkm.clocking_scheme << 11) | s->clkm.cold_start | |
| (cpu->halted << 6); /* Quite useless... */ |
| } |
| |
| OMAP_BAD_REG(addr); |
| return 0; |
| } |
| |
| static inline void omap_clkdsp_idlect1_update(struct omap_mpu_state_s *s, |
| uint16_t diff, uint16_t value) |
| { |
| omap_clk clk; |
| |
| SET_CANIDLE("dspxor_ck", 1); /* IDLXORP_DSP */ |
| } |
| |
| static inline void omap_clkdsp_idlect2_update(struct omap_mpu_state_s *s, |
| uint16_t diff, uint16_t value) |
| { |
| omap_clk clk; |
| |
| SET_ONOFF("dspxor_ck", 1); /* EN_XORPCK */ |
| } |
| |
| static void omap_clkdsp_write(void *opaque, hwaddr addr, |
| uint64_t value, unsigned size) |
| { |
| struct omap_mpu_state_s *s = opaque; |
| uint16_t diff; |
| |
| if (size != 2) { |
| omap_badwidth_write16(opaque, addr, value); |
| return; |
| } |
| |
| switch (addr) { |
| case 0x04: /* DSP_IDLECT1 */ |
| diff = s->clkm.dsp_idlect1 ^ value; |
| s->clkm.dsp_idlect1 = value & 0x01f7; |
| omap_clkdsp_idlect1_update(s, diff, value); |
| break; |
| |
| case 0x08: /* DSP_IDLECT2 */ |
| s->clkm.dsp_idlect2 = value & 0x0037; |
| diff = s->clkm.dsp_idlect1 ^ value; |
| omap_clkdsp_idlect2_update(s, diff, value); |
| break; |
| |
| case 0x14: /* DSP_RSTCT2 */ |
| s->clkm.dsp_rstct2 = value & 0x0001; |
| break; |
| |
| case 0x18: /* DSP_SYSST */ |
| s->clkm.cold_start &= value & 0x3f; |
| break; |
| |
| default: |
| OMAP_BAD_REG(addr); |
| } |
| } |
| |
| static const MemoryRegionOps omap_clkdsp_ops = { |
| .read = omap_clkdsp_read, |
| .write = omap_clkdsp_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static void omap_clkm_reset(struct omap_mpu_state_s *s) |
| { |
| if (s->wdt && s->wdt->reset) |
| s->clkm.cold_start = 0x6; |
| s->clkm.clocking_scheme = 0; |
| omap_clkm_ckctl_update(s, ~0, 0x3000); |
| s->clkm.arm_ckctl = 0x3000; |
| omap_clkm_idlect1_update(s, s->clkm.arm_idlect1 ^ 0x0400, 0x0400); |
| s->clkm.arm_idlect1 = 0x0400; |
| omap_clkm_idlect2_update(s, s->clkm.arm_idlect2 ^ 0x0100, 0x0100); |
| s->clkm.arm_idlect2 = 0x0100; |
| s->clkm.arm_ewupct = 0x003f; |
| s->clkm.arm_rstct1 = 0x0000; |
| s->clkm.arm_rstct2 = 0x0000; |
| s->clkm.arm_ckout1 = 0x0015; |
| s->clkm.dpll1_mode = 0x2002; |
| omap_clkdsp_idlect1_update(s, s->clkm.dsp_idlect1 ^ 0x0040, 0x0040); |
| s->clkm.dsp_idlect1 = 0x0040; |
| omap_clkdsp_idlect2_update(s, ~0, 0x0000); |
| s->clkm.dsp_idlect2 = 0x0000; |
| s->clkm.dsp_rstct2 = 0x0000; |
| } |
| |
| static void omap_clkm_init(MemoryRegion *memory, hwaddr mpu_base, |
| hwaddr dsp_base, struct omap_mpu_state_s *s) |
| { |
| memory_region_init_io(&s->clkm_iomem, NULL, &omap_clkm_ops, s, |
| "omap-clkm", 0x100); |
| memory_region_init_io(&s->clkdsp_iomem, NULL, &omap_clkdsp_ops, s, |
| "omap-clkdsp", 0x1000); |
| |
| s->clkm.arm_idlect1 = 0x03ff; |
| s->clkm.arm_idlect2 = 0x0100; |
| s->clkm.dsp_idlect1 = 0x0002; |
| omap_clkm_reset(s); |
| s->clkm.cold_start = 0x3a; |
| |
| memory_region_add_subregion(memory, mpu_base, &s->clkm_iomem); |
| memory_region_add_subregion(memory, dsp_base, &s->clkdsp_iomem); |
| } |
| |
| /* MPU I/O */ |
| struct omap_mpuio_s { |
| qemu_irq irq; |
| qemu_irq kbd_irq; |
| qemu_irq *in; |
| qemu_irq handler[16]; |
| qemu_irq wakeup; |
| MemoryRegion iomem; |
| |
| uint16_t inputs; |
| uint16_t outputs; |
| uint16_t dir; |
| uint16_t edge; |
| uint16_t mask; |
| uint16_t ints; |
| |
| uint16_t debounce; |
| uint16_t latch; |
| uint8_t event; |
| |
| uint8_t buttons[5]; |
| uint8_t row_latch; |
| uint8_t cols; |
| int kbd_mask; |
| int clk; |
| }; |
| |
| static void omap_mpuio_set(void *opaque, int line, int level) |
| { |
| struct omap_mpuio_s *s = opaque; |
| uint16_t prev = s->inputs; |
| |
| if (level) |
| s->inputs |= 1 << line; |
| else |
| s->inputs &= ~(1 << line); |
| |
| if (((1 << line) & s->dir & ~s->mask) && s->clk) { |
| if ((s->edge & s->inputs & ~prev) | (~s->edge & ~s->inputs & prev)) { |
| s->ints |= 1 << line; |
| qemu_irq_raise(s->irq); |
| /* TODO: wakeup */ |
| } |
| if ((s->event & (1 << 0)) && /* SET_GPIO_EVENT_MODE */ |
| (s->event >> 1) == line) /* PIN_SELECT */ |
| s->latch = s->inputs; |
| } |
| } |
| |
| static void omap_mpuio_kbd_update(struct omap_mpuio_s *s) |
| { |
| int i; |
| uint8_t *row, rows = 0, cols = ~s->cols; |
| |
| for (row = s->buttons + 4, i = 1 << 4; i; row --, i >>= 1) |
| if (*row & cols) |
| rows |= i; |
| |
| qemu_set_irq(s->kbd_irq, rows && !s->kbd_mask && s->clk); |
| s->row_latch = ~rows; |
| } |
| |
| static uint64_t omap_mpuio_read(void *opaque, hwaddr addr, |
| unsigned size) |
| { |
| struct omap_mpuio_s *s = opaque; |
| int offset = addr & OMAP_MPUI_REG_MASK; |
| uint16_t ret; |
| |
| if (size != 2) { |
| return omap_badwidth_read16(opaque, addr); |
| } |
| |
| switch (offset) { |
| case 0x00: /* INPUT_LATCH */ |
| return s->inputs; |
| |
| case 0x04: /* OUTPUT_REG */ |
| return s->outputs; |
| |
| case 0x08: /* IO_CNTL */ |
| return s->dir; |
| |
| case 0x10: /* KBR_LATCH */ |
| return s->row_latch; |
| |
| case 0x14: /* KBC_REG */ |
| return s->cols; |
| |
| case 0x18: /* GPIO_EVENT_MODE_REG */ |
| return s->event; |
| |
| case 0x1c: /* GPIO_INT_EDGE_REG */ |
| return s->edge; |
| |
| case 0x20: /* KBD_INT */ |
| return (~s->row_latch & 0x1f) && !s->kbd_mask; |
| |
| case 0x24: /* GPIO_INT */ |
| ret = s->ints; |
| s->ints &= s->mask; |
| if (ret) |
| qemu_irq_lower(s->irq); |
| return ret; |
| |
| case 0x28: /* KBD_MASKIT */ |
| return s->kbd_mask; |
| |
| case 0x2c: /* GPIO_MASKIT */ |
| return s->mask; |
| |
| case 0x30: /* GPIO_DEBOUNCING_REG */ |
| return s->debounce; |
| |
| case 0x34: /* GPIO_LATCH_REG */ |
| return s->latch; |
| } |
| |
| OMAP_BAD_REG(addr); |
| return 0; |
| } |
| |
| static void omap_mpuio_write(void *opaque, hwaddr addr, |
| uint64_t value, unsigned size) |
| { |
| struct omap_mpuio_s *s = opaque; |
| int offset = addr & OMAP_MPUI_REG_MASK; |
| uint16_t diff; |
| int ln; |
| |
| if (size != 2) { |
| omap_badwidth_write16(opaque, addr, value); |
| return; |
| } |
| |
| switch (offset) { |
| case 0x04: /* OUTPUT_REG */ |
| diff = (s->outputs ^ value) & ~s->dir; |
| s->outputs = value; |
| while ((ln = ctz32(diff)) != 32) { |
| if (s->handler[ln]) |
| qemu_set_irq(s->handler[ln], (value >> ln) & 1); |
| diff &= ~(1 << ln); |
| } |
| break; |
| |
| case 0x08: /* IO_CNTL */ |
| diff = s->outputs & (s->dir ^ value); |
| s->dir = value; |
| |
| value = s->outputs & ~s->dir; |
| while ((ln = ctz32(diff)) != 32) { |
| if (s->handler[ln]) |
| qemu_set_irq(s->handler[ln], (value >> ln) & 1); |
| diff &= ~(1 << ln); |
| } |
| break; |
| |
| case 0x14: /* KBC_REG */ |
| s->cols = value; |
| omap_mpuio_kbd_update(s); |
| break; |
| |
| case 0x18: /* GPIO_EVENT_MODE_REG */ |
| s->event = value & 0x1f; |
| break; |
| |
| case 0x1c: /* GPIO_INT_EDGE_REG */ |
| s->edge = value; |
| break; |
| |
| case 0x28: /* KBD_MASKIT */ |
| s->kbd_mask = value & 1; |
| omap_mpuio_kbd_update(s); |
| break; |
| |
| case 0x2c: /* GPIO_MASKIT */ |
| s->mask = value; |
| break; |
| |
| case 0x30: /* GPIO_DEBOUNCING_REG */ |
| s->debounce = value & 0x1ff; |
| break; |
| |
| case 0x00: /* INPUT_LATCH */ |
| case 0x10: /* KBR_LATCH */ |
| case 0x20: /* KBD_INT */ |
| case 0x24: /* GPIO_INT */ |
| case 0x34: /* GPIO_LATCH_REG */ |
| OMAP_RO_REG(addr); |
| return; |
| |
| default: |
| OMAP_BAD_REG(addr); |
| return; |
| } |
| } |
| |
| static const MemoryRegionOps omap_mpuio_ops = { |
| .read = omap_mpuio_read, |
| .write = omap_mpuio_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static void omap_mpuio_reset(struct omap_mpuio_s *s) |
| { |
| s->inputs = 0; |
| s->outputs = 0; |
| s->dir = ~0; |
| s->event = 0; |
| s->edge = 0; |
| s->kbd_mask = 0; |
| s->mask = 0; |
| s->debounce = 0; |
| s->latch = 0; |
| s->ints = 0; |
| s->row_latch = 0x1f; |
| s->clk = 1; |
| } |
| |
| static void omap_mpuio_onoff(void *opaque, int line, int on) |
| { |
| struct omap_mpuio_s *s = opaque; |
| |
| s->clk = on; |
| if (on) |
| omap_mpuio_kbd_update(s); |
| } |
| |
| static struct omap_mpuio_s *omap_mpuio_init(MemoryRegion *memory, |
| hwaddr base, |
| qemu_irq kbd_int, qemu_irq gpio_int, qemu_irq wakeup, |
| omap_clk clk) |
| { |
| struct omap_mpuio_s *s = g_new0(struct omap_mpuio_s, 1); |
| |
| s->irq = gpio_int; |
| s->kbd_irq = kbd_int; |
| s->wakeup = wakeup; |
| s->in = qemu_allocate_irqs(omap_mpuio_set, s, 16); |
| omap_mpuio_reset(s); |
| |
| memory_region_init_io(&s->iomem, NULL, &omap_mpuio_ops, s, |
| "omap-mpuio", 0x800); |
| memory_region_add_subregion(memory, base, &s->iomem); |
| |
| omap_clk_adduser(clk, qemu_allocate_irq(omap_mpuio_onoff, s, 0)); |
| |
| return s; |
| } |
| |
| qemu_irq *omap_mpuio_in_get(struct omap_mpuio_s *s) |
| { |
| return s->in; |
| } |
| |
| void omap_mpuio_out_set(struct omap_mpuio_s *s, int line, qemu_irq handler) |
| { |
| if (line >= 16 || line < 0) |
| hw_error("%s: No GPIO line %i\n", __func__, line); |
| s->handler[line] = handler; |
| } |
| |
| void omap_mpuio_key(struct omap_mpuio_s *s, int row, int col, int down) |
| { |
| if (row >= 5 || row < 0) |
| hw_error("%s: No key %i-%i\n", __func__, col, row); |
| |
| if (down) |
| s->buttons[row] |= 1 << col; |
| else |
| s->buttons[row] &= ~(1 << col); |
| |
| omap_mpuio_kbd_update(s); |
| } |
| |
| /* MicroWire Interface */ |
| struct omap_uwire_s { |
| MemoryRegion iomem; |
| qemu_irq txirq; |
| qemu_irq rxirq; |
| qemu_irq txdrq; |
| |
| uint16_t txbuf; |
| uint16_t rxbuf; |
| uint16_t control; |
| uint16_t setup[5]; |
| |
| uWireSlave *chip[4]; |
| }; |
| |
| static void omap_uwire_transfer_start(struct omap_uwire_s *s) |
| { |
| int chipselect = (s->control >> 10) & 3; /* INDEX */ |
| uWireSlave *slave = s->chip[chipselect]; |
| |
| if ((s->control >> 5) & 0x1f) { /* NB_BITS_WR */ |
| if (s->control & (1 << 12)) /* CS_CMD */ |
| if (slave && slave->send) |
| slave->send(slave->opaque, |
| s->txbuf >> (16 - ((s->control >> 5) & 0x1f))); |
| s->control &= ~(1 << 14); /* CSRB */ |
| /* TODO: depending on s->setup[4] bits [1:0] assert an IRQ or |
| * a DRQ. When is the level IRQ supposed to be reset? */ |
| } |
| |
| if ((s->control >> 0) & 0x1f) { /* NB_BITS_RD */ |
| if (s->control & (1 << 12)) /* CS_CMD */ |
| if (slave && slave->receive) |
| s->rxbuf = slave->receive(slave->opaque); |
| s->control |= 1 << 15; /* RDRB */ |
| /* TODO: depending on s->setup[4] bits [1:0] assert an IRQ or |
| * a DRQ. When is the level IRQ supposed to be reset? */ |
| } |
| } |
| |
| static uint64_t omap_uwire_read(void *opaque, hwaddr addr, unsigned size) |
| { |
| struct omap_uwire_s *s = opaque; |
| int offset = addr & OMAP_MPUI_REG_MASK; |
| |
| if (size != 2) { |
| return omap_badwidth_read16(opaque, addr); |
| } |
| |
| switch (offset) { |
| case 0x00: /* RDR */ |
| s->control &= ~(1 << 15); /* RDRB */ |
| return s->rxbuf; |
| |
| case 0x04: /* CSR */ |
| return s->control; |
| |
| case 0x08: /* SR1 */ |
| return s->setup[0]; |
| case 0x0c: /* SR2 */ |
| return s->setup[1]; |
| case 0x10: /* SR3 */ |
| return s->setup[2]; |
| case 0x14: /* SR4 */ |
| return s->setup[3]; |
| case 0x18: /* SR5 */ |
| return s->setup[4]; |
| } |
| |
| OMAP_BAD_REG(addr); |
| return 0; |
| } |
| |
| static void omap_uwire_write(void *opaque, hwaddr addr, |
| uint64_t value, unsigned size) |
| { |
| struct omap_uwire_s *s = opaque; |
| int offset = addr & OMAP_MPUI_REG_MASK; |
| |
| if (size != 2) { |
| omap_badwidth_write16(opaque, addr, value); |
| return; |
| } |
| |
| switch (offset) { |
| case 0x00: /* TDR */ |
| s->txbuf = value; /* TD */ |
| if ((s->setup[4] & (1 << 2)) && /* AUTO_TX_EN */ |
| ((s->setup[4] & (1 << 3)) || /* CS_TOGGLE_TX_EN */ |
| (s->control & (1 << 12)))) { /* CS_CMD */ |
| s->control |= 1 << 14; /* CSRB */ |
| omap_uwire_transfer_start(s); |
| } |
| break; |
| |
| case 0x04: /* CSR */ |
| s->control = value & 0x1fff; |
| if (value & (1 << 13)) /* START */ |
| omap_uwire_transfer_start(s); |
| break; |
| |
| case 0x08: /* SR1 */ |
| s->setup[0] = value & 0x003f; |
| break; |
| |
| case 0x0c: /* SR2 */ |
| s->setup[1] = value & 0x0fc0; |
| break; |
| |
| case 0x10: /* SR3 */ |
| s->setup[2] = value & 0x0003; |
| break; |
| |
| case 0x14: /* SR4 */ |
| s->setup[3] = value & 0x0001; |
| break; |
| |
| case 0x18: /* SR5 */ |
| s->setup[4] = value & 0x000f; |
| break; |
| |
| default: |
| OMAP_BAD_REG(addr); |
| return; |
| } |
| } |
| |
| static const MemoryRegionOps omap_uwire_ops = { |
| .read = omap_uwire_read, |
| .write = omap_uwire_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static void omap_uwire_reset(struct omap_uwire_s *s) |
| { |
| s->control = 0; |
| s->setup[0] = 0; |
| s->setup[1] = 0; |
| s->setup[2] = 0; |
| s->setup[3] = 0; |
| s->setup[4] = 0; |
| } |
| |
| static struct omap_uwire_s *omap_uwire_init(MemoryRegion *system_memory, |
| hwaddr base, |
| qemu_irq txirq, qemu_irq rxirq, |
| qemu_irq dma, |
| omap_clk clk) |
| { |
| struct omap_uwire_s *s = g_new0(struct omap_uwire_s, 1); |
| |
| s->txirq = txirq; |
| s->rxirq = rxirq; |
| s->txdrq = dma; |
| omap_uwire_reset(s); |
| |
| memory_region_init_io(&s->iomem, NULL, &omap_uwire_ops, s, "omap-uwire", 0x800); |
| memory_region_add_subregion(system_memory, base, &s->iomem); |
| |
| return s; |
| } |
| |
| void omap_uwire_attach(struct omap_uwire_s *s, |
| uWireSlave *slave, int chipselect) |
| { |
| if (chipselect < 0 || chipselect > 3) { |
| error_report("%s: Bad chipselect %i", __func__, chipselect); |
| exit(-1); |
| } |
| |
| s->chip[chipselect] = slave; |
| } |
| |
| /* Pseudonoise Pulse-Width Light Modulator */ |
| struct omap_pwl_s { |
| MemoryRegion iomem; |
| uint8_t output; |
| uint8_t level; |
| uint8_t enable; |
| int clk; |
| }; |
| |
| static void omap_pwl_update(struct omap_pwl_s *s) |
| { |
| int output = (s->clk && s->enable) ? s->level : 0; |
| |
| if (output != s->output) { |
| s->output = output; |
| printf("%s: Backlight now at %i/256\n", __func__, output); |
| } |
| } |
| |
| static uint64_t omap_pwl_read(void *opaque, hwaddr addr, unsigned size) |
| { |
| struct omap_pwl_s *s = opaque; |
| int offset = addr & OMAP_MPUI_REG_MASK; |
| |
| if (size != 1) { |
| return omap_badwidth_read8(opaque, addr); |
| } |
| |
| switch (offset) { |
| case 0x00: /* PWL_LEVEL */ |
| return s->level; |
| case 0x04: /* PWL_CTRL */ |
| return s->enable; |
| } |
| OMAP_BAD_REG(addr); |
| return 0; |
| } |
| |
| static void omap_pwl_write(void *opaque, hwaddr addr, |
| uint64_t value, unsigned size) |
| { |
| struct omap_pwl_s *s = opaque; |
| int offset = addr & OMAP_MPUI_REG_MASK; |
| |
| if (size != 1) { |
| omap_badwidth_write8(opaque, addr, value); |
| return; |
| } |
| |
| switch (offset) { |
| case 0x00: /* PWL_LEVEL */ |
| s->level = value; |
| omap_pwl_update(s); |
| break; |
| case 0x04: /* PWL_CTRL */ |
| s->enable = value & 1; |
| omap_pwl_update(s); |
| break; |
| default: |
| OMAP_BAD_REG(addr); |
| return; |
| } |
| } |
| |
| static const MemoryRegionOps omap_pwl_ops = { |
| .read = omap_pwl_read, |
| .write = omap_pwl_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static void omap_pwl_reset(struct omap_pwl_s *s) |
| { |
| s->output = 0; |
| s->level = 0; |
| s->enable = 0; |
| s->clk = 1; |
| omap_pwl_update(s); |
| } |
| |
| static void omap_pwl_clk_update(void *opaque, int line, int on) |
| { |
| struct omap_pwl_s *s = opaque; |
| |
| s->clk = on; |
| omap_pwl_update(s); |
| } |
| |
| static struct omap_pwl_s *omap_pwl_init(MemoryRegion *system_memory, |
| hwaddr base, |
| omap_clk clk) |
| { |
| struct omap_pwl_s *s = g_malloc0(sizeof(*s)); |
| |
| omap_pwl_reset(s); |
| |
| memory_region_init_io(&s->iomem, NULL, &omap_pwl_ops, s, |
| "omap-pwl", 0x800); |
| memory_region_add_subregion(system_memory, base, &s->iomem); |
| |
| omap_clk_adduser(clk, qemu_allocate_irq(omap_pwl_clk_update, s, 0)); |
| return s; |
| } |
| |
| /* Pulse-Width Tone module */ |
| struct omap_pwt_s { |
| MemoryRegion iomem; |
| uint8_t frc; |
| uint8_t vrc; |
| uint8_t gcr; |
| omap_clk clk; |
| }; |
| |
| static uint64_t omap_pwt_read(void *opaque, hwaddr addr, unsigned size) |
| { |
| struct omap_pwt_s *s = opaque; |
| int offset = addr & OMAP_MPUI_REG_MASK; |
| |
| if (size != 1) { |
| return omap_badwidth_read8(opaque, addr); |
| } |
| |
| switch (offset) { |
| case 0x00: /* FRC */ |
| return s->frc; |
| case 0x04: /* VCR */ |
| return s->vrc; |
| case 0x08: /* GCR */ |
| return s->gcr; |
| } |
| OMAP_BAD_REG(addr); |
| return 0; |
| } |
| |
| static void omap_pwt_write(void *opaque, hwaddr addr, |
| uint64_t value, unsigned size) |
| { |
| struct omap_pwt_s *s = opaque; |
| int offset = addr & OMAP_MPUI_REG_MASK; |
| |
| if (size != 1) { |
| omap_badwidth_write8(opaque, addr, value); |
| return; |
| } |
| |
| switch (offset) { |
| case 0x00: /* FRC */ |
| s->frc = value & 0x3f; |
| break; |
| case 0x04: /* VRC */ |
| if ((value ^ s->vrc) & 1) { |
| if (value & 1) |
| printf("%s: %iHz buzz on\n", __func__, (int) |
| /* 1.5 MHz from a 12-MHz or 13-MHz PWT_CLK */ |
| ((omap_clk_getrate(s->clk) >> 3) / |
| /* Pre-multiplexer divider */ |
| ((s->gcr & 2) ? 1 : 154) / |
| /* Octave multiplexer */ |
| (2 << (value & 3)) * |
| /* 101/107 divider */ |
| ((value & (1 << 2)) ? 101 : 107) * |
| /* 49/55 divider */ |
| ((value & (1 << 3)) ? 49 : 55) * |
| /* 50/63 divider */ |
| ((value & (1 << 4)) ? 50 : 63) * |
| /* 80/127 divider */ |
| ((value & (1 << 5)) ? 80 : 127) / |
| (107 * 55 * 63 * 127))); |
| else |
| printf("%s: silence!\n", __func__); |
| } |
| s->vrc = value & 0x7f; |
| break; |
| case 0x08: /* GCR */ |
| s->gcr = value & 3; |
| break; |
| default: |
| OMAP_BAD_REG(addr); |
| return; |
| } |
| } |
| |
| static const MemoryRegionOps omap_pwt_ops = { |
| .read =omap_pwt_read, |
| .write = omap_pwt_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static void omap_pwt_reset(struct omap_pwt_s *s) |
| { |
| s->frc = 0; |
| s->vrc = 0; |
| s->gcr = 0; |
| } |
| |
| static struct omap_pwt_s *omap_pwt_init(MemoryRegion *system_memory, |
| hwaddr base, |
| omap_clk clk) |
| { |
| struct omap_pwt_s *s = g_malloc0(sizeof(*s)); |
| s->clk = clk; |
| omap_pwt_reset(s); |
| |
| memory_region_init_io(&s->iomem, NULL, &omap_pwt_ops, s, |
| "omap-pwt", 0x800); |
| memory_region_add_subregion(system_memory, base, &s->iomem); |
| return s; |
| } |
| |
| /* Real-time Clock module */ |
| struct omap_rtc_s { |
| MemoryRegion iomem; |
| qemu_irq irq; |
| qemu_irq alarm; |
| QEMUTimer *clk; |
| |
| uint8_t interrupts; |
| uint8_t status; |
| int16_t comp_reg; |
| int running; |
| int pm_am; |
| int auto_comp; |
| int round; |
| struct tm alarm_tm; |
| time_t alarm_ti; |
| |
| struct tm current_tm; |
| time_t ti; |
| uint64_t tick; |
| }; |
| |
| static void omap_rtc_interrupts_update(struct omap_rtc_s *s) |
| { |
| /* s->alarm is level-triggered */ |
| qemu_set_irq(s->alarm, (s->status >> 6) & 1); |
| } |
| |
| static void omap_rtc_alarm_update(struct omap_rtc_s *s) |
| { |
| s->alarm_ti = mktimegm(&s->alarm_tm); |
| if (s->alarm_ti == -1) |
| printf("%s: conversion failed\n", __func__); |
| } |
| |
| static uint64_t omap_rtc_read(void *opaque, hwaddr addr, unsigned size) |
| { |
| struct omap_rtc_s *s = opaque; |
| int offset = addr & OMAP_MPUI_REG_MASK; |
| uint8_t i; |
| |
| if (size != 1) { |
| return omap_badwidth_read8(opaque, addr); |
| } |
| |
| switch (offset) { |
| case 0x00: /* SECONDS_REG */ |
| return to_bcd(s->current_tm.tm_sec); |
| |
| case 0x04: /* MINUTES_REG */ |
| return to_bcd(s->current_tm.tm_min); |
| |
| case 0x08: /* HOURS_REG */ |
| if (s->pm_am) |
| return ((s->current_tm.tm_hour > 11) << 7) | |
| to_bcd(((s->current_tm.tm_hour - 1) % 12) + 1); |
| else |
| return to_bcd(s->current_tm.tm_hour); |
| |
| case 0x0c: /* DAYS_REG */ |
| return to_bcd(s->current_tm.tm_mday); |
| |
| case 0x10: /* MONTHS_REG */ |
| return to_bcd(s->current_tm.tm_mon + 1); |
| |
| case 0x14: /* YEARS_REG */ |
| return to_bcd(s->current_tm.tm_year % 100); |
| |
| case 0x18: /* WEEK_REG */ |
| return s->current_tm.tm_wday; |
| |
| case 0x20: /* ALARM_SECONDS_REG */ |
| return to_bcd(s->alarm_tm.tm_sec); |
| |
| case 0x24: /* ALARM_MINUTES_REG */ |
| return to_bcd(s->alarm_tm.tm_min); |
| |
| case 0x28: /* ALARM_HOURS_REG */ |
| if (s->pm_am) |
| return ((s->alarm_tm.tm_hour > 11) << 7) | |
| to_bcd(((s->alarm_tm.tm_hour - 1) % 12) + 1); |
| else |
| return to_bcd(s->alarm_tm.tm_hour); |
| |
| case 0x2c: /* ALARM_DAYS_REG */ |
| return to_bcd(s->alarm_tm.tm_mday); |
| |
| case 0x30: /* ALARM_MONTHS_REG */ |
| return to_bcd(s->alarm_tm.tm_mon + 1); |
| |
| case 0x34: /* ALARM_YEARS_REG */ |
| return to_bcd(s->alarm_tm.tm_year % 100); |
| |
| case 0x40: /* RTC_CTRL_REG */ |
| return (s->pm_am << 3) | (s->auto_comp << 2) | |
| (s->round << 1) | s->running; |
| |
| case 0x44: /* RTC_STATUS_REG */ |
| i = s->status; |
| s->status &= ~0x3d; |
| return i; |
| |
| case 0x48: /* RTC_INTERRUPTS_REG */ |
| return s->interrupts; |
| |
| case 0x4c: /* RTC_COMP_LSB_REG */ |
| return ((uint16_t) s->comp_reg) & 0xff; |
| |
| case 0x50: /* RTC_COMP_MSB_REG */ |
| return ((uint16_t) s->comp_reg) >> 8; |
| } |
| |
| OMAP_BAD_REG(addr); |
| return 0; |
| } |
| |
| static void omap_rtc_write(void *opaque, hwaddr addr, |
| uint64_t value, unsigned size) |
| { |
| struct omap_rtc_s *s = opaque; |
| int offset = addr & OMAP_MPUI_REG_MASK; |
| struct tm new_tm; |
| time_t ti[2]; |
| |
| if (size != 1) { |
| omap_badwidth_write8(opaque, addr, value); |
| return; |
| } |
| |
| switch (offset) { |
| case 0x00: /* SECONDS_REG */ |
| #ifdef ALMDEBUG |
| printf("RTC SEC_REG <-- %02x\n", value); |
| #endif |
| s->ti -= s->current_tm.tm_sec; |
| s->ti += from_bcd(value); |
| return; |
| |
| case 0x04: /* MINUTES_REG */ |
| #ifdef ALMDEBUG |
| printf("RTC MIN_REG <-- %02x\n", value); |
| #endif |
| s->ti -= s->current_tm.tm_min * 60; |
| s->ti += from_bcd(value) * 60; |
| return; |
| |
| case 0x08: /* HOURS_REG */ |
| #ifdef ALMDEBUG |
| printf("RTC HRS_REG <-- %02x\n", value); |
| #endif |
| s->ti -= s->current_tm.tm_hour * 3600; |
| if (s->pm_am) { |
| s->ti += (from_bcd(value & 0x3f) & 12) * 3600; |
| s->ti += ((value >> 7) & 1) * 43200; |
| } else |
| s->ti += from_bcd(value & 0x3f) * 3600; |
| return; |
| |
| case 0x0c: /* DAYS_REG */ |
| #ifdef ALMDEBUG |
| printf("RTC DAY_REG <-- %02x\n", value); |
| #endif |
| s->ti -= s->current_tm.tm_mday * 86400; |
| s->ti += from_bcd(value) * 86400; |
| return; |
| |
| case 0x10: /* MONTHS_REG */ |
| #ifdef ALMDEBUG |
| printf("RTC MTH_REG <-- %02x\n", value); |
| #endif |
| memcpy(&new_tm, &s->current_tm, sizeof(new_tm)); |
| new_tm.tm_mon = from_bcd(value); |
| ti[0] = mktimegm(&s->current_tm); |
| ti[1] = mktimegm(&new_tm); |
| |
| if (ti[0] != -1 && ti[1] != -1) { |
| s->ti -= ti[0]; |
| s->ti += ti[1]; |
| } else { |
| /* A less accurate version */ |
| s->ti -= s->current_tm.tm_mon * 2592000; |
| s->ti += from_bcd(value) * 2592000; |
| } |
| return; |
| |
| case 0x14: /* YEARS_REG */ |
| #ifdef ALMDEBUG |
| printf("RTC YRS_REG <-- %02x\n", value); |
| #endif |
| memcpy(&new_tm, &s->current_tm, sizeof(new_tm)); |
| new_tm.tm_year += from_bcd(value) - (new_tm.tm_year % 100); |
| ti[0] = mktimegm(&s->current_tm); |
| ti[1] = mktimegm(&new_tm); |
| |
| if (ti[0] != -1 && ti[1] != -1) { |
| s->ti -= ti[0]; |
| s->ti += ti[1]; |
| } else { |
| /* A less accurate version */ |
| s->ti -= (time_t)(s->current_tm.tm_year % 100) * 31536000; |
| s->ti += (time_t)from_bcd(value) * 31536000; |
| } |
| return; |
| |
| case 0x18: /* WEEK_REG */ |
| return; /* Ignored */ |
| |
| case 0x20: /* ALARM_SECONDS_REG */ |
| #ifdef ALMDEBUG |
| printf("ALM SEC_REG <-- %02x\n", value); |
| #endif |
| s->alarm_tm.tm_sec = from_bcd(value); |
| omap_rtc_alarm_update(s); |
| return; |
| |
| case 0x24: /* ALARM_MINUTES_REG */ |
| #ifdef ALMDEBUG |
| printf("ALM MIN_REG <-- %02x\n", value); |
| #endif |
| s->alarm_tm.tm_min = from_bcd(value); |
| omap_rtc_alarm_update(s); |
| return; |
| |
| case 0x28: /* ALARM_HOURS_REG */ |
| #ifdef ALMDEBUG |
| printf("ALM HRS_REG <-- %02x\n", value); |
| #endif |
| if (s->pm_am) |
| s->alarm_tm.tm_hour = |
| ((from_bcd(value & 0x3f)) % 12) + |
| ((value >> 7) & 1) * 12; |
| else |
| s->alarm_tm.tm_hour = from_bcd(value); |
| omap_rtc_alarm_update(s); |
| return; |
| |
| case 0x2c: /* ALARM_DAYS_REG */ |
| #ifdef ALMDEBUG |
| printf("ALM DAY_REG <-- %02x\n", value); |
| #endif |
| s->alarm_tm.tm_mday = from_bcd(value); |
| omap_rtc_alarm_update(s); |
| return; |
| |
| case 0x30: /* ALARM_MONTHS_REG */ |
| #ifdef ALMDEBUG |
| printf("ALM MON_REG <-- %02x\n", value); |
| #endif |
| s->alarm_tm.tm_mon = from_bcd(value); |
| omap_rtc_alarm_update(s); |
| return; |
| |
| case 0x34: /* ALARM_YEARS_REG */ |
| #ifdef ALMDEBUG |
| printf("ALM YRS_REG <-- %02x\n", value); |
| #endif |
| s->alarm_tm.tm_year = from_bcd(value); |
| omap_rtc_alarm_update(s); |
| return; |
| |
| case 0x40: /* RTC_CTRL_REG */ |
| #ifdef ALMDEBUG |
| printf("RTC CONTROL <-- %02x\n", value); |
| #endif |
| s->pm_am = (value >> 3) & 1; |
| s->auto_comp = (value >> 2) & 1; |
| s->round = (value >> 1) & 1; |
| s->running = value & 1; |
| s->status &= 0xfd; |
| s->status |= s->running << 1; |
| return; |
| |
| case 0x44: /* RTC_STATUS_REG */ |
| #ifdef ALMDEBUG |
| printf("RTC STATUSL <-- %02x\n", value); |
| #endif |
| s->status &= ~((value & 0xc0) ^ 0x80); |
| omap_rtc_interrupts_update(s); |
| return; |
| |
| case 0x48: /* RTC_INTERRUPTS_REG */ |
| #ifdef ALMDEBUG |
| printf("RTC INTRS <-- %02x\n", value); |
| #endif |
| s->interrupts = value; |
| return; |
| |
| case 0x4c: /* RTC_COMP_LSB_REG */ |
| #ifdef ALMDEBUG |
| printf("RTC COMPLSB <-- %02x\n", value); |
| #endif |
| s->comp_reg &= 0xff00; |
| s->comp_reg |= 0x00ff & value; |
| return; |
| |
| case 0x50: /* RTC_COMP_MSB_REG */ |
| #ifdef ALMDEBUG |
| printf("RTC COMPMSB <-- %02x\n", value); |
| #endif |
| s->comp_reg &= 0x00ff; |
| s->comp_reg |= 0xff00 & (value << 8); |
| return; |
| |
| default: |
| OMAP_BAD_REG(addr); |
| return; |
| } |
| } |
| |
| static const MemoryRegionOps omap_rtc_ops = { |
| .read = omap_rtc_read, |
| .write = omap_rtc_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static void omap_rtc_tick(void *opaque) |
| { |
| struct omap_rtc_s *s = opaque; |
| |
| if (s->round) { |
| /* Round to nearest full minute. */ |
| if (s->current_tm.tm_sec < 30) |
| s->ti -= s->current_tm.tm_sec; |
| else |
| s->ti += 60 - s->current_tm.tm_sec; |
| |
| s->round = 0; |
| } |
| |
| localtime_r(&s->ti, &s->current_tm); |
| |
| if ((s->interrupts & 0x08) && s->ti == s->alarm_ti) { |
| s->status |= 0x40; |
| omap_rtc_interrupts_update(s); |
| } |
| |
| if (s->interrupts & 0x04) |
| switch (s->interrupts & 3) { |
| case 0: |
| s->status |= 0x04; |
| qemu_irq_pulse(s->irq); |
| break; |
| case 1: |
| if (s->current_tm.tm_sec) |
| break; |
| s->status |= 0x08; |
| qemu_irq_pulse(s->irq); |
| break; |
| case 2: |
| if (s->current_tm.tm_sec || s->current_tm.tm_min) |
| break; |
| s->status |= 0x10; |
| qemu_irq_pulse(s->irq); |
| break; |
| case 3: |
| if (s->current_tm.tm_sec || |
| s->current_tm.tm_min || s->current_tm.tm_hour) |
| break; |
| s->status |= 0x20; |
| qemu_irq_pulse(s->irq); |
| break; |
| } |
| |
| /* Move on */ |
| if (s->running) |
| s->ti ++; |
| s->tick += 1000; |
| |
| /* |
| * Every full hour add a rough approximation of the compensation |
| * register to the 32kHz Timer (which drives the RTC) value. |
| */ |
| if (s->auto_comp && !s->current_tm.tm_sec && !s->current_tm.tm_min) |
| s->tick += s->comp_reg * 1000 / 32768; |
| |
| timer_mod(s->clk, s->tick); |
| } |
| |
| static void omap_rtc_reset(struct omap_rtc_s *s) |
| { |
| struct tm tm; |
| |
| s->interrupts = 0; |
| s->comp_reg = 0; |
| s->running = 0; |
| s->pm_am = 0; |
| s->auto_comp = 0; |
| s->round = 0; |
| s->tick = qemu_clock_get_ms(rtc_clock); |
| memset(&s->alarm_tm, 0, sizeof(s->alarm_tm)); |
| s->alarm_tm.tm_mday = 0x01; |
| s->status = 1 << 7; |
| qemu_get_timedate(&tm, 0); |
| s->ti = mktimegm(&tm); |
| |
| omap_rtc_alarm_update(s); |
| omap_rtc_tick(s); |
| } |
| |
| static struct omap_rtc_s *omap_rtc_init(MemoryRegion *system_memory, |
| hwaddr base, |
| qemu_irq timerirq, qemu_irq alarmirq, |
| omap_clk clk) |
| { |
| struct omap_rtc_s *s = g_new0(struct omap_rtc_s, 1); |
| |
| s->irq = timerirq; |
| s->alarm = alarmirq; |
| s->clk = timer_new_ms(rtc_clock, omap_rtc_tick, s); |
| |
| omap_rtc_reset(s); |
| |
| memory_region_init_io(&s->iomem, NULL, &omap_rtc_ops, s, |
| "omap-rtc", 0x800); |
| memory_region_add_subregion(system_memory, base, &s->iomem); |
| |
| return s; |
| } |
| |
| /* Multi-channel Buffered Serial Port interfaces */ |
| struct omap_mcbsp_s { |
| MemoryRegion iomem; |
| qemu_irq txirq; |
| qemu_irq rxirq; |
| qemu_irq txdrq; |
| qemu_irq rxdrq; |
| |
| uint16_t spcr[2]; |
| uint16_t rcr[2]; |
| uint16_t xcr[2]; |
| uint16_t srgr[2]; |
| uint16_t mcr[2]; |
| uint16_t pcr; |
| uint16_t rcer[8]; |
| uint16_t xcer[8]; |
| int tx_rate; |
| int rx_rate; |
| int tx_req; |
| int rx_req; |
| |
| I2SCodec *codec; |
| QEMUTimer *source_timer; |
| QEMUTimer *sink_timer; |
| }; |
| |
| static void omap_mcbsp_intr_update(struct omap_mcbsp_s *s) |
| { |
| int irq; |
| |
| switch ((s->spcr[0] >> 4) & 3) { /* RINTM */ |
| case 0: |
| irq = (s->spcr[0] >> 1) & 1; /* RRDY */ |
| break; |
| case 3: |
| irq = (s->spcr[0] >> 3) & 1; /* RSYNCERR */ |
| break; |
| default: |
| irq = 0; |
| break; |
| } |
| |
| if (irq) |
| qemu_irq_pulse(s->rxirq); |
| |
| switch ((s->spcr[1] >> 4) & 3) { /* XINTM */ |
| case 0: |
| irq = (s->spcr[1] >> 1) & 1; /* XRDY */ |
| break; |
| case 3: |
| irq = (s->spcr[1] >> 3) & 1; /* XSYNCERR */ |
| break; |
| default: |
| irq = 0; |
| break; |
| } |
| |
| if (irq) |
| qemu_irq_pulse(s->txirq); |
| } |
| |
| static void omap_mcbsp_rx_newdata(struct omap_mcbsp_s *s) |
| { |
| if ((s->spcr[0] >> 1) & 1) /* RRDY */ |
| s->spcr[0] |= 1 << 2; /* RFULL */ |
| s->spcr[0] |= 1 << 1; /* RRDY */ |
| qemu_irq_raise(s->rxdrq); |
| omap_mcbsp_intr_update(s); |
| } |
| |
| static void omap_mcbsp_source_tick(void *opaque) |
| { |
| struct omap_mcbsp_s *s = opaque; |
| static const int bps[8] = { 0, 1, 1, 2, 2, 2, -255, -255 }; |
| |
| if (!s->rx_rate) |
| return; |
| if (s->rx_req) |
| printf("%s: Rx FIFO overrun\n", __func__); |
| |
| s->rx_req = s->rx_rate << bps[(s->rcr[0] >> 5) & 7]; |
| |
| omap_mcbsp_rx_newdata(s); |
| timer_mod(s->source_timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + |
| NANOSECONDS_PER_SECOND); |
| } |
| |
| static void omap_mcbsp_rx_start(struct omap_mcbsp_s *s) |
| { |
| if (!s->codec || !s->codec->rts) |
| omap_mcbsp_source_tick(s); |
| else if (s->codec->in.len) { |
| s->rx_req = s->codec->in.len; |
| omap_mcbsp_rx_newdata(s); |
| } |
| } |
| |
| static void omap_mcbsp_rx_stop(struct omap_mcbsp_s *s) |
| { |
| timer_del(s->source_timer); |
| } |
| |
| static void omap_mcbsp_rx_done(struct omap_mcbsp_s *s) |
| { |
| s->spcr[0] &= ~(1 << 1); /* RRDY */ |
| qemu_irq_lower(s->rxdrq); |
| omap_mcbsp_intr_update(s); |
| } |
| |
| static void omap_mcbsp_tx_newdata(struct omap_mcbsp_s *s) |
| { |
| s->spcr[1] |= 1 << 1; /* XRDY */ |
| qemu_irq_raise(s->txdrq); |
| omap_mcbsp_intr_update(s); |
| } |
| |
| static void omap_mcbsp_sink_tick(void *opaque) |
| { |
| struct omap_mcbsp_s *s = opaque; |
| static const int bps[8] = { 0, 1, 1, 2, 2, 2, -255, -255 }; |
| |
| if (!s->tx_rate) |
| return; |
| if (s->tx_req) |
| printf("%s: Tx FIFO underrun\n", __func__); |
| |
| s->tx_req = s->tx_rate << bps[(s->xcr[0] >> 5) & 7]; |
| |
| omap_mcbsp_tx_newdata(s); |
| timer_mod(s->sink_timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + |
| NANOSECONDS_PER_SECOND); |
| } |
| |
| static void omap_mcbsp_tx_start(struct omap_mcbsp_s *s) |
| { |
| if (!s->codec || !s->codec->cts) |
| omap_mcbsp_sink_tick(s); |
| else if (s->codec->out.size) { |
| s->tx_req = s->codec->out.size; |
| omap_mcbsp_tx_newdata(s); |
| } |
| } |
| |
| static void omap_mcbsp_tx_done(struct omap_mcbsp_s *s) |
| { |
| s->spcr[1] &= ~(1 << 1); /* XRDY */ |
| qemu_irq_lower(s->txdrq); |
| omap_mcbsp_intr_update(s); |
| if (s->codec && s->codec->cts) |
| s->codec->tx_swallow(s->codec->opaque); |
| } |
| |
| static void omap_mcbsp_tx_stop(struct omap_mcbsp_s *s) |
| { |
| s->tx_req = 0; |
| omap_mcbsp_tx_done(s); |
| timer_del(s->sink_timer); |
| } |
| |
| static void omap_mcbsp_req_update(struct omap_mcbsp_s *s) |
| { |
| int prev_rx_rate, prev_tx_rate; |
| int rx_rate = 0, tx_rate = 0; |
| int cpu_rate = 1500000; /* XXX */ |
| |
| /* TODO: check CLKSTP bit */ |
| if (s->spcr[1] & (1 << 6)) { /* GRST */ |
| if (s->spcr[0] & (1 << 0)) { /* RRST */ |
| if ((s->srgr[1] & (1 << 13)) && /* CLKSM */ |
| (s->pcr & (1 << 8))) { /* CLKRM */ |
| if (~s->pcr & (1 << 7)) /* SCLKME */ |
| rx_rate = cpu_rate / |
| ((s->srgr[0] & 0xff) + 1); /* CLKGDV */ |
| } else |
| if (s->codec) |
| rx_rate = s->codec->rx_rate; |
| } |
| |
| if (s->spcr[1] & (1 << 0)) { /* XRST */ |
| if ((s->srgr[1] & (1 << 13)) && /* CLKSM */ |
| (s->pcr & (1 << 9))) { /* CLKXM */ |
| if (~s->pcr & (1 << 7)) /* SCLKME */ |
| tx_rate = cpu_rate / |
| ((s->srgr[0] & 0xff) + 1); /* CLKGDV */ |
| } else |
| if (s->codec) |
| tx_rate = s->codec->tx_rate; |
| } |
| } |
| prev_tx_rate = s->tx_rate; |
| prev_rx_rate = s->rx_rate; |
| s->tx_rate = tx_rate; |
| s->rx_rate = rx_rate; |
| |
| if (s->codec) |
| s->codec->set_rate(s->codec->opaque, rx_rate, tx_rate); |
| |
| if (!prev_tx_rate && tx_rate) |
| omap_mcbsp_tx_start(s); |
| else if (s->tx_rate && !tx_rate) |
| omap_mcbsp_tx_stop(s); |
| |
| if (!prev_rx_rate && rx_rate) |
| omap_mcbsp_rx_start(s); |
| else if (prev_tx_rate && !tx_rate) |
| omap_mcbsp_rx_stop(s); |
| } |
| |
| static uint64_t omap_mcbsp_read(void *opaque, hwaddr addr, |
| unsigned size) |
| { |
| struct omap_mcbsp_s *s = opaque; |
| int offset = addr & OMAP_MPUI_REG_MASK; |
| uint16_t ret; |
| |
| if (size != 2) { |
| return omap_badwidth_read16(opaque, addr); |
| } |
| |
| switch (offset) { |
| case 0x00: /* DRR2 */ |
| if (((s->rcr[0] >> 5) & 7) < 3) /* RWDLEN1 */ |
| return 0x0000; |
| /* Fall through. */ |
| case 0x02: /* DRR1 */ |
| if (s->rx_req < 2) { |
| printf("%s: Rx FIFO underrun\n", __func__); |
| omap_mcbsp_rx_done(s); |
| } else { |
| s->tx_req -= 2; |
| if (s->codec && s->codec->in.len >= 2) { |
| ret = s->codec->in.fifo[s->codec->in.start ++] << 8; |
| ret |= s->codec->in.fifo[s->codec->in.start ++]; |
| s->codec->in.len -= 2; |
| } else |
| ret = 0x0000; |
| if (!s->tx_req) |
| omap_mcbsp_rx_done(s); |
| return ret; |
| } |
| return 0x0000; |
| |
| case 0x04: /* DXR2 */ |
| case 0x06: /* DXR1 */ |
| return 0x0000; |
| |
| case 0x08: /* SPCR2 */ |
| return s->spcr[1]; |
| case 0x0a: /* SPCR1 */ |
| return s->spcr[0]; |
| case 0x0c: /* RCR2 */ |
| return s->rcr[1]; |
| case 0x0e: /* RCR1 */ |
| return s->rcr[0]; |
| case 0x10: /* XCR2 */ |
| return s->xcr[1]; |
| case 0x12: /* XCR1 */ |
| return s->xcr[0]; |
| case 0x14: /* SRGR2 */ |
| return s->srgr[1]; |
| case 0x16: /* SRGR1 */ |
| return s->srgr[0]; |
| case 0x18: /* MCR2 */ |
| return s->mcr[1]; |
| case 0x1a: /* MCR1 */ |
| return s->mcr[0]; |
| case 0x1c: /* RCERA */ |
| return s->rcer[0]; |
| case 0x1e: /* RCERB */ |
| return s->rcer[1]; |
| case 0x20: /* XCERA */ |
| return s->xcer[0]; |
| case 0x22: /* XCERB */ |
| return s->xcer[1]; |
| case 0x24: /* PCR0 */ |
| return s->pcr; |
| case 0x26: /* RCERC */ |
| return s->rcer[2]; |
| case 0x28: /* RCERD */ |
| return s->rcer[3]; |
| case 0x2a: /* XCERC */ |
| return s->xcer[2]; |
| case 0x2c: /* XCERD */ |
| return s->xcer[3]; |
| case 0x2e: /* RCERE */ |
| return s->rcer[4]; |
| case 0x30: /* RCERF */ |
| return s->rcer[5]; |
| case 0x32: /* XCERE */ |
| return s->xcer[4]; |
| case 0x34: /* XCERF */ |
| return s->xcer[5]; |
| case 0x36: /* RCERG */ |
| return s->rcer[6]; |
| case 0x38: /* RCERH */ |
| return s->rcer[7]; |
| case 0x3a: /* XCERG */ |
| return s->xcer[6]; |
| case 0x3c: /* XCERH */ |
| return s->xcer[7]; |
| } |
| |
| OMAP_BAD_REG(addr); |
| return 0; |
| } |
| |
| static void omap_mcbsp_writeh(void *opaque, hwaddr addr, |
| uint32_t value) |
| { |
| struct omap_mcbsp_s *s = opaque; |
| int offset = addr & OMAP_MPUI_REG_MASK; |
| |
| switch (offset) { |
| case 0x00: /* DRR2 */ |
| case 0x02: /* DRR1 */ |
| OMAP_RO_REG(addr); |
| return; |
| |
| case 0x04: /* DXR2 */ |
| if (((s->xcr[0] >> 5) & 7) < 3) /* XWDLEN1 */ |
| return; |
| /* Fall through. */ |
| case 0x06: /* DXR1 */ |
| if (s->tx_req > 1) { |
| s->tx_req -= 2; |
| if (s->codec && s->codec->cts) { |
| s->codec->out.fifo[s->codec->out.len ++] = (value >> 8) & 0xff; |
| s->codec->out.fifo[s->codec->out.len ++] = (value >> 0) & 0xff; |
| } |
| if (s->tx_req < 2) |
| omap_mcbsp_tx_done(s); |
| } else |
| printf("%s: Tx FIFO overrun\n", __func__); |
| return; |
| |
| case 0x08: /* SPCR2 */ |
| s->spcr[1] &= 0x0002; |
| s->spcr[1] |= 0x03f9 & value; |
| s->spcr[1] |= 0x0004 & (value << 2); /* XEMPTY := XRST */ |
| if (~value & 1) /* XRST */ |
| s->spcr[1] &= ~6; |
| omap_mcbsp_req_update(s); |
| return; |
| case 0x0a: /* SPCR1 */ |
| s->spcr[0] &= 0x0006; |
| s->spcr[0] |= 0xf8f9 & value; |
| if (value & (1 << 15)) /* DLB */ |
| printf("%s: Digital Loopback mode enable attempt\n", __func__); |
| if (~value & 1) { /* RRST */ |
| s->spcr[0] &= ~6; |
| s->rx_req = 0; |
| omap_mcbsp_rx_done(s); |
| } |
| omap_mcbsp_req_update(s); |
| return; |
| |
| case 0x0c: /* RCR2 */ |
| s->rcr[1] = value & 0xffff; |
| return; |
| case 0x0e: /* RCR1 */ |
| s->rcr[0] = value & 0x7fe0; |
| return; |
| case 0x10: /* XCR2 */ |
| s->xcr[1] = value & 0xffff; |
| return; |
| case 0x12: /* XCR1 */ |
| s->xcr[0] = value & 0x7fe0; |
| return; |
| case 0x14: /* SRGR2 */ |
| s->srgr[1] = value & 0xffff; |
| omap_mcbsp_req_update(s); |
| return; |
| case 0x16: /* SRGR1 */ |
| s->srgr[0] = value & 0xffff; |
| omap_mcbsp_req_update(s); |
| return; |
| case 0x18: /* MCR2 */ |
| s->mcr[1] = value & 0x03e3; |
| if (value & 3) /* XMCM */ |
| printf("%s: Tx channel selection mode enable attempt\n", __func__); |
| return; |
| case 0x1a: /* MCR1 */ |
| s->mcr[0] = value & 0x03e1; |
| if (value & 1) /* RMCM */ |
| printf("%s: Rx channel selection mode enable attempt\n", __func__); |
| return; |
| case 0x1c: /* RCERA */ |
| s->rcer[0] = value & 0xffff; |
| return; |
| case 0x1e: /* RCERB */ |
| s->rcer[1] = value & 0xffff; |
| return; |
| case 0x20: /* XCERA */ |
| s->xcer[0] = value & 0xffff; |
| return; |
| case 0x22: /* XCERB */ |
| s->xcer[1] = value & 0xffff; |
| return; |
| case 0x24: /* PCR0 */ |
| s->pcr = value & 0x7faf; |
| return; |
| case 0x26: /* RCERC */ |
| s->rcer[2] = value & 0xffff; |
| return; |
| case 0x28: /* RCERD */ |
| s->rcer[3] = value & 0xffff; |
| return; |
| case 0x2a: /* XCERC */ |
| s->xcer[2] = value & 0xffff; |
| return; |
| case 0x2c: /* XCERD */ |
| s->xcer[3] = value & 0xffff; |
| return; |
| case 0x2e: /* RCERE */ |
| s->rcer[4] = value & 0xffff; |
| return; |
| case 0x30: /* RCERF */ |
| s->rcer[5] = value & 0xffff; |
| return; |
| case 0x32: /* XCERE */ |
| s->xcer[4] = value & 0xffff; |
| return; |
| case 0x34: /* XCERF */ |
| s->xcer[5] = value & 0xffff; |
| return; |
| case 0x36: /* RCERG */ |
| s->rcer[6] = value & 0xffff; |
| return; |
| case 0x38: /* RCERH */ |
| s->rcer[7] = value & 0xffff; |
| return; |
| case 0x3a: /* XCERG */ |
| s->xcer[6] = value & 0xffff; |
| return; |
| case 0x3c: /* XCERH */ |
| s->xcer[7] = value & 0xffff; |
| return; |
| } |
| |
| OMAP_BAD_REG(addr); |
| } |
| |
| static void omap_mcbsp_writew(void *opaque, hwaddr addr, |
| uint32_t value) |
| { |
| struct omap_mcbsp_s *s = opaque; |
| int offset = addr & OMAP_MPUI_REG_MASK; |
| |
| if (offset == 0x04) { /* DXR */ |
| if (((s->xcr[0] >> 5) & 7) < 3) /* XWDLEN1 */ |
| return; |
| if (s->tx_req > 3) { |
| s->tx_req -= 4; |
| if (s->codec && s->codec->cts) { |
| s->codec->out.fifo[s->codec->out.len ++] = |
| (value >> 24) & 0xff; |
| s->codec->out.fifo[s->codec->out.len ++] = |
| (value >> 16) & 0xff; |
| s->codec->out.fifo[s->codec->out.len ++] = |
| (value >> 8) & 0xff; |
| s->codec->out.fifo[s->codec->out.len ++] = |
| (value >> 0) & 0xff; |
| } |
| if (s->tx_req < 4) |
| omap_mcbsp_tx_done(s); |
| } else |
| printf("%s: Tx FIFO overrun\n", __func__); |
| return; |
| } |
| |
| omap_badwidth_write16(opaque, addr, value); |
| } |
| |
| static void omap_mcbsp_write(void *opaque, hwaddr addr, |
| uint64_t value, unsigned size) |
| { |
| switch (size) { |
| case 2: |
| omap_mcbsp_writeh(opaque, addr, value); |
| break; |
| case 4: |
| omap_mcbsp_writew(opaque, addr, value); |
| break; |
| default: |
| omap_badwidth_write16(opaque, addr, value); |
| } |
| } |
| |
| static const MemoryRegionOps omap_mcbsp_ops = { |
| .read = omap_mcbsp_read, |
| .write = omap_mcbsp_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static void omap_mcbsp_reset(struct omap_mcbsp_s *s) |
| { |
| memset(&s->spcr, 0, sizeof(s->spcr)); |
| memset(&s->rcr, 0, sizeof(s->rcr)); |
| memset(&s->xcr, 0, sizeof(s->xcr)); |
| s->srgr[0] = 0x0001; |
| s->srgr[1] = 0x2000; |
| memset(&s->mcr, 0, sizeof(s->mcr)); |
| memset(&s->pcr, 0, sizeof(s->pcr)); |
| memset(&s->rcer, 0, sizeof(s->rcer)); |
| memset(&s->xcer, 0, sizeof(s->xcer)); |
| s->tx_req = 0; |
| s->rx_req = 0; |
| s->tx_rate = 0; |
| s->rx_rate = 0; |
| timer_del(s->source_timer); |
| timer_del(s->sink_timer); |
| } |
| |
| static struct omap_mcbsp_s *omap_mcbsp_init(MemoryRegion *system_memory, |
| hwaddr base, |
| qemu_irq txirq, qemu_irq rxirq, |
| qemu_irq *dma, omap_clk clk) |
| { |
| struct omap_mcbsp_s *s = g_new0(struct omap_mcbsp_s, 1); |
| |
| s->txirq = txirq; |
| s->rxirq = rxirq; |
| s->txdrq = dma[0]; |
| s->rxdrq = dma[1]; |
| s->sink_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, omap_mcbsp_sink_tick, s); |
| s->source_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, omap_mcbsp_source_tick, s); |
| omap_mcbsp_reset(s); |
| |
| memory_region_init_io(&s->iomem, NULL, &omap_mcbsp_ops, s, "omap-mcbsp", 0x800); |
| memory_region_add_subregion(system_memory, base, &s->iomem); |
| |
| return s; |
| } |
| |
| static void omap_mcbsp_i2s_swallow(void *opaque, int line, int level) |
| { |
| struct omap_mcbsp_s *s = opaque; |
| |
| if (s->rx_rate) { |
| s->rx_req = s->codec->in.len; |
| omap_mcbsp_rx_newdata(s); |
| } |
| } |
| |
| static void omap_mcbsp_i2s_start(void *opaque, int line, int level) |
| { |
| struct omap_mcbsp_s *s = opaque; |
| |
| if (s->tx_rate) { |
| s->tx_req = s->codec->out.size; |
| omap_mcbsp_tx_newdata(s); |
| } |
| } |
| |
| void omap_mcbsp_i2s_attach(struct omap_mcbsp_s *s, I2SCodec *slave) |
| { |
| s->codec = slave; |
| slave->rx_swallow = qemu_allocate_irq(omap_mcbsp_i2s_swallow, s, 0); |
| slave->tx_start = qemu_allocate_irq(omap_mcbsp_i2s_start, s, 0); |
| } |
| |
| /* LED Pulse Generators */ |
| struct omap_lpg_s { |
| MemoryRegion iomem; |
| QEMUTimer *tm; |
| |
| uint8_t control; |
| uint8_t power; |
| int64_t on; |
| int64_t period; |
| int clk; |
| int cycle; |
| }; |
| |
| static void omap_lpg_tick(void *opaque) |
| { |
| struct omap_lpg_s *s = opaque; |
| |
| if (s->cycle) |
| timer_mod(s->tm, qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL) + s->period - s->on); |
| else |
| timer_mod(s->tm, qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL) + s->on); |
| |
| s->cycle = !s->cycle; |
| printf("%s: LED is %s\n", __func__, s->cycle ? "on" : "off"); |
| } |
| |
| static void omap_lpg_update(struct omap_lpg_s *s) |
| { |
| int64_t on, period = 1, ticks = 1000; |
| static const int per[8] = { 1, 2, 4, 8, 12, 16, 20, 24 }; |
| |
| if (~s->control & (1 << 6)) /* LPGRES */ |
| on = 0; |
| else if (s->control & (1 << 7)) /* PERM_ON */ |
| on = period; |
| else { |
| period = muldiv64(ticks, per[s->control & 7], /* PERCTRL */ |
| 256 / 32); |
| on = (s->clk && s->power) ? muldiv64(ticks, |
| per[(s->control >> 3) & 7], 256) : 0; /* ONCTRL */ |
| } |
| |
| timer_del(s->tm); |
| if (on == period && s->on < s->period) |
| printf("%s: LED is on\n", __func__); |
| else if (on == 0 && s->on) |
| printf("%s: LED is off\n", __func__); |
| else if (on && (on != s->on || period != s->period)) { |
| s->cycle = 0; |
| s->on = on; |
| s->period = period; |
| omap_lpg_tick(s); |
| return; |
| } |
| |
| s->on = on; |
| s->period = period; |
| } |
| |
| static void omap_lpg_reset(struct omap_lpg_s *s) |
| { |
| s->control = 0x00; |
| s->power = 0x00; |
| s->clk = 1; |
| omap_lpg_update(s); |
| } |
| |
| static uint64_t omap_lpg_read(void *opaque, hwaddr addr, unsigned size) |
| { |
| struct omap_lpg_s *s = opaque; |
| int offset = addr & OMAP_MPUI_REG_MASK; |
| |
| if (size != 1) { |
| return omap_badwidth_read8(opaque, addr); |
| } |
| |
| switch (offset) { |
| case 0x00: /* LCR */ |
| return s->control; |
| |
| case 0x04: /* PMR */ |
| return s->power; |
| } |
| |
| OMAP_BAD_REG(addr); |
| return 0; |
| } |
| |
| static void omap_lpg_write(void *opaque, hwaddr addr, |
| uint64_t value, unsigned size) |
| { |
| struct omap_lpg_s *s = opaque; |
| int offset = addr & OMAP_MPUI_REG_MASK; |
| |
| if (size != 1) { |
| omap_badwidth_write8(opaque, addr, value); |
| return; |
| } |
| |
| switch (offset) { |
| case 0x00: /* LCR */ |
| if (~value & (1 << 6)) /* LPGRES */ |
| omap_lpg_reset(s); |
| s->control = value & 0xff; |
| omap_lpg_update(s); |
| return; |
| |
| case 0x04: /* PMR */ |
| s->power = value & 0x01; |
| omap_lpg_update(s); |
| return; |
| |
| default: |
| OMAP_BAD_REG(addr); |
| return; |
| } |
| } |
| |
| static const MemoryRegionOps omap_lpg_ops = { |
| .read = omap_lpg_read, |
| .write = omap_lpg_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static void omap_lpg_clk_update(void *opaque, int line, int on) |
| { |
| struct omap_lpg_s *s = opaque; |
| |
| s->clk = on; |
| omap_lpg_update(s); |
| } |
| |
| static struct omap_lpg_s *omap_lpg_init(MemoryRegion *system_memory, |
| hwaddr base, omap_clk clk) |
| { |
| struct omap_lpg_s *s = g_new0(struct omap_lpg_s, 1); |
| |
| s->tm = timer_new_ms(QEMU_CLOCK_VIRTUAL, omap_lpg_tick, s); |
| |
| omap_lpg_reset(s); |
| |
| memory_region_init_io(&s->iomem, NULL, &omap_lpg_ops, s, "omap-lpg", 0x800); |
| memory_region_add_subregion(system_memory, base, &s->iomem); |
| |
| omap_clk_adduser(clk, qemu_allocate_irq(omap_lpg_clk_update, s, 0)); |
| |
| return s; |
| } |
| |
| /* MPUI Peripheral Bridge configuration */ |
| static uint64_t omap_mpui_io_read(void *opaque, hwaddr addr, |
| unsigned size) |
| { |
| if (size != 2) { |
| return omap_badwidth_read16(opaque, addr); |
| } |
| |
| if (addr == OMAP_MPUI_BASE) /* CMR */ |
| return 0xfe4d; |
| |
| OMAP_BAD_REG(addr); |
| return 0; |
| } |
| |
| static void omap_mpui_io_write(void *opaque, hwaddr addr, |
| uint64_t value, unsigned size) |
| { |
| /* FIXME: infinite loop */ |
| omap_badwidth_write16(opaque, addr, value); |
| } |
| |
| static const MemoryRegionOps omap_mpui_io_ops = { |
| .read = omap_mpui_io_read, |
| .write = omap_mpui_io_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static void omap_setup_mpui_io(MemoryRegion *system_memory, |
| struct omap_mpu_state_s *mpu) |
| { |
| memory_region_init_io(&mpu->mpui_io_iomem, NULL, &omap_mpui_io_ops, mpu, |
| "omap-mpui-io", 0x7fff); |
| memory_region_add_subregion(system_memory, OMAP_MPUI_BASE, |
| &mpu->mpui_io_iomem); |
| } |
| |
| /* General chip reset */ |
| static void omap1_mpu_reset(void *opaque) |
| { |
| struct omap_mpu_state_s *mpu = opaque; |
| |
| omap_dma_reset(mpu->dma); |
| omap_mpu_timer_reset(mpu->timer[0]); |
| omap_mpu_timer_reset(mpu->timer[1]); |
| omap_mpu_timer_reset(mpu->timer[2]); |
| omap_wd_timer_reset(mpu->wdt); |
| omap_os_timer_reset(mpu->os_timer); |
| omap_lcdc_reset(mpu->lcd); |
| omap_ulpd_pm_reset(mpu); |
| omap_pin_cfg_reset(mpu); |
| omap_mpui_reset(mpu); |
| omap_tipb_bridge_reset(mpu->private_tipb); |
| omap_tipb_bridge_reset(mpu->public_tipb); |
| omap_dpll_reset(mpu->dpll[0]); |
| omap_dpll_reset(mpu->dpll[1]); |
| omap_dpll_reset(mpu->dpll[2]); |
| omap_uart_reset(mpu->uart[0]); |
| omap_uart_reset(mpu->uart[1]); |
| omap_uart_reset(mpu->uart[2]); |
| omap_mmc_reset(mpu->mmc); |
| omap_mpuio_reset(mpu->mpuio); |
| omap_uwire_reset(mpu->microwire); |
| omap_pwl_reset(mpu->pwl); |
| omap_pwt_reset(mpu->pwt); |
| omap_rtc_reset(mpu->rtc); |
| omap_mcbsp_reset(mpu->mcbsp1); |
| omap_mcbsp_reset(mpu->mcbsp2); |
| omap_mcbsp_reset(mpu->mcbsp3); |
| omap_lpg_reset(mpu->led[0]); |
| omap_lpg_reset(mpu->led[1]); |
| omap_clkm_reset(mpu); |
| cpu_reset(CPU(mpu->cpu)); |
| } |
| |
| static const struct omap_map_s { |
| hwaddr phys_dsp; |
| hwaddr phys_mpu; |
| uint32_t size; |
| const char *name; |
| } omap15xx_dsp_mm[] = { |
| /* Strobe 0 */ |
| { 0xe1010000, 0xfffb0000, 0x800, "UART1 BT" }, /* CS0 */ |
| { 0xe1010800, 0xfffb0800, 0x800, "UART2 COM" }, /* CS1 */ |
| { 0xe1011800, 0xfffb1800, 0x800, "McBSP1 audio" }, /* CS3 */ |
| { 0xe1012000, 0xfffb2000, 0x800, "MCSI2 communication" }, /* CS4 */ |
| { 0xe1012800, 0xfffb2800, 0x800, "MCSI1 BT u-Law" }, /* CS5 */ |
| { 0xe1013000, 0xfffb3000, 0x800, "uWire" }, /* CS6 */ |
| { 0xe1013800, 0xfffb3800, 0x800, "I^2C" }, /* CS7 */ |
| { 0xe1014000, 0xfffb4000, 0x800, "USB W2FC" }, /* CS8 */ |
| { 0xe1014800, 0xfffb4800, 0x800, "RTC" }, /* CS9 */ |
| { 0xe1015000, 0xfffb5000, 0x800, "MPUIO" }, /* CS10 */ |
| { 0xe1015800, 0xfffb5800, 0x800, "PWL" }, /* CS11 */ |
| { 0xe1016000, 0xfffb6000, 0x800, "PWT" }, /* CS12 */ |
| { 0xe1017000, 0xfffb7000, 0x800, "McBSP3" }, /* CS14 */ |
| { 0xe1017800, 0xfffb7800, 0x800, "MMC" }, /* CS15 */ |
| { 0xe1019000, 0xfffb9000, 0x800, "32-kHz timer" }, /* CS18 */ |
| { 0xe1019800, 0xfffb9800, 0x800, "UART3" }, /* CS19 */ |
| { 0xe101c800, 0xfffbc800, 0x800, "TIPB switches" }, /* CS25 */ |
| /* Strobe 1 */ |
| { 0xe101e000, 0xfffce000, 0x800, "GPIOs" }, /* CS28 */ |
| |
| { 0 } |
| }; |
| |
| static void omap_setup_dsp_mapping(MemoryRegion *system_memory, |
| const struct omap_map_s *map) |
| { |
| MemoryRegion *io; |
| |
| for (; map->phys_dsp; map ++) { |
| io = g_new(MemoryRegion, 1); |
| memory_region_init_alias(io, NULL, map->name, |
| system_memory, map->phys_mpu, map->size); |
| memory_region_add_subregion(system_memory, map->phys_dsp, io); |
| } |
| } |
| |
| void omap_mpu_wakeup(void *opaque, int irq, int req) |
| { |
| struct omap_mpu_state_s *mpu = opaque; |
| CPUState *cpu = CPU(mpu->cpu); |
| |
| if (cpu->halted) { |
| cpu_interrupt(cpu, CPU_INTERRUPT_EXITTB); |
| } |
| } |
| |
| static const struct dma_irq_map omap1_dma_irq_map[] = { |
| { 0, OMAP_INT_DMA_CH0_6 }, |
| { 0, OMAP_INT_DMA_CH1_7 }, |
| { 0, OMAP_INT_DMA_CH2_8 }, |
| { 0, OMAP_INT_DMA_CH3 }, |
| { 0, OMAP_INT_DMA_CH4 }, |
| { 0, OMAP_INT_DMA_CH5 }, |
| { 1, OMAP_INT_1610_DMA_CH6 }, |
| { 1, OMAP_INT_1610_DMA_CH7 }, |
| { 1, OMAP_INT_1610_DMA_CH8 }, |
| { 1, OMAP_INT_1610_DMA_CH9 }, |
| { 1, OMAP_INT_1610_DMA_CH10 }, |
| { 1, OMAP_INT_1610_DMA_CH11 }, |
| { 1, OMAP_INT_1610_DMA_CH12 }, |
| { 1, OMAP_INT_1610_DMA_CH13 }, |
| { 1, OMAP_INT_1610_DMA_CH14 }, |
| { 1, OMAP_INT_1610_DMA_CH15 } |
| }; |
| |
| /* DMA ports for OMAP1 */ |
| static int omap_validate_emiff_addr(struct omap_mpu_state_s *s, |
| hwaddr addr) |
| { |
| return range_covers_byte(OMAP_EMIFF_BASE, s->sdram_size, addr); |
| } |
| |
| static int omap_validate_emifs_addr(struct omap_mpu_state_s *s, |
| hwaddr addr) |
| { |
| return range_covers_byte(OMAP_EMIFS_BASE, OMAP_EMIFF_BASE - OMAP_EMIFS_BASE, |
| addr); |
| } |
| |
| static int omap_validate_imif_addr(struct omap_mpu_state_s *s, |
| hwaddr addr) |
| { |
| return range_covers_byte(OMAP_IMIF_BASE, s->sram_size, addr); |
| } |
| |
| static int omap_validate_tipb_addr(struct omap_mpu_state_s *s, |
| hwaddr addr) |
| { |
| return range_covers_byte(0xfffb0000, 0xffff0000 - 0xfffb0000, addr); |
| } |
| |
| static int omap_validate_local_addr(struct omap_mpu_state_s *s, |
| hwaddr addr) |
| { |
| return range_covers_byte(OMAP_LOCALBUS_BASE, 0x1000000, addr); |
| } |
| |
| static int omap_validate_tipb_mpui_addr(struct omap_mpu_state_s *s, |
| hwaddr addr) |
| { |
| return range_covers_byte(0xe1010000, 0xe1020004 - 0xe1010000, addr); |
| } |
| |
| struct omap_mpu_state_s *omap310_mpu_init(MemoryRegion *dram, |
| const char *cpu_type) |
| { |
| int i; |
| struct omap_mpu_state_s *s = g_new0(struct omap_mpu_state_s, 1); |
| qemu_irq dma_irqs[6]; |
| DriveInfo *dinfo; |
| SysBusDevice *busdev; |
| MemoryRegion *system_memory = get_system_memory(); |
| |
| /* Core */ |
| s->mpu_model = omap310; |
| s->cpu = ARM_CPU(cpu_create(cpu_type)); |
| s->sdram_size = memory_region_size(dram); |
| s->sram_size = OMAP15XX_SRAM_SIZE; |
| |
| s->wakeup = qemu_allocate_irq(omap_mpu_wakeup, s, 0); |
| |
| /* Clocks */ |
| omap_clk_init(s); |
| |
| /* Memory-mapped stuff */ |
| memory_region_init_ram(&s->imif_ram, NULL, "omap1.sram", s->sram_size, |
| &error_fatal); |
| memory_region_add_subregion(system_memory, OMAP_IMIF_BASE, &s->imif_ram); |
| |
| omap_clkm_init(system_memory, 0xfffece00, 0xe1008000, s); |
| |
| s->ih[0] = qdev_new("omap-intc"); |
| qdev_prop_set_uint32(s->ih[0], "size", 0x100); |
| omap_intc_set_iclk(OMAP_INTC(s->ih[0]), omap_findclk(s, "arminth_ck")); |
| busdev = SYS_BUS_DEVICE(s->ih[0]); |
| sysbus_realize_and_unref(busdev, &error_fatal); |
| sysbus_connect_irq(busdev, 0, |
| qdev_get_gpio_in(DEVICE(s->cpu), ARM_CPU_IRQ)); |
| sysbus_connect_irq(busdev, 1, |
| qdev_get_gpio_in(DEVICE(s->cpu), ARM_CPU_FIQ)); |
| sysbus_mmio_map(busdev, 0, 0xfffecb00); |
| s->ih[1] = qdev_new("omap-intc"); |
| qdev_prop_set_uint32(s->ih[1], "size", 0x800); |
| omap_intc_set_iclk(OMAP_INTC(s->ih[1]), omap_findclk(s, "arminth_ck")); |
| busdev = SYS_BUS_DEVICE(s->ih[1]); |
| sysbus_realize_and_unref(busdev, &error_fatal); |
| sysbus_connect_irq(busdev, 0, |
| qdev_get_gpio_in(s->ih[0], OMAP_INT_15XX_IH2_IRQ)); |
| /* The second interrupt controller's FIQ output is not wired up */ |
| sysbus_mmio_map(busdev, 0, 0xfffe0000); |
| |
| for (i = 0; i < 6; i++) { |
| dma_irqs[i] = qdev_get_gpio_in(s->ih[omap1_dma_irq_map[i].ih], |
| omap1_dma_irq_map[i].intr); |
| } |
| s->dma = omap_dma_init(0xfffed800, dma_irqs, system_memory, |
| qdev_get_gpio_in(s->ih[0], OMAP_INT_DMA_LCD), |
| s, omap_findclk(s, "dma_ck"), omap_dma_3_1); |
| |
| s->port[emiff ].addr_valid = omap_validate_emiff_addr; |
| s->port[emifs ].addr_valid = omap_validate_emifs_addr; |
| s->port[imif ].addr_valid = omap_validate_imif_addr; |
| s->port[tipb ].addr_valid = omap_validate_tipb_addr; |
| s->port[local ].addr_valid = omap_validate_local_addr; |
| s->port[tipb_mpui].addr_valid = omap_validate_tipb_mpui_addr; |
| |
| /* Register SDRAM and SRAM DMA ports for fast transfers. */ |
| soc_dma_port_add_mem(s->dma, memory_region_get_ram_ptr(dram), |
| OMAP_EMIFF_BASE, s->sdram_size); |
| soc_dma_port_add_mem(s->dma, memory_region_get_ram_ptr(&s->imif_ram), |
| OMAP_IMIF_BASE, s->sram_size); |
| |
| s->timer[0] = omap_mpu_timer_init(system_memory, 0xfffec500, |
| qdev_get_gpio_in(s->ih[0], OMAP_INT_TIMER1), |
| omap_findclk(s, "mputim_ck")); |
| s->timer[1] = omap_mpu_timer_init(system_memory, 0xfffec600, |
| qdev_get_gpio_in(s->ih[0], OMAP_INT_TIMER2), |
| omap_findclk(s, "mputim_ck")); |
| s->timer[2] = omap_mpu_timer_init(system_memory, 0xfffec700, |
| qdev_get_gpio_in(s->ih[0], OMAP_INT_TIMER3), |
| omap_findclk(s, "mputim_ck")); |
| |
| s->wdt = omap_wd_timer_init(system_memory, 0xfffec800, |
| qdev_get_gpio_in(s->ih[0], OMAP_INT_WD_TIMER), |
| omap_findclk(s, "armwdt_ck")); |
| |
| s->os_timer = omap_os_timer_init(system_memory, 0xfffb9000, |
| qdev_get_gpio_in(s->ih[1], OMAP_INT_OS_TIMER), |
| omap_findclk(s, "clk32-kHz")); |
| |
| s->lcd = omap_lcdc_init(system_memory, 0xfffec000, |
| qdev_get_gpio_in(s->ih[0], OMAP_INT_LCD_CTRL), |
| omap_dma_get_lcdch(s->dma), |
| omap_findclk(s, "lcd_ck")); |
| |
| omap_ulpd_pm_init(system_memory, 0xfffe0800, s); |
| omap_pin_cfg_init(system_memory, 0xfffe1000, s); |
| omap_id_init(system_memory, s); |
| |
| omap_mpui_init(system_memory, 0xfffec900, s); |
| |
| s->private_tipb = omap_tipb_bridge_init(system_memory, 0xfffeca00, |
| qdev_get_gpio_in(s->ih[0], OMAP_INT_BRIDGE_PRIV), |
| omap_findclk(s, "tipb_ck")); |
| s->public_tipb = omap_tipb_bridge_init(system_memory, 0xfffed300, |
| qdev_get_gpio_in(s->ih[0], OMAP_INT_BRIDGE_PUB), |
| omap_findclk(s, "tipb_ck")); |
| |
| omap_tcmi_init(system_memory, 0xfffecc00, s); |
| |
| s->uart[0] = omap_uart_init(0xfffb0000, |
| qdev_get_gpio_in(s->ih[1], OMAP_INT_UART1), |
| omap_findclk(s, "uart1_ck"), |
| omap_findclk(s, "uart1_ck"), |
| s->drq[OMAP_DMA_UART1_TX], s->drq[OMAP_DMA_UART1_RX], |
| "uart1", |
| serial_hd(0)); |
| s->uart[1] = omap_uart_init(0xfffb0800, |
| qdev_get_gpio_in(s->ih[1], OMAP_INT_UART2), |
| omap_findclk(s, "uart2_ck"), |
| omap_findclk(s, "uart2_ck"), |
| s->drq[OMAP_DMA_UART2_TX], s->drq[OMAP_DMA_UART2_RX], |
| "uart2", |
| serial_hd(0) ? serial_hd(1) : NULL); |
| s->uart[2] = omap_uart_init(0xfffb9800, |
| qdev_get_gpio_in(s->ih[0], OMAP_INT_UART3), |
| omap_findclk(s, "uart3_ck"), |
| omap_findclk(s, "uart3_ck"), |
| s->drq[OMAP_DMA_UART3_TX], s->drq[OMAP_DMA_UART3_RX], |
| "uart3", |
| serial_hd(0) && serial_hd(1) ? serial_hd(2) : NULL); |
| |
| s->dpll[0] = omap_dpll_init(system_memory, 0xfffecf00, |
| omap_findclk(s, "dpll1")); |
| s->dpll[1] = omap_dpll_init(system_memory, 0xfffed000, |
| omap_findclk(s, "dpll2")); |
| s->dpll[2] = omap_dpll_init(system_memory, 0xfffed100, |
| omap_findclk(s, "dpll3")); |
| |
| dinfo = drive_get(IF_SD, 0, 0); |
| if (!dinfo && !qtest_enabled()) { |
| warn_report("missing SecureDigital device"); |
| } |
| s->mmc = omap_mmc_init(0xfffb7800, system_memory, |
| dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, |
| qdev_get_gpio_in(s->ih[1], OMAP_INT_OQN), |
| &s->drq[OMAP_DMA_MMC_TX], |
| omap_findclk(s, "mmc_ck")); |
| |
| s->mpuio = omap_mpuio_init(system_memory, 0xfffb5000, |
| qdev_get_gpio_in(s->ih[1], OMAP_INT_KEYBOARD), |
| qdev_get_gpio_in(s->ih[1], OMAP_INT_MPUIO), |
| s->wakeup, omap_findclk(s, "clk32-kHz")); |
| |
| s->gpio = qdev_new("omap-gpio"); |
| qdev_prop_set_int32(s->gpio, "mpu_model", s->mpu_model); |
| omap_gpio_set_clk(OMAP1_GPIO(s->gpio), omap_findclk(s, "arm_gpio_ck")); |
| sysbus_realize_and_unref(SYS_BUS_DEVICE(s->gpio), &error_fatal); |
| sysbus_connect_irq(SYS_BUS_DEVICE(s->gpio), 0, |
| qdev_get_gpio_in(s->ih[0], OMAP_INT_GPIO_BANK1)); |
| sysbus_mmio_map(SYS_BUS_DEVICE(s->gpio), 0, 0xfffce000); |
| |
| s->microwire = omap_uwire_init(system_memory, 0xfffb3000, |
| qdev_get_gpio_in(s->ih[1], OMAP_INT_uWireTX), |
| qdev_get_gpio_in(s->ih[1], OMAP_INT_uWireRX), |
| s->drq[OMAP_DMA_UWIRE_TX], omap_findclk(s, "mpuper_ck")); |
| |
| s->pwl = omap_pwl_init(system_memory, 0xfffb5800, |
| omap_findclk(s, "armxor_ck")); |
| s->pwt = omap_pwt_init(system_memory, 0xfffb6000, |
| omap_findclk(s, "armxor_ck")); |
| |
| s->i2c[0] = qdev_new("omap_i2c"); |
| qdev_prop_set_uint8(s->i2c[0], "revision", 0x11); |
| omap_i2c_set_fclk(OMAP_I2C(s->i2c[0]), omap_findclk(s, "mpuper_ck")); |
| busdev = SYS_BUS_DEVICE(s->i2c[0]); |
| sysbus_realize_and_unref(busdev, &error_fatal); |
| sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(s->ih[1], OMAP_INT_I2C)); |
| sysbus_connect_irq(busdev, 1, s->drq[OMAP_DMA_I2C_TX]); |
| sysbus_connect_irq(busdev, 2, s->drq[OMAP_DMA_I2C_RX]); |
| sysbus_mmio_map(busdev, 0, 0xfffb3800); |
| |
| s->rtc = omap_rtc_init(system_memory, 0xfffb4800, |
| qdev_get_gpio_in(s->ih[1], OMAP_INT_RTC_TIMER), |
| qdev_get_gpio_in(s->ih[1], OMAP_INT_RTC_ALARM), |
| omap_findclk(s, "clk32-kHz")); |
| |
| s->mcbsp1 = omap_mcbsp_init(system_memory, 0xfffb1800, |
| qdev_get_gpio_in(s->ih[1], OMAP_INT_McBSP1TX), |
| qdev_get_gpio_in(s->ih[1], OMAP_INT_McBSP1RX), |
| &s->drq[OMAP_DMA_MCBSP1_TX], omap_findclk(s, "dspxor_ck")); |
| s->mcbsp2 = omap_mcbsp_init(system_memory, 0xfffb1000, |
| qdev_get_gpio_in(s->ih[0], |
| OMAP_INT_310_McBSP2_TX), |
| qdev_get_gpio_in(s->ih[0], |
| OMAP_INT_310_McBSP2_RX), |
| &s->drq[OMAP_DMA_MCBSP2_TX], omap_findclk(s, "mpuper_ck")); |
| s->mcbsp3 = omap_mcbsp_init(system_memory, 0xfffb7000, |
| qdev_get_gpio_in(s->ih[1], OMAP_INT_McBSP3TX), |
| qdev_get_gpio_in(s->ih[1], OMAP_INT_McBSP3RX), |
| &s->drq[OMAP_DMA_MCBSP3_TX], omap_findclk(s, "dspxor_ck")); |
| |
| s->led[0] = omap_lpg_init(system_memory, |
| 0xfffbd000, omap_findclk(s, "clk32-kHz")); |
| s->led[1] = omap_lpg_init(system_memory, |
| 0xfffbd800, omap_findclk(s, "clk32-kHz")); |
| |
| /* Register mappings not currenlty implemented: |
| * MCSI2 Comm fffb2000 - fffb27ff (not mapped on OMAP310) |
| * MCSI1 Bluetooth fffb2800 - fffb2fff (not mapped on OMAP310) |
| * USB W2FC fffb4000 - fffb47ff |
| * Camera Interface fffb6800 - fffb6fff |
| * USB Host fffba000 - fffba7ff |
| * FAC fffba800 - fffbafff |
| * HDQ/1-Wire fffbc000 - fffbc7ff |
| * TIPB switches fffbc800 - fffbcfff |
| * Mailbox fffcf000 - fffcf7ff |
| * Local bus IF fffec100 - fffec1ff |
| * Local bus MMU fffec200 - fffec2ff |
| * DSP MMU fffed200 - fffed2ff |
| */ |
| |
| omap_setup_dsp_mapping(system_memory, omap15xx_dsp_mm); |
| omap_setup_mpui_io(system_memory, s); |
| |
| qemu_register_reset(omap1_mpu_reset, s); |
| |
| return s; |
| } |