scripts/coverity-scan/run-coverity-scan - qemu - Git at Google

 #!/bin/sh -e

 # Upload a created tarball to Coverity Scan, as per
 # https://scan.coverity.com/projects/qemu/builds/new

 # This work is licensed under the terms of the GNU GPL version 2,
 # or (at your option) any later version.
 # See the COPYING file in the top-level directory.
 #
 # Copyright (c) 2017-2020 Linaro Limited
 # Written by Peter Maydell

 # Note that this script will automatically download and
 # run the (closed-source) coverity build tools, so don't
 # use it if you don't trust them!

 # This script assumes that you're running it from a QEMU source
 # tree, and that tree is a fresh clean one, because we do an in-tree
 # build. (This is necessary so that the filenames that the Coverity
 # Scan server sees are relative paths that match up with the component
 # regular expressions it uses; an out-of-tree build won't work for this.)
 # The host machine should have as many of QEMU's dependencies
 # installed as possible, for maximum coverity coverage.

 # To do an upload you need to be a maintainer in the Coverity online
 # service, and you will need to know the "Coverity token", which is a
 # secret 8 digit hex string. You can find that from the web UI in the
 # project settings, if you have maintainer access there.

 # Command line options:
 #   --dry-run : run the tools, but don't actually do the upload
 #   --docker : create and work inside a container
 #   --docker-engine : specify the container engine to use (docker/podman/auto);
 #                     implies --docker
 #   --update-tools-only : update the cached copy of the tools, but don't run them
 #   --no-update-tools : do not update the cached copy of the tools
 #   --tokenfile : file to read Coverity token from
 #   --version ver : specify version being analyzed (default: ask git)
 #   --description desc : specify description of this version (default: ask git)
 #   --srcdir : QEMU source tree to analyze (default: current working dir)
 #   --results-tarball : path to copy the results tarball to (default: don't
 #                       copy it anywhere, just upload it)
 #   --src-tarball : tarball to untar into src dir (default: none); this
 #                   is intended mainly for internal use by the Docker support
 #
 # User-specifiable environment variables:
 #  COVERITY_TOKEN -- Coverity token (default: looks at your
 #                    coverity.token config)
 #  COVERITY_EMAIL -- the email address to use for uploads (default:
 #                    looks at your git coverity.email or user.email config)
 #  COVERITY_BUILD_CMD -- make command (default: 'make -jN' where N is
 #                    number of CPUs as determined by 'nproc')
 #  COVERITY_TOOL_BASE -- set to directory to put coverity tools
 #                        (default: /tmp/coverity-tools)
 #
 # You must specify the token, either by environment variable or by
 # putting it in a file and using --tokenfile. Everything else has
 # a reasonable default if this is run from a git tree.

 check_upload_permissions() {
     # Check whether we can do an upload to the server; will exit the script
     # with status 1 if the check failed (usually a bad token);
     # will exit the script with status 0 if the check indicated that we
     # can't upload yet (ie we are at quota)
     # Assumes that COVERITY_TOKEN, PROJNAME and DRYRUN have been initialized.

     echo "Checking upload permissions..."

     if ! up_perm="$(wget https://scan.coverity.com/api/upload_permitted --post-data "token=$COVERITY_TOKEN&project=$PROJNAME" -q -O -)"; then
         echo "Coverity Scan API access denied: bad token?"
         exit 1
     fi

     # Really up_perm is a JSON response with either
     # {upload_permitted:true} or {next_upload_permitted_at:<date>}
     # We do some hacky string parsing instead of properly parsing it.
     case "$up_perm" in
         *upload_permitted*true*)
             echo "Coverity Scan: upload permitted"
             ;;
         *next_upload_permitted_at*)
             if [ "$DRYRUN" = yes ]; then
                 echo "Coverity Scan: upload quota reached, continuing dry run"
             else
                 echo "Coverity Scan: upload quota reached; stopping here"
                 # Exit success as this isn't a build error.
                 exit 0
             fi
             ;;
         *)
             echo "Coverity Scan upload check: unexpected result $up_perm"
             exit 1
             ;;
     esac
 }


 build_docker_image() {
     # build docker container including the coverity-scan tools
     echo "Building docker container..."
     # TODO: This re-unpacks the tools every time, rather than caching
     # and reusing the image produced by the COPY of the .tgz file.
     # Not sure why.
     tests/docker/docker.py --engine ${DOCKER_ENGINE} build \
                    -t coverity-scanner -f scripts/coverity-scan/coverity-scan.docker \
                    --extra-files scripts/coverity-scan/run-coverity-scan \
                                  "$COVERITY_TOOL_BASE"/coverity_tool.tgz
 }

 update_coverity_tools () {
     # Check for whether we need to download the Coverity tools
     # (either because we don't have a copy, or because it's out of date)
     # Assumes that COVERITY_TOOL_BASE, COVERITY_TOKEN and PROJNAME are set.

     mkdir -p "$COVERITY_TOOL_BASE"
     cd "$COVERITY_TOOL_BASE"

     echo "Checking for new version of coverity build tools..."
     wget https://scan.coverity.com/download/linux64 --post-data "token=$COVERITY_TOKEN&project=$PROJNAME&md5=1" -O coverity_tool.md5.new

     if ! cmp -s coverity_tool.md5 coverity_tool.md5.new; then
         # out of date md5 or no md5: download new build tool
         # blow away the old build tool
         echo "Downloading coverity build tools..."
         rm -rf coverity_tool coverity_tool.tgz
         wget https://scan.coverity.com/download/linux64 --post-data "token=$COVERITY_TOKEN&project=$PROJNAME" -O coverity_tool.tgz
         if ! (cat coverity_tool.md5.new; echo "  coverity_tool.tgz") | md5sum -c --status; then
             echo "Downloaded tarball didn't match md5sum!"
             exit 1
         fi

         if [ "$DOCKER" != yes ]; then
             # extract the new one, keeping it corralled in a 'coverity_tool' directory
             echo "Unpacking coverity build tools..."
             mkdir -p coverity_tool
             cd coverity_tool
             tar xf ../coverity_tool.tgz
             cd ..
             mv coverity_tool.md5.new coverity_tool.md5
         fi
     fi
     rm -f coverity_tool.md5.new
     cd "$SRCDIR"

     if [ "$DOCKER" = yes ]; then
         build_docker_image
     fi
 }


 # Check user-provided environment variables and arguments
 DRYRUN=no
 UPDATE=yes
 DOCKER=no

 while [ "$#" -ge 1 ]; do
     case "$1" in
         --dry-run)
             shift
             DRYRUN=yes
             ;;
         --no-update-tools)
             shift
             UPDATE=no
             ;;
         --update-tools-only)
             shift
             UPDATE=only
             ;;
         --version)
             shift
             if [ $# -eq 0 ]; then
                 echo "--version needs an argument"
                 exit 1
             fi
             VERSION="$1"
             shift
             ;;
         --description)
             shift
             if [ $# -eq 0 ]; then
                 echo "--description needs an argument"
                 exit 1
             fi
             DESCRIPTION="$1"
             shift
             ;;
         --tokenfile)
             shift
             if [ $# -eq 0 ]; then
                 echo "--tokenfile needs an argument"
                 exit 1
             fi
             COVERITY_TOKEN="$(cat "$1")"
             shift
             ;;
         --srcdir)
             shift
             if [ $# -eq 0 ]; then
                 echo "--srcdir needs an argument"
                 exit 1
             fi
             SRCDIR="$1"
             shift
             ;;
         --results-tarball)
             shift
             if [ $# -eq 0 ]; then
                 echo "--results-tarball needs an argument"
                 exit 1
             fi
             RESULTSTARBALL="$1"
             shift
             ;;
         --src-tarball)
             shift
             if [ $# -eq 0 ]; then
                 echo "--src-tarball needs an argument"
                 exit 1
             fi
             SRCTARBALL="$1"
             shift
             ;;
         --docker)
             DOCKER=yes
             DOCKER_ENGINE=auto
             shift
             ;;
         --docker-engine)
             shift
             if [ $# -eq 0 ]; then
                 echo "--docker-engine needs an argument"
                 exit 1
             fi
             DOCKER=yes
             DOCKER_ENGINE="$1"
             shift
             ;;
         *)
             echo "Unexpected argument '$1'"
             exit 1
             ;;
     esac
 done

 if [ -z "$COVERITY_TOKEN" ]; then
     COVERITY_TOKEN="$(git config coverity.token)"
 fi
 if [ -z "$COVERITY_TOKEN" ]; then
     echo "COVERITY_TOKEN environment variable not set"
     exit 1
 fi

 if [ -z "$COVERITY_BUILD_CMD" ]; then
     NPROC=$(nproc)
     COVERITY_BUILD_CMD="make -j$NPROC"
     echo "COVERITY_BUILD_CMD: using default '$COVERITY_BUILD_CMD'"
 fi

 if [ -z "$COVERITY_TOOL_BASE" ]; then
     echo "COVERITY_TOOL_BASE: using default /tmp/coverity-tools"
     COVERITY_TOOL_BASE=/tmp/coverity-tools
 fi

 if [ -z "$SRCDIR" ]; then
     SRCDIR="$PWD"
 fi

 PROJNAME=QEMU
 TARBALL=cov-int.tar.xz

 if [ "$UPDATE" = only ]; then
     # Just do the tools update; we don't need to check whether
     # we are in a source tree or have upload rights for this,
     # so do it before some of the command line and source tree checks.

     if [ "$DOCKER" = yes ] && [ ! -z "$SRCTARBALL" ]; then
         echo --update-tools-only --docker is incompatible with --src-tarball.
         exit 1
     fi

     update_coverity_tools
     exit 0
 fi

 if [ ! -e "$SRCDIR" ]; then
     mkdir "$SRCDIR"
 fi

 cd "$SRCDIR"

 if [ ! -z "$SRCTARBALL" ]; then
     echo "Untarring source tarball into $SRCDIR..."
     tar xvf "$SRCTARBALL"
 fi

 echo "Checking this is a QEMU source tree..."
 if ! [ -e "$SRCDIR/VERSION" ]; then
     echo "Not in a QEMU source tree?"
     exit 1
 fi

 # Fill in defaults used by the non-update-only process
 if [ -z "$VERSION" ]; then
     VERSION="$(git describe --always HEAD)"
 fi

 if [ -z "$DESCRIPTION" ]; then
     DESCRIPTION="$(git rev-parse HEAD)"
 fi

 if [ -z "$COVERITY_EMAIL" ]; then
     COVERITY_EMAIL="$(git config coverity.email)"
 fi
 if [ -z "$COVERITY_EMAIL" ]; then
     COVERITY_EMAIL="$(git config user.email)"
 fi

 # Otherwise, continue with the full build and upload process.

 check_upload_permissions

 if [ "$UPDATE" != no ]; then
     update_coverity_tools
 fi

 # Run ourselves inside docker if that's what the user wants
 if [ "$DOCKER" = yes ]; then
     # Put the Coverity token into a temporary file that only
     # we have read access to, and then pass it to docker build
     # using a volume.  A volume is enough for the token not to
     # leak into the Docker image.
     umask 077
     SECRETDIR=$(mktemp -d)
     if [ -z "$SECRETDIR" ]; then
         echo "Failed to create temporary directory"
         exit 1
     fi
     trap 'rm -rf "$SECRETDIR"' INT TERM EXIT
     echo "Created temporary directory $SECRETDIR"
     SECRET="$SECRETDIR/token"
     echo "$COVERITY_TOKEN" > "$SECRET"
     echo "Archiving sources to be analyzed..."
     ./scripts/archive-source.sh "$SECRETDIR/qemu-sources.tgz"
     ARGS="--no-update-tools"
     if [ "$DRYRUN" = yes ]; then
         ARGS="$ARGS --dry-run"
     fi
     echo "Running scanner..."
     # If we need to capture the output tarball, get the inner run to
     # save it to the secrets directory so we can copy it out before the
     # directory is cleaned up.
     if [ ! -z "$RESULTSTARBALL" ]; then
         ARGS="$ARGS --results-tarball /work/cov-int.tar.xz"
     fi
     # Arrange for this docker run to get access to the sources with -v.
     # We pass through all the configuration from the outer script to the inner.
     export COVERITY_EMAIL COVERITY_BUILD_CMD
     tests/docker/docker.py run -it --env COVERITY_EMAIL --env COVERITY_BUILD_CMD \
            -v "$SECRETDIR:/work" coverity-scanner \
            ./run-coverity-scan --version "$VERSION" \
            --description "$DESCRIPTION" $ARGS --tokenfile /work/token \
            --srcdir /qemu --src-tarball /work/qemu-sources.tgz
     if [ ! -z "$RESULTSTARBALL" ]; then
         echo "Copying results tarball to $RESULTSTARBALL..."
         cp "$SECRETDIR/cov-int.tar.xz" "$RESULTSTARBALL"
     fi
     echo "Docker work complete."
     exit 0
 fi

 TOOLBIN="$(cd "$COVERITY_TOOL_BASE" && echo $PWD/coverity_tool/cov-analysis-*/bin)"

 if ! test -x "$TOOLBIN/cov-build"; then
     echo "Couldn't find cov-build in the coverity build-tool directory??"
     exit 1
 fi

 export PATH="$TOOLBIN:$PATH"

 cd "$SRCDIR"

 echo "Nuking build directory..."
 rm -rf +build
 mkdir +build
 cd +build

 echo "Configuring..."
 # We configure with a fixed set of enables here to ensure that we don't
 # accidentally reduce the scope of the analysis by doing the build on
 # the system that's missing a dependency that we need to build part of
 # the codebase.
 ../configure --disable-modules --enable-sdl --enable-gtk \
     --enable-opengl --enable-vte --enable-gnutls \
     --enable-nettle --enable-curses --enable-curl \
     --audio-drv-list=oss,alsa,sdl,pa --enable-virtfs \
     --enable-vnc --enable-vnc-sasl --enable-vnc-jpeg --enable-png \
     --enable-xen --enable-brlapi \
     --enable-linux-aio --enable-attr \
     --enable-cap-ng --enable-trace-backends=log --enable-spice --enable-rbd \
     --enable-libusb --enable-usb-redir \
     --enable-libiscsi --enable-libnfs --enable-seccomp \
     --enable-tpm --enable-libssh --enable-lzo --enable-snappy --enable-bzip2 \
     --enable-numa --enable-rdma --enable-smartcard --enable-virglrenderer \
     --enable-mpath --enable-glusterfs \
     --enable-virtfs --enable-zstd

 echo "Running cov-build..."
 rm -rf cov-int
 mkdir cov-int
 cov-build --dir cov-int $COVERITY_BUILD_CMD

 echo "Creating results tarball..."
 tar cvf - cov-int | xz > "$TARBALL"

 if [ ! -z "$RESULTSTARBALL" ]; then
     echo "Copying results tarball to $RESULTSTARBALL..."
     cp "$TARBALL" "$RESULTSTARBALL"
 fi

 echo "Uploading results tarball..."

 if [ "$DRYRUN" = yes ]; then
     echo "Dry run only, not uploading $TARBALL"
     exit 0
 fi

 curl --form token="$COVERITY_TOKEN" --form email="$COVERITY_EMAIL" \
      --form file=@"$TARBALL" --form version="$VERSION" \
      --form description="$DESCRIPTION" \
      https://scan.coverity.com/builds?project="$PROJNAME"

 echo "Done."
	#!/bin/sh -e

	# Upload a created tarball to Coverity Scan, as per
	# https://scan.coverity.com/projects/qemu/builds/new

	# This work is licensed under the terms of the GNU GPL version 2,
	# or (at your option) any later version.
	# See the COPYING file in the top-level directory.
	#
	# Copyright (c) 2017-2020 Linaro Limited
	# Written by Peter Maydell

	# Note that this script will automatically download and
	# run the (closed-source) coverity build tools, so don't
	# use it if you don't trust them!

	# This script assumes that you're running it from a QEMU source
	# tree, and that tree is a fresh clean one, because we do an in-tree
	# build. (This is necessary so that the filenames that the Coverity
	# Scan server sees are relative paths that match up with the component
	# regular expressions it uses; an out-of-tree build won't work for this.)
	# The host machine should have as many of QEMU's dependencies
	# installed as possible, for maximum coverity coverage.

	# To do an upload you need to be a maintainer in the Coverity online
	# service, and you will need to know the "Coverity token", which is a
	# secret 8 digit hex string. You can find that from the web UI in the
	# project settings, if you have maintainer access there.

	# Command line options:
	# --dry-run : run the tools, but don't actually do the upload
	# --docker : create and work inside a container
	# --docker-engine : specify the container engine to use (docker/podman/auto);
	# implies --docker
	# --update-tools-only : update the cached copy of the tools, but don't run them
	# --no-update-tools : do not update the cached copy of the tools
	# --tokenfile : file to read Coverity token from
	# --version ver : specify version being analyzed (default: ask git)
	# --description desc : specify description of this version (default: ask git)
	# --srcdir : QEMU source tree to analyze (default: current working dir)
	# --results-tarball : path to copy the results tarball to (default: don't
	# copy it anywhere, just upload it)
	# --src-tarball : tarball to untar into src dir (default: none); this
	# is intended mainly for internal use by the Docker support
	#
	# User-specifiable environment variables:
	# COVERITY_TOKEN -- Coverity token (default: looks at your
	# coverity.token config)
	# COVERITY_EMAIL -- the email address to use for uploads (default:
	# looks at your git coverity.email or user.email config)
	# COVERITY_BUILD_CMD -- make command (default: 'make -jN' where N is
	# number of CPUs as determined by 'nproc')
	# COVERITY_TOOL_BASE -- set to directory to put coverity tools
	# (default: /tmp/coverity-tools)
	#
	# You must specify the token, either by environment variable or by
	# putting it in a file and using --tokenfile. Everything else has
	# a reasonable default if this is run from a git tree.

	check_upload_permissions() {
	# Check whether we can do an upload to the server; will exit the script
	# with status 1 if the check failed (usually a bad token);
	# will exit the script with status 0 if the check indicated that we
	# can't upload yet (ie we are at quota)
	# Assumes that COVERITY_TOKEN, PROJNAME and DRYRUN have been initialized.

	echo "Checking upload permissions..."

	if ! up_perm="$(wget https://scan.coverity.com/api/upload_permitted --post-data "token=$COVERITY_TOKEN&project=$PROJNAME" -q -O -)"; then
	echo "Coverity Scan API access denied: bad token?"
	exit 1
	fi

	# Really up_perm is a JSON response with either
	# {upload_permitted:true} or {next_upload_permitted_at:<date>}
	# We do some hacky string parsing instead of properly parsing it.
	case "$up_perm" in
	upload_permittedtrue*)
	echo "Coverity Scan: upload permitted"
	;;
	next_upload_permitted_at)
	if [ "$DRYRUN" = yes ]; then
	echo "Coverity Scan: upload quota reached, continuing dry run"
	else
	echo "Coverity Scan: upload quota reached; stopping here"
	# Exit success as this isn't a build error.
	exit 0
	fi
	;;
	*)
	echo "Coverity Scan upload check: unexpected result $up_perm"
	exit 1
	;;
	esac
	}


	build_docker_image() {
	# build docker container including the coverity-scan tools
	echo "Building docker container..."
	# TODO: This re-unpacks the tools every time, rather than caching
	# and reusing the image produced by the COPY of the .tgz file.
	# Not sure why.
	tests/docker/docker.py --engine ${DOCKER_ENGINE} build \
	-t coverity-scanner -f scripts/coverity-scan/coverity-scan.docker \
	--extra-files scripts/coverity-scan/run-coverity-scan \
	"$COVERITY_TOOL_BASE"/coverity_tool.tgz
	}

	update_coverity_tools () {
	# Check for whether we need to download the Coverity tools
	# (either because we don't have a copy, or because it's out of date)
	# Assumes that COVERITY_TOOL_BASE, COVERITY_TOKEN and PROJNAME are set.

	mkdir -p "$COVERITY_TOOL_BASE"
	cd "$COVERITY_TOOL_BASE"

	echo "Checking for new version of coverity build tools..."
	wget https://scan.coverity.com/download/linux64 --post-data "token=$COVERITY_TOKEN&project=$PROJNAME&md5=1" -O coverity_tool.md5.new

	if ! cmp -s coverity_tool.md5 coverity_tool.md5.new; then
	# out of date md5 or no md5: download new build tool
	# blow away the old build tool
	echo "Downloading coverity build tools..."
	rm -rf coverity_tool coverity_tool.tgz
	wget https://scan.coverity.com/download/linux64 --post-data "token=$COVERITY_TOKEN&project=$PROJNAME" -O coverity_tool.tgz
	if ! (cat coverity_tool.md5.new; echo " coverity_tool.tgz") \| md5sum -c --status; then
	echo "Downloaded tarball didn't match md5sum!"
	exit 1
	fi

	if [ "$DOCKER" != yes ]; then
	# extract the new one, keeping it corralled in a 'coverity_tool' directory
	echo "Unpacking coverity build tools..."
	mkdir -p coverity_tool
	cd coverity_tool
	tar xf ../coverity_tool.tgz
	cd ..
	mv coverity_tool.md5.new coverity_tool.md5
	fi
	fi
	rm -f coverity_tool.md5.new
	cd "$SRCDIR"

	if [ "$DOCKER" = yes ]; then
	build_docker_image
	fi
	}


	# Check user-provided environment variables and arguments
	DRYRUN=no
	UPDATE=yes
	DOCKER=no

	while [ "$#" -ge 1 ]; do
	case "$1" in
	--dry-run)
	shift
	DRYRUN=yes
	;;
	--no-update-tools)
	shift
	UPDATE=no
	;;
	--update-tools-only)
	shift
	UPDATE=only
	;;
	--version)
	shift
	if [ $# -eq 0 ]; then
	echo "--version needs an argument"
	exit 1
	fi
	VERSION="$1"
	shift
	;;
	--description)
	shift
	if [ $# -eq 0 ]; then
	echo "--description needs an argument"
	exit 1
	fi
	DESCRIPTION="$1"
	shift
	;;
	--tokenfile)
	shift
	if [ $# -eq 0 ]; then
	echo "--tokenfile needs an argument"
	exit 1
	fi
	COVERITY_TOKEN="$(cat "$1")"
	shift
	;;
	--srcdir)
	shift
	if [ $# -eq 0 ]; then
	echo "--srcdir needs an argument"
	exit 1
	fi
	SRCDIR="$1"
	shift
	;;
	--results-tarball)
	shift
	if [ $# -eq 0 ]; then
	echo "--results-tarball needs an argument"
	exit 1
	fi
	RESULTSTARBALL="$1"
	shift
	;;
	--src-tarball)
	shift
	if [ $# -eq 0 ]; then
	echo "--src-tarball needs an argument"
	exit 1
	fi
	SRCTARBALL="$1"
	shift
	;;
	--docker)
	DOCKER=yes
	DOCKER_ENGINE=auto
	shift
	;;
	--docker-engine)
	shift
	if [ $# -eq 0 ]; then
	echo "--docker-engine needs an argument"
	exit 1
	fi
	DOCKER=yes
	DOCKER_ENGINE="$1"
	shift
	;;
	*)
	echo "Unexpected argument '$1'"
	exit 1
	;;
	esac
	done

	if [ -z "$COVERITY_TOKEN" ]; then
	COVERITY_TOKEN="$(git config coverity.token)"
	fi
	if [ -z "$COVERITY_TOKEN" ]; then
	echo "COVERITY_TOKEN environment variable not set"
	exit 1
	fi

	if [ -z "$COVERITY_BUILD_CMD" ]; then
	NPROC=$(nproc)
	COVERITY_BUILD_CMD="make -j$NPROC"
	echo "COVERITY_BUILD_CMD: using default '$COVERITY_BUILD_CMD'"
	fi

	if [ -z "$COVERITY_TOOL_BASE" ]; then
	echo "COVERITY_TOOL_BASE: using default /tmp/coverity-tools"
	COVERITY_TOOL_BASE=/tmp/coverity-tools
	fi

	if [ -z "$SRCDIR" ]; then
	SRCDIR="$PWD"
	fi

	PROJNAME=QEMU
	TARBALL=cov-int.tar.xz

	if [ "$UPDATE" = only ]; then
	# Just do the tools update; we don't need to check whether
	# we are in a source tree or have upload rights for this,
	# so do it before some of the command line and source tree checks.

	if [ "$DOCKER" = yes ] && [ ! -z "$SRCTARBALL" ]; then
	echo --update-tools-only --docker is incompatible with --src-tarball.
	exit 1
	fi

	update_coverity_tools
	exit 0
	fi

	if [ ! -e "$SRCDIR" ]; then
	mkdir "$SRCDIR"
	fi

	cd "$SRCDIR"

	if [ ! -z "$SRCTARBALL" ]; then
	echo "Untarring source tarball into $SRCDIR..."
	tar xvf "$SRCTARBALL"
	fi

	echo "Checking this is a QEMU source tree..."
	if ! [ -e "$SRCDIR/VERSION" ]; then
	echo "Not in a QEMU source tree?"
	exit 1
	fi

	# Fill in defaults used by the non-update-only process
	if [ -z "$VERSION" ]; then
	VERSION="$(git describe --always HEAD)"
	fi

	if [ -z "$DESCRIPTION" ]; then
	DESCRIPTION="$(git rev-parse HEAD)"
	fi

	if [ -z "$COVERITY_EMAIL" ]; then
	COVERITY_EMAIL="$(git config coverity.email)"
	fi
	if [ -z "$COVERITY_EMAIL" ]; then
	COVERITY_EMAIL="$(git config user.email)"
	fi

	# Otherwise, continue with the full build and upload process.

	check_upload_permissions

	if [ "$UPDATE" != no ]; then
	update_coverity_tools
	fi

	# Run ourselves inside docker if that's what the user wants
	if [ "$DOCKER" = yes ]; then
	# Put the Coverity token into a temporary file that only
	# we have read access to, and then pass it to docker build
	# using a volume. A volume is enough for the token not to
	# leak into the Docker image.
	umask 077
	SECRETDIR=$(mktemp -d)
	if [ -z "$SECRETDIR" ]; then
	echo "Failed to create temporary directory"
	exit 1
	fi
	trap 'rm -rf "$SECRETDIR"' INT TERM EXIT
	echo "Created temporary directory $SECRETDIR"
	SECRET="$SECRETDIR/token"
	echo "$COVERITY_TOKEN" > "$SECRET"
	echo "Archiving sources to be analyzed..."
	./scripts/archive-source.sh "$SECRETDIR/qemu-sources.tgz"
	ARGS="--no-update-tools"
	if [ "$DRYRUN" = yes ]; then
	ARGS="$ARGS --dry-run"
	fi
	echo "Running scanner..."
	# If we need to capture the output tarball, get the inner run to
	# save it to the secrets directory so we can copy it out before the
	# directory is cleaned up.
	if [ ! -z "$RESULTSTARBALL" ]; then
	ARGS="$ARGS --results-tarball /work/cov-int.tar.xz"
	fi
	# Arrange for this docker run to get access to the sources with -v.
	# We pass through all the configuration from the outer script to the inner.
	export COVERITY_EMAIL COVERITY_BUILD_CMD
	tests/docker/docker.py run -it --env COVERITY_EMAIL --env COVERITY_BUILD_CMD \
	-v "$SECRETDIR:/work" coverity-scanner \
	./run-coverity-scan --version "$VERSION" \
	--description "$DESCRIPTION" $ARGS --tokenfile /work/token \
	--srcdir /qemu --src-tarball /work/qemu-sources.tgz
	if [ ! -z "$RESULTSTARBALL" ]; then
	echo "Copying results tarball to $RESULTSTARBALL..."
	cp "$SECRETDIR/cov-int.tar.xz" "$RESULTSTARBALL"
	fi
	echo "Docker work complete."
	exit 0
	fi

	TOOLBIN="$(cd "$COVERITY_TOOL_BASE" && echo $PWD/coverity_tool/cov-analysis-*/bin)"

	if ! test -x "$TOOLBIN/cov-build"; then
	echo "Couldn't find cov-build in the coverity build-tool directory??"
	exit 1
	fi

	export PATH="$TOOLBIN:$PATH"

	cd "$SRCDIR"

	echo "Nuking build directory..."
	rm -rf +build
	mkdir +build
	cd +build

	echo "Configuring..."
	# We configure with a fixed set of enables here to ensure that we don't
	# accidentally reduce the scope of the analysis by doing the build on
	# the system that's missing a dependency that we need to build part of
	# the codebase.
	../configure --disable-modules --enable-sdl --enable-gtk \
	--enable-opengl --enable-vte --enable-gnutls \
	--enable-nettle --enable-curses --enable-curl \
	--audio-drv-list=oss,alsa,sdl,pa --enable-virtfs \
	--enable-vnc --enable-vnc-sasl --enable-vnc-jpeg --enable-png \
	--enable-xen --enable-brlapi \
	--enable-linux-aio --enable-attr \
	--enable-cap-ng --enable-trace-backends=log --enable-spice --enable-rbd \
	--enable-libusb --enable-usb-redir \
	--enable-libiscsi --enable-libnfs --enable-seccomp \
	--enable-tpm --enable-libssh --enable-lzo --enable-snappy --enable-bzip2 \
	--enable-numa --enable-rdma --enable-smartcard --enable-virglrenderer \
	--enable-mpath --enable-glusterfs \
	--enable-virtfs --enable-zstd

	echo "Running cov-build..."
	rm -rf cov-int
	mkdir cov-int
	cov-build --dir cov-int $COVERITY_BUILD_CMD

	echo "Creating results tarball..."
	tar cvf - cov-int \| xz > "$TARBALL"

	if [ ! -z "$RESULTSTARBALL" ]; then
	echo "Copying results tarball to $RESULTSTARBALL..."
	cp "$TARBALL" "$RESULTSTARBALL"
	fi

	echo "Uploading results tarball..."

	if [ "$DRYRUN" = yes ]; then
	echo "Dry run only, not uploading $TARBALL"
	exit 0
	fi

	curl --form token="$COVERITY_TOKEN" --form email="$COVERITY_EMAIL" \
	--form file=@"$TARBALL" --form version="$VERSION" \
	--form description="$DESCRIPTION" \
	https://scan.coverity.com/builds?project="$PROJNAME"

	echo "Done."