| /* |
| * VT82C686B south bridge support |
| * |
| * Copyright (c) 2008 yajin (yajin@vm-kernel.org) |
| * Copyright (c) 2009 chenming (chenming@rdc.faw.com.cn) |
| * Copyright (c) 2010 Huacai Chen (zltjiangshi@gmail.com) |
| * This code is licensed under the GNU GPL v2. |
| * |
| * Contributions after 2012-01-13 are licensed under the terms of the |
| * GNU GPL, version 2 or (at your option) any later version. |
| * |
| * VT8231 south bridge support and general clean up to allow it |
| * Copyright (c) 2018-2020 BALATON Zoltan |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "hw/isa/vt82c686.h" |
| #include "hw/block/fdc.h" |
| #include "hw/char/parallel-isa.h" |
| #include "hw/char/serial.h" |
| #include "hw/pci/pci.h" |
| #include "hw/qdev-properties.h" |
| #include "hw/ide/pci.h" |
| #include "hw/isa/isa.h" |
| #include "hw/isa/superio.h" |
| #include "hw/intc/i8259.h" |
| #include "hw/irq.h" |
| #include "hw/dma/i8257.h" |
| #include "hw/usb/hcd-uhci.h" |
| #include "hw/timer/i8254.h" |
| #include "hw/rtc/mc146818rtc.h" |
| #include "migration/vmstate.h" |
| #include "hw/isa/apm.h" |
| #include "hw/acpi/acpi.h" |
| #include "hw/i2c/pm_smbus.h" |
| #include "qapi/error.h" |
| #include "qemu/log.h" |
| #include "qemu/module.h" |
| #include "qemu/range.h" |
| #include "qemu/timer.h" |
| #include "trace.h" |
| |
| #define TYPE_VIA_PM "via-pm" |
| OBJECT_DECLARE_SIMPLE_TYPE(ViaPMState, VIA_PM) |
| |
| struct ViaPMState { |
| PCIDevice dev; |
| MemoryRegion io; |
| ACPIREGS ar; |
| APMState apm; |
| PMSMBus smb; |
| }; |
| |
| static void pm_io_space_update(ViaPMState *s) |
| { |
| uint32_t pmbase = pci_get_long(s->dev.config + 0x48) & 0xff80UL; |
| |
| memory_region_transaction_begin(); |
| memory_region_set_address(&s->io, pmbase); |
| memory_region_set_enabled(&s->io, s->dev.config[0x41] & BIT(7)); |
| memory_region_transaction_commit(); |
| } |
| |
| static void smb_io_space_update(ViaPMState *s) |
| { |
| uint32_t smbase = pci_get_long(s->dev.config + 0x90) & 0xfff0UL; |
| |
| memory_region_transaction_begin(); |
| memory_region_set_address(&s->smb.io, smbase); |
| memory_region_set_enabled(&s->smb.io, s->dev.config[0xd2] & BIT(0)); |
| memory_region_transaction_commit(); |
| } |
| |
| static int vmstate_acpi_post_load(void *opaque, int version_id) |
| { |
| ViaPMState *s = opaque; |
| |
| pm_io_space_update(s); |
| smb_io_space_update(s); |
| return 0; |
| } |
| |
| static const VMStateDescription vmstate_acpi = { |
| .name = "vt82c686b_pm", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .post_load = vmstate_acpi_post_load, |
| .fields = (const VMStateField[]) { |
| VMSTATE_PCI_DEVICE(dev, ViaPMState), |
| VMSTATE_UINT16(ar.pm1.evt.sts, ViaPMState), |
| VMSTATE_UINT16(ar.pm1.evt.en, ViaPMState), |
| VMSTATE_UINT16(ar.pm1.cnt.cnt, ViaPMState), |
| VMSTATE_STRUCT(apm, ViaPMState, 0, vmstate_apm, APMState), |
| VMSTATE_TIMER_PTR(ar.tmr.timer, ViaPMState), |
| VMSTATE_INT64(ar.tmr.overflow_time, ViaPMState), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static void pm_write_config(PCIDevice *d, uint32_t addr, uint32_t val, int len) |
| { |
| ViaPMState *s = VIA_PM(d); |
| |
| trace_via_pm_write(addr, val, len); |
| pci_default_write_config(d, addr, val, len); |
| if (ranges_overlap(addr, len, 0x48, 4)) { |
| uint32_t v = pci_get_long(s->dev.config + 0x48); |
| pci_set_long(s->dev.config + 0x48, (v & 0xff80UL) | 1); |
| } |
| if (range_covers_byte(addr, len, 0x41)) { |
| pm_io_space_update(s); |
| } |
| if (ranges_overlap(addr, len, 0x90, 4)) { |
| uint32_t v = pci_get_long(s->dev.config + 0x90); |
| pci_set_long(s->dev.config + 0x90, (v & 0xfff0UL) | 1); |
| } |
| if (range_covers_byte(addr, len, 0xd2)) { |
| s->dev.config[0xd2] &= 0xf; |
| smb_io_space_update(s); |
| } |
| } |
| |
| static void pm_io_write(void *op, hwaddr addr, uint64_t data, unsigned size) |
| { |
| trace_via_pm_io_write(addr, data, size); |
| } |
| |
| static uint64_t pm_io_read(void *op, hwaddr addr, unsigned size) |
| { |
| trace_via_pm_io_read(addr, 0, size); |
| return 0; |
| } |
| |
| static const MemoryRegionOps pm_io_ops = { |
| .read = pm_io_read, |
| .write = pm_io_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| .impl = { |
| .min_access_size = 1, |
| .max_access_size = 1, |
| }, |
| }; |
| |
| static void pm_update_sci(ViaPMState *s) |
| { |
| int sci_level, pmsts; |
| |
| pmsts = acpi_pm1_evt_get_sts(&s->ar); |
| sci_level = (((pmsts & s->ar.pm1.evt.en) & |
| (ACPI_BITMASK_RT_CLOCK_ENABLE | |
| ACPI_BITMASK_POWER_BUTTON_ENABLE | |
| ACPI_BITMASK_GLOBAL_LOCK_ENABLE | |
| ACPI_BITMASK_TIMER_ENABLE)) != 0); |
| if (pci_get_byte(s->dev.config + PCI_INTERRUPT_PIN)) { |
| /* |
| * FIXME: |
| * Fix device model that realizes this PM device and remove |
| * this work around. |
| * The device model should wire SCI and setup |
| * PCI_INTERRUPT_PIN properly. |
| * If PIN# = 0(interrupt pin isn't used), don't raise SCI as |
| * work around. |
| */ |
| pci_set_irq(&s->dev, sci_level); |
| } |
| /* schedule a timer interruption if needed */ |
| acpi_pm_tmr_update(&s->ar, (s->ar.pm1.evt.en & ACPI_BITMASK_TIMER_ENABLE) && |
| !(pmsts & ACPI_BITMASK_TIMER_STATUS)); |
| } |
| |
| static void pm_tmr_timer(ACPIREGS *ar) |
| { |
| ViaPMState *s = container_of(ar, ViaPMState, ar); |
| pm_update_sci(s); |
| } |
| |
| static void via_pm_reset(DeviceState *d) |
| { |
| ViaPMState *s = VIA_PM(d); |
| |
| memset(s->dev.config + PCI_CONFIG_HEADER_SIZE, 0, |
| PCI_CONFIG_SPACE_SIZE - PCI_CONFIG_HEADER_SIZE); |
| /* Power Management IO base */ |
| pci_set_long(s->dev.config + 0x48, 1); |
| /* SMBus IO base */ |
| pci_set_long(s->dev.config + 0x90, 1); |
| |
| acpi_pm1_evt_reset(&s->ar); |
| acpi_pm1_cnt_reset(&s->ar); |
| acpi_pm_tmr_reset(&s->ar); |
| pm_update_sci(s); |
| |
| pm_io_space_update(s); |
| smb_io_space_update(s); |
| } |
| |
| static void via_pm_realize(PCIDevice *dev, Error **errp) |
| { |
| ViaPMState *s = VIA_PM(dev); |
| |
| pci_set_word(dev->config + PCI_STATUS, PCI_STATUS_FAST_BACK | |
| PCI_STATUS_DEVSEL_MEDIUM); |
| |
| pm_smbus_init(DEVICE(s), &s->smb, false); |
| memory_region_add_subregion(pci_address_space_io(dev), 0, &s->smb.io); |
| memory_region_set_enabled(&s->smb.io, false); |
| |
| apm_init(dev, &s->apm, NULL, s); |
| |
| memory_region_init_io(&s->io, OBJECT(dev), &pm_io_ops, s, "via-pm", 128); |
| memory_region_add_subregion(pci_address_space_io(dev), 0, &s->io); |
| memory_region_set_enabled(&s->io, false); |
| |
| acpi_pm_tmr_init(&s->ar, pm_tmr_timer, &s->io); |
| acpi_pm1_evt_init(&s->ar, pm_tmr_timer, &s->io); |
| acpi_pm1_cnt_init(&s->ar, &s->io, false, false, 2, false); |
| } |
| |
| typedef struct via_pm_init_info { |
| uint16_t device_id; |
| } ViaPMInitInfo; |
| |
| static void via_pm_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); |
| ViaPMInitInfo *info = data; |
| |
| k->realize = via_pm_realize; |
| k->config_write = pm_write_config; |
| k->vendor_id = PCI_VENDOR_ID_VIA; |
| k->device_id = info->device_id; |
| k->class_id = PCI_CLASS_BRIDGE_OTHER; |
| k->revision = 0x40; |
| dc->reset = via_pm_reset; |
| /* Reason: part of VIA south bridge, does not exist stand alone */ |
| dc->user_creatable = false; |
| dc->vmsd = &vmstate_acpi; |
| } |
| |
| static const TypeInfo via_pm_info = { |
| .name = TYPE_VIA_PM, |
| .parent = TYPE_PCI_DEVICE, |
| .instance_size = sizeof(ViaPMState), |
| .abstract = true, |
| .interfaces = (InterfaceInfo[]) { |
| { INTERFACE_CONVENTIONAL_PCI_DEVICE }, |
| { }, |
| }, |
| }; |
| |
| static const ViaPMInitInfo vt82c686b_pm_init_info = { |
| .device_id = PCI_DEVICE_ID_VIA_82C686B_PM, |
| }; |
| |
| #define TYPE_VT82C686B_PM "vt82c686b-pm" |
| |
| static const TypeInfo vt82c686b_pm_info = { |
| .name = TYPE_VT82C686B_PM, |
| .parent = TYPE_VIA_PM, |
| .class_init = via_pm_class_init, |
| .class_data = (void *)&vt82c686b_pm_init_info, |
| }; |
| |
| static const ViaPMInitInfo vt8231_pm_init_info = { |
| .device_id = PCI_DEVICE_ID_VIA_8231_PM, |
| }; |
| |
| #define TYPE_VT8231_PM "vt8231-pm" |
| |
| static const TypeInfo vt8231_pm_info = { |
| .name = TYPE_VT8231_PM, |
| .parent = TYPE_VIA_PM, |
| .class_init = via_pm_class_init, |
| .class_data = (void *)&vt8231_pm_init_info, |
| }; |
| |
| |
| #define TYPE_VIA_SUPERIO "via-superio" |
| OBJECT_DECLARE_SIMPLE_TYPE(ViaSuperIOState, VIA_SUPERIO) |
| |
| struct ViaSuperIOState { |
| ISASuperIODevice superio; |
| uint8_t regs[0x100]; |
| const MemoryRegionOps *io_ops; |
| MemoryRegion io; |
| }; |
| |
| static inline void via_superio_io_enable(ViaSuperIOState *s, bool enable) |
| { |
| memory_region_set_enabled(&s->io, enable); |
| } |
| |
| static void via_superio_realize(DeviceState *d, Error **errp) |
| { |
| ViaSuperIOState *s = VIA_SUPERIO(d); |
| ISASuperIOClass *ic = ISA_SUPERIO_GET_CLASS(s); |
| Error *local_err = NULL; |
| |
| assert(s->io_ops); |
| ic->parent_realize(d, &local_err); |
| if (local_err) { |
| error_propagate(errp, local_err); |
| return; |
| } |
| memory_region_init_io(&s->io, OBJECT(d), s->io_ops, s, "via-superio", 2); |
| memory_region_set_enabled(&s->io, false); |
| /* The floppy also uses 0x3f0 and 0x3f1 but this seems to work anyway */ |
| memory_region_add_subregion(isa_address_space_io(ISA_DEVICE(s)), 0x3f0, |
| &s->io); |
| } |
| |
| static uint64_t via_superio_cfg_read(void *opaque, hwaddr addr, unsigned size) |
| { |
| ViaSuperIOState *sc = opaque; |
| uint8_t idx = sc->regs[0]; |
| uint8_t val = sc->regs[idx]; |
| |
| if (addr == 0) { |
| return idx; |
| } |
| if (addr == 1 && idx == 0) { |
| val = 0; /* reading reg 0 where we store index value */ |
| } |
| trace_via_superio_read(idx, val); |
| return val; |
| } |
| |
| static void via_superio_devices_enable(ViaSuperIOState *s, uint8_t data) |
| { |
| ISASuperIOClass *ic = ISA_SUPERIO_GET_CLASS(s); |
| |
| isa_parallel_set_enabled(s->superio.parallel[0], (data & 0x3) != 3); |
| for (int i = 0; i < ic->serial.count; i++) { |
| isa_serial_set_enabled(s->superio.serial[i], data & BIT(i + 2)); |
| } |
| isa_fdc_set_enabled(s->superio.floppy, data & BIT(4)); |
| } |
| |
| static void via_superio_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| ISASuperIOClass *sc = ISA_SUPERIO_CLASS(klass); |
| |
| device_class_set_parent_realize(dc, via_superio_realize, |
| &sc->parent_realize); |
| } |
| |
| static const TypeInfo via_superio_info = { |
| .name = TYPE_VIA_SUPERIO, |
| .parent = TYPE_ISA_SUPERIO, |
| .instance_size = sizeof(ViaSuperIOState), |
| .class_size = sizeof(ISASuperIOClass), |
| .class_init = via_superio_class_init, |
| .abstract = true, |
| }; |
| |
| #define TYPE_VT82C686B_SUPERIO "vt82c686b-superio" |
| |
| static void vt82c686b_superio_cfg_write(void *opaque, hwaddr addr, |
| uint64_t data, unsigned size) |
| { |
| ViaSuperIOState *sc = opaque; |
| uint8_t idx = sc->regs[0]; |
| |
| if (addr == 0) { /* config index register */ |
| sc->regs[0] = data; |
| return; |
| } |
| |
| /* config data register */ |
| trace_via_superio_write(idx, data); |
| switch (idx) { |
| case 0x00 ... 0xdf: |
| case 0xe4: |
| case 0xe5: |
| case 0xe9 ... 0xed: |
| case 0xf3: |
| case 0xf5: |
| case 0xf7: |
| case 0xf9 ... 0xfb: |
| case 0xfd ... 0xff: |
| /* ignore write to read only registers */ |
| return; |
| case 0xe2: |
| data &= 0x1f; |
| via_superio_devices_enable(sc, data); |
| break; |
| case 0xe3: |
| data &= 0xfc; |
| isa_fdc_set_iobase(sc->superio.floppy, data << 2); |
| break; |
| case 0xe6: |
| isa_parallel_set_iobase(sc->superio.parallel[0], data << 2); |
| break; |
| case 0xe7: |
| data &= 0xfe; |
| isa_serial_set_iobase(sc->superio.serial[0], data << 2); |
| break; |
| case 0xe8: |
| data &= 0xfe; |
| isa_serial_set_iobase(sc->superio.serial[1], data << 2); |
| break; |
| default: |
| qemu_log_mask(LOG_UNIMP, |
| "via_superio_cfg: unimplemented register 0x%x\n", idx); |
| break; |
| } |
| sc->regs[idx] = data; |
| } |
| |
| static const MemoryRegionOps vt82c686b_superio_cfg_ops = { |
| .read = via_superio_cfg_read, |
| .write = vt82c686b_superio_cfg_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| .impl = { |
| .min_access_size = 1, |
| .max_access_size = 1, |
| }, |
| }; |
| |
| static void vt82c686b_superio_reset(DeviceState *dev) |
| { |
| ViaSuperIOState *s = VIA_SUPERIO(dev); |
| |
| memset(s->regs, 0, sizeof(s->regs)); |
| /* Device ID */ |
| vt82c686b_superio_cfg_write(s, 0, 0xe0, 1); |
| vt82c686b_superio_cfg_write(s, 1, 0x3c, 1); |
| /* |
| * Function select - only serial enabled |
| * Fuloong 2e's rescue-yl prints to the serial console w/o enabling it. This |
| * suggests that the serial ports are enabled by default, so override the |
| * datasheet. |
| */ |
| vt82c686b_superio_cfg_write(s, 0, 0xe2, 1); |
| vt82c686b_superio_cfg_write(s, 1, 0x0f, 1); |
| /* Floppy ctrl base addr 0x3f0-7 */ |
| vt82c686b_superio_cfg_write(s, 0, 0xe3, 1); |
| vt82c686b_superio_cfg_write(s, 1, 0xfc, 1); |
| /* Parallel port base addr 0x378-f */ |
| vt82c686b_superio_cfg_write(s, 0, 0xe6, 1); |
| vt82c686b_superio_cfg_write(s, 1, 0xde, 1); |
| /* Serial port 1 base addr 0x3f8-f */ |
| vt82c686b_superio_cfg_write(s, 0, 0xe7, 1); |
| vt82c686b_superio_cfg_write(s, 1, 0xfe, 1); |
| /* Serial port 2 base addr 0x2f8-f */ |
| vt82c686b_superio_cfg_write(s, 0, 0xe8, 1); |
| vt82c686b_superio_cfg_write(s, 1, 0xbe, 1); |
| |
| vt82c686b_superio_cfg_write(s, 0, 0, 1); |
| } |
| |
| static void vt82c686b_superio_init(Object *obj) |
| { |
| VIA_SUPERIO(obj)->io_ops = &vt82c686b_superio_cfg_ops; |
| } |
| |
| static void vt82c686b_superio_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| ISASuperIOClass *sc = ISA_SUPERIO_CLASS(klass); |
| |
| dc->reset = vt82c686b_superio_reset; |
| sc->serial.count = 2; |
| sc->parallel.count = 1; |
| sc->ide.count = 0; /* emulated by via-ide */ |
| sc->floppy.count = 1; |
| } |
| |
| static const TypeInfo vt82c686b_superio_info = { |
| .name = TYPE_VT82C686B_SUPERIO, |
| .parent = TYPE_VIA_SUPERIO, |
| .instance_size = sizeof(ViaSuperIOState), |
| .instance_init = vt82c686b_superio_init, |
| .class_size = sizeof(ISASuperIOClass), |
| .class_init = vt82c686b_superio_class_init, |
| }; |
| |
| |
| #define TYPE_VT8231_SUPERIO "vt8231-superio" |
| |
| static void vt8231_superio_cfg_write(void *opaque, hwaddr addr, |
| uint64_t data, unsigned size) |
| { |
| ViaSuperIOState *sc = opaque; |
| uint8_t idx = sc->regs[0]; |
| |
| if (addr == 0) { /* config index register */ |
| sc->regs[0] = data; |
| return; |
| } |
| |
| /* config data register */ |
| trace_via_superio_write(idx, data); |
| switch (idx) { |
| case 0x00 ... 0xdf: |
| case 0xe7 ... 0xef: |
| case 0xf0 ... 0xf1: |
| case 0xf5: |
| case 0xf8: |
| case 0xfd: |
| /* ignore write to read only registers */ |
| return; |
| case 0xf2: |
| data &= 0x17; |
| via_superio_devices_enable(sc, data); |
| break; |
| case 0xf4: |
| data &= 0xfe; |
| isa_serial_set_iobase(sc->superio.serial[0], data << 2); |
| break; |
| case 0xf6: |
| isa_parallel_set_iobase(sc->superio.parallel[0], data << 2); |
| break; |
| case 0xf7: |
| data &= 0xfc; |
| isa_fdc_set_iobase(sc->superio.floppy, data << 2); |
| break; |
| default: |
| qemu_log_mask(LOG_UNIMP, |
| "via_superio_cfg: unimplemented register 0x%x\n", idx); |
| break; |
| } |
| sc->regs[idx] = data; |
| } |
| |
| static const MemoryRegionOps vt8231_superio_cfg_ops = { |
| .read = via_superio_cfg_read, |
| .write = vt8231_superio_cfg_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| .impl = { |
| .min_access_size = 1, |
| .max_access_size = 1, |
| }, |
| }; |
| |
| static void vt8231_superio_reset(DeviceState *dev) |
| { |
| ViaSuperIOState *s = VIA_SUPERIO(dev); |
| |
| memset(s->regs, 0, sizeof(s->regs)); |
| /* Device ID */ |
| s->regs[0xf0] = 0x3c; |
| /* Device revision */ |
| s->regs[0xf1] = 0x01; |
| /* Function select - all disabled */ |
| vt8231_superio_cfg_write(s, 0, 0xf2, 1); |
| vt8231_superio_cfg_write(s, 1, 0x03, 1); |
| /* Serial port base addr */ |
| vt8231_superio_cfg_write(s, 0, 0xf4, 1); |
| vt8231_superio_cfg_write(s, 1, 0xfe, 1); |
| /* Parallel port base addr */ |
| vt8231_superio_cfg_write(s, 0, 0xf6, 1); |
| vt8231_superio_cfg_write(s, 1, 0xde, 1); |
| /* Floppy ctrl base addr */ |
| vt8231_superio_cfg_write(s, 0, 0xf7, 1); |
| vt8231_superio_cfg_write(s, 1, 0xfc, 1); |
| |
| vt8231_superio_cfg_write(s, 0, 0, 1); |
| } |
| |
| static void vt8231_superio_init(Object *obj) |
| { |
| VIA_SUPERIO(obj)->io_ops = &vt8231_superio_cfg_ops; |
| } |
| |
| static void vt8231_superio_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| ISASuperIOClass *sc = ISA_SUPERIO_CLASS(klass); |
| |
| dc->reset = vt8231_superio_reset; |
| sc->serial.count = 1; |
| sc->parallel.count = 1; |
| sc->ide.count = 0; /* emulated by via-ide */ |
| sc->floppy.count = 1; |
| } |
| |
| static const TypeInfo vt8231_superio_info = { |
| .name = TYPE_VT8231_SUPERIO, |
| .parent = TYPE_VIA_SUPERIO, |
| .instance_size = sizeof(ViaSuperIOState), |
| .instance_init = vt8231_superio_init, |
| .class_size = sizeof(ISASuperIOClass), |
| .class_init = vt8231_superio_class_init, |
| }; |
| |
| |
| #define TYPE_VIA_ISA "via-isa" |
| OBJECT_DECLARE_SIMPLE_TYPE(ViaISAState, VIA_ISA) |
| |
| struct ViaISAState { |
| PCIDevice dev; |
| qemu_irq cpu_intr; |
| qemu_irq *isa_irqs_in; |
| uint16_t irq_state[ISA_NUM_IRQS]; |
| ViaSuperIOState via_sio; |
| MC146818RtcState rtc; |
| PCIIDEState ide; |
| UHCIState uhci[2]; |
| ViaPMState pm; |
| ViaAC97State ac97; |
| PCIDevice mc97; |
| }; |
| |
| static const VMStateDescription vmstate_via = { |
| .name = "via-isa", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (const VMStateField[]) { |
| VMSTATE_PCI_DEVICE(dev, ViaISAState), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static void via_isa_init(Object *obj) |
| { |
| ViaISAState *s = VIA_ISA(obj); |
| |
| object_initialize_child(obj, "rtc", &s->rtc, TYPE_MC146818_RTC); |
| object_initialize_child(obj, "ide", &s->ide, TYPE_VIA_IDE); |
| object_initialize_child(obj, "uhci1", &s->uhci[0], TYPE_VT82C686B_USB_UHCI); |
| object_initialize_child(obj, "uhci2", &s->uhci[1], TYPE_VT82C686B_USB_UHCI); |
| object_initialize_child(obj, "ac97", &s->ac97, TYPE_VIA_AC97); |
| object_initialize_child(obj, "mc97", &s->mc97, TYPE_VIA_MC97); |
| } |
| |
| static const TypeInfo via_isa_info = { |
| .name = TYPE_VIA_ISA, |
| .parent = TYPE_PCI_DEVICE, |
| .instance_size = sizeof(ViaISAState), |
| .instance_init = via_isa_init, |
| .abstract = true, |
| .interfaces = (InterfaceInfo[]) { |
| { INTERFACE_CONVENTIONAL_PCI_DEVICE }, |
| { }, |
| }, |
| }; |
| |
| static int via_isa_get_pci_irq(const ViaISAState *s, int pin) |
| { |
| switch (pin) { |
| case 0: |
| return s->dev.config[0x55] >> 4; |
| case 1: |
| return s->dev.config[0x56] & 0xf; |
| case 2: |
| return s->dev.config[0x56] >> 4; |
| case 3: |
| return s->dev.config[0x57] >> 4; |
| } |
| return 0; |
| } |
| |
| void via_isa_set_irq(PCIDevice *d, int pin, int level) |
| { |
| ViaISAState *s = VIA_ISA(pci_get_function_0(d)); |
| uint8_t irq = d->config[PCI_INTERRUPT_LINE], max_irq = 15; |
| int f = PCI_FUNC(d->devfn); |
| uint16_t mask; |
| |
| switch (f) { |
| case 0: /* PIRQ/PINT inputs */ |
| irq = via_isa_get_pci_irq(s, pin); |
| f = 8 + pin; /* Use function 8-11 for PCI interrupt inputs */ |
| break; |
| case 2: /* USB ports 0-1 */ |
| case 3: /* USB ports 2-3 */ |
| case 5: /* AC97 audio */ |
| max_irq = 14; |
| break; |
| } |
| |
| /* Keep track of the state of all sources */ |
| mask = BIT(f); |
| if (level) { |
| s->irq_state[0] |= mask; |
| } else { |
| s->irq_state[0] &= ~mask; |
| } |
| if (irq == 0 || irq == 0xff) { |
| return; /* disabled */ |
| } |
| if (unlikely(irq > max_irq || irq == 2)) { |
| qemu_log_mask(LOG_GUEST_ERROR, "Invalid ISA IRQ routing %d for %d", |
| irq, f); |
| return; |
| } |
| /* Record source state at mapped IRQ */ |
| if (level) { |
| s->irq_state[irq] |= mask; |
| } else { |
| s->irq_state[irq] &= ~mask; |
| } |
| /* Make sure there are no stuck bits if mapping has changed */ |
| s->irq_state[irq] &= s->irq_state[0]; |
| /* ISA IRQ level is the OR of all sources routed to it */ |
| qemu_set_irq(s->isa_irqs_in[irq], !!s->irq_state[irq]); |
| } |
| |
| static void via_isa_pirq(void *opaque, int pin, int level) |
| { |
| via_isa_set_irq(opaque, pin, level); |
| } |
| |
| static void via_isa_request_i8259_irq(void *opaque, int irq, int level) |
| { |
| ViaISAState *s = opaque; |
| qemu_set_irq(s->cpu_intr, level); |
| } |
| |
| static void via_isa_realize(PCIDevice *d, Error **errp) |
| { |
| ViaISAState *s = VIA_ISA(d); |
| DeviceState *dev = DEVICE(d); |
| PCIBus *pci_bus = pci_get_bus(d); |
| qemu_irq *isa_irq; |
| ISABus *isa_bus; |
| int i; |
| |
| qdev_init_gpio_out_named(dev, &s->cpu_intr, "intr", 1); |
| qdev_init_gpio_in_named(dev, via_isa_pirq, "pirq", PCI_NUM_PINS); |
| isa_irq = qemu_allocate_irqs(via_isa_request_i8259_irq, s, 1); |
| isa_bus = isa_bus_new(dev, pci_address_space(d), pci_address_space_io(d), |
| errp); |
| |
| if (!isa_bus) { |
| return; |
| } |
| |
| s->isa_irqs_in = i8259_init(isa_bus, *isa_irq); |
| isa_bus_register_input_irqs(isa_bus, s->isa_irqs_in); |
| i8254_pit_init(isa_bus, 0x40, 0, NULL); |
| i8257_dma_init(OBJECT(d), isa_bus, 0); |
| |
| /* RTC */ |
| qdev_prop_set_int32(DEVICE(&s->rtc), "base_year", 2000); |
| if (!qdev_realize(DEVICE(&s->rtc), BUS(isa_bus), errp)) { |
| return; |
| } |
| isa_connect_gpio_out(ISA_DEVICE(&s->rtc), 0, s->rtc.isairq); |
| |
| for (i = 0; i < PCI_CONFIG_HEADER_SIZE; i++) { |
| if (i < PCI_COMMAND || i >= PCI_REVISION_ID) { |
| d->wmask[i] = 0; |
| } |
| } |
| |
| /* Super I/O */ |
| if (!qdev_realize(DEVICE(&s->via_sio), BUS(isa_bus), errp)) { |
| return; |
| } |
| |
| /* Function 1: IDE */ |
| qdev_prop_set_int32(DEVICE(&s->ide), "addr", d->devfn + 1); |
| if (!qdev_realize(DEVICE(&s->ide), BUS(pci_bus), errp)) { |
| return; |
| } |
| for (i = 0; i < 2; i++) { |
| qdev_connect_gpio_out_named(DEVICE(&s->ide), "isa-irq", i, |
| s->isa_irqs_in[14 + i]); |
| } |
| |
| /* Functions 2-3: USB Ports */ |
| for (i = 0; i < ARRAY_SIZE(s->uhci); i++) { |
| qdev_prop_set_int32(DEVICE(&s->uhci[i]), "addr", d->devfn + 2 + i); |
| if (!qdev_realize(DEVICE(&s->uhci[i]), BUS(pci_bus), errp)) { |
| return; |
| } |
| } |
| |
| /* Function 4: Power Management */ |
| qdev_prop_set_int32(DEVICE(&s->pm), "addr", d->devfn + 4); |
| if (!qdev_realize(DEVICE(&s->pm), BUS(pci_bus), errp)) { |
| return; |
| } |
| |
| /* Function 5: AC97 Audio */ |
| qdev_prop_set_int32(DEVICE(&s->ac97), "addr", d->devfn + 5); |
| if (!qdev_realize(DEVICE(&s->ac97), BUS(pci_bus), errp)) { |
| return; |
| } |
| |
| /* Function 6: MC97 Modem */ |
| qdev_prop_set_int32(DEVICE(&s->mc97), "addr", d->devfn + 6); |
| if (!qdev_realize(DEVICE(&s->mc97), BUS(pci_bus), errp)) { |
| return; |
| } |
| } |
| |
| /* TYPE_VT82C686B_ISA */ |
| |
| static void vt82c686b_write_config(PCIDevice *d, uint32_t addr, |
| uint32_t val, int len) |
| { |
| ViaISAState *s = VIA_ISA(d); |
| |
| trace_via_isa_write(addr, val, len); |
| pci_default_write_config(d, addr, val, len); |
| if (addr == 0x85) { |
| /* BIT(1): enable or disable superio config io ports */ |
| via_superio_io_enable(&s->via_sio, val & BIT(1)); |
| } |
| } |
| |
| static void vt82c686b_isa_reset(DeviceState *dev) |
| { |
| ViaISAState *s = VIA_ISA(dev); |
| uint8_t *pci_conf = s->dev.config; |
| |
| pci_set_long(pci_conf + PCI_CAPABILITY_LIST, 0x000000c0); |
| pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_IO | PCI_COMMAND_MEMORY | |
| PCI_COMMAND_MASTER | PCI_COMMAND_SPECIAL); |
| pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM); |
| |
| pci_conf[0x48] = 0x01; /* Miscellaneous Control 3 */ |
| pci_conf[0x4a] = 0x04; /* IDE interrupt Routing */ |
| pci_conf[0x4f] = 0x03; /* DMA/Master Mem Access Control 3 */ |
| pci_conf[0x50] = 0x2d; /* PnP DMA Request Control */ |
| pci_conf[0x59] = 0x04; |
| pci_conf[0x5a] = 0x04; /* KBC/RTC Control*/ |
| pci_conf[0x5f] = 0x04; |
| pci_conf[0x77] = 0x10; /* GPIO Control 1/2/3/4 */ |
| } |
| |
| static void vt82c686b_init(Object *obj) |
| { |
| ViaISAState *s = VIA_ISA(obj); |
| |
| object_initialize_child(obj, "sio", &s->via_sio, TYPE_VT82C686B_SUPERIO); |
| object_initialize_child(obj, "pm", &s->pm, TYPE_VT82C686B_PM); |
| } |
| |
| static void vt82c686b_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); |
| |
| k->realize = via_isa_realize; |
| k->config_write = vt82c686b_write_config; |
| k->vendor_id = PCI_VENDOR_ID_VIA; |
| k->device_id = PCI_DEVICE_ID_VIA_82C686B_ISA; |
| k->class_id = PCI_CLASS_BRIDGE_ISA; |
| k->revision = 0x40; |
| dc->reset = vt82c686b_isa_reset; |
| dc->desc = "ISA bridge"; |
| dc->vmsd = &vmstate_via; |
| /* Reason: part of VIA VT82C686 southbridge, needs to be wired up */ |
| dc->user_creatable = false; |
| } |
| |
| static const TypeInfo vt82c686b_isa_info = { |
| .name = TYPE_VT82C686B_ISA, |
| .parent = TYPE_VIA_ISA, |
| .instance_size = sizeof(ViaISAState), |
| .instance_init = vt82c686b_init, |
| .class_init = vt82c686b_class_init, |
| }; |
| |
| /* TYPE_VT8231_ISA */ |
| |
| static void vt8231_write_config(PCIDevice *d, uint32_t addr, |
| uint32_t val, int len) |
| { |
| ViaISAState *s = VIA_ISA(d); |
| |
| trace_via_isa_write(addr, val, len); |
| pci_default_write_config(d, addr, val, len); |
| if (addr == 0x50) { |
| /* BIT(2): enable or disable superio config io ports */ |
| via_superio_io_enable(&s->via_sio, val & BIT(2)); |
| } |
| } |
| |
| static void vt8231_isa_reset(DeviceState *dev) |
| { |
| ViaISAState *s = VIA_ISA(dev); |
| uint8_t *pci_conf = s->dev.config; |
| |
| pci_set_long(pci_conf + PCI_CAPABILITY_LIST, 0x000000c0); |
| pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_IO | PCI_COMMAND_MEMORY | |
| PCI_COMMAND_MASTER | PCI_COMMAND_SPECIAL); |
| pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM); |
| |
| pci_conf[0x4c] = 0x04; /* IDE interrupt Routing */ |
| pci_conf[0x58] = 0x40; /* Miscellaneous Control 0 */ |
| pci_conf[0x67] = 0x08; /* Fast IR Config */ |
| pci_conf[0x6b] = 0x01; /* Fast IR I/O Base */ |
| } |
| |
| static void vt8231_init(Object *obj) |
| { |
| ViaISAState *s = VIA_ISA(obj); |
| |
| object_initialize_child(obj, "sio", &s->via_sio, TYPE_VT8231_SUPERIO); |
| object_initialize_child(obj, "pm", &s->pm, TYPE_VT8231_PM); |
| } |
| |
| static void vt8231_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); |
| |
| k->realize = via_isa_realize; |
| k->config_write = vt8231_write_config; |
| k->vendor_id = PCI_VENDOR_ID_VIA; |
| k->device_id = PCI_DEVICE_ID_VIA_8231_ISA; |
| k->class_id = PCI_CLASS_BRIDGE_ISA; |
| k->revision = 0x10; |
| dc->reset = vt8231_isa_reset; |
| dc->desc = "ISA bridge"; |
| dc->vmsd = &vmstate_via; |
| /* Reason: part of VIA VT8231 southbridge, needs to be wired up */ |
| dc->user_creatable = false; |
| } |
| |
| static const TypeInfo vt8231_isa_info = { |
| .name = TYPE_VT8231_ISA, |
| .parent = TYPE_VIA_ISA, |
| .instance_size = sizeof(ViaISAState), |
| .instance_init = vt8231_init, |
| .class_init = vt8231_class_init, |
| }; |
| |
| |
| static void vt82c686b_register_types(void) |
| { |
| type_register_static(&via_pm_info); |
| type_register_static(&vt82c686b_pm_info); |
| type_register_static(&vt8231_pm_info); |
| type_register_static(&via_superio_info); |
| type_register_static(&vt82c686b_superio_info); |
| type_register_static(&vt8231_superio_info); |
| type_register_static(&via_isa_info); |
| type_register_static(&vt82c686b_isa_info); |
| type_register_static(&vt8231_isa_info); |
| } |
| |
| type_init(vt82c686b_register_types) |