hw/i2c/bcm2835_i2c.c - qemu - Git at Google

 /*
  * Broadcom Serial Controller (BSC)
  *
  * Copyright (c) 2024 Rayhan Faizel <rayhan.faizel@gmail.com>
  *
  * SPDX-License-Identifier: MIT
  *
  * Permission is hereby granted, free of charge, to any person obtaining a copy
  * of this software and associated documentation files (the "Software"), to deal
  * in the Software without restriction, including without limitation the rights
  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
  * copies of the Software, and to permit persons to whom the Software is
  * furnished to do so, subject to the following conditions:
  *
  * The above copyright notice and this permission notice shall be included in
  * all copies or substantial portions of the Software.
  *
  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  * THE SOFTWARE.
  */

 #include "qemu/osdep.h"
 #include "qemu/log.h"
 #include "hw/i2c/bcm2835_i2c.h"
 #include "hw/irq.h"
 #include "migration/vmstate.h"

 static void bcm2835_i2c_update_interrupt(BCM2835I2CState *s)
 {
     int do_interrupt = 0;
     /* Interrupt on RXR (Needs reading) */
     if (s->c & BCM2835_I2C_C_INTR && s->s & BCM2835_I2C_S_RXR) {
         do_interrupt = 1;
     }

     /* Interrupt on TXW (Needs writing) */
     if (s->c & BCM2835_I2C_C_INTT && s->s & BCM2835_I2C_S_TXW) {
         do_interrupt = 1;
     }

     /* Interrupt on DONE (Transfer complete) */
     if (s->c & BCM2835_I2C_C_INTD && s->s & BCM2835_I2C_S_DONE) {
         do_interrupt = 1;
     }
     qemu_set_irq(s->irq, do_interrupt);
 }

 static void bcm2835_i2c_begin_transfer(BCM2835I2CState *s)
 {
     int direction = s->c & BCM2835_I2C_C_READ;
     if (i2c_start_transfer(s->bus, s->a, direction)) {
         s->s |= BCM2835_I2C_S_ERR;
     }
     s->s |= BCM2835_I2C_S_TA;

     if (direction) {
         s->s |= BCM2835_I2C_S_RXR | BCM2835_I2C_S_RXD;
     } else {
         s->s |= BCM2835_I2C_S_TXW;
     }
 }

 static void bcm2835_i2c_finish_transfer(BCM2835I2CState *s)
 {
     /*
      * STOP is sent when DLEN counts down to zero.
      *
      * https://github.com/torvalds/linux/blob/v6.7/drivers/i2c/busses/i2c-bcm2835.c#L223-L261
      * It is possible to initiate repeated starts on real hardware.
      * However, this requires sending another ST request before the bytes in
      * TX FIFO are shifted out.
      *
      * This is not emulated currently.
      */
     i2c_end_transfer(s->bus);
     s->s |= BCM2835_I2C_S_DONE;

     /* Ensure RXD is cleared, otherwise the driver registers an error */
     s->s &= ~(BCM2835_I2C_S_TA | BCM2835_I2C_S_RXR |
               BCM2835_I2C_S_TXW | BCM2835_I2C_S_RXD);
 }

 static uint64_t bcm2835_i2c_read(void *opaque, hwaddr addr, unsigned size)
 {
     BCM2835I2CState *s = opaque;
     uint32_t readval = 0;

     switch (addr) {
     case BCM2835_I2C_C:
         readval = s->c;
         break;
     case BCM2835_I2C_S:
         readval = s->s;
         break;
     case BCM2835_I2C_DLEN:
         readval = s->dlen;
         break;
     case BCM2835_I2C_A:
         readval = s->a;
         break;
     case BCM2835_I2C_FIFO:
         /* We receive I2C messages directly instead of using FIFOs */
         if (s->s & BCM2835_I2C_S_TA) {
             readval = i2c_recv(s->bus);
             s->dlen -= 1;

             if (s->dlen == 0) {
                 bcm2835_i2c_finish_transfer(s);
             }
         }
         bcm2835_i2c_update_interrupt(s);
         break;
     case BCM2835_I2C_DIV:
         readval = s->div;
         break;
     case BCM2835_I2C_DEL:
         readval = s->del;
         break;
     case BCM2835_I2C_CLKT:
         readval = s->clkt;
         break;
     default:
         qemu_log_mask(LOG_GUEST_ERROR,
                       "%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, addr);
     }

     return readval;
 }

 static void bcm2835_i2c_write(void *opaque, hwaddr addr,
                               uint64_t value, unsigned int size)
 {
     BCM2835I2CState *s = opaque;
     uint32_t writeval = value;

     switch (addr) {
     case BCM2835_I2C_C:
         /* ST is a one-shot operation; it must read back as 0 */
         s->c = writeval & ~BCM2835_I2C_C_ST;

         /* Start transfer */
         if (writeval & (BCM2835_I2C_C_ST | BCM2835_I2C_C_I2CEN)) {
             bcm2835_i2c_begin_transfer(s);
             /*
              * Handle special case where transfer starts with zero data length.
              * Required for zero length i2c quick messages to work.
              */
             if (s->dlen == 0) {
                 bcm2835_i2c_finish_transfer(s);
             }
         }

         bcm2835_i2c_update_interrupt(s);
         break;
     case BCM2835_I2C_S:
         if (writeval & BCM2835_I2C_S_DONE && s->s & BCM2835_I2C_S_DONE) {
             /* When DONE is cleared, DLEN should read last written value. */
             s->dlen = s->last_dlen;
         }

         /* Clear DONE, CLKT and ERR by writing 1 */
         s->s &= ~(writeval & (BCM2835_I2C_S_DONE |
                   BCM2835_I2C_S_ERR | BCM2835_I2C_S_CLKT));
         break;
     case BCM2835_I2C_DLEN:
         s->dlen = writeval;
         s->last_dlen = writeval;
         break;
     case BCM2835_I2C_A:
         s->a = writeval;
         break;
     case BCM2835_I2C_FIFO:
         /* We send I2C messages directly instead of using FIFOs */
         if (s->s & BCM2835_I2C_S_TA) {
             if (s->s & BCM2835_I2C_S_TXD) {
                 if (!i2c_send(s->bus, writeval & 0xff)) {
                     s->dlen -= 1;
                 } else {
                     s->s |= BCM2835_I2C_S_ERR;
                 }
             }

             if (s->dlen == 0) {
                 bcm2835_i2c_finish_transfer(s);
             }
         }
         bcm2835_i2c_update_interrupt(s);
         break;
     case BCM2835_I2C_DIV:
         s->div = writeval;
         break;
     case BCM2835_I2C_DEL:
         s->del = writeval;
         break;
     case BCM2835_I2C_CLKT:
         s->clkt = writeval;
         break;
     default:
         qemu_log_mask(LOG_GUEST_ERROR,
                       "%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, addr);
     }
 }

 static const MemoryRegionOps bcm2835_i2c_ops = {
     .read = bcm2835_i2c_read,
     .write = bcm2835_i2c_write,
     .endianness = DEVICE_NATIVE_ENDIAN,
     .valid = {
         .min_access_size = 4,
         .max_access_size = 4,
     },
 };

 static void bcm2835_i2c_realize(DeviceState *dev, Error **errp)
 {
     BCM2835I2CState *s = BCM2835_I2C(dev);
     s->bus = i2c_init_bus(dev, NULL);

     memory_region_init_io(&s->iomem, OBJECT(dev), &bcm2835_i2c_ops, s,
                           TYPE_BCM2835_I2C, 0x24);
     sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->iomem);
     sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq);
 }

 static void bcm2835_i2c_reset(DeviceState *dev)
 {
     BCM2835I2CState *s = BCM2835_I2C(dev);

     /* Reset values according to BCM2835 Peripheral Documentation */
     s->c = 0x0;
     s->s = BCM2835_I2C_S_TXD | BCM2835_I2C_S_TXE;
     s->dlen = 0x0;
     s->a = 0x0;
     s->div = 0x5dc;
     s->del = 0x00300030;
     s->clkt = 0x40;
 }

 static const VMStateDescription vmstate_bcm2835_i2c = {
     .name = TYPE_BCM2835_I2C,
     .version_id = 1,
     .minimum_version_id = 1,
     .fields = (const VMStateField[]) {
         VMSTATE_UINT32(c, BCM2835I2CState),
         VMSTATE_UINT32(s, BCM2835I2CState),
         VMSTATE_UINT32(dlen, BCM2835I2CState),
         VMSTATE_UINT32(a, BCM2835I2CState),
         VMSTATE_UINT32(div, BCM2835I2CState),
         VMSTATE_UINT32(del, BCM2835I2CState),
         VMSTATE_UINT32(clkt, BCM2835I2CState),
         VMSTATE_UINT32(last_dlen, BCM2835I2CState),
         VMSTATE_END_OF_LIST()
     }
 };

 static void bcm2835_i2c_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);

     device_class_set_legacy_reset(dc, bcm2835_i2c_reset);
     dc->realize = bcm2835_i2c_realize;
     dc->vmsd = &vmstate_bcm2835_i2c;
 }

 static const TypeInfo bcm2835_i2c_info = {
     .name = TYPE_BCM2835_I2C,
     .parent = TYPE_SYS_BUS_DEVICE,
     .instance_size = sizeof(BCM2835I2CState),
     .class_init = bcm2835_i2c_class_init,
 };

 static void bcm2835_i2c_register_types(void)
 {
     type_register_static(&bcm2835_i2c_info);
 }

 type_init(bcm2835_i2c_register_types)
	/*
	* Broadcom Serial Controller (BSC)
	*
	* Copyright (c) 2024 Rayhan Faizel <rayhan.faizel@gmail.com>
	*
	* SPDX-License-Identifier: MIT
	*
	* Permission is hereby granted, free of charge, to any person obtaining a copy
	* of this software and associated documentation files (the "Software"), to deal
	* in the Software without restriction, including without limitation the rights
	* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
	* copies of the Software, and to permit persons to whom the Software is
	* furnished to do so, subject to the following conditions:
	*
	* The above copyright notice and this permission notice shall be included in
	* all copies or substantial portions of the Software.
	*
	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
	* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
	* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
	* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
	* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
	* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
	* THE SOFTWARE.
	*/

	#include "qemu/osdep.h"
	#include "qemu/log.h"
	#include "hw/i2c/bcm2835_i2c.h"
	#include "hw/irq.h"
	#include "migration/vmstate.h"

	static void bcm2835_i2c_update_interrupt(BCM2835I2CState *s)
	{
	int do_interrupt = 0;
	/* Interrupt on RXR (Needs reading) */
	if (s->c & BCM2835_I2C_C_INTR && s->s & BCM2835_I2C_S_RXR) {
	do_interrupt = 1;
	}

	/* Interrupt on TXW (Needs writing) */
	if (s->c & BCM2835_I2C_C_INTT && s->s & BCM2835_I2C_S_TXW) {
	do_interrupt = 1;
	}

	/* Interrupt on DONE (Transfer complete) */
	if (s->c & BCM2835_I2C_C_INTD && s->s & BCM2835_I2C_S_DONE) {
	do_interrupt = 1;
	}
	qemu_set_irq(s->irq, do_interrupt);
	}

	static void bcm2835_i2c_begin_transfer(BCM2835I2CState *s)
	{
	int direction = s->c & BCM2835_I2C_C_READ;
	if (i2c_start_transfer(s->bus, s->a, direction)) {
	s->s \|= BCM2835_I2C_S_ERR;
	}
	s->s \|= BCM2835_I2C_S_TA;

	if (direction) {
	s->s \|= BCM2835_I2C_S_RXR \| BCM2835_I2C_S_RXD;
	} else {
	s->s \|= BCM2835_I2C_S_TXW;
	}
	}

	static void bcm2835_i2c_finish_transfer(BCM2835I2CState *s)
	{
	/*
	* STOP is sent when DLEN counts down to zero.
	*
	* https://github.com/torvalds/linux/blob/v6.7/drivers/i2c/busses/i2c-bcm2835.c#L223-L261
	* It is possible to initiate repeated starts on real hardware.
	* However, this requires sending another ST request before the bytes in
	* TX FIFO are shifted out.
	*
	* This is not emulated currently.
	*/
	i2c_end_transfer(s->bus);
	s->s \|= BCM2835_I2C_S_DONE;

	/* Ensure RXD is cleared, otherwise the driver registers an error */
	s->s &= ~(BCM2835_I2C_S_TA \| BCM2835_I2C_S_RXR \|
	BCM2835_I2C_S_TXW \| BCM2835_I2C_S_RXD);
	}

	static uint64_t bcm2835_i2c_read(void *opaque, hwaddr addr, unsigned size)
	{
	BCM2835I2CState *s = opaque;
	uint32_t readval = 0;

	switch (addr) {
	case BCM2835_I2C_C:
	readval = s->c;
	break;
	case BCM2835_I2C_S:
	readval = s->s;
	break;
	case BCM2835_I2C_DLEN:
	readval = s->dlen;
	break;
	case BCM2835_I2C_A:
	readval = s->a;
	break;
	case BCM2835_I2C_FIFO:
	/* We receive I2C messages directly instead of using FIFOs */
	if (s->s & BCM2835_I2C_S_TA) {
	readval = i2c_recv(s->bus);
	s->dlen -= 1;

	if (s->dlen == 0) {
	bcm2835_i2c_finish_transfer(s);
	}
	}
	bcm2835_i2c_update_interrupt(s);
	break;
	case BCM2835_I2C_DIV:
	readval = s->div;
	break;
	case BCM2835_I2C_DEL:
	readval = s->del;
	break;
	case BCM2835_I2C_CLKT:
	readval = s->clkt;
	break;
	default:
	qemu_log_mask(LOG_GUEST_ERROR,
	"%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, addr);
	}

	return readval;
	}

	static void bcm2835_i2c_write(void *opaque, hwaddr addr,
	uint64_t value, unsigned int size)
	{
	BCM2835I2CState *s = opaque;
	uint32_t writeval = value;

	switch (addr) {
	case BCM2835_I2C_C:
	/* ST is a one-shot operation; it must read back as 0 */
	s->c = writeval & ~BCM2835_I2C_C_ST;

	/* Start transfer */
	if (writeval & (BCM2835_I2C_C_ST \| BCM2835_I2C_C_I2CEN)) {
	bcm2835_i2c_begin_transfer(s);
	/*
	* Handle special case where transfer starts with zero data length.
	* Required for zero length i2c quick messages to work.
	*/
	if (s->dlen == 0) {
	bcm2835_i2c_finish_transfer(s);
	}
	}

	bcm2835_i2c_update_interrupt(s);
	break;
	case BCM2835_I2C_S:
	if (writeval & BCM2835_I2C_S_DONE && s->s & BCM2835_I2C_S_DONE) {
	/* When DONE is cleared, DLEN should read last written value. */
	s->dlen = s->last_dlen;
	}

	/* Clear DONE, CLKT and ERR by writing 1 */
	s->s &= ~(writeval & (BCM2835_I2C_S_DONE \|
	BCM2835_I2C_S_ERR \| BCM2835_I2C_S_CLKT));
	break;
	case BCM2835_I2C_DLEN:
	s->dlen = writeval;
	s->last_dlen = writeval;
	break;
	case BCM2835_I2C_A:
	s->a = writeval;
	break;
	case BCM2835_I2C_FIFO:
	/* We send I2C messages directly instead of using FIFOs */
	if (s->s & BCM2835_I2C_S_TA) {
	if (s->s & BCM2835_I2C_S_TXD) {
	if (!i2c_send(s->bus, writeval & 0xff)) {
	s->dlen -= 1;
	} else {
	s->s \|= BCM2835_I2C_S_ERR;
	}
	}

	if (s->dlen == 0) {
	bcm2835_i2c_finish_transfer(s);
	}
	}
	bcm2835_i2c_update_interrupt(s);
	break;
	case BCM2835_I2C_DIV:
	s->div = writeval;
	break;
	case BCM2835_I2C_DEL:
	s->del = writeval;
	break;
	case BCM2835_I2C_CLKT:
	s->clkt = writeval;
	break;
	default:
	qemu_log_mask(LOG_GUEST_ERROR,
	"%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, addr);
	}
	}

	static const MemoryRegionOps bcm2835_i2c_ops = {
	.read = bcm2835_i2c_read,
	.write = bcm2835_i2c_write,
	.endianness = DEVICE_NATIVE_ENDIAN,
	.valid = {
	.min_access_size = 4,
	.max_access_size = 4,
	},
	};

	static void bcm2835_i2c_realize(DeviceState dev, Error *errp)
	{
	BCM2835I2CState *s = BCM2835_I2C(dev);
	s->bus = i2c_init_bus(dev, NULL);

	memory_region_init_io(&s->iomem, OBJECT(dev), &bcm2835_i2c_ops, s,
	TYPE_BCM2835_I2C, 0x24);
	sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->iomem);
	sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq);
	}

	static void bcm2835_i2c_reset(DeviceState *dev)
	{
	BCM2835I2CState *s = BCM2835_I2C(dev);

	/* Reset values according to BCM2835 Peripheral Documentation */
	s->c = 0x0;
	s->s = BCM2835_I2C_S_TXD \| BCM2835_I2C_S_TXE;
	s->dlen = 0x0;
	s->a = 0x0;
	s->div = 0x5dc;
	s->del = 0x00300030;
	s->clkt = 0x40;
	}

	static const VMStateDescription vmstate_bcm2835_i2c = {
	.name = TYPE_BCM2835_I2C,
	.version_id = 1,
	.minimum_version_id = 1,
	.fields = (const VMStateField[]) {
	VMSTATE_UINT32(c, BCM2835I2CState),
	VMSTATE_UINT32(s, BCM2835I2CState),
	VMSTATE_UINT32(dlen, BCM2835I2CState),
	VMSTATE_UINT32(a, BCM2835I2CState),
	VMSTATE_UINT32(div, BCM2835I2CState),
	VMSTATE_UINT32(del, BCM2835I2CState),
	VMSTATE_UINT32(clkt, BCM2835I2CState),
	VMSTATE_UINT32(last_dlen, BCM2835I2CState),
	VMSTATE_END_OF_LIST()
	}
	};

	static void bcm2835_i2c_class_init(ObjectClass klass, void data)
	{
	DeviceClass *dc = DEVICE_CLASS(klass);

	device_class_set_legacy_reset(dc, bcm2835_i2c_reset);
	dc->realize = bcm2835_i2c_realize;
	dc->vmsd = &vmstate_bcm2835_i2c;
	}

	static const TypeInfo bcm2835_i2c_info = {
	.name = TYPE_BCM2835_I2C,
	.parent = TYPE_SYS_BUS_DEVICE,
	.instance_size = sizeof(BCM2835I2CState),
	.class_init = bcm2835_i2c_class_init,
	};

	static void bcm2835_i2c_register_types(void)
	{
	type_register_static(&bcm2835_i2c_info);
	}

	type_init(bcm2835_i2c_register_types)