| /* |
| * QTests for Nuvoton NPCM7xx EMC Modules. |
| * |
| * Copyright 2020 Google LLC |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * for more details. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qemu-common.h" |
| #include "libqos/libqos.h" |
| #include "qapi/qmp/qdict.h" |
| #include "qapi/qmp/qnum.h" |
| #include "qemu/bitops.h" |
| #include "qemu/iov.h" |
| |
| /* Name of the emc device. */ |
| #define TYPE_NPCM7XX_EMC "npcm7xx-emc" |
| |
| /* Timeout for various operations, in seconds. */ |
| #define TIMEOUT_SECONDS 10 |
| |
| /* Address in memory of the descriptor. */ |
| #define DESC_ADDR (1 << 20) /* 1 MiB */ |
| |
| /* Address in memory of the data packet. */ |
| #define DATA_ADDR (DESC_ADDR + 4096) |
| |
| #define CRC_LENGTH 4 |
| |
| #define NUM_TX_DESCRIPTORS 3 |
| #define NUM_RX_DESCRIPTORS 2 |
| |
| /* Size of tx,rx test buffers. */ |
| #define TX_DATA_LEN 64 |
| #define RX_DATA_LEN 64 |
| |
| #define TX_STEP_COUNT 10000 |
| #define RX_STEP_COUNT 10000 |
| |
| /* 32-bit register indices. */ |
| typedef enum NPCM7xxPWMRegister { |
| /* Control registers. */ |
| REG_CAMCMR, |
| REG_CAMEN, |
| |
| /* There are 16 CAMn[ML] registers. */ |
| REG_CAMM_BASE, |
| REG_CAML_BASE, |
| |
| REG_TXDLSA = 0x22, |
| REG_RXDLSA, |
| REG_MCMDR, |
| REG_MIID, |
| REG_MIIDA, |
| REG_FFTCR, |
| REG_TSDR, |
| REG_RSDR, |
| REG_DMARFC, |
| REG_MIEN, |
| |
| /* Status registers. */ |
| REG_MISTA, |
| REG_MGSTA, |
| REG_MPCNT, |
| REG_MRPC, |
| REG_MRPCC, |
| REG_MREPC, |
| REG_DMARFS, |
| REG_CTXDSA, |
| REG_CTXBSA, |
| REG_CRXDSA, |
| REG_CRXBSA, |
| |
| NPCM7XX_NUM_EMC_REGS, |
| } NPCM7xxPWMRegister; |
| |
| enum { NUM_CAMML_REGS = 16 }; |
| |
| /* REG_CAMCMR fields */ |
| /* Enable CAM Compare */ |
| #define REG_CAMCMR_ECMP (1 << 4) |
| /* Accept Unicast Packet */ |
| #define REG_CAMCMR_AUP (1 << 0) |
| |
| /* REG_MCMDR fields */ |
| /* Software Reset */ |
| #define REG_MCMDR_SWR (1 << 24) |
| /* Frame Transmission On */ |
| #define REG_MCMDR_TXON (1 << 8) |
| /* Accept Long Packet */ |
| #define REG_MCMDR_ALP (1 << 1) |
| /* Frame Reception On */ |
| #define REG_MCMDR_RXON (1 << 0) |
| |
| /* REG_MIEN fields */ |
| /* Enable Transmit Completion Interrupt */ |
| #define REG_MIEN_ENTXCP (1 << 18) |
| /* Enable Transmit Interrupt */ |
| #define REG_MIEN_ENTXINTR (1 << 16) |
| /* Enable Receive Good Interrupt */ |
| #define REG_MIEN_ENRXGD (1 << 4) |
| /* ENable Receive Interrupt */ |
| #define REG_MIEN_ENRXINTR (1 << 0) |
| |
| /* REG_MISTA fields */ |
| /* Transmit Bus Error Interrupt */ |
| #define REG_MISTA_TXBERR (1 << 24) |
| /* Transmit Descriptor Unavailable Interrupt */ |
| #define REG_MISTA_TDU (1 << 23) |
| /* Transmit Completion Interrupt */ |
| #define REG_MISTA_TXCP (1 << 18) |
| /* Transmit Interrupt */ |
| #define REG_MISTA_TXINTR (1 << 16) |
| /* Receive Bus Error Interrupt */ |
| #define REG_MISTA_RXBERR (1 << 11) |
| /* Receive Descriptor Unavailable Interrupt */ |
| #define REG_MISTA_RDU (1 << 10) |
| /* DMA Early Notification Interrupt */ |
| #define REG_MISTA_DENI (1 << 9) |
| /* Maximum Frame Length Interrupt */ |
| #define REG_MISTA_DFOI (1 << 8) |
| /* Receive Good Interrupt */ |
| #define REG_MISTA_RXGD (1 << 4) |
| /* Packet Too Long Interrupt */ |
| #define REG_MISTA_PTLE (1 << 3) |
| /* Receive Interrupt */ |
| #define REG_MISTA_RXINTR (1 << 0) |
| |
| typedef struct NPCM7xxEMCTxDesc NPCM7xxEMCTxDesc; |
| typedef struct NPCM7xxEMCRxDesc NPCM7xxEMCRxDesc; |
| |
| struct NPCM7xxEMCTxDesc { |
| uint32_t flags; |
| uint32_t txbsa; |
| uint32_t status_and_length; |
| uint32_t ntxdsa; |
| }; |
| |
| struct NPCM7xxEMCRxDesc { |
| uint32_t status_and_length; |
| uint32_t rxbsa; |
| uint32_t reserved; |
| uint32_t nrxdsa; |
| }; |
| |
| /* NPCM7xxEMCTxDesc.flags values */ |
| /* Owner: 0 = cpu, 1 = emc */ |
| #define TX_DESC_FLAG_OWNER_MASK (1 << 31) |
| /* Transmit interrupt enable */ |
| #define TX_DESC_FLAG_INTEN (1 << 2) |
| |
| /* NPCM7xxEMCTxDesc.status_and_length values */ |
| /* Transmission complete */ |
| #define TX_DESC_STATUS_TXCP (1 << 19) |
| /* Transmit interrupt */ |
| #define TX_DESC_STATUS_TXINTR (1 << 16) |
| |
| /* NPCM7xxEMCRxDesc.status_and_length values */ |
| /* Owner: 0b00 = cpu, 0b10 = emc */ |
| #define RX_DESC_STATUS_OWNER_SHIFT 30 |
| #define RX_DESC_STATUS_OWNER_MASK 0xc0000000 |
| /* Frame Reception Complete */ |
| #define RX_DESC_STATUS_RXGD (1 << 20) |
| /* Packet too long */ |
| #define RX_DESC_STATUS_PTLE (1 << 19) |
| /* Receive Interrupt */ |
| #define RX_DESC_STATUS_RXINTR (1 << 16) |
| |
| #define RX_DESC_PKT_LEN(word) ((uint32_t) (word) & 0xffff) |
| |
| typedef struct EMCModule { |
| int rx_irq; |
| int tx_irq; |
| uint64_t base_addr; |
| } EMCModule; |
| |
| typedef struct TestData { |
| const EMCModule *module; |
| } TestData; |
| |
| static const EMCModule emc_module_list[] = { |
| { |
| .rx_irq = 15, |
| .tx_irq = 16, |
| .base_addr = 0xf0825000 |
| }, |
| { |
| .rx_irq = 114, |
| .tx_irq = 115, |
| .base_addr = 0xf0826000 |
| } |
| }; |
| |
| /* Returns the index of the EMC module. */ |
| static int emc_module_index(const EMCModule *mod) |
| { |
| ptrdiff_t diff = mod - emc_module_list; |
| |
| g_assert_true(diff >= 0 && diff < ARRAY_SIZE(emc_module_list)); |
| |
| return diff; |
| } |
| |
| static void packet_test_clear(void *sockets) |
| { |
| int *test_sockets = sockets; |
| |
| close(test_sockets[0]); |
| g_free(test_sockets); |
| } |
| |
| static int *packet_test_init(int module_num, GString *cmd_line) |
| { |
| int *test_sockets = g_new(int, 2); |
| int ret = socketpair(PF_UNIX, SOCK_STREAM, 0, test_sockets); |
| g_assert_cmpint(ret, != , -1); |
| |
| /* |
| * KISS and use -nic. We specify two nics (both emc{0,1}) because there's |
| * currently no way to specify only emc1: The driver implicitly relies on |
| * emc[i] == nd_table[i]. |
| */ |
| if (module_num == 0) { |
| g_string_append_printf(cmd_line, |
| " -nic socket,fd=%d,model=" TYPE_NPCM7XX_EMC " " |
| " -nic user,model=" TYPE_NPCM7XX_EMC " ", |
| test_sockets[1]); |
| } else { |
| g_string_append_printf(cmd_line, |
| " -nic user,model=" TYPE_NPCM7XX_EMC " " |
| " -nic socket,fd=%d,model=" TYPE_NPCM7XX_EMC " ", |
| test_sockets[1]); |
| } |
| |
| g_test_queue_destroy(packet_test_clear, test_sockets); |
| return test_sockets; |
| } |
| |
| static uint32_t emc_read(QTestState *qts, const EMCModule *mod, |
| NPCM7xxPWMRegister regno) |
| { |
| return qtest_readl(qts, mod->base_addr + regno * sizeof(uint32_t)); |
| } |
| |
| static void emc_write(QTestState *qts, const EMCModule *mod, |
| NPCM7xxPWMRegister regno, uint32_t value) |
| { |
| qtest_writel(qts, mod->base_addr + regno * sizeof(uint32_t), value); |
| } |
| |
| static void emc_read_tx_desc(QTestState *qts, uint32_t addr, |
| NPCM7xxEMCTxDesc *desc) |
| { |
| qtest_memread(qts, addr, desc, sizeof(*desc)); |
| desc->flags = le32_to_cpu(desc->flags); |
| desc->txbsa = le32_to_cpu(desc->txbsa); |
| desc->status_and_length = le32_to_cpu(desc->status_and_length); |
| desc->ntxdsa = le32_to_cpu(desc->ntxdsa); |
| } |
| |
| static void emc_write_tx_desc(QTestState *qts, const NPCM7xxEMCTxDesc *desc, |
| uint32_t addr) |
| { |
| NPCM7xxEMCTxDesc le_desc; |
| |
| le_desc.flags = cpu_to_le32(desc->flags); |
| le_desc.txbsa = cpu_to_le32(desc->txbsa); |
| le_desc.status_and_length = cpu_to_le32(desc->status_and_length); |
| le_desc.ntxdsa = cpu_to_le32(desc->ntxdsa); |
| qtest_memwrite(qts, addr, &le_desc, sizeof(le_desc)); |
| } |
| |
| static void emc_read_rx_desc(QTestState *qts, uint32_t addr, |
| NPCM7xxEMCRxDesc *desc) |
| { |
| qtest_memread(qts, addr, desc, sizeof(*desc)); |
| desc->status_and_length = le32_to_cpu(desc->status_and_length); |
| desc->rxbsa = le32_to_cpu(desc->rxbsa); |
| desc->reserved = le32_to_cpu(desc->reserved); |
| desc->nrxdsa = le32_to_cpu(desc->nrxdsa); |
| } |
| |
| static void emc_write_rx_desc(QTestState *qts, const NPCM7xxEMCRxDesc *desc, |
| uint32_t addr) |
| { |
| NPCM7xxEMCRxDesc le_desc; |
| |
| le_desc.status_and_length = cpu_to_le32(desc->status_and_length); |
| le_desc.rxbsa = cpu_to_le32(desc->rxbsa); |
| le_desc.reserved = cpu_to_le32(desc->reserved); |
| le_desc.nrxdsa = cpu_to_le32(desc->nrxdsa); |
| qtest_memwrite(qts, addr, &le_desc, sizeof(le_desc)); |
| } |
| |
| /* |
| * Reset the EMC module. |
| * The module must be reset before, e.g., TXDLSA,RXDLSA are changed. |
| */ |
| static bool emc_soft_reset(QTestState *qts, const EMCModule *mod) |
| { |
| uint32_t val; |
| uint64_t end_time; |
| |
| emc_write(qts, mod, REG_MCMDR, REG_MCMDR_SWR); |
| |
| /* |
| * Wait for device to reset as the linux driver does. |
| * During reset the AHB reads 0 for all registers. So first wait for |
| * something that resets to non-zero, and then wait for SWR becoming 0. |
| */ |
| end_time = g_get_monotonic_time() + TIMEOUT_SECONDS * G_TIME_SPAN_SECOND; |
| |
| do { |
| qtest_clock_step(qts, 100); |
| val = emc_read(qts, mod, REG_FFTCR); |
| } while (val == 0 && g_get_monotonic_time() < end_time); |
| if (val != 0) { |
| do { |
| qtest_clock_step(qts, 100); |
| val = emc_read(qts, mod, REG_MCMDR); |
| if ((val & REG_MCMDR_SWR) == 0) { |
| /* |
| * N.B. The CAMs have been reset here, so macaddr matching of |
| * incoming packets will not work. |
| */ |
| return true; |
| } |
| } while (g_get_monotonic_time() < end_time); |
| } |
| |
| g_message("%s: Timeout expired", __func__); |
| return false; |
| } |
| |
| /* Check emc registers are reset to default value. */ |
| static void test_init(gconstpointer test_data) |
| { |
| const TestData *td = test_data; |
| const EMCModule *mod = td->module; |
| QTestState *qts = qtest_init("-machine quanta-gsj"); |
| int i; |
| |
| #define CHECK_REG(regno, value) \ |
| do { \ |
| g_assert_cmphex(emc_read(qts, mod, (regno)), ==, (value)); \ |
| } while (0) |
| |
| CHECK_REG(REG_CAMCMR, 0); |
| CHECK_REG(REG_CAMEN, 0); |
| CHECK_REG(REG_TXDLSA, 0xfffffffc); |
| CHECK_REG(REG_RXDLSA, 0xfffffffc); |
| CHECK_REG(REG_MCMDR, 0); |
| CHECK_REG(REG_MIID, 0); |
| CHECK_REG(REG_MIIDA, 0x00900000); |
| CHECK_REG(REG_FFTCR, 0x0101); |
| CHECK_REG(REG_DMARFC, 0x0800); |
| CHECK_REG(REG_MIEN, 0); |
| CHECK_REG(REG_MISTA, 0); |
| CHECK_REG(REG_MGSTA, 0); |
| CHECK_REG(REG_MPCNT, 0x7fff); |
| CHECK_REG(REG_MRPC, 0); |
| CHECK_REG(REG_MRPCC, 0); |
| CHECK_REG(REG_MREPC, 0); |
| CHECK_REG(REG_DMARFS, 0); |
| CHECK_REG(REG_CTXDSA, 0); |
| CHECK_REG(REG_CTXBSA, 0); |
| CHECK_REG(REG_CRXDSA, 0); |
| CHECK_REG(REG_CRXBSA, 0); |
| |
| #undef CHECK_REG |
| |
| for (i = 0; i < NUM_CAMML_REGS; ++i) { |
| g_assert_cmpuint(emc_read(qts, mod, REG_CAMM_BASE + i * 2), ==, |
| 0); |
| g_assert_cmpuint(emc_read(qts, mod, REG_CAML_BASE + i * 2), ==, |
| 0); |
| } |
| |
| qtest_quit(qts); |
| } |
| |
| static bool emc_wait_irq(QTestState *qts, const EMCModule *mod, int step, |
| bool is_tx) |
| { |
| uint64_t end_time = |
| g_get_monotonic_time() + TIMEOUT_SECONDS * G_TIME_SPAN_SECOND; |
| |
| do { |
| if (qtest_get_irq(qts, is_tx ? mod->tx_irq : mod->rx_irq)) { |
| return true; |
| } |
| qtest_clock_step(qts, step); |
| } while (g_get_monotonic_time() < end_time); |
| |
| g_message("%s: Timeout expired", __func__); |
| return false; |
| } |
| |
| static bool emc_wait_mista(QTestState *qts, const EMCModule *mod, int step, |
| uint32_t flag) |
| { |
| uint64_t end_time = |
| g_get_monotonic_time() + TIMEOUT_SECONDS * G_TIME_SPAN_SECOND; |
| |
| do { |
| uint32_t mista = emc_read(qts, mod, REG_MISTA); |
| if (mista & flag) { |
| return true; |
| } |
| qtest_clock_step(qts, step); |
| } while (g_get_monotonic_time() < end_time); |
| |
| g_message("%s: Timeout expired", __func__); |
| return false; |
| } |
| |
| static bool wait_socket_readable(int fd) |
| { |
| fd_set read_fds; |
| struct timeval tv; |
| int rv; |
| |
| FD_ZERO(&read_fds); |
| FD_SET(fd, &read_fds); |
| tv.tv_sec = TIMEOUT_SECONDS; |
| tv.tv_usec = 0; |
| rv = select(fd + 1, &read_fds, NULL, NULL, &tv); |
| if (rv == -1) { |
| perror("select"); |
| } else if (rv == 0) { |
| g_message("%s: Timeout expired", __func__); |
| } |
| return rv == 1; |
| } |
| |
| /* Initialize *desc (in host endian format). */ |
| static void init_tx_desc(NPCM7xxEMCTxDesc *desc, size_t count, |
| uint32_t desc_addr) |
| { |
| g_assert(count >= 2); |
| memset(&desc[0], 0, sizeof(*desc) * count); |
| /* Leave the last one alone, owned by the cpu -> stops transmission. */ |
| for (size_t i = 0; i < count - 1; ++i) { |
| desc[i].flags = |
| (TX_DESC_FLAG_OWNER_MASK | /* owner = 1: emc */ |
| TX_DESC_FLAG_INTEN | |
| 0 | /* crc append = 0 */ |
| 0 /* padding enable = 0 */); |
| desc[i].status_and_length = |
| (0 | /* collision count = 0 */ |
| 0 | /* SQE = 0 */ |
| 0 | /* PAU = 0 */ |
| 0 | /* TXHA = 0 */ |
| 0 | /* LC = 0 */ |
| 0 | /* TXABT = 0 */ |
| 0 | /* NCS = 0 */ |
| 0 | /* EXDEF = 0 */ |
| 0 | /* TXCP = 0 */ |
| 0 | /* DEF = 0 */ |
| 0 | /* TXINTR = 0 */ |
| 0 /* length filled in later */); |
| desc[i].ntxdsa = desc_addr + (i + 1) * sizeof(*desc); |
| } |
| } |
| |
| static void enable_tx(QTestState *qts, const EMCModule *mod, |
| const NPCM7xxEMCTxDesc *desc, size_t count, |
| uint32_t desc_addr, uint32_t mien_flags) |
| { |
| /* Write the descriptors to guest memory. */ |
| for (size_t i = 0; i < count; ++i) { |
| emc_write_tx_desc(qts, desc + i, desc_addr + i * sizeof(*desc)); |
| } |
| |
| /* Trigger sending the packet. */ |
| /* The module must be reset before changing TXDLSA. */ |
| g_assert(emc_soft_reset(qts, mod)); |
| emc_write(qts, mod, REG_TXDLSA, desc_addr); |
| emc_write(qts, mod, REG_CTXDSA, ~0); |
| emc_write(qts, mod, REG_MIEN, REG_MIEN_ENTXCP | mien_flags); |
| { |
| uint32_t mcmdr = emc_read(qts, mod, REG_MCMDR); |
| mcmdr |= REG_MCMDR_TXON; |
| emc_write(qts, mod, REG_MCMDR, mcmdr); |
| } |
| } |
| |
| static void emc_send_verify1(QTestState *qts, const EMCModule *mod, int fd, |
| bool with_irq, uint32_t desc_addr, |
| uint32_t next_desc_addr, |
| const char *test_data, int test_size) |
| { |
| NPCM7xxEMCTxDesc result_desc; |
| uint32_t expected_mask, expected_value, recv_len; |
| int ret; |
| char buffer[TX_DATA_LEN]; |
| |
| g_assert(wait_socket_readable(fd)); |
| |
| /* Read the descriptor back. */ |
| emc_read_tx_desc(qts, desc_addr, &result_desc); |
| /* Descriptor should be owned by cpu now. */ |
| g_assert((result_desc.flags & TX_DESC_FLAG_OWNER_MASK) == 0); |
| /* Test the status bits, ignoring the length field. */ |
| expected_mask = 0xffff << 16; |
| expected_value = TX_DESC_STATUS_TXCP; |
| if (with_irq) { |
| expected_value |= TX_DESC_STATUS_TXINTR; |
| } |
| g_assert_cmphex((result_desc.status_and_length & expected_mask), ==, |
| expected_value); |
| |
| /* Check data sent to the backend. */ |
| recv_len = ~0; |
| ret = recv(fd, &recv_len, sizeof(recv_len), MSG_DONTWAIT); |
| g_assert_cmpint(ret, == , sizeof(recv_len)); |
| |
| g_assert(wait_socket_readable(fd)); |
| memset(buffer, 0xff, sizeof(buffer)); |
| ret = recv(fd, buffer, test_size, MSG_DONTWAIT); |
| g_assert_cmpmem(buffer, ret, test_data, test_size); |
| } |
| |
| static void emc_send_verify(QTestState *qts, const EMCModule *mod, int fd, |
| bool with_irq) |
| { |
| NPCM7xxEMCTxDesc desc[NUM_TX_DESCRIPTORS]; |
| uint32_t desc_addr = DESC_ADDR; |
| static const char test1_data[] = "TEST1"; |
| static const char test2_data[] = "Testing 1 2 3 ..."; |
| uint32_t data1_addr = DATA_ADDR; |
| uint32_t data2_addr = data1_addr + sizeof(test1_data); |
| bool got_tdu; |
| uint32_t end_desc_addr; |
| |
| /* Prepare test data buffer. */ |
| qtest_memwrite(qts, data1_addr, test1_data, sizeof(test1_data)); |
| qtest_memwrite(qts, data2_addr, test2_data, sizeof(test2_data)); |
| |
| init_tx_desc(&desc[0], NUM_TX_DESCRIPTORS, desc_addr); |
| desc[0].txbsa = data1_addr; |
| desc[0].status_and_length |= sizeof(test1_data); |
| desc[1].txbsa = data2_addr; |
| desc[1].status_and_length |= sizeof(test2_data); |
| |
| enable_tx(qts, mod, &desc[0], NUM_TX_DESCRIPTORS, desc_addr, |
| with_irq ? REG_MIEN_ENTXINTR : 0); |
| |
| /* Prod the device to send the packet. */ |
| emc_write(qts, mod, REG_TSDR, 1); |
| |
| /* |
| * It's problematic to observe the interrupt for each packet. |
| * Instead just wait until all the packets go out. |
| */ |
| got_tdu = false; |
| while (!got_tdu) { |
| if (with_irq) { |
| g_assert_true(emc_wait_irq(qts, mod, TX_STEP_COUNT, |
| /*is_tx=*/true)); |
| } else { |
| g_assert_true(emc_wait_mista(qts, mod, TX_STEP_COUNT, |
| REG_MISTA_TXINTR)); |
| } |
| got_tdu = !!(emc_read(qts, mod, REG_MISTA) & REG_MISTA_TDU); |
| /* If we don't have TDU yet, reset the interrupt. */ |
| if (!got_tdu) { |
| emc_write(qts, mod, REG_MISTA, |
| emc_read(qts, mod, REG_MISTA) & 0xffff0000); |
| } |
| } |
| |
| end_desc_addr = desc_addr + 2 * sizeof(desc[0]); |
| g_assert_cmphex(emc_read(qts, mod, REG_CTXDSA), ==, end_desc_addr); |
| g_assert_cmphex(emc_read(qts, mod, REG_MISTA), ==, |
| REG_MISTA_TXCP | REG_MISTA_TXINTR | REG_MISTA_TDU); |
| |
| emc_send_verify1(qts, mod, fd, with_irq, |
| desc_addr, end_desc_addr, |
| test1_data, sizeof(test1_data)); |
| emc_send_verify1(qts, mod, fd, with_irq, |
| desc_addr + sizeof(desc[0]), end_desc_addr, |
| test2_data, sizeof(test2_data)); |
| } |
| |
| /* Initialize *desc (in host endian format). */ |
| static void init_rx_desc(NPCM7xxEMCRxDesc *desc, size_t count, |
| uint32_t desc_addr, uint32_t data_addr) |
| { |
| g_assert_true(count >= 2); |
| memset(desc, 0, sizeof(*desc) * count); |
| desc[0].rxbsa = data_addr; |
| desc[0].status_and_length = |
| (0b10 << RX_DESC_STATUS_OWNER_SHIFT | /* owner = 10: emc */ |
| 0 | /* RP = 0 */ |
| 0 | /* ALIE = 0 */ |
| 0 | /* RXGD = 0 */ |
| 0 | /* PTLE = 0 */ |
| 0 | /* CRCE = 0 */ |
| 0 | /* RXINTR = 0 */ |
| 0 /* length (filled in later) */); |
| /* Leave the last one alone, owned by the cpu -> stops transmission. */ |
| desc[0].nrxdsa = desc_addr + sizeof(*desc); |
| } |
| |
| static void enable_rx(QTestState *qts, const EMCModule *mod, |
| const NPCM7xxEMCRxDesc *desc, size_t count, |
| uint32_t desc_addr, uint32_t mien_flags, |
| uint32_t mcmdr_flags) |
| { |
| /* |
| * Write the descriptor to guest memory. |
| * FWIW, IWBN if the docs said the buffer needs to be at least DMARFC |
| * bytes. |
| */ |
| for (size_t i = 0; i < count; ++i) { |
| emc_write_rx_desc(qts, desc + i, desc_addr + i * sizeof(*desc)); |
| } |
| |
| /* Trigger receiving the packet. */ |
| /* The module must be reset before changing RXDLSA. */ |
| g_assert(emc_soft_reset(qts, mod)); |
| emc_write(qts, mod, REG_RXDLSA, desc_addr); |
| emc_write(qts, mod, REG_MIEN, REG_MIEN_ENRXGD | mien_flags); |
| |
| /* |
| * We don't know what the device's macaddr is, so just accept all |
| * unicast packets (AUP). |
| */ |
| emc_write(qts, mod, REG_CAMCMR, REG_CAMCMR_AUP); |
| emc_write(qts, mod, REG_CAMEN, 1 << 0); |
| { |
| uint32_t mcmdr = emc_read(qts, mod, REG_MCMDR); |
| mcmdr |= REG_MCMDR_RXON | mcmdr_flags; |
| emc_write(qts, mod, REG_MCMDR, mcmdr); |
| } |
| } |
| |
| static void emc_recv_verify(QTestState *qts, const EMCModule *mod, int fd, |
| bool with_irq, bool pump_rsdr) |
| { |
| NPCM7xxEMCRxDesc desc[NUM_RX_DESCRIPTORS]; |
| uint32_t desc_addr = DESC_ADDR; |
| uint32_t data_addr = DATA_ADDR; |
| int ret; |
| uint32_t expected_mask, expected_value; |
| NPCM7xxEMCRxDesc result_desc; |
| |
| /* Prepare test data buffer. */ |
| const char test[RX_DATA_LEN] = "TEST"; |
| int len = htonl(sizeof(test)); |
| const struct iovec iov[] = { |
| { |
| .iov_base = &len, |
| .iov_len = sizeof(len), |
| },{ |
| .iov_base = (char *) test, |
| .iov_len = sizeof(test), |
| }, |
| }; |
| |
| /* |
| * Reset the device BEFORE sending a test packet, otherwise the packet |
| * may get swallowed by an active device of an earlier test. |
| */ |
| init_rx_desc(&desc[0], NUM_RX_DESCRIPTORS, desc_addr, data_addr); |
| enable_rx(qts, mod, &desc[0], NUM_RX_DESCRIPTORS, desc_addr, |
| with_irq ? REG_MIEN_ENRXINTR : 0, 0); |
| |
| /* |
| * If requested, prod the device to accept a packet. |
| * This isn't necessary, the linux driver doesn't do this. |
| * Test doing/not-doing this for robustness. |
| */ |
| if (pump_rsdr) { |
| emc_write(qts, mod, REG_RSDR, 1); |
| } |
| |
| /* Send test packet to device's socket. */ |
| ret = iov_send(fd, iov, 2, 0, sizeof(len) + sizeof(test)); |
| g_assert_cmpint(ret, == , sizeof(test) + sizeof(len)); |
| |
| /* Wait for RX interrupt. */ |
| if (with_irq) { |
| g_assert_true(emc_wait_irq(qts, mod, RX_STEP_COUNT, /*is_tx=*/false)); |
| } else { |
| g_assert_true(emc_wait_mista(qts, mod, RX_STEP_COUNT, REG_MISTA_RXGD)); |
| } |
| |
| g_assert_cmphex(emc_read(qts, mod, REG_CRXDSA), ==, |
| desc_addr + sizeof(desc[0])); |
| |
| expected_mask = 0xffff; |
| expected_value = (REG_MISTA_DENI | |
| REG_MISTA_RXGD | |
| REG_MISTA_RXINTR); |
| g_assert_cmphex((emc_read(qts, mod, REG_MISTA) & expected_mask), |
| ==, expected_value); |
| |
| /* Read the descriptor back. */ |
| emc_read_rx_desc(qts, desc_addr, &result_desc); |
| /* Descriptor should be owned by cpu now. */ |
| g_assert((result_desc.status_and_length & RX_DESC_STATUS_OWNER_MASK) == 0); |
| /* Test the status bits, ignoring the length field. */ |
| expected_mask = 0xffff << 16; |
| expected_value = RX_DESC_STATUS_RXGD; |
| if (with_irq) { |
| expected_value |= RX_DESC_STATUS_RXINTR; |
| } |
| g_assert_cmphex((result_desc.status_and_length & expected_mask), ==, |
| expected_value); |
| g_assert_cmpint(RX_DESC_PKT_LEN(result_desc.status_and_length), ==, |
| RX_DATA_LEN + CRC_LENGTH); |
| |
| { |
| char buffer[RX_DATA_LEN]; |
| qtest_memread(qts, data_addr, buffer, sizeof(buffer)); |
| g_assert_cmpstr(buffer, == , "TEST"); |
| } |
| } |
| |
| static void emc_test_ptle(QTestState *qts, const EMCModule *mod, int fd) |
| { |
| NPCM7xxEMCRxDesc desc[NUM_RX_DESCRIPTORS]; |
| uint32_t desc_addr = DESC_ADDR; |
| uint32_t data_addr = DATA_ADDR; |
| int ret; |
| NPCM7xxEMCRxDesc result_desc; |
| uint32_t expected_mask, expected_value; |
| |
| /* Prepare test data buffer. */ |
| #define PTLE_DATA_LEN 1600 |
| char test_data[PTLE_DATA_LEN]; |
| int len = htonl(sizeof(test_data)); |
| const struct iovec iov[] = { |
| { |
| .iov_base = &len, |
| .iov_len = sizeof(len), |
| },{ |
| .iov_base = (char *) test_data, |
| .iov_len = sizeof(test_data), |
| }, |
| }; |
| memset(test_data, 42, sizeof(test_data)); |
| |
| /* |
| * Reset the device BEFORE sending a test packet, otherwise the packet |
| * may get swallowed by an active device of an earlier test. |
| */ |
| init_rx_desc(&desc[0], NUM_RX_DESCRIPTORS, desc_addr, data_addr); |
| enable_rx(qts, mod, &desc[0], NUM_RX_DESCRIPTORS, desc_addr, |
| REG_MIEN_ENRXINTR, REG_MCMDR_ALP); |
| |
| /* Send test packet to device's socket. */ |
| ret = iov_send(fd, iov, 2, 0, sizeof(len) + sizeof(test_data)); |
| g_assert_cmpint(ret, == , sizeof(test_data) + sizeof(len)); |
| |
| /* Wait for RX interrupt. */ |
| g_assert_true(emc_wait_irq(qts, mod, RX_STEP_COUNT, /*is_tx=*/false)); |
| |
| /* Read the descriptor back. */ |
| emc_read_rx_desc(qts, desc_addr, &result_desc); |
| /* Descriptor should be owned by cpu now. */ |
| g_assert((result_desc.status_and_length & RX_DESC_STATUS_OWNER_MASK) == 0); |
| /* Test the status bits, ignoring the length field. */ |
| expected_mask = 0xffff << 16; |
| expected_value = (RX_DESC_STATUS_RXGD | |
| RX_DESC_STATUS_PTLE | |
| RX_DESC_STATUS_RXINTR); |
| g_assert_cmphex((result_desc.status_and_length & expected_mask), ==, |
| expected_value); |
| g_assert_cmpint(RX_DESC_PKT_LEN(result_desc.status_and_length), ==, |
| PTLE_DATA_LEN + CRC_LENGTH); |
| |
| { |
| char buffer[PTLE_DATA_LEN]; |
| qtest_memread(qts, data_addr, buffer, sizeof(buffer)); |
| g_assert(memcmp(buffer, test_data, PTLE_DATA_LEN) == 0); |
| } |
| } |
| |
| static void test_tx(gconstpointer test_data) |
| { |
| const TestData *td = test_data; |
| GString *cmd_line = g_string_new("-machine quanta-gsj"); |
| int *test_sockets = packet_test_init(emc_module_index(td->module), |
| cmd_line); |
| QTestState *qts = qtest_init(cmd_line->str); |
| |
| /* |
| * TODO: For pedantic correctness test_sockets[0] should be closed after |
| * the fork and before the exec, but that will require some harness |
| * improvements. |
| */ |
| close(test_sockets[1]); |
| /* Defensive programming */ |
| test_sockets[1] = -1; |
| |
| qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic"); |
| |
| emc_send_verify(qts, td->module, test_sockets[0], /*with_irq=*/false); |
| emc_send_verify(qts, td->module, test_sockets[0], /*with_irq=*/true); |
| |
| qtest_quit(qts); |
| } |
| |
| static void test_rx(gconstpointer test_data) |
| { |
| const TestData *td = test_data; |
| GString *cmd_line = g_string_new("-machine quanta-gsj"); |
| int *test_sockets = packet_test_init(emc_module_index(td->module), |
| cmd_line); |
| QTestState *qts = qtest_init(cmd_line->str); |
| |
| /* |
| * TODO: For pedantic correctness test_sockets[0] should be closed after |
| * the fork and before the exec, but that will require some harness |
| * improvements. |
| */ |
| close(test_sockets[1]); |
| /* Defensive programming */ |
| test_sockets[1] = -1; |
| |
| qtest_irq_intercept_in(qts, "/machine/soc/a9mpcore/gic"); |
| |
| emc_recv_verify(qts, td->module, test_sockets[0], /*with_irq=*/false, |
| /*pump_rsdr=*/false); |
| emc_recv_verify(qts, td->module, test_sockets[0], /*with_irq=*/false, |
| /*pump_rsdr=*/true); |
| emc_recv_verify(qts, td->module, test_sockets[0], /*with_irq=*/true, |
| /*pump_rsdr=*/false); |
| emc_recv_verify(qts, td->module, test_sockets[0], /*with_irq=*/true, |
| /*pump_rsdr=*/true); |
| emc_test_ptle(qts, td->module, test_sockets[0]); |
| |
| qtest_quit(qts); |
| } |
| |
| static void emc_add_test(const char *name, const TestData* td, |
| GTestDataFunc fn) |
| { |
| g_autofree char *full_name = g_strdup_printf( |
| "npcm7xx_emc/emc[%d]/%s", emc_module_index(td->module), name); |
| qtest_add_data_func(full_name, td, fn); |
| } |
| #define add_test(name, td) emc_add_test(#name, td, test_##name) |
| |
| int main(int argc, char **argv) |
| { |
| TestData test_data_list[ARRAY_SIZE(emc_module_list)]; |
| |
| g_test_init(&argc, &argv, NULL); |
| |
| for (int i = 0; i < ARRAY_SIZE(emc_module_list); ++i) { |
| TestData *td = &test_data_list[i]; |
| |
| td->module = &emc_module_list[i]; |
| |
| add_test(init, td); |
| add_test(tx, td); |
| add_test(rx, td); |
| } |
| |
| return g_test_run(); |
| } |