Makefile - qemu - Git at Google

 include config.mak

 CFLAGS=-Wall -O2 -g
 LDFLAGS=-g
 LIBS=
 DEFINES=-DHAVE_BYTESWAP_H
 HELPER_CFLAGS=$(CFLAGS)

 ifeq ($(ARCH),i386)
 CFLAGS+=-fomit-frame-pointer
 OP_CFLAGS=$(CFLAGS) -mpreferred-stack-boundary=2
 ifeq ($(GCC_MAJOR),3)
 OP_CFLAGS+= -falign-functions=0
 else
 OP_CFLAGS+= -malign-functions=0
 endif
 ifdef TARGET_GPROF
 LDFLAGS+=-Wl,-T,i386.ld
 else
 # WARNING: this LDFLAGS is _very_ tricky : qemu is an ELF shared object
 # that the kernel ELF loader considers as an executable. I think this
 # is the simplest way to make it self virtualizable!
 LDFLAGS+=-Wl,-shared
 endif
 endif

 ifeq ($(ARCH),ppc)
 OP_CFLAGS=$(CFLAGS)
 LDFLAGS+=-Wl,-T,ppc.ld
 endif

 ifeq ($(ARCH),s390)
 OP_CFLAGS=$(CFLAGS)
 LDFLAGS+=-Wl,-T,s390.ld
 endif

 ifeq ($(ARCH),sparc)
 CFLAGS+=-m32 -ffixed-g1 -ffixed-g2 -ffixed-g3 -ffixed-g6
 LDFLAGS+=-m32
 OP_CFLAGS=$(CFLAGS) -fno-delayed-branch -ffixed-i0
 HELPER_CFLAGS=$(CFLAGS) -ffixed-i0 -mflat
 LDFLAGS+=-Wl,-T,sparc.ld
 endif

 ifeq ($(ARCH),sparc64)
 CFLAGS+=-m64 -ffixed-g1 -ffixed-g2 -ffixed-g3 -ffixed-g6
 LDFLAGS+=-m64
 OP_CFLAGS=$(CFLAGS) -fno-delayed-branch -ffixed-i0
 endif

 ifeq ($(ARCH),alpha)
 # -msmall-data is not used because we want two-instruction relocations
 # for the constant constructions
 OP_CFLAGS=-Wall -O2 -g
 # Ensure there's only a single GP
 CFLAGS += -msmall-data
 LDFLAGS+=-Wl,-T,alpha.ld
 endif

 ifeq ($(ARCH),ia64)
 OP_CFLAGS=$(CFLAGS)
 endif

 ifeq ($(ARCH),arm)
 OP_CFLAGS=$(CFLAGS) -mno-sched-prolog
 LDFLAGS+=-Wl,-T,arm.ld
 endif

 ifeq ($(GCC_MAJOR),3)
 # very important to generate a return at the end of every operation
 OP_CFLAGS+=-fno-reorder-blocks -fno-optimize-sibling-calls
 endif

 #########################################################

 DEFINES+=-D_GNU_SOURCE
 LIBS+=-lm

 # profiling code
 ifdef TARGET_GPROF
 LDFLAGS+=-p
 main.o: CFLAGS+=-p
 endif

 OBJS= elfload.o main.o syscall.o mmap.o signal.o vm86.o path.o
 SRCS:= $(OBJS:.o=.c)
 OBJS+= libqemu.a

 LIBOBJS+=thunk.o translate-i386.o op-i386.o helper-i386.o exec-i386.o exec.o

 # NOTE: the disassembler code is only needed for debugging
 LIBOBJS+=disas.o i386-dis.o
 ifeq ($(ARCH),alpha)
 LIBOBJS+=alpha-dis.o
 endif
 ifeq ($(ARCH),ppc)
 LIBOBJS+=ppc-dis.o
 endif
 ifeq ($(ARCH),sparc)
 LIBOBJS+=sparc-dis.o
 endif
 ifeq ($(ARCH),arm)
 LIBOBJS+=arm-dis.o
 endif

 ifeq ($(ARCH),ia64)
 OBJS += ia64-syscall.o
 endif

 all: qemu qemu-doc.html

 qemu: $(OBJS)
 	$(CC) $(LDFLAGS) -o $@ $^  $(LIBS)
 ifeq ($(ARCH),alpha)
 # Mark as 32 bit binary, i. e. it will be mapped into the low 31 bit of
 # the address space (31 bit so sign extending doesn't matter)
 	echo -ne '\001\000\000\000' | dd of=qemu bs=1 seek=48 count=4 conv=notrunc
 endif

 depend: $(SRCS)
 	$(CC) -MM $(CFLAGS) $^ 1>.depend

 # libqemu

 libqemu.a: $(LIBOBJS)
 	rm -f $@
 	$(AR) rcs $@ $(LIBOBJS)

 dyngen: dyngen.c
 	$(HOST_CC) -O2 -Wall -g $< -o $@

 translate-i386.o: translate-i386.c op-i386.h opc-i386.h cpu-i386.h

 op-i386.h: op-i386.o dyngen
 	./dyngen -o $@ $<

 opc-i386.h: op-i386.o dyngen
 	./dyngen -c -o $@ $<

 op-i386.o: op-i386.c opreg_template.h ops_template.h
 	$(CC) $(OP_CFLAGS) $(DEFINES) -c -o $@ $<

 helper-i386.o: helper-i386.c
 	$(CC) $(HELPER_CFLAGS) $(DEFINES) -c -o $@ $<

 %.o: %.c
 	$(CC) $(CFLAGS) $(DEFINES) -c -o $@ $<

 clean:
 	$(MAKE) -C tests clean
 	rm -f *.o  *.a *~ qemu dyngen TAGS

 distclean: clean
 	rm -f config.mak config.h

 install: qemu
 	install -m 755 -s qemu $(prefix)/bin

 # various test targets
 test speed: qemu
 	make -C tests $@

 TAGS:
 	etags *.[ch] tests/*.[ch]

 # documentation
 qemu-doc.html: qemu-doc.texi
 	texi2html -monolithic -number $<

 FILES= \
 README README.distrib COPYING COPYING.LIB TODO Changelog VERSION \
 dyngen.c dyngen.h ioctls.h ops_template.h op_string.h  syscall_types.h\
 Makefile     elf.h       thunk.c\
 elfload.c   main.c            signal.c        thunk.h exec.h\
 cpu-i386.h qemu.h op-i386.c helper-i386.c syscall-i386.h  translate-i386.c\
 syscall.c opreg_template.h  syscall_defs.h vm86.c\
 dis-asm.h disas.c disas.h alpha-dis.c ppc-dis.c i386-dis.c sparc-dis.c arm-dis.c\
 ppc.ld alpha.ld s390.ld sparc.ld arm.ld exec-i386.h exec-i386.c path.c exec.c mmap.c configure \
 tests/Makefile\
 tests/test-i386.c tests/test-i386-shift.h tests/test-i386.h\
 tests/test-i386-muldiv.h tests/test-i386-code16.S\
 tests/hello.c tests/hello tests/sha1.c \
 tests/testsig.c tests/testclone.c tests/testthread.c \
 tests/runcom.c tests/pi_10.com \
 tests/test_path.c \
 qemu-doc.texi qemu-doc.html

 FILE=qemu-$(VERSION)

 tar:
 	rm -rf /tmp/$(FILE)
 	mkdir -p /tmp/$(FILE)
 	cp -P $(FILES) /tmp/$(FILE)
 	( cd /tmp ; tar zcvf ~/$(FILE).tar.gz $(FILE) )
 	rm -rf /tmp/$(FILE)

 # generate a binary distribution including the test binary environnment
 BINPATH=/usr/local/qemu-i386

 tarbin:
 	tar zcvf /tmp/qemu-$(VERSION)-i386-glibc21.tar.gz \
                  $(BINPATH)/etc $(BINPATH)/lib $(BINPATH)/bin $(BINPATH)/usr
 	tar zcvf /tmp/qemu-$(VERSION)-i386-wine.tar.gz \
                  $(BINPATH)/wine

 ifneq ($(wildcard .depend),)
 include .depend
 endif
	include config.mak

	CFLAGS=-Wall -O2 -g
	LDFLAGS=-g
	LIBS=
	DEFINES=-DHAVE_BYTESWAP_H
	HELPER_CFLAGS=$(CFLAGS)

	ifeq ($(ARCH),i386)
	CFLAGS+=-fomit-frame-pointer
	OP_CFLAGS=$(CFLAGS) -mpreferred-stack-boundary=2
	ifeq ($(GCC_MAJOR),3)
	OP_CFLAGS+= -falign-functions=0
	else
	OP_CFLAGS+= -malign-functions=0
	endif
	ifdef TARGET_GPROF
	LDFLAGS+=-Wl,-T,i386.ld
	else
	# WARNING: this LDFLAGS is _very_ tricky : qemu is an ELF shared object
	# that the kernel ELF loader considers as an executable. I think this
	# is the simplest way to make it self virtualizable!
	LDFLAGS+=-Wl,-shared
	endif
	endif

	ifeq ($(ARCH),ppc)
	OP_CFLAGS=$(CFLAGS)
	LDFLAGS+=-Wl,-T,ppc.ld
	endif

	ifeq ($(ARCH),s390)
	OP_CFLAGS=$(CFLAGS)
	LDFLAGS+=-Wl,-T,s390.ld
	endif

	ifeq ($(ARCH),sparc)
	CFLAGS+=-m32 -ffixed-g1 -ffixed-g2 -ffixed-g3 -ffixed-g6
	LDFLAGS+=-m32
	OP_CFLAGS=$(CFLAGS) -fno-delayed-branch -ffixed-i0
	HELPER_CFLAGS=$(CFLAGS) -ffixed-i0 -mflat
	LDFLAGS+=-Wl,-T,sparc.ld
	endif

	ifeq ($(ARCH),sparc64)
	CFLAGS+=-m64 -ffixed-g1 -ffixed-g2 -ffixed-g3 -ffixed-g6
	LDFLAGS+=-m64
	OP_CFLAGS=$(CFLAGS) -fno-delayed-branch -ffixed-i0
	endif

	ifeq ($(ARCH),alpha)
	# -msmall-data is not used because we want two-instruction relocations
	# for the constant constructions
	OP_CFLAGS=-Wall -O2 -g
	# Ensure there's only a single GP
	CFLAGS += -msmall-data
	LDFLAGS+=-Wl,-T,alpha.ld
	endif

	ifeq ($(ARCH),ia64)
	OP_CFLAGS=$(CFLAGS)
	endif

	ifeq ($(ARCH),arm)
	OP_CFLAGS=$(CFLAGS) -mno-sched-prolog
	LDFLAGS+=-Wl,-T,arm.ld
	endif

	ifeq ($(GCC_MAJOR),3)
	# very important to generate a return at the end of every operation
	OP_CFLAGS+=-fno-reorder-blocks -fno-optimize-sibling-calls
	endif

	#########################################################

	DEFINES+=-D_GNU_SOURCE
	LIBS+=-lm

	# profiling code
	ifdef TARGET_GPROF
	LDFLAGS+=-p
	main.o: CFLAGS+=-p
	endif

	OBJS= elfload.o main.o syscall.o mmap.o signal.o vm86.o path.o
	SRCS:= $(OBJS:.o=.c)
	OBJS+= libqemu.a

	LIBOBJS+=thunk.o translate-i386.o op-i386.o helper-i386.o exec-i386.o exec.o

	# NOTE: the disassembler code is only needed for debugging
	LIBOBJS+=disas.o i386-dis.o
	ifeq ($(ARCH),alpha)
	LIBOBJS+=alpha-dis.o
	endif
	ifeq ($(ARCH),ppc)
	LIBOBJS+=ppc-dis.o
	endif
	ifeq ($(ARCH),sparc)
	LIBOBJS+=sparc-dis.o
	endif
	ifeq ($(ARCH),arm)
	LIBOBJS+=arm-dis.o
	endif

	ifeq ($(ARCH),ia64)
	OBJS += ia64-syscall.o
	endif

	all: qemu qemu-doc.html

	qemu: $(OBJS)
	$(CC) $(LDFLAGS) -o $@ $^ $(LIBS)
	ifeq ($(ARCH),alpha)
	# Mark as 32 bit binary, i. e. it will be mapped into the low 31 bit of
	# the address space (31 bit so sign extending doesn't matter)
	echo -ne '\001\000\000\000' \| dd of=qemu bs=1 seek=48 count=4 conv=notrunc
	endif

	depend: $(SRCS)
	$(CC) -MM $(CFLAGS) $^ 1>.depend

	# libqemu

	libqemu.a: $(LIBOBJS)
	rm -f $@
	$(AR) rcs $@ $(LIBOBJS)

	dyngen: dyngen.c
	$(HOST_CC) -O2 -Wall -g $< -o $@

	translate-i386.o: translate-i386.c op-i386.h opc-i386.h cpu-i386.h

	op-i386.h: op-i386.o dyngen
	./dyngen -o $@ $<

	opc-i386.h: op-i386.o dyngen
	./dyngen -c -o $@ $<

	op-i386.o: op-i386.c opreg_template.h ops_template.h
	$(CC) $(OP_CFLAGS) $(DEFINES) -c -o $@ $<

	helper-i386.o: helper-i386.c
	$(CC) $(HELPER_CFLAGS) $(DEFINES) -c -o $@ $<

	%.o: %.c
	$(CC) $(CFLAGS) $(DEFINES) -c -o $@ $<

	clean:
	$(MAKE) -C tests clean
	rm -f .o .a *~ qemu dyngen TAGS

	distclean: clean
	rm -f config.mak config.h

	install: qemu
	install -m 755 -s qemu $(prefix)/bin

	# various test targets
	test speed: qemu
	make -C tests $@

	TAGS:
	etags .[ch] tests/.[ch]

	# documentation
	qemu-doc.html: qemu-doc.texi
	texi2html -monolithic -number $<

	FILES= \
	README README.distrib COPYING COPYING.LIB TODO Changelog VERSION \
	dyngen.c dyngen.h ioctls.h ops_template.h op_string.h syscall_types.h\
	Makefile elf.h thunk.c\
	elfload.c main.c signal.c thunk.h exec.h\
	cpu-i386.h qemu.h op-i386.c helper-i386.c syscall-i386.h translate-i386.c\
	syscall.c opreg_template.h syscall_defs.h vm86.c\
	dis-asm.h disas.c disas.h alpha-dis.c ppc-dis.c i386-dis.c sparc-dis.c arm-dis.c\
	ppc.ld alpha.ld s390.ld sparc.ld arm.ld exec-i386.h exec-i386.c path.c exec.c mmap.c configure \
	tests/Makefile\
	tests/test-i386.c tests/test-i386-shift.h tests/test-i386.h\
	tests/test-i386-muldiv.h tests/test-i386-code16.S\
	tests/hello.c tests/hello tests/sha1.c \
	tests/testsig.c tests/testclone.c tests/testthread.c \
	tests/runcom.c tests/pi_10.com \
	tests/test_path.c \
	qemu-doc.texi qemu-doc.html

	FILE=qemu-$(VERSION)

	tar:
	rm -rf /tmp/$(FILE)
	mkdir -p /tmp/$(FILE)
	cp -P $(FILES) /tmp/$(FILE)
	( cd /tmp ; tar zcvf ~/$(FILE).tar.gz $(FILE) )
	rm -rf /tmp/$(FILE)

	# generate a binary distribution including the test binary environnment
	BINPATH=/usr/local/qemu-i386

	tarbin:
	tar zcvf /tmp/qemu-$(VERSION)-i386-glibc21.tar.gz \
	$(BINPATH)/etc $(BINPATH)/lib $(BINPATH)/bin $(BINPATH)/usr
	tar zcvf /tmp/qemu-$(VERSION)-i386-wine.tar.gz \
	$(BINPATH)/wine

	ifneq ($(wildcard .depend),)
	include .depend
	endif