| /* |
| * PowerPC CPU initialization for qemu. |
| * |
| * Copyright 2016, David Gibson, Red Hat Inc. <dgibson@redhat.com> |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Lesser General Public |
| * License as published by the Free Software Foundation; either |
| * version 2 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Lesser General Public License for more details. |
| * |
| * You should have received a copy of the GNU Lesser General Public |
| * License along with this library; if not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "sysemu/hw_accel.h" |
| #include "sysemu/kvm.h" |
| #include "kvm_ppc.h" |
| #include "sysemu/cpus.h" |
| #include "qemu/error-report.h" |
| #include "qapi/error.h" |
| #include "qapi/visitor.h" |
| #include "cpu-models.h" |
| |
| typedef struct { |
| const char *name; |
| uint32_t pvr; |
| uint64_t pcr; |
| uint64_t pcr_level; |
| |
| /* |
| * Maximum allowed virtual threads per virtual core |
| * |
| * This is to stop older guests getting confused by seeing more |
| * threads than they think the cpu can support. Usually it's |
| * equal to the number of threads supported on bare metal |
| * hardware, but not always (see POWER9). |
| */ |
| int max_vthreads; |
| } CompatInfo; |
| |
| static const CompatInfo compat_table[] = { |
| /* |
| * Ordered from oldest to newest - the code relies on this |
| */ |
| { /* POWER6, ISA2.05 */ |
| .name = "power6", |
| .pvr = CPU_POWERPC_LOGICAL_2_05, |
| .pcr = PCR_COMPAT_3_00 | PCR_COMPAT_2_07 | PCR_COMPAT_2_06 | |
| PCR_COMPAT_2_05 | PCR_TM_DIS | PCR_VSX_DIS, |
| .pcr_level = PCR_COMPAT_2_05, |
| .max_vthreads = 2, |
| }, |
| { /* POWER7, ISA2.06 */ |
| .name = "power7", |
| .pvr = CPU_POWERPC_LOGICAL_2_06, |
| .pcr = PCR_COMPAT_3_00 | PCR_COMPAT_2_07 | PCR_COMPAT_2_06 | PCR_TM_DIS, |
| .pcr_level = PCR_COMPAT_2_06, |
| .max_vthreads = 4, |
| }, |
| { |
| .name = "power7+", |
| .pvr = CPU_POWERPC_LOGICAL_2_06_PLUS, |
| .pcr = PCR_COMPAT_3_00 | PCR_COMPAT_2_07 | PCR_COMPAT_2_06 | PCR_TM_DIS, |
| .pcr_level = PCR_COMPAT_2_06, |
| .max_vthreads = 4, |
| }, |
| { /* POWER8, ISA2.07 */ |
| .name = "power8", |
| .pvr = CPU_POWERPC_LOGICAL_2_07, |
| .pcr = PCR_COMPAT_3_00 | PCR_COMPAT_2_07, |
| .pcr_level = PCR_COMPAT_2_07, |
| .max_vthreads = 8, |
| }, |
| { /* POWER9, ISA3.00 */ |
| .name = "power9", |
| .pvr = CPU_POWERPC_LOGICAL_3_00, |
| .pcr = PCR_COMPAT_3_00, |
| .pcr_level = PCR_COMPAT_3_00, |
| /* |
| * POWER9 hardware only supports 4 threads / core, but this |
| * limit is for guests. We need to support 8 vthreads/vcore |
| * on POWER9 for POWER8 compatibility guests, and it's very |
| * confusing if half of the threads disappear from the guest |
| * if it announces it's POWER9 aware at CAS time. |
| */ |
| .max_vthreads = 8, |
| }, |
| }; |
| |
| static const CompatInfo *compat_by_pvr(uint32_t pvr) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(compat_table); i++) { |
| if (compat_table[i].pvr == pvr) { |
| return &compat_table[i]; |
| } |
| } |
| return NULL; |
| } |
| |
| static bool pcc_compat(PowerPCCPUClass *pcc, uint32_t compat_pvr, |
| uint32_t min_compat_pvr, uint32_t max_compat_pvr) |
| { |
| const CompatInfo *compat = compat_by_pvr(compat_pvr); |
| const CompatInfo *min = compat_by_pvr(min_compat_pvr); |
| const CompatInfo *max = compat_by_pvr(max_compat_pvr); |
| |
| g_assert(!min_compat_pvr || min); |
| g_assert(!max_compat_pvr || max); |
| |
| if (!compat) { |
| /* Not a recognized logical PVR */ |
| return false; |
| } |
| if ((min && (compat < min)) || (max && (compat > max))) { |
| /* Outside specified range */ |
| return false; |
| } |
| if (!(pcc->pcr_supported & compat->pcr_level)) { |
| /* Not supported by this CPU */ |
| return false; |
| } |
| return true; |
| } |
| |
| bool ppc_check_compat(PowerPCCPU *cpu, uint32_t compat_pvr, |
| uint32_t min_compat_pvr, uint32_t max_compat_pvr) |
| { |
| PowerPCCPUClass *pcc = POWERPC_CPU_GET_CLASS(cpu); |
| |
| #if !defined(CONFIG_USER_ONLY) |
| g_assert(cpu->vhyp); |
| #endif |
| |
| return pcc_compat(pcc, compat_pvr, min_compat_pvr, max_compat_pvr); |
| } |
| |
| bool ppc_type_check_compat(const char *cputype, uint32_t compat_pvr, |
| uint32_t min_compat_pvr, uint32_t max_compat_pvr) |
| { |
| PowerPCCPUClass *pcc = POWERPC_CPU_CLASS(object_class_by_name(cputype)); |
| return pcc_compat(pcc, compat_pvr, min_compat_pvr, max_compat_pvr); |
| } |
| |
| void ppc_set_compat(PowerPCCPU *cpu, uint32_t compat_pvr, Error **errp) |
| { |
| const CompatInfo *compat = compat_by_pvr(compat_pvr); |
| CPUPPCState *env = &cpu->env; |
| PowerPCCPUClass *pcc = POWERPC_CPU_GET_CLASS(cpu); |
| uint64_t pcr; |
| |
| if (!compat_pvr) { |
| pcr = 0; |
| } else if (!compat) { |
| error_setg(errp, "Unknown compatibility PVR 0x%08"PRIx32, compat_pvr); |
| return; |
| } else if (!ppc_check_compat(cpu, compat_pvr, 0, 0)) { |
| error_setg(errp, "Compatibility PVR 0x%08"PRIx32" not valid for CPU", |
| compat_pvr); |
| return; |
| } else { |
| pcr = compat->pcr; |
| } |
| |
| cpu_synchronize_state(CPU(cpu)); |
| |
| if (kvm_enabled() && cpu->compat_pvr != compat_pvr) { |
| int ret = kvmppc_set_compat(cpu, compat_pvr); |
| if (ret < 0) { |
| error_setg_errno(errp, -ret, |
| "Unable to set CPU compatibility mode in KVM"); |
| return; |
| } |
| } |
| |
| cpu->compat_pvr = compat_pvr; |
| env->spr[SPR_PCR] = pcr & pcc->pcr_mask; |
| } |
| |
| typedef struct { |
| uint32_t compat_pvr; |
| Error *err; |
| } SetCompatState; |
| |
| static void do_set_compat(CPUState *cs, run_on_cpu_data arg) |
| { |
| PowerPCCPU *cpu = POWERPC_CPU(cs); |
| SetCompatState *s = arg.host_ptr; |
| |
| ppc_set_compat(cpu, s->compat_pvr, &s->err); |
| } |
| |
| void ppc_set_compat_all(uint32_t compat_pvr, Error **errp) |
| { |
| CPUState *cs; |
| |
| CPU_FOREACH(cs) { |
| SetCompatState s = { |
| .compat_pvr = compat_pvr, |
| .err = NULL, |
| }; |
| |
| run_on_cpu(cs, do_set_compat, RUN_ON_CPU_HOST_PTR(&s)); |
| |
| if (s.err) { |
| error_propagate(errp, s.err); |
| return; |
| } |
| } |
| } |
| |
| int ppc_compat_max_vthreads(PowerPCCPU *cpu) |
| { |
| const CompatInfo *compat = compat_by_pvr(cpu->compat_pvr); |
| int n_threads = CPU(cpu)->nr_threads; |
| |
| if (cpu->compat_pvr) { |
| g_assert(compat); |
| n_threads = MIN(n_threads, compat->max_vthreads); |
| } |
| |
| return n_threads; |
| } |
| |
| static void ppc_compat_prop_get(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| uint32_t compat_pvr = *((uint32_t *)opaque); |
| const char *value; |
| |
| if (!compat_pvr) { |
| value = ""; |
| } else { |
| const CompatInfo *compat = compat_by_pvr(compat_pvr); |
| |
| g_assert(compat); |
| |
| value = compat->name; |
| } |
| |
| visit_type_str(v, name, (char **)&value, errp); |
| } |
| |
| static void ppc_compat_prop_set(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| Error *local_err = NULL; |
| char *value; |
| uint32_t compat_pvr; |
| |
| visit_type_str(v, name, &value, &local_err); |
| if (local_err) { |
| error_propagate(errp, local_err); |
| return; |
| } |
| |
| if (strcmp(value, "") == 0) { |
| compat_pvr = 0; |
| } else { |
| int i; |
| const CompatInfo *compat = NULL; |
| |
| for (i = 0; i < ARRAY_SIZE(compat_table); i++) { |
| if (strcmp(value, compat_table[i].name) == 0) { |
| compat = &compat_table[i]; |
| break; |
| |
| } |
| } |
| |
| if (!compat) { |
| error_setg(errp, "Invalid compatibility mode \"%s\"", value); |
| goto out; |
| } |
| compat_pvr = compat->pvr; |
| } |
| |
| *((uint32_t *)opaque) = compat_pvr; |
| |
| out: |
| g_free(value); |
| } |
| |
| void ppc_compat_add_property(Object *obj, const char *name, |
| uint32_t *compat_pvr, const char *basedesc, |
| Error **errp) |
| { |
| Error *local_err = NULL; |
| gchar *namesv[ARRAY_SIZE(compat_table) + 1]; |
| gchar *names, *desc; |
| int i; |
| |
| object_property_add(obj, name, "string", |
| ppc_compat_prop_get, ppc_compat_prop_set, NULL, |
| compat_pvr, &local_err); |
| if (local_err) { |
| goto out; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(compat_table); i++) { |
| /* |
| * Have to discard const here, because g_strjoinv() takes |
| * (gchar **), not (const gchar **) :( |
| */ |
| namesv[i] = (gchar *)compat_table[i].name; |
| } |
| namesv[ARRAY_SIZE(compat_table)] = NULL; |
| |
| names = g_strjoinv(", ", namesv); |
| desc = g_strdup_printf("%s. Valid values are %s.", basedesc, names); |
| object_property_set_description(obj, name, desc, &local_err); |
| |
| g_free(names); |
| g_free(desc); |
| |
| out: |
| error_propagate(errp, local_err); |
| } |