blob: 5697327e4c004c1133839e86d1117df9b978d24b [file] [log] [blame]
#ifndef HW_SPAPR_H
#define HW_SPAPR_H
#include "qemu/units.h"
#include "sysemu/dma.h"
#include "hw/boards.h"
#include "hw/ppc/spapr_drc.h"
#include "hw/mem/pc-dimm.h"
#include "hw/ppc/spapr_ovec.h"
#include "hw/ppc/spapr_irq.h"
#include "qom/object.h"
#include "hw/ppc/spapr_xive.h" /* For SpaprXive */
#include "hw/ppc/xics.h" /* For ICSState */
#include "hw/ppc/spapr_tpm_proxy.h"
struct SpaprVioBus;
struct SpaprPhbState;
struct SpaprNvram;
typedef struct SpaprEventLogEntry SpaprEventLogEntry;
typedef struct SpaprEventSource SpaprEventSource;
typedef struct SpaprPendingHpt SpaprPendingHpt;
#define HPTE64_V_HPTE_DIRTY 0x0000000000000040ULL
#define SPAPR_ENTRY_POINT 0x100
#define SPAPR_TIMEBASE_FREQ 512000000ULL
#define TYPE_SPAPR_RTC "spapr-rtc"
OBJECT_DECLARE_SIMPLE_TYPE(SpaprRtcState, SPAPR_RTC)
struct SpaprRtcState {
/*< private >*/
DeviceState parent_obj;
int64_t ns_offset;
};
typedef struct SpaprDimmState SpaprDimmState;
#define TYPE_SPAPR_MACHINE "spapr-machine"
OBJECT_DECLARE_TYPE(SpaprMachineState, SpaprMachineClass, SPAPR_MACHINE)
typedef enum {
SPAPR_RESIZE_HPT_DEFAULT = 0,
SPAPR_RESIZE_HPT_DISABLED,
SPAPR_RESIZE_HPT_ENABLED,
SPAPR_RESIZE_HPT_REQUIRED,
} SpaprResizeHpt;
/**
* Capabilities
*/
/* Hardware Transactional Memory */
#define SPAPR_CAP_HTM 0x00
/* Vector Scalar Extensions */
#define SPAPR_CAP_VSX 0x01
/* Decimal Floating Point */
#define SPAPR_CAP_DFP 0x02
/* Cache Flush on Privilege Change */
#define SPAPR_CAP_CFPC 0x03
/* Speculation Barrier Bounds Checking */
#define SPAPR_CAP_SBBC 0x04
/* Indirect Branch Serialisation */
#define SPAPR_CAP_IBS 0x05
/* HPT Maximum Page Size (encoded as a shift) */
#define SPAPR_CAP_HPT_MAXPAGESIZE 0x06
/* Nested KVM-HV */
#define SPAPR_CAP_NESTED_KVM_HV 0x07
/* Large Decrementer */
#define SPAPR_CAP_LARGE_DECREMENTER 0x08
/* Count Cache Flush Assist HW Instruction */
#define SPAPR_CAP_CCF_ASSIST 0x09
/* Implements PAPR FWNMI option */
#define SPAPR_CAP_FWNMI 0x0A
/* Num Caps */
#define SPAPR_CAP_NUM (SPAPR_CAP_FWNMI + 1)
/*
* Capability Values
*/
/* Bool Caps */
#define SPAPR_CAP_OFF 0x00
#define SPAPR_CAP_ON 0x01
/* Custom Caps */
/* Generic */
#define SPAPR_CAP_BROKEN 0x00
#define SPAPR_CAP_WORKAROUND 0x01
#define SPAPR_CAP_FIXED 0x02
/* SPAPR_CAP_IBS (cap-ibs) */
#define SPAPR_CAP_FIXED_IBS 0x02
#define SPAPR_CAP_FIXED_CCD 0x03
#define SPAPR_CAP_FIXED_NA 0x10 /* Lets leave a bit of a gap... */
#define FDT_MAX_SIZE 0x200000
/*
* NUMA related macros. MAX_DISTANCE_REF_POINTS was taken
* from Linux kernel arch/powerpc/mm/numa.h. It represents the
* amount of associativity domains for non-CPU resources.
*
* NUMA_ASSOC_SIZE is the base array size of an ibm,associativity
* array for any non-CPU resource.
*
* VCPU_ASSOC_SIZE represents the size of ibm,associativity array
* for CPUs, which has an extra element (vcpu_id) in the end.
*/
#define MAX_DISTANCE_REF_POINTS 4
#define NUMA_ASSOC_SIZE (MAX_DISTANCE_REF_POINTS + 1)
#define VCPU_ASSOC_SIZE (NUMA_ASSOC_SIZE + 1)
/* Max number of these GPUsper a physical box */
#define NVGPU_MAX_NUM 6
typedef struct SpaprCapabilities SpaprCapabilities;
struct SpaprCapabilities {
uint8_t caps[SPAPR_CAP_NUM];
};
/**
* SpaprMachineClass:
*/
struct SpaprMachineClass {
/*< private >*/
MachineClass parent_class;
/*< public >*/
bool dr_lmb_enabled; /* enable dynamic-reconfig/hotplug of LMBs */
bool dr_phb_enabled; /* enable dynamic-reconfig/hotplug of PHBs */
bool update_dt_enabled; /* enable KVMPPC_H_UPDATE_DT */
bool use_ohci_by_default; /* use USB-OHCI instead of XHCI */
bool pre_2_10_has_unused_icps;
bool legacy_irq_allocation;
uint32_t nr_xirqs;
bool broken_host_serial_model; /* present real host info to the guest */
bool pre_4_1_migration; /* don't migrate hpt-max-page-size */
bool linux_pci_probe;
bool smp_threads_vsmt; /* set VSMT to smp_threads by default */
hwaddr rma_limit; /* clamp the RMA to this size */
bool pre_5_1_assoc_refpoints;
bool pre_5_2_numa_associativity;
bool (*phb_placement)(SpaprMachineState *spapr, uint32_t index,
uint64_t *buid, hwaddr *pio,
hwaddr *mmio32, hwaddr *mmio64,
unsigned n_dma, uint32_t *liobns, hwaddr *nv2gpa,
hwaddr *nv2atsd, Error **errp);
SpaprResizeHpt resize_hpt_default;
SpaprCapabilities default_caps;
SpaprIrq *irq;
};
/**
* SpaprMachineState:
*/
struct SpaprMachineState {
/*< private >*/
MachineState parent_obj;
struct SpaprVioBus *vio_bus;
QLIST_HEAD(, SpaprPhbState) phbs;
struct SpaprNvram *nvram;
SpaprRtcState rtc;
SpaprResizeHpt resize_hpt;
void *htab;
uint32_t htab_shift;
uint64_t patb_entry; /* Process tbl registed in H_REGISTER_PROC_TBL */
SpaprPendingHpt *pending_hpt; /* in-progress resize */
hwaddr rma_size;
uint32_t fdt_size;
uint32_t fdt_initial_size;
void *fdt_blob;
long kernel_size;
bool kernel_le;
uint64_t kernel_addr;
uint32_t initrd_base;
long initrd_size;
uint64_t rtc_offset; /* Now used only during incoming migration */
struct PPCTimebase tb;
bool has_graphics;
uint32_t vsmt; /* Virtual SMT mode (KVM's "core stride") */
Notifier epow_notifier;
QTAILQ_HEAD(, SpaprEventLogEntry) pending_events;
bool use_hotplug_event_source;
SpaprEventSource *event_sources;
/* ibm,client-architecture-support option negotiation */
bool cas_pre_isa3_guest;
SpaprOptionVector *ov5; /* QEMU-supported option vectors */
SpaprOptionVector *ov5_cas; /* negotiated (via CAS) option vectors */
uint32_t max_compat_pvr;
/* Migration state */
int htab_save_index;
bool htab_first_pass;
int htab_fd;
/* Pending DIMM unplug cache. It is populated when a LMB
* unplug starts. It can be regenerated if a migration
* occurs during the unplug process. */
QTAILQ_HEAD(, SpaprDimmState) pending_dimm_unplugs;
/* State related to FWNMI option */
/* System Reset and Machine Check Notification Routine addresses
* registered by "ibm,nmi-register" RTAS call.
*/
target_ulong fwnmi_system_reset_addr;
target_ulong fwnmi_machine_check_addr;
/* Machine Check FWNMI synchronization, fwnmi_machine_check_interlock is
* set to -1 if a FWNMI machine check is not in progress, else is set to
* the CPU that was delivered the machine check, and is set back to -1
* when that CPU makes an "ibm,nmi-interlock" RTAS call. The cond is used
* to synchronize other CPUs.
*/
int fwnmi_machine_check_interlock;
QemuCond fwnmi_machine_check_interlock_cond;
/* Set by -boot */
char *boot_device;
/*< public >*/
char *kvm_type;
char *host_model;
char *host_serial;
int32_t irq_map_nr;
unsigned long *irq_map;
SpaprIrq *irq;
qemu_irq *qirqs;
SpaprInterruptController *active_intc;
ICSState *ics;
SpaprXive *xive;
bool cmd_line_caps[SPAPR_CAP_NUM];
SpaprCapabilities def, eff, mig;
unsigned gpu_numa_id;
SpaprTpmProxy *tpm_proxy;
uint32_t numa_assoc_array[MAX_NODES + NVGPU_MAX_NUM][NUMA_ASSOC_SIZE];
Error *fwnmi_migration_blocker;
};
#define H_SUCCESS 0
#define H_BUSY 1 /* Hardware busy -- retry later */
#define H_CLOSED 2 /* Resource closed */
#define H_NOT_AVAILABLE 3
#define H_CONSTRAINED 4 /* Resource request constrained to max allowed */
#define H_PARTIAL 5
#define H_IN_PROGRESS 14 /* Kind of like busy */
#define H_PAGE_REGISTERED 15
#define H_PARTIAL_STORE 16
#define H_PENDING 17 /* returned from H_POLL_PENDING */
#define H_CONTINUE 18 /* Returned from H_Join on success */
#define H_LONG_BUSY_START_RANGE 9900 /* Start of long busy range */
#define H_LONG_BUSY_ORDER_1_MSEC 9900 /* Long busy, hint that 1msec \
is a good time to retry */
#define H_LONG_BUSY_ORDER_10_MSEC 9901 /* Long busy, hint that 10msec \
is a good time to retry */
#define H_LONG_BUSY_ORDER_100_MSEC 9902 /* Long busy, hint that 100msec \
is a good time to retry */
#define H_LONG_BUSY_ORDER_1_SEC 9903 /* Long busy, hint that 1sec \
is a good time to retry */
#define H_LONG_BUSY_ORDER_10_SEC 9904 /* Long busy, hint that 10sec \
is a good time to retry */
#define H_LONG_BUSY_ORDER_100_SEC 9905 /* Long busy, hint that 100sec \
is a good time to retry */
#define H_LONG_BUSY_END_RANGE 9905 /* End of long busy range */
#define H_HARDWARE -1 /* Hardware error */
#define H_FUNCTION -2 /* Function not supported */
#define H_PRIVILEGE -3 /* Caller not privileged */
#define H_PARAMETER -4 /* Parameter invalid, out-of-range or conflicting */
#define H_BAD_MODE -5 /* Illegal msr value */
#define H_PTEG_FULL -6 /* PTEG is full */
#define H_NOT_FOUND -7 /* PTE was not found" */
#define H_RESERVED_DABR -8 /* DABR address is reserved by the hypervisor on this processor" */
#define H_NO_MEM -9
#define H_AUTHORITY -10
#define H_PERMISSION -11
#define H_DROPPED -12
#define H_SOURCE_PARM -13
#define H_DEST_PARM -14
#define H_REMOTE_PARM -15
#define H_RESOURCE -16
#define H_ADAPTER_PARM -17
#define H_RH_PARM -18
#define H_RCQ_PARM -19
#define H_SCQ_PARM -20
#define H_EQ_PARM -21
#define H_RT_PARM -22
#define H_ST_PARM -23
#define H_SIGT_PARM -24
#define H_TOKEN_PARM -25
#define H_MLENGTH_PARM -27
#define H_MEM_PARM -28
#define H_MEM_ACCESS_PARM -29
#define H_ATTR_PARM -30
#define H_PORT_PARM -31
#define H_MCG_PARM -32
#define H_VL_PARM -33
#define H_TSIZE_PARM -34
#define H_TRACE_PARM -35
#define H_MASK_PARM -37
#define H_MCG_FULL -38
#define H_ALIAS_EXIST -39
#define H_P_COUNTER -40
#define H_TABLE_FULL -41
#define H_ALT_TABLE -42
#define H_MR_CONDITION -43
#define H_NOT_ENOUGH_RESOURCES -44
#define H_R_STATE -45
#define H_RESCINDEND -46
#define H_P2 -55
#define H_P3 -56
#define H_P4 -57
#define H_P5 -58
#define H_P6 -59
#define H_P7 -60
#define H_P8 -61
#define H_P9 -62
#define H_OVERLAP -68
#define H_UNSUPPORTED_FLAG -256
#define H_MULTI_THREADS_ACTIVE -9005
/* Long Busy is a condition that can be returned by the firmware
* when a call cannot be completed now, but the identical call
* should be retried later. This prevents calls blocking in the
* firmware for long periods of time. Annoyingly the firmware can return
* a range of return codes, hinting at how long we should wait before
* retrying. If you don't care for the hint, the macro below is a good
* way to check for the long_busy return codes
*/
#define H_IS_LONG_BUSY(x) ((x >= H_LONG_BUSY_START_RANGE) \
&& (x <= H_LONG_BUSY_END_RANGE))
/* Flags */
#define H_LARGE_PAGE (1ULL<<(63-16))
#define H_EXACT (1ULL<<(63-24)) /* Use exact PTE or return H_PTEG_FULL */
#define H_R_XLATE (1ULL<<(63-25)) /* include a valid logical page num in the pte if the valid bit is set */
#define H_READ_4 (1ULL<<(63-26)) /* Return 4 PTEs */
#define H_PAGE_STATE_CHANGE (1ULL<<(63-28))
#define H_PAGE_UNUSED ((1ULL<<(63-29)) | (1ULL<<(63-30)))
#define H_PAGE_SET_UNUSED (H_PAGE_STATE_CHANGE | H_PAGE_UNUSED)
#define H_PAGE_SET_LOANED (H_PAGE_SET_UNUSED | (1ULL<<(63-31)))
#define H_PAGE_SET_ACTIVE H_PAGE_STATE_CHANGE
#define H_AVPN (1ULL<<(63-32)) /* An avpn is provided as a sanity test */
#define H_ANDCOND (1ULL<<(63-33))
#define H_ICACHE_INVALIDATE (1ULL<<(63-40)) /* icbi, etc. (ignored for IO pages) */
#define H_ICACHE_SYNCHRONIZE (1ULL<<(63-41)) /* dcbst, icbi, etc (ignored for IO pages */
#define H_ZERO_PAGE (1ULL<<(63-48)) /* zero the page before mapping (ignored for IO pages) */
#define H_COPY_PAGE (1ULL<<(63-49))
#define H_N (1ULL<<(63-61))
#define H_PP1 (1ULL<<(63-62))
#define H_PP2 (1ULL<<(63-63))
/* Values for 2nd argument to H_SET_MODE */
#define H_SET_MODE_RESOURCE_SET_CIABR 1
#define H_SET_MODE_RESOURCE_SET_DAWR0 2
#define H_SET_MODE_RESOURCE_ADDR_TRANS_MODE 3
#define H_SET_MODE_RESOURCE_LE 4
/* Flags for H_SET_MODE_RESOURCE_LE */
#define H_SET_MODE_ENDIAN_BIG 0
#define H_SET_MODE_ENDIAN_LITTLE 1
/* VASI States */
#define H_VASI_INVALID 0
#define H_VASI_ENABLED 1
#define H_VASI_ABORTED 2
#define H_VASI_SUSPENDING 3
#define H_VASI_SUSPENDED 4
#define H_VASI_RESUMED 5
#define H_VASI_COMPLETED 6
/* DABRX flags */
#define H_DABRX_HYPERVISOR (1ULL<<(63-61))
#define H_DABRX_KERNEL (1ULL<<(63-62))
#define H_DABRX_USER (1ULL<<(63-63))
/* Values for KVM_PPC_GET_CPU_CHAR & H_GET_CPU_CHARACTERISTICS */
#define H_CPU_CHAR_SPEC_BAR_ORI31 PPC_BIT(0)
#define H_CPU_CHAR_BCCTRL_SERIALISED PPC_BIT(1)
#define H_CPU_CHAR_L1D_FLUSH_ORI30 PPC_BIT(2)
#define H_CPU_CHAR_L1D_FLUSH_TRIG2 PPC_BIT(3)
#define H_CPU_CHAR_L1D_THREAD_PRIV PPC_BIT(4)
#define H_CPU_CHAR_HON_BRANCH_HINTS PPC_BIT(5)
#define H_CPU_CHAR_THR_RECONF_TRIG PPC_BIT(6)
#define H_CPU_CHAR_CACHE_COUNT_DIS PPC_BIT(7)
#define H_CPU_CHAR_BCCTR_FLUSH_ASSIST PPC_BIT(9)
#define H_CPU_BEHAV_FAVOUR_SECURITY PPC_BIT(0)
#define H_CPU_BEHAV_L1D_FLUSH_PR PPC_BIT(1)
#define H_CPU_BEHAV_BNDS_CHK_SPEC_BAR PPC_BIT(2)
#define H_CPU_BEHAV_FLUSH_COUNT_CACHE PPC_BIT(5)
/* Each control block has to be on a 4K boundary */
#define H_CB_ALIGNMENT 4096
/* pSeries hypervisor opcodes */
#define H_REMOVE 0x04
#define H_ENTER 0x08
#define H_READ 0x0c
#define H_CLEAR_MOD 0x10
#define H_CLEAR_REF 0x14
#define H_PROTECT 0x18
#define H_GET_TCE 0x1c
#define H_PUT_TCE 0x20
#define H_SET_SPRG0 0x24
#define H_SET_DABR 0x28
#define H_PAGE_INIT 0x2c
#define H_SET_ASR 0x30
#define H_ASR_ON 0x34
#define H_ASR_OFF 0x38
#define H_LOGICAL_CI_LOAD 0x3c
#define H_LOGICAL_CI_STORE 0x40
#define H_LOGICAL_CACHE_LOAD 0x44
#define H_LOGICAL_CACHE_STORE 0x48
#define H_LOGICAL_ICBI 0x4c
#define H_LOGICAL_DCBF 0x50
#define H_GET_TERM_CHAR 0x54
#define H_PUT_TERM_CHAR 0x58
#define H_REAL_TO_LOGICAL 0x5c
#define H_HYPERVISOR_DATA 0x60
#define H_EOI 0x64
#define H_CPPR 0x68
#define H_IPI 0x6c
#define H_IPOLL 0x70
#define H_XIRR 0x74
#define H_PERFMON 0x7c
#define H_MIGRATE_DMA 0x78
#define H_REGISTER_VPA 0xDC
#define H_CEDE 0xE0
#define H_CONFER 0xE4
#define H_PROD 0xE8
#define H_GET_PPP 0xEC
#define H_SET_PPP 0xF0
#define H_PURR 0xF4
#define H_PIC 0xF8
#define H_REG_CRQ 0xFC
#define H_FREE_CRQ 0x100
#define H_VIO_SIGNAL 0x104
#define H_SEND_CRQ 0x108
#define H_COPY_RDMA 0x110
#define H_REGISTER_LOGICAL_LAN 0x114
#define H_FREE_LOGICAL_LAN 0x118
#define H_ADD_LOGICAL_LAN_BUFFER 0x11C
#define H_SEND_LOGICAL_LAN 0x120
#define H_BULK_REMOVE 0x124
#define H_MULTICAST_CTRL 0x130
#define H_SET_XDABR 0x134
#define H_STUFF_TCE 0x138
#define H_PUT_TCE_INDIRECT 0x13C
#define H_CHANGE_LOGICAL_LAN_MAC 0x14C
#define H_VTERM_PARTNER_INFO 0x150
#define H_REGISTER_VTERM 0x154
#define H_FREE_VTERM 0x158
#define H_RESET_EVENTS 0x15C
#define H_ALLOC_RESOURCE 0x160
#define H_FREE_RESOURCE 0x164
#define H_MODIFY_QP 0x168
#define H_QUERY_QP 0x16C
#define H_REREGISTER_PMR 0x170
#define H_REGISTER_SMR 0x174
#define H_QUERY_MR 0x178
#define H_QUERY_MW 0x17C
#define H_QUERY_HCA 0x180
#define H_QUERY_PORT 0x184
#define H_MODIFY_PORT 0x188
#define H_DEFINE_AQP1 0x18C
#define H_GET_TRACE_BUFFER 0x190
#define H_DEFINE_AQP0 0x194
#define H_RESIZE_MR 0x198
#define H_ATTACH_MCQP 0x19C
#define H_DETACH_MCQP 0x1A0
#define H_CREATE_RPT 0x1A4
#define H_REMOVE_RPT 0x1A8
#define H_REGISTER_RPAGES 0x1AC
#define H_DISABLE_AND_GETC 0x1B0
#define H_ERROR_DATA 0x1B4
#define H_GET_HCA_INFO 0x1B8
#define H_GET_PERF_COUNT 0x1BC
#define H_MANAGE_TRACE 0x1C0
#define H_GET_CPU_CHARACTERISTICS 0x1C8
#define H_FREE_LOGICAL_LAN_BUFFER 0x1D4
#define H_QUERY_INT_STATE 0x1E4
#define H_POLL_PENDING 0x1D8
#define H_ILLAN_ATTRIBUTES 0x244
#define H_MODIFY_HEA_QP 0x250
#define H_QUERY_HEA_QP 0x254
#define H_QUERY_HEA 0x258
#define H_QUERY_HEA_PORT 0x25C
#define H_MODIFY_HEA_PORT 0x260
#define H_REG_BCMC 0x264
#define H_DEREG_BCMC 0x268
#define H_REGISTER_HEA_RPAGES 0x26C
#define H_DISABLE_AND_GET_HEA 0x270
#define H_GET_HEA_INFO 0x274
#define H_ALLOC_HEA_RESOURCE 0x278
#define H_ADD_CONN 0x284
#define H_DEL_CONN 0x288
#define H_JOIN 0x298
#define H_VASI_STATE 0x2A4
#define H_ENABLE_CRQ 0x2B0
#define H_GET_EM_PARMS 0x2B8
#define H_SET_MPP 0x2D0
#define H_GET_MPP 0x2D4
#define H_HOME_NODE_ASSOCIATIVITY 0x2EC
#define H_XIRR_X 0x2FC
#define H_RANDOM 0x300
#define H_SET_MODE 0x31C
#define H_RESIZE_HPT_PREPARE 0x36C
#define H_RESIZE_HPT_COMMIT 0x370
#define H_CLEAN_SLB 0x374
#define H_INVALIDATE_PID 0x378
#define H_REGISTER_PROC_TBL 0x37C
#define H_SIGNAL_SYS_RESET 0x380
#define H_INT_GET_SOURCE_INFO 0x3A8
#define H_INT_SET_SOURCE_CONFIG 0x3AC
#define H_INT_GET_SOURCE_CONFIG 0x3B0
#define H_INT_GET_QUEUE_INFO 0x3B4
#define H_INT_SET_QUEUE_CONFIG 0x3B8
#define H_INT_GET_QUEUE_CONFIG 0x3BC
#define H_INT_SET_OS_REPORTING_LINE 0x3C0
#define H_INT_GET_OS_REPORTING_LINE 0x3C4
#define H_INT_ESB 0x3C8
#define H_INT_SYNC 0x3CC
#define H_INT_RESET 0x3D0
#define H_SCM_READ_METADATA 0x3E4
#define H_SCM_WRITE_METADATA 0x3E8
#define H_SCM_BIND_MEM 0x3EC
#define H_SCM_UNBIND_MEM 0x3F0
#define H_SCM_UNBIND_ALL 0x3FC
#define H_SCM_HEALTH 0x400
#define MAX_HCALL_OPCODE H_SCM_HEALTH
/* The hcalls above are standardized in PAPR and implemented by pHyp
* as well.
*
* We also need some hcalls which are specific to qemu / KVM-on-POWER.
* We put those into the 0xf000-0xfffc range which is reserved by PAPR
* for "platform-specific" hcalls.
*/
#define KVMPPC_HCALL_BASE 0xf000
#define KVMPPC_H_RTAS (KVMPPC_HCALL_BASE + 0x0)
#define KVMPPC_H_LOGICAL_MEMOP (KVMPPC_HCALL_BASE + 0x1)
/* Client Architecture support */
#define KVMPPC_H_CAS (KVMPPC_HCALL_BASE + 0x2)
#define KVMPPC_H_UPDATE_DT (KVMPPC_HCALL_BASE + 0x3)
#define KVMPPC_HCALL_MAX KVMPPC_H_UPDATE_DT
/*
* The hcall range 0xEF00 to 0xEF80 is reserved for use in facilitating
* Secure VM mode via an Ultravisor / Protected Execution Facility
*/
#define SVM_HCALL_BASE 0xEF00
#define SVM_H_TPM_COMM 0xEF10
#define SVM_HCALL_MAX SVM_H_TPM_COMM
typedef struct SpaprDeviceTreeUpdateHeader {
uint32_t version_id;
} SpaprDeviceTreeUpdateHeader;
#define hcall_dprintf(fmt, ...) \
do { \
qemu_log_mask(LOG_GUEST_ERROR, "%s: " fmt, __func__, ## __VA_ARGS__); \
} while (0)
typedef target_ulong (*spapr_hcall_fn)(PowerPCCPU *cpu, SpaprMachineState *sm,
target_ulong opcode,
target_ulong *args);
void spapr_register_hypercall(target_ulong opcode, spapr_hcall_fn fn);
target_ulong spapr_hypercall(PowerPCCPU *cpu, target_ulong opcode,
target_ulong *args);
target_ulong softmmu_resize_hpt_prepare(PowerPCCPU *cpu, SpaprMachineState *spapr,
target_ulong shift);
target_ulong softmmu_resize_hpt_commit(PowerPCCPU *cpu, SpaprMachineState *spapr,
target_ulong flags, target_ulong shift);
bool is_ram_address(SpaprMachineState *spapr, hwaddr addr);
void push_sregs_to_kvm_pr(SpaprMachineState *spapr);
/* Virtual Processor Area structure constants */
#define VPA_MIN_SIZE 640
#define VPA_SIZE_OFFSET 0x4
#define VPA_SHARED_PROC_OFFSET 0x9
#define VPA_SHARED_PROC_VAL 0x2
#define VPA_DISPATCH_COUNTER 0x100
/* ibm,set-eeh-option */
#define RTAS_EEH_DISABLE 0
#define RTAS_EEH_ENABLE 1
#define RTAS_EEH_THAW_IO 2
#define RTAS_EEH_THAW_DMA 3
/* ibm,get-config-addr-info2 */
#define RTAS_GET_PE_ADDR 0
#define RTAS_GET_PE_MODE 1
#define RTAS_PE_MODE_NONE 0
#define RTAS_PE_MODE_NOT_SHARED 1
#define RTAS_PE_MODE_SHARED 2
/* ibm,read-slot-reset-state2 */
#define RTAS_EEH_PE_STATE_NORMAL 0
#define RTAS_EEH_PE_STATE_RESET 1
#define RTAS_EEH_PE_STATE_STOPPED_IO_DMA 2
#define RTAS_EEH_PE_STATE_STOPPED_DMA 4
#define RTAS_EEH_PE_STATE_UNAVAIL 5
#define RTAS_EEH_NOT_SUPPORT 0
#define RTAS_EEH_SUPPORT 1
#define RTAS_EEH_PE_UNAVAIL_INFO 1000
#define RTAS_EEH_PE_RECOVER_INFO 0
/* ibm,set-slot-reset */
#define RTAS_SLOT_RESET_DEACTIVATE 0
#define RTAS_SLOT_RESET_HOT 1
#define RTAS_SLOT_RESET_FUNDAMENTAL 3
/* ibm,slot-error-detail */
#define RTAS_SLOT_TEMP_ERR_LOG 1
#define RTAS_SLOT_PERM_ERR_LOG 2
/* RTAS return codes */
#define RTAS_OUT_SUCCESS 0
#define RTAS_OUT_NO_ERRORS_FOUND 1
#define RTAS_OUT_HW_ERROR -1
#define RTAS_OUT_BUSY -2
#define RTAS_OUT_PARAM_ERROR -3
#define RTAS_OUT_NOT_SUPPORTED -3
#define RTAS_OUT_NO_SUCH_INDICATOR -3
#define RTAS_OUT_NOT_AUTHORIZED -9002
#define RTAS_OUT_SYSPARM_PARAM_ERROR -9999
/* DDW pagesize mask values from ibm,query-pe-dma-window */
#define RTAS_DDW_PGSIZE_4K 0x01
#define RTAS_DDW_PGSIZE_64K 0x02
#define RTAS_DDW_PGSIZE_16M 0x04
#define RTAS_DDW_PGSIZE_32M 0x08
#define RTAS_DDW_PGSIZE_64M 0x10
#define RTAS_DDW_PGSIZE_128M 0x20
#define RTAS_DDW_PGSIZE_256M 0x40
#define RTAS_DDW_PGSIZE_16G 0x80
/* RTAS tokens */
#define RTAS_TOKEN_BASE 0x2000
#define RTAS_DISPLAY_CHARACTER (RTAS_TOKEN_BASE + 0x00)
#define RTAS_GET_TIME_OF_DAY (RTAS_TOKEN_BASE + 0x01)
#define RTAS_SET_TIME_OF_DAY (RTAS_TOKEN_BASE + 0x02)
#define RTAS_POWER_OFF (RTAS_TOKEN_BASE + 0x03)
#define RTAS_SYSTEM_REBOOT (RTAS_TOKEN_BASE + 0x04)
#define RTAS_QUERY_CPU_STOPPED_STATE (RTAS_TOKEN_BASE + 0x05)
#define RTAS_START_CPU (RTAS_TOKEN_BASE + 0x06)
#define RTAS_STOP_SELF (RTAS_TOKEN_BASE + 0x07)
#define RTAS_IBM_GET_SYSTEM_PARAMETER (RTAS_TOKEN_BASE + 0x08)
#define RTAS_IBM_SET_SYSTEM_PARAMETER (RTAS_TOKEN_BASE + 0x09)
#define RTAS_IBM_SET_XIVE (RTAS_TOKEN_BASE + 0x0A)
#define RTAS_IBM_GET_XIVE (RTAS_TOKEN_BASE + 0x0B)
#define RTAS_IBM_INT_OFF (RTAS_TOKEN_BASE + 0x0C)
#define RTAS_IBM_INT_ON (RTAS_TOKEN_BASE + 0x0D)
#define RTAS_CHECK_EXCEPTION (RTAS_TOKEN_BASE + 0x0E)
#define RTAS_EVENT_SCAN (RTAS_TOKEN_BASE + 0x0F)
#define RTAS_IBM_SET_TCE_BYPASS (RTAS_TOKEN_BASE + 0x10)
#define RTAS_QUIESCE (RTAS_TOKEN_BASE + 0x11)
#define RTAS_NVRAM_FETCH (RTAS_TOKEN_BASE + 0x12)
#define RTAS_NVRAM_STORE (RTAS_TOKEN_BASE + 0x13)
#define RTAS_READ_PCI_CONFIG (RTAS_TOKEN_BASE + 0x14)
#define RTAS_WRITE_PCI_CONFIG (RTAS_TOKEN_BASE + 0x15)
#define RTAS_IBM_READ_PCI_CONFIG (RTAS_TOKEN_BASE + 0x16)
#define RTAS_IBM_WRITE_PCI_CONFIG (RTAS_TOKEN_BASE + 0x17)
#define RTAS_IBM_QUERY_INTERRUPT_SOURCE_NUMBER (RTAS_TOKEN_BASE + 0x18)
#define RTAS_IBM_CHANGE_MSI (RTAS_TOKEN_BASE + 0x19)
#define RTAS_SET_INDICATOR (RTAS_TOKEN_BASE + 0x1A)
#define RTAS_SET_POWER_LEVEL (RTAS_TOKEN_BASE + 0x1B)
#define RTAS_GET_POWER_LEVEL (RTAS_TOKEN_BASE + 0x1C)
#define RTAS_GET_SENSOR_STATE (RTAS_TOKEN_BASE + 0x1D)
#define RTAS_IBM_CONFIGURE_CONNECTOR (RTAS_TOKEN_BASE + 0x1E)
#define RTAS_IBM_OS_TERM (RTAS_TOKEN_BASE + 0x1F)
#define RTAS_IBM_SET_EEH_OPTION (RTAS_TOKEN_BASE + 0x20)
#define RTAS_IBM_GET_CONFIG_ADDR_INFO2 (RTAS_TOKEN_BASE + 0x21)
#define RTAS_IBM_READ_SLOT_RESET_STATE2 (RTAS_TOKEN_BASE + 0x22)
#define RTAS_IBM_SET_SLOT_RESET (RTAS_TOKEN_BASE + 0x23)
#define RTAS_IBM_CONFIGURE_PE (RTAS_TOKEN_BASE + 0x24)
#define RTAS_IBM_SLOT_ERROR_DETAIL (RTAS_TOKEN_BASE + 0x25)
#define RTAS_IBM_QUERY_PE_DMA_WINDOW (RTAS_TOKEN_BASE + 0x26)
#define RTAS_IBM_CREATE_PE_DMA_WINDOW (RTAS_TOKEN_BASE + 0x27)
#define RTAS_IBM_REMOVE_PE_DMA_WINDOW (RTAS_TOKEN_BASE + 0x28)
#define RTAS_IBM_RESET_PE_DMA_WINDOW (RTAS_TOKEN_BASE + 0x29)
#define RTAS_IBM_SUSPEND_ME (RTAS_TOKEN_BASE + 0x2A)
#define RTAS_IBM_NMI_REGISTER (RTAS_TOKEN_BASE + 0x2B)
#define RTAS_IBM_NMI_INTERLOCK (RTAS_TOKEN_BASE + 0x2C)
#define RTAS_TOKEN_MAX (RTAS_TOKEN_BASE + 0x2D)
/* RTAS ibm,get-system-parameter token values */
#define RTAS_SYSPARM_SPLPAR_CHARACTERISTICS 20
#define RTAS_SYSPARM_DIAGNOSTICS_RUN_MODE 42
#define RTAS_SYSPARM_UUID 48
/* RTAS indicator/sensor types
*
* as defined by PAPR+ 2.7 7.3.5.4, Table 41
*
* NOTE: currently only DR-related sensors are implemented here
*/
#define RTAS_SENSOR_TYPE_ISOLATION_STATE 9001
#define RTAS_SENSOR_TYPE_DR 9002
#define RTAS_SENSOR_TYPE_ALLOCATION_STATE 9003
#define RTAS_SENSOR_TYPE_ENTITY_SENSE RTAS_SENSOR_TYPE_ALLOCATION_STATE
/* Possible values for the platform-processor-diagnostics-run-mode parameter
* of the RTAS ibm,get-system-parameter call.
*/
#define DIAGNOSTICS_RUN_MODE_DISABLED 0
#define DIAGNOSTICS_RUN_MODE_STAGGERED 1
#define DIAGNOSTICS_RUN_MODE_IMMEDIATE 2
#define DIAGNOSTICS_RUN_MODE_PERIODIC 3
static inline uint64_t ppc64_phys_to_real(uint64_t addr)
{
return addr & ~0xF000000000000000ULL;
}
static inline uint32_t rtas_ld(target_ulong phys, int n)
{
return ldl_be_phys(&address_space_memory, ppc64_phys_to_real(phys + 4*n));
}
static inline uint64_t rtas_ldq(target_ulong phys, int n)
{
return (uint64_t)rtas_ld(phys, n) << 32 | rtas_ld(phys, n + 1);
}
static inline void rtas_st(target_ulong phys, int n, uint32_t val)
{
stl_be_phys(&address_space_memory, ppc64_phys_to_real(phys + 4*n), val);
}
typedef void (*spapr_rtas_fn)(PowerPCCPU *cpu, SpaprMachineState *sm,
uint32_t token,
uint32_t nargs, target_ulong args,
uint32_t nret, target_ulong rets);
void spapr_rtas_register(int token, const char *name, spapr_rtas_fn fn);
target_ulong spapr_rtas_call(PowerPCCPU *cpu, SpaprMachineState *sm,
uint32_t token, uint32_t nargs, target_ulong args,
uint32_t nret, target_ulong rets);
void spapr_dt_rtas_tokens(void *fdt, int rtas);
void spapr_load_rtas(SpaprMachineState *spapr, void *fdt, hwaddr addr);
#define SPAPR_TCE_PAGE_SHIFT 12
#define SPAPR_TCE_PAGE_SIZE (1ULL << SPAPR_TCE_PAGE_SHIFT)
#define SPAPR_TCE_PAGE_MASK (SPAPR_TCE_PAGE_SIZE - 1)
#define SPAPR_VIO_BASE_LIOBN 0x00000000
#define SPAPR_VIO_LIOBN(reg) (0x00000000 | (reg))
#define SPAPR_PCI_LIOBN(phb_index, window_num) \
(0x80000000 | ((phb_index) << 8) | (window_num))
#define SPAPR_IS_PCI_LIOBN(liobn) (!!((liobn) & 0x80000000))
#define SPAPR_PCI_DMA_WINDOW_NUM(liobn) ((liobn) & 0xff)
#define RTAS_MIN_SIZE 20 /* hv_rtas_size in SLOF */
#define RTAS_ERROR_LOG_MAX 2048
/* Offset from rtas-base where error log is placed */
#define RTAS_ERROR_LOG_OFFSET 0x30
#define RTAS_EVENT_SCAN_RATE 1
/* This helper should be used to encode interrupt specifiers when the related
* "interrupt-controller" node has its "#interrupt-cells" property set to 2 (ie,
* VIO devices, RTAS event sources and PHBs).
*/
static inline void spapr_dt_irq(uint32_t *intspec, int irq, bool is_lsi)
{
intspec[0] = cpu_to_be32(irq);
intspec[1] = is_lsi ? cpu_to_be32(1) : 0;
}
#define TYPE_SPAPR_TCE_TABLE "spapr-tce-table"
OBJECT_DECLARE_SIMPLE_TYPE(SpaprTceTable, SPAPR_TCE_TABLE)
#define TYPE_SPAPR_IOMMU_MEMORY_REGION "spapr-iommu-memory-region"
DECLARE_INSTANCE_CHECKER(IOMMUMemoryRegion, SPAPR_IOMMU_MEMORY_REGION,
TYPE_SPAPR_IOMMU_MEMORY_REGION)
struct SpaprTceTable {
DeviceState parent;
uint32_t liobn;
uint32_t nb_table;
uint64_t bus_offset;
uint32_t page_shift;
uint64_t *table;
uint32_t mig_nb_table;
uint64_t *mig_table;
bool bypass;
bool need_vfio;
bool skipping_replay;
int fd;
MemoryRegion root;
IOMMUMemoryRegion iommu;
struct SpaprVioDevice *vdev; /* for @bypass migration compatibility only */
QLIST_ENTRY(SpaprTceTable) list;
};
SpaprTceTable *spapr_tce_find_by_liobn(target_ulong liobn);
struct SpaprEventLogEntry {
uint32_t summary;
uint32_t extended_length;
void *extended_log;
QTAILQ_ENTRY(SpaprEventLogEntry) next;
};
void *spapr_build_fdt(SpaprMachineState *spapr, bool reset, size_t space);
void spapr_events_init(SpaprMachineState *sm);
void spapr_dt_events(SpaprMachineState *sm, void *fdt);
void close_htab_fd(SpaprMachineState *spapr);
void spapr_setup_hpt(SpaprMachineState *spapr);
void spapr_free_hpt(SpaprMachineState *spapr);
void spapr_check_mmu_mode(bool guest_radix);
SpaprTceTable *spapr_tce_new_table(DeviceState *owner, uint32_t liobn);
void spapr_tce_table_enable(SpaprTceTable *tcet,
uint32_t page_shift, uint64_t bus_offset,
uint32_t nb_table);
void spapr_tce_table_disable(SpaprTceTable *tcet);
void spapr_tce_set_need_vfio(SpaprTceTable *tcet, bool need_vfio);
MemoryRegion *spapr_tce_get_iommu(SpaprTceTable *tcet);
int spapr_dma_dt(void *fdt, int node_off, const char *propname,
uint32_t liobn, uint64_t window, uint32_t size);
int spapr_tcet_dma_dt(void *fdt, int node_off, const char *propname,
SpaprTceTable *tcet);
void spapr_pci_switch_vga(SpaprMachineState *spapr, bool big_endian);
void spapr_hotplug_req_add_by_index(SpaprDrc *drc);
void spapr_hotplug_req_remove_by_index(SpaprDrc *drc);
void spapr_hotplug_req_add_by_count(SpaprDrcType drc_type,
uint32_t count);
void spapr_hotplug_req_remove_by_count(SpaprDrcType drc_type,
uint32_t count);
void spapr_hotplug_req_add_by_count_indexed(SpaprDrcType drc_type,
uint32_t count, uint32_t index);
void spapr_hotplug_req_remove_by_count_indexed(SpaprDrcType drc_type,
uint32_t count, uint32_t index);
int spapr_hpt_shift_for_ramsize(uint64_t ramsize);
int spapr_reallocate_hpt(SpaprMachineState *spapr, int shift, Error **errp);
void spapr_clear_pending_events(SpaprMachineState *spapr);
void spapr_clear_pending_hotplug_events(SpaprMachineState *spapr);
void spapr_memory_unplug_rollback(SpaprMachineState *spapr, DeviceState *dev);
int spapr_max_server_number(SpaprMachineState *spapr);
void spapr_store_hpte(PowerPCCPU *cpu, hwaddr ptex,
uint64_t pte0, uint64_t pte1);
void spapr_mce_req_event(PowerPCCPU *cpu, bool recovered);
/* DRC callbacks. */
void spapr_core_release(DeviceState *dev);
int spapr_core_dt_populate(SpaprDrc *drc, SpaprMachineState *spapr,
void *fdt, int *fdt_start_offset, Error **errp);
void spapr_lmb_release(DeviceState *dev);
int spapr_lmb_dt_populate(SpaprDrc *drc, SpaprMachineState *spapr,
void *fdt, int *fdt_start_offset, Error **errp);
void spapr_phb_release(DeviceState *dev);
int spapr_phb_dt_populate(SpaprDrc *drc, SpaprMachineState *spapr,
void *fdt, int *fdt_start_offset, Error **errp);
void spapr_rtc_read(SpaprRtcState *rtc, struct tm *tm, uint32_t *ns);
int spapr_rtc_import_offset(SpaprRtcState *rtc, int64_t legacy_offset);
#define TYPE_SPAPR_RNG "spapr-rng"
#define SPAPR_MEMORY_BLOCK_SIZE ((hwaddr)1 << 28) /* 256MB */
/*
* This defines the maximum number of DIMM slots we can have for sPAPR
* guest. This is not defined by sPAPR but we are defining it to 32 slots
* based on default number of slots provided by PowerPC kernel.
*/
#define SPAPR_MAX_RAM_SLOTS 32
/* 1GB alignment for hotplug memory region */
#define SPAPR_DEVICE_MEM_ALIGN (1 * GiB)
/*
* Number of 32 bit words in each LMB list entry in ibm,dynamic-memory
* property under ibm,dynamic-reconfiguration-memory node.
*/
#define SPAPR_DR_LMB_LIST_ENTRY_SIZE 6
/*
* Defines for flag value in ibm,dynamic-memory property under
* ibm,dynamic-reconfiguration-memory node.
*/
#define SPAPR_LMB_FLAGS_ASSIGNED 0x00000008
#define SPAPR_LMB_FLAGS_DRC_INVALID 0x00000020
#define SPAPR_LMB_FLAGS_RESERVED 0x00000080
#define SPAPR_LMB_FLAGS_HOTREMOVABLE 0x00000100
void spapr_do_system_reset_on_cpu(CPUState *cs, run_on_cpu_data arg);
#define HTAB_SIZE(spapr) (1ULL << ((spapr)->htab_shift))
int spapr_get_vcpu_id(PowerPCCPU *cpu);
bool spapr_set_vcpu_id(PowerPCCPU *cpu, int cpu_index, Error **errp);
PowerPCCPU *spapr_find_cpu(int vcpu_id);
int spapr_caps_pre_load(void *opaque);
int spapr_caps_pre_save(void *opaque);
/*
* Handling of optional capabilities
*/
extern const VMStateDescription vmstate_spapr_cap_htm;
extern const VMStateDescription vmstate_spapr_cap_vsx;
extern const VMStateDescription vmstate_spapr_cap_dfp;
extern const VMStateDescription vmstate_spapr_cap_cfpc;
extern const VMStateDescription vmstate_spapr_cap_sbbc;
extern const VMStateDescription vmstate_spapr_cap_ibs;
extern const VMStateDescription vmstate_spapr_cap_hpt_maxpagesize;
extern const VMStateDescription vmstate_spapr_cap_nested_kvm_hv;
extern const VMStateDescription vmstate_spapr_cap_large_decr;
extern const VMStateDescription vmstate_spapr_cap_ccf_assist;
extern const VMStateDescription vmstate_spapr_cap_fwnmi;
static inline uint8_t spapr_get_cap(SpaprMachineState *spapr, int cap)
{
return spapr->eff.caps[cap];
}
void spapr_caps_init(SpaprMachineState *spapr);
void spapr_caps_apply(SpaprMachineState *spapr);
void spapr_caps_cpu_apply(SpaprMachineState *spapr, PowerPCCPU *cpu);
void spapr_caps_add_properties(SpaprMachineClass *smc);
int spapr_caps_post_migration(SpaprMachineState *spapr);
bool spapr_check_pagesize(SpaprMachineState *spapr, hwaddr pagesize,
Error **errp);
/*
* XIVE definitions
*/
#define SPAPR_OV5_XIVE_LEGACY 0x0
#define SPAPR_OV5_XIVE_EXPLOIT 0x40
#define SPAPR_OV5_XIVE_BOTH 0x80 /* Only to advertise on the platform */
void spapr_set_all_lpcrs(target_ulong value, target_ulong mask);
hwaddr spapr_get_rtas_addr(void);
bool spapr_memory_hot_unplug_supported(SpaprMachineState *spapr);
#endif /* HW_SPAPR_H */