| /* |
| * QEMU model of the LatticeMico32 UART block. |
| * |
| * Copyright (c) 2010 Michael Walle <michael@walle.cc> |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Lesser General Public |
| * License as published by the Free Software Foundation; either |
| * version 2 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Lesser General Public License for more details. |
| * |
| * You should have received a copy of the GNU Lesser General Public |
| * License along with this library; if not, see <http://www.gnu.org/licenses/>. |
| * |
| * |
| * Specification available at: |
| * http://www.latticesemi.com/documents/mico32uart.pdf |
| */ |
| |
| |
| #include "hw/hw.h" |
| #include "hw/sysbus.h" |
| #include "trace.h" |
| #include "sysemu/char.h" |
| #include "qemu/error-report.h" |
| |
| enum { |
| R_RXTX = 0, |
| R_IER, |
| R_IIR, |
| R_LCR, |
| R_MCR, |
| R_LSR, |
| R_MSR, |
| R_DIV, |
| R_MAX |
| }; |
| |
| enum { |
| IER_RBRI = (1<<0), |
| IER_THRI = (1<<1), |
| IER_RLSI = (1<<2), |
| IER_MSI = (1<<3), |
| }; |
| |
| enum { |
| IIR_STAT = (1<<0), |
| IIR_ID0 = (1<<1), |
| IIR_ID1 = (1<<2), |
| }; |
| |
| enum { |
| LCR_WLS0 = (1<<0), |
| LCR_WLS1 = (1<<1), |
| LCR_STB = (1<<2), |
| LCR_PEN = (1<<3), |
| LCR_EPS = (1<<4), |
| LCR_SP = (1<<5), |
| LCR_SB = (1<<6), |
| }; |
| |
| enum { |
| MCR_DTR = (1<<0), |
| MCR_RTS = (1<<1), |
| }; |
| |
| enum { |
| LSR_DR = (1<<0), |
| LSR_OE = (1<<1), |
| LSR_PE = (1<<2), |
| LSR_FE = (1<<3), |
| LSR_BI = (1<<4), |
| LSR_THRE = (1<<5), |
| LSR_TEMT = (1<<6), |
| }; |
| |
| enum { |
| MSR_DCTS = (1<<0), |
| MSR_DDSR = (1<<1), |
| MSR_TERI = (1<<2), |
| MSR_DDCD = (1<<3), |
| MSR_CTS = (1<<4), |
| MSR_DSR = (1<<5), |
| MSR_RI = (1<<6), |
| MSR_DCD = (1<<7), |
| }; |
| |
| struct LM32UartState { |
| SysBusDevice busdev; |
| MemoryRegion iomem; |
| CharDriverState *chr; |
| qemu_irq irq; |
| |
| uint32_t regs[R_MAX]; |
| }; |
| typedef struct LM32UartState LM32UartState; |
| |
| static void uart_update_irq(LM32UartState *s) |
| { |
| unsigned int irq; |
| |
| if ((s->regs[R_LSR] & (LSR_OE | LSR_PE | LSR_FE | LSR_BI)) |
| && (s->regs[R_IER] & IER_RLSI)) { |
| irq = 1; |
| s->regs[R_IIR] = IIR_ID1 | IIR_ID0; |
| } else if ((s->regs[R_LSR] & LSR_DR) && (s->regs[R_IER] & IER_RBRI)) { |
| irq = 1; |
| s->regs[R_IIR] = IIR_ID1; |
| } else if ((s->regs[R_LSR] & LSR_THRE) && (s->regs[R_IER] & IER_THRI)) { |
| irq = 1; |
| s->regs[R_IIR] = IIR_ID0; |
| } else if ((s->regs[R_MSR] & 0x0f) && (s->regs[R_IER] & IER_MSI)) { |
| irq = 1; |
| s->regs[R_IIR] = 0; |
| } else { |
| irq = 0; |
| s->regs[R_IIR] = IIR_STAT; |
| } |
| |
| trace_lm32_uart_irq_state(irq); |
| qemu_set_irq(s->irq, irq); |
| } |
| |
| static uint64_t uart_read(void *opaque, hwaddr addr, |
| unsigned size) |
| { |
| LM32UartState *s = opaque; |
| uint32_t r = 0; |
| |
| addr >>= 2; |
| switch (addr) { |
| case R_RXTX: |
| r = s->regs[R_RXTX]; |
| s->regs[R_LSR] &= ~LSR_DR; |
| uart_update_irq(s); |
| qemu_chr_accept_input(s->chr); |
| break; |
| case R_IIR: |
| case R_LSR: |
| case R_MSR: |
| r = s->regs[addr]; |
| break; |
| case R_IER: |
| case R_LCR: |
| case R_MCR: |
| case R_DIV: |
| error_report("lm32_uart: read access to write only register 0x" |
| TARGET_FMT_plx, addr << 2); |
| break; |
| default: |
| error_report("lm32_uart: read access to unknown register 0x" |
| TARGET_FMT_plx, addr << 2); |
| break; |
| } |
| |
| trace_lm32_uart_memory_read(addr << 2, r); |
| return r; |
| } |
| |
| static void uart_write(void *opaque, hwaddr addr, |
| uint64_t value, unsigned size) |
| { |
| LM32UartState *s = opaque; |
| unsigned char ch = value; |
| |
| trace_lm32_uart_memory_write(addr, value); |
| |
| addr >>= 2; |
| switch (addr) { |
| case R_RXTX: |
| if (s->chr) { |
| qemu_chr_fe_write(s->chr, &ch, 1); |
| } |
| break; |
| case R_IER: |
| case R_LCR: |
| case R_MCR: |
| case R_DIV: |
| s->regs[addr] = value; |
| break; |
| case R_IIR: |
| case R_LSR: |
| case R_MSR: |
| error_report("lm32_uart: write access to read only register 0x" |
| TARGET_FMT_plx, addr << 2); |
| break; |
| default: |
| error_report("lm32_uart: write access to unknown register 0x" |
| TARGET_FMT_plx, addr << 2); |
| break; |
| } |
| uart_update_irq(s); |
| } |
| |
| static const MemoryRegionOps uart_ops = { |
| .read = uart_read, |
| .write = uart_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| .valid = { |
| .min_access_size = 4, |
| .max_access_size = 4, |
| }, |
| }; |
| |
| static void uart_rx(void *opaque, const uint8_t *buf, int size) |
| { |
| LM32UartState *s = opaque; |
| |
| if (s->regs[R_LSR] & LSR_DR) { |
| s->regs[R_LSR] |= LSR_OE; |
| } |
| |
| s->regs[R_LSR] |= LSR_DR; |
| s->regs[R_RXTX] = *buf; |
| |
| uart_update_irq(s); |
| } |
| |
| static int uart_can_rx(void *opaque) |
| { |
| LM32UartState *s = opaque; |
| |
| return !(s->regs[R_LSR] & LSR_DR); |
| } |
| |
| static void uart_event(void *opaque, int event) |
| { |
| } |
| |
| static void uart_reset(DeviceState *d) |
| { |
| LM32UartState *s = container_of(d, LM32UartState, busdev.qdev); |
| int i; |
| |
| for (i = 0; i < R_MAX; i++) { |
| s->regs[i] = 0; |
| } |
| |
| /* defaults */ |
| s->regs[R_LSR] = LSR_THRE | LSR_TEMT; |
| } |
| |
| static int lm32_uart_init(SysBusDevice *dev) |
| { |
| LM32UartState *s = FROM_SYSBUS(typeof(*s), dev); |
| |
| sysbus_init_irq(dev, &s->irq); |
| |
| memory_region_init_io(&s->iomem, OBJECT(s), &uart_ops, s, |
| "uart", R_MAX * 4); |
| sysbus_init_mmio(dev, &s->iomem); |
| |
| s->chr = qemu_char_get_next_serial(); |
| if (s->chr) { |
| qemu_chr_add_handlers(s->chr, uart_can_rx, uart_rx, uart_event, s); |
| } |
| |
| return 0; |
| } |
| |
| static const VMStateDescription vmstate_lm32_uart = { |
| .name = "lm32-uart", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .minimum_version_id_old = 1, |
| .fields = (VMStateField[]) { |
| VMSTATE_UINT32_ARRAY(regs, LM32UartState, R_MAX), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static void lm32_uart_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass); |
| |
| k->init = lm32_uart_init; |
| dc->reset = uart_reset; |
| dc->vmsd = &vmstate_lm32_uart; |
| } |
| |
| static const TypeInfo lm32_uart_info = { |
| .name = "lm32-uart", |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(LM32UartState), |
| .class_init = lm32_uart_class_init, |
| }; |
| |
| static void lm32_uart_register_types(void) |
| { |
| type_register_static(&lm32_uart_info); |
| } |
| |
| type_init(lm32_uart_register_types) |