| # -*- Mode: Python -*- |
| # vim: filetype=python |
| |
| ## |
| # == Block core (VM unrelated) |
| ## |
| |
| { 'include': 'common.json' } |
| { 'include': 'crypto.json' } |
| { 'include': 'job.json' } |
| { 'include': 'sockets.json' } |
| |
| ## |
| # @SnapshotInfo: |
| # |
| # @id: unique snapshot id |
| # |
| # @name: user chosen name |
| # |
| # @vm-state-size: size of the VM state |
| # |
| # @date-sec: UTC date of the snapshot in seconds |
| # |
| # @date-nsec: fractional part in nano seconds to be used with date-sec |
| # |
| # @vm-clock-sec: VM clock relative to boot in seconds |
| # |
| # @vm-clock-nsec: fractional part in nano seconds to be used with |
| # vm-clock-sec |
| # |
| # @icount: Current instruction count. Appears when execution |
| # record/replay is enabled. Used for "time-traveling" to match |
| # the moment in the recorded execution with the snapshots. This |
| # counter may be obtained through @query-replay command (since |
| # 5.2) |
| # |
| # Since: 1.3 |
| ## |
| { 'struct': 'SnapshotInfo', |
| 'data': { 'id': 'str', 'name': 'str', 'vm-state-size': 'int', |
| 'date-sec': 'int', 'date-nsec': 'int', |
| 'vm-clock-sec': 'int', 'vm-clock-nsec': 'int', |
| '*icount': 'int' } } |
| |
| ## |
| # @ImageInfoSpecificQCow2EncryptionBase: |
| # |
| # @format: The encryption format |
| # |
| # Since: 2.10 |
| ## |
| { 'struct': 'ImageInfoSpecificQCow2EncryptionBase', |
| 'data': { 'format': 'BlockdevQcow2EncryptionFormat'}} |
| |
| ## |
| # @ImageInfoSpecificQCow2Encryption: |
| # |
| # Since: 2.10 |
| ## |
| { 'union': 'ImageInfoSpecificQCow2Encryption', |
| 'base': 'ImageInfoSpecificQCow2EncryptionBase', |
| 'discriminator': 'format', |
| 'data': { 'luks': 'QCryptoBlockInfoLUKS' } } |
| |
| ## |
| # @ImageInfoSpecificQCow2: |
| # |
| # @compat: compatibility level |
| # |
| # @data-file: the filename of the external data file that is stored in |
| # the image and used as a default for opening the image |
| # (since: 4.0) |
| # |
| # @data-file-raw: True if the external data file must stay valid as a |
| # standalone (read-only) raw image without looking at qcow2 |
| # metadata (since: 4.0) |
| # |
| # @extended-l2: true if the image has extended L2 entries; only valid |
| # for compat >= 1.1 (since 5.2) |
| # |
| # @lazy-refcounts: on or off; only valid for compat >= 1.1 |
| # |
| # @corrupt: true if the image has been marked corrupt; only valid for |
| # compat >= 1.1 (since 2.2) |
| # |
| # @refcount-bits: width of a refcount entry in bits (since 2.3) |
| # |
| # @encrypt: details about encryption parameters; only set if image is |
| # encrypted (since 2.10) |
| # |
| # @bitmaps: A list of qcow2 bitmap details (since 4.0) |
| # |
| # @compression-type: the image cluster compression method (since 5.1) |
| # |
| # Since: 1.7 |
| ## |
| { 'struct': 'ImageInfoSpecificQCow2', |
| 'data': { |
| 'compat': 'str', |
| '*data-file': 'str', |
| '*data-file-raw': 'bool', |
| '*extended-l2': 'bool', |
| '*lazy-refcounts': 'bool', |
| '*corrupt': 'bool', |
| 'refcount-bits': 'int', |
| '*encrypt': 'ImageInfoSpecificQCow2Encryption', |
| '*bitmaps': ['Qcow2BitmapInfo'], |
| 'compression-type': 'Qcow2CompressionType' |
| } } |
| |
| ## |
| # @ImageInfoSpecificVmdk: |
| # |
| # @create-type: The create type of VMDK image |
| # |
| # @cid: Content id of image |
| # |
| # @parent-cid: Parent VMDK image's cid |
| # |
| # @extents: List of extent files |
| # |
| # Since: 1.7 |
| ## |
| { 'struct': 'ImageInfoSpecificVmdk', |
| 'data': { |
| 'create-type': 'str', |
| 'cid': 'int', |
| 'parent-cid': 'int', |
| 'extents': ['VmdkExtentInfo'] |
| } } |
| |
| ## |
| # @VmdkExtentInfo: |
| # |
| # Information about a VMDK extent file |
| # |
| # @filename: Name of the extent file |
| # |
| # @format: Extent type (e.g. FLAT or SPARSE) |
| # |
| # @virtual-size: Number of bytes covered by this extent |
| # |
| # @cluster-size: Cluster size in bytes (for non-flat extents) |
| # |
| # @compressed: Whether this extent contains compressed data |
| # |
| # Since: 8.0 |
| ## |
| { 'struct': 'VmdkExtentInfo', |
| 'data': { |
| 'filename': 'str', |
| 'format': 'str', |
| 'virtual-size': 'int', |
| '*cluster-size': 'int', |
| '*compressed': 'bool' |
| } } |
| |
| ## |
| # @ImageInfoSpecificRbd: |
| # |
| # @encryption-format: Image encryption format |
| # |
| # Since: 6.1 |
| ## |
| { 'struct': 'ImageInfoSpecificRbd', |
| 'data': { |
| '*encryption-format': 'RbdImageEncryptionFormat' |
| } } |
| |
| ## |
| # @ImageInfoSpecificFile: |
| # |
| # @extent-size-hint: Extent size hint (if available) |
| # |
| # Since: 8.0 |
| ## |
| { 'struct': 'ImageInfoSpecificFile', |
| 'data': { |
| '*extent-size-hint': 'size' |
| } } |
| |
| ## |
| # @ImageInfoSpecificKind: |
| # |
| # @luks: Since 2.7 |
| # |
| # @rbd: Since 6.1 |
| # |
| # @file: Since 8.0 |
| # |
| # Since: 1.7 |
| ## |
| { 'enum': 'ImageInfoSpecificKind', |
| 'data': [ 'qcow2', 'vmdk', 'luks', 'rbd', 'file' ] } |
| |
| ## |
| # @ImageInfoSpecificQCow2Wrapper: |
| # |
| # @data: image information specific to QCOW2 |
| # |
| # Since: 1.7 |
| ## |
| { 'struct': 'ImageInfoSpecificQCow2Wrapper', |
| 'data': { 'data': 'ImageInfoSpecificQCow2' } } |
| |
| ## |
| # @ImageInfoSpecificVmdkWrapper: |
| # |
| # @data: image information specific to VMDK |
| # |
| # Since: 6.1 |
| ## |
| { 'struct': 'ImageInfoSpecificVmdkWrapper', |
| 'data': { 'data': 'ImageInfoSpecificVmdk' } } |
| |
| ## |
| # @ImageInfoSpecificLUKSWrapper: |
| # |
| # @data: image information specific to LUKS |
| # |
| # Since: 2.7 |
| ## |
| { 'struct': 'ImageInfoSpecificLUKSWrapper', |
| 'data': { 'data': 'QCryptoBlockInfoLUKS' } } |
| # If we need to add block driver specific parameters for |
| # LUKS in future, then we'll subclass QCryptoBlockInfoLUKS |
| # to define a ImageInfoSpecificLUKS |
| |
| ## |
| # @ImageInfoSpecificRbdWrapper: |
| # |
| # @data: image information specific to RBD |
| # |
| # Since: 6.1 |
| ## |
| { 'struct': 'ImageInfoSpecificRbdWrapper', |
| 'data': { 'data': 'ImageInfoSpecificRbd' } } |
| |
| ## |
| # @ImageInfoSpecificFileWrapper: |
| # |
| # @data: image information specific to files |
| # |
| # Since: 8.0 |
| ## |
| { 'struct': 'ImageInfoSpecificFileWrapper', |
| 'data': { 'data': 'ImageInfoSpecificFile' } } |
| |
| ## |
| # @ImageInfoSpecific: |
| # |
| # A discriminated record of image format specific information |
| # structures. |
| # |
| # @type: block driver name |
| # |
| # Since: 1.7 |
| ## |
| { 'union': 'ImageInfoSpecific', |
| 'base': { 'type': 'ImageInfoSpecificKind' }, |
| 'discriminator': 'type', |
| 'data': { |
| 'qcow2': 'ImageInfoSpecificQCow2Wrapper', |
| 'vmdk': 'ImageInfoSpecificVmdkWrapper', |
| 'luks': 'ImageInfoSpecificLUKSWrapper', |
| 'rbd': 'ImageInfoSpecificRbdWrapper', |
| 'file': 'ImageInfoSpecificFileWrapper' |
| } } |
| |
| ## |
| # @BlockNodeInfo: |
| # |
| # Information about a QEMU image file |
| # |
| # @filename: name of the image file |
| # |
| # @format: format of the image file |
| # |
| # @virtual-size: maximum capacity in bytes of the image |
| # |
| # @actual-size: actual size on disk in bytes of the image |
| # |
| # @dirty-flag: true if image is not cleanly closed |
| # |
| # @cluster-size: size of a cluster in bytes |
| # |
| # @encrypted: true if the image is encrypted |
| # |
| # @compressed: true if the image is compressed (Since 1.7) |
| # |
| # @backing-filename: name of the backing file |
| # |
| # @full-backing-filename: full path of the backing file |
| # |
| # @backing-filename-format: the format of the backing file |
| # |
| # @snapshots: list of VM snapshots |
| # |
| # @format-specific: structure supplying additional format-specific |
| # information (since 1.7) |
| # |
| # Since: 8.0 |
| ## |
| { 'struct': 'BlockNodeInfo', |
| 'data': {'filename': 'str', 'format': 'str', '*dirty-flag': 'bool', |
| '*actual-size': 'int', 'virtual-size': 'int', |
| '*cluster-size': 'int', '*encrypted': 'bool', '*compressed': 'bool', |
| '*backing-filename': 'str', '*full-backing-filename': 'str', |
| '*backing-filename-format': 'str', '*snapshots': ['SnapshotInfo'], |
| '*format-specific': 'ImageInfoSpecific' } } |
| |
| ## |
| # @ImageInfo: |
| # |
| # Information about a QEMU image file, and potentially its backing |
| # image |
| # |
| # @backing-image: info of the backing image |
| # |
| # Since: 1.3 |
| ## |
| { 'struct': 'ImageInfo', |
| 'base': 'BlockNodeInfo', |
| 'data': { |
| '*backing-image': 'ImageInfo' |
| } } |
| |
| ## |
| # @BlockChildInfo: |
| # |
| # Information about all nodes in the block graph starting at some |
| # node, annotated with information about that node in relation to its |
| # parent. |
| # |
| # @name: Child name of the root node in the BlockGraphInfo struct, in |
| # its role as the child of some undescribed parent node |
| # |
| # @info: Block graph information starting at this node |
| # |
| # Since: 8.0 |
| ## |
| { 'struct': 'BlockChildInfo', |
| 'data': { |
| 'name': 'str', |
| 'info': 'BlockGraphInfo' |
| } } |
| |
| ## |
| # @BlockGraphInfo: |
| # |
| # Information about all nodes in a block (sub)graph in the form of |
| # BlockNodeInfo data. The base BlockNodeInfo struct contains the |
| # information for the (sub)graph's root node. |
| # |
| # @children: Array of links to this node's child nodes' information |
| # |
| # Since: 8.0 |
| ## |
| { 'struct': 'BlockGraphInfo', |
| 'base': 'BlockNodeInfo', |
| 'data': { 'children': ['BlockChildInfo'] } } |
| |
| ## |
| # @ImageCheck: |
| # |
| # Information about a QEMU image file check |
| # |
| # @filename: name of the image file checked |
| # |
| # @format: format of the image file checked |
| # |
| # @check-errors: number of unexpected errors occurred during check |
| # |
| # @image-end-offset: offset (in bytes) where the image ends, this |
| # field is present if the driver for the image format supports it |
| # |
| # @corruptions: number of corruptions found during the check if any |
| # |
| # @leaks: number of leaks found during the check if any |
| # |
| # @corruptions-fixed: number of corruptions fixed during the check if |
| # any |
| # |
| # @leaks-fixed: number of leaks fixed during the check if any |
| # |
| # @total-clusters: total number of clusters, this field is present if |
| # the driver for the image format supports it |
| # |
| # @allocated-clusters: total number of allocated clusters, this field |
| # is present if the driver for the image format supports it |
| # |
| # @fragmented-clusters: total number of fragmented clusters, this |
| # field is present if the driver for the image format supports it |
| # |
| # @compressed-clusters: total number of compressed clusters, this |
| # field is present if the driver for the image format supports it |
| # |
| # Since: 1.4 |
| ## |
| { 'struct': 'ImageCheck', |
| 'data': {'filename': 'str', 'format': 'str', 'check-errors': 'int', |
| '*image-end-offset': 'int', '*corruptions': 'int', '*leaks': 'int', |
| '*corruptions-fixed': 'int', '*leaks-fixed': 'int', |
| '*total-clusters': 'int', '*allocated-clusters': 'int', |
| '*fragmented-clusters': 'int', '*compressed-clusters': 'int' } } |
| |
| ## |
| # @MapEntry: |
| # |
| # Mapping information from a virtual block range to a host file range |
| # |
| # @start: virtual (guest) offset of the first byte described by this |
| # entry |
| # |
| # @length: the number of bytes of the mapped virtual range |
| # |
| # @data: reading the image will actually read data from a file (in |
| # particular, if @offset is present this means that the sectors |
| # are not simply preallocated, but contain actual data in raw |
| # format) |
| # |
| # @zero: whether the virtual blocks read as zeroes |
| # |
| # @compressed: true if the data is stored compressed (since 8.2) |
| # |
| # @depth: number of layers (0 = top image, 1 = top image's backing |
| # file, ..., n - 1 = bottom image (where n is the number of images |
| # in the chain)) before reaching one for which the range is |
| # allocated |
| # |
| # @present: true if this layer provides the data, false if adding a |
| # backing layer could impact this region (since 6.1) |
| # |
| # @offset: if present, the image file stores the data for this range |
| # in raw format at the given (host) offset |
| # |
| # @filename: filename that is referred to by @offset |
| # |
| # Since: 2.6 |
| ## |
| { 'struct': 'MapEntry', |
| 'data': {'start': 'int', 'length': 'int', 'data': 'bool', |
| 'zero': 'bool', 'compressed': 'bool', 'depth': 'int', |
| 'present': 'bool', '*offset': 'int', '*filename': 'str' } } |
| |
| ## |
| # @BlockdevCacheInfo: |
| # |
| # Cache mode information for a block device |
| # |
| # @writeback: true if writeback mode is enabled |
| # |
| # @direct: true if the host page cache is bypassed (O_DIRECT) |
| # |
| # @no-flush: true if flush requests are ignored for the device |
| # |
| # Since: 2.3 |
| ## |
| { 'struct': 'BlockdevCacheInfo', |
| 'data': { 'writeback': 'bool', |
| 'direct': 'bool', |
| 'no-flush': 'bool' } } |
| |
| ## |
| # @BlockDeviceInfo: |
| # |
| # Information about the backing device for a block device. |
| # |
| # @file: the filename of the backing device |
| # |
| # @node-name: the name of the block driver node (Since 2.0) |
| # |
| # @ro: true if the backing device was open read-only |
| # |
| # @drv: the name of the block format used to open the backing device. |
| # As of 0.14 this can be: 'blkdebug', 'bochs', 'cloop', 'cow', |
| # 'dmg', 'file', 'file', 'ftp', 'ftps', 'host_cdrom', |
| # 'host_device', 'http', 'https', 'luks', 'nbd', 'parallels', |
| # 'qcow', 'qcow2', 'raw', 'vdi', 'vmdk', 'vpc', 'vvfat' 2.2: |
| # 'archipelago' added, 'cow' dropped 2.3: 'host_floppy' deprecated |
| # 2.5: 'host_floppy' dropped 2.6: 'luks' added 2.8: 'replication' |
| # added, 'tftp' dropped 2.9: 'archipelago' dropped |
| # |
| # @backing_file: the name of the backing file (for copy-on-write) |
| # |
| # @backing_file_depth: number of files in the backing file chain |
| # (since: 1.2) |
| # |
| # @encrypted: true if the backing device is encrypted |
| # |
| # @detect_zeroes: detect and optimize zero writes (Since 2.1) |
| # |
| # @bps: total throughput limit in bytes per second is specified |
| # |
| # @bps_rd: read throughput limit in bytes per second is specified |
| # |
| # @bps_wr: write throughput limit in bytes per second is specified |
| # |
| # @iops: total I/O operations per second is specified |
| # |
| # @iops_rd: read I/O operations per second is specified |
| # |
| # @iops_wr: write I/O operations per second is specified |
| # |
| # @image: the info of image used (since: 1.6) |
| # |
| # @bps_max: total throughput limit during bursts, in bytes (Since 1.7) |
| # |
| # @bps_rd_max: read throughput limit during bursts, in bytes (Since |
| # 1.7) |
| # |
| # @bps_wr_max: write throughput limit during bursts, in bytes (Since |
| # 1.7) |
| # |
| # @iops_max: total I/O operations per second during bursts, in bytes |
| # (Since 1.7) |
| # |
| # @iops_rd_max: read I/O operations per second during bursts, in bytes |
| # (Since 1.7) |
| # |
| # @iops_wr_max: write I/O operations per second during bursts, in |
| # bytes (Since 1.7) |
| # |
| # @bps_max_length: maximum length of the @bps_max burst period, in |
| # seconds. (Since 2.6) |
| # |
| # @bps_rd_max_length: maximum length of the @bps_rd_max burst period, |
| # in seconds. (Since 2.6) |
| # |
| # @bps_wr_max_length: maximum length of the @bps_wr_max burst period, |
| # in seconds. (Since 2.6) |
| # |
| # @iops_max_length: maximum length of the @iops burst period, in |
| # seconds. (Since 2.6) |
| # |
| # @iops_rd_max_length: maximum length of the @iops_rd_max burst |
| # period, in seconds. (Since 2.6) |
| # |
| # @iops_wr_max_length: maximum length of the @iops_wr_max burst |
| # period, in seconds. (Since 2.6) |
| # |
| # @iops_size: an I/O size in bytes (Since 1.7) |
| # |
| # @group: throttle group name (Since 2.4) |
| # |
| # @cache: the cache mode used for the block device (since: 2.3) |
| # |
| # @write_threshold: configured write threshold for the device. 0 if |
| # disabled. (Since 2.3) |
| # |
| # @dirty-bitmaps: dirty bitmaps information (only present if node has |
| # one or more dirty bitmaps) (Since 4.2) |
| # |
| # Since: 0.14 |
| ## |
| { 'struct': 'BlockDeviceInfo', |
| 'data': { 'file': 'str', '*node-name': 'str', 'ro': 'bool', 'drv': 'str', |
| '*backing_file': 'str', 'backing_file_depth': 'int', |
| 'encrypted': 'bool', |
| 'detect_zeroes': 'BlockdevDetectZeroesOptions', |
| 'bps': 'int', 'bps_rd': 'int', 'bps_wr': 'int', |
| 'iops': 'int', 'iops_rd': 'int', 'iops_wr': 'int', |
| 'image': 'ImageInfo', |
| '*bps_max': 'int', '*bps_rd_max': 'int', |
| '*bps_wr_max': 'int', '*iops_max': 'int', |
| '*iops_rd_max': 'int', '*iops_wr_max': 'int', |
| '*bps_max_length': 'int', '*bps_rd_max_length': 'int', |
| '*bps_wr_max_length': 'int', '*iops_max_length': 'int', |
| '*iops_rd_max_length': 'int', '*iops_wr_max_length': 'int', |
| '*iops_size': 'int', '*group': 'str', 'cache': 'BlockdevCacheInfo', |
| 'write_threshold': 'int', '*dirty-bitmaps': ['BlockDirtyInfo'] } } |
| |
| ## |
| # @BlockDeviceIoStatus: |
| # |
| # An enumeration of block device I/O status. |
| # |
| # @ok: The last I/O operation has succeeded |
| # |
| # @failed: The last I/O operation has failed |
| # |
| # @nospace: The last I/O operation has failed due to a no-space |
| # condition |
| # |
| # Since: 1.0 |
| ## |
| { 'enum': 'BlockDeviceIoStatus', 'data': [ 'ok', 'failed', 'nospace' ] } |
| |
| ## |
| # @BlockDirtyInfo: |
| # |
| # Block dirty bitmap information. |
| # |
| # @name: the name of the dirty bitmap (Since 2.4) |
| # |
| # @count: number of dirty bytes according to the dirty bitmap |
| # |
| # @granularity: granularity of the dirty bitmap in bytes (since 1.4) |
| # |
| # @recording: true if the bitmap is recording new writes from the |
| # guest. (since 4.0) |
| # |
| # @busy: true if the bitmap is in-use by some operation (NBD or jobs) |
| # and cannot be modified via QMP or used by another operation. |
| # (since 4.0) |
| # |
| # @persistent: true if the bitmap was stored on disk, is scheduled to |
| # be stored on disk, or both. (since 4.0) |
| # |
| # @inconsistent: true if this is a persistent bitmap that was |
| # improperly stored. Implies @persistent to be true; @recording |
| # and @busy to be false. This bitmap cannot be used. To remove |
| # it, use @block-dirty-bitmap-remove. (Since 4.0) |
| # |
| # Since: 1.3 |
| ## |
| { 'struct': 'BlockDirtyInfo', |
| 'data': {'*name': 'str', 'count': 'int', 'granularity': 'uint32', |
| 'recording': 'bool', 'busy': 'bool', |
| 'persistent': 'bool', '*inconsistent': 'bool' } } |
| |
| ## |
| # @Qcow2BitmapInfoFlags: |
| # |
| # An enumeration of flags that a bitmap can report to the user. |
| # |
| # @in-use: This flag is set by any process actively modifying the |
| # qcow2 file, and cleared when the updated bitmap is flushed to |
| # the qcow2 image. The presence of this flag in an offline image |
| # means that the bitmap was not saved correctly after its last |
| # usage, and may contain inconsistent data. |
| # |
| # @auto: The bitmap must reflect all changes of the virtual disk by |
| # any application that would write to this qcow2 file. |
| # |
| # Since: 4.0 |
| ## |
| { 'enum': 'Qcow2BitmapInfoFlags', |
| 'data': ['in-use', 'auto'] } |
| |
| ## |
| # @Qcow2BitmapInfo: |
| # |
| # Qcow2 bitmap information. |
| # |
| # @name: the name of the bitmap |
| # |
| # @granularity: granularity of the bitmap in bytes |
| # |
| # @flags: flags of the bitmap |
| # |
| # Since: 4.0 |
| ## |
| { 'struct': 'Qcow2BitmapInfo', |
| 'data': {'name': 'str', 'granularity': 'uint32', |
| 'flags': ['Qcow2BitmapInfoFlags'] } } |
| |
| ## |
| # @BlockLatencyHistogramInfo: |
| # |
| # Block latency histogram. |
| # |
| # @boundaries: list of interval boundary values in nanoseconds, all |
| # greater than zero and in ascending order. For example, the list |
| # [10, 50, 100] produces the following histogram intervals: [0, |
| # 10), [10, 50), [50, 100), [100, +inf). |
| # |
| # @bins: list of io request counts corresponding to histogram |
| # intervals, one more element than @boundaries has. For the |
| # example above, @bins may be something like [3, 1, 5, 2], and |
| # corresponding histogram looks like:: |
| # |
| # 5| * |
| # 4| * |
| # 3| * * |
| # 2| * * * |
| # 1| * * * * |
| # +------------------ |
| # 10 50 100 |
| # |
| # Since: 4.0 |
| ## |
| { 'struct': 'BlockLatencyHistogramInfo', |
| 'data': {'boundaries': ['uint64'], 'bins': ['uint64'] } } |
| |
| ## |
| # @BlockInfo: |
| # |
| # Block device information. This structure describes a virtual device |
| # and the backing device associated with it. |
| # |
| # @device: The device name associated with the virtual device. |
| # |
| # @qdev: The qdev ID, or if no ID is assigned, the QOM path of the |
| # block device. (since 2.10) |
| # |
| # @type: This field is returned only for compatibility reasons, it |
| # should not be used (always returns 'unknown') |
| # |
| # @removable: True if the device supports removable media. |
| # |
| # @locked: True if the guest has locked this device from having its |
| # media removed |
| # |
| # @tray_open: True if the device's tray is open (only present if it |
| # has a tray) |
| # |
| # @io-status: @BlockDeviceIoStatus. Only present if the device |
| # supports it and the VM is configured to stop on errors |
| # (supported device models: virtio-blk, IDE, SCSI except |
| # scsi-generic) |
| # |
| # @inserted: @BlockDeviceInfo describing the device if media is |
| # present |
| # |
| # Since: 0.14 |
| ## |
| { 'struct': 'BlockInfo', |
| 'data': {'device': 'str', '*qdev': 'str', 'type': 'str', 'removable': 'bool', |
| 'locked': 'bool', '*inserted': 'BlockDeviceInfo', |
| '*tray_open': 'bool', '*io-status': 'BlockDeviceIoStatus' } } |
| |
| ## |
| # @BlockMeasureInfo: |
| # |
| # Image file size calculation information. This structure describes |
| # the size requirements for creating a new image file. |
| # |
| # The size requirements depend on the new image file format. File |
| # size always equals virtual disk size for the 'raw' format, even for |
| # sparse POSIX files. Compact formats such as 'qcow2' represent |
| # unallocated and zero regions efficiently so file size may be smaller |
| # than virtual disk size. |
| # |
| # The values are upper bounds that are guaranteed to fit the new image |
| # file. Subsequent modification, such as internal snapshot or further |
| # bitmap creation, may require additional space and is not covered |
| # here. |
| # |
| # @required: Size required for a new image file, in bytes, when |
| # copying just allocated guest-visible contents. |
| # |
| # @fully-allocated: Image file size, in bytes, once data has been |
| # written to all sectors, when copying just guest-visible |
| # contents. |
| # |
| # @bitmaps: Additional size required if all the top-level bitmap |
| # metadata in the source image were to be copied to the |
| # destination, present only when source and destination both |
| # support persistent bitmaps. (since 5.1) |
| # |
| # Since: 2.10 |
| ## |
| { 'struct': 'BlockMeasureInfo', |
| 'data': {'required': 'int', 'fully-allocated': 'int', '*bitmaps': 'int'} } |
| |
| ## |
| # @query-block: |
| # |
| # Get a list of BlockInfo for all virtual block devices. |
| # |
| # Returns: a list of @BlockInfo describing each virtual block device. |
| # Filter nodes that were created implicitly are skipped over. |
| # |
| # Since: 0.14 |
| # |
| # .. qmp-example:: |
| # |
| # -> { "execute": "query-block" } |
| # <- { |
| # "return":[ |
| # { |
| # "io-status": "ok", |
| # "device":"ide0-hd0", |
| # "locked":false, |
| # "removable":false, |
| # "inserted":{ |
| # "ro":false, |
| # "drv":"qcow2", |
| # "encrypted":false, |
| # "file":"disks/test.qcow2", |
| # "backing_file_depth":1, |
| # "bps":1000000, |
| # "bps_rd":0, |
| # "bps_wr":0, |
| # "iops":1000000, |
| # "iops_rd":0, |
| # "iops_wr":0, |
| # "bps_max": 8000000, |
| # "bps_rd_max": 0, |
| # "bps_wr_max": 0, |
| # "iops_max": 0, |
| # "iops_rd_max": 0, |
| # "iops_wr_max": 0, |
| # "iops_size": 0, |
| # "detect_zeroes": "on", |
| # "write_threshold": 0, |
| # "image":{ |
| # "filename":"disks/test.qcow2", |
| # "format":"qcow2", |
| # "virtual-size":2048000, |
| # "backing_file":"base.qcow2", |
| # "full-backing-filename":"disks/base.qcow2", |
| # "backing-filename-format":"qcow2", |
| # "snapshots":[ |
| # { |
| # "id": "1", |
| # "name": "snapshot1", |
| # "vm-state-size": 0, |
| # "date-sec": 10000200, |
| # "date-nsec": 12, |
| # "vm-clock-sec": 206, |
| # "vm-clock-nsec": 30 |
| # } |
| # ], |
| # "backing-image":{ |
| # "filename":"disks/base.qcow2", |
| # "format":"qcow2", |
| # "virtual-size":2048000 |
| # } |
| # } |
| # }, |
| # "qdev": "ide_disk", |
| # "type":"unknown" |
| # }, |
| # { |
| # "io-status": "ok", |
| # "device":"ide1-cd0", |
| # "locked":false, |
| # "removable":true, |
| # "qdev": "/machine/unattached/device[23]", |
| # "tray_open": false, |
| # "type":"unknown" |
| # }, |
| # { |
| # "device":"floppy0", |
| # "locked":false, |
| # "removable":true, |
| # "qdev": "/machine/unattached/device[20]", |
| # "type":"unknown" |
| # }, |
| # { |
| # "device":"sd0", |
| # "locked":false, |
| # "removable":true, |
| # "type":"unknown" |
| # } |
| # ] |
| # } |
| ## |
| { 'command': 'query-block', 'returns': ['BlockInfo'], |
| 'allow-preconfig': true } |
| |
| ## |
| # @BlockDeviceTimedStats: |
| # |
| # Statistics of a block device during a given interval of time. |
| # |
| # @interval_length: Interval used for calculating the statistics, in |
| # seconds. |
| # |
| # @min_rd_latency_ns: Minimum latency of read operations in the |
| # defined interval, in nanoseconds. |
| # |
| # @min_wr_latency_ns: Minimum latency of write operations in the |
| # defined interval, in nanoseconds. |
| # |
| # @min_zone_append_latency_ns: Minimum latency of zone append |
| # operations in the defined interval, in nanoseconds (since 8.1) |
| # |
| # @min_flush_latency_ns: Minimum latency of flush operations in the |
| # defined interval, in nanoseconds. |
| # |
| # @max_rd_latency_ns: Maximum latency of read operations in the |
| # defined interval, in nanoseconds. |
| # |
| # @max_wr_latency_ns: Maximum latency of write operations in the |
| # defined interval, in nanoseconds. |
| # |
| # @max_zone_append_latency_ns: Maximum latency of zone append |
| # operations in the defined interval, in nanoseconds (since 8.1) |
| # |
| # @max_flush_latency_ns: Maximum latency of flush operations in the |
| # defined interval, in nanoseconds. |
| # |
| # @avg_rd_latency_ns: Average latency of read operations in the |
| # defined interval, in nanoseconds. |
| # |
| # @avg_wr_latency_ns: Average latency of write operations in the |
| # defined interval, in nanoseconds. |
| # |
| # @avg_zone_append_latency_ns: Average latency of zone append |
| # operations in the defined interval, in nanoseconds (since 8.1) |
| # |
| # @avg_flush_latency_ns: Average latency of flush operations in the |
| # defined interval, in nanoseconds. |
| # |
| # @avg_rd_queue_depth: Average number of pending read operations in |
| # the defined interval. |
| # |
| # @avg_wr_queue_depth: Average number of pending write operations in |
| # the defined interval. |
| # |
| # @avg_zone_append_queue_depth: Average number of pending zone append |
| # operations in the defined interval (since 8.1). |
| # |
| # Since: 2.5 |
| ## |
| { 'struct': 'BlockDeviceTimedStats', |
| 'data': { 'interval_length': 'int', 'min_rd_latency_ns': 'int', |
| 'max_rd_latency_ns': 'int', 'avg_rd_latency_ns': 'int', |
| 'min_wr_latency_ns': 'int', 'max_wr_latency_ns': 'int', |
| 'avg_wr_latency_ns': 'int', 'min_zone_append_latency_ns': 'int', |
| 'max_zone_append_latency_ns': 'int', |
| 'avg_zone_append_latency_ns': 'int', |
| 'min_flush_latency_ns': 'int', 'max_flush_latency_ns': 'int', |
| 'avg_flush_latency_ns': 'int', 'avg_rd_queue_depth': 'number', |
| 'avg_wr_queue_depth': 'number', |
| 'avg_zone_append_queue_depth': 'number' } } |
| |
| ## |
| # @BlockDeviceStats: |
| # |
| # Statistics of a virtual block device or a block backing device. |
| # |
| # @rd_bytes: The number of bytes read by the device. |
| # |
| # @wr_bytes: The number of bytes written by the device. |
| # |
| # @zone_append_bytes: The number of bytes appended by the zoned |
| # devices (since 8.1) |
| # |
| # @unmap_bytes: The number of bytes unmapped by the device (Since 4.2) |
| # |
| # @rd_operations: The number of read operations performed by the |
| # device. |
| # |
| # @wr_operations: The number of write operations performed by the |
| # device. |
| # |
| # @zone_append_operations: The number of zone append operations |
| # performed by the zoned devices (since 8.1) |
| # |
| # @flush_operations: The number of cache flush operations performed by |
| # the device (since 0.15) |
| # |
| # @unmap_operations: The number of unmap operations performed by the |
| # device (Since 4.2) |
| # |
| # @rd_total_time_ns: Total time spent on reads in nanoseconds (since |
| # 0.15). |
| # |
| # @wr_total_time_ns: Total time spent on writes in nanoseconds (since |
| # 0.15). |
| # |
| # @zone_append_total_time_ns: Total time spent on zone append writes |
| # in nanoseconds (since 8.1) |
| # |
| # @flush_total_time_ns: Total time spent on cache flushes in |
| # nanoseconds (since 0.15). |
| # |
| # @unmap_total_time_ns: Total time spent on unmap operations in |
| # nanoseconds (Since 4.2) |
| # |
| # @wr_highest_offset: The offset after the greatest byte written to |
| # the device. The intended use of this information is for |
| # growable sparse files (like qcow2) that are used on top of a |
| # physical device. |
| # |
| # @rd_merged: Number of read requests that have been merged into |
| # another request (Since 2.3). |
| # |
| # @wr_merged: Number of write requests that have been merged into |
| # another request (Since 2.3). |
| # |
| # @zone_append_merged: Number of zone append requests that have been |
| # merged into another request (since 8.1) |
| # |
| # @unmap_merged: Number of unmap requests that have been merged into |
| # another request (Since 4.2) |
| # |
| # @idle_time_ns: Time since the last I/O operation, in nanoseconds. |
| # If the field is absent it means that there haven't been any |
| # operations yet (Since 2.5). |
| # |
| # @failed_rd_operations: The number of failed read operations |
| # performed by the device (Since 2.5) |
| # |
| # @failed_wr_operations: The number of failed write operations |
| # performed by the device (Since 2.5) |
| # |
| # @failed_zone_append_operations: The number of failed zone append |
| # write operations performed by the zoned devices (since 8.1) |
| # |
| # @failed_flush_operations: The number of failed flush operations |
| # performed by the device (Since 2.5) |
| # |
| # @failed_unmap_operations: The number of failed unmap operations |
| # performed by the device (Since 4.2) |
| # |
| # @invalid_rd_operations: The number of invalid read operations |
| # performed by the device (Since 2.5) |
| # |
| # @invalid_wr_operations: The number of invalid write operations |
| # performed by the device (Since 2.5) |
| # |
| # @invalid_zone_append_operations: The number of invalid zone append |
| # operations performed by the zoned device (since 8.1) |
| # |
| # @invalid_flush_operations: The number of invalid flush operations |
| # performed by the device (Since 2.5) |
| # |
| # @invalid_unmap_operations: The number of invalid unmap operations |
| # performed by the device (Since 4.2) |
| # |
| # @account_invalid: Whether invalid operations are included in the |
| # last access statistics (Since 2.5) |
| # |
| # @account_failed: Whether failed operations are included in the |
| # latency and last access statistics (Since 2.5) |
| # |
| # @timed_stats: Statistics specific to the set of previously defined |
| # intervals of time (Since 2.5) |
| # |
| # @rd_latency_histogram: @BlockLatencyHistogramInfo. (Since 4.0) |
| # |
| # @wr_latency_histogram: @BlockLatencyHistogramInfo. (Since 4.0) |
| # |
| # @zone_append_latency_histogram: @BlockLatencyHistogramInfo. |
| # (since 8.1) |
| # |
| # @flush_latency_histogram: @BlockLatencyHistogramInfo. (Since 4.0) |
| # |
| # Since: 0.14 |
| ## |
| { 'struct': 'BlockDeviceStats', |
| 'data': {'rd_bytes': 'int', 'wr_bytes': 'int', 'zone_append_bytes': 'int', |
| 'unmap_bytes' : 'int', 'rd_operations': 'int', |
| 'wr_operations': 'int', 'zone_append_operations': 'int', |
| 'flush_operations': 'int', 'unmap_operations': 'int', |
| 'rd_total_time_ns': 'int', 'wr_total_time_ns': 'int', |
| 'zone_append_total_time_ns': 'int', 'flush_total_time_ns': 'int', |
| 'unmap_total_time_ns': 'int', 'wr_highest_offset': 'int', |
| 'rd_merged': 'int', 'wr_merged': 'int', 'zone_append_merged': 'int', |
| 'unmap_merged': 'int', '*idle_time_ns': 'int', |
| 'failed_rd_operations': 'int', 'failed_wr_operations': 'int', |
| 'failed_zone_append_operations': 'int', |
| 'failed_flush_operations': 'int', |
| 'failed_unmap_operations': 'int', 'invalid_rd_operations': 'int', |
| 'invalid_wr_operations': 'int', |
| 'invalid_zone_append_operations': 'int', |
| 'invalid_flush_operations': 'int', 'invalid_unmap_operations': 'int', |
| 'account_invalid': 'bool', 'account_failed': 'bool', |
| 'timed_stats': ['BlockDeviceTimedStats'], |
| '*rd_latency_histogram': 'BlockLatencyHistogramInfo', |
| '*wr_latency_histogram': 'BlockLatencyHistogramInfo', |
| '*zone_append_latency_histogram': 'BlockLatencyHistogramInfo', |
| '*flush_latency_histogram': 'BlockLatencyHistogramInfo' } } |
| |
| ## |
| # @BlockStatsSpecificFile: |
| # |
| # File driver statistics |
| # |
| # @discard-nb-ok: The number of successful discard operations |
| # performed by the driver. |
| # |
| # @discard-nb-failed: The number of failed discard operations |
| # performed by the driver. |
| # |
| # @discard-bytes-ok: The number of bytes discarded by the driver. |
| # |
| # Since: 4.2 |
| ## |
| { 'struct': 'BlockStatsSpecificFile', |
| 'data': { |
| 'discard-nb-ok': 'uint64', |
| 'discard-nb-failed': 'uint64', |
| 'discard-bytes-ok': 'uint64' } } |
| |
| ## |
| # @BlockStatsSpecificNvme: |
| # |
| # NVMe driver statistics |
| # |
| # @completion-errors: The number of completion errors. |
| # |
| # @aligned-accesses: The number of aligned accesses performed by the |
| # driver. |
| # |
| # @unaligned-accesses: The number of unaligned accesses performed by |
| # the driver. |
| # |
| # Since: 5.2 |
| ## |
| { 'struct': 'BlockStatsSpecificNvme', |
| 'data': { |
| 'completion-errors': 'uint64', |
| 'aligned-accesses': 'uint64', |
| 'unaligned-accesses': 'uint64' } } |
| |
| ## |
| # @BlockStatsSpecific: |
| # |
| # Block driver specific statistics |
| # |
| # @driver: block driver name |
| # |
| # Since: 4.2 |
| ## |
| { 'union': 'BlockStatsSpecific', |
| 'base': { 'driver': 'BlockdevDriver' }, |
| 'discriminator': 'driver', |
| 'data': { |
| 'file': 'BlockStatsSpecificFile', |
| 'host_device': { 'type': 'BlockStatsSpecificFile', |
| 'if': 'HAVE_HOST_BLOCK_DEVICE' }, |
| 'nvme': 'BlockStatsSpecificNvme' } } |
| |
| ## |
| # @BlockStats: |
| # |
| # Statistics of a virtual block device or a block backing device. |
| # |
| # @device: If the stats are for a virtual block device, the name |
| # corresponding to the virtual block device. |
| # |
| # @node-name: The node name of the device. (Since 2.3) |
| # |
| # @qdev: The qdev ID, or if no ID is assigned, the QOM path of the |
| # block device. (since 3.0) |
| # |
| # @stats: A @BlockDeviceStats for the device. |
| # |
| # @driver-specific: Optional driver-specific stats. (Since 4.2) |
| # |
| # @parent: This describes the file block device if it has one. |
| # Contains recursively the statistics of the underlying protocol |
| # (e.g. the host file for a qcow2 image). If there is no |
| # underlying protocol, this field is omitted |
| # |
| # @backing: This describes the backing block device if it has one. |
| # (Since 2.0) |
| # |
| # Since: 0.14 |
| ## |
| { 'struct': 'BlockStats', |
| 'data': {'*device': 'str', '*qdev': 'str', '*node-name': 'str', |
| 'stats': 'BlockDeviceStats', |
| '*driver-specific': 'BlockStatsSpecific', |
| '*parent': 'BlockStats', |
| '*backing': 'BlockStats'} } |
| |
| ## |
| # @query-blockstats: |
| # |
| # Query the @BlockStats for all virtual block devices. |
| # |
| # @query-nodes: If true, the command will query all the block nodes |
| # that have a node name, in a list which will include "parent" |
| # information, but not "backing". If false or omitted, the |
| # behavior is as before - query all the device backends, |
| # recursively including their "parent" and "backing". Filter |
| # nodes that were created implicitly are skipped over in this |
| # mode. (Since 2.3) |
| # |
| # Returns: A list of @BlockStats for each virtual block devices. |
| # |
| # Since: 0.14 |
| # |
| # .. qmp-example:: |
| # |
| # -> { "execute": "query-blockstats" } |
| # <- { |
| # "return":[ |
| # { |
| # "device":"ide0-hd0", |
| # "parent":{ |
| # "stats":{ |
| # "wr_highest_offset":3686448128, |
| # "wr_bytes":9786368, |
| # "wr_operations":751, |
| # "rd_bytes":122567168, |
| # "rd_operations":36772 |
| # "wr_total_times_ns":313253456 |
| # "rd_total_times_ns":3465673657 |
| # "flush_total_times_ns":49653 |
| # "flush_operations":61, |
| # "rd_merged":0, |
| # "wr_merged":0, |
| # "idle_time_ns":2953431879, |
| # "account_invalid":true, |
| # "account_failed":false |
| # } |
| # }, |
| # "stats":{ |
| # "wr_highest_offset":2821110784, |
| # "wr_bytes":9786368, |
| # "wr_operations":692, |
| # "rd_bytes":122739200, |
| # "rd_operations":36604 |
| # "flush_operations":51, |
| # "wr_total_times_ns":313253456 |
| # "rd_total_times_ns":3465673657 |
| # "flush_total_times_ns":49653, |
| # "rd_merged":0, |
| # "wr_merged":0, |
| # "idle_time_ns":2953431879, |
| # "account_invalid":true, |
| # "account_failed":false |
| # }, |
| # "qdev": "/machine/unattached/device[23]" |
| # }, |
| # { |
| # "device":"ide1-cd0", |
| # "stats":{ |
| # "wr_highest_offset":0, |
| # "wr_bytes":0, |
| # "wr_operations":0, |
| # "rd_bytes":0, |
| # "rd_operations":0 |
| # "flush_operations":0, |
| # "wr_total_times_ns":0 |
| # "rd_total_times_ns":0 |
| # "flush_total_times_ns":0, |
| # "rd_merged":0, |
| # "wr_merged":0, |
| # "account_invalid":false, |
| # "account_failed":false |
| # }, |
| # "qdev": "/machine/unattached/device[24]" |
| # }, |
| # { |
| # "device":"floppy0", |
| # "stats":{ |
| # "wr_highest_offset":0, |
| # "wr_bytes":0, |
| # "wr_operations":0, |
| # "rd_bytes":0, |
| # "rd_operations":0 |
| # "flush_operations":0, |
| # "wr_total_times_ns":0 |
| # "rd_total_times_ns":0 |
| # "flush_total_times_ns":0, |
| # "rd_merged":0, |
| # "wr_merged":0, |
| # "account_invalid":false, |
| # "account_failed":false |
| # }, |
| # "qdev": "/machine/unattached/device[16]" |
| # }, |
| # { |
| # "device":"sd0", |
| # "stats":{ |
| # "wr_highest_offset":0, |
| # "wr_bytes":0, |
| # "wr_operations":0, |
| # "rd_bytes":0, |
| # "rd_operations":0 |
| # "flush_operations":0, |
| # "wr_total_times_ns":0 |
| # "rd_total_times_ns":0 |
| # "flush_total_times_ns":0, |
| # "rd_merged":0, |
| # "wr_merged":0, |
| # "account_invalid":false, |
| # "account_failed":false |
| # } |
| # } |
| # ] |
| # } |
| ## |
| { 'command': 'query-blockstats', |
| 'data': { '*query-nodes': 'bool' }, |
| 'returns': ['BlockStats'], |
| 'allow-preconfig': true } |
| |
| ## |
| # @BlockdevOnError: |
| # |
| # An enumeration of possible behaviors for errors on I/O operations. |
| # The exact meaning depends on whether the I/O was initiated by a |
| # guest or by a block job |
| # |
| # @report: for guest operations, report the error to the guest; for |
| # jobs, cancel the job |
| # |
| # @ignore: ignore the error, only report a QMP event (BLOCK_IO_ERROR |
| # or BLOCK_JOB_ERROR). The backup, mirror and commit block jobs |
| # retry the failing request later and may still complete |
| # successfully. The stream block job continues to stream and will |
| # complete with an error. |
| # |
| # @enospc: same as @stop on ENOSPC, same as @report otherwise. |
| # |
| # @stop: for guest operations, stop the virtual machine; for jobs, |
| # pause the job |
| # |
| # @auto: inherit the error handling policy of the backend (since: 2.7) |
| # |
| # Since: 1.3 |
| ## |
| { 'enum': 'BlockdevOnError', |
| 'data': ['report', 'ignore', 'enospc', 'stop', 'auto'] } |
| |
| ## |
| # @MirrorSyncMode: |
| # |
| # An enumeration of possible behaviors for the initial synchronization |
| # phase of storage mirroring. |
| # |
| # @top: copies data in the topmost image to the destination |
| # |
| # @full: copies data from all images to the destination |
| # |
| # @none: only copy data written from now on |
| # |
| # @incremental: only copy data described by the dirty bitmap. |
| # (since: 2.4) |
| # |
| # @bitmap: only copy data described by the dirty bitmap. (since: 4.2) |
| # Behavior on completion is determined by the BitmapSyncMode. |
| # |
| # Since: 1.3 |
| ## |
| { 'enum': 'MirrorSyncMode', |
| 'data': ['top', 'full', 'none', 'incremental', 'bitmap'] } |
| |
| ## |
| # @BitmapSyncMode: |
| # |
| # An enumeration of possible behaviors for the synchronization of a |
| # bitmap when used for data copy operations. |
| # |
| # @on-success: The bitmap is only synced when the operation is |
| # successful. This is the behavior always used for 'INCREMENTAL' |
| # backups. |
| # |
| # @never: The bitmap is never synchronized with the operation, and is |
| # treated solely as a read-only manifest of blocks to copy. |
| # |
| # @always: The bitmap is always synchronized with the operation, |
| # regardless of whether or not the operation was successful. |
| # |
| # Since: 4.2 |
| ## |
| { 'enum': 'BitmapSyncMode', |
| 'data': ['on-success', 'never', 'always'] } |
| |
| ## |
| # @MirrorCopyMode: |
| # |
| # An enumeration whose values tell the mirror block job when to |
| # trigger writes to the target. |
| # |
| # @background: copy data in background only. |
| # |
| # @write-blocking: when data is written to the source, write it |
| # (synchronously) to the target as well. In addition, data is |
| # copied in background just like in @background mode. |
| # |
| # Since: 3.0 |
| ## |
| { 'enum': 'MirrorCopyMode', |
| 'data': ['background', 'write-blocking'] } |
| |
| ## |
| # @BlockJobInfoMirror: |
| # |
| # Information specific to mirror block jobs. |
| # |
| # @actively-synced: Whether the source is actively synced to the |
| # target, i.e. same data and new writes are done synchronously to |
| # both. |
| # |
| # Since: 8.2 |
| ## |
| { 'struct': 'BlockJobInfoMirror', |
| 'data': { 'actively-synced': 'bool' } } |
| |
| ## |
| # @BlockJobInfo: |
| # |
| # Information about a long-running block device operation. |
| # |
| # @type: the job type ('stream' for image streaming) |
| # |
| # @device: The job identifier. Originally the device name but other |
| # values are allowed since QEMU 2.7 |
| # |
| # @len: Estimated @offset value at the completion of the job. This |
| # value can arbitrarily change while the job is running, in both |
| # directions. |
| # |
| # @offset: Progress made until now. The unit is arbitrary and the |
| # value can only meaningfully be used for the ratio of @offset to |
| # @len. The value is monotonically increasing. |
| # |
| # @busy: false if the job is known to be in a quiescent state, with no |
| # pending I/O. (Since 1.3) |
| # |
| # @paused: whether the job is paused or, if @busy is true, will pause |
| # itself as soon as possible. (Since 1.3) |
| # |
| # @speed: the rate limit, bytes per second |
| # |
| # @io-status: the status of the job (since 1.3) |
| # |
| # @ready: true if the job may be completed (since 2.2) |
| # |
| # @status: Current job state/status (since 2.12) |
| # |
| # @auto-finalize: Job will finalize itself when PENDING, moving to the |
| # CONCLUDED state. (since 2.12) |
| # |
| # @auto-dismiss: Job will dismiss itself when CONCLUDED, moving to the |
| # NULL state and disappearing from the query list. (since 2.12) |
| # |
| # @error: Error information if the job did not complete successfully. |
| # Not set if the job completed successfully. (since 2.12.1) |
| # |
| # Since: 1.1 |
| ## |
| { 'union': 'BlockJobInfo', |
| 'base': {'type': 'JobType', 'device': 'str', 'len': 'int', |
| 'offset': 'int', 'busy': 'bool', 'paused': 'bool', 'speed': 'int', |
| 'io-status': 'BlockDeviceIoStatus', 'ready': 'bool', |
| 'status': 'JobStatus', |
| 'auto-finalize': 'bool', 'auto-dismiss': 'bool', |
| '*error': 'str' }, |
| 'discriminator': 'type', |
| 'data': { 'mirror': 'BlockJobInfoMirror' } } |
| |
| ## |
| # @query-block-jobs: |
| # |
| # Return information about long-running block device operations. |
| # |
| # Returns: a list of @BlockJobInfo for each active block job |
| # |
| # Since: 1.1 |
| ## |
| { 'command': 'query-block-jobs', 'returns': ['BlockJobInfo'], |
| 'allow-preconfig': true } |
| |
| ## |
| # @block_resize: |
| # |
| # Resize a block image while a guest is running. |
| # |
| # Either @device or @node-name must be set but not both. |
| # |
| # @device: the name of the device to get the image resized |
| # |
| # @node-name: graph node name to get the image resized (Since 2.0) |
| # |
| # @size: new image size in bytes |
| # |
| # Errors: |
| # - If @device is not a valid block device, DeviceNotFound |
| # |
| # Since: 0.14 |
| # |
| # .. qmp-example:: |
| # |
| # -> { "execute": "block_resize", |
| # "arguments": { "device": "scratch", "size": 1073741824 } } |
| # <- { "return": {} } |
| ## |
| { 'command': 'block_resize', |
| 'data': { '*device': 'str', |
| '*node-name': 'str', |
| 'size': 'int' }, |
| 'coroutine': true, |
| 'allow-preconfig': true } |
| |
| ## |
| # @NewImageMode: |
| # |
| # An enumeration that tells QEMU how to set the backing file path in a |
| # new image file. |
| # |
| # @existing: QEMU should look for an existing image file. |
| # |
| # @absolute-paths: QEMU should create a new image with absolute paths |
| # for the backing file. If there is no backing file available, |
| # the new image will not be backed either. |
| # |
| # Since: 1.1 |
| ## |
| { 'enum': 'NewImageMode', |
| 'data': [ 'existing', 'absolute-paths' ] } |
| |
| ## |
| # @BlockdevSnapshotSync: |
| # |
| # Either @device or @node-name must be set but not both. |
| # |
| # @device: the name of the device to take a snapshot of. |
| # |
| # @node-name: graph node name to generate the snapshot from (Since |
| # 2.0) |
| # |
| # @snapshot-file: the target of the new overlay image. If the file |
| # exists, or if it is a device, the overlay will be created in the |
| # existing file/device. Otherwise, a new file will be created. |
| # |
| # @snapshot-node-name: the graph node name of the new image (Since |
| # 2.0) |
| # |
| # @format: the format of the overlay image, default is 'qcow2'. |
| # |
| # @mode: whether and how QEMU should create a new image, default is |
| # 'absolute-paths'. |
| ## |
| { 'struct': 'BlockdevSnapshotSync', |
| 'data': { '*device': 'str', '*node-name': 'str', |
| 'snapshot-file': 'str', '*snapshot-node-name': 'str', |
| '*format': 'str', '*mode': 'NewImageMode' } } |
| |
| ## |
| # @BlockdevSnapshot: |
| # |
| # @node: device or node name that will have a snapshot taken. |
| # |
| # @overlay: reference to the existing block device that will become |
| # the overlay of @node, as part of taking the snapshot. It must |
| # not have a current backing file (this can be achieved by passing |
| # "backing": null to blockdev-add). |
| # |
| # Since: 2.5 |
| ## |
| { 'struct': 'BlockdevSnapshot', |
| 'data': { 'node': 'str', 'overlay': 'str' } } |
| |
| ## |
| # @BackupPerf: |
| # |
| # Optional parameters for backup. These parameters don't affect |
| # functionality, but may significantly affect performance. |
| # |
| # @use-copy-range: Use copy offloading. Default false. |
| # |
| # @max-workers: Maximum number of parallel requests for the sustained |
| # background copying process. Doesn't influence copy-before-write |
| # operations. Default 64. |
| # |
| # @max-chunk: Maximum request length for the sustained background |
| # copying process. Doesn't influence copy-before-write |
| # operations. 0 means unlimited. If max-chunk is non-zero then |
| # it should not be less than job cluster size which is calculated |
| # as maximum of target image cluster size and 64k. Default 0. |
| # |
| # Since: 6.0 |
| ## |
| { 'struct': 'BackupPerf', |
| 'data': { '*use-copy-range': 'bool', |
| '*max-workers': 'int', '*max-chunk': 'int64' } } |
| |
| ## |
| # @BackupCommon: |
| # |
| # @job-id: identifier for the newly-created block job. If omitted, |
| # the device name will be used. (Since 2.7) |
| # |
| # @device: the device name or node-name of a root node which should be |
| # copied. |
| # |
| # @sync: what parts of the disk image should be copied to the |
| # destination (all the disk, only the sectors allocated in the |
| # topmost image, from a dirty bitmap, or only new I/O). |
| # |
| # @speed: the maximum speed, in bytes per second. The default is 0, |
| # for unlimited. |
| # |
| # @bitmap: The name of a dirty bitmap to use. Must be present if sync |
| # is "bitmap" or "incremental". Can be present if sync is "full" |
| # or "top". Must not be present otherwise. |
| # (Since 2.4 (drive-backup), 3.1 (blockdev-backup)) |
| # |
| # @bitmap-mode: Specifies the type of data the bitmap should contain |
| # after the operation concludes. Must be present if a bitmap was |
| # provided, Must NOT be present otherwise. (Since 4.2) |
| # |
| # @compress: true to compress data, if the target format supports it. |
| # (default: false) (since 2.8) |
| # |
| # @on-source-error: the action to take on an error on the source, |
| # default 'report'. 'stop' and 'enospc' can only be used if the |
| # block device supports io-status (see BlockInfo). |
| # |
| # @on-target-error: the action to take on an error on the target, |
| # default 'report' (no limitations, since this applies to a |
| # different block device than @device). |
| # |
| # @auto-finalize: When false, this job will wait in a PENDING state |
| # after it has finished its work, waiting for @block-job-finalize |
| # before making any block graph changes. When true, this job will |
| # automatically perform its abort or commit actions. Defaults to |
| # true. (Since 2.12) |
| # |
| # @auto-dismiss: When false, this job will wait in a CONCLUDED state |
| # after it has completely ceased all work, and awaits |
| # @block-job-dismiss. When true, this job will automatically |
| # disappear from the query list without user intervention. |
| # Defaults to true. (Since 2.12) |
| # |
| # @filter-node-name: the node name that should be assigned to the |
| # filter driver that the backup job inserts into the graph above |
| # node specified by @drive. If this option is not given, a node |
| # name is autogenerated. (Since: 4.2) |
| # |
| # @discard-source: Discard blocks on source which have already been |
| # copied to the target. (Since 9.1) |
| # |
| # @x-perf: Performance options. (Since 6.0) |
| # |
| # Features: |
| # |
| # @unstable: Member @x-perf is experimental. |
| # |
| # .. note:: @on-source-error and @on-target-error only affect |
| # background I/O. If an error occurs during a guest write request, |
| # the device's rerror/werror actions will be used. |
| # |
| # Since: 4.2 |
| ## |
| { 'struct': 'BackupCommon', |
| 'data': { '*job-id': 'str', 'device': 'str', |
| 'sync': 'MirrorSyncMode', '*speed': 'int', |
| '*bitmap': 'str', '*bitmap-mode': 'BitmapSyncMode', |
| '*compress': 'bool', |
| '*on-source-error': 'BlockdevOnError', |
| '*on-target-error': 'BlockdevOnError', |
| '*auto-finalize': 'bool', '*auto-dismiss': 'bool', |
| '*filter-node-name': 'str', |
| '*discard-source': 'bool', |
| '*x-perf': { 'type': 'BackupPerf', |
| 'features': [ 'unstable' ] } } } |
| |
| ## |
| # @DriveBackup: |
| # |
| # @target: the target of the new image. If the file exists, or if it |
| # is a device, the existing file/device will be used as the new |
| # destination. If it does not exist, a new file will be created. |
| # |
| # @format: the format of the new destination, default is to probe if |
| # @mode is 'existing', else the format of the source |
| # |
| # @mode: whether and how QEMU should create a new image, default is |
| # 'absolute-paths'. |
| # |
| # Since: 1.6 |
| ## |
| { 'struct': 'DriveBackup', |
| 'base': 'BackupCommon', |
| 'data': { 'target': 'str', |
| '*format': 'str', |
| '*mode': 'NewImageMode' } } |
| |
| ## |
| # @BlockdevBackup: |
| # |
| # @target: the device name or node-name of the backup target node. |
| # |
| # Since: 2.3 |
| ## |
| { 'struct': 'BlockdevBackup', |
| 'base': 'BackupCommon', |
| 'data': { 'target': 'str' } } |
| |
| ## |
| # @blockdev-snapshot-sync: |
| # |
| # Takes a synchronous snapshot of a block device. |
| # |
| # Errors: |
| # - If @device is not a valid block device, DeviceNotFound |
| # |
| # Since: 0.14 |
| # |
| # .. qmp-example:: |
| # |
| # -> { "execute": "blockdev-snapshot-sync", |
| # "arguments": { "device": "ide-hd0", |
| # "snapshot-file": |
| # "/some/place/my-image", |
| # "format": "qcow2" } } |
| # <- { "return": {} } |
| ## |
| { 'command': 'blockdev-snapshot-sync', |
| 'data': 'BlockdevSnapshotSync', |
| 'allow-preconfig': true } |
| |
| ## |
| # @blockdev-snapshot: |
| # |
| # Takes a snapshot of a block device. |
| # |
| # Take a snapshot, by installing 'node' as the backing image of |
| # 'overlay'. Additionally, if 'node' is associated with a block |
| # device, the block device changes to using 'overlay' as its new |
| # active image. |
| # |
| # Features: |
| # |
| # @allow-write-only-overlay: If present, the check whether this |
| # operation is safe was relaxed so that it can be used to change |
| # backing file of a destination of a blockdev-mirror. (since 5.0) |
| # |
| # Since: 2.5 |
| # |
| # .. qmp-example:: |
| # |
| # -> { "execute": "blockdev-add", |
| # "arguments": { "driver": "qcow2", |
| # "node-name": "node1534", |
| # "file": { "driver": "file", |
| # "filename": "hd1.qcow2" }, |
| # "backing": null } } |
| # |
| # <- { "return": {} } |
| # |
| # -> { "execute": "blockdev-snapshot", |
| # "arguments": { "node": "ide-hd0", |
| # "overlay": "node1534" } } |
| # <- { "return": {} } |
| ## |
| { 'command': 'blockdev-snapshot', |
| 'data': 'BlockdevSnapshot', |
| 'features': [ 'allow-write-only-overlay' ], |
| 'allow-preconfig': true } |
| |
| ## |
| # @change-backing-file: |
| # |
| # Change the backing file in the image file metadata. This does not |
| # cause QEMU to reopen the image file to reparse the backing filename |
| # (it may, however, perform a reopen to change permissions from r/o -> |
| # r/w -> r/o, if needed). The new backing file string is written into |
| # the image file metadata, and the QEMU internal strings are updated. |
| # |
| # @image-node-name: The name of the block driver state node of the |
| # image to modify. The "device" argument is used to verify |
| # "image-node-name" is in the chain described by "device". |
| # |
| # @device: The device name or node-name of the root node that owns |
| # image-node-name. |
| # |
| # @backing-file: The string to write as the backing file. This string |
| # is not validated, so care should be taken when specifying the |
| # string or the image chain may not be able to be reopened again. |
| # |
| # Errors: |
| # - If "device" does not exist or cannot be determined, |
| # DeviceNotFound |
| # |
| # Since: 2.1 |
| ## |
| { 'command': 'change-backing-file', |
| 'data': { 'device': 'str', 'image-node-name': 'str', |
| 'backing-file': 'str' }, |
| 'allow-preconfig': true } |
| |
| ## |
| # @block-commit: |
| # |
| # Live commit of data from overlay image nodes into backing nodes - |
| # i.e., writes data between 'top' and 'base' into 'base'. |
| # |
| # If top == base, that is an error. If top has no overlays on top of |
| # it, or if it is in use by a writer, the job will not be completed by |
| # itself. The user needs to complete the job with the |
| # block-job-complete command after getting the ready event. (Since |
| # 2.0) |
| # |
| # If the base image is smaller than top, then the base image will be |
| # resized to be the same size as top. If top is smaller than the base |
| # image, the base will not be truncated. If you want the base image |
| # size to match the size of the smaller top, you can safely truncate |
| # it yourself once the commit operation successfully completes. |
| # |
| # @job-id: identifier for the newly-created block job. If omitted, |
| # the device name will be used. (Since 2.7) |
| # |
| # @device: the device name or node-name of a root node |
| # |
| # @base-node: The node name of the backing image to write data into. |
| # If not specified, this is the deepest backing image. |
| # (since: 3.1) |
| # |
| # @base: Same as @base-node, except that it is a file name rather than |
| # a node name. This must be the exact filename string that was |
| # used to open the node; other strings, even if addressing the |
| # same file, are not accepted |
| # |
| # @top-node: The node name of the backing image within the image chain |
| # which contains the topmost data to be committed down. If not |
| # specified, this is the active layer. (since: 3.1) |
| # |
| # @top: Same as @top-node, except that it is a file name rather than a |
| # node name. This must be the exact filename string that was used |
| # to open the node; other strings, even if addressing the same |
| # file, are not accepted |
| # |
| # @backing-file: The backing file string to write into the overlay |
| # image of 'top'. If 'top' does not have an overlay image, or if |
| # 'top' is in use by a writer, specifying a backing file string is |
| # an error. |
| # |
| # This filename is not validated. If a pathname string is such |
| # that it cannot be resolved by QEMU, that means that subsequent |
| # QMP or HMP commands must use node-names for the image in |
| # question, as filename lookup methods will fail. |
| # |
| # If not specified, QEMU will automatically determine the backing |
| # file string to use, or error out if there is no obvious choice. |
| # Care should be taken when specifying the string, to specify a |
| # valid filename or protocol. (Since 2.1) |
| # |
| # @backing-mask-protocol: If true, replace any protocol mentioned in |
| # the 'backing file format' with 'raw', rather than storing the |
| # protocol name as the backing format. Can be used even when no |
| # image header will be updated (default false; since 9.0). |
| # |
| # @speed: the maximum speed, in bytes per second |
| # |
| # @on-error: the action to take on an error. 'ignore' means that the |
| # request should be retried. (default: report; Since: 5.0) |
| # |
| # @filter-node-name: the node name that should be assigned to the |
| # filter driver that the commit job inserts into the graph above |
| # @top. If this option is not given, a node name is |
| # autogenerated. (Since: 2.9) |
| # |
| # @auto-finalize: When false, this job will wait in a PENDING state |
| # after it has finished its work, waiting for @block-job-finalize |
| # before making any block graph changes. When true, this job will |
| # automatically perform its abort or commit actions. Defaults to |
| # true. (Since 3.1) |
| # |
| # @auto-dismiss: When false, this job will wait in a CONCLUDED state |
| # after it has completely ceased all work, and awaits |
| # @block-job-dismiss. When true, this job will automatically |
| # disappear from the query list without user intervention. |
| # Defaults to true. (Since 3.1) |
| # |
| # Features: |
| # |
| # @deprecated: Members @base and @top are deprecated. Use @base-node |
| # and @top-node instead. |
| # |
| # Errors: |
| # - If @device does not exist, DeviceNotFound |
| # - Any other error returns a GenericError. |
| # |
| # Since: 1.3 |
| # |
| # .. qmp-example:: |
| # |
| # -> { "execute": "block-commit", |
| # "arguments": { "device": "virtio0", |
| # "top": "/tmp/snap1.qcow2" } } |
| # <- { "return": {} } |
| ## |
| { 'command': 'block-commit', |
| 'data': { '*job-id': 'str', 'device': 'str', '*base-node': 'str', |
| '*base': { 'type': 'str', 'features': [ 'deprecated' ] }, |
| '*top-node': 'str', |
| '*top': { 'type': 'str', 'features': [ 'deprecated' ] }, |
| '*backing-file': 'str', '*backing-mask-protocol': 'bool', |
| '*speed': 'int', |
| '*on-error': 'BlockdevOnError', |
| '*filter-node-name': 'str', |
| '*auto-finalize': 'bool', '*auto-dismiss': 'bool' }, |
| 'allow-preconfig': true } |
| |
| ## |
| # @drive-backup: |
| # |
| # Start a point-in-time copy of a block device to a new destination. |
| # The status of ongoing drive-backup operations can be checked with |
| # query-block-jobs where the BlockJobInfo.type field has the value |
| # 'backup'. The operation can be stopped before it has completed |
| # using the block-job-cancel command. |
| # |
| # Features: |
| # |
| # @deprecated: This command is deprecated. Use @blockdev-backup |
| # instead. |
| # |
| # Errors: |
| # - If @device is not a valid block device, GenericError |
| # |
| # Since: 1.6 |
| # |
| # .. qmp-example:: |
| # |
| # -> { "execute": "drive-backup", |
| # "arguments": { "device": "drive0", |
| # "sync": "full", |
| # "target": "backup.img" } } |
| # <- { "return": {} } |
| ## |
| { 'command': 'drive-backup', 'boxed': true, |
| 'data': 'DriveBackup', 'features': ['deprecated'], |
| 'allow-preconfig': true } |
| |
| ## |
| # @blockdev-backup: |
| # |
| # Start a point-in-time copy of a block device to a new destination. |
| # The status of ongoing blockdev-backup operations can be checked with |
| # query-block-jobs where the BlockJobInfo.type field has the value |
| # 'backup'. The operation can be stopped before it has completed |
| # using the block-job-cancel command. |
| # |
| # Errors: |
| # - If @device is not a valid block device, DeviceNotFound |
| # |
| # Since: 2.3 |
| # |
| # .. qmp-example:: |
| # |
| # -> { "execute": "blockdev-backup", |
| # "arguments": { "device": "src-id", |
| # "sync": "full", |
| # "target": "tgt-id" } } |
| # <- { "return": {} } |
| ## |
| { 'command': 'blockdev-backup', 'boxed': true, |
| 'data': 'BlockdevBackup', |
| 'allow-preconfig': true } |
| |
| ## |
| # @query-named-block-nodes: |
| # |
| # Get the named block driver list |
| # |
| # @flat: Omit the nested data about backing image ("backing-image" |
| # key) if true. Default is false (Since 5.0) |
| # |
| # Returns: the list of BlockDeviceInfo |
| # |
| # Since: 2.0 |
| # |
| # .. qmp-example:: |
| # |
| # -> { "execute": "query-named-block-nodes" } |
| # <- { "return": [ { "ro":false, |
| # "drv":"qcow2", |
| # "encrypted":false, |
| # "file":"disks/test.qcow2", |
| # "node-name": "my-node", |
| # "backing_file_depth":1, |
| # "detect_zeroes":"off", |
| # "bps":1000000, |
| # "bps_rd":0, |
| # "bps_wr":0, |
| # "iops":1000000, |
| # "iops_rd":0, |
| # "iops_wr":0, |
| # "bps_max": 8000000, |
| # "bps_rd_max": 0, |
| # "bps_wr_max": 0, |
| # "iops_max": 0, |
| # "iops_rd_max": 0, |
| # "iops_wr_max": 0, |
| # "iops_size": 0, |
| # "write_threshold": 0, |
| # "image":{ |
| # "filename":"disks/test.qcow2", |
| # "format":"qcow2", |
| # "virtual-size":2048000, |
| # "backing_file":"base.qcow2", |
| # "full-backing-filename":"disks/base.qcow2", |
| # "backing-filename-format":"qcow2", |
| # "snapshots":[ |
| # { |
| # "id": "1", |
| # "name": "snapshot1", |
| # "vm-state-size": 0, |
| # "date-sec": 10000200, |
| # "date-nsec": 12, |
| # "vm-clock-sec": 206, |
| # "vm-clock-nsec": 30 |
| # } |
| # ], |
| # "backing-image":{ |
| # "filename":"disks/base.qcow2", |
| # "format":"qcow2", |
| # "virtual-size":2048000 |
| # } |
| # } } ] } |
| ## |
| { 'command': 'query-named-block-nodes', |
| 'returns': [ 'BlockDeviceInfo' ], |
| 'data': { '*flat': 'bool' }, |
| 'allow-preconfig': true } |
| |
| ## |
| # @XDbgBlockGraphNodeType: |
| # |
| # @block-backend: corresponds to BlockBackend |
| # |
| # @block-job: corresponds to BlockJob |
| # |
| # @block-driver: corresponds to BlockDriverState |
| # |
| # Since: 4.0 |
| ## |
| { 'enum': 'XDbgBlockGraphNodeType', |
| 'data': [ 'block-backend', 'block-job', 'block-driver' ] } |
| |
| ## |
| # @XDbgBlockGraphNode: |
| # |
| # @id: Block graph node identifier. This @id is generated only for |
| # x-debug-query-block-graph and does not relate to any other |
| # identifiers in Qemu. |
| # |
| # @type: Type of graph node. Can be one of block-backend, block-job |
| # or block-driver-state. |
| # |
| # @name: Human readable name of the node. Corresponds to node-name |
| # for block-driver-state nodes; is not guaranteed to be unique in |
| # the whole graph (with block-jobs and block-backends). |
| # |
| # Since: 4.0 |
| ## |
| { 'struct': 'XDbgBlockGraphNode', |
| 'data': { 'id': 'uint64', 'type': 'XDbgBlockGraphNodeType', 'name': 'str' } } |
| |
| ## |
| # @BlockPermission: |
| # |
| # Enum of base block permissions. |
| # |
| # @consistent-read: A user that has the "permission" of consistent |
| # reads is guaranteed that their view of the contents of the block |
| # device is complete and self-consistent, representing the |
| # contents of a disk at a specific point. For most block devices |
| # (including their backing files) this is true, but the property |
| # cannot be maintained in a few situations like for intermediate |
| # nodes of a commit block job. |
| # |
| # @write: This permission is required to change the visible disk |
| # contents. |
| # |
| # @write-unchanged: This permission (which is weaker than |
| # BLK_PERM_WRITE) is both enough and required for writes to the |
| # block node when the caller promises that the visible disk |
| # content doesn't change. As the BLK_PERM_WRITE permission is |
| # strictly stronger, either is sufficient to perform an unchanging |
| # write. |
| # |
| # @resize: This permission is required to change the size of a block |
| # node. |
| # |
| # Since: 4.0 |
| ## |
| { 'enum': 'BlockPermission', |
| 'data': [ 'consistent-read', 'write', 'write-unchanged', 'resize' ] } |
| |
| ## |
| # @XDbgBlockGraphEdge: |
| # |
| # Block Graph edge description for x-debug-query-block-graph. |
| # |
| # @parent: parent id |
| # |
| # @child: child id |
| # |
| # @name: name of the relation (examples are 'file' and 'backing') |
| # |
| # @perm: granted permissions for the parent operating on the child |
| # |
| # @shared-perm: permissions that can still be granted to other users |
| # of the child while it is still attached to this parent |
| # |
| # Since: 4.0 |
| ## |
| { 'struct': 'XDbgBlockGraphEdge', |
| 'data': { 'parent': 'uint64', 'child': 'uint64', |
| 'name': 'str', 'perm': [ 'BlockPermission' ], |
| 'shared-perm': [ 'BlockPermission' ] } } |
| |
| ## |
| # @XDbgBlockGraph: |
| # |
| # Block Graph - list of nodes and list of edges. |
| # |
| # Since: 4.0 |
| ## |
| { 'struct': 'XDbgBlockGraph', |
| 'data': { 'nodes': ['XDbgBlockGraphNode'], 'edges': ['XDbgBlockGraphEdge'] } } |
| |
| ## |
| # @x-debug-query-block-graph: |
| # |
| # Get the block graph. |
| # |
| # Features: |
| # |
| # @unstable: This command is meant for debugging. |
| # |
| # Since: 4.0 |
| ## |
| { 'command': 'x-debug-query-block-graph', 'returns': 'XDbgBlockGraph', |
| 'features': [ 'unstable' ], |
| 'allow-preconfig': true } |
| |
| ## |
| # @drive-mirror: |
| # |
| # Start mirroring a block device's writes to a new destination. |
| # target specifies the target of the new image. If the file exists, |
| # or if it is a device, it will be used as the new destination for |
| # writes. If it does not exist, a new file will be created. @format |
| # specifies the format of the mirror image, default is to probe if |
| # mode='existing', else the format of the source. |
| # |
| # Errors: |
| # - If @device is not a valid block device, GenericError |
| # |
| # Since: 1.3 |
| # |
| # .. qmp-example:: |
| # |
| # -> { "execute": "drive-mirror", |
| # "arguments": { "device": "ide-hd0", |
| # "target": "/some/place/my-image", |
| # "sync": "full", |
| # "format": "qcow2" } } |
| # <- { "return": {} } |
| ## |
| { 'command': 'drive-mirror', 'boxed': true, |
| 'data': 'DriveMirror', |
| 'allow-preconfig': true } |
| |
| ## |
| # @DriveMirror: |
| # |
| # A set of parameters describing drive mirror setup. |
| # |
| # @job-id: identifier for the newly-created block job. If omitted, |
| # the device name will be used. (Since 2.7) |
| # |
| # @device: the device name or node-name of a root node whose writes |
| # should be mirrored. |
| # |
| # @target: the target of the new image. If the file exists, or if it |
| # is a device, the existing file/device will be used as the new |
| # destination. If it does not exist, a new file will be created. |
| # |
| # @format: the format of the new destination, default is to probe if |
| # @mode is 'existing', else the format of the source |
| # |
| # @node-name: the new block driver state node name in the graph (Since |
| # 2.1) |
| # |
| # @replaces: with sync=full graph node name to be replaced by the new |
| # image when a whole image copy is done. This can be used to |
| # repair broken Quorum files. By default, @device is replaced, |
| # although implicitly created filters on it are kept. (Since 2.1) |
| # |
| # @mode: whether and how QEMU should create a new image, default is |
| # 'absolute-paths'. |
| # |
| # @speed: the maximum speed, in bytes per second |
| # |
| # @sync: what parts of the disk image should be copied to the |
| # destination (all the disk, only the sectors allocated in the |
| # topmost image, or only new I/O). |
| # |
| # @granularity: granularity of the dirty bitmap, default is 64K if the |
| # image format doesn't have clusters, 4K if the clusters are |
| # smaller than that, else the cluster size. Must be a power of 2 |
| # between 512 and 64M (since 1.4). |
| # |
| # @buf-size: maximum amount of data in flight from source to target |
| # (since 1.4). |
| # |
| # @on-source-error: the action to take on an error on the source, |
| # default 'report'. 'stop' and 'enospc' can only be used if the |
| # block device supports io-status (see BlockInfo). |
| # |
| # @on-target-error: the action to take on an error on the target, |
| # default 'report' (no limitations, since this applies to a |
| # different block device than @device). |
| # |
| # @unmap: Whether to try to unmap target sectors where source has only |
| # zero. If true, and target unallocated sectors will read as |
| # zero, target image sectors will be unmapped; otherwise, zeroes |
| # will be written. Both will result in identical contents. |
| # Default is true. (Since 2.4) |
| # |
| # @copy-mode: when to copy data to the destination; defaults to |
| # 'background' (Since: 3.0) |
| # |
| # @auto-finalize: When false, this job will wait in a PENDING state |
| # after it has finished its work, waiting for @block-job-finalize |
| # before making any block graph changes. When true, this job will |
| # automatically perform its abort or commit actions. Defaults to |
| # true. (Since 3.1) |
| # |
| # @auto-dismiss: When false, this job will wait in a CONCLUDED state |
| # after it has completely ceased all work, and awaits |
| # @block-job-dismiss. When true, this job will automatically |
| # disappear from the query list without user intervention. |
| # Defaults to true. (Since 3.1) |
| # |
| # Since: 1.3 |
| ## |
| { 'struct': 'DriveMirror', |
| 'data': { '*job-id': 'str', 'device': 'str', 'target': 'str', |
| '*format': 'str', '*node-name': 'str', '*replaces': 'str', |
| 'sync': 'MirrorSyncMode', '*mode': 'NewImageMode', |
| '*speed': 'int', '*granularity': 'uint32', |
| '*buf-size': 'int', '*on-source-error': 'BlockdevOnError', |
| '*on-target-error': 'BlockdevOnError', |
| '*unmap': 'bool', '*copy-mode': 'MirrorCopyMode', |
| '*auto-finalize': 'bool', '*auto-dismiss': 'bool' } } |
| |
| ## |
| # @BlockDirtyBitmap: |
| # |
| # @node: name of device/node which the bitmap is tracking |
| # |
| # @name: name of the dirty bitmap |
| # |
| # Since: 2.4 |
| ## |
| { 'struct': 'BlockDirtyBitmap', |
| 'data': { 'node': 'str', 'name': 'str' } } |
| |
| ## |
| # @BlockDirtyBitmapAdd: |
| # |
| # @node: name of device/node which the bitmap is tracking |
| # |
| # @name: name of the dirty bitmap (must be less than 1024 bytes) |
| # |
| # @granularity: the bitmap granularity, default is 64k for |
| # block-dirty-bitmap-add |
| # |
| # @persistent: the bitmap is persistent, i.e. it will be saved to the |
| # corresponding block device image file on its close. For now |
| # only Qcow2 disks support persistent bitmaps. Default is false |
| # for block-dirty-bitmap-add. (Since: 2.10) |
| # |
| # @disabled: the bitmap is created in the disabled state, which means |
| # that it will not track drive changes. The bitmap may be enabled |
| # with block-dirty-bitmap-enable. Default is false. (Since: 4.0) |
| # |
| # Since: 2.4 |
| ## |
| { 'struct': 'BlockDirtyBitmapAdd', |
| 'data': { 'node': 'str', 'name': 'str', '*granularity': 'uint32', |
| '*persistent': 'bool', '*disabled': 'bool' } } |
| |
| ## |
| # @BlockDirtyBitmapOrStr: |
| # |
| # @local: name of the bitmap, attached to the same node as target |
| # bitmap. |
| # |
| # @external: bitmap with specified node |
| # |
| # Since: 4.1 |
| ## |
| { 'alternate': 'BlockDirtyBitmapOrStr', |
| 'data': { 'local': 'str', |
| 'external': 'BlockDirtyBitmap' } } |
| |
| ## |
| # @BlockDirtyBitmapMerge: |
| # |
| # @node: name of device/node which the @target bitmap is tracking |
| # |
| # @target: name of the destination dirty bitmap |
| # |
| # @bitmaps: name(s) of the source dirty bitmap(s) at @node and/or |
| # fully specified BlockDirtyBitmap elements. The latter are |
| # supported since 4.1. |
| # |
| # Since: 4.0 |
| ## |
| { 'struct': 'BlockDirtyBitmapMerge', |
| 'data': { 'node': 'str', 'target': 'str', |
| 'bitmaps': ['BlockDirtyBitmapOrStr'] } } |
| |
| ## |
| # @block-dirty-bitmap-add: |
| # |
| # Create a dirty bitmap with a name on the node, and start tracking |
| # the writes. |
| # |
| # Errors: |
| # - If @node is not a valid block device or node, DeviceNotFound |
| # - If @name is already taken, GenericError with an explanation |
| # |
| # Since: 2.4 |
| # |
| # .. qmp-example:: |
| # |
| # -> { "execute": "block-dirty-bitmap-add", |
| # "arguments": { "node": "drive0", "name": "bitmap0" } } |
| # <- { "return": {} } |
| ## |
| { 'command': 'block-dirty-bitmap-add', |
| 'data': 'BlockDirtyBitmapAdd', |
| 'allow-preconfig': true } |
| |
| ## |
| # @block-dirty-bitmap-remove: |
| # |
| # Stop write tracking and remove the dirty bitmap that was created |
| # with block-dirty-bitmap-add. If the bitmap is persistent, remove it |
| # from its storage too. |
| # |
| # Errors: |
| # - If @node is not a valid block device or node, DeviceNotFound |
| # - If @name is not found, GenericError with an explanation |
| # - if @name is frozen by an operation, GenericError |
| # |
| # Since: 2.4 |
| # |
| # .. qmp-example:: |
| # |
| # -> { "execute": "block-dirty-bitmap-remove", |
| # "arguments": { "node": "drive0", "name": "bitmap0" } } |
| # <- { "return": {} } |
| ## |
| { 'command': 'block-dirty-bitmap-remove', |
| 'data': 'BlockDirtyBitmap', |
| 'allow-preconfig': true } |
| |
| ## |
| # @block-dirty-bitmap-clear: |
| # |
| # Clear (reset) a dirty bitmap on the device, so that an incremental |
| # backup from this point in time forward will only backup clusters |
| # modified after this clear operation. |
| # |
| # Errors: |
| # - If @node is not a valid block device, DeviceNotFound |
| # - If @name is not found, GenericError with an explanation |
| # |
| # Since: 2.4 |
| # |
| # .. qmp-example:: |
| # |
| # -> { "execute": "block-dirty-bitmap-clear", |
| # "arguments": { "node": "drive0", "name": "bitmap0" } } |
| # <- { "return": {} } |
| ## |
| { 'command': 'block-dirty-bitmap-clear', |
| 'data': 'BlockDirtyBitmap', |
| 'allow-preconfig': true } |
| |
| ## |
| # @block-dirty-bitmap-enable: |
| # |
| # Enables a dirty bitmap so that it will begin tracking disk changes. |
| # |
| # Errors: |
| # - If @node is not a valid block device, DeviceNotFound |
| # - If @name is not found, GenericError with an explanation |
| # |
| # Since: 4.0 |
| # |
| # .. qmp-example:: |
| # |
| # -> { "execute": "block-dirty-bitmap-enable", |
| # "arguments": { "node": "drive0", "name": "bitmap0" } } |
| # <- { "return": {} } |
| ## |
| { 'command': 'block-dirty-bitmap-enable', |
| 'data': 'BlockDirtyBitmap', |
| 'allow-preconfig': true } |
| |
| ## |
| # @block-dirty-bitmap-disable: |
| # |
| # Disables a dirty bitmap so that it will stop tracking disk changes. |
| # |
| # Errors: |
| # - If @node is not a valid block device, DeviceNotFound |
| # - If @name is not found, GenericError with an explanation |
| # |
| # Since: 4.0 |
| # |
| # .. qmp-example:: |
| # |
| # -> { "execute": "block-dirty-bitmap-disable", |
| # "arguments": { "node": "drive0", "name": "bitmap0" } } |
| # <- { "return": {} } |
| ## |
| { 'command': 'block-dirty-bitmap-disable', |
| 'data': 'BlockDirtyBitmap', |
| 'allow-preconfig': true } |
| |
| ## |
| # @block-dirty-bitmap-merge: |
| # |
| # Merge dirty bitmaps listed in @bitmaps to the @target dirty bitmap. |
| # Dirty bitmaps in @bitmaps will be unchanged, except if it also |
| # appears as the @target bitmap. Any bits already set in @target will |
| # still be set after the merge, i.e., this operation does not clear |
| # the target. On error, @target is unchanged. |
| # |
| # The resulting bitmap will count as dirty any clusters that were |
| # dirty in any of the source bitmaps. This can be used to achieve |
| # backup checkpoints, or in simpler usages, to copy bitmaps. |
| # |
| # Errors: |
| # - If @node is not a valid block device, DeviceNotFound |
| # - If any bitmap in @bitmaps or @target is not found, |
| # GenericError |
| # - If any of the bitmaps have different sizes or granularities, |
| # GenericError |
| # |
| # Since: 4.0 |
| # |
| # .. qmp-example:: |
| # |
| # -> { "execute": "block-dirty-bitmap-merge", |
| # "arguments": { "node": "drive0", "target": "bitmap0", |
| # "bitmaps": ["bitmap1"] } } |
| # <- { "return": {} } |
| ## |
| { 'command': 'block-dirty-bitmap-merge', |
| 'data': 'BlockDirtyBitmapMerge', |
| 'allow-preconfig': true } |
| |
| ## |
| # @BlockDirtyBitmapSha256: |
| # |
| # SHA256 hash of dirty bitmap data |
| # |
| # @sha256: ASCII representation of SHA256 bitmap hash |
| # |
| # Since: 2.10 |
| ## |
| { 'struct': 'BlockDirtyBitmapSha256', |
| 'data': {'sha256': 'str'} } |
| |
| ## |
| # @x-debug-block-dirty-bitmap-sha256: |
| # |
| # Get bitmap SHA256. |
| # |
| # Features: |
| # |
| # @unstable: This command is meant for debugging. |
| # |
| # Returns: |
| # BlockDirtyBitmapSha256 |
| # |
| # Errors: |
| # - If @node is not a valid block device, DeviceNotFound |
| # - If @name is not found or if hashing has failed, GenericError |
| # with an explanation |
| # |
| # Since: 2.10 |
| ## |
| { 'command': 'x-debug-block-dirty-bitmap-sha256', |
| 'data': 'BlockDirtyBitmap', 'returns': 'BlockDirtyBitmapSha256', |
| 'features': [ 'unstable' ], |
| 'allow-preconfig': true } |
| |
| ## |
| # @blockdev-mirror: |
| # |
| # Start mirroring a block device's writes to a new destination. |
| # |
| # @job-id: identifier for the newly-created block job. If omitted, |
| # the device name will be used. (Since 2.7) |
| # |
| # @device: The device name or node-name of a root node whose writes |
| # should be mirrored. |
| # |
| # @target: the id or node-name of the block device to mirror to. This |
| # mustn't be attached to guest. |
| # |
| # @replaces: with sync=full graph node name to be replaced by the new |
| # image when a whole image copy is done. This can be used to |
| # repair broken Quorum files. By default, @device is replaced, |
| # although implicitly created filters on it are kept. |
| # |
| # @speed: the maximum speed, in bytes per second |
| # |
| # @sync: what parts of the disk image should be copied to the |
| # destination (all the disk, only the sectors allocated in the |
| # topmost image, or only new I/O). |
| # |
| # @granularity: granularity of the dirty bitmap, default is 64K if the |
| # image format doesn't have clusters, 4K if the clusters are |
| # smaller than that, else the cluster size. Must be a power of 2 |
| # between 512 and 64M |
| # |
| # @buf-size: maximum amount of data in flight from source to target |
| # |
| # @on-source-error: the action to take on an error on the source, |
| # default 'report'. 'stop' and 'enospc' can only be used if the |
| # block device supports io-status (see BlockInfo). |
| # |
| # @on-target-error: the action to take on an error on the target, |
| # default 'report' (no limitations, since this applies to a |
| # different block device than @device). |
| # |
| # @filter-node-name: the node name that should be assigned to the |
| # filter driver that the mirror job inserts into the graph above |
| # @device. If this option is not given, a node name is |
| # autogenerated. (Since: 2.9) |
| # |
| # @copy-mode: when to copy data to the destination; defaults to |
| # 'background' (Since: 3.0) |
| # |
| # @auto-finalize: When false, this job will wait in a PENDING state |
| # after it has finished its work, waiting for @block-job-finalize |
| # before making any block graph changes. When true, this job will |
| # automatically perform its abort or commit actions. Defaults to |
| # true. (Since 3.1) |
| # |
| # @auto-dismiss: When false, this job will wait in a CONCLUDED state |
| # after it has completely ceased all work, and awaits |
| # @block-job-dismiss. When true, this job will automatically |
| # disappear from the query list without user intervention. |
| # Defaults to true. (Since 3.1) |
| # |
| # Since: 2.6 |
| # |
| # .. qmp-example:: |
| # |
| # -> { "execute": "blockdev-mirror", |
| # "arguments": { "device": "ide-hd0", |
| # "target": "target0", |
| # "sync": "full" } } |
| # <- { "return": {} } |
| ## |
| { 'command': 'blockdev-mirror', |
| 'data': { '*job-id': 'str', 'device': 'str', 'target': 'str', |
| '*replaces': 'str', |
| 'sync': 'MirrorSyncMode', |
| '*speed': 'int', '*granularity': 'uint32', |
| '*buf-size': 'int', '*on-source-error': 'BlockdevOnError', |
| '*on-target-error': 'BlockdevOnError', |
| '*filter-node-name': 'str', |
| '*copy-mode': 'MirrorCopyMode', |
| '*auto-finalize': 'bool', '*auto-dismiss': 'bool' }, |
| 'allow-preconfig': true } |
| |
| ## |
| # @BlockIOThrottle: |
| # |
| # A set of parameters describing block throttling. |
| # |
| # @device: Block device name |
| # |
| # @id: The name or QOM path of the guest device (since: 2.8) |
| # |
| # @bps: total throughput limit in bytes per second |
| # |
| # @bps_rd: read throughput limit in bytes per second |
| # |
| # @bps_wr: write throughput limit in bytes per second |
| # |
| # @iops: total I/O operations per second |
| # |
| # @iops_rd: read I/O operations per second |
| # |
| # @iops_wr: write I/O operations per second |
| # |
| # @bps_max: total throughput limit during bursts, in bytes (Since 1.7) |
| # |
| # @bps_rd_max: read throughput limit during bursts, in bytes (Since |
| # 1.7) |
| # |
| # @bps_wr_max: write throughput limit during bursts, in bytes (Since |
| # 1.7) |
| # |
| # @iops_max: total I/O operations per second during bursts, in bytes |
| # (Since 1.7) |
| # |
| # @iops_rd_max: read I/O operations per second during bursts, in bytes |
| # (Since 1.7) |
| # |
| # @iops_wr_max: write I/O operations per second during bursts, in |
| # bytes (Since 1.7) |
| # |
| # @bps_max_length: maximum length of the @bps_max burst period, in |
| # seconds. It must only be set if @bps_max is set as well. |
| # Defaults to 1. (Since 2.6) |
| # |
| # @bps_rd_max_length: maximum length of the @bps_rd_max burst period, |
| # in seconds. It must only be set if @bps_rd_max is set as well. |
| # Defaults to 1. (Since 2.6) |
| # |
| # @bps_wr_max_length: maximum length of the @bps_wr_max burst period, |
| # in seconds. It must only be set if @bps_wr_max is set as well. |
| # Defaults to 1. (Since 2.6) |
| # |
| # @iops_max_length: maximum length of the @iops burst period, in |
| # seconds. It must only be set if @iops_max is set as well. |
| # Defaults to 1. (Since 2.6) |
| # |
| # @iops_rd_max_length: maximum length of the @iops_rd_max burst |
| # period, in seconds. It must only be set if @iops_rd_max is set |
| # as well. Defaults to 1. (Since 2.6) |
| # |
| # @iops_wr_max_length: maximum length of the @iops_wr_max burst |
| # period, in seconds. It must only be set if @iops_wr_max is set |
| # as well. Defaults to 1. (Since 2.6) |
| # |
| # @iops_size: an I/O size in bytes (Since 1.7) |
| # |
| # @group: throttle group name (Since 2.4) |
| # |
| # Features: |
| # |
| # @deprecated: Member @device is deprecated. Use @id instead. |
| # |
| # Since: 1.1 |
| ## |
| { 'struct': 'BlockIOThrottle', |
| 'data': { '*device': { 'type': 'str', 'features': [ 'deprecated' ] }, |
| '*id': 'str', 'bps': 'int', 'bps_rd': 'int', |
| 'bps_wr': 'int', 'iops': 'int', 'iops_rd': 'int', 'iops_wr': 'int', |
| '*bps_max': 'int', '*bps_rd_max': 'int', |
| '*bps_wr_max': 'int', '*iops_max': 'int', |
| '*iops_rd_max': 'int', '*iops_wr_max': 'int', |
| '*bps_max_length': 'int', '*bps_rd_max_length': 'int', |
| '*bps_wr_max_length': 'int', '*iops_max_length': 'int', |
| '*iops_rd_max_length': 'int', '*iops_wr_max_length': 'int', |
| '*iops_size': 'int', '*group': 'str' } } |
| |
| ## |
| # @ThrottleLimits: |
| # |
| # Limit parameters for throttling. Since some limit combinations are |
| # illegal, limits should always be set in one transaction. All fields |
| # are optional. When setting limits, if a field is missing the |
| # current value is not changed. |
| # |
| # @iops-total: limit total I/O operations per second |
| # |
| # @iops-total-max: I/O operations burst |
| # |
| # @iops-total-max-length: length of the iops-total-max burst period, |
| # in seconds It must only be set if @iops-total-max is set as |
| # well. |
| # |
| # @iops-read: limit read operations per second |
| # |
| # @iops-read-max: I/O operations read burst |
| # |
| # @iops-read-max-length: length of the iops-read-max burst period, in |
| # seconds It must only be set if @iops-read-max is set as well. |
| # |
| # @iops-write: limit write operations per second |
| # |
| # @iops-write-max: I/O operations write burst |
| # |
| # @iops-write-max-length: length of the iops-write-max burst period, |
| # in seconds It must only be set if @iops-write-max is set as |
| # well. |
| # |
| # @bps-total: limit total bytes per second |
| # |
| # @bps-total-max: total bytes burst |
| # |
| # @bps-total-max-length: length of the bps-total-max burst period, in |
| # seconds. It must only be set if @bps-total-max is set as well. |
| # |
| # @bps-read: limit read bytes per second |
| # |
| # @bps-read-max: total bytes read burst |
| # |
| # @bps-read-max-length: length of the bps-read-max burst period, in |
| # seconds It must only be set if @bps-read-max is set as well. |
| # |
| # @bps-write: limit write bytes per second |
| # |
| # @bps-write-max: total bytes write burst |
| # |
| # @bps-write-max-length: length of the bps-write-max burst period, in |
| # seconds It must only be set if @bps-write-max is set as well. |
| # |
| # @iops-size: when limiting by iops max size of an I/O in bytes |
| # |
| # Since: 2.11 |
| ## |
| { 'struct': 'ThrottleLimits', |
| 'data': { '*iops-total' : 'int', '*iops-total-max' : 'int', |
| '*iops-total-max-length' : 'int', '*iops-read' : 'int', |
| '*iops-read-max' : 'int', '*iops-read-max-length' : 'int', |
| '*iops-write' : 'int', '*iops-write-max' : 'int', |
| '*iops-write-max-length' : 'int', '*bps-total' : 'int', |
| '*bps-total-max' : 'int', '*bps-total-max-length' : 'int', |
| '*bps-read' : 'int', '*bps-read-max' : 'int', |
| '*bps-read-max-length' : 'int', '*bps-write' : 'int', |
| '*bps-write-max' : 'int', '*bps-write-max-length' : 'int', |
| '*iops-size' : 'int' } } |
| |
| ## |
| # @ThrottleGroupProperties: |
| # |
| # Properties for throttle-group objects. |
| # |
| # @limits: limits to apply for this throttle group |
| # |
| # Features: |
| # |
| # @unstable: All members starting with x- are aliases for the same key |
| # without x- in the @limits object. This is not a stable |
| # interface and may be removed or changed incompatibly in the |
| # future. Use @limits for a supported stable interface. |
| # |
| # Since: 2.11 |
| ## |
| { 'struct': 'ThrottleGroupProperties', |
| 'data': { '*limits': 'ThrottleLimits', |
| '*x-iops-total': { 'type': 'int', |
| 'features': [ 'unstable' ] }, |
| '*x-iops-total-max': { 'type': 'int', |
| 'features': [ 'unstable' ] }, |
| '*x-iops-total-max-length': { 'type': 'int', |
| 'features': [ 'unstable' ] }, |
| '*x-iops-read': { 'type': 'int', |
| 'features': [ 'unstable' ] }, |
| '*x-iops-read-max': { 'type': 'int', |
| 'features': [ 'unstable' ] }, |
| '*x-iops-read-max-length': { 'type': 'int', |
| 'features': [ 'unstable' ] }, |
| '*x-iops-write': { 'type': 'int', |
| 'features': [ 'unstable' ] }, |
| '*x-iops-write-max': { 'type': 'int', |
| 'features': [ 'unstable' ] }, |
| '*x-iops-write-max-length': { 'type': 'int', |
| 'features': [ 'unstable' ] }, |
| '*x-bps-total': { 'type': 'int', |
| 'features': [ 'unstable' ] }, |
| '*x-bps-total-max': { 'type': 'int', |
| 'features': [ 'unstable' ] }, |
| '*x-bps-total-max-length': { 'type': 'int', |
| 'features': [ 'unstable' ] }, |
| '*x-bps-read': { 'type': 'int', |
| 'features': [ 'unstable' ] }, |
| '*x-bps-read-max': { 'type': 'int', |
| 'features': [ 'unstable' ] }, |
| '*x-bps-read-max-length': { 'type': 'int', |
| 'features': [ 'unstable' ] }, |
| '*x-bps-write': { 'type': 'int', |
| 'features': [ 'unstable' ] }, |
| '*x-bps-write-max': { 'type': 'int', |
| 'features': [ 'unstable' ] }, |
| '*x-bps-write-max-length': { 'type': 'int', |
| 'features': [ 'unstable' ] }, |
| '*x-iops-size': { 'type': 'int', |
| 'features': [ 'unstable' ] } } } |
| |
| ## |
| # @block-stream: |
| # |
| # Copy data from a backing file into a block device. |
| # |
| # The block streaming operation is performed in the background until |
| # the entire backing file has been copied. This command returns |
| # immediately once streaming has started. The status of ongoing block |
| # streaming operations can be checked with query-block-jobs. The |
| # operation can be stopped before it has completed using the |
| # block-job-cancel command. |
| # |
| # The node that receives the data is called the top image, can be |
| # located in any part of the chain (but always above the base image; |
| # see below) and can be specified using its device or node name. |
| # Earlier qemu versions only allowed 'device' to name the top level |
| # node; presence of the 'base-node' parameter during introspection can |
| # be used as a witness of the enhanced semantics of 'device'. |
| # |
| # If a base file is specified then sectors are not copied from that |
| # base file and its backing chain. This can be used to stream a |
| # subset of the backing file chain instead of flattening the entire |
| # image. When streaming completes the image file will have the base |
| # file as its backing file, unless that node was changed while the job |
| # was running. In that case, base's parent's backing (or filtered, |
| # whichever exists) child (i.e., base at the beginning of the job) |
| # will be the new backing file. |
| # |
| # On successful completion the image file is updated to drop the |
| # backing file and the BLOCK_JOB_COMPLETED event is emitted. |
| # |
| # In case @device is a filter node, block-stream modifies the first |
| # non-filter overlay node below it to point to the new backing node |
| # instead of modifying @device itself. |
| # |
| # @job-id: identifier for the newly-created block job. If omitted, |
| # the device name will be used. (Since 2.7) |
| # |
| # @device: the device or node name of the top image |
| # |
| # @base: the common backing file name. It cannot be set if @base-node |
| # or @bottom is also set. |
| # |
| # @base-node: the node name of the backing file. It cannot be set if |
| # @base or @bottom is also set. (Since 2.8) |
| # |
| # @bottom: the last node in the chain that should be streamed into |
| # top. It cannot be set if @base or @base-node is also set. It |
| # cannot be filter node. (Since 6.0) |
| # |
| # @backing-file: The backing file string to write into the top image. |
| # This filename is not validated. |
| # |
| # If a pathname string is such that it cannot be resolved by QEMU, |
| # that means that subsequent QMP or HMP commands must use |
| # node-names for the image in question, as filename lookup methods |
| # will fail. |
| # |
| # If not specified, QEMU will automatically determine the backing |
| # file string to use, or error out if there is no obvious choice. |
| # Care should be taken when specifying the string, to specify a |
| # valid filename or protocol. (Since 2.1) |
| # |
| # @backing-mask-protocol: If true, replace any protocol mentioned in |
| # the 'backing file format' with 'raw', rather than storing the |
| # protocol name as the backing format. Can be used even when no |
| # image header will be updated (default false; since 9.0). |
| # |
| # @speed: the maximum speed, in bytes per second |
| # |
| # @on-error: the action to take on an error (default report). 'stop' |
| # and 'enospc' can only be used if the block device supports |
| # io-status (see BlockInfo). (Since 1.3) |
| # |
| # @filter-node-name: the node name that should be assigned to the |
| # filter driver that the stream job inserts into the graph above |
| # @device. If this option is not given, a node name is |
| # autogenerated. (Since: 6.0) |
| # |
| # @auto-finalize: When false, this job will wait in a PENDING state |
| # after it has finished its work, waiting for @block-job-finalize |
| # before making any block graph changes. When true, this job will |
| # automatically perform its abort or commit actions. Defaults to |
| # true. (Since 3.1) |
| # |
| # @auto-dismiss: When false, this job will wait in a CONCLUDED state |
| # after it has completely ceased all work, and awaits |
| # @block-job-dismiss. When true, this job will automatically |
| # disappear from the query list without user intervention. |
| # Defaults to true. (Since 3.1) |
| # |
| # Errors: |
| # - If @device does not exist, DeviceNotFound. |
| # |
| # Since: 1.1 |
| # |
| # .. qmp-example:: |
| # |
| # -> { "execute": "block-stream", |
| # "arguments": { "device": "virtio0", |
| # "base": "/tmp/master.qcow2" } } |
| # <- { "return": {} } |
| ## |
| { 'command': 'block-stream', |
| 'data': { '*job-id': 'str', 'device': 'str', '*base': 'str', |
| '*base-node': 'str', '*backing-file': 'str', |
| '*backing-mask-protocol': 'bool', |
| '*bottom': 'str', |
| '*speed': 'int', '*on-error': 'BlockdevOnError', |
| '*filter-node-name': 'str', |
| '*auto-finalize': 'bool', '*auto-dismiss': 'bool' }, |
| 'allow-preconfig': true } |
| |
| ## |
| # @block-job-set-speed: |
| # |
| # Set maximum speed for a background block operation. |
| # |
| # This command can only be issued when there is an active block job. |
| # |
| # Throttling can be disabled by setting the speed to 0. |
| # |
| # @device: The job identifier. This used to be a device name (hence |
| # the name of the parameter), but since QEMU 2.7 it can have other |
| # values. |
| # |
| # @speed: the maximum speed, in bytes per second, or 0 for unlimited. |
| # Defaults to 0. |
| # |
| # Errors: |
| # - If no background operation is active on this device, |
| # DeviceNotActive |
| # |
| # Since: 1.1 |
| ## |
| { 'command': 'block-job-set-speed', |
| 'data': { 'device': 'str', 'speed': 'int' }, |
| 'allow-preconfig': true } |
| |
| ## |
| # @block-job-cancel: |
| # |
| # Stop an active background block operation. |
| # |
| # This command returns immediately after marking the active background |
| # block operation for cancellation. It is an error to call this |
| # command if no operation is in progress. |
| # |
| # The operation will cancel as soon as possible and then emit the |
| # BLOCK_JOB_CANCELLED event. Before that happens the job is still |
| # visible when enumerated using query-block-jobs. |
| # |
| # Note that if you issue 'block-job-cancel' after 'drive-mirror' has |
| # indicated (via the event BLOCK_JOB_READY) that the source and |
| # destination are synchronized, then the event triggered by this |
| # command changes to BLOCK_JOB_COMPLETED, to indicate that the |
| # mirroring has ended and the destination now has a point-in-time copy |
| # tied to the time of the cancellation. |
| # |
| # For streaming, the image file retains its backing file unless the |
| # streaming operation happens to complete just as it is being |
| # cancelled. A new streaming operation can be started at a later time |
| # to finish copying all data from the backing file. |
| # |
| # @device: The job identifier. This used to be a device name (hence |
| # the name of the parameter), but since QEMU 2.7 it can have other |
| # values. |
| # |
| # @force: If true, and the job has already emitted the event |
| # BLOCK_JOB_READY, abandon the job immediately (even if it is |
| # paused) instead of waiting for the destination to complete its |
| # final synchronization (since 1.3) |
| # |
| # Errors: |
| # - If no background operation is active on this device, |
| # DeviceNotActive |
| # |
| # Since: 1.1 |
| ## |
| { 'command': 'block-job-cancel', 'data': { 'device': 'str', '*force': 'bool' }, |
| 'allow-preconfig': true } |
| |
| ## |
| # @block-job-pause: |
| # |
| # Pause an active background block operation. |
| # |
| # This command returns immediately after marking the active background |
| # block operation for pausing. It is an error to call this command if |
| # no operation is in progress or if the job is already paused. |
| # |
| # The operation will pause as soon as possible. No event is emitted |
| # when the operation is actually paused. Cancelling a paused job |
| # automatically resumes it. |
| # |
| # @device: The job identifier. This used to be a device name (hence |
| # the name of the parameter), but since QEMU 2.7 it can have other |
| # values. |
| # |
| # Errors: |
| # - If no background operation is active on this device, |
| # DeviceNotActive |
| # |
| # Since: 1.3 |
| ## |
| { 'command': 'block-job-pause', 'data': { 'device': 'str' }, |
| 'allow-preconfig': true } |
| |
| ## |
| # @block-job-resume: |
| # |
| # Resume an active background block operation. |
| # |
| # This command returns immediately after resuming a paused background |
| # block operation. It is an error to call this command if no |
| # operation is in progress or if the job is not paused. |
| # |
| # This command also clears the error status of the job. |
| # |
| # @device: The job identifier. This used to be a device name (hence |
| # the name of the parameter), but since QEMU 2.7 it can have other |
| # values. |
| # |
| # Errors: |
| # - If no background operation is active on this device, |
| # DeviceNotActive |
| # |
| # Since: 1.3 |
| ## |
| { 'command': 'block-job-resume', 'data': { 'device': 'str' }, |
| 'allow-preconfig': true } |
| |
| ## |
| # @block-job-complete: |
| # |
| # Manually trigger completion of an active background block operation. |
| # This is supported for drive mirroring, where it also switches the |
| # device to write to the target path only. The ability to complete is |
| # signaled with a BLOCK_JOB_READY event. |
| # |
| # This command completes an active background block operation |
| # synchronously. The ordering of this command's return with the |
| # BLOCK_JOB_COMPLETED event is not defined. Note that if an I/O error |
| # occurs during the processing of this command: 1) the command itself |
| # will fail; 2) the error will be processed according to the |
| # rerror/werror arguments that were specified when starting the |
| # operation. |
| # |
| # A cancelled or paused job cannot be completed. |
| # |
| # @device: The job identifier. This used to be a device name (hence |
| # the name of the parameter), but since QEMU 2.7 it can have other |
| # values. |
| # |
| # Errors: |
| # - If no background operation is active on this device, |
| # DeviceNotActive |
| # |
| # Since: 1.3 |
| ## |
| { 'command': 'block-job-complete', 'data': { 'device': 'str' }, |
| 'allow-preconfig': true } |
| |
| ## |
| # @block-job-dismiss: |
| # |
| # For jobs that have already concluded, remove them from the |
| # block-job-query list. This command only needs to be run for jobs |
| # which were started with QEMU 2.12+ job lifetime management |
| # semantics. |
| # |
| # This command will refuse to operate on any job that has not yet |
| # reached its terminal state, JOB_STATUS_CONCLUDED. For jobs that |
| # make use of the BLOCK_JOB_READY event, block-job-cancel or |
| # block-job-complete will still need to be used as appropriate. |
| # |
| # @id: The job identifier. |
| # |
| # Since: 2.12 |
| ## |
| { 'command': 'block-job-dismiss', 'data': { 'id': 'str' }, |
| 'allow-preconfig': true } |
| |
| ## |
| # @block-job-finalize: |
| # |
| # Once a job that has manual=true reaches the pending state, it can be |
| # instructed to finalize any graph changes and do any necessary |
| # cleanup via this command. For jobs in a transaction, instructing |
| # one job to finalize will force ALL jobs in the transaction to |
| # finalize, so it is only necessary to instruct a single member job to |
| # finalize. |
| # |
| # @id: The job identifier. |
| # |
| # Since: 2.12 |
| ## |
| { 'command': 'block-job-finalize', 'data': { 'id': 'str' }, |
| 'allow-preconfig': true } |
| |
| ## |
| # @BlockJobChangeOptionsMirror: |
| # |
| # @copy-mode: Switch to this copy mode. Currently, only the switch |
| # from 'background' to 'write-blocking' is implemented. |
| # |
| # Since: 8.2 |
| ## |
| { 'struct': 'BlockJobChangeOptionsMirror', |
| 'data': { 'copy-mode' : 'MirrorCopyMode' } } |
| |
| ## |
| # @BlockJobChangeOptions: |
| # |
| # Block job options that can be changed after job creation. |
| # |
| # @id: The job identifier |
| # |
| # @type: The job type |
| # |
| # Since: 8.2 |
| ## |
| { 'union': 'BlockJobChangeOptions', |
| 'base': { 'id': 'str', 'type': 'JobType' }, |
| 'discriminator': 'type', |
| 'data': { 'mirror': 'BlockJobChangeOptionsMirror' } } |
| |
| ## |
| # @block-job-change: |
| # |
| # Change the block job's options. |
| # |
| # Since: 8.2 |
| ## |
| { 'command': 'block-job-change', |
| 'data': 'BlockJobChangeOptions', 'boxed': true } |
| |
| ## |
| # @BlockdevDiscardOptions: |
| # |
| # Determines how to handle discard requests. |
| # |
| # @ignore: Ignore the request |
| # |
| # @unmap: Forward as an unmap request |
| # |
| # Since: 2.9 |
| ## |
| { 'enum': 'BlockdevDiscardOptions', |
| 'data': [ 'ignore', 'unmap' ] } |
| |
| ## |
| # @BlockdevDetectZeroesOptions: |
| # |
| # Describes the operation mode for the automatic conversion of plain |
| # zero writes by the OS to driver specific optimized zero write |
| # commands. |
| # |
| # @off: Disabled (default) |
| # |
| # @on: Enabled |
| # |
| # @unmap: Enabled and even try to unmap blocks if possible. This |
| # requires also that @BlockdevDiscardOptions is set to unmap for |
| # this device. |
| # |
| # Since: 2.1 |
| ## |
| { 'enum': 'BlockdevDetectZeroesOptions', |
| 'data': [ 'off', 'on', 'unmap' ] } |
| |
| ## |
| # @BlockdevAioOptions: |
| # |
| # Selects the AIO backend to handle I/O requests |
| # |
| # @threads: Use qemu's thread pool |
| # |
| # @native: Use native AIO backend (only Linux and Windows) |
| # |
| # @io_uring: Use linux io_uring (since 5.0) |
| # |
| # Since: 2.9 |
| ## |
| { 'enum': 'BlockdevAioOptions', |
| 'data': [ 'threads', 'native', |
| { 'name': 'io_uring', 'if': 'CONFIG_LINUX_IO_URING' } ] } |
| |
| ## |
| # @BlockdevCacheOptions: |
| # |
| # Includes cache-related options for block devices |
| # |
| # @direct: enables use of O_DIRECT (bypass the host page cache; |
| # default: false) |
| # |
| # @no-flush: ignore any flush requests for the device (default: false) |
| # |
| # Since: 2.9 |
| ## |
| { 'struct': 'BlockdevCacheOptions', |
| 'data': { '*direct': 'bool', |
| '*no-flush': 'bool' } } |
| |
| ## |
| # @BlockdevDriver: |
| # |
| # Drivers that are supported in block device operations. |
| # |
| # @throttle: Since 2.11 |
| # |
| # @nvme: Since 2.12 |
| # |
| # @copy-on-read: Since 3.0 |
| # |
| # @blklogwrites: Since 3.0 |
| # |
| # @blkreplay: Since 4.2 |
| # |
| # @compress: Since 5.0 |
| # |
| # @copy-before-write: Since 6.2 |
| # |
| # @snapshot-access: Since 7.0 |
| # |
| # Since: 2.9 |
| ## |
| { 'enum': 'BlockdevDriver', |
| 'data': [ 'blkdebug', 'blklogwrites', 'blkreplay', 'blkverify', 'bochs', |
| 'cloop', 'compress', 'copy-before-write', 'copy-on-read', 'dmg', |
| 'file', 'snapshot-access', 'ftp', 'ftps', 'gluster', |
| {'name': 'host_cdrom', 'if': 'HAVE_HOST_BLOCK_DEVICE' }, |
| {'name': 'host_device', 'if': 'HAVE_HOST_BLOCK_DEVICE' }, |
| 'http', 'https', |
| { 'name': 'io_uring', 'if': 'CONFIG_BLKIO' }, |
| 'iscsi', |
| 'luks', 'nbd', 'nfs', 'null-aio', 'null-co', 'nvme', |
| { 'name': 'nvme-io_uring', 'if': 'CONFIG_BLKIO' }, |
| 'parallels', 'preallocate', 'qcow', 'qcow2', 'qed', 'quorum', |
| 'raw', 'rbd', |
| { 'name': 'replication', 'if': 'CONFIG_REPLICATION' }, |
| 'ssh', 'throttle', 'vdi', 'vhdx', |
| { 'name': 'virtio-blk-vfio-pci', 'if': 'CONFIG_BLKIO' }, |
| { 'name': 'virtio-blk-vhost-user', 'if': 'CONFIG_BLKIO' }, |
| { 'name': 'virtio-blk-vhost-vdpa', 'if': 'CONFIG_BLKIO' }, |
| 'vmdk', 'vpc', 'vvfat' ] } |
| |
| ## |
| # @BlockdevOptionsFile: |
| # |
| # Driver specific block device options for the file backend. |
| # |
| # @filename: path to the image file |
| # |
| # @pr-manager: the id for the object that will handle persistent |
| # reservations for this device (default: none, forward the |
| # commands via SG_IO; since 2.11) |
| # |
| # @aio: AIO backend (default: threads) (since: 2.8) |
| # |
| # @aio-max-batch: maximum number of requests to batch together into a |
| # single submission in the AIO backend. The smallest value |
| # between this and the aio-max-batch value of the IOThread object |
| # is chosen. 0 means that the AIO backend will handle it |
| # automatically. (default: 0, since 6.2) |
| # |
| # @locking: whether to enable file locking. If set to 'auto', only |
| # enable when Open File Descriptor (OFD) locking API is available |
| # (default: auto, since 2.10) |
| # |
| # @drop-cache: invalidate page cache during live migration. This |
| # prevents stale data on the migration destination with |
| # cache.direct=off. Currently only supported on Linux hosts. |
| # (default: on, since: 4.0) |
| # |
| # @x-check-cache-dropped: whether to check that page cache was dropped |
| # on live migration. May cause noticeable delays if the image |
| # file is large, do not use in production. (default: off) |
| # (since: 3.0) |
| # |
| # Features: |
| # |
| # @dynamic-auto-read-only: If present, enabled auto-read-only means |
| # that the driver will open the image read-only at first, |
| # dynamically reopen the image file read-write when the first |
| # writer is attached to the node and reopen read-only when the |
| # last writer is detached. This allows giving QEMU write |
| # permissions only on demand when an operation actually needs |
| # write access. |
| # |
| # @unstable: Member x-check-cache-dropped is meant for debugging. |
| # |
| # Since: 2.9 |
| ## |
| { 'struct': 'BlockdevOptionsFile', |
| 'data': { 'filename': 'str', |
| '*pr-manager': 'str', |
| '*locking': 'OnOffAuto', |
| '*aio': 'BlockdevAioOptions', |
| '*aio-max-batch': 'int', |
| '*drop-cache': {'type': 'bool', |
| 'if': 'CONFIG_LINUX'}, |
| '*x-check-cache-dropped': { 'type': 'bool', |
| 'features': [ 'unstable' ] } }, |
| 'features': [ { 'name': 'dynamic-auto-read-only', |
| 'if': 'CONFIG_POSIX' } ] } |
| |
| ## |
| # @BlockdevOptionsNull: |
| # |
| # Driver specific block device options for the null backend. |
| # |
| # @size: size of the device in bytes. |
| # |
| # @latency-ns: emulated latency (in nanoseconds) in processing |
| # requests. Default to zero which completes requests immediately. |
| # (Since 2.4) |
| # |
| # @read-zeroes: if true, reads from the device produce zeroes; if |
| # false, the buffer is left unchanged. |
| # (default: false; since: 4.1) |
| # |
| # Since: 2.9 |
| ## |
| { 'struct': 'BlockdevOptionsNull', |
| 'data': { '*size': 'int', '*latency-ns': 'uint64', '*read-zeroes': 'bool' } } |
| |
| ## |
| # @BlockdevOptionsNVMe: |
| # |
| # Driver specific block device options for the NVMe backend. |
| # |
| # @device: PCI controller address of the NVMe device in format |
| # hhhh:bb:ss.f (host:bus:slot.function) |
| # |
| # @namespace: namespace number of the device, starting from 1. |
| # |
| # Note that the PCI @device must have been unbound from any host |
| # kernel driver before instructing QEMU to add the blockdev. |
| # |
| # Since: 2.12 |
| ## |
| { 'struct': 'BlockdevOptionsNVMe', |
| 'data': { 'device': 'str', 'namespace': 'int' } } |
| |
| ## |
| # @BlockdevOptionsVVFAT: |
| # |
| # Driver specific block device options for the vvfat protocol. |
| # |
| # @dir: directory to be exported as FAT image |
| # |
| # @fat-type: FAT type: 12, 16 or 32 |
| # |
| # @floppy: whether to export a floppy image (true) or partitioned hard |
| # disk (false; default) |
| # |
| # @label: set the volume label, limited to 11 bytes. FAT16 and FAT32 |
| # traditionally have some restrictions on labels, which are |
| # ignored by most operating systems. Defaults to "QEMU VVFAT". |
| # (since 2.4) |
| # |
| # @rw: whether to allow write operations (default: false) |
| # |
| # Since: 2.9 |
| ## |
| { 'struct': 'BlockdevOptionsVVFAT', |
| 'data': { 'dir': 'str', '*fat-type': 'int', '*floppy': 'bool', |
| '*label': 'str', '*rw': 'bool' } } |
| |
| ## |
| # @BlockdevOptionsGenericFormat: |
| # |
| # Driver specific block device options for image format that have no |
| # option besides their data source. |
| # |
| # @file: reference to or definition of the data source block device |
| # |
| # Since: 2.9 |
| ## |
| { 'struct': 'BlockdevOptionsGenericFormat', |
| 'data': { 'file': 'BlockdevRef' } } |
| |
| ## |
| # @BlockdevOptionsLUKS: |
| # |
| # Driver specific block device options for LUKS. |
| # |
| # @key-secret: the ID of a QCryptoSecret object providing the |
| # decryption key (since 2.6). Mandatory except when doing a |
| # metadata-only probe of the image. |
| # |
| # @header: block device holding a detached LUKS header. (since 9.0) |
| # |
| # Since: 2.9 |
| ## |
| { 'struct': 'BlockdevOptionsLUKS', |
| 'base': 'BlockdevOptionsGenericFormat', |
| 'data': { '*key-secret': 'str', |
| '*header': 'BlockdevRef'} } |
| |
| ## |
| # @BlockdevOptionsGenericCOWFormat: |
| # |
| # Driver specific block device options for image format that have no |
| # option besides their data source and an optional backing file. |
| # |
| # @backing: reference to or definition of the backing file block |
| # device, null disables the backing file entirely. Defaults to |
| # the backing file stored the image file. |
| # |
| # Since: 2.9 |
| ## |
| { 'struct': 'BlockdevOptionsGenericCOWFormat', |
| 'base': 'BlockdevOptionsGenericFormat', |
| 'data': { '*backing': 'BlockdevRefOrNull' } } |
| |
| ## |
| # @Qcow2OverlapCheckMode: |
| # |
| # General overlap check modes. |
| # |
| # @none: Do not perform any checks |
| # |
| # @constant: Perform only checks which can be done in constant time |
| # and without reading anything from disk |
| # |
| # @cached: Perform only checks which can be done without reading |
| # anything from disk |
| # |
| # @all: Perform all available overlap checks |
| # |
| # Since: 2.9 |
| ## |
| { 'enum': 'Qcow2OverlapCheckMode', |
| 'data': [ 'none', 'constant', 'cached', 'all' ] } |
| |
| ## |
| # @Qcow2OverlapCheckFlags: |
| # |
| # Structure of flags for each metadata structure. Setting a field to |
| # 'true' makes QEMU guard that Qcow2 format structure against |
| # unintended overwriting. See Qcow2 format specification for detailed |
| # information on these structures. The default value is chosen |
| # according to the template given. |
| # |
| # @template: Specifies a template mode which can be adjusted using the |
| # other flags, defaults to 'cached' |
| # |
| # @main-header: Qcow2 format header |
| # |
| # @active-l1: Qcow2 active L1 table |
| # |
| # @active-l2: Qcow2 active L2 table |
| # |
| # @refcount-table: Qcow2 refcount table |
| # |
| # @refcount-block: Qcow2 refcount blocks |
| # |
| # @snapshot-table: Qcow2 snapshot table |
| # |
| # @inactive-l1: Qcow2 inactive L1 tables |
| # |
| # @inactive-l2: Qcow2 inactive L2 tables |
| # |
| # @bitmap-directory: Qcow2 bitmap directory (since 3.0) |
| # |
| # Since: 2.9 |
| ## |
| { 'struct': 'Qcow2OverlapCheckFlags', |
| 'data': { '*template': 'Qcow2OverlapCheckMode', |
| '*main-header': 'bool', |
| '*active-l1': 'bool', |
| '*active-l2': 'bool', |
| '*refcount-table': 'bool', |
| '*refcount-block': 'bool', |
| '*snapshot-table': 'bool', |
| '*inactive-l1': 'bool', |
| '*inactive-l2': 'bool', |
| '*bitmap-directory': 'bool' } } |
| |
| ## |
| # @Qcow2OverlapChecks: |
| # |
| # Specifies which metadata structures should be guarded against |
| # unintended overwriting. |
| # |
| # @flags: set of flags for separate specification of each metadata |
| # structure type |
| # |
| # @mode: named mode which chooses a specific set of flags |
| # |
| # Since: 2.9 |
| ## |
| { 'alternate': 'Qcow2OverlapChecks', |
| 'data': { 'flags': 'Qcow2OverlapCheckFlags', |
| 'mode': 'Qcow2OverlapCheckMode' } } |
| |
| ## |
| # @BlockdevQcowEncryptionFormat: |
| # |
| # @aes: AES-CBC with plain64 initialization vectors |
| # |
| # Since: 2.10 |
| ## |
| { 'enum': 'BlockdevQcowEncryptionFormat', |
| 'data': [ 'aes' ] } |
| |
| ## |
| # @BlockdevQcowEncryption: |
| # |
| # @format: encryption format |
| # |
| # Since: 2.10 |
| ## |
| { 'union': 'BlockdevQcowEncryption', |
| 'base': { 'format': 'BlockdevQcowEncryptionFormat' }, |
| 'discriminator': 'format', |
| 'data': { 'aes': 'QCryptoBlockOptionsQCow' } } |
| |
| ## |
| # @BlockdevOptionsQcow: |
| # |
| # Driver specific block device options for qcow. |
| # |
| # @encrypt: Image decryption options. Mandatory for encrypted images, |
| # except when doing a metadata-only probe of the image. |
| # |
| # Since: 2.10 |
| ## |
| { 'struct': 'BlockdevOptionsQcow', |
| 'base': 'BlockdevOptionsGenericCOWFormat', |
| 'data': { '*encrypt': 'BlockdevQcowEncryption' } } |
| |
| ## |
| # @BlockdevQcow2EncryptionFormat: |
| # |
| # @aes: AES-CBC with plain64 initialization vectors |
| # |
| # Since: 2.10 |
| ## |
| { 'enum': 'BlockdevQcow2EncryptionFormat', |
| 'data': [ 'aes', 'luks' ] } |
| |
| ## |
| # @BlockdevQcow2Encryption: |
| # |
| # @format: encryption format |
| # |
| # Since: 2.10 |
| ## |
| { 'union': 'BlockdevQcow2Encryption', |
| 'base': { 'format': 'BlockdevQcow2EncryptionFormat' }, |
| 'discriminator': 'format', |
| 'data': { 'aes': 'QCryptoBlockOptionsQCow', |
| 'luks': 'QCryptoBlockOptionsLUKS'} } |
| |
| ## |
| # @BlockdevOptionsPreallocate: |
| # |
| # Filter driver intended to be inserted between format and protocol |
| # node and do preallocation in protocol node on write. |
| # |
| # @prealloc-align: on preallocation, align file length to this number, |
| # default 1048576 (1M) |
| # |
| # @prealloc-size: how much to preallocate, default 134217728 (128M) |
| # |
| # Since: 6.0 |
| ## |
| { 'struct': 'BlockdevOptionsPreallocate', |
| 'base': 'BlockdevOptionsGenericFormat', |
| 'data': { '*prealloc-align': 'int', '*prealloc-size': 'int' } } |
| |
| ## |
| # @BlockdevOptionsQcow2: |
| # |
| # Driver specific block device options for qcow2. |
| # |
| # @lazy-refcounts: whether to enable the lazy refcounts feature |
| # (default is taken from the image file) |
| # |
| # @pass-discard-request: whether discard requests to the qcow2 device |
| # should be forwarded to the data source |
| # |
| # @pass-discard-snapshot: whether discard requests for the data source |
| # should be issued when a snapshot operation (e.g. deleting a |
| # snapshot) frees clusters in the qcow2 file |
| # |
| # @pass-discard-other: whether discard requests for the data source |
| # should be issued on other occasions where a cluster gets freed |
| # |
| # @discard-no-unref: when enabled, data clusters will remain |
| # preallocated when they are no longer used, e.g. because they are |
| # discarded or converted to zero clusters. As usual, whether the |
| # old data is discarded or kept on the protocol level (i.e. in the |
| # image file) depends on the setting of the pass-discard-request |
| # option. Keeping the clusters preallocated prevents qcow2 |
| # fragmentation that would otherwise be caused by freeing and |
| # re-allocating them later. Besides potential performance |
| # degradation, such fragmentation can lead to increased allocation |
| # of clusters past the end of the image file, resulting in image |
| # files whose file length can grow much larger than their guest |
| # disk size would suggest. If image file length is of concern |
| # (e.g. when storing qcow2 images directly on block devices), you |
| # should consider enabling this option. (since 8.1) |
| # |
| # @overlap-check: which overlap checks to perform for writes to the |
| # image, defaults to 'cached' (since 2.2) |
| # |
| # @cache-size: the maximum total size of the L2 table and refcount |
| # block caches in bytes (since 2.2) |
| # |
| # @l2-cache-size: the maximum size of the L2 table cache in bytes |
| # (since 2.2) |
| # |
| # @l2-cache-entry-size: the size of each entry in the L2 cache in |
| # bytes. It must be a power of two between 512 and the cluster |
| # size. The default value is the cluster size (since 2.12) |
| # |
| # @refcount-cache-size: the maximum size of the refcount block cache |
| # in bytes (since 2.2) |
| # |
| # @cache-clean-interval: clean unused entries in the L2 and refcount |
| # caches. The interval is in seconds. The default value is 600 |
| # on supporting platforms, and 0 on other platforms. 0 disables |
| # this feature. (since 2.5) |
| # |
| # @encrypt: Image decryption options. Mandatory for encrypted images, |
| # except when doing a metadata-only probe of the image. (since |
| # 2.10) |
| # |
| # @data-file: reference to or definition of the external data file. |
| # This may only be specified for images that require an external |
| # data file. If it is not specified for such an image, the data |
| # file name is loaded from the image file. (since 4.0) |
| # |
| # Since: 2.9 |
| ## |
| { 'struct': 'BlockdevOptionsQcow2', |
| 'base': 'BlockdevOptionsGenericCOWFormat', |
| 'data': { '*lazy-refcounts': 'bool', |
| '*pass-discard-request': 'bool', |
| '*pass-discard-snapshot': 'bool', |
| '*pass-discard-other': 'bool', |
| '*discard-no-unref': 'bool', |
| '*overlap-check': 'Qcow2OverlapChecks', |
| '*cache-size': 'int', |
| '*l2-cache-size': 'int', |
| '*l2-cache-entry-size': 'int', |
| '*refcount-cache-size': 'int', |
| '*cache-clean-interval': 'int', |
| '*encrypt': 'BlockdevQcow2Encryption', |
| '*data-file': 'BlockdevRef' } } |
| |
| ## |
| # @SshHostKeyCheckMode: |
| # |
| # @none: Don't check the host key at all |
| # |
| # @hash: Compare the host key with a given hash |
| # |
| # @known_hosts: Check the host key against the known_hosts file |
| # |
| # Since: 2.12 |
| ## |
| { 'enum': 'SshHostKeyCheckMode', |
| 'data': [ 'none', 'hash', 'known_hosts' ] } |
| |
| ## |
| # @SshHostKeyCheckHashType: |
| # |
| # @md5: The given hash is an md5 hash |
| # |
| # @sha1: The given hash is an sha1 hash |
| # |
| # @sha256: The given hash is an sha256 hash |
| # |
| # Since: 2.12 |
| ## |
| { 'enum': 'SshHostKeyCheckHashType', |
| 'data': [ 'md5', 'sha1', 'sha256' ] } |
| |
| ## |
| # @SshHostKeyHash: |
| # |
| # @type: The hash algorithm used for the hash |
| # |
| # @hash: The expected hash value |
| # |
| # Since: 2.12 |
| ## |
| { 'struct': 'SshHostKeyHash', |
| 'data': { 'type': 'SshHostKeyCheckHashType', |
| 'hash': 'str' }} |
| |
| ## |
| # @SshHostKeyCheck: |
| # |
| # @mode: How to check the host key |
| # |
| # Since: 2.12 |
| ## |
| { 'union': 'SshHostKeyCheck', |
| 'base': { 'mode': 'SshHostKeyCheckMode' }, |
| 'discriminator': 'mode', |
| 'data': { 'hash': 'SshHostKeyHash' } } |
| |
| ## |
| # @BlockdevOptionsSsh: |
| # |
| # @server: host address |
| # |
| # @path: path to the image on the host |
| # |
| # @user: user as which to connect, defaults to current local user name |
| # |
| # @host-key-check: Defines how and what to check the host key against |
| # (default: known_hosts) |
| # |
| # Since: 2.9 |
| ## |
| { 'struct': 'BlockdevOptionsSsh', |
| 'data': { 'server': 'InetSocketAddress', |
| 'path': 'str', |
| '*user': 'str', |
| '*host-key-check': 'SshHostKeyCheck' } } |
| |
| ## |
| # @BlkdebugEvent: |
| # |
| # Trigger events supported by blkdebug. |
| # |
| # @l1_shrink_write_table: write zeros to the l1 table to shrink image. |
| # (since 2.11) |
| # |
| # @l1_shrink_free_l2_clusters: discard the l2 tables. (since 2.11) |
| # |
| # @cor_write: a write due to copy-on-read (since 2.11) |
| # |
| # @cluster_alloc_space: an allocation of file space for a cluster |
| # (since 4.1) |
| # |
| # @none: triggers once at creation of the blkdebug node (since 4.1) |
| # |
| # Since: 2.9 |
| ## |
| { 'enum': 'BlkdebugEvent', 'prefix': 'BLKDBG', |
| 'data': [ 'l1_update', 'l1_grow_alloc_table', 'l1_grow_write_table', |
| 'l1_grow_activate_table', 'l2_load', 'l2_update', |
| 'l2_update_compressed', 'l2_alloc_cow_read', 'l2_alloc_write', |
| 'read_aio', 'read_backing_aio', 'read_compressed', 'write_aio', |
| 'write_compressed', 'vmstate_load', 'vmstate_save', 'cow_read', |
| 'cow_write', 'reftable_load', 'reftable_grow', 'reftable_update', |
| 'refblock_load', 'refblock_update', 'refblock_update_part', |
| 'refblock_alloc', 'refblock_alloc_hookup', 'refblock_alloc_write', |
| 'refblock_alloc_write_blocks', 'refblock_alloc_write_table', |
| 'refblock_alloc_switch_table', 'cluster_alloc', |
| 'cluster_alloc_bytes', 'cluster_free', 'flush_to_os', |
| 'flush_to_disk', 'pwritev_rmw_head', 'pwritev_rmw_after_head', |
| 'pwritev_rmw_tail', 'pwritev_rmw_after_tail', 'pwritev', |
| 'pwritev_zero', 'pwritev_done', 'empty_image_prepare', |
| 'l1_shrink_write_table', 'l1_shrink_free_l2_clusters', |
| 'cor_write', 'cluster_alloc_space', 'none'] } |
| |
| ## |
| # @BlkdebugIOType: |
| # |
| # Kinds of I/O that blkdebug can inject errors in. |
| # |
| # @read: .bdrv_co_preadv() |
| # |
| # @write: .bdrv_co_pwritev() |
| # |
| # @write-zeroes: .bdrv_co_pwrite_zeroes() |
| # |
| # @discard: .bdrv_co_pdiscard() |
| # |
| # @flush: .bdrv_co_flush_to_disk() |
| # |
| # @block-status: .bdrv_co_block_status() |
| # |
| # Since: 4.1 |
| ## |
| { 'enum': 'BlkdebugIOType', 'prefix': 'BLKDEBUG_IO_TYPE', |
| 'data': [ 'read', 'write', 'write-zeroes', 'discard', 'flush', |
| 'block-status' ] } |
| |
| ## |
| # @BlkdebugInjectErrorOptions: |
| # |
| # Describes a single error injection for blkdebug. |
| # |
| # @event: trigger event |
| # |
| # @state: the state identifier blkdebug needs to be in to actually |
| # trigger the event; defaults to "any" |
| # |
| # @iotype: the type of I/O operations on which this error should be |
| # injected; defaults to "all read, write, write-zeroes, discard, |
| # and flush operations" (since: 4.1) |
| # |
| # @errno: error identifier (errno) to be returned; defaults to EIO |
| # |
| # @sector: specifies the sector index which has to be affected in |
| # order to actually trigger the event; defaults to "any sector" |
| # |
| # @once: disables further events after this one has been triggered; |
| # defaults to false |
| # |
| # @immediately: fail immediately; defaults to false |
| # |
| # Since: 2.9 |
| ## |
| { 'struct': 'BlkdebugInjectErrorOptions', |
| 'data': { 'event': 'BlkdebugEvent', |
| '*state': 'int', |
| '*iotype': 'BlkdebugIOType', |
| '*errno': 'int', |
| '*sector': 'int', |
| '*once': 'bool', |
| '*immediately': 'bool' } } |
| |
| ## |
| # @BlkdebugSetStateOptions: |
| # |
| # Describes a single state-change event for blkdebug. |
| # |
| # @event: trigger event |
| # |
| # @state: the current state identifier blkdebug needs to be in; |
| # defaults to "any" |
| # |
| # @new_state: the state identifier blkdebug is supposed to assume if |
| # this event is triggered |
| # |
| # Since: 2.9 |
| ## |
| { 'struct': 'BlkdebugSetStateOptions', |
| 'data': { 'event': 'BlkdebugEvent', |
| '*state': 'int', |
| 'new_state': 'int' } } |
| |
| ## |
| # @BlockdevOptionsBlkdebug: |
| # |
| # Driver specific block device options for blkdebug. |
| # |
| # @image: underlying raw block device (or image file) |
| # |
| # @config: filename of the configuration file |
| # |
| # @align: required alignment for requests in bytes, must be positive |
| # power of 2, or 0 for default |
| # |
| # @max-transfer: maximum size for I/O transfers in bytes, must be |
| # positive multiple of @align and of the underlying file's request |
| # alignment (but need not be a power of 2), or 0 for default |
| # (since 2.10) |
| # |
| # @opt-write-zero: preferred alignment for write zero requests in |
| # bytes, must be positive multiple of @align and of the underlying |
| # file's request alignment (but need not be a power of 2), or 0 |
| # for default (since 2.10) |
| # |
| # @max-write-zero: maximum size for write zero requests in bytes, must |
| # be positive multiple of @align, of @opt-write-zero, and of the |
| # underlying file's request alignment (but need not be a power of |
| # 2), or 0 for default (since 2.10) |
| # |
| # @opt-discard: preferred alignment for discard requests in bytes, |
| # must be positive multiple of @align and of the underlying file's |
| # request alignment (but need not be a power of 2), or 0 for |
| # default (since 2.10) |
| # |
| # @max-discard: maximum size for discard requests in bytes, must be |
| # positive multiple of @align, of @opt-discard, and of the |
| # underlying file's request alignment (but need not be a power of |
| # 2), or 0 for default (since 2.10) |
| # |
| # @inject-error: array of error injection descriptions |
| # |
| # @set-state: array of state-change descriptions |
| # |
| # @take-child-perms: Permissions to take on @image in addition to what |
| # is necessary anyway (which depends on how the blkdebug node is |
| # used). Defaults to none. (since 5.0) |
| # |
| # @unshare-child-perms: Permissions not to share on @image in addition |
| # to what cannot be shared anyway (which depends on how the |
| # blkdebug node is used). Defaults to none. (since 5.0) |
| # |
| # Since: 2.9 |
| ## |
| { 'struct': 'BlockdevOptionsBlkdebug', |
| 'data': { 'image': 'BlockdevRef', |
| '*config': 'str', |
| '*align': 'int', '*max-transfer': 'int32', |
| '*opt-write-zero': 'int32', '*max-write-zero': 'int32', |
| '*opt-discard': 'int32', '*max-discard': 'int32', |
| '*inject-error': ['BlkdebugInjectErrorOptions'], |
| '*set-state': ['BlkdebugSetStateOptions'], |
| '*take-child-perms': ['BlockPermission'], |
| '*unshare-child-perms': ['BlockPermission'] } } |
| |
| ## |
| # @BlockdevOptionsBlklogwrites: |
| # |
| # Driver specific block device options for blklogwrites. |
| # |
| # @file: block device |
| # |
| # @log: block device used to log writes to @file |
| # |
| # @log-sector-size: sector size used in logging writes to @file, |
| # determines granularity of offsets and sizes of writes |
| # (default: 512) |
| # |
| # @log-append: append to an existing log (default: false) |
| # |
| # @log-super-update-interval: interval of write requests after which |
| # the log super block is updated to disk (default: 4096) |
| # |
| # Since: 3.0 |
| ## |
| { 'struct': 'BlockdevOptionsBlklogwrites', |
| 'data': { 'file': 'BlockdevRef', |
| 'log': 'BlockdevRef', |
| '*log-sector-size': 'uint32', |
| '*log-append': 'bool', |
| '*log-super-update-interval': 'uint64' } } |
| |
| ## |
| # @BlockdevOptionsBlkverify: |
| # |
| # Driver specific block device options for blkverify. |
| # |
| # @test: block device to be tested |
| # |
| # @raw: raw image used for verification |
| # |
| # Since: 2.9 |
| ## |
| { 'struct': 'BlockdevOptionsBlkverify', |
| 'data': { 'test': 'BlockdevRef', |
| 'raw': 'BlockdevRef' } } |
| |
| ## |
| # @BlockdevOptionsBlkreplay: |
| # |
| # Driver specific block device options for blkreplay. |
| # |
| # @image: disk image which should be controlled with blkreplay |
| # |
| # Since: 4.2 |
| ## |
| { 'struct': 'BlockdevOptionsBlkreplay', |
| 'data': { 'image': 'BlockdevRef' } } |
| |
| ## |
| # @QuorumReadPattern: |
| # |
| # An enumeration of quorum read patterns. |
| # |
| # @quorum: read all the children and do a quorum vote on reads |
| # |
| # @fifo: read only from the first child that has not failed |
| # |
| # Since: 2.9 |
| ## |
| { 'enum': 'QuorumReadPattern', 'data': [ 'quorum', 'fifo' ] } |
| |
| ## |
| # @BlockdevOptionsQuorum: |
| # |
| # Driver specific block device options for Quorum |
| # |
| # @blkverify: true if the driver must print content mismatch set to |
| # false by default |
| # |
| # @children: the children block devices to use |
| # |
| # @vote-threshold: the vote limit under which a read will fail |
| # |
| # @rewrite-corrupted: rewrite corrupted data when quorum is reached |
| # (Since 2.1) |
| # |
| # @read-pattern: choose read pattern and set to quorum by default |
| # (Since 2.2) |
| # |
| # Since: 2.9 |
| ## |
| { 'struct': 'BlockdevOptionsQuorum', |
| 'data': { '*blkverify': 'bool', |
| 'children': [ 'BlockdevRef' ], |
| 'vote-threshold': 'int', |
| '*rewrite-corrupted': 'bool', |
| '*read-pattern': 'QuorumReadPattern' } } |
| |
| ## |
| # @BlockdevOptionsGluster: |
| # |
| # Driver specific block device options for Gluster |
| # |
| # @volume: name of gluster volume where VM image resides |
| # |
| # @path: absolute path to image file in gluster volume |
| # |
| # @server: gluster servers description |
| # |
| # @debug: libgfapi log level (default '4' which is Error) (Since 2.8) |
| # |
| # @logfile: libgfapi log file (default /dev/stderr) (Since 2.8) |
| # |
| # Since: 2.9 |
| ## |
| { 'struct': 'BlockdevOptionsGluster', |
| 'data': { 'volume': 'str', |
| 'path': 'str', |
| 'server': ['SocketAddress'], |
| '*debug': 'int', |
| '*logfile': 'str' } } |
| |
| ## |
| # @BlockdevOptionsIoUring: |
| # |
| # Driver specific block device options for the io_uring backend. |
| # |
| # @filename: path to the image file |
| # |
| # Since: 7.2 |
| ## |
| { 'struct': 'BlockdevOptionsIoUring', |
| 'data': { 'filename': 'str' }, |
| 'if': 'CONFIG_BLKIO' } |
| |
| ## |
| # @BlockdevOptionsNvmeIoUring: |
| # |
| # Driver specific block device options for the nvme-io_uring backend. |
| # |
| # @path: path to the NVMe namespace's character device (e.g. |
| # /dev/ng0n1). |
| # |
| # Since: 7.2 |
| ## |
| { 'struct': 'BlockdevOptionsNvmeIoUring', |
| 'data': { 'path': 'str' }, |
| 'if': 'CONFIG_BLKIO' } |
| |
| ## |
| # @BlockdevOptionsVirtioBlkVfioPci: |
| # |
| # Driver specific block device options for the virtio-blk-vfio-pci |
| # backend. |
| # |
| # @path: path to the PCI device's sysfs directory (e.g. |
| # /sys/bus/pci/devices/0000:00:01.0). |
| # |
| # Since: 7.2 |
| ## |
| { 'struct': 'BlockdevOptionsVirtioBlkVfioPci', |
| 'data': { 'path': 'str' }, |
| 'if': 'CONFIG_BLKIO' } |
| |
| ## |
| # @BlockdevOptionsVirtioBlkVhostUser: |
| # |
| # Driver specific block device options for the virtio-blk-vhost-user |
| # backend. |
| # |
| # @path: path to the vhost-user UNIX domain socket. |
| # |
| # Since: 7.2 |
| ## |
| { 'struct': 'BlockdevOptionsVirtioBlkVhostUser', |
| 'data': { 'path': 'str' }, |
| 'if': 'CONFIG_BLKIO' } |
| |
| ## |
| # @BlockdevOptionsVirtioBlkVhostVdpa: |
| # |
| # Driver specific block device options for the virtio-blk-vhost-vdpa |
| # backend. |
| # |
| # @path: path to the vhost-vdpa character device. |
| # |
| # Features: |
| # |
| # @fdset: Member @path supports the special "/dev/fdset/N" path |
| # (since 8.1) |
| # |
| # Since: 7.2 |
| ## |
| { 'struct': 'BlockdevOptionsVirtioBlkVhostVdpa', |
| 'data': { 'path': 'str' }, |
| 'features': [ { 'name' :'fdset', |
| 'if': 'CONFIG_BLKIO_VHOST_VDPA_FD' } ], |
| 'if': 'CONFIG_BLKIO' } |
| |
| ## |
| # @IscsiTransport: |
| # |
| # An enumeration of libiscsi transport types |
| # |
| # Since: 2.9 |
| ## |
| { 'enum': 'IscsiTransport', |
| 'data': [ 'tcp', 'iser' ] } |
| |
| ## |
| # @IscsiHeaderDigest: |
| # |
| # An enumeration of header digests supported by libiscsi |
| # |
| # Since: 2.9 |
| ## |
| { 'enum': 'IscsiHeaderDigest', |
| 'prefix': 'QAPI_ISCSI_HEADER_DIGEST', |
| 'data': [ 'crc32c', 'none', 'crc32c-none', 'none-crc32c' ] } |
| |
| ## |
| # @BlockdevOptionsIscsi: |
| # |
| # Driver specific block device options for iscsi |
| # |
| # @transport: The iscsi transport type |
| # |
| # @portal: The address of the iscsi portal |
| # |
| # @target: The target iqn name |
| # |
| # @lun: LUN to connect to. Defaults to 0. |
| # |
| # @user: User name to log in with. If omitted, no CHAP authentication |
| # is performed. |
| # |
| # @password-secret: The ID of a QCryptoSecret object providing the |
| # password for the login. This option is required if @user is |
| # specified. |
| # |
| # @initiator-name: The iqn name we want to identify to the target as. |
| # If this option is not specified, an initiator name is generated |
| # automatically. |
| # |
| # @header-digest: The desired header digest. Defaults to none-crc32c. |
| # |
| # @timeout: Timeout in seconds after which a request will timeout. 0 |
| # means no timeout and is the default. |
| # |
| # Since: 2.9 |
| ## |
| { 'struct': 'BlockdevOptionsIscsi', |
| 'data': { 'transport': 'IscsiTransport', |
| 'portal': 'str', |
| 'target': 'str', |
| '*lun': 'int', |
| '*user': 'str', |
| '*password-secret': 'str', |
| '*initiator-name': 'str', |
| '*header-digest': 'IscsiHeaderDigest', |
| '*timeout': 'int' } } |
| |
| ## |
| # @RbdAuthMode: |
| # |
| # Since: 3.0 |
| ## |
| { 'enum': 'RbdAuthMode', |
| 'data': [ 'cephx', 'none' ] } |
| |
| ## |
| # @RbdImageEncryptionFormat: |
| # |
| # @luks-any: Used for opening either luks or luks2 (Since 8.0) |
| # |
| # Since: 6.1 |
| ## |
| { 'enum': 'RbdImageEncryptionFormat', |
| 'data': [ 'luks', 'luks2', 'luks-any' ] } |
| |
| ## |
| # @RbdEncryptionOptionsLUKSBase: |
| # |
| # @key-secret: ID of a QCryptoSecret object providing a passphrase for |
| # unlocking the encryption |
| # |
| # Since: 6.1 |
| ## |
| { 'struct': 'RbdEncryptionOptionsLUKSBase', |
| 'data': { 'key-secret': 'str' } } |
| |
| ## |
| # @RbdEncryptionCreateOptionsLUKSBase: |
| # |
| # @cipher-alg: The encryption algorithm |
| # |
| # Since: 6.1 |
| ## |
| { 'struct': 'RbdEncryptionCreateOptionsLUKSBase', |
| 'base': 'RbdEncryptionOptionsLUKSBase', |
| 'data': { '*cipher-alg': 'QCryptoCipherAlgorithm' } } |
| |
| ## |
| # @RbdEncryptionOptionsLUKS: |
| # |
| # Since: 6.1 |
| ## |
| { 'struct': 'RbdEncryptionOptionsLUKS', |
| 'base': 'RbdEncryptionOptionsLUKSBase', |
| 'data': { } } |
| |
| ## |
| # @RbdEncryptionOptionsLUKS2: |
| # |
| # Since: 6.1 |
| ## |
| { 'struct': 'RbdEncryptionOptionsLUKS2', |
| 'base': 'RbdEncryptionOptionsLUKSBase', |
| 'data': { } } |
| |
| ## |
| # @RbdEncryptionOptionsLUKSAny: |
| # |
| # Since: 8.0 |
| ## |
| { 'struct': 'RbdEncryptionOptionsLUKSAny', |
| 'base': 'RbdEncryptionOptionsLUKSBase', |
| 'data': { } } |
| |
| ## |
| # @RbdEncryptionCreateOptionsLUKS: |
| # |
| # Since: 6.1 |
| ## |
| { 'struct': 'RbdEncryptionCreateOptionsLUKS', |
| 'base': 'RbdEncryptionCreateOptionsLUKSBase', |
| 'data': { } } |
| |
| ## |
| # @RbdEncryptionCreateOptionsLUKS2: |
| # |
| # Since: 6.1 |
| ## |
| { 'struct': 'RbdEncryptionCreateOptionsLUKS2', |
| 'base': 'RbdEncryptionCreateOptionsLUKSBase', |
| 'data': { } } |
| |
| ## |
| # @RbdEncryptionOptions: |
| # |
| # @format: Encryption format. |
| # |
| # @parent: Parent image encryption options (for cloned images). Can |
| # be left unspecified if this cloned image is encrypted using the |
| # same format and secret as its parent image (i.e. not explicitly |
| # formatted) or if its parent image is not encrypted. (Since 8.0) |
| # |
| # Since: 6.1 |
| ## |
| { 'union': 'RbdEncryptionOptions', |
| 'base': { 'format': 'RbdImageEncryptionFormat', |
| '*parent': 'RbdEncryptionOptions' }, |
| 'discriminator': 'format', |
| 'data': { 'luks': 'RbdEncryptionOptionsLUKS', |
| 'luks2': 'RbdEncryptionOptionsLUKS2', |
| 'luks-any': 'RbdEncryptionOptionsLUKSAny'} } |
| |
| ## |
| # @RbdEncryptionCreateOptions: |
| # |
| # @format: Encryption format. |
| # |
| # Since: 6.1 |
| ## |
| { 'union': 'RbdEncryptionCreateOptions', |
| 'base': { 'format': 'RbdImageEncryptionFormat' }, |
| 'discriminator': 'format', |
| 'data': { 'luks': 'RbdEncryptionCreateOptionsLUKS', |
| 'luks2': 'RbdEncryptionCreateOptionsLUKS2' } } |
| |
| ## |
| # @BlockdevOptionsRbd: |
| # |
| # @pool: Ceph pool name. |
| # |
| # @namespace: Rados namespace name in the Ceph pool. (Since 5.0) |
| # |
| # @image: Image name in the Ceph pool. |
| # |
| # @conf: path to Ceph configuration file. Values in the configuration |
| # file will be overridden by options specified via QAPI. |
| # |
| # @snapshot: Ceph snapshot name. |
| # |
| # @encrypt: Image encryption options. (Since 6.1) |
| # |
| # @user: Ceph id name. |
| # |
| # @auth-client-required: Acceptable authentication modes. This maps |
| # to Ceph configuration option "auth_client_required". (Since |
| # 3.0) |
| # |
| # @key-secret: ID of a QCryptoSecret object providing a key for cephx |
| # authentication. This maps to Ceph configuration option "key". |
| # (Since 3.0) |
| # |
| # @server: Monitor host address and port. This maps to the "mon_host" |
| # Ceph option. |
| # |
| # Since: 2.9 |
| ## |
| { 'struct': 'BlockdevOptionsRbd', |
| 'data': { 'pool': 'str', |
| '*namespace': 'str', |
| 'image': 'str', |
| '*conf': 'str', |
| '*snapshot': 'str', |
| '*encrypt': 'RbdEncryptionOptions', |
| '*user': 'str', |
| '*auth-client-required': ['RbdAuthMode'], |
| '*key-secret': 'str', |
| '*server': ['InetSocketAddressBase'] } } |
| |
| ## |
| # @ReplicationMode: |
| # |
| # An enumeration of replication modes. |
| # |
| # @primary: Primary mode, the vm's state will be sent to secondary |
| # QEMU. |
| # |
| # @secondary: Secondary mode, receive the vm's state from primary |
| # QEMU. |
| # |
| # Since: 2.9 |
| ## |
| { 'enum' : 'ReplicationMode', 'data' : [ 'primary', 'secondary' ], |
| 'if': 'CONFIG_REPLICATION' } |
| |
| ## |
| # @BlockdevOptionsReplication: |
| # |
| # Driver specific block device options for replication |
| # |
| # @mode: the replication mode |
| # |
| # @top-id: In secondary mode, node name or device ID of the root node |
| # who owns the replication node chain. Must not be given in |
| # primary mode. |
| # |
| # Since: 2.9 |
| ## |
| { 'struct': 'BlockdevOptionsReplication', |
| 'base': 'BlockdevOptionsGenericFormat', |
| 'data': { 'mode': 'ReplicationMode', |
| '*top-id': 'str' }, |
| 'if': 'CONFIG_REPLICATION' } |
| |
| ## |
| # @NFSTransport: |
| # |
| # An enumeration of NFS transport types |
| # |
| # @inet: TCP transport |
| # |
| # Since: 2.9 |
| ## |
| { 'enum': 'NFSTransport', |
| 'data': [ 'inet' ] } |
| |
| ## |
| # @NFSServer: |
| # |
| # Captures the address of the socket |
| # |
| # @type: transport type used for NFS (only TCP supported) |
| # |
| # @host: host address for NFS server |
| # |
| # Since: 2.9 |
| ## |
| { 'struct': 'NFSServer', |
| 'data': { 'type': 'NFSTransport', |
| 'host': 'str' } } |
| |
| ## |
| # @BlockdevOptionsNfs: |
| # |
| # Driver specific block device option for NFS |
| # |
| # @server: host address |
| # |
| # @path: path of the image on the host |
| # |
| # @user: UID value to use when talking to the server (defaults to |
| # 65534 on Windows and getuid() on unix) |
| # |
| # @group: GID value to use when talking to the server (defaults to |
| # 65534 on Windows and getgid() in unix) |
| # |
| # @tcp-syn-count: number of SYNs during the session establishment |
| # (defaults to libnfs default) |
| # |
| # @readahead-size: set the readahead size in bytes (defaults to libnfs |
| # default) |
| # |
| # @page-cache-size: set the pagecache size in bytes (defaults to |
| # libnfs default) |
| # |
| # @debug: set the NFS debug level (max 2) (defaults to libnfs default) |
| # |
| # Since: 2.9 |
| ## |
| { 'struct': 'BlockdevOptionsNfs', |
| 'data': { 'server': 'NFSServer', |
| 'path': 'str', |
| '*user': 'int', |
| '*group': 'int', |
| '*tcp-syn-count': 'int', |
| '*readahead-size': 'int', |
| '*page-cache-size': 'int', |
| '*debug': 'int' } } |
| |
| ## |
| # @BlockdevOptionsCurlBase: |
| # |
| # Driver specific block device options shared by all protocols |
| # supported by the curl backend. |
| # |
| # @url: URL of the image file |
| # |
| # @readahead: Size of the read-ahead cache; must be a multiple of 512 |
| # (defaults to 256 kB) |
| # |
| # @timeout: Timeout for connections, in seconds (defaults to 5) |
| # |
| # @username: Username for authentication (defaults to none) |
| # |
| # @password-secret: ID of a QCryptoSecret object providing a password |
| # for authentication (defaults to no password) |
| # |
| # @proxy-username: Username for proxy authentication (defaults to |
| # none) |
| # |
| # @proxy-password-secret: ID of a QCryptoSecret object providing a |
| # password for proxy authentication (defaults to no password) |
| # |
| # Since: 2.9 |
| ## |
| { 'struct': 'BlockdevOptionsCurlBase', |
| 'data': { 'url': 'str', |
| '*readahead': 'int', |
| '*timeout': 'int', |
| '*username': 'str', |
| '*password-secret': 'str', |
| '*proxy-username': 'str', |
| '*proxy-password-secret': 'str' } } |
| |
| ## |
| # @BlockdevOptionsCurlHttp: |
| # |
| # Driver specific block device options for HTTP connections over the |
| # curl backend. URLs must start with "http://". |
| # |
| # @cookie: List of cookies to set; format is "name1=content1; |
| # name2=content2;" as explained by CURLOPT_COOKIE(3). Defaults to |
| # no cookies. |
| # |
| # @cookie-secret: ID of a QCryptoSecret object providing the cookie |
| # data in a secure way. See @cookie for the format. (since 2.10) |
| # |
| # Since: 2.9 |
| ## |
| { 'struct': 'BlockdevOptionsCurlHttp', |
| 'base': 'BlockdevOptionsCurlBase', |
| 'data': { '*cookie': 'str', |
| '*cookie-secret': 'str'} } |
| |
| ## |
| # @BlockdevOptionsCurlHttps: |
| # |
| # Driver specific block device options for HTTPS connections over the |
| # curl backend. URLs must start with "https://". |
| # |
| # @cookie: List of cookies to set; format is "name1=content1; |
| # name2=content2;" as explained by CURLOPT_COOKIE(3). Defaults to |
| # no cookies. |
| # |
| # @sslverify: Whether to verify the SSL certificate's validity |
| # (defaults to true) |
| # |
| # @cookie-secret: ID of a QCryptoSecret object providing the cookie |
| # data in a secure way. See @cookie for the format. (since 2.10) |
| # |
| # Since: 2.9 |
| ## |
| { 'struct': 'BlockdevOptionsCurlHttps', |
| 'base': 'BlockdevOptionsCurlBase', |
| 'data': { '*cookie': 'str', |
| '*sslverify': 'bool', |
| '*cookie-secret': 'str'} } |
| |
| ## |
| # @BlockdevOptionsCurlFtp: |
| # |
| # Driver specific block device options for FTP connections over the |
| # curl backend. URLs must start with "ftp://". |
| # |
| # Since: 2.9 |
| ## |
| { 'struct': 'BlockdevOptionsCurlFtp', |
| 'base': 'BlockdevOptionsCurlBase', |
| 'data': { } } |
| |
| ## |
| # @BlockdevOptionsCurlFtps: |
| # |
| # Driver specific block device options for FTPS connections over the |
| # curl backend. URLs must start with "ftps://". |
| # |
| # @sslverify: Whether to verify the SSL certificate's validity |
| # (defaults to true) |
| # |
| # Since: 2.9 |
| ## |
| { 'struct': 'BlockdevOptionsCurlFtps', |
| 'base': 'BlockdevOptionsCurlBase', |
| 'data': { '*sslverify': 'bool' } } |
| |
| ## |
| # @BlockdevOptionsNbd: |
| # |
| # Driver specific block device options for NBD. |
| # |
| # @server: NBD server address |
| # |
| # @export: export name |
| # |
| # @tls-creds: TLS credentials ID |
| # |
| # @tls-hostname: TLS hostname override for certificate validation |
| # (Since 7.0) |
| # |
| # @x-dirty-bitmap: A metadata context name such as |
| # "qemu:dirty-bitmap:NAME" or "qemu:allocation-depth" to query in |
| # place of the traditional "base:allocation" block status (see |
| # NBD_OPT_LIST_META_CONTEXT in the NBD protocol; and yes, naming |
| # this option x-context would have made more sense) (since 3.0) |
| # |
| # @reconnect-delay: On an unexpected disconnect, the nbd client tries |
| # to connect again until succeeding or encountering a serious |
| # error. During the first @reconnect-delay seconds, all requests |
| # are paused and will be rerun on a successful reconnect. After |
| # that time, any delayed requests and all future requests before a |
| # successful reconnect will immediately fail. Default 0 (Since |
| # 4.2) |
| # |
| # @open-timeout: In seconds. If zero, the nbd driver tries the |
| # connection only once, and fails to open if the connection fails. |
| # If non-zero, the nbd driver will repeat connection attempts |
| # until successful or until @open-timeout seconds have elapsed. |
| # Default 0 (Since 7.0) |
| # |
| # Features: |
| # |
| # @unstable: Member @x-dirty-bitmap is experimental. |
| # |
| # Since: 2.9 |
| ## |
| { 'struct': 'BlockdevOptionsNbd', |
| 'data': { 'server': 'SocketAddress', |
| '*export': 'str', |
| '*tls-creds': 'str', |
| '*tls-hostname': 'str', |
| '*x-dirty-bitmap': { 'type': 'str', 'features': [ 'unstable' ] }, |
| '*reconnect-delay': 'uint32', |
| '*open-timeout': 'uint32' } } |
| |
| ## |
| # @BlockdevOptionsRaw: |
| # |
| # Driver specific block device options for the raw driver. |
| # |
| # @offset: position where the block device starts |
| # |
| # @size: the assumed size of the device |
| # |
| # Since: 2.9 |
| ## |
| { 'struct': 'BlockdevOptionsRaw', |
| 'base': 'BlockdevOptionsGenericFormat', |
| 'data': { '*offset': 'int', '*size': 'int' } } |
| |
| ## |
| # @BlockdevOptionsThrottle: |
| # |
| # Driver specific block device options for the throttle driver |
| # |
| # @throttle-group: the name of the throttle-group object to use. It |
| # must already exist. |
| # |
| # @file: reference to or definition of the data source block device |
| # |
| # Since: 2.11 |
| ## |
| { 'struct': 'BlockdevOptionsThrottle', |
| 'data': { 'throttle-group': 'str', |
| 'file' : 'BlockdevRef' |
| } } |
| |
| ## |
| # @BlockdevOptionsCor: |
| # |
| # Driver specific block device options for the copy-on-read driver. |
| # |
| # @bottom: The name of a non-filter node (allocation-bearing layer) |
| # that limits the COR operations in the backing chain (inclusive), |
| # so that no data below this node will be copied by this filter. |
| # If option is absent, the limit is not applied, so that data from |
| # all backing layers may be copied. |
| # |
| # Since: 6.0 |
| ## |
| { 'struct': 'BlockdevOptionsCor', |
| 'base': 'BlockdevOptionsGenericFormat', |
| 'data': { '*bottom': 'str' } } |
| |
| ## |
| # @OnCbwError: |
| # |
| # An enumeration of possible behaviors for copy-before-write operation |
| # failures. |
| # |
| # @break-guest-write: report the error to the guest. This way, the |
| # guest will not be able to overwrite areas that cannot be backed |
| # up, so the backup process remains valid. |
| # |
| # @break-snapshot: continue guest write. Doing so will make the |
| # provided snapshot state invalid and any backup or export process |
| # based on it will finally fail. |
| # |
| # Since: 7.1 |
| ## |
| { 'enum': 'OnCbwError', |
| 'data': [ 'break-guest-write', 'break-snapshot' ] } |
| |
| ## |
| # @BlockdevOptionsCbw: |
| # |
| # Driver specific block device options for the copy-before-write |
| # driver, which does so called copy-before-write operations: when data |
| # is written to the filter, the filter first reads corresponding |
| # blocks from its file child and copies them to @target child. After |
| # successfully copying, the write request is propagated to file child. |
| # If copying fails, the original write request is failed too and no |
| # data is written to file child. |
| # |
| # @target: The target for copy-before-write operations. |
| # |
| # @bitmap: If specified, copy-before-write filter will do |
| # copy-before-write operations only for dirty regions of the |
| # bitmap. Bitmap size must be equal to length of file and target |
| # child of the filter. Note also, that bitmap is used only to |
| # initialize internal bitmap of the process, so further |
| # modifications (or removing) of specified bitmap doesn't |
| # influence the filter. (Since 7.0) |
| # |
| # @on-cbw-error: Behavior on failure of copy-before-write operation. |
| # Default is @break-guest-write. (Since 7.1) |
| # |
| # @cbw-timeout: Zero means no limit. Non-zero sets the timeout in |
| # seconds for copy-before-write operation. When a timeout occurs, |
| # the respective copy-before-write operation will fail, and the |
| # @on-cbw-error parameter will decide how this failure is handled. |
| # Default 0. (Since 7.1) |
| # |
| # Since: 6.2 |
| ## |
| { 'struct': 'BlockdevOptionsCbw', |
| 'base': 'BlockdevOptionsGenericFormat', |
| 'data': { 'target': 'BlockdevRef', '*bitmap': 'BlockDirtyBitmap', |
| '*on-cbw-error': 'OnCbwError', '*cbw-timeout': 'uint32' } } |
| |
| ## |
| # @BlockdevOptions: |
| # |
| # Options for creating a block device. Many options are available for |
| # all block devices, independent of the block driver: |
| # |
| # @driver: block driver name |
| # |
| # @node-name: the node name of the new node (Since 2.0). This option |
| # is required on the top level of blockdev-add. Valid node names |
| # start with an alphabetic character and may contain only |
| # alphanumeric characters, '-', '.' and '_'. Their maximum length |
| # is 31 characters. |
| # |
| # @discard: discard-related options (default: ignore) |
| # |
| # @cache: cache-related options |
| # |
| # @read-only: whether the block device should be read-only (default: |
| # false). Note that some block drivers support only read-only |
| # access, either generally or in certain configurations. In this |
| # case, the default value does not work and the option must be |
| # specified explicitly. |
| # |
| # @auto-read-only: if true and @read-only is false, QEMU may |
| # automatically decide not to open the image read-write as |
| # requested, but fall back to read-only instead (and switch |
| # between the modes later), e.g. depending on whether the image |
| # file is writable or whether a writing user is attached to the |
| # node (default: false, since 3.1) |
| # |
| # @detect-zeroes: detect and optimize zero writes (Since 2.1) |
| # (default: off) |
| # |
| # @force-share: force share all permission on added nodes. Requires |
| # read-only=true. (Since 2.10) |
| # |
| # Since: 2.9 |
| ## |
| { 'union': 'BlockdevOptions', |
| 'base': { 'driver': 'BlockdevDriver', |
| '*node-name': 'str', |
| '*discard': 'BlockdevDiscardOptions', |
| '*cache': 'BlockdevCacheOptions', |
| '*read-only': 'bool', |
| '*auto-read-only': 'bool', |
| '*force-share': 'bool', |
| '*detect-zeroes': 'BlockdevDetectZeroesOptions' }, |
| 'discriminator': 'driver', |
| 'data': { |
| 'blkdebug': 'BlockdevOptionsBlkdebug', |
| 'blklogwrites':'BlockdevOptionsBlklogwrites', |
| 'blkverify': 'BlockdevOptionsBlkverify', |
| 'blkreplay': 'BlockdevOptionsBlkreplay', |
| 'bochs': 'BlockdevOptionsGenericFormat', |
| 'cloop': 'BlockdevOptionsGenericFormat', |
| 'compress': 'BlockdevOptionsGenericFormat', |
| 'copy-before-write':'BlockdevOptionsCbw', |
| 'copy-on-read':'BlockdevOptionsCor', |
| 'dmg': 'BlockdevOptionsGenericFormat', |
| 'file': 'BlockdevOptionsFile', |
| 'ftp': 'BlockdevOptionsCurlFtp', |
| 'ftps': 'BlockdevOptionsCurlFtps', |
| 'gluster': 'BlockdevOptionsGluster', |
| 'host_cdrom': { 'type': 'BlockdevOptionsFile', |
| 'if': 'HAVE_HOST_BLOCK_DEVICE' }, |
| 'host_device': { 'type': 'BlockdevOptionsFile', |
| 'if': 'HAVE_HOST_BLOCK_DEVICE' }, |
| 'http': 'BlockdevOptionsCurlHttp', |
| 'https': 'BlockdevOptionsCurlHttps', |
| 'io_uring': { 'type': 'BlockdevOptionsIoUring', |
| 'if': 'CONFIG_BLKIO' }, |
| 'iscsi': 'BlockdevOptionsIscsi', |
| 'luks': 'BlockdevOptionsLUKS', |
| 'nbd': 'BlockdevOptionsNbd', |
| 'nfs': 'BlockdevOptionsNfs', |
| 'null-aio': 'BlockdevOptionsNull', |
| 'null-co': 'BlockdevOptionsNull', |
| 'nvme': 'BlockdevOptionsNVMe', |
| 'nvme-io_uring': { 'type': 'BlockdevOptionsNvmeIoUring', |
| 'if': 'CONFIG_BLKIO' }, |
| 'parallels': 'BlockdevOptionsGenericFormat', |
| 'preallocate':'BlockdevOptionsPreallocate', |
| 'qcow2': 'BlockdevOptionsQcow2', |
| 'qcow': 'BlockdevOptionsQcow', |
| 'qed': 'BlockdevOptionsGenericCOWFormat', |
| 'quorum': 'BlockdevOptionsQuorum', |
| 'raw': 'BlockdevOptionsRaw', |
| 'rbd': 'BlockdevOptionsRbd', |
| 'replication': { 'type': 'BlockdevOptionsReplication', |
| 'if': 'CONFIG_REPLICATION' }, |
| 'snapshot-access': 'BlockdevOptionsGenericFormat', |
| 'ssh': 'BlockdevOptionsSsh', |
| 'throttle': 'BlockdevOptionsThrottle', |
| 'vdi': 'BlockdevOptionsGenericFormat', |
| 'vhdx': 'BlockdevOptionsGenericFormat', |
| 'virtio-blk-vfio-pci': |
| { 'type': 'BlockdevOptionsVirtioBlkVfioPci', |
| 'if': 'CONFIG_BLKIO' }, |
| 'virtio-blk-vhost-user': |
| { 'type': 'BlockdevOptionsVirtioBlkVhostUser', |
| 'if': 'CONFIG_BLKIO' }, |
| 'virtio-blk-vhost-vdpa': |
| { 'type': 'BlockdevOptionsVirtioBlkVhostVdpa', |
| 'if': 'CONFIG_BLKIO' }, |
| 'vmdk': 'BlockdevOptionsGenericCOWFormat', |
| 'vpc': 'BlockdevOptionsGenericFormat', |
| 'vvfat': 'BlockdevOptionsVVFAT' |
| } } |
| |
| ## |
| # @BlockdevRef: |
| # |
| # Reference to a block device. |
| # |
| # @definition: defines a new block device inline |
| # |
| # @reference: references the ID of an existing block device |
| # |
| # Since: 2.9 |
| ## |
| { 'alternate': 'BlockdevRef', |
| 'data': { 'definition': 'BlockdevOptions', |
| 'reference': 'str' } } |
| |
| ## |
| # @BlockdevRefOrNull: |
| # |
| # Reference to a block device. |
| # |
| # @definition: defines a new block device inline |
| # |
| # @reference: references the ID of an existing block device. An empty |
| # string means that no block device should be referenced. |
| # Deprecated; use null instead. |
| # |
| # @null: No block device should be referenced (since 2.10) |
| # |
| # Since: 2.9 |
| ## |
| { 'alternate': 'BlockdevRefOrNull', |
| 'data': { 'definition': 'BlockdevOptions', |
| 'reference': 'str', |
| 'null': 'null' } } |
| |
| ## |
| # @blockdev-add: |
| # |
| # Creates a new block device. |
| # |
| # Since: 2.9 |
| # |
| # .. qmp-example:: |
| # |
| # -> { "execute": "blockdev-add", |
| # "arguments": { |
| # "driver": "qcow2", |
| # "node-name": "test1", |
| # "file": { |
| # "driver": "file", |
| # "filename": "test.qcow2" |
| # } |
| # } |
| # } |
| # <- { "return": {} } |
| # |
| # .. qmp-example:: |
| # |
| # -> { "execute": "blockdev-add", |
| # "arguments": { |
| # "driver": "qcow2", |
| # "node-name": "node0", |
| # "discard": "unmap", |
| # "cache": { |
| # "direct": true |
| # }, |
| # "file": { |
| # "driver": "file", |
| # "filename": "/tmp/test.qcow2" |
| # }, |
| # "backing": { |
| # "driver": "raw", |
| # "file": { |
| # "driver": "file", |
| # "filename": "/dev/fdset/4" |
| # } |
| # } |
| # } |
| # } |
| # |
| # <- { "return": {} } |
| ## |
| { 'command': 'blockdev-add', 'data': 'BlockdevOptions', 'boxed': true, |
| 'allow-preconfig': true } |
| |
| ## |
| # @blockdev-reopen: |
| # |
| # Reopens one or more block devices using the given set of options. |
| # Any option not specified will be reset to its default value |
| # regardless of its previous status. If an option cannot be changed |
| # or a particular driver does not support reopening then the command |
| # will return an error. All devices in the list are reopened in one |
| # transaction, so if one of them fails then the whole transaction is |
| # cancelled. |
| # |
| # The command receives a list of block devices to reopen. For each |
| # one of them, the top-level @node-name option (from BlockdevOptions) |
| # must be specified and is used to select the block device to be |
| # reopened. Other @node-name options must be either omitted or set to |
| # the current name of the appropriate node. This command won't change |
| # any node name and any attempt to do it will result in an error. |
| # |
| # In the case of options that refer to child nodes, the behavior of |
| # this command depends on the value: |
| # |
| # 1) A set of options (BlockdevOptions): the child is reopened with |
| # the specified set of options. |
| # |
| # 2) A reference to the current child: the child is reopened using |
| # its existing set of options. |
| # |
| # 3) A reference to a different node: the current child is replaced |
| # with the specified one. |
| # |
| # 4) NULL: the current child (if any) is detached. |
| # |
| # Options (1) and (2) are supported in all cases. Option (3) is |
| # supported for @file and @backing, and option (4) for @backing only. |
| # |
| # Unlike with blockdev-add, the @backing option must always be present |
| # unless the node being reopened does not have a backing file and its |
| # image does not have a default backing file name as part of its |
| # metadata. |
| # |
| # Since: 6.1 |
| ## |
| { 'command': 'blockdev-reopen', |
| 'data': { 'options': ['BlockdevOptions'] }, |
| 'allow-preconfig': true } |
| |
| ## |
| # @blockdev-del: |
| # |
| # Deletes a block device that has been added using blockdev-add. The |
| # command will fail if the node is attached to a device or is |
| # otherwise being used. |
| # |
| # @node-name: Name of the graph node to delete. |
| # |
| # Since: 2.9 |
| # |
| # .. qmp-example:: |
| # |
| # -> { "execute": "blockdev-add", |
| # "arguments": { |
| # "driver": "qcow2", |
| # "node-name": "node0", |
| # "file": { |
| # "driver": "file", |
| # "filename": "test.qcow2" |
| # } |
| # } |
| # } |
| # <- { "return": {} } |
| # |
| # -> { "execute": "blockdev-del", |
| # "arguments": { "node-name": "node0" } |
| # } |
| # <- { "return": {} } |
| ## |
| { 'command': 'blockdev-del', 'data': { 'node-name': 'str' }, |
| 'allow-preconfig': true } |
| |
| ## |
| # @BlockdevCreateOptionsFile: |
| # |
| # Driver specific image creation options for file. |
| # |
| # @filename: Filename for the new image file |
| # |
| # @size: Size of the virtual disk in bytes |
| # |
| # @preallocation: Preallocation mode for the new image (default: off; |
| # allowed values: off, falloc (if CONFIG_POSIX_FALLOCATE), full |
| # (if CONFIG_POSIX)) |
| # |
| # @nocow: Turn off copy-on-write (valid only on btrfs; default: off) |
| # |
| # @extent-size-hint: Extent size hint to add to the image file; 0 for |
| # not adding an extent size hint (default: 1 MB, since 5.1) |
| # |
| # Since: 2.12 |
| ## |
| { 'struct': 'BlockdevCreateOptionsFile', |
| 'data': { 'filename': 'str', |
| 'size': 'size', |
| '*preallocation': 'PreallocMode', |
| '*nocow': 'bool', |
| '*extent-size-hint': 'size'} } |
| |
| ## |
| # @BlockdevCreateOptionsGluster: |
| # |
| # Driver specific image creation options for gluster. |
| # |
| # @location: Where to store the new image file |
| # |
| # @size: Size of the virtual disk in bytes |
| # |
| # @preallocation: Preallocation mode for the new image (default: off; |
| # allowed values: off, falloc (if CONFIG_GLUSTERFS_FALLOCATE), |
| # full (if CONFIG_GLUSTERFS_ZEROFILL)) |
| # |
| # Since: 2.12 |
| ## |
| { 'struct': 'BlockdevCreateOptionsGluster', |
| 'data': { 'location': 'BlockdevOptionsGluster', |
| 'size': 'size', |
| '*preallocation': 'PreallocMode' } } |
| |
| ## |
| # @BlockdevCreateOptionsLUKS: |
| # |
| # Driver specific image creation options for LUKS. |
| # |
| # @file: Node to create the image format on, mandatory except when |
| # 'preallocation' is not requested |
| # |
| # @header: Block device holding a detached LUKS header. (since 9.0) |
| # |
| # @size: Size of the virtual disk in bytes |
| # |
| # @preallocation: Preallocation mode for the new image (since: 4.2) |
| # (default: off; allowed values: off, metadata, falloc, full) |
| # |
| # Since: 2.12 |
| ## |
| { 'struct': 'BlockdevCreateOptionsLUKS', |
| 'base': 'QCryptoBlockCreateOptionsLUKS', |
| 'data': { '*file': 'BlockdevRef', |
| '*header': 'BlockdevRef', |
| 'size': 'size', |
| '*preallocation': 'PreallocMode' } } |
| |
| ## |
| # @BlockdevCreateOptionsNfs: |
| # |
| # Driver specific image creation options for NFS. |
| # |
| # @location: Where to store the new image file |
| # |
| # @size: Size of the virtual disk in bytes |
| # |
| # Since: 2.12 |
| ## |
| { 'struct': 'BlockdevCreateOptionsNfs', |
| 'data': { 'location': 'BlockdevOptionsNfs', |
| 'size': 'size' } } |
| |
| ## |
| # @BlockdevCreateOptionsParallels: |
| # |
| # Driver specific image creation options for parallels. |
| # |
| # @file: Node to create the image format on |
| # |
| # @size: Size of the virtual disk in bytes |
| # |
| # @cluster-size: Cluster size in bytes (default: 1 MB) |
| # |
| # Since: 2.12 |
| ## |
| { 'struct': 'BlockdevCreateOptionsParallels', |
| 'data': { 'file': 'BlockdevRef', |
| 'size': 'size', |
| '*cluster-size': 'size' } } |
| |
| ## |
| # @BlockdevCreateOptionsQcow: |
| # |
| # Driver specific image creation options for qcow. |
| # |
| # @file: Node to create the image format on |
| # |
| # @size: Size of the virtual disk in bytes |
| # |
| # @backing-file: File name of the backing file if a backing file |
| # should be used |
| # |
| # @encrypt: Encryption options if the image should be encrypted |
| # |
| # Since: 2.12 |
| ## |
| { 'struct': 'BlockdevCreateOptionsQcow', |
| 'data': { 'file': 'BlockdevRef', |
| 'size': 'size', |
| '*backing-file': 'str', |
| '*encrypt': 'QCryptoBlockCreateOptions' } } |
| |
| ## |
| # @BlockdevQcow2Version: |
| # |
| # @v2: The original QCOW2 format as introduced in qemu 0.10 (version |
| # 2) |
| # |
| # @v3: The extended QCOW2 format as introduced in qemu 1.1 (version 3) |
| # |
| # Since: 2.12 |
| ## |
| { 'enum': 'BlockdevQcow2Version', |
| 'data': [ 'v2', 'v3' ] } |
| |
| ## |
| # @Qcow2CompressionType: |
| # |
| # Compression type used in qcow2 image file |
| # |
| # @zlib: zlib compression, see <http://zlib.net/> |
| # |
| # @zstd: zstd compression, see <http://github.com/facebook/zstd> |
| # |
| # Since: 5.1 |
| ## |
| { 'enum': 'Qcow2CompressionType', |
| 'data': [ 'zlib', { 'name': 'zstd', 'if': 'CONFIG_ZSTD' } ] } |
| |
| ## |
| # @BlockdevCreateOptionsQcow2: |
| # |
| # Driver specific image creation options for qcow2. |
| # |
| # @file: Node to create the image format on |
| # |
| # @data-file: Node to use as an external data file in which all guest |
| # data is stored so that only metadata remains in the qcow2 file |
| # (since: 4.0) |
| # |
| # @data-file-raw: True if the external data file must stay valid as a |
| # standalone (read-only) raw image without looking at qcow2 |
| # metadata (default: false; since: 4.0) |
| # |
| # @extended-l2: True to make the image have extended L2 entries |
| # (default: false; since 5.2) |
| # |
| # @size: Size of the virtual disk in bytes |
| # |
| # @version: Compatibility level (default: v3) |
| # |
| # @backing-file: File name of the backing file if a backing file |
| # should be used |
| # |
| # @backing-fmt: Name of the block driver to use for the backing file |
| # |
| # @encrypt: Encryption options if the image should be encrypted |
| # |
| # @cluster-size: qcow2 cluster size in bytes (default: 65536) |
| # |
| # @preallocation: Preallocation mode for the new image (default: off; |
| # allowed values: off, falloc, full, metadata) |
| # |
| # @lazy-refcounts: True if refcounts may be updated lazily |
| # (default: off) |
| # |
| # @refcount-bits: Width of reference counts in bits (default: 16) |
| # |
| # @compression-type: The image cluster compression method |
| # (default: zlib, since 5.1) |
| # |
| # Since: 2.12 |
| ## |
| { 'struct': 'BlockdevCreateOptionsQcow2', |
| 'data': { 'file': 'BlockdevRef', |
| '*data-file': 'BlockdevRef', |
| '*data-file-raw': 'bool', |
| '*extended-l2': 'bool', |
| 'size': 'size', |
| '*version': 'BlockdevQcow2Version', |
| '*backing-file': 'str', |
| '*backing-fmt': 'BlockdevDriver', |
| '*encrypt': 'QCryptoBlockCreateOptions', |
| '*cluster-size': 'size', |
| '*preallocation': 'PreallocMode', |
| '*lazy-refcounts': 'bool', |
| '*refcount-bits': 'int', |
| '*compression-type':'Qcow2CompressionType' } } |
| |
| ## |
| # @BlockdevCreateOptionsQed: |
| # |
| # Driver specific image creation options for qed. |
| # |
| # @file: Node to create the image format on |
| # |
| # @size: Size of the virtual disk in bytes |
| # |
| # @backing-file: File name of the backing file if a backing file |
| # should be used |
| # |
| # @backing-fmt: Name of the block driver to use for the backing file |
| # |
| # @cluster-size: Cluster size in bytes (default: 65536) |
| # |
| # @table-size: L1/L2 table size (in clusters) |
| # |
| # Since: 2.12 |
| ## |
| { 'struct': 'BlockdevCreateOptionsQed', |
| 'data': { 'file': 'BlockdevRef', |
| 'size': 'size', |
| '*backing-file': 'str', |
| '*backing-fmt': 'BlockdevDriver', |
| '*cluster-size': 'size', |
| '*table-size': 'int' } } |
| |
| ## |
| # @BlockdevCreateOptionsRbd: |
| # |
| # Driver specific image creation options for rbd/Ceph. |
| # |
| # @location: Where to store the new image file. This location cannot |
| # point to a snapshot. |
| # |
| # @size: Size of the virtual disk in bytes |
| # |
| # @cluster-size: RBD object size |
| # |
| # @encrypt: Image encryption options. (Since 6.1) |
| # |
| # Since: 2.12 |
| ## |
| { 'struct': 'BlockdevCreateOptionsRbd', |
| 'data': { 'location': 'BlockdevOptionsRbd', |
| 'size': 'size', |
| '*cluster-size' : 'size', |
| '*encrypt' : 'RbdEncryptionCreateOptions' } } |
| |
| ## |
| # @BlockdevVmdkSubformat: |
| # |
| # Subformat options for VMDK images |
| # |
| # @monolithicSparse: Single file image with sparse cluster allocation |
| # |
| # @monolithicFlat: Single flat data image and a descriptor file |
| # |
| # @twoGbMaxExtentSparse: Data is split into 2GB (per virtual LBA) |
| # sparse extent files, in addition to a descriptor file |
| # |
| # @twoGbMaxExtentFlat: Data is split into 2GB (per virtual LBA) flat |
| # extent files, in addition to a descriptor file |
| # |
| # @streamOptimized: Single file image sparse cluster allocation, |
| # optimized for streaming over network. |
| # |
| # Since: 4.0 |
| ## |
| { 'enum': 'BlockdevVmdkSubformat', |
| 'data': [ 'monolithicSparse', 'monolithicFlat', 'twoGbMaxExtentSparse', |
| 'twoGbMaxExtentFlat', 'streamOptimized'] } |
| |
| ## |
| # @BlockdevVmdkAdapterType: |
| # |
| # Adapter type info for VMDK images |
| # |
| # Since: 4.0 |
| ## |
| { 'enum': 'BlockdevVmdkAdapterType', |
| 'data': [ 'ide', 'buslogic', 'lsilogic', 'legacyESX'] } |
| |
| ## |
| # @BlockdevCreateOptionsVmdk: |
| # |
| # Driver specific image creation options for VMDK. |
| # |
| # @file: Where to store the new image file. This refers to the image |
| # file for monolithcSparse and streamOptimized format, or the |
| # descriptor file for other formats. |
| # |
| # @size: Size of the virtual disk in bytes |
| # |
| # @extents: Where to store the data extents. Required for |
| # monolithcFlat, twoGbMaxExtentSparse and twoGbMaxExtentFlat |
| # formats. For monolithicFlat, only one entry is required; for |
| # twoGbMaxExtent* formats, the number of entries required is |
| # calculated as extent_number = virtual_size / 2GB. Providing |
| # more extents than will be used is an error. |
| # |
| # @subformat: The subformat of the VMDK image. Default: |
| # "monolithicSparse". |
| # |
| # @backing-file: The path of backing file. Default: no backing file |
| # is used. |
| # |
| # @adapter-type: The adapter type used to fill in the descriptor. |
| # Default: ide. |
| # |
| # @hwversion: Hardware version. The meaningful options are "4" or |
| # "6". Default: "4". |
| # |
| # @toolsversion: VMware guest tools version. Default: "2147483647" |
| # (Since 6.2) |
| # |
| # @zeroed-grain: Whether to enable zeroed-grain feature for sparse |
| # subformats. Default: false. |
| # |
| # Since: 4.0 |
| ## |
| { 'struct': 'BlockdevCreateOptionsVmdk', |
| 'data': { 'file': 'BlockdevRef', |
| 'size': 'size', |
| '*extents': ['BlockdevRef'], |
| '*subformat': 'BlockdevVmdkSubformat', |
| '*backing-file': 'str', |
| '*adapter-type': 'BlockdevVmdkAdapterType', |
| '*hwversion': 'str', |
| '*toolsversion': 'str', |
| '*zeroed-grain': 'bool' } } |
| |
| ## |
| # @BlockdevCreateOptionsSsh: |
| # |
| # Driver specific image creation options for SSH. |
| # |
| # @location: Where to store the new image file |
| # |
| # @size: Size of the virtual disk in bytes |
| # |
| # Since: 2.12 |
| ## |
| { 'struct': 'BlockdevCreateOptionsSsh', |
| 'data': { 'location': 'BlockdevOptionsSsh', |
| 'size': 'size' } } |
| |
| ## |
| # @BlockdevCreateOptionsVdi: |
| # |
| # Driver specific image creation options for VDI. |
| # |
| # @file: Node to create the image format on |
| # |
| # @size: Size of the virtual disk in bytes |
| # |
| # @preallocation: Preallocation mode for the new image (default: off; |
| # allowed values: off, metadata) |
| # |
| # Since: 2.12 |
| ## |
| { 'struct': 'BlockdevCreateOptionsVdi', |
| 'data': { 'file': 'BlockdevRef', |
| 'size': 'size', |
| '*preallocation': 'PreallocMode' } } |
| |
| ## |
| # @BlockdevVhdxSubformat: |
| # |
| # @dynamic: Growing image file |
| # |
| # @fixed: Preallocated fixed-size image file |
| # |
| # Since: 2.12 |
| ## |
| { 'enum': 'BlockdevVhdxSubformat', |
| 'data': [ 'dynamic', 'fixed' ] } |
| |
| ## |
| # @BlockdevCreateOptionsVhdx: |
| # |
| # Driver specific image creation options for vhdx. |
| # |
| # @file: Node to create the image format on |
| # |
| # @size: Size of the virtual disk in bytes |
| # |
| # @log-size: Log size in bytes, must be a multiple of 1 MB (default: 1 |
| # MB) |
| # |
| # @block-size: Block size in bytes, must be a multiple of 1 MB and not |
| # larger than 256 MB (default: automatically choose a block size |
| # depending on the image size) |
| # |
| # @subformat: vhdx subformat (default: dynamic) |
| # |
| # @block-state-zero: Force use of payload blocks of type 'ZERO'. |
| # Non-standard, but default. Do not set to 'off' when using |
| # 'qemu-img convert' with subformat=dynamic. |
| # |
| # Since: 2.12 |
| ## |
| { 'struct': 'BlockdevCreateOptionsVhdx', |
| 'data': { 'file': 'BlockdevRef', |
| 'size': 'size', |
| '*log-size': 'size', |
| '*block-size': 'size', |
| '*subformat': 'BlockdevVhdxSubformat', |
| '*block-state-zero': 'bool' } } |
| |
| ## |
| # @BlockdevVpcSubformat: |
| # |
| # @dynamic: Growing image file |
| # |
| # @fixed: Preallocated fixed-size image file |
| # |
| # Since: 2.12 |
| ## |
| { 'enum': 'BlockdevVpcSubformat', |
| 'data': [ 'dynamic', 'fixed' ] } |
| |
| ## |
| # @BlockdevCreateOptionsVpc: |
| # |
| # Driver specific image creation options for vpc (VHD). |
| # |
| # @file: Node to create the image format on |
| # |
| # @size: Size of the virtual disk in bytes |
| # |
| # @subformat: vhdx subformat (default: dynamic) |
| # |
| # @force-size: Force use of the exact byte size instead of rounding to |
| # the next size that can be represented in CHS geometry |
| # (default: false) |
| # |
| # Since: 2.12 |
| ## |
| { 'struct': 'BlockdevCreateOptionsVpc', |
| 'data': { 'file': 'BlockdevRef', |
| 'size': 'size', |
| '*subformat': 'BlockdevVpcSubformat', |
| '*force-size': 'bool' } } |
| |
| ## |
| # @BlockdevCreateOptions: |
| # |
| # Options for creating an image format on a given node. |
| # |
| # @driver: block driver to create the image format |
| # |
| # Since: 2.12 |
| ## |
| { 'union': 'BlockdevCreateOptions', |
| 'base': { |
| 'driver': 'BlockdevDriver' }, |
| 'discriminator': 'driver', |
| 'data': { |
| 'file': 'BlockdevCreateOptionsFile', |
| 'gluster': 'BlockdevCreateOptionsGluster', |
| 'luks': 'BlockdevCreateOptionsLUKS', |
| 'nfs': 'BlockdevCreateOptionsNfs', |
| 'parallels': 'BlockdevCreateOptionsParallels', |
| 'qcow': 'BlockdevCreateOptionsQcow', |
| 'qcow2': 'BlockdevCreateOptionsQcow2', |
| 'qed': 'BlockdevCreateOptionsQed', |
| 'rbd': 'BlockdevCreateOptionsRbd', |
| 'ssh': 'BlockdevCreateOptionsSsh', |
| 'vdi': 'BlockdevCreateOptionsVdi', |
| 'vhdx': 'BlockdevCreateOptionsVhdx', |
| 'vmdk': 'BlockdevCreateOptionsVmdk', |
| 'vpc': 'BlockdevCreateOptionsVpc' |
| } } |
| |
| ## |
| # @blockdev-create: |
| # |
| # Starts a job to create an image format on a given node. The job is |
| # automatically finalized, but a manual job-dismiss is required. |
| # |
| # @job-id: Identifier for the newly created job. |
| # |
| # @options: Options for the image creation. |
| # |
| # Since: 3.0 |
| ## |
| { 'command': 'blockdev-create', |
| 'data': { 'job-id': 'str', |
| 'options': 'BlockdevCreateOptions' }, |
| 'allow-preconfig': true } |
| |
| ## |
| # @BlockdevAmendOptionsLUKS: |
| # |
| # Driver specific image amend options for LUKS. |
| # |
| # Since: 5.1 |
| ## |
| { 'struct': 'BlockdevAmendOptionsLUKS', |
| 'base': 'QCryptoBlockAmendOptionsLUKS', |
| 'data': { } |
| } |
| |
| ## |
| # @BlockdevAmendOptionsQcow2: |
| # |
| # Driver specific image amend options for qcow2. For now, only |
| # encryption options can be amended |
| # |
| # @encrypt: Encryption options to be amended |
| # |
| # Since: 5.1 |
| ## |
| { 'struct': 'BlockdevAmendOptionsQcow2', |
| 'data': { '*encrypt': 'QCryptoBlockAmendOptions' } } |
| |
| ## |
| # @BlockdevAmendOptions: |
| # |
| # Options for amending an image format |
| # |
| # @driver: Block driver of the node to amend. |
| # |
| # Since: 5.1 |
| ## |
| { 'union': 'BlockdevAmendOptions', |
| 'base': { |
| 'driver': 'BlockdevDriver' }, |
| 'discriminator': 'driver', |
| 'data': { |
| 'luks': 'BlockdevAmendOptionsLUKS', |
| 'qcow2': 'BlockdevAmendOptionsQcow2' } } |
| |
| ## |
| # @x-blockdev-amend: |
| # |
| # Starts a job to amend format specific options of an existing open |
| # block device The job is automatically finalized, but a manual |
| # job-dismiss is required. |
| # |
| # @job-id: Identifier for the newly created job. |
| # |
| # @node-name: Name of the block node to work on |
| # |
| # @options: Options (driver specific) |
| # |
| # @force: Allow unsafe operations, format specific For luks that |
| # allows erase of the last active keyslot (permanent loss of |
| # data), and replacement of an active keyslot (possible loss of |
| # data if IO error happens) |
| # |
| # Features: |
| # |
| # @unstable: This command is experimental. |
| # |
| # Since: 5.1 |
| ## |
| { 'command': 'x-blockdev-amend', |
| 'data': { 'job-id': 'str', |
| 'node-name': 'str', |
| 'options': 'BlockdevAmendOptions', |
| '*force': 'bool' }, |
| 'features': [ 'unstable' ], |
| 'allow-preconfig': true } |
| |
| ## |
| # @BlockErrorAction: |
| # |
| # An enumeration of action that has been taken when a DISK I/O occurs |
| # |
| # @ignore: error has been ignored |
| # |
| # @report: error has been reported to the device |
| # |
| # @stop: error caused VM to be stopped |
| # |
| # Since: 2.1 |
| ## |
| { 'enum': 'BlockErrorAction', |
| 'data': [ 'ignore', 'report', 'stop' ] } |
| |
| ## |
| # @BLOCK_IMAGE_CORRUPTED: |
| # |
| # Emitted when a disk image is being marked corrupt. The image can be |
| # identified by its device or node name. The 'device' field is always |
| # present for compatibility reasons, but it can be empty ("") if the |
| # image does not have a device name associated. |
| # |
| # @device: device name. This is always present for compatibility |
| # reasons, but it can be empty ("") if the image does not have a |
| # device name associated. |
| # |
| # @node-name: node name (Since: 2.4) |
| # |
| # @msg: informative message for human consumption, such as the kind of |
| # corruption being detected. It should not be parsed by machine |
| # as it is not guaranteed to be stable |
| # |
| # @offset: if the corruption resulted from an image access, this is |
| # the host's access offset into the image |
| # |
| # @size: if the corruption resulted from an image access, this is the |
| # access size |
| # |
| # @fatal: if set, the image is marked corrupt and therefore unusable |
| # after this event and must be repaired (Since 2.2; before, every |
| # BLOCK_IMAGE_CORRUPTED event was fatal) |
| # |
| # .. note:: If action is "stop", a STOP event will eventually follow |
| # the BLOCK_IO_ERROR event. |
| # |
| # .. qmp-example:: |
| # |
| # <- { "event": "BLOCK_IMAGE_CORRUPTED", |
| # "data": { "device": "", "node-name": "drive", "fatal": false, |
| # "msg": "L2 table offset 0x2a2a2a00 unaligned (L1 index: 0)" }, |
| # "timestamp": { "seconds": 1648243240, "microseconds": 906060 } } |
| # |
| # Since: 1.7 |
| ## |
| { 'event': 'BLOCK_IMAGE_CORRUPTED', |
| 'data': { 'device' : 'str', |
| '*node-name' : 'str', |
| 'msg' : 'str', |
| '*offset' : 'int', |
| '*size' : 'int', |
| 'fatal' : 'bool' } } |
| |
| ## |
| # @BLOCK_IO_ERROR: |
| # |
| # Emitted when a disk I/O error occurs |
| # |
| # @device: device name. This is always present for compatibility |
| # reasons, but it can be empty ("") if the image does not have a |
| # device name associated. |
| # |
| # @node-name: node name. Note that errors may be reported for the |
| # root node that is directly attached to a guest device rather |
| # than for the node where the error occurred. The node name is |
| # not present if the drive is empty. (Since: 2.8) |
| # |
| # @operation: I/O operation |
| # |
| # @action: action that has been taken |
| # |
| # @nospace: true if I/O error was caused due to a no-space condition. |
| # This key is only present if query-block's io-status is present, |
| # please see query-block documentation for more information |
| # (since: 2.2) |
| # |
| # @reason: human readable string describing the error cause. (This |
| # field is a debugging aid for humans, it should not be parsed by |
| # applications) (since: 2.2) |
| # |
| # .. note:: If action is "stop", a STOP event will eventually follow |
| # the BLOCK_IO_ERROR event. |
| # |
| # Since: 0.13 |
| # |
| # .. qmp-example:: |
| # |
| # <- { "event": "BLOCK_IO_ERROR", |
| # "data": { "device": "ide0-hd1", |
| # "node-name": "#block212", |
| # "operation": "write", |
| # "action": "stop", |
| # "reason": "No space left on device" }, |
| # "timestamp": { "seconds": 1265044230, "microseconds": 450486 } } |
| ## |
| { 'event': 'BLOCK_IO_ERROR', |
| 'data': { 'device': 'str', '*node-name': 'str', |
| 'operation': 'IoOperationType', |
| 'action': 'BlockErrorAction', '*nospace': 'bool', |
| 'reason': 'str' } } |
| |
| ## |
| # @BLOCK_JOB_COMPLETED: |
| # |
| # Emitted when a block job has completed |
| # |
| # @type: job type |
| # |
| # @device: The job identifier. Originally the device name but other |
| # values are allowed since QEMU 2.7 |
| # |
| # @len: maximum progress value |
| # |
| # @offset: current progress value. On success this is equal to len. |
| # On failure this is less than len |
| # |
| # @speed: rate limit, bytes per second |
| # |
| # @error: error message. Only present on failure. This field |
| # contains a human-readable error message. There are no semantics |
| # other than that streaming has failed and clients should not try |
| # to interpret the error string |
| # |
| # Since: 1.1 |
| # |
| # .. qmp-example:: |
| # |
| # <- { "event": "BLOCK_JOB_COMPLETED", |
| # "data": { "type": "stream", "device": "virtio-disk0", |
| # "len": 10737418240, "offset": 10737418240, |
| # "speed": 0 }, |
| # "timestamp": { "seconds": 1267061043, "microseconds": 959568 } } |
| ## |
| { 'event': 'BLOCK_JOB_COMPLETED', |
| 'data': { 'type' : 'JobType', |
| 'device': 'str', |
| 'len' : 'int', |
| 'offset': 'int', |
| 'speed' : 'int', |
| '*error': 'str' } } |
| |
| ## |
| # @BLOCK_JOB_CANCELLED: |
| # |
| # Emitted when a block job has been cancelled |
| # |
| # @type: job type |
| # |
| # @device: The job identifier. Originally the device name but other |
| # values are allowed since QEMU 2.7 |
| # |
| # @len: maximum progress value |
| # |
| # @offset: current progress value. On success this is equal to len. |
| # On failure this is less than len |
| # |
| # @speed: rate limit, bytes per second |
| # |
| # Since: 1.1 |
| # |
| # .. qmp-example:: |
| # |
| # <- { "event": "BLOCK_JOB_CANCELLED", |
| # "data": { "type": "stream", "device": "virtio-disk0", |
| # "len": 10737418240, "offset": 134217728, |
| # "speed": 0 }, |
| # "timestamp": { "seconds": 1267061043, "microseconds": 959568 } } |
| ## |
| { 'event': 'BLOCK_JOB_CANCELLED', |
| 'data': { 'type' : 'JobType', |
| 'device': 'str', |
| 'len' : 'int', |
| 'offset': 'int', |
| 'speed' : 'int' } } |
| |
| ## |
| # @BLOCK_JOB_ERROR: |
| # |
| # Emitted when a block job encounters an error |
| # |
| # @device: The job identifier. Originally the device name but other |
| # values are allowed since QEMU 2.7 |
| # |
| # @operation: I/O operation |
| # |
| # @action: action that has been taken |
| # |
| # Since: 1.3 |
| # |
| # .. qmp-example:: |
| # |
| # <- { "event": "BLOCK_JOB_ERROR", |
| # "data": { "device": "ide0-hd1", |
| # "operation": "write", |
| # "action": "stop" }, |
| # "timestamp": { "seconds": 1265044230, "microseconds": 450486 } } |
| ## |
| { 'event': 'BLOCK_JOB_ERROR', |
| 'data': { 'device' : 'str', |
| 'operation': 'IoOperationType', |
| 'action' : 'BlockErrorAction' } } |
| |
| ## |
| # @BLOCK_JOB_READY: |
| # |
| # Emitted when a block job is ready to complete |
| # |
| # @type: job type |
| # |
| # @device: The job identifier. Originally the device name but other |
| # values are allowed since QEMU 2.7 |
| # |
| # @len: maximum progress value |
| # |
| # @offset: current progress value. On success this is equal to len. |
| # On failure this is less than len |
| # |
| # @speed: rate limit, bytes per second |
| # |
| # .. note:: The "ready to complete" status is always reset by a |
| # @BLOCK_JOB_ERROR event. |
| # |
| # Since: 1.3 |
| # |
| # .. qmp-example:: |
| # |
| # <- { "event": "BLOCK_JOB_READY", |
| # "data": { "device": "drive0", "type": "mirror", "speed": 0, |
| # "len": 2097152, "offset": 2097152 }, |
| # "timestamp": { "seconds": 1265044230, "microseconds": 450486 } } |
| ## |
| { 'event': 'BLOCK_JOB_READY', |
| 'data': { 'type' : 'JobType', |
| 'device': 'str', |
| 'len' : 'int', |
| 'offset': 'int', |
| 'speed' : 'int' } } |
| |
| ## |
| # @BLOCK_JOB_PENDING: |
| # |
| # Emitted when a block job is awaiting explicit authorization to |
| # finalize graph changes via @block-job-finalize. If this job is part |
| # of a transaction, it will not emit this event until the transaction |
| # has converged first. |
| # |
| # @type: job type |
| # |
| # @id: The job identifier. |
| # |
| # Since: 2.12 |
| # |
| # .. qmp-example:: |
| # |
| # <- { "event": "BLOCK_JOB_PENDING", |
| # "data": { "type": "mirror", "id": "backup_1" }, |
| # "timestamp": { "seconds": 1265044230, "microseconds": 450486 } } |
| ## |
| { 'event': 'BLOCK_JOB_PENDING', |
| 'data': { 'type' : 'JobType', |
| 'id' : 'str' } } |
| |
| ## |
| # @PreallocMode: |
| # |
| # Preallocation mode of QEMU image file |
| # |
| # @off: no preallocation |
| # |
| # @metadata: preallocate only for metadata |
| # |
| # @falloc: like @full preallocation but allocate disk space by |
| # posix_fallocate() rather than writing data. |
| # |
| # @full: preallocate all data by writing it to the device to ensure |
| # disk space is really available. This data may or may not be |
| # zero, depending on the image format and storage. @full |
| # preallocation also sets up metadata correctly. |
| # |
| # Since: 2.2 |
| ## |
| { 'enum': 'PreallocMode', |
| 'data': [ 'off', 'metadata', 'falloc', 'full' ] } |
| |
| ## |
| # @BLOCK_WRITE_THRESHOLD: |
| # |
| # Emitted when writes on block device reaches or exceeds the |
| # configured write threshold. For thin-provisioned devices, this |
| # means the device should be extended to avoid pausing for disk |
| # exhaustion. The event is one shot. Once triggered, it needs to be |
| # re-registered with another block-set-write-threshold command. |
| # |
| # @node-name: graph node name on which the threshold was exceeded. |
| # |
| # @amount-exceeded: amount of data which exceeded the threshold, in |
| # bytes. |
| # |
| # @write-threshold: last configured threshold, in bytes. |
| # |
| # Since: 2.3 |
| ## |
| { 'event': 'BLOCK_WRITE_THRESHOLD', |
| 'data': { 'node-name': 'str', |
| 'amount-exceeded': 'uint64', |
| 'write-threshold': 'uint64' } } |
| |
| ## |
| # @block-set-write-threshold: |
| # |
| # Change the write threshold for a block drive. An event will be |
| # delivered if a write to this block drive crosses the configured |
| # threshold. The threshold is an offset, thus must be non-negative. |
| # Default is no write threshold. Setting the threshold to zero |
| # disables it. |
| # |
| # This is useful to transparently resize thin-provisioned drives |
| # without the guest OS noticing. |
| # |
| # @node-name: graph node name on which the threshold must be set. |
| # |
| # @write-threshold: configured threshold for the block device, bytes. |
| # Use 0 to disable the threshold. |
| # |
| # Since: 2.3 |
| # |
| # .. qmp-example:: |
| # |
| # -> { "execute": "block-set-write-threshold", |
| # "arguments": { "node-name": "mydev", |
| # "write-threshold": 17179869184 } } |
| # <- { "return": {} } |
| ## |
| { 'command': 'block-set-write-threshold', |
| 'data': { 'node-name': 'str', 'write-threshold': 'uint64' }, |
| 'allow-preconfig': true } |
| |
| ## |
| # @x-blockdev-change: |
| # |
| # Dynamically reconfigure the block driver state graph. It can be |
| # used to add, remove, insert or replace a graph node. Currently only |
| # the Quorum driver implements this feature to add or remove its |
| # child. This is useful to fix a broken quorum child. |
| # |
| # If @node is specified, it will be inserted under @parent. @child |
| # may not be specified in this case. If both @parent and @child are |
| # specified but @node is not, @child will be detached from @parent. |
| # |
| # @parent: the id or name of the parent node. |
| # |
| # @child: the name of a child under the given parent node. |
| # |
| # @node: the name of the node that will be added. |
| # |
| # Features: |
| # |
| # @unstable: This command is experimental, and its API is not stable. |
| # It does not support all kinds of operations, all kinds of |
| # children, nor all block drivers. |
| # |
| # FIXME Removing children from a quorum node means introducing |
| # gaps in the child indices. This cannot be represented in the |
| # 'children' list of BlockdevOptionsQuorum, as returned by |
| # .bdrv_refresh_filename(). |
| # |
| # Warning: The data in a new quorum child MUST be consistent with |
| # that of the rest of the array. |
| # |
| # Since: 2.7 |
| # |
| # .. qmp-example:: |
| # :title: Add a new node to a quorum |
| # |
| # -> { "execute": "blockdev-add", |
| # "arguments": { |
| # "driver": "raw", |
| # "node-name": "new_node", |
| # "file": { "driver": "file", |
| # "filename": "test.raw" } } } |
| # <- { "return": {} } |
| # -> { "execute": "x-blockdev-change", |
| # "arguments": { "parent": "disk1", |
| # "node": "new_node" } } |
| # <- { "return": {} } |
| # |
| # .. qmp-example:: |
| # :title: Delete a quorum's node |
| # |
| # -> { "execute": "x-blockdev-change", |
| # "arguments": { "parent": "disk1", |
| # "child": "children.1" } } |
| # <- { "return": {} } |
| ## |
| { 'command': 'x-blockdev-change', |
| 'data' : { 'parent': 'str', |
| '*child': 'str', |
| '*node': 'str' }, |
| 'features': [ 'unstable' ], |
| 'allow-preconfig': true } |
| |
| ## |
| # @x-blockdev-set-iothread: |
| # |
| # Move @node and its children into the @iothread. If @iothread is |
| # null then move @node and its children into the main loop. |
| # |
| # The node must not be attached to a BlockBackend. |
| # |
| # @node-name: the name of the block driver node |
| # |
| # @iothread: the name of the IOThread object or null for the main loop |
| # |
| # @force: true if the node and its children should be moved when a |
| # BlockBackend is already attached |
| # |
| # Features: |
| # |
| # @unstable: This command is experimental and intended for test cases |
| # that need control over IOThreads only. |
| # |
| # Since: 2.12 |
| # |
| # .. qmp-example:: |
| # :title: Move a node into an IOThread |
| # |
| # -> { "execute": "x-blockdev-set-iothread", |
| # "arguments": { "node-name": "disk1", |
| # "iothread": "iothread0" } } |
| # <- { "return": {} } |
| # |
| # .. qmp-example:: |
| # :title: Move a node into the main loop |
| # |
| # -> { "execute": "x-blockdev-set-iothread", |
| # "arguments": { "node-name": "disk1", |
| # "iothread": null } } |
| # <- { "return": {} } |
| ## |
| { 'command': 'x-blockdev-set-iothread', |
| 'data' : { 'node-name': 'str', |
| 'iothread': 'StrOrNull', |
| '*force': 'bool' }, |
| 'features': [ 'unstable' ], |
| 'allow-preconfig': true } |
| |
| ## |
| # @QuorumOpType: |
| # |
| # An enumeration of the quorum operation types |
| # |
| # @read: read operation |
| # |
| # @write: write operation |
| # |
| # @flush: flush operation |
| # |
| # Since: 2.6 |
| ## |
| { 'enum': 'QuorumOpType', |
| 'data': [ 'read', 'write', 'flush' ] } |
| |
| ## |
| # @QUORUM_FAILURE: |
| # |
| # Emitted by the Quorum block driver if it fails to establish a quorum |
| # |
| # @reference: device name if defined else node name |
| # |
| # @sector-num: number of the first sector of the failed read operation |
| # |
| # @sectors-count: failed read operation sector count |
| # |
| # .. note:: This event is rate-limited. |
| # |
| # Since: 2.0 |
| # |
| # .. qmp-example:: |
| # |
| # <- { "event": "QUORUM_FAILURE", |
| # "data": { "reference": "usr1", "sector-num": 345435, "sectors-count": 5 }, |
| # "timestamp": { "seconds": 1344522075, "microseconds": 745528 } } |
| ## |
| { 'event': 'QUORUM_FAILURE', |
| 'data': { 'reference': 'str', 'sector-num': 'int', 'sectors-count': 'int' } } |
| |
| ## |
| # @QUORUM_REPORT_BAD: |
| # |
| # Emitted to report a corruption of a Quorum file |
| # |
| # @type: quorum operation type (Since 2.6) |
| # |
| # @error: error message. Only present on failure. This field |
| # contains a human-readable error message. There are no semantics |
| # other than that the block layer reported an error and clients |
| # should not try to interpret the error string. |
| # |
| # @node-name: the graph node name of the block driver state |
| # |
| # @sector-num: number of the first sector of the failed read operation |
| # |
| # @sectors-count: failed read operation sector count |
| # |
| # .. note:: This event is rate-limited. |
| # |
| # Since: 2.0 |
| # |
| # .. qmp-example:: |
| # :title: Read operation |
| # |
| # <- { "event": "QUORUM_REPORT_BAD", |
| # "data": { "node-name": "node0", "sector-num": 345435, "sectors-count": 5, |
| # "type": "read" }, |
| # "timestamp": { "seconds": 1344522075, "microseconds": 745528 } } |
| # |
| # .. qmp-example:: |
| # :title: Flush operation |
| # |
| # <- { "event": "QUORUM_REPORT_BAD", |
| # "data": { "node-name": "node0", "sector-num": 0, "sectors-count": 2097120, |
| # "type": "flush", "error": "Broken pipe" }, |
| # "timestamp": { "seconds": 1456406829, "microseconds": 291763 } } |
| ## |
| { 'event': 'QUORUM_REPORT_BAD', |
| 'data': { 'type': 'QuorumOpType', '*error': 'str', 'node-name': 'str', |
| 'sector-num': 'int', 'sectors-count': 'int' } } |
| |
| ## |
| # @BlockdevSnapshotInternal: |
| # |
| # @device: the device name or node-name of a root node to generate the |
| # snapshot from |
| # |
| # @name: the name of the internal snapshot to be created |
| # |
| # Since: 1.7 |
| ## |
| { 'struct': 'BlockdevSnapshotInternal', |
| 'data': { 'device': 'str', 'name': 'str' } } |
| |
| ## |
| # @blockdev-snapshot-internal-sync: |
| # |
| # Synchronously take an internal snapshot of a block device, when the |
| # format of the image used supports it. If the name is an empty |
| # string, or a snapshot with name already exists, the operation will |
| # fail. |
| # |
| # Errors: |
| # - If @device is not a valid block device, GenericError |
| # - If any snapshot matching @name exists, or @name is empty, |
| # GenericError |
| # - If the format of the image used does not support it, |
| # GenericError |
| # |
| # .. note:: Only some image formats such as qcow2 and rbd support |
| # internal snapshots. |
| # |
| # Since: 1.7 |
| # |
| # .. qmp-example:: |
| # |
| # -> { "execute": "blockdev-snapshot-internal-sync", |
| # "arguments": { "device": "ide-hd0", |
| # "name": "snapshot0" } |
| # } |
| # <- { "return": {} } |
| ## |
| { 'command': 'blockdev-snapshot-internal-sync', |
| 'data': 'BlockdevSnapshotInternal', |
| 'allow-preconfig': true } |
| |
| ## |
| # @blockdev-snapshot-delete-internal-sync: |
| # |
| # Synchronously delete an internal snapshot of a block device, when |
| # the format of the image used support it. The snapshot is identified |
| # by name or id or both. One of the name or id is required. Return |
| # SnapshotInfo for the successfully deleted snapshot. |
| # |
| # @device: the device name or node-name of a root node to delete the |
| # snapshot from |
| # |
| # @id: optional the snapshot's ID to be deleted |
| # |
| # @name: optional the snapshot's name to be deleted |
| # |
| # Returns: |
| # SnapshotInfo |
| # |
| # Errors: |
| # - If @device is not a valid block device, GenericError |
| # - If snapshot not found, GenericError |
| # - If the format of the image used does not support it, |
| # GenericError |
| # - If @id and @name are both not specified, GenericError |
| # |
| # Since: 1.7 |
| # |
| # .. qmp-example:: |
| # |
| # -> { "execute": "blockdev-snapshot-delete-internal-sync", |
| # "arguments": { "device": "ide-hd0", |
| # "name": "snapshot0" } |
| # } |
| # <- { "return": { |
| # "id": "1", |
| # "name": "snapshot0", |
| # "vm-state-size": 0, |
| # "date-sec": 1000012, |
| # "date-nsec": 10, |
| # "vm-clock-sec": 100, |
| # "vm-clock-nsec": 20, |
| # "icount": 220414 |
| # } |
| # } |
| ## |
| { 'command': 'blockdev-snapshot-delete-internal-sync', |
| 'data': { 'device': 'str', '*id': 'str', '*name': 'str'}, |
| 'returns': 'SnapshotInfo', |
| 'allow-preconfig': true } |
| |
| ## |
| # @DummyBlockCoreForceArrays: |
| # |
| # Not used by QMP; hack to let us use BlockGraphInfoList internally |
| # |
| # Since: 8.0 |
| ## |
| { 'struct': 'DummyBlockCoreForceArrays', |
| 'data': { 'unused-block-graph-info': ['BlockGraphInfo'] } } |
