| /* |
| * ioapic.c IOAPIC emulation logic |
| * |
| * Copyright (c) 2004-2005 Fabrice Bellard |
| * |
| * Split the ioapic logic from apic.c |
| * Xiantao Zhang <xiantao.zhang@intel.com> |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Lesser General Public |
| * License as published by the Free Software Foundation; either |
| * version 2 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Lesser General Public License for more details. |
| * |
| * You should have received a copy of the GNU Lesser General Public |
| * License along with this library; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston MA 02110-1301 USA |
| */ |
| |
| #include "hw.h" |
| #include "pc.h" |
| #include "qemu-timer.h" |
| #include "host-utils.h" |
| |
| //#define DEBUG_IOAPIC |
| |
| #define IOAPIC_NUM_PINS 0x18 |
| #define IOAPIC_LVT_MASKED (1<<16) |
| |
| #define IOAPIC_TRIGGER_EDGE 0 |
| #define IOAPIC_TRIGGER_LEVEL 1 |
| |
| /*io{apic,sapic} delivery mode*/ |
| #define IOAPIC_DM_FIXED 0x0 |
| #define IOAPIC_DM_LOWEST_PRIORITY 0x1 |
| #define IOAPIC_DM_PMI 0x2 |
| #define IOAPIC_DM_NMI 0x4 |
| #define IOAPIC_DM_INIT 0x5 |
| #define IOAPIC_DM_SIPI 0x5 |
| #define IOAPIC_DM_EXTINT 0x7 |
| |
| struct IOAPICState { |
| uint8_t id; |
| uint8_t ioregsel; |
| |
| uint32_t irr; |
| uint64_t ioredtbl[IOAPIC_NUM_PINS]; |
| }; |
| |
| static void ioapic_service(IOAPICState *s) |
| { |
| uint8_t i; |
| uint8_t trig_mode; |
| uint8_t vector; |
| uint8_t delivery_mode; |
| uint32_t mask; |
| uint64_t entry; |
| uint8_t dest; |
| uint8_t dest_mode; |
| uint8_t polarity; |
| |
| for (i = 0; i < IOAPIC_NUM_PINS; i++) { |
| mask = 1 << i; |
| if (s->irr & mask) { |
| entry = s->ioredtbl[i]; |
| if (!(entry & IOAPIC_LVT_MASKED)) { |
| trig_mode = ((entry >> 15) & 1); |
| dest = entry >> 56; |
| dest_mode = (entry >> 11) & 1; |
| delivery_mode = (entry >> 8) & 7; |
| polarity = (entry >> 13) & 1; |
| if (trig_mode == IOAPIC_TRIGGER_EDGE) |
| s->irr &= ~mask; |
| if (delivery_mode == IOAPIC_DM_EXTINT) |
| vector = pic_read_irq(isa_pic); |
| else |
| vector = entry & 0xff; |
| |
| apic_deliver_irq(dest, dest_mode, delivery_mode, |
| vector, polarity, trig_mode); |
| } |
| } |
| } |
| } |
| |
| void ioapic_set_irq(void *opaque, int vector, int level) |
| { |
| IOAPICState *s = opaque; |
| |
| /* ISA IRQs map to GSI 1-1 except for IRQ0 which maps |
| * to GSI 2. GSI maps to ioapic 1-1. This is not |
| * the cleanest way of doing it but it should work. */ |
| |
| if (vector == 0) |
| vector = 2; |
| |
| if (vector >= 0 && vector < IOAPIC_NUM_PINS) { |
| uint32_t mask = 1 << vector; |
| uint64_t entry = s->ioredtbl[vector]; |
| |
| if ((entry >> 15) & 1) { |
| /* level triggered */ |
| if (level) { |
| s->irr |= mask; |
| ioapic_service(s); |
| } else { |
| s->irr &= ~mask; |
| } |
| } else { |
| /* edge triggered */ |
| if (level) { |
| s->irr |= mask; |
| ioapic_service(s); |
| } |
| } |
| } |
| } |
| |
| static uint32_t ioapic_mem_readl(void *opaque, target_phys_addr_t addr) |
| { |
| IOAPICState *s = opaque; |
| int index; |
| uint32_t val = 0; |
| |
| addr &= 0xff; |
| if (addr == 0x00) { |
| val = s->ioregsel; |
| } else if (addr == 0x10) { |
| switch (s->ioregsel) { |
| case 0x00: |
| val = s->id << 24; |
| break; |
| case 0x01: |
| val = 0x11 | ((IOAPIC_NUM_PINS - 1) << 16); /* version 0x11 */ |
| break; |
| case 0x02: |
| val = 0; |
| break; |
| default: |
| index = (s->ioregsel - 0x10) >> 1; |
| if (index >= 0 && index < IOAPIC_NUM_PINS) { |
| if (s->ioregsel & 1) |
| val = s->ioredtbl[index] >> 32; |
| else |
| val = s->ioredtbl[index] & 0xffffffff; |
| } |
| } |
| #ifdef DEBUG_IOAPIC |
| printf("I/O APIC read: %08x = %08x\n", s->ioregsel, val); |
| #endif |
| } |
| return val; |
| } |
| |
| static void ioapic_mem_writel(void *opaque, target_phys_addr_t addr, uint32_t val) |
| { |
| IOAPICState *s = opaque; |
| int index; |
| |
| addr &= 0xff; |
| if (addr == 0x00) { |
| s->ioregsel = val; |
| return; |
| } else if (addr == 0x10) { |
| #ifdef DEBUG_IOAPIC |
| printf("I/O APIC write: %08x = %08x\n", s->ioregsel, val); |
| #endif |
| switch (s->ioregsel) { |
| case 0x00: |
| s->id = (val >> 24) & 0xff; |
| return; |
| case 0x01: |
| case 0x02: |
| return; |
| default: |
| index = (s->ioregsel - 0x10) >> 1; |
| if (index >= 0 && index < IOAPIC_NUM_PINS) { |
| if (s->ioregsel & 1) { |
| s->ioredtbl[index] &= 0xffffffff; |
| s->ioredtbl[index] |= (uint64_t)val << 32; |
| } else { |
| s->ioredtbl[index] &= ~0xffffffffULL; |
| s->ioredtbl[index] |= val; |
| } |
| ioapic_service(s); |
| } |
| } |
| } |
| } |
| |
| static void ioapic_save(QEMUFile *f, void *opaque) |
| { |
| IOAPICState *s = opaque; |
| int i; |
| |
| qemu_put_8s(f, &s->id); |
| qemu_put_8s(f, &s->ioregsel); |
| for (i = 0; i < IOAPIC_NUM_PINS; i++) { |
| qemu_put_be64s(f, &s->ioredtbl[i]); |
| } |
| } |
| |
| static int ioapic_load(QEMUFile *f, void *opaque, int version_id) |
| { |
| IOAPICState *s = opaque; |
| int i; |
| |
| if (version_id != 1) |
| return -EINVAL; |
| |
| qemu_get_8s(f, &s->id); |
| qemu_get_8s(f, &s->ioregsel); |
| for (i = 0; i < IOAPIC_NUM_PINS; i++) { |
| qemu_get_be64s(f, &s->ioredtbl[i]); |
| } |
| return 0; |
| } |
| |
| static void ioapic_reset(void *opaque) |
| { |
| IOAPICState *s = opaque; |
| int i; |
| |
| memset(s, 0, sizeof(*s)); |
| for(i = 0; i < IOAPIC_NUM_PINS; i++) |
| s->ioredtbl[i] = 1 << 16; /* mask LVT */ |
| } |
| |
| static CPUReadMemoryFunc *ioapic_mem_read[3] = { |
| ioapic_mem_readl, |
| ioapic_mem_readl, |
| ioapic_mem_readl, |
| }; |
| |
| static CPUWriteMemoryFunc *ioapic_mem_write[3] = { |
| ioapic_mem_writel, |
| ioapic_mem_writel, |
| ioapic_mem_writel, |
| }; |
| |
| IOAPICState *ioapic_init(void) |
| { |
| IOAPICState *s; |
| int io_memory; |
| |
| s = qemu_mallocz(sizeof(IOAPICState)); |
| ioapic_reset(s); |
| |
| io_memory = cpu_register_io_memory(0, ioapic_mem_read, |
| ioapic_mem_write, s); |
| cpu_register_physical_memory(0xfec00000, 0x1000, io_memory); |
| |
| register_savevm("ioapic", 0, 1, ioapic_save, ioapic_load, s); |
| qemu_register_reset(ioapic_reset, 0, s); |
| |
| return s; |
| } |