| /* |
| * VFIO utility |
| * |
| * Copyright 2016 - 2018 Red Hat, Inc. |
| * |
| * Authors: |
| * Fam Zheng <famz@redhat.com> |
| * |
| * This work is licensed under the terms of the GNU GPL, version 2 or later. |
| * See the COPYING file in the top-level directory. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include <sys/ioctl.h> |
| #include <linux/vfio.h> |
| #include "qapi/error.h" |
| #include "exec/ramlist.h" |
| #include "exec/cpu-common.h" |
| #include "trace.h" |
| #include "qemu/queue.h" |
| #include "qemu/error-report.h" |
| #include "standard-headers/linux/pci_regs.h" |
| #include "qemu/event_notifier.h" |
| #include "qemu/vfio-helpers.h" |
| #include "trace.h" |
| |
| #define QEMU_VFIO_DEBUG 0 |
| |
| #define QEMU_VFIO_IOVA_MIN 0x10000ULL |
| /* XXX: Once VFIO exposes the iova bit width in the IOMMU capability interface, |
| * we can use a runtime limit; alternatively it's also possible to do platform |
| * specific detection by reading sysfs entries. Until then, 39 is a safe bet. |
| **/ |
| #define QEMU_VFIO_IOVA_MAX (1ULL << 39) |
| |
| typedef struct { |
| /* Page aligned addr. */ |
| void *host; |
| size_t size; |
| uint64_t iova; |
| } IOVAMapping; |
| |
| struct QEMUVFIOState { |
| QemuMutex lock; |
| |
| /* These fields are protected by BQL */ |
| int container; |
| int group; |
| int device; |
| RAMBlockNotifier ram_notifier; |
| struct vfio_region_info config_region_info, bar_region_info[6]; |
| |
| /* These fields are protected by @lock */ |
| /* VFIO's IO virtual address space is managed by splitting into a few |
| * sections: |
| * |
| * --------------- <= 0 |
| * |xxxxxxxxxxxxx| |
| * |-------------| <= QEMU_VFIO_IOVA_MIN |
| * | | |
| * | Fixed | |
| * | | |
| * |-------------| <= low_water_mark |
| * | | |
| * | Free | |
| * | | |
| * |-------------| <= high_water_mark |
| * | | |
| * | Temp | |
| * | | |
| * |-------------| <= QEMU_VFIO_IOVA_MAX |
| * |xxxxxxxxxxxxx| |
| * |xxxxxxxxxxxxx| |
| * --------------- |
| * |
| * - Addresses lower than QEMU_VFIO_IOVA_MIN are reserved as invalid; |
| * |
| * - Fixed mappings of HVAs are assigned "low" IOVAs in the range of |
| * [QEMU_VFIO_IOVA_MIN, low_water_mark). Once allocated they will not be |
| * reclaimed - low_water_mark never shrinks; |
| * |
| * - IOVAs in range [low_water_mark, high_water_mark) are free; |
| * |
| * - IOVAs in range [high_water_mark, QEMU_VFIO_IOVA_MAX) are volatile |
| * mappings. At each qemu_vfio_dma_reset_temporary() call, the whole area |
| * is recycled. The caller should make sure I/O's depending on these |
| * mappings are completed before calling. |
| **/ |
| uint64_t low_water_mark; |
| uint64_t high_water_mark; |
| IOVAMapping *mappings; |
| int nr_mappings; |
| }; |
| |
| /** |
| * Find group file by PCI device address as specified @device, and return the |
| * path. The returned string is owned by caller and should be g_free'ed later. |
| */ |
| static char *sysfs_find_group_file(const char *device, Error **errp) |
| { |
| char *sysfs_link; |
| char *sysfs_group; |
| char *p; |
| char *path = NULL; |
| |
| sysfs_link = g_strdup_printf("/sys/bus/pci/devices/%s/iommu_group", device); |
| sysfs_group = g_malloc0(PATH_MAX); |
| if (readlink(sysfs_link, sysfs_group, PATH_MAX - 1) == -1) { |
| error_setg_errno(errp, errno, "Failed to find iommu group sysfs path"); |
| goto out; |
| } |
| p = strrchr(sysfs_group, '/'); |
| if (!p) { |
| error_setg(errp, "Failed to find iommu group number"); |
| goto out; |
| } |
| |
| path = g_strdup_printf("/dev/vfio/%s", p + 1); |
| out: |
| g_free(sysfs_link); |
| g_free(sysfs_group); |
| return path; |
| } |
| |
| static inline void assert_bar_index_valid(QEMUVFIOState *s, int index) |
| { |
| assert(index >= 0 && index < ARRAY_SIZE(s->bar_region_info)); |
| } |
| |
| static int qemu_vfio_pci_init_bar(QEMUVFIOState *s, int index, Error **errp) |
| { |
| assert_bar_index_valid(s, index); |
| s->bar_region_info[index] = (struct vfio_region_info) { |
| .index = VFIO_PCI_BAR0_REGION_INDEX + index, |
| .argsz = sizeof(struct vfio_region_info), |
| }; |
| if (ioctl(s->device, VFIO_DEVICE_GET_REGION_INFO, &s->bar_region_info[index])) { |
| error_setg_errno(errp, errno, "Failed to get BAR region info"); |
| return -errno; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * Map a PCI bar area. |
| */ |
| void *qemu_vfio_pci_map_bar(QEMUVFIOState *s, int index, |
| uint64_t offset, uint64_t size, |
| Error **errp) |
| { |
| void *p; |
| assert_bar_index_valid(s, index); |
| p = mmap(NULL, MIN(size, s->bar_region_info[index].size - offset), |
| PROT_READ | PROT_WRITE, MAP_SHARED, |
| s->device, s->bar_region_info[index].offset + offset); |
| if (p == MAP_FAILED) { |
| error_setg_errno(errp, errno, "Failed to map BAR region"); |
| p = NULL; |
| } |
| return p; |
| } |
| |
| /** |
| * Unmap a PCI bar area. |
| */ |
| void qemu_vfio_pci_unmap_bar(QEMUVFIOState *s, int index, void *bar, |
| uint64_t offset, uint64_t size) |
| { |
| if (bar) { |
| munmap(bar, MIN(size, s->bar_region_info[index].size - offset)); |
| } |
| } |
| |
| /** |
| * Initialize device IRQ with @irq_type and and register an event notifier. |
| */ |
| int qemu_vfio_pci_init_irq(QEMUVFIOState *s, EventNotifier *e, |
| int irq_type, Error **errp) |
| { |
| int r; |
| struct vfio_irq_set *irq_set; |
| size_t irq_set_size; |
| struct vfio_irq_info irq_info = { .argsz = sizeof(irq_info) }; |
| |
| irq_info.index = irq_type; |
| if (ioctl(s->device, VFIO_DEVICE_GET_IRQ_INFO, &irq_info)) { |
| error_setg_errno(errp, errno, "Failed to get device interrupt info"); |
| return -errno; |
| } |
| if (!(irq_info.flags & VFIO_IRQ_INFO_EVENTFD)) { |
| error_setg(errp, "Device interrupt doesn't support eventfd"); |
| return -EINVAL; |
| } |
| |
| irq_set_size = sizeof(*irq_set) + sizeof(int); |
| irq_set = g_malloc0(irq_set_size); |
| |
| /* Get to a known IRQ state */ |
| *irq_set = (struct vfio_irq_set) { |
| .argsz = irq_set_size, |
| .flags = VFIO_IRQ_SET_DATA_EVENTFD | VFIO_IRQ_SET_ACTION_TRIGGER, |
| .index = irq_info.index, |
| .start = 0, |
| .count = 1, |
| }; |
| |
| *(int *)&irq_set->data = event_notifier_get_fd(e); |
| r = ioctl(s->device, VFIO_DEVICE_SET_IRQS, irq_set); |
| g_free(irq_set); |
| if (r) { |
| error_setg_errno(errp, errno, "Failed to setup device interrupt"); |
| return -errno; |
| } |
| return 0; |
| } |
| |
| static int qemu_vfio_pci_read_config(QEMUVFIOState *s, void *buf, |
| int size, int ofs) |
| { |
| int ret; |
| |
| do { |
| ret = pread(s->device, buf, size, s->config_region_info.offset + ofs); |
| } while (ret == -1 && errno == EINTR); |
| return ret == size ? 0 : -errno; |
| } |
| |
| static int qemu_vfio_pci_write_config(QEMUVFIOState *s, void *buf, int size, int ofs) |
| { |
| int ret; |
| |
| do { |
| ret = pwrite(s->device, buf, size, s->config_region_info.offset + ofs); |
| } while (ret == -1 && errno == EINTR); |
| return ret == size ? 0 : -errno; |
| } |
| |
| static int qemu_vfio_init_pci(QEMUVFIOState *s, const char *device, |
| Error **errp) |
| { |
| int ret; |
| int i; |
| uint16_t pci_cmd; |
| struct vfio_group_status group_status = { .argsz = sizeof(group_status) }; |
| struct vfio_iommu_type1_info iommu_info = { .argsz = sizeof(iommu_info) }; |
| struct vfio_device_info device_info = { .argsz = sizeof(device_info) }; |
| char *group_file = NULL; |
| |
| /* Create a new container */ |
| s->container = open("/dev/vfio/vfio", O_RDWR); |
| |
| if (s->container == -1) { |
| error_setg_errno(errp, errno, "Failed to open /dev/vfio/vfio"); |
| return -errno; |
| } |
| if (ioctl(s->container, VFIO_GET_API_VERSION) != VFIO_API_VERSION) { |
| error_setg(errp, "Invalid VFIO version"); |
| ret = -EINVAL; |
| goto fail_container; |
| } |
| |
| if (!ioctl(s->container, VFIO_CHECK_EXTENSION, VFIO_TYPE1_IOMMU)) { |
| error_setg_errno(errp, errno, "VFIO IOMMU check failed"); |
| ret = -EINVAL; |
| goto fail_container; |
| } |
| |
| /* Open the group */ |
| group_file = sysfs_find_group_file(device, errp); |
| if (!group_file) { |
| ret = -EINVAL; |
| goto fail_container; |
| } |
| |
| s->group = open(group_file, O_RDWR); |
| if (s->group == -1) { |
| error_setg_errno(errp, errno, "Failed to open VFIO group file: %s", |
| group_file); |
| g_free(group_file); |
| ret = -errno; |
| goto fail_container; |
| } |
| g_free(group_file); |
| |
| /* Test the group is viable and available */ |
| if (ioctl(s->group, VFIO_GROUP_GET_STATUS, &group_status)) { |
| error_setg_errno(errp, errno, "Failed to get VFIO group status"); |
| ret = -errno; |
| goto fail; |
| } |
| |
| if (!(group_status.flags & VFIO_GROUP_FLAGS_VIABLE)) { |
| error_setg(errp, "VFIO group is not viable"); |
| ret = -EINVAL; |
| goto fail; |
| } |
| |
| /* Add the group to the container */ |
| if (ioctl(s->group, VFIO_GROUP_SET_CONTAINER, &s->container)) { |
| error_setg_errno(errp, errno, "Failed to add group to VFIO container"); |
| ret = -errno; |
| goto fail; |
| } |
| |
| /* Enable the IOMMU model we want */ |
| if (ioctl(s->container, VFIO_SET_IOMMU, VFIO_TYPE1_IOMMU)) { |
| error_setg_errno(errp, errno, "Failed to set VFIO IOMMU type"); |
| ret = -errno; |
| goto fail; |
| } |
| |
| /* Get additional IOMMU info */ |
| if (ioctl(s->container, VFIO_IOMMU_GET_INFO, &iommu_info)) { |
| error_setg_errno(errp, errno, "Failed to get IOMMU info"); |
| ret = -errno; |
| goto fail; |
| } |
| |
| s->device = ioctl(s->group, VFIO_GROUP_GET_DEVICE_FD, device); |
| |
| if (s->device < 0) { |
| error_setg_errno(errp, errno, "Failed to get device fd"); |
| ret = -errno; |
| goto fail; |
| } |
| |
| /* Test and setup the device */ |
| if (ioctl(s->device, VFIO_DEVICE_GET_INFO, &device_info)) { |
| error_setg_errno(errp, errno, "Failed to get device info"); |
| ret = -errno; |
| goto fail; |
| } |
| |
| if (device_info.num_regions < VFIO_PCI_CONFIG_REGION_INDEX) { |
| error_setg(errp, "Invalid device regions"); |
| ret = -EINVAL; |
| goto fail; |
| } |
| |
| s->config_region_info = (struct vfio_region_info) { |
| .index = VFIO_PCI_CONFIG_REGION_INDEX, |
| .argsz = sizeof(struct vfio_region_info), |
| }; |
| if (ioctl(s->device, VFIO_DEVICE_GET_REGION_INFO, &s->config_region_info)) { |
| error_setg_errno(errp, errno, "Failed to get config region info"); |
| ret = -errno; |
| goto fail; |
| } |
| |
| for (i = 0; i < 6; i++) { |
| ret = qemu_vfio_pci_init_bar(s, i, errp); |
| if (ret) { |
| goto fail; |
| } |
| } |
| |
| /* Enable bus master */ |
| ret = qemu_vfio_pci_read_config(s, &pci_cmd, sizeof(pci_cmd), PCI_COMMAND); |
| if (ret) { |
| goto fail; |
| } |
| pci_cmd |= PCI_COMMAND_MASTER; |
| ret = qemu_vfio_pci_write_config(s, &pci_cmd, sizeof(pci_cmd), PCI_COMMAND); |
| if (ret) { |
| goto fail; |
| } |
| return 0; |
| fail: |
| close(s->group); |
| fail_container: |
| close(s->container); |
| return ret; |
| } |
| |
| static void qemu_vfio_ram_block_added(RAMBlockNotifier *n, |
| void *host, size_t size) |
| { |
| QEMUVFIOState *s = container_of(n, QEMUVFIOState, ram_notifier); |
| trace_qemu_vfio_ram_block_added(s, host, size); |
| qemu_vfio_dma_map(s, host, size, false, NULL); |
| } |
| |
| static void qemu_vfio_ram_block_removed(RAMBlockNotifier *n, |
| void *host, size_t size) |
| { |
| QEMUVFIOState *s = container_of(n, QEMUVFIOState, ram_notifier); |
| if (host) { |
| trace_qemu_vfio_ram_block_removed(s, host, size); |
| qemu_vfio_dma_unmap(s, host); |
| } |
| } |
| |
| static int qemu_vfio_init_ramblock(const char *block_name, void *host_addr, |
| ram_addr_t offset, ram_addr_t length, |
| void *opaque) |
| { |
| int ret; |
| QEMUVFIOState *s = opaque; |
| |
| if (!host_addr) { |
| return 0; |
| } |
| ret = qemu_vfio_dma_map(s, host_addr, length, false, NULL); |
| if (ret) { |
| fprintf(stderr, "qemu_vfio_init_ramblock: failed %p %" PRId64 "\n", |
| host_addr, (uint64_t)length); |
| } |
| return 0; |
| } |
| |
| static void qemu_vfio_open_common(QEMUVFIOState *s) |
| { |
| s->ram_notifier.ram_block_added = qemu_vfio_ram_block_added; |
| s->ram_notifier.ram_block_removed = qemu_vfio_ram_block_removed; |
| ram_block_notifier_add(&s->ram_notifier); |
| s->low_water_mark = QEMU_VFIO_IOVA_MIN; |
| s->high_water_mark = QEMU_VFIO_IOVA_MAX; |
| qemu_ram_foreach_block(qemu_vfio_init_ramblock, s); |
| qemu_mutex_init(&s->lock); |
| } |
| |
| /** |
| * Open a PCI device, e.g. "0000:00:01.0". |
| */ |
| QEMUVFIOState *qemu_vfio_open_pci(const char *device, Error **errp) |
| { |
| int r; |
| QEMUVFIOState *s = g_new0(QEMUVFIOState, 1); |
| |
| r = qemu_vfio_init_pci(s, device, errp); |
| if (r) { |
| g_free(s); |
| return NULL; |
| } |
| qemu_vfio_open_common(s); |
| return s; |
| } |
| |
| static void qemu_vfio_dump_mapping(IOVAMapping *m) |
| { |
| if (QEMU_VFIO_DEBUG) { |
| printf(" vfio mapping %p %" PRIx64 " to %" PRIx64 "\n", m->host, |
| (uint64_t)m->size, (uint64_t)m->iova); |
| } |
| } |
| |
| static void qemu_vfio_dump_mappings(QEMUVFIOState *s) |
| { |
| int i; |
| |
| if (QEMU_VFIO_DEBUG) { |
| printf("vfio mappings\n"); |
| for (i = 0; i < s->nr_mappings; ++i) { |
| qemu_vfio_dump_mapping(&s->mappings[i]); |
| } |
| } |
| } |
| |
| /** |
| * Find the mapping entry that contains [host, host + size) and set @index to |
| * the position. If no entry contains it, @index is the position _after_ which |
| * to insert the new mapping. IOW, it is the index of the largest element that |
| * is smaller than @host, or -1 if no entry is. |
| */ |
| static IOVAMapping *qemu_vfio_find_mapping(QEMUVFIOState *s, void *host, |
| int *index) |
| { |
| IOVAMapping *p = s->mappings; |
| IOVAMapping *q = p ? p + s->nr_mappings - 1 : NULL; |
| IOVAMapping *mid; |
| trace_qemu_vfio_find_mapping(s, host); |
| if (!p) { |
| *index = -1; |
| return NULL; |
| } |
| while (true) { |
| mid = p + (q - p) / 2; |
| if (mid == p) { |
| break; |
| } |
| if (mid->host > host) { |
| q = mid; |
| } else if (mid->host < host) { |
| p = mid; |
| } else { |
| break; |
| } |
| } |
| if (mid->host > host) { |
| mid--; |
| } else if (mid < &s->mappings[s->nr_mappings - 1] |
| && (mid + 1)->host <= host) { |
| mid++; |
| } |
| *index = mid - &s->mappings[0]; |
| if (mid >= &s->mappings[0] && |
| mid->host <= host && mid->host + mid->size > host) { |
| assert(mid < &s->mappings[s->nr_mappings]); |
| return mid; |
| } |
| /* At this point *index + 1 is the right position to insert the new |
| * mapping.*/ |
| return NULL; |
| } |
| |
| /** |
| * Allocate IOVA and and create a new mapping record and insert it in @s. |
| */ |
| static IOVAMapping *qemu_vfio_add_mapping(QEMUVFIOState *s, |
| void *host, size_t size, |
| int index, uint64_t iova) |
| { |
| int shift; |
| IOVAMapping m = {.host = host, .size = size, .iova = iova}; |
| IOVAMapping *insert; |
| |
| assert(QEMU_IS_ALIGNED(size, getpagesize())); |
| assert(QEMU_IS_ALIGNED(s->low_water_mark, getpagesize())); |
| assert(QEMU_IS_ALIGNED(s->high_water_mark, getpagesize())); |
| trace_qemu_vfio_new_mapping(s, host, size, index, iova); |
| |
| assert(index >= 0); |
| s->nr_mappings++; |
| s->mappings = g_renew(IOVAMapping, s->mappings, s->nr_mappings); |
| insert = &s->mappings[index]; |
| shift = s->nr_mappings - index - 1; |
| if (shift) { |
| memmove(insert + 1, insert, shift * sizeof(s->mappings[0])); |
| } |
| *insert = m; |
| return insert; |
| } |
| |
| /* Do the DMA mapping with VFIO. */ |
| static int qemu_vfio_do_mapping(QEMUVFIOState *s, void *host, size_t size, |
| uint64_t iova) |
| { |
| struct vfio_iommu_type1_dma_map dma_map = { |
| .argsz = sizeof(dma_map), |
| .flags = VFIO_DMA_MAP_FLAG_READ | VFIO_DMA_MAP_FLAG_WRITE, |
| .iova = iova, |
| .vaddr = (uintptr_t)host, |
| .size = size, |
| }; |
| trace_qemu_vfio_do_mapping(s, host, size, iova); |
| |
| if (ioctl(s->container, VFIO_IOMMU_MAP_DMA, &dma_map)) { |
| error_report("VFIO_MAP_DMA: %d", -errno); |
| return -errno; |
| } |
| return 0; |
| } |
| |
| /** |
| * Undo the DMA mapping from @s with VFIO, and remove from mapping list. |
| */ |
| static void qemu_vfio_undo_mapping(QEMUVFIOState *s, IOVAMapping *mapping, |
| Error **errp) |
| { |
| int index; |
| struct vfio_iommu_type1_dma_unmap unmap = { |
| .argsz = sizeof(unmap), |
| .flags = 0, |
| .iova = mapping->iova, |
| .size = mapping->size, |
| }; |
| |
| index = mapping - s->mappings; |
| assert(mapping->size > 0); |
| assert(QEMU_IS_ALIGNED(mapping->size, getpagesize())); |
| assert(index >= 0 && index < s->nr_mappings); |
| if (ioctl(s->container, VFIO_IOMMU_UNMAP_DMA, &unmap)) { |
| error_setg(errp, "VFIO_UNMAP_DMA failed: %d", -errno); |
| } |
| memmove(mapping, &s->mappings[index + 1], |
| sizeof(s->mappings[0]) * (s->nr_mappings - index - 1)); |
| s->nr_mappings--; |
| s->mappings = g_renew(IOVAMapping, s->mappings, s->nr_mappings); |
| } |
| |
| /* Check if the mapping list is (ascending) ordered. */ |
| static bool qemu_vfio_verify_mappings(QEMUVFIOState *s) |
| { |
| int i; |
| if (QEMU_VFIO_DEBUG) { |
| for (i = 0; i < s->nr_mappings - 1; ++i) { |
| if (!(s->mappings[i].host < s->mappings[i + 1].host)) { |
| fprintf(stderr, "item %d not sorted!\n", i); |
| qemu_vfio_dump_mappings(s); |
| return false; |
| } |
| if (!(s->mappings[i].host + s->mappings[i].size <= |
| s->mappings[i + 1].host)) { |
| fprintf(stderr, "item %d overlap with next!\n", i); |
| qemu_vfio_dump_mappings(s); |
| return false; |
| } |
| } |
| } |
| return true; |
| } |
| |
| /* Map [host, host + size) area into a contiguous IOVA address space, and store |
| * the result in @iova if not NULL. The caller need to make sure the area is |
| * aligned to page size, and mustn't overlap with existing mapping areas (split |
| * mapping status within this area is not allowed). |
| */ |
| int qemu_vfio_dma_map(QEMUVFIOState *s, void *host, size_t size, |
| bool temporary, uint64_t *iova) |
| { |
| int ret = 0; |
| int index; |
| IOVAMapping *mapping; |
| uint64_t iova0; |
| |
| assert(QEMU_PTR_IS_ALIGNED(host, getpagesize())); |
| assert(QEMU_IS_ALIGNED(size, getpagesize())); |
| trace_qemu_vfio_dma_map(s, host, size, temporary, iova); |
| qemu_mutex_lock(&s->lock); |
| mapping = qemu_vfio_find_mapping(s, host, &index); |
| if (mapping) { |
| iova0 = mapping->iova + ((uint8_t *)host - (uint8_t *)mapping->host); |
| } else { |
| if (s->high_water_mark - s->low_water_mark + 1 < size) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| if (!temporary) { |
| iova0 = s->low_water_mark; |
| mapping = qemu_vfio_add_mapping(s, host, size, index + 1, iova0); |
| if (!mapping) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| assert(qemu_vfio_verify_mappings(s)); |
| ret = qemu_vfio_do_mapping(s, host, size, iova0); |
| if (ret) { |
| qemu_vfio_undo_mapping(s, mapping, NULL); |
| goto out; |
| } |
| s->low_water_mark += size; |
| qemu_vfio_dump_mappings(s); |
| } else { |
| iova0 = s->high_water_mark - size; |
| ret = qemu_vfio_do_mapping(s, host, size, iova0); |
| if (ret) { |
| goto out; |
| } |
| s->high_water_mark -= size; |
| } |
| } |
| if (iova) { |
| *iova = iova0; |
| } |
| out: |
| qemu_mutex_unlock(&s->lock); |
| return ret; |
| } |
| |
| /* Reset the high watermark and free all "temporary" mappings. */ |
| int qemu_vfio_dma_reset_temporary(QEMUVFIOState *s) |
| { |
| struct vfio_iommu_type1_dma_unmap unmap = { |
| .argsz = sizeof(unmap), |
| .flags = 0, |
| .iova = s->high_water_mark, |
| .size = QEMU_VFIO_IOVA_MAX - s->high_water_mark, |
| }; |
| trace_qemu_vfio_dma_reset_temporary(s); |
| qemu_mutex_lock(&s->lock); |
| if (ioctl(s->container, VFIO_IOMMU_UNMAP_DMA, &unmap)) { |
| error_report("VFIO_UNMAP_DMA: %d", -errno); |
| qemu_mutex_unlock(&s->lock); |
| return -errno; |
| } |
| s->high_water_mark = QEMU_VFIO_IOVA_MAX; |
| qemu_mutex_unlock(&s->lock); |
| return 0; |
| } |
| |
| /* Unmapping the whole area that was previously mapped with |
| * qemu_vfio_dma_map(). */ |
| void qemu_vfio_dma_unmap(QEMUVFIOState *s, void *host) |
| { |
| int index = 0; |
| IOVAMapping *m; |
| |
| if (!host) { |
| return; |
| } |
| |
| trace_qemu_vfio_dma_unmap(s, host); |
| qemu_mutex_lock(&s->lock); |
| m = qemu_vfio_find_mapping(s, host, &index); |
| if (!m) { |
| goto out; |
| } |
| qemu_vfio_undo_mapping(s, m, NULL); |
| out: |
| qemu_mutex_unlock(&s->lock); |
| } |
| |
| static void qemu_vfio_reset(QEMUVFIOState *s) |
| { |
| ioctl(s->device, VFIO_DEVICE_RESET); |
| } |
| |
| /* Close and free the VFIO resources. */ |
| void qemu_vfio_close(QEMUVFIOState *s) |
| { |
| int i; |
| |
| if (!s) { |
| return; |
| } |
| for (i = 0; i < s->nr_mappings; ++i) { |
| qemu_vfio_undo_mapping(s, &s->mappings[i], NULL); |
| } |
| ram_block_notifier_remove(&s->ram_notifier); |
| qemu_vfio_reset(s); |
| close(s->device); |
| close(s->group); |
| close(s->container); |
| } |