|  | # QEMU functional tests: | 
|  | # Tests that are put in the 'quick' category are run by default during | 
|  | # 'make check'. Everything that should not be run during 'make check' | 
|  | # (e.g. tests that fetch assets from the internet) should be put into | 
|  | # the 'thorough' category instead. | 
|  |  | 
|  | # Most tests run too slow with TCI enabled, so skip the functional tests there | 
|  | if get_option('tcg_interpreter') | 
|  | subdir_done() | 
|  | endif | 
|  |  | 
|  | # Timeouts for individual tests that can be slow e.g. with debugging enabled | 
|  | test_timeouts = { | 
|  | 'aarch64_aspeed_ast2700' : 600, | 
|  | 'aarch64_aspeed_ast2700fc' : 600, | 
|  | 'aarch64_raspi4' : 480, | 
|  | 'aarch64_reverse_debug' : 180, | 
|  | 'aarch64_rme_virt' : 1200, | 
|  | 'aarch64_rme_sbsaref' : 1200, | 
|  | 'aarch64_sbsaref_alpine' : 1200, | 
|  | 'aarch64_sbsaref_freebsd' : 720, | 
|  | 'aarch64_smmu' : 720, | 
|  | 'aarch64_tuxrun' : 240, | 
|  | 'aarch64_virt' : 360, | 
|  | 'aarch64_virt_gpu' : 480, | 
|  | 'acpi_bits' : 420, | 
|  | 'arm_aspeed_palmetto' : 120, | 
|  | 'arm_aspeed_romulus' : 120, | 
|  | 'arm_aspeed_witherspoon' : 120, | 
|  | 'arm_aspeed_ast2500' : 720, | 
|  | 'arm_aspeed_ast2600' : 1200, | 
|  | 'arm_aspeed_bletchley' : 480, | 
|  | 'arm_aspeed_rainier' : 480, | 
|  | 'arm_bpim2u' : 500, | 
|  | 'arm_collie' : 180, | 
|  | 'arm_cubieboard' : 360, | 
|  | 'arm_orangepi' : 540, | 
|  | 'arm_quanta_gsj' : 240, | 
|  | 'arm_raspi2' : 120, | 
|  | 'arm_replay' : 240, | 
|  | 'arm_tuxrun' : 240, | 
|  | 'arm_sx1' : 360, | 
|  | 'intel_iommu': 300, | 
|  | 'mips_malta' : 480, | 
|  | 'mipsel_malta' : 420, | 
|  | 'mipsel_replay' : 480, | 
|  | 'mips64_malta' : 240, | 
|  | 'mips64el_malta' : 420, | 
|  | 'mips64el_replay' : 180, | 
|  | 'netdev_ethtool' : 180, | 
|  | 'ppc_40p' : 240, | 
|  | 'ppc64_hv' : 1000, | 
|  | 'ppc64_powernv' : 480, | 
|  | 'ppc64_pseries' : 480, | 
|  | 'ppc64_replay' : 210, | 
|  | 'ppc64_tuxrun' : 420, | 
|  | 'ppc64_mac99' : 120, | 
|  | 'riscv64_tuxrun' : 120, | 
|  | 's390x_ccw_virtio' : 420, | 
|  | 'sh4_tuxrun' : 240, | 
|  | 'virtio_balloon': 120, | 
|  | 'x86_64_kvm_xen' : 180, | 
|  | 'x86_64_replay' : 480, | 
|  | } | 
|  |  | 
|  | tests_generic_system = [ | 
|  | 'empty_cpu_model', | 
|  | 'info_usernet', | 
|  | 'version', | 
|  | ] | 
|  |  | 
|  | tests_generic_linuxuser = [ | 
|  | ] | 
|  |  | 
|  | tests_generic_bsduser = [ | 
|  | ] | 
|  |  | 
|  | tests_aarch64_system_quick = [ | 
|  | 'migration', | 
|  | ] | 
|  |  | 
|  | tests_aarch64_system_thorough = [ | 
|  | 'aarch64_aspeed_ast2700', | 
|  | 'aarch64_aspeed_ast2700fc', | 
|  | 'aarch64_raspi3', | 
|  | 'aarch64_raspi4', | 
|  | 'aarch64_replay', | 
|  | 'aarch64_reverse_debug', | 
|  | 'aarch64_rme_virt', | 
|  | 'aarch64_rme_sbsaref', | 
|  | 'aarch64_sbsaref', | 
|  | 'aarch64_sbsaref_alpine', | 
|  | 'aarch64_sbsaref_freebsd', | 
|  | 'aarch64_smmu', | 
|  | 'aarch64_tcg_plugins', | 
|  | 'aarch64_tuxrun', | 
|  | 'aarch64_virt', | 
|  | 'aarch64_virt_gpu', | 
|  | 'aarch64_xen', | 
|  | 'aarch64_xlnx_versal', | 
|  | 'multiprocess', | 
|  | ] | 
|  |  | 
|  | tests_alpha_system_quick = [ | 
|  | 'migration', | 
|  | ] | 
|  |  | 
|  | tests_alpha_system_thorough = [ | 
|  | 'alpha_clipper', | 
|  | 'alpha_replay', | 
|  | ] | 
|  |  | 
|  | tests_arm_system_quick = [ | 
|  | 'migration', | 
|  | ] | 
|  |  | 
|  | tests_arm_system_thorough = [ | 
|  | 'arm_aspeed_ast1030', | 
|  | 'arm_aspeed_palmetto', | 
|  | 'arm_aspeed_romulus', | 
|  | 'arm_aspeed_witherspoon', | 
|  | 'arm_aspeed_ast2500', | 
|  | 'arm_aspeed_ast2600', | 
|  | 'arm_aspeed_bletchley', | 
|  | 'arm_aspeed_rainier', | 
|  | 'arm_bpim2u', | 
|  | 'arm_canona1100', | 
|  | 'arm_collie', | 
|  | 'arm_cubieboard', | 
|  | 'arm_emcraft_sf2', | 
|  | 'arm_integratorcp', | 
|  | 'arm_microbit', | 
|  | 'arm_orangepi', | 
|  | 'arm_quanta_gsj', | 
|  | 'arm_raspi2', | 
|  | 'arm_replay', | 
|  | 'arm_smdkc210', | 
|  | 'arm_sx1', | 
|  | 'arm_vexpress', | 
|  | 'arm_virt', | 
|  | 'arm_tuxrun', | 
|  | ] | 
|  |  | 
|  | tests_arm_linuxuser_thorough = [ | 
|  | 'arm_bflt', | 
|  | ] | 
|  |  | 
|  | tests_avr_system_thorough = [ | 
|  | 'avr_mega2560', | 
|  | ] | 
|  |  | 
|  | tests_hppa_system_quick = [ | 
|  | 'hppa_seabios', | 
|  | ] | 
|  |  | 
|  | tests_i386_system_quick = [ | 
|  | 'migration', | 
|  | ] | 
|  |  | 
|  | tests_i386_system_thorough = [ | 
|  | 'i386_replay', | 
|  | 'i386_tuxrun', | 
|  | ] | 
|  |  | 
|  | tests_loongarch64_system_thorough = [ | 
|  | 'loongarch64_virt', | 
|  | ] | 
|  |  | 
|  | tests_m68k_system_thorough = [ | 
|  | 'm68k_mcf5208evb', | 
|  | 'm68k_nextcube', | 
|  | 'm68k_replay', | 
|  | 'm68k_q800', | 
|  | 'm68k_tuxrun', | 
|  | ] | 
|  |  | 
|  | tests_microblaze_system_thorough = [ | 
|  | 'microblaze_replay', | 
|  | 'microblaze_s3adsp1800' | 
|  | ] | 
|  |  | 
|  | tests_microblazeel_system_thorough = [ | 
|  | 'microblazeel_s3adsp1800' | 
|  | ] | 
|  |  | 
|  | tests_mips_system_thorough = [ | 
|  | 'mips_malta', | 
|  | 'mips_replay', | 
|  | 'mips_tuxrun', | 
|  | ] | 
|  |  | 
|  | tests_mipsel_system_thorough = [ | 
|  | 'mipsel_malta', | 
|  | 'mipsel_replay', | 
|  | 'mipsel_tuxrun', | 
|  | ] | 
|  |  | 
|  | tests_mips64_system_thorough = [ | 
|  | 'mips64_malta', | 
|  | 'mips64_tuxrun', | 
|  | ] | 
|  |  | 
|  | tests_mips64el_system_thorough = [ | 
|  | 'mips64el_fuloong2e', | 
|  | 'mips64el_loongson3v', | 
|  | 'mips64el_malta', | 
|  | 'mips64el_replay', | 
|  | 'mips64el_tuxrun', | 
|  | ] | 
|  |  | 
|  | tests_or1k_system_thorough = [ | 
|  | 'or1k_replay', | 
|  | 'or1k_sim', | 
|  | ] | 
|  |  | 
|  | tests_ppc_system_quick = [ | 
|  | 'migration', | 
|  | 'ppc_74xx', | 
|  | ] | 
|  |  | 
|  | tests_ppc_system_thorough = [ | 
|  | 'ppc_40p', | 
|  | 'ppc_amiga', | 
|  | 'ppc_bamboo', | 
|  | 'ppc_mac', | 
|  | 'ppc_mpc8544ds', | 
|  | 'ppc_replay', | 
|  | 'ppc_sam460ex', | 
|  | 'ppc_tuxrun', | 
|  | 'ppc_virtex_ml507', | 
|  | ] | 
|  |  | 
|  | tests_ppc64_system_quick = [ | 
|  | 'migration', | 
|  | ] | 
|  |  | 
|  | tests_ppc64_system_thorough = [ | 
|  | 'ppc64_e500', | 
|  | 'ppc64_hv', | 
|  | 'ppc64_powernv', | 
|  | 'ppc64_pseries', | 
|  | 'ppc64_replay', | 
|  | 'ppc64_reverse_debug', | 
|  | 'ppc64_tuxrun', | 
|  | 'ppc64_mac99', | 
|  | ] | 
|  |  | 
|  | tests_riscv32_system_quick = [ | 
|  | 'migration', | 
|  | 'riscv_opensbi', | 
|  | ] | 
|  |  | 
|  | tests_riscv32_system_thorough = [ | 
|  | 'riscv32_tuxrun', | 
|  | ] | 
|  |  | 
|  | tests_riscv64_system_quick = [ | 
|  | 'migration', | 
|  | 'riscv_opensbi', | 
|  | ] | 
|  |  | 
|  | tests_riscv64_system_thorough = [ | 
|  | 'riscv64_tuxrun', | 
|  | ] | 
|  |  | 
|  | tests_rx_system_thorough = [ | 
|  | 'rx_gdbsim', | 
|  | ] | 
|  |  | 
|  | tests_s390x_system_thorough = [ | 
|  | 's390x_ccw_virtio', | 
|  | 's390x_replay', | 
|  | 's390x_topology', | 
|  | 's390x_tuxrun', | 
|  | ] | 
|  |  | 
|  | tests_sh4_system_thorough = [ | 
|  | 'sh4_r2d', | 
|  | 'sh4_tuxrun', | 
|  | ] | 
|  |  | 
|  | tests_sh4eb_system_thorough = [ | 
|  | 'sh4eb_r2d', | 
|  | ] | 
|  |  | 
|  | tests_sparc_system_quick = [ | 
|  | 'migration', | 
|  | ] | 
|  |  | 
|  | tests_sparc_system_thorough = [ | 
|  | 'sparc_replay', | 
|  | 'sparc_sun4m', | 
|  | ] | 
|  |  | 
|  | tests_sparc64_system_quick = [ | 
|  | 'migration', | 
|  | ] | 
|  |  | 
|  | tests_sparc64_system_thorough = [ | 
|  | 'sparc64_sun4u', | 
|  | 'sparc64_tuxrun', | 
|  | ] | 
|  |  | 
|  | tests_x86_64_system_quick = [ | 
|  | 'cpu_queries', | 
|  | 'mem_addr_space', | 
|  | 'migration', | 
|  | 'pc_cpu_hotplug_props', | 
|  | 'virtio_version', | 
|  | 'x86_cpu_model_versions', | 
|  | 'vnc', | 
|  | ] | 
|  |  | 
|  | tests_x86_64_system_thorough = [ | 
|  | 'acpi_bits', | 
|  | 'intel_iommu', | 
|  | 'linux_initrd', | 
|  | 'multiprocess', | 
|  | 'netdev_ethtool', | 
|  | 'virtio_balloon', | 
|  | 'virtio_gpu', | 
|  | 'x86_64_hotplug_blk', | 
|  | 'x86_64_hotplug_cpu', | 
|  | 'x86_64_kvm_xen', | 
|  | 'x86_64_replay', | 
|  | 'x86_64_reverse_debug', | 
|  | 'x86_64_tuxrun', | 
|  | ] | 
|  |  | 
|  | tests_xtensa_system_thorough = [ | 
|  | 'xtensa_lx60', | 
|  | 'xtensa_replay', | 
|  | ] | 
|  |  | 
|  | precache_all = [] | 
|  | foreach speed : ['quick', 'thorough'] | 
|  | foreach dir : target_dirs | 
|  |  | 
|  | target_base = dir.split('-')[0] | 
|  |  | 
|  | if dir.endswith('-softmmu') | 
|  | sysmode = 'system' | 
|  | test_emulator = emulators['qemu-system-' + target_base] | 
|  | elif dir.endswith('-linux-user') | 
|  | sysmode = 'linuxuser' | 
|  | test_emulator = emulators['qemu-' + target_base] | 
|  | elif dir.endswith('-bsd-user') | 
|  | sysmode = 'bsduser' | 
|  | test_emulator = emulators['qemu-' + target_base] | 
|  | else | 
|  | continue | 
|  | endif | 
|  |  | 
|  | if speed == 'quick' | 
|  | suites = ['func-quick', 'func-' + target_base] | 
|  | target_tests = get_variable('tests_' + target_base + '_' + sysmode + '_quick', []) \ | 
|  | + get_variable('tests_generic_' + sysmode) | 
|  | else | 
|  | suites = ['func-' + speed, 'func-' + target_base + '-' + speed, speed] | 
|  | target_tests = get_variable('tests_' + target_base + '_' + sysmode + '_' + speed, []) | 
|  | endif | 
|  |  | 
|  | test_deps = roms | 
|  | test_env = environment() | 
|  | if have_tools | 
|  | test_env.set('QEMU_TEST_QEMU_IMG', meson.global_build_root() / 'qemu-img') | 
|  | test_deps += [qemu_img] | 
|  | endif | 
|  | test_env.set('QEMU_TEST_QEMU_BINARY', test_emulator.full_path()) | 
|  | test_env.set('QEMU_BUILD_ROOT', meson.project_build_root()) | 
|  | test_env.set('PYTHONPATH', meson.project_source_root() / 'python:' + | 
|  | meson.current_source_dir()) | 
|  |  | 
|  | foreach test : target_tests | 
|  | testname = '@0@-@1@'.format(target_base, test) | 
|  | testfile = 'test_' + test + '.py' | 
|  | testpath = meson.current_source_dir() / testfile | 
|  | teststamp = testname + '.tstamp' | 
|  | test_precache_env = environment() | 
|  | test_precache_env.set('QEMU_TEST_PRECACHE', meson.current_build_dir() / teststamp) | 
|  | test_precache_env.set('PYTHONPATH', meson.project_source_root() / 'python:' + | 
|  | meson.current_source_dir()) | 
|  | precache = custom_target('func-precache-' + testname, | 
|  | output: teststamp, | 
|  | command: [python, testpath], | 
|  | depend_files: files(testpath), | 
|  | build_by_default: false, | 
|  | env: test_precache_env) | 
|  | precache_all += precache | 
|  |  | 
|  | # Ideally we would add 'precache' to 'depends' here, such that | 
|  | # 'build_by_default: false' lets the pre-caching automatically | 
|  | # run immediately before the test runs. In practice this is | 
|  | # broken in meson, with it running the pre-caching in the normal | 
|  | # compile phase https://github.com/mesonbuild/meson/issues/2518 | 
|  | # If the above bug ever gets fixed, when QEMU changes the min | 
|  | # meson version, add the 'depends' and remove the custom | 
|  | # 'run_target' logic below & in Makefile.include | 
|  | test('func-' + testname, | 
|  | python, | 
|  | depends: [test_deps, test_emulator, emulator_modules, plugin_modules], | 
|  | env: test_env, | 
|  | args: [testpath], | 
|  | protocol: 'tap', | 
|  | timeout: test_timeouts.get(test, 90), | 
|  | priority: test_timeouts.get(test, 90), | 
|  | suite: suites) | 
|  | endforeach | 
|  | endforeach | 
|  | endforeach | 
|  |  | 
|  | run_target('precache-functional', | 
|  | depends: precache_all, | 
|  | command: ['true']) |