qapi-schema.json

# -*- Mode: Python -*-
#
# QAPI Schema

##
# @ErrorClass
#
# QEMU error classes
#
# @GenericError: this is used for errors that don't require a specific error
#                class. This should be the default case for most errors
#
# @CommandNotFound: the requested command has not been found
#
# @DeviceEncrypted: the requested operation can't be fulfilled because the
#                   selected device is encrypted
#
# @DeviceNotActive: a device has failed to be become active
#
# @DeviceNotFound: the requested device has not been found
#
# @KVMMissingCap: the requested operation can't be fulfilled because a
#                 required KVM capability is missing
#
# @MigrationExpected: the requested operation can't be fulfilled because a
#                     migration process is expected
#
# Since: 1.2
##
{ 'enum': 'ErrorClass',
  'data': [ 'GenericError', 'CommandNotFound', 'DeviceEncrypted',
            'DeviceNotActive', 'DeviceNotFound', 'KVMMissingCap',
            'MigrationExpected' ] }

##
# @NameInfo:
#
# Guest name information.
#
# @name: #optional The name of the guest
#
# Since 0.14.0
##
{ 'type': 'NameInfo', 'data': {'*name': 'str'} }

##
# @query-name:
#
# Return the name information of a guest.
#
# Returns: @NameInfo of the guest
#
# Since 0.14.0
##
{ 'command': 'query-name', 'returns': 'NameInfo' }

##
# @VersionInfo:
#
# A description of QEMU's version.
#
# @qemu.major:  The major version of QEMU
#
# @qemu.minor:  The minor version of QEMU
#
# @qemu.micro:  The micro version of QEMU.  By current convention, a micro
#               version of 50 signifies a development branch.  A micro version
#               greater than or equal to 90 signifies a release candidate for
#               the next minor version.  A micro version of less than 50
#               signifies a stable release.
#
# @package:     QEMU will always set this field to an empty string.  Downstream
#               versions of QEMU should set this to a non-empty string.  The
#               exact format depends on the downstream however it highly
#               recommended that a unique name is used.
#
# Since: 0.14.0
##
{ 'type': 'VersionInfo',
  'data': {'qemu': {'major': 'int', 'minor': 'int', 'micro': 'int'},
           'package': 'str'} }

##
# @query-version:
#
# Returns the current version of QEMU.
#
# Returns:  A @VersionInfo object describing the current version of QEMU.
#
# Since: 0.14.0
##
{ 'command': 'query-version', 'returns': 'VersionInfo' }

##
# @KvmInfo:
#
# Information about support for KVM acceleration
#
# @enabled: true if KVM acceleration is active
#
# @present: true if KVM acceleration is built into this executable
#
# Since: 0.14.0
##
{ 'type': 'KvmInfo', 'data': {'enabled': 'bool', 'present': 'bool'} }

##
# @query-kvm:
#
# Returns information about KVM acceleration
#
# Returns: @KvmInfo
#
# Since: 0.14.0
##
{ 'command': 'query-kvm', 'returns': 'KvmInfo' }

##
# @RunState
#
# An enumation of VM run states.
#
# @debug: QEMU is running on a debugger
#
# @finish-migrate: guest is paused to finish the migration process
#
# @inmigrate: guest is paused waiting for an incoming migration
#
# @internal-error: An internal error that prevents further guest execution
# has occurred
#
# @io-error: the last IOP has failed and the device is configured to pause
# on I/O errors
#
# @paused: guest has been paused via the 'stop' command
#
# @postmigrate: guest is paused following a successful 'migrate'
#
# @prelaunch: QEMU was started with -S and guest has not started
#
# @restore-vm: guest is paused to restore VM state
#
# @running: guest is actively running
#
# @save-vm: guest is paused to save the VM state
#
# @shutdown: guest is shut down (and -no-shutdown is in use)
#
# @suspended: guest is suspended (ACPI S3)
#
# @watchdog: the watchdog action is configured to pause and has been triggered
##
{ 'enum': 'RunState',
  'data': [ 'debug', 'inmigrate', 'internal-error', 'io-error', 'paused',
            'postmigrate', 'prelaunch', 'finish-migrate', 'restore-vm',
            'running', 'save-vm', 'shutdown', 'suspended', 'watchdog' ] }

##
# @StatusInfo:
#
# Information about VCPU run state
#
# @running: true if all VCPUs are runnable, false if not runnable
#
# @singlestep: true if VCPUs are in single-step mode
#
# @status: the virtual machine @RunState
#
# Since:  0.14.0
#
# Notes: @singlestep is enabled through the GDB stub
##
{ 'type': 'StatusInfo',
  'data': {'running': 'bool', 'singlestep': 'bool', 'status': 'RunState'} }

##
# @query-status:
#
# Query the run status of all VCPUs
#
# Returns: @StatusInfo reflecting all VCPUs
#
# Since:  0.14.0
##
{ 'command': 'query-status', 'returns': 'StatusInfo' }

##
# @UuidInfo:
#
# Guest UUID information.
#
# @UUID: the UUID of the guest
#
# Since: 0.14.0
#
# Notes: If no UUID was specified for the guest, a null UUID is returned.
##
{ 'type': 'UuidInfo', 'data': {'UUID': 'str'} }

##
# @query-uuid:
#
# Query the guest UUID information.
#
# Returns: The @UuidInfo for the guest
#
# Since 0.14.0
##
{ 'command': 'query-uuid', 'returns': 'UuidInfo' }

##
# @ChardevInfo:
#
# Information about a character device.
#
# @label: the label of the character device
#
# @filename: the filename of the character device
#
# Notes: @filename is encoded using the QEMU command line character device
#        encoding.  See the QEMU man page for details.
#
# Since: 0.14.0
##
{ 'type': 'ChardevInfo', 'data': {'label': 'str', 'filename': 'str'} }

##
# @query-chardev:
#
# Returns information about current character devices.
#
# Returns: a list of @ChardevInfo
#
# Since: 0.14.0
##
{ 'command': 'query-chardev', 'returns': ['ChardevInfo'] }

##
# @CommandInfo:
#
# Information about a QMP command
#
# @name: The command name
#
# Since: 0.14.0
##
{ 'type': 'CommandInfo', 'data': {'name': 'str'} }

##
# @query-commands:
#
# Return a list of supported QMP commands by this server
#
# Returns: A list of @CommandInfo for all supported commands
#
# Since: 0.14.0
##
{ 'command': 'query-commands', 'returns': ['CommandInfo'] }

##
# @EventInfo:
#
# Information about a QMP event
#
# @name: The event name
#
# Since: 1.2.0
##
{ 'type': 'EventInfo', 'data': {'name': 'str'} }

##
# @query-events:
#
# Return a list of supported QMP events by this server
#
# Returns: A list of @EventInfo for all supported events
#
# Since: 1.2.0
##
{ 'command': 'query-events', 'returns': ['EventInfo'] }

##
# @MigrationStats
#
# Detailed migration status.
#
# @transferred: amount of bytes already transferred to the target VM
#
# @remaining: amount of bytes remaining to be transferred to the target VM
#
# @total: total amount of bytes involved in the migration process
#
# @total_time: tota0l amount of ms since migration started.  If
#        migration has ended, it returns the total migration
#        time. (since 1.2)
#
# Since: 0.14.0.
##
{ 'type': 'MigrationStats',
  'data': {'transferred': 'int', 'remaining': 'int', 'total': 'int' ,
           'total_time': 'int' } }

##
# @MigrationInfo
#
# Information about current migration process.
#
# @status: #optional string describing the current migration status.
#          As of 0.14.0 this can be 'active', 'completed', 'failed' or
#          'cancelled'. If this field is not returned, no migration process
#          has been initiated
#
# @ram: #optional @MigrationStats containing detailed migration
#       status, only returned if status is 'active' or
#       'completed'. 'comppleted' (since 1.2)
#
# @disk: #optional @MigrationStats containing detailed disk migration
#        status, only returned if status is 'active' and it is a block
#        migration
#
# Since: 0.14.0
##
{ 'type': 'MigrationInfo',
  'data': {'*status': 'str', '*ram': 'MigrationStats',
           '*disk': 'MigrationStats'} }

##
# @query-migrate
#
# Returns information about current migration process.
#
# Returns: @MigrationInfo
#
# Since: 0.14.0
##
{ 'command': 'query-migrate', 'returns': 'MigrationInfo' }

##
# @MouseInfo:
#
# Information about a mouse device.
#
# @name: the name of the mouse device
#
# @index: the index of the mouse device
#
# @current: true if this device is currently receiving mouse events
#
# @absolute: true if this device supports absolute coordinates as input
#
# Since: 0.14.0
##
{ 'type': 'MouseInfo',
  'data': {'name': 'str', 'index': 'int', 'current': 'bool',
           'absolute': 'bool'} }

##
# @query-mice:
#
# Returns information about each active mouse device
#
# Returns: a list of @MouseInfo for each device
#
# Since: 0.14.0
##
{ 'command': 'query-mice', 'returns': ['MouseInfo'] }

##
# @CpuInfo:
#
# Information about a virtual CPU
#
# @CPU: the index of the virtual CPU
#
# @current: this only exists for backwards compatible and should be ignored
#
# @halted: true if the virtual CPU is in the halt state.  Halt usually refers
#          to a processor specific low power mode.
#
# @pc: #optional If the target is i386 or x86_64, this is the 64-bit instruction
#                pointer.
#                If the target is Sparc, this is the PC component of the
#                instruction pointer.
#
# @nip: #optional If the target is PPC, the instruction pointer
#
# @npc: #optional If the target is Sparc, the NPC component of the instruction
#                 pointer
#
# @PC: #optional If the target is MIPS, the instruction pointer
#
# @thread_id: ID of the underlying host thread
#
# Since: 0.14.0
#
# Notes: @halted is a transient state that changes frequently.  By the time the
#        data is sent to the client, the guest may no longer be halted.
##
{ 'type': 'CpuInfo',
  'data': {'CPU': 'int', 'current': 'bool', 'halted': 'bool', '*pc': 'int',
           '*nip': 'int', '*npc': 'int', '*PC': 'int', 'thread_id': 'int'} }

##
# @query-cpus:
#
# Returns a list of information about each virtual CPU.
#
# Returns: a list of @CpuInfo for each virtual CPU
#
# Since: 0.14.0
##
{ 'command': 'query-cpus', 'returns': ['CpuInfo'] }

##
# @BlockDeviceInfo:
#
# Information about the backing device for a block device.
#
# @file: the filename of the backing device
#
# @ro: true if the backing device was open read-only
#
# @drv: the name of the block format used to open the backing device. As of
#       0.14.0 this can be: 'blkdebug', 'bochs', 'cloop', 'cow', 'dmg',
#       'file', 'file', 'ftp', 'ftps', 'host_cdrom', 'host_device',
#       'host_floppy', 'http', 'https', 'nbd', 'parallels', 'qcow',
#       'qcow2', 'raw', 'tftp', 'vdi', 'vmdk', 'vpc', 'vvfat'
#
# @backing_file: #optional the name of the backing file (for copy-on-write)
#
# @backing_file_depth: number of files in the backing file chain (since: 1.2)
#
# @encrypted: true if the backing device is encrypted
#
# @encryption_key_missing: true if the backing device is encrypted but an
#                          valid encryption key is missing
#
# @bps: total throughput limit in bytes per second is specified
#
# @bps_rd: read throughput limit in bytes per second is specified
#
# @bps_wr: write throughput limit in bytes per second is specified
#
# @iops: total I/O operations per second is specified
#
# @iops_rd: read I/O operations per second is specified
#
# @iops_wr: write I/O operations per second is specified
#
# Since: 0.14.0
#
# Notes: This interface is only found in @BlockInfo.
##
{ 'type': 'BlockDeviceInfo',
  'data': { 'file': 'str', 'ro': 'bool', 'drv': 'str',
            '*backing_file': 'str', 'backing_file_depth': 'int',
            'encrypted': 'bool', 'encryption_key_missing': 'bool',
            'bps': 'int', 'bps_rd': 'int', 'bps_wr': 'int',
            'iops': 'int', 'iops_rd': 'int', 'iops_wr': 'int'} }

##
# @BlockDeviceIoStatus:
#
# An enumeration of block device I/O status.
#
# @ok: The last I/O operation has succeeded
#
# @failed: The last I/O operation has failed
#
# @nospace: The last I/O operation has failed due to a no-space condition
#
# Since: 1.0
##
{ 'enum': 'BlockDeviceIoStatus', 'data': [ 'ok', 'failed', 'nospace' ] }

##
# @BlockInfo:
#
# Block device information.  This structure describes a virtual device and
# the backing device associated with it.
#
# @device: The device name associated with the virtual device.
#
# @type: This field is returned only for compatibility reasons, it should
#        not be used (always returns 'unknown')
#
# @removable: True if the device supports removable media.
#
# @locked: True if the guest has locked this device from having its media
#          removed
#
# @tray_open: #optional True if the device has a tray and it is open
#             (only present if removable is true)
#
# @io-status: #optional @BlockDeviceIoStatus. Only present if the device
#             supports it and the VM is configured to stop on errors
#
# @inserted: #optional @BlockDeviceInfo describing the device if media is
#            present
#
# Since:  0.14.0
##
{ 'type': 'BlockInfo',
  'data': {'device': 'str', 'type': 'str', 'removable': 'bool',
           'locked': 'bool', '*inserted': 'BlockDeviceInfo',
           '*tray_open': 'bool', '*io-status': 'BlockDeviceIoStatus'} }

##
# @query-block:
#
# Get a list of BlockInfo for all virtual block devices.
#
# Returns: a list of @BlockInfo describing each virtual block device
#
# Since: 0.14.0
##
{ 'command': 'query-block', 'returns': ['BlockInfo'] }

##
# @BlockDeviceStats:
#
# Statistics of a virtual block device or a block backing device.
#
# @rd_bytes:      The number of bytes read by the device.
#
# @wr_bytes:      The number of bytes written by the device.
#
# @rd_operations: The number of read operations performed by the device.
#
# @wr_operations: The number of write operations performed by the device.
#
# @flush_operations: The number of cache flush operations performed by the
#                    device (since 0.15.0)
#
# @flush_total_time_ns: Total time spend on cache flushes in nano-seconds
#                       (since 0.15.0).
#
# @wr_total_time_ns: Total time spend on writes in nano-seconds (since 0.15.0).
#
# @rd_total_time_ns: Total_time_spend on reads in nano-seconds (since 0.15.0).
#
# @wr_highest_offset: The offset after the greatest byte written to the
#                     device.  The intended use of this information is for
#                     growable sparse files (like qcow2) that are used on top
#                     of a physical device.
#
# Since: 0.14.0
##
{ 'type': 'BlockDeviceStats',
  'data': {'rd_bytes': 'int', 'wr_bytes': 'int', 'rd_operations': 'int',
           'wr_operations': 'int', 'flush_operations': 'int',
           'flush_total_time_ns': 'int', 'wr_total_time_ns': 'int',
           'rd_total_time_ns': 'int', 'wr_highest_offset': 'int' } }

##
# @BlockStats:
#
# Statistics of a virtual block device or a block backing device.
#
# @device: #optional If the stats are for a virtual block device, the name
#          corresponding to the virtual block device.
#
# @stats:  A @BlockDeviceStats for the device.
#
# @parent: #optional This may point to the backing block device if this is a
#          a virtual block device.  If it's a backing block, this will point
#          to the backing file is one is present.
#
# Since: 0.14.0
##
{ 'type': 'BlockStats',
  'data': {'*device': 'str', 'stats': 'BlockDeviceStats',
           '*parent': 'BlockStats'} }

##
# @query-blockstats:
#
# Query the @BlockStats for all virtual block devices.
#
# Returns: A list of @BlockStats for each virtual block devices.
#
# Since: 0.14.0
##
{ 'command': 'query-blockstats', 'returns': ['BlockStats'] }

##
# @VncClientInfo:
#
# Information about a connected VNC client.
#
# @host: The host name of the client.  QEMU tries to resolve this to a DNS name
#        when possible.
#
# @family: 'ipv6' if the client is connected via IPv6 and TCP
#          'ipv4' if the client is connected via IPv4 and TCP
#          'unix' if the client is connected via a unix domain socket
#          'unknown' otherwise
#
# @service: The service name of the client's port.  This may depends on the
#           host system's service database so symbolic names should not be
#           relied on.
#
# @x509_dname: #optional If x509 authentication is in use, the Distinguished
#              Name of the client.
#
# @sasl_username: #optional If SASL authentication is in use, the SASL username
#                 used for authentication.
#
# Since: 0.14.0
##
{ 'type': 'VncClientInfo',
  'data': {'host': 'str', 'family': 'str', 'service': 'str',
           '*x509_dname': 'str', '*sasl_username': 'str'} }

##
# @VncInfo:
#
# Information about the VNC session.
#
# @enabled: true if the VNC server is enabled, false otherwise
#
# @host: #optional The hostname the VNC server is bound to.  This depends on
#        the name resolution on the host and may be an IP address.
#
# @family: #optional 'ipv6' if the host is listening for IPv6 connections
#                    'ipv4' if the host is listening for IPv4 connections
#                    'unix' if the host is listening on a unix domain socket
#                    'unknown' otherwise
#
# @service: #optional The service name of the server's port.  This may depends
#           on the host system's service database so symbolic names should not
#           be relied on.
#
# @auth: #optional the current authentication type used by the server
#        'none' if no authentication is being used
#        'vnc' if VNC authentication is being used
#        'vencrypt+plain' if VEncrypt is used with plain text authentication
#        'vencrypt+tls+none' if VEncrypt is used with TLS and no authentication
#        'vencrypt+tls+vnc' if VEncrypt is used with TLS and VNC authentication
#        'vencrypt+tls+plain' if VEncrypt is used with TLS and plain text auth
#        'vencrypt+x509+none' if VEncrypt is used with x509 and no auth
#        'vencrypt+x509+vnc' if VEncrypt is used with x509 and VNC auth
#        'vencrypt+x509+plain' if VEncrypt is used with x509 and plain text auth
#        'vencrypt+tls+sasl' if VEncrypt is used with TLS and SASL auth
#        'vencrypt+x509+sasl' if VEncrypt is used with x509 and SASL auth
#
# @clients: a list of @VncClientInfo of all currently connected clients
#
# Since: 0.14.0
##
{ 'type': 'VncInfo',
  'data': {'enabled': 'bool', '*host': 'str', '*family': 'str',
           '*service': 'str', '*auth': 'str', '*clients': ['VncClientInfo']} }

##
# @query-vnc:
#
# Returns information about the current VNC server
#
# Returns: @VncInfo
#
# Since: 0.14.0
##
{ 'command': 'query-vnc', 'returns': 'VncInfo' }

##
# @SpiceChannel
#
# Information about a SPICE client channel.
#
# @host: The host name of the client.  QEMU tries to resolve this to a DNS name
#        when possible.
#
# @family: 'ipv6' if the client is connected via IPv6 and TCP
#          'ipv4' if the client is connected via IPv4 and TCP
#          'unix' if the client is connected via a unix domain socket
#          'unknown' otherwise
#
# @port: The client's port number.
#
# @connection-id: SPICE connection id number.  All channels with the same id
#                 belong to the same SPICE session.
#
# @connection-type: SPICE channel type number.  "1" is the main control
#                   channel, filter for this one if you want to track spice
#                   sessions only
#
# @channel-id: SPICE channel ID number.  Usually "0", might be different when
#              multiple channels of the same type exist, such as multiple
#              display channels in a multihead setup
#
# @tls: true if the channel is encrypted, false otherwise.
#
# Since: 0.14.0
##
{ 'type': 'SpiceChannel',
  'data': {'host': 'str', 'family': 'str', 'port': 'str',
           'connection-id': 'int', 'channel-type': 'int', 'channel-id': 'int',
           'tls': 'bool'} }

##
# @SpiceQueryMouseMode
#
# An enumation of Spice mouse states.
#
# @client: Mouse cursor position is determined by the client.
#
# @server: Mouse cursor position is determined by the server.
#
# @unknown: No information is available about mouse mode used by
#           the spice server.
#
# Note: spice/enums.h has a SpiceMouseMode already, hence the name.
#
# Since: 1.1
##
{ 'enum': 'SpiceQueryMouseMode',
  'data': [ 'client', 'server', 'unknown' ] }

##
# @SpiceInfo
#
# Information about the SPICE session.
#
# @enabled: true if the SPICE server is enabled, false otherwise
#
# @host: #optional The hostname the SPICE server is bound to.  This depends on
#        the name resolution on the host and may be an IP address.
#
# @port: #optional The SPICE server's port number.
#
# @compiled-version: #optional SPICE server version.
#
# @tls-port: #optional The SPICE server's TLS port number.
#
# @auth: #optional the current authentication type used by the server
#        'none'  if no authentication is being used
#        'spice' uses SASL or direct TLS authentication, depending on command
#                line options
#
# @mouse-mode: The mode in which the mouse cursor is displayed currently. Can
#              be determined by the client or the server, or unknown if spice
#              server doesn't provide this information.
#
#              Since: 1.1
#
# @channels: a list of @SpiceChannel for each active spice channel
#
# Since: 0.14.0
##
{ 'type': 'SpiceInfo',
  'data': {'enabled': 'bool', '*host': 'str', '*port': 'int',
           '*tls-port': 'int', '*auth': 'str', '*compiled-version': 'str',
           'mouse-mode': 'SpiceQueryMouseMode', '*channels': ['SpiceChannel']} }

##
# @query-spice
#
# Returns information about the current SPICE server
#
# Returns: @SpiceInfo
#
# Since: 0.14.0
##
{ 'command': 'query-spice', 'returns': 'SpiceInfo' }

##
# @BalloonInfo:
#
# Information about the guest balloon device.
#
# @actual: the number of bytes the balloon currently contains
#
# @mem_swapped_in: #optional number of pages swapped in within the guest
#
# @mem_swapped_out: #optional number of pages swapped out within the guest
#
# @major_page_faults: #optional number of major page faults within the guest
#
# @minor_page_faults: #optional number of minor page faults within the guest
#
# @free_mem: #optional amount of memory (in bytes) free in the guest
#
# @total_mem: #optional amount of memory (in bytes) visible to the guest
#
# Since: 0.14.0
#
# Notes: all current versions of QEMU do not fill out optional information in
#        this structure.
##
{ 'type': 'BalloonInfo',
  'data': {'actual': 'int', '*mem_swapped_in': 'int',
           '*mem_swapped_out': 'int', '*major_page_faults': 'int',
           '*minor_page_faults': 'int', '*free_mem': 'int',
           '*total_mem': 'int'} }

##
# @query-balloon:
#
# Return information about the balloon device.
#
# Returns: @BalloonInfo on success
#          If the balloon driver is enabled but not functional because the KVM
#          kernel module cannot support it, KvmMissingCap
#          If no balloon device is present, DeviceNotActive
#
# Since: 0.14.0
##
{ 'command': 'query-balloon', 'returns': 'BalloonInfo' }

##
# @PciMemoryRange:
#
# A PCI device memory region
#
# @base: the starting address (guest physical)
#
# @limit: the ending address (guest physical)
#
# Since: 0.14.0
##
{ 'type': 'PciMemoryRange', 'data': {'base': 'int', 'limit': 'int'} }

##
# @PciMemoryRegion
#
# Information about a PCI device I/O region.
#
# @bar: the index of the Base Address Register for this region
#
# @type: 'io' if the region is a PIO region
#        'memory' if the region is a MMIO region
#
# @prefetch: #optional if @type is 'memory', true if the memory is prefetchable
#
# @mem_type_64: #optional if @type is 'memory', true if the BAR is 64-bit
#
# Since: 0.14.0
##
{ 'type': 'PciMemoryRegion',
  'data': {'bar': 'int', 'type': 'str', 'address': 'int', 'size': 'int',
           '*prefetch': 'bool', '*mem_type_64': 'bool' } }

##
# @PciBridgeInfo:
#
# Information about a PCI Bridge device
#
# @bus.number: primary bus interface number.  This should be the number of the
#              bus the device resides on.
#
# @bus.secondary: secondary bus interface number.  This is the number of the
#                 main bus for the bridge
#
# @bus.subordinate: This is the highest number bus that resides below the
#                   bridge.
#
# @bus.io_range: The PIO range for all devices on this bridge
#
# @bus.memory_range: The MMIO range for all devices on this bridge
#
# @bus.prefetchable_range: The range of prefetchable MMIO for all devices on
#                          this bridge
#
# @devices: a list of @PciDeviceInfo for each device on this bridge
#
# Since: 0.14.0
##
{ 'type': 'PciBridgeInfo',
  'data': {'bus': { 'number': 'int', 'secondary': 'int', 'subordinate': 'int',
                    'io_range': 'PciMemoryRange',
                    'memory_range': 'PciMemoryRange',
                    'prefetchable_range': 'PciMemoryRange' },
           '*devices': ['PciDeviceInfo']} }

##
# @PciDeviceInfo:
#
# Information about a PCI device
#
# @bus: the bus number of the device
#
# @slot: the slot the device is located in
#
# @function: the function of the slot used by the device
#
# @class_info.desc: #optional a string description of the device's class
#
# @class_info.class: the class code of the device
#
# @id.device: the PCI device id
#
# @id.vendor: the PCI vendor id
#
# @irq: #optional if an IRQ is assigned to the device, the IRQ number
#
# @qdev_id: the device name of the PCI device
#
# @pci_bridge: if the device is a PCI bridge, the bridge information
#
# @regions: a list of the PCI I/O regions associated with the device
#
# Notes: the contents of @class_info.desc are not stable and should only be
#        treated as informational.
#
# Since: 0.14.0
##
{ 'type': 'PciDeviceInfo',
  'data': {'bus': 'int', 'slot': 'int', 'function': 'int',
           'class_info': {'*desc': 'str', 'class': 'int'},
           'id': {'device': 'int', 'vendor': 'int'},
           '*irq': 'int', 'qdev_id': 'str', '*pci_bridge': 'PciBridgeInfo',
           'regions': ['PciMemoryRegion']} }

##
# @PciInfo:
#
# Information about a PCI bus
#
# @bus: the bus index
#
# @devices: a list of devices on this bus
#
# Since: 0.14.0
##
{ 'type': 'PciInfo', 'data': {'bus': 'int', 'devices': ['PciDeviceInfo']} }

##
# @query-pci:
#
# Return information about the PCI bus topology of the guest.
#
# Returns: a list of @PciInfo for each PCI bus
#
# Since: 0.14.0
##
{ 'command': 'query-pci', 'returns': ['PciInfo'] }

##
# @BlockJobInfo:
#
# Information about a long-running block device operation.
#
# @type: the job type ('stream' for image streaming)
#
# @device: the block device name
#
# @len: the maximum progress value
#
# @offset: the current progress value
#
# @speed: the rate limit, bytes per second
#
# Since: 1.1
##
{ 'type': 'BlockJobInfo',
  'data': {'type': 'str', 'device': 'str', 'len': 'int',
           'offset': 'int', 'speed': 'int'} }

##
# @query-block-jobs:
#
# Return information about long-running block device operations.
#
# Returns: a list of @BlockJobInfo for each active block job
#
# Since: 1.1
##
{ 'command': 'query-block-jobs', 'returns': ['BlockJobInfo'] }

##
# @quit:
#
# This command will cause the QEMU process to exit gracefully.  While every
# attempt is made to send the QMP response before terminating, this is not
# guaranteed.  When using this interface, a premature EOF would not be
# unexpected.
#
# Since: 0.14.0
##
{ 'command': 'quit' }

##
# @stop:
#
# Stop all guest VCPU execution.
#
# Since:  0.14.0
#
# Notes:  This function will succeed even if the guest is already in the stopped
#         state
##
{ 'command': 'stop' }

##
# @system_reset:
#
# Performs a hard reset of a guest.
#
# Since: 0.14.0
##
{ 'command': 'system_reset' }

##
# @system_powerdown:
#
# Requests that a guest perform a powerdown operation.
#
# Since: 0.14.0
#
# Notes: A guest may or may not respond to this command.  This command
#        returning does not indicate that a guest has accepted the request or
#        that it has shut down.  Many guests will respond to this command by
#        prompting the user in some way.
##
{ 'command': 'system_powerdown' }

##
# @cpu:
#
# This command is a nop that is only provided for the purposes of compatibility.
#
# Since: 0.14.0
#
# Notes: Do not use this command.
##
{ 'command': 'cpu', 'data': {'index': 'int'} }

##
# @memsave:
#
# Save a portion of guest memory to a file.
#
# @val: the virtual address of the guest to start from
#
# @size: the size of memory region to save
#
# @filename: the file to save the memory to as binary data
#
# @cpu-index: #optional the index of the virtual CPU to use for translating the
#                       virtual address (defaults to CPU 0)
#
# Returns: Nothing on success
#
# Since: 0.14.0
#
# Notes: Errors were not reliably returned until 1.1
##
{ 'command': 'memsave',
  'data': {'val': 'int', 'size': 'int', 'filename': 'str', '*cpu-index': 'int'} }

##
# @pmemsave:
#
# Save a portion of guest physical memory to a file.
#
# @val: the physical address of the guest to start from
#
# @size: the size of memory region to save
#
# @filename: the file to save the memory to as binary data
#
# Returns: Nothing on success
#
# Since: 0.14.0
#
# Notes: Errors were not reliably returned until 1.1
##
{ 'command': 'pmemsave',
  'data': {'val': 'int', 'size': 'int', 'filename': 'str'} }

##
# @cont:
#
# Resume guest VCPU execution.
#
# Since:  0.14.0
#
# Returns:  If successful, nothing
#           If the QEMU is waiting for an incoming migration, MigrationExpected
#           If QEMU was started with an encrypted block device and a key has
#              not yet been set, DeviceEncrypted.
#
# Notes:  This command will succeed if the guest is currently running.
##
{ 'command': 'cont' }

##
# @system_wakeup:
#
# Wakeup guest from suspend.  Does nothing in case the guest isn't suspended.
#
# Since:  1.1
#
# Returns:  nothing.
##
{ 'command': 'system_wakeup' }

##
# @inject-nmi:
#
# Injects an Non-Maskable Interrupt into all guest's VCPUs.
#
# Returns:  If successful, nothing
#
# Since:  0.14.0
#
# Notes: Only x86 Virtual Machines support this command.
##
{ 'command': 'inject-nmi' }

##
# @set_link:
#
# Sets the link status of a virtual network adapter.
#
# @name: the device name of the virtual network adapter
#
# @up: true to set the link status to be up
#
# Returns: Nothing on success
#          If @name is not a valid network device, DeviceNotFound
#
# Since: 0.14.0
#
# Notes: Not all network adapters support setting link status.  This command
#        will succeed even if the network adapter does not support link status
#        notification.
##
{ 'command': 'set_link', 'data': {'name': 'str', 'up': 'bool'} }

##
# @block_passwd:
#
# This command sets the password of a block device that has not been open
# with a password and requires one.
#
# The two cases where this can happen are a block device is created through
# QEMU's initial command line or a block device is changed through the legacy
# @change interface.
#
# In the event that the block device is created through the initial command
# line, the VM will start in the stopped state regardless of whether '-S' is
# used.  The intention is for a management tool to query the block devices to
# determine which ones are encrypted, set the passwords with this command, and
# then start the guest with the @cont command.
#
# @device:   the name of the device to set the password on
#
# @password: the password to use for the device
#
# Returns: nothing on success
#          If @device is not a valid block device, DeviceNotFound
#          If @device is not encrypted, DeviceNotEncrypted
#
# Notes:  Not all block formats support encryption and some that do are not
#         able to validate that a password is correct.  Disk corruption may
#         occur if an invalid password is specified.
#
# Since: 0.14.0
##
{ 'command': 'block_passwd', 'data': {'device': 'str', 'password': 'str'} }

##
# @balloon:
#
# Request the balloon driver to change its balloon size.
#
# @value: the target size of the balloon in bytes
#
# Returns: Nothing on success
#          If the balloon driver is enabled but not functional because the KVM
#            kernel module cannot support it, KvmMissingCap
#          If no balloon device is present, DeviceNotActive
#
# Notes: This command just issues a request to the guest.  When it returns,
#        the balloon size may not have changed.  A guest can change the balloon
#        size independent of this command.
#
# Since: 0.14.0
##
{ 'command': 'balloon', 'data': {'value': 'int'} }

##
# @block_resize
#
# Resize a block image while a guest is running.
#
# @device:  the name of the device to get the image resized
#
# @size:  new image size in bytes
#
# Returns: nothing on success
#          If @device is not a valid block device, DeviceNotFound
#
# Since: 0.14.0
##
{ 'command': 'block_resize', 'data': { 'device': 'str', 'size': 'int' }}

##
# @NewImageMode
#
# An enumeration that tells QEMU how to set the backing file path in
# a new image file.
#
# @existing: QEMU should look for an existing image file.
#
# @absolute-paths: QEMU should create a new image with absolute paths
# for the backing file.
#
# Since: 1.1
##
{ 'enum': 'NewImageMode'
  'data': [ 'existing', 'absolute-paths' ] }

##
# @BlockdevSnapshot
#
# @device:  the name of the device to generate the snapshot from.
#
# @snapshot-file: the target of the new image. A new file will be created.
#
# @format: #optional the format of the snapshot image, default is 'qcow2'.
#
# @mode: #optional whether and how QEMU should create a new image, default is
# 'absolute-paths'.
##
{ 'type': 'BlockdevSnapshot',
  'data': { 'device': 'str', 'snapshot-file': 'str', '*format': 'str',
            '*mode': 'NewImageMode' } }

##
# @BlockdevAction
#
# A discriminated record of operations that can be performed with
# @transaction.
##
{ 'union': 'BlockdevAction',
  'data': {
       'blockdev-snapshot-sync': 'BlockdevSnapshot',
   } }

##
# @transaction
#
# Atomically operate on a group of one or more block devices.  If
# any operation fails, then the entire set of actions will be
# abandoned and the appropriate error returned.  The only operation
# supported is currently blockdev-snapshot-sync.
#
#  List of:
#  @BlockdevAction: information needed for the device snapshot
#
# Returns: nothing on success
#          If @device is not a valid block device, DeviceNotFound
#
# Note: The transaction aborts on the first failure.  Therefore, there will
# be only one device or snapshot file returned in an error condition, and
# subsequent actions will not have been attempted.
#
# Since 1.1
##
{ 'command': 'transaction',
  'data': { 'actions': [ 'BlockdevAction' ] } }

##
# @blockdev-snapshot-sync
#
# Generates a synchronous snapshot of a block device.
#
# @device:  the name of the device to generate the snapshot from.
#
# @snapshot-file: the target of the new image. If the file exists, or if it
#                 is a device, the snapshot will be created in the existing
#                 file/device. If does not exist, a new file will be created.
#
# @format: #optional the format of the snapshot image, default is 'qcow2'.
#
# @mode: #optional whether and how QEMU should create a new image, default is
# 'absolute-paths'.
#
# Returns: nothing on success
#          If @device is not a valid block device, DeviceNotFound
#
# Since 0.14.0
##
{ 'command': 'blockdev-snapshot-sync',
  'data': { 'device': 'str', 'snapshot-file': 'str', '*format': 'str',
            '*mode': 'NewImageMode'} }

##
# @human-monitor-command:
#
# Execute a command on the human monitor and return the output.
#
# @command-line: the command to execute in the human monitor
#
# @cpu-index: #optional The CPU to use for commands that require an implicit CPU
#
# Returns: the output of the command as a string
#
# Since: 0.14.0
#
# Notes: This command only exists as a stop-gap.  It's use is highly
#        discouraged.  The semantics of this command are not guaranteed.
#
#        Known limitations:
#
#        o This command is stateless, this means that commands that depend
#          on state information (such as getfd) might not work
#
#       o Commands that prompt the user for data (eg. 'cont' when the block
#         device is encrypted) don't currently work
##
{ 'command': 'human-monitor-command',
  'data': {'command-line': 'str', '*cpu-index': 'int'},
  'returns': 'str' }

##
# @migrate_cancel
#
# Cancel the current executing migration process.
#
# Returns: nothing on success
#
# Notes: This command succeeds even if there is no migration process running.
#
# Since: 0.14.0
##
{ 'command': 'migrate_cancel' }

##
# @migrate_set_downtime
#
# Set maximum tolerated downtime for migration.
#
# @value: maximum downtime in seconds
#
# Returns: nothing on success
#
# Since: 0.14.0
##
{ 'command': 'migrate_set_downtime', 'data': {'value': 'number'} }

##
# @migrate_set_speed
#
# Set maximum speed for migration.
#
# @value: maximum speed in bytes.
#
# Returns: nothing on success
#
# Notes: A value lesser than zero will be automatically round up to zero.
#
# Since: 0.14.0
##
{ 'command': 'migrate_set_speed', 'data': {'value': 'int'} }

##
# @ObjectPropertyInfo:
#
# @name: the name of the property
#
# @type: the type of the property.  This will typically come in one of four
#        forms:
#
#        1) A primitive type such as 'u8', 'u16', 'bool', 'str', or 'double'.
#           These types are mapped to the appropriate JSON type.
#
#        2) A legacy type in the form 'legacy<subtype>' where subtype is the
#           legacy qdev typename.  These types are always treated as strings.
#
#        3) A child type in the form 'child<subtype>' where subtype is a qdev
#           device type name.  Child properties create the composition tree.
#
#        4) A link type in the form 'link<subtype>' where subtype is a qdev
#           device type name.  Link properties form the device model graph.
#
# Since: 1.2
##
{ 'type': 'ObjectPropertyInfo',
  'data': { 'name': 'str', 'type': 'str' } }

##
# @qom-list:
#
# This command will list any properties of a object given a path in the object
# model.
#
# @path: the path within the object model.  See @qom-get for a description of
#        this parameter.
#
# Returns: a list of @ObjectPropertyInfo that describe the properties of the
#          object.
#
# Since: 1.2
##
{ 'command': 'qom-list',
  'data': { 'path': 'str' },
  'returns': [ 'ObjectPropertyInfo' ] }

##
# @qom-get:
#
# This command will get a property from a object model path and return the
# value.
#
# @path: The path within the object model.  There are two forms of supported
#        paths--absolute and partial paths.
#
#        Absolute paths are derived from the root object and can follow child<>
#        or link<> properties.  Since they can follow link<> properties, they
#        can be arbitrarily long.  Absolute paths look like absolute filenames
#        and are prefixed  with a leading slash.
#
#        Partial paths look like relative filenames.  They do not begin
#        with a prefix.  The matching rules for partial paths are subtle but
#        designed to make specifying objects easy.  At each level of the
#        composition tree, the partial path is matched as an absolute path.
#        The first match is not returned.  At least two matches are searched
#        for.  A successful result is only returned if only one match is
#        found.  If more than one match is found, a flag is return to
#        indicate that the match was ambiguous.
#
# @property: The property name to read
#
# Returns: The property value.  The type depends on the property type.  legacy<>
#          properties are returned as #str.  child<> and link<> properties are
#          returns as #str pathnames.  All integer property types (u8, u16, etc)
#          are returned as #int.
#
# Since: 1.2
##
{ 'command': 'qom-get',
  'data': { 'path': 'str', 'property': 'str' },
  'returns': 'visitor',
  'gen': 'no' }

##
# @qom-set:
#
# This command will set a property from a object model path.
#
# @path: see @qom-get for a description of this parameter
#
# @property: the property name to set
#
# @value: a value who's type is appropriate for the property type.  See @qom-get
#         for a description of type mapping.
#
# Since: 1.2
##
{ 'command': 'qom-set',
  'data': { 'path': 'str', 'property': 'str', 'value': 'visitor' },
  'gen': 'no' }

##
# @set_password:
#
# Sets the password of a remote display session.
#
# @protocol: `vnc' to modify the VNC server password
#            `spice' to modify the Spice server password
#
# @password: the new password
#
# @connected: #optional how to handle existing clients when changing the
#                       password.  If nothing is specified, defaults to `keep'
#                       `fail' to fail the command if clients are connected
#                       `disconnect' to disconnect existing clients
#                       `keep' to maintain existing clients
#
# Returns: Nothing on success
#          If Spice is not enabled, DeviceNotFound
#
# Since: 0.14.0
##
{ 'command': 'set_password',
  'data': {'protocol': 'str', 'password': 'str', '*connected': 'str'} }

##
# @expire_password:
#
# Expire the password of a remote display server.
#
# @protocol: the name of the remote display protocol `vnc' or `spice'
#
# @time: when to expire the password.
#        `now' to expire the password immediately
#        `never' to cancel password expiration
#        `+INT' where INT is the number of seconds from now (integer)
#        `INT' where INT is the absolute time in seconds
#
# Returns: Nothing on success
#          If @protocol is `spice' and Spice is not active, DeviceNotFound
#
# Since: 0.14.0
#
# Notes: Time is relative to the server and currently there is no way to
#        coordinate server time with client time.  It is not recommended to
#        use the absolute time version of the @time parameter unless you're
#        sure you are on the same machine as the QEMU instance.
##
{ 'command': 'expire_password', 'data': {'protocol': 'str', 'time': 'str'} }

##
# @eject:
#
# Ejects a device from a removable drive.
#
# @device:  The name of the device
#
# @force:   @optional If true, eject regardless of whether the drive is locked.
#           If not specified, the default value is false.
#
# Returns:  Nothing on success
#           If @device is not a valid block device, DeviceNotFound
#
# Notes:    Ejecting a device will no media results in success
#
# Since: 0.14.0
##
{ 'command': 'eject', 'data': {'device': 'str', '*force': 'bool'} }

##
# @change-vnc-password:
#
# Change the VNC server password.
#
# @target:  the new password to use with VNC authentication
#
# Since: 1.1
#
# Notes:  An empty password in this command will set the password to the empty
#         string.  Existing clients are unaffected by executing this command.
##
{ 'command': 'change-vnc-password', 'data': {'password': 'str'} }

##
# @change:
#
# This command is multiple commands multiplexed together.
#
# @device: This is normally the name of a block device but it may also be 'vnc'.
#          when it's 'vnc', then sub command depends on @target
#
# @target: If @device is a block device, then this is the new filename.
#          If @device is 'vnc', then if the value 'password' selects the vnc
#          change password command.   Otherwise, this specifies a new server URI
#          address to listen to for VNC connections.
#
# @arg:    If @device is a block device, then this is an optional format to open
#          the device with.
#          If @device is 'vnc' and @target is 'password', this is the new VNC
#          password to set.  If this argument is an empty string, then no future
#          logins will be allowed.
#
# Returns: Nothing on success.
#          If @device is not a valid block device, DeviceNotFound
#          If the new block device is encrypted, DeviceEncrypted.  Note that
#          if this error is returned, the device has been opened successfully
#          and an additional call to @block_passwd is required to set the
#          device's password.  The behavior of reads and writes to the block
#          device between when these calls are executed is undefined.
#
# Notes:  It is strongly recommended that this interface is not used especially
#         for changing block devices.
#
# Since: 0.14.0
##
{ 'command': 'change',
  'data': {'device': 'str', 'target': 'str', '*arg': 'str'} }

##
# @block_set_io_throttle:
#
# Change I/O throttle limits for a block drive.
#
# @device: The name of the device
#
# @bps: total throughput limit in bytes per second
#
# @bps_rd: read throughput limit in bytes per second
#
# @bps_wr: write throughput limit in bytes per second
#
# @iops: total I/O operations per second
#
# @ops_rd: read I/O operations per second
#
# @iops_wr: write I/O operations per second
#
# Returns: Nothing on success
#          If @device is not a valid block device, DeviceNotFound
#
# Since: 1.1
##
{ 'command': 'block_set_io_throttle',
  'data': { 'device': 'str', 'bps': 'int', 'bps_rd': 'int', 'bps_wr': 'int',
            'iops': 'int', 'iops_rd': 'int', 'iops_wr': 'int' } }

##
# @block-stream:
#
# Copy data from a backing file into a block device.
#
# The block streaming operation is performed in the background until the entire
# backing file has been copied.  This command returns immediately once streaming
# has started.  The status of ongoing block streaming operations can be checked
# with query-block-jobs.  The operation can be stopped before it has completed
# using the block-job-cancel command.
#
# If a base file is specified then sectors are not copied from that base file and
# its backing chain.  When streaming completes the image file will have the base
# file as its backing file.  This can be used to stream a subset of the backing
# file chain instead of flattening the entire image.
#
# On successful completion the image file is updated to drop the backing file
# and the BLOCK_JOB_COMPLETED event is emitted.
#
# @device: the device name
#
# @base:   #optional the common backing file name
#
# @speed:  #optional the maximum speed, in bytes per second
#
# Returns: Nothing on success
#          If @device does not exist, DeviceNotFound
#
# Since: 1.1
##
{ 'command': 'block-stream', 'data': { 'device': 'str', '*base': 'str',
                                       '*speed': 'int' } }

##
# @block-job-set-speed:
#
# Set maximum speed for a background block operation.
#
# This command can only be issued when there is an active block job.
#
# Throttling can be disabled by setting the speed to 0.
#
# @device: the device name
#
# @speed:  the maximum speed, in bytes per second, or 0 for unlimited.
#          Defaults to 0.
#
# Returns: Nothing on success
#          If no background operation is active on this device, DeviceNotActive
#
# Since: 1.1
##
{ 'command': 'block-job-set-speed',
  'data': { 'device': 'str', 'speed': 'int' } }

##
# @block-job-cancel:
#
# Stop an active background block operation.
#
# This command returns immediately after marking the active background block
# operation for cancellation.  It is an error to call this command if no
# operation is in progress.
#
# The operation will cancel as soon as possible and then emit the
# BLOCK_JOB_CANCELLED event.  Before that happens the job is still visible when
# enumerated using query-block-jobs.
#
# For streaming, the image file retains its backing file unless the streaming
# operation happens to complete just as it is being cancelled.  A new streaming
# operation can be started at a later time to finish copying all data from the
# backing file.
#
# @device: the device name
#
# Returns: Nothing on success
#          If no background operation is active on this device, DeviceNotActive
#
# Since: 1.1
##
{ 'command': 'block-job-cancel', 'data': { 'device': 'str' } }

##
# @ObjectTypeInfo:
#
# This structure describes a search result from @qom-list-types
#
# @name: the type name found in the search
#
# Since: 1.1
#
# Notes: This command is experimental and may change syntax in future releases.
##
{ 'type': 'ObjectTypeInfo',
  'data': { 'name': 'str' } }

##
# @qom-list-types:
#
# This command will return a list of types given search parameters
#
# @implements: if specified, only return types that implement this type name
#
# @abstract: if true, include abstract types in the results
#
# Returns: a list of @ObjectTypeInfo or an empty list if no results are found
#
# Since: 1.1
##
{ 'command': 'qom-list-types',
  'data': { '*implements': 'str', '*abstract': 'bool' },
  'returns': [ 'ObjectTypeInfo' ] }

##
# @DevicePropertyInfo:
#
# Information about device properties.
#
# @name: the name of the property
# @type: the typename of the property
#
# Since: 1.2
##
{ 'type': 'DevicePropertyInfo',
  'data': { 'name': 'str', 'type': 'str' } }

##
# @device-list-properties:
#
# List properties associated with a device.
#
# @typename: the type name of a device
#
# Returns: a list of DevicePropertyInfo describing a devices properties
#
# Since: 1.2
##
{ 'command': 'device-list-properties',
  'data': { 'typename': 'str'},
  'returns': [ 'DevicePropertyInfo' ] }

##
# @migrate
#
# Migrates the current running guest to another Virtual Machine.
#
# @uri: the Uniform Resource Identifier of the destination VM
#
# @blk: #optional do block migration (full disk copy)
#
# @inc: #optional incremental disk copy migration
#
# @detach: this argument exists only for compatibility reasons and
#          is ignored by QEMU
#
# Returns: nothing on success
#
# Since: 0.14.0
##
{ 'command': 'migrate',
  'data': {'uri': 'str', '*blk': 'bool', '*inc': 'bool', '*detach': 'bool' } }

# @xen-save-devices-state:
#
# Save the state of all devices to file. The RAM and the block devices
# of the VM are not saved by this command.
#
# @filename: the file to save the state of the devices to as binary
# data. See xen-save-devices-state.txt for a description of the binary
# format.
#
# Returns: Nothing on success
#
# Since: 1.1
##
{ 'command': 'xen-save-devices-state', 'data': {'filename': 'str'} }

##
# @device_del:
#
# Remove a device from a guest
#
# @id: the name of the device
#
# Returns: Nothing on success
#          If @id is not a valid device, DeviceNotFound
#
# Notes: When this command completes, the device may not be removed from the
#        guest.  Hot removal is an operation that requires guest cooperation.
#        This command merely requests that the guest begin the hot removal
#        process.
#
# Since: 0.14.0
##
{ 'command': 'device_del', 'data': {'id': 'str'} }

##
# @dump-guest-memory
#
# Dump guest's memory to vmcore. It is a synchronous operation that can take
# very long depending on the amount of guest memory. This command is only
# supported on i386 and x86_64.
#
# @paging: if true, do paging to get guest's memory mapping. This allows
# using gdb to process the core file. However, setting @paging to false
# may be desirable because of two reasons:
#
#   1. The guest may be in a catastrophic state or can have corrupted
#      memory, which cannot be trusted
#   2. The guest can be in real-mode even if paging is enabled. For example,
#      the guest uses ACPI to sleep, and ACPI sleep state goes in real-mode
#
# @protocol: the filename or file descriptor of the vmcore. The supported
# protocols are:
#
#   1. file: the protocol starts with "file:", and the following string is
#      the file's path.
#   2. fd: the protocol starts with "fd:", and the following string is the
#      fd's name.
#
# @begin: #optional if specified, the starting physical address.
#
# @length: #optional if specified, the memory size, in bytes. If you don't
# want to dump all guest's memory, please specify the start @begin and @length
#
# Returns: nothing on success
#
# Since: 1.2
##
{ 'command': 'dump-guest-memory',
  'data': { 'paging': 'bool', 'protocol': 'str', '*begin': 'int',
            '*length': 'int' } }
##
# @netdev_add:
#
# Add a network backend.
#
# @type: the type of network backend.  Current valid values are 'user', 'tap',
#        'vde', 'socket', 'dump' and 'bridge'
#
# @id: the name of the new network backend
#
# @props: #optional a list of properties to be passed to the backend in
#         the format 'name=value', like 'ifname=tap0,script=no'
#
# Notes: The semantics of @props is not well defined.  Future commands will be
#        introduced that provide stronger typing for backend creation.
#
# Since: 0.14.0
#
# Returns: Nothing on success
#          If @type is not a valid network backend, DeviceNotFound
##
{ 'command': 'netdev_add',
  'data': {'type': 'str', 'id': 'str', '*props': '**'},
  'gen': 'no' }

##
# @netdev_del:
#
# Remove a network backend.
#
# @id: the name of the network backend to remove
#
# Returns: Nothing on success
#          If @id is not a valid network backend, DeviceNotFound
#
# Since: 0.14.0
##
{ 'command': 'netdev_del', 'data': {'id': 'str'} }

##
# @NetdevNoneOptions
#
# Use it alone to have zero network devices.
#
# Since 1.2
##
{ 'type': 'NetdevNoneOptions',
  'data': { } }

##
# @NetLegacyNicOptions
#
# Create a new Network Interface Card.
#
# @netdev: #optional id of -netdev to connect to
#
# @macaddr: #optional MAC address
#
# @model: #optional device model (e1000, rtl8139, virtio etc.)
#
# @addr: #optional PCI device address
#
# @vectors: #optional number of MSI-x vectors, 0 to disable MSI-X
#
# Since 1.2
##
{ 'type': 'NetLegacyNicOptions',
  'data': {
    '*netdev':  'str',
    '*macaddr': 'str',
    '*model':   'str',
    '*addr':    'str',
    '*vectors': 'uint32' } }

##
# @String
#
# A fat type wrapping 'str', to be embedded in lists.
#
# Since 1.2
##
{ 'type': 'String',
  'data': {
    'str': 'str' } }

##
# @NetdevUserOptions
#
# Use the user mode network stack which requires no administrator privilege to
# run.
#
# @hostname: #optional client hostname reported by the builtin DHCP server
#
# @restrict: #optional isolate the guest from the host
#
# @ip: #optional legacy parameter, use net= instead
#
# @net: #optional IP address and optional netmask
#
# @host: #optional guest-visible address of the host
#
# @tftp: #optional root directory of the built-in TFTP server
#
# @bootfile: #optional BOOTP filename, for use with tftp=
#
# @dhcpstart: #optional the first of the 16 IPs the built-in DHCP server can
#             assign
#
# @dns: #optional guest-visible address of the virtual nameserver
#
# @smb: #optional root directory of the built-in SMB server
#
# @smbserver: #optional IP address of the built-in SMB server
#
# @hostfwd: #optional redirect incoming TCP or UDP host connections to guest
#           endpoints
#
# @guestfwd: #optional forward guest TCP connections
#
# Since 1.2
##
{ 'type': 'NetdevUserOptions',
  'data': {
    '*hostname':  'str',
    '*restrict':  'bool',
    '*ip':        'str',
    '*net':       'str',
    '*host':      'str',
    '*tftp':      'str',
    '*bootfile':  'str',
    '*dhcpstart': 'str',
    '*dns':       'str',
    '*smb':       'str',
    '*smbserver': 'str',
    '*hostfwd':   ['String'],
    '*guestfwd':  ['String'] } }

##
# @NetdevTapOptions
#
# Connect the host TAP network interface name to the VLAN.
#
# @ifname: #optional interface name
#
# @fd: #optional file descriptor of an already opened tap
#
# @script: #optional script to initialize the interface
#
# @downscript: #optional script to shut down the interface
#
# @helper: #optional command to execute to configure bridge
#
# @sndbuf: #optional send buffer limit. Understands [TGMKkb] suffixes.
#
# @vnet_hdr: #optional enable the IFF_VNET_HDR flag on the tap interface
#
# @vhost: #optional enable vhost-net network accelerator
#
# @vhostfd: #optional file descriptor of an already opened vhost net device
#
# @vhostforce: #optional vhost on for non-MSIX virtio guests
#
# Since 1.2
##
{ 'type': 'NetdevTapOptions',
  'data': {
    '*ifname':     'str',
    '*fd':         'str',
    '*script':     'str',
    '*downscript': 'str',
    '*helper':     'str',
    '*sndbuf':     'size',
    '*vnet_hdr':   'bool',
    '*vhost':      'bool',
    '*vhostfd':    'str',
    '*vhostforce': 'bool' } }

##
# @NetdevSocketOptions
#
# Connect the VLAN to a remote VLAN in another QEMU virtual machine using a TCP
# socket connection.
#
# @fd: #optional file descriptor of an already opened socket
#
# @listen: #optional port number, and optional hostname, to listen on
#
# @connect: #optional port number, and optional hostname, to connect to
#
# @mcast: #optional UDP multicast address and port number
#
# @localaddr: #optional source address and port for multicast and udp packets
#
# @udp: #optional UDP unicast address and port number
#
# Since 1.2
##
{ 'type': 'NetdevSocketOptions',
  'data': {
    '*fd':        'str',
    '*listen':    'str',
    '*connect':   'str',
    '*mcast':     'str',
    '*localaddr': 'str',
    '*udp':       'str' } }

##
# @NetdevVdeOptions
#
# Connect the VLAN to a vde switch running on the host.
#
# @sock: #optional socket path
#
# @port: #optional port number
#
# @group: #optional group owner of socket
#
# @mode: #optional permissions for socket
#
# Since 1.2
##
{ 'type': 'NetdevVdeOptions',
  'data': {
    '*sock':  'str',
    '*port':  'uint16',
    '*group': 'str',
    '*mode':  'uint16' } }

##
# @NetdevDumpOptions
#
# Dump VLAN network traffic to a file.
#
# @len: #optional per-packet size limit (64k default). Understands [TGMKkb]
# suffixes.
#
# @file: #optional dump file path (default is qemu-vlan0.pcap)
#
# Since 1.2
##
{ 'type': 'NetdevDumpOptions',
  'data': {
    '*len':  'size',
    '*file': 'str' } }

##
# @NetdevBridgeOptions
#
# Connect a host TAP network interface to a host bridge device.
#
# @br: #optional bridge name
#
# @helper: #optional command to execute to configure bridge
#
# Since 1.2
##
{ 'type': 'NetdevBridgeOptions',
  'data': {
    '*br':     'str',
    '*helper': 'str' } }

##
# @NetdevHubPortOptions
#
# Connect two or more net clients through a software hub.
#
# @hubid: hub identifier number
#
# Since 1.2
##
{ 'type': 'NetdevHubPortOptions',
  'data': {
    'hubid':     'int32' } }

##
# @NetClientOptions
#
# A discriminated record of network device traits.
#
# Since 1.2
##
{ 'union': 'NetClientOptions',
  'data': {
    'none':     'NetdevNoneOptions',
    'nic':      'NetLegacyNicOptions',
    'user':     'NetdevUserOptions',
    'tap':      'NetdevTapOptions',
    'socket':   'NetdevSocketOptions',
    'vde':      'NetdevVdeOptions',
    'dump':     'NetdevDumpOptions',
    'bridge':   'NetdevBridgeOptions',
    'hubport':  'NetdevHubPortOptions' } }

##
# @NetLegacy
#
# Captures the configuration of a network device; legacy.
#
# @vlan: #optional vlan number
#
# @id: #optional identifier for monitor commands
#
# @name: #optional identifier for monitor commands, ignored if @id is present
#
# @opts: device type specific properties (legacy)
#
# Since 1.2
##
{ 'type': 'NetLegacy',
  'data': {
    '*vlan': 'int32',
    '*id':   'str',
    '*name': 'str',
    'opts':  'NetClientOptions' } }

##
# @Netdev
#
# Captures the configuration of a network device.
#
# @id: identifier for monitor commands.
#
# @opts: device type specific properties
#
# Since 1.2
##
{ 'type': 'Netdev',
  'data': {
    'id':   'str',
    'opts': 'NetClientOptions' } }

##
# @getfd:
#
# Receive a file descriptor via SCM rights and assign it a name
#
# @fdname: file descriptor name
#
# Returns: Nothing on success
#
# Since: 0.14.0
#
# Notes: If @fdname already exists, the file descriptor assigned to
#        it will be closed and replaced by the received file
#        descriptor.
#        The 'closefd' command can be used to explicitly close the
#        file descriptor when it is no longer needed.
##
{ 'command': 'getfd', 'data': {'fdname': 'str'} }

##
# @closefd:
#
# Close a file descriptor previously passed via SCM rights
#
# @fdname: file descriptor name
#
# Returns: Nothing on success
#
# Since: 0.14.0
##
{ 'command': 'closefd', 'data': {'fdname': 'str'} }

##
# @MachineInfo:
#
# Information describing a machine.
#
# @name: the name of the machine
#
# @alias: #optional an alias for the machine name
#
# @default: #optional whether the machine is default
#
# Since: 1.2.0
##
{ 'type': 'MachineInfo',
  'data': { 'name': 'str', '*alias': 'str',
            '*is-default': 'bool' } }

##
# @query-machines:
#
# Return a list of supported machines
#
# Returns: a list of MachineInfo
#
# Since: 1.2.0
##
{ 'command': 'query-machines', 'returns': ['MachineInfo'] }

##
# @CpuDefinitionInfo:
#
# Virtual CPU definition.
#
# @name: the name of the CPU definition
#
# Since: 1.2.0
##
{ 'type': 'CpuDefinitionInfo',
  'data': { 'name': 'str' } }

##
# @query-cpu-definitions:
#
# Return a list of supported virtual CPU definitions
#
# Returns: a list of CpuDefInfo
#
# Since: 1.2.0
##
{ 'command': 'query-cpu-definitions', 'returns': ['CpuDefinitionInfo'] }