| /* | |
| * Validate -readconfig | |
| * | |
| * Copyright (c) 2022 Red Hat, Inc. | |
| * | |
| * This work is licensed under the terms of the GNU GPL, version 2 or later. | |
| * See the COPYING file in the top-level directory. | |
| */ | |
| #include "qemu/osdep.h" | |
| #include "libqtest.h" | |
| #include "qapi/error.h" | |
| #include "qapi/qapi-visit-machine.h" | |
| #include "qapi/qapi-visit-qom.h" | |
| #include "qapi/qapi-visit-ui.h" | |
| #include "qobject/qdict.h" | |
| #include "qobject/qlist.h" | |
| #include "qapi/qobject-input-visitor.h" | |
| #include "qobject/qstring.h" | |
| #include "qemu/units.h" | |
| static QTestState *qtest_init_with_config(const char *cfgdata) | |
| { | |
| GError *error = NULL; | |
| g_autofree char *args = NULL; | |
| int cfgfd = -1; | |
| g_autofree char *cfgpath = NULL; | |
| QTestState *qts; | |
| ssize_t ret; | |
| cfgfd = g_file_open_tmp("readconfig-test-XXXXXX", &cfgpath, &error); | |
| g_assert_no_error(error); | |
| g_assert_cmpint(cfgfd, >=, 0); | |
| ret = qemu_write_full(cfgfd, cfgdata, strlen(cfgdata)); | |
| close(cfgfd); | |
| if (ret < 0) { | |
| unlink(cfgpath); | |
| } | |
| g_assert_cmpint(ret, ==, strlen(cfgdata)); | |
| args = g_strdup_printf("-nodefaults -machine none -readconfig %s", cfgpath); | |
| qts = qtest_init(args); | |
| unlink(cfgpath); | |
| return qts; | |
| } | |
| static void test_x86_memdev_resp(QObject *res, const char *mem_id, int size) | |
| { | |
| Visitor *v; | |
| g_autoptr(MemdevList) memdevs = NULL; | |
| Memdev *memdev; | |
| g_assert(res); | |
| v = qobject_input_visitor_new(res); | |
| visit_type_MemdevList(v, NULL, &memdevs, &error_abort); | |
| g_assert(memdevs); | |
| g_assert(memdevs->value); | |
| g_assert(!memdevs->next); | |
| memdev = memdevs->value; | |
| g_assert_cmpstr(memdev->id, ==, mem_id); | |
| g_assert_cmpint(memdev->size, ==, size * MiB); | |
| visit_free(v); | |
| } | |
| static void test_x86_memdev(void) | |
| { | |
| QDict *resp; | |
| QTestState *qts; | |
| const char *cfgdata = | |
| "[memory]\n" | |
| "size = \"200\""; | |
| qts = qtest_init_with_config(cfgdata); | |
| /* Test valid command */ | |
| resp = qtest_qmp(qts, "{ 'execute': 'query-memdev' }"); | |
| test_x86_memdev_resp(qdict_get(resp, "return"), "ram", 200); | |
| qobject_unref(resp); | |
| qtest_quit(qts); | |
| } | |
| /* FIXME: The test is currently broken on FreeBSD */ | |
| #if defined(CONFIG_SPICE) && !defined(__FreeBSD__) | |
| static void test_spice_resp(QObject *res) | |
| { | |
| Visitor *v; | |
| g_autoptr(SpiceInfo) spice = NULL; | |
| g_assert(res); | |
| v = qobject_input_visitor_new(res); | |
| visit_type_SpiceInfo(v, "spice", &spice, &error_abort); | |
| g_assert(spice); | |
| g_assert(spice->enabled); | |
| visit_free(v); | |
| } | |
| static void test_spice(void) | |
| { | |
| QDict *resp; | |
| QTestState *qts; | |
| const char *cfgdata = | |
| "[spice]\n" | |
| #ifndef WIN32 | |
| "unix = \"on\"\n" | |
| #endif | |
| "disable-ticketing = \"on\"\n"; | |
| qts = qtest_init_with_config(cfgdata); | |
| /* Test valid command */ | |
| resp = qtest_qmp(qts, "{ 'execute': 'query-spice' }"); | |
| test_spice_resp(qdict_get(resp, "return")); | |
| qobject_unref(resp); | |
| qtest_quit(qts); | |
| } | |
| #endif | |
| static void test_object_available(QObject *res, const char *name, | |
| const char *type) | |
| { | |
| Visitor *v; | |
| g_autoptr(ObjectPropertyInfoList) objs = NULL; | |
| ObjectPropertyInfoList *tmp; | |
| ObjectPropertyInfo *obj; | |
| bool object_available = false; | |
| g_autofree char *childtype = g_strdup_printf("child<%s>", type); | |
| g_assert(res); | |
| v = qobject_input_visitor_new(res); | |
| visit_type_ObjectPropertyInfoList(v, NULL, &objs, &error_abort); | |
| g_assert(objs); | |
| tmp = objs; | |
| while (tmp) { | |
| g_assert(tmp->value); | |
| obj = tmp->value; | |
| if (g_str_equal(obj->name, name) && g_str_equal(obj->type, childtype)) { | |
| object_available = true; | |
| break; | |
| } | |
| tmp = tmp->next; | |
| } | |
| g_assert(object_available); | |
| visit_free(v); | |
| } | |
| static void test_object_rng(void) | |
| { | |
| QDict *resp; | |
| QTestState *qts; | |
| const char *cfgdata = | |
| "[object]\n" | |
| "qom-type = \"rng-builtin\"\n" | |
| "id = \"rng0\"\n"; | |
| qts = qtest_init_with_config(cfgdata); | |
| /* Test valid command */ | |
| resp = qtest_qmp(qts, | |
| "{ 'execute': 'qom-list'," | |
| " 'arguments': {'path': '/objects' }}"); | |
| test_object_available(qdict_get(resp, "return"), "rng0", "rng-builtin"); | |
| qobject_unref(resp); | |
| qtest_quit(qts); | |
| } | |
| static void test_docs_config_ich9(void) | |
| { | |
| QTestState *qts; | |
| QDict *resp; | |
| QObject *qobj; | |
| qts = qtest_initf("-nodefaults -readconfig docs/config/ich9-ehci-uhci.cfg"); | |
| resp = qtest_qmp(qts, "{ 'execute': 'qom-list'," | |
| " 'arguments': {'path': '/machine/peripheral' }}"); | |
| qobj = qdict_get(resp, "return"); | |
| test_object_available(qobj, "ehci", "ich9-usb-ehci1"); | |
| test_object_available(qobj, "uhci-1", "ich9-usb-uhci1"); | |
| test_object_available(qobj, "uhci-2", "ich9-usb-uhci2"); | |
| test_object_available(qobj, "uhci-3", "ich9-usb-uhci3"); | |
| qobject_unref(resp); | |
| qtest_quit(qts); | |
| } | |
| #if defined(CONFIG_POSIX) && defined(CONFIG_SLIRP) | |
| static char *make_temp_img(const char *template, const char *format, int size) | |
| { | |
| GError *error = NULL; | |
| char *temp_name; | |
| int fd; | |
| /* Create a temporary image names */ | |
| fd = g_file_open_tmp(template, &temp_name, &error); | |
| if (fd == -1) { | |
| fprintf(stderr, "unable to create file: %s\n", error->message); | |
| g_error_free(error); | |
| return NULL; | |
| } | |
| close(fd); | |
| if (!mkimg(temp_name, format, size)) { | |
| fprintf(stderr, "qemu-img failed to create %s\n", temp_name); | |
| g_free(temp_name); | |
| return NULL; | |
| } | |
| return temp_name; | |
| } | |
| struct device { | |
| const char *name; | |
| const char *type; | |
| }; | |
| static void test_docs_q35(const char *input_file, struct device *devices) | |
| { | |
| QTestState *qts; | |
| QDict *resp; | |
| QObject *qobj; | |
| int ret, i; | |
| g_autofree char *cfg_file = NULL, *sedcmd = NULL; | |
| g_autofree char *hd_file = NULL, *cd_file = NULL; | |
| /* Check that all the devices are available in the QEMU binary */ | |
| for (i = 0; devices[i].name; i++) { | |
| if (!qtest_has_device(devices[i].type)) { | |
| g_test_skip("one of the required devices is not available"); | |
| return; | |
| } | |
| } | |
| hd_file = make_temp_img("qtest_disk_XXXXXX.qcow2", "qcow2", 1); | |
| cd_file = make_temp_img("qtest_cdrom_XXXXXX.iso", "raw", 1); | |
| if (!hd_file || !cd_file) { | |
| g_test_skip("could not create disk images"); | |
| goto cleanup; | |
| } | |
| /* Create a temporary config file where we replace the disk image names */ | |
| ret = g_file_open_tmp("q35-emulated-XXXXXX.cfg", &cfg_file, NULL); | |
| if (ret == -1) { | |
| g_test_skip("could not create temporary config file"); | |
| goto cleanup; | |
| } | |
| close(ret); | |
| sedcmd = g_strdup_printf("sed -e 's,guest.qcow2,%s,' -e 's,install.iso,%s,'" | |
| " %s %s > '%s'", | |
| hd_file, cd_file, | |
| !qtest_has_accel("kvm") ? "-e '/accel/d'" : "", | |
| input_file, cfg_file); | |
| ret = system(sedcmd); | |
| if (ret) { | |
| g_test_skip("could not modify temporary config file"); | |
| goto cleanup; | |
| } | |
| qts = qtest_initf("-machine none -nodefaults -readconfig %s", cfg_file); | |
| /* Check memory size */ | |
| resp = qtest_qmp(qts, "{ 'execute': 'query-memdev' }"); | |
| test_x86_memdev_resp(qdict_get(resp, "return"), "pc.ram", 1024); | |
| qobject_unref(resp); | |
| resp = qtest_qmp(qts, "{ 'execute': 'qom-list'," | |
| " 'arguments': {'path': '/machine/peripheral' }}"); | |
| qobj = qdict_get(resp, "return"); | |
| /* Check that all the devices have been created */ | |
| for (i = 0; devices[i].name; i++) { | |
| test_object_available(qobj, devices[i].name, devices[i].type); | |
| } | |
| qobject_unref(resp); | |
| qtest_quit(qts); | |
| cleanup: | |
| if (hd_file) { | |
| unlink(hd_file); | |
| } | |
| if (cd_file) { | |
| unlink(cd_file); | |
| } | |
| if (cfg_file) { | |
| unlink(cfg_file); | |
| } | |
| } | |
| static void test_docs_q35_emulated(void) | |
| { | |
| struct device devices[] = { | |
| { "ich9-pcie-port-1", "ioh3420" }, | |
| { "ich9-pcie-port-2", "ioh3420" }, | |
| { "ich9-pcie-port-3", "ioh3420" }, | |
| { "ich9-pcie-port-4", "ioh3420" }, | |
| { "ich9-pci-bridge", "i82801b11-bridge" }, | |
| { "ich9-ehci-1", "ich9-usb-ehci1" }, | |
| { "ich9-ehci-2", "ich9-usb-ehci2" }, | |
| { "ich9-uhci-1", "ich9-usb-uhci1" }, | |
| { "ich9-uhci-2", "ich9-usb-uhci2" }, | |
| { "ich9-uhci-3", "ich9-usb-uhci3" }, | |
| { "ich9-uhci-4", "ich9-usb-uhci4" }, | |
| { "ich9-uhci-5", "ich9-usb-uhci5" }, | |
| { "ich9-uhci-6", "ich9-usb-uhci6" }, | |
| { "sata-disk", "ide-hd" }, | |
| { "sata-optical-disk", "ide-cd" }, | |
| { "net", "e1000" }, | |
| { "video", "VGA" }, | |
| { "ich9-hda-audio", "ich9-intel-hda" }, | |
| { "ich9-hda-duplex", "hda-duplex" }, | |
| { NULL, NULL } | |
| }; | |
| test_docs_q35("docs/config/q35-emulated.cfg", devices); | |
| } | |
| static void test_docs_q35_virtio_graphical(void) | |
| { | |
| struct device devices[] = { | |
| { "pcie.1", "pcie-root-port" }, | |
| { "pcie.2", "pcie-root-port" }, | |
| { "pcie.3", "pcie-root-port" }, | |
| { "pcie.4", "pcie-root-port" }, | |
| { "pcie.5", "pcie-root-port" }, | |
| { "pcie.6", "pcie-root-port" }, | |
| { "pcie.7", "pcie-root-port" }, | |
| { "pcie.8", "pcie-root-port" }, | |
| { "scsi", "virtio-scsi-pci" }, | |
| { "scsi-disk", "scsi-hd" }, | |
| { "scsi-optical-disk", "scsi-cd" }, | |
| { "net", "virtio-net-pci" }, | |
| { "usb", "nec-usb-xhci" }, | |
| { "tablet", "usb-tablet" }, | |
| { "video", "qxl-vga" }, | |
| { "sound", "ich9-intel-hda" }, | |
| { "duplex", "hda-duplex" }, | |
| { NULL, NULL } | |
| }; | |
| test_docs_q35("docs/config/q35-virtio-graphical.cfg", devices); | |
| } | |
| static void test_docs_q35_virtio_serial(void) | |
| { | |
| struct device devices[] = { | |
| { "pcie.1", "pcie-root-port" }, | |
| { "pcie.2", "pcie-root-port" }, | |
| { "pcie.3", "pcie-root-port" }, | |
| { "pcie.4", "pcie-root-port" }, | |
| { "pcie.5", "pcie-root-port" }, | |
| { "pcie.6", "pcie-root-port" }, | |
| { "pcie.7", "pcie-root-port" }, | |
| { "pcie.8", "pcie-root-port" }, | |
| { "scsi", "virtio-scsi-pci" }, | |
| { "scsi-disk", "scsi-hd" }, | |
| { "scsi-optical-disk", "scsi-cd" }, | |
| { "net", "virtio-net-pci" }, | |
| { NULL, NULL } | |
| }; | |
| test_docs_q35("docs/config/q35-virtio-serial.cfg", devices); | |
| } | |
| #endif /* CONFIG_LINUX */ | |
| int main(int argc, char *argv[]) | |
| { | |
| const char *arch; | |
| g_test_init(&argc, &argv, NULL); | |
| arch = qtest_get_arch(); | |
| if (g_str_equal(arch, "i386") || | |
| g_str_equal(arch, "x86_64")) { | |
| qtest_add_func("readconfig/x86/memdev", test_x86_memdev); | |
| if (qtest_has_device("ich9-usb-ehci1") && | |
| qtest_has_device("ich9-usb-uhci1")) { | |
| qtest_add_func("readconfig/x86/ich9-ehci-uhci", test_docs_config_ich9); | |
| } | |
| #if defined(CONFIG_POSIX) && defined(CONFIG_SLIRP) | |
| qtest_add_func("readconfig/x86/q35-emulated", test_docs_q35_emulated); | |
| qtest_add_func("readconfig/x86/q35-virtio-graphical", | |
| test_docs_q35_virtio_graphical); | |
| if (g_test_slow()) { | |
| /* | |
| * q35-virtio-serial.cfg is a subset of q35-virtio-graphical.cfg, | |
| * so we can skip the test in quick mode | |
| */ | |
| qtest_add_func("readconfig/x86/q35-virtio-serial", | |
| test_docs_q35_virtio_serial); | |
| } | |
| #endif | |
| } | |
| #if defined(CONFIG_SPICE) && !defined(__FreeBSD__) | |
| qtest_add_func("readconfig/spice", test_spice); | |
| #endif | |
| qtest_add_func("readconfig/object-rng", test_object_rng); | |
| return g_test_run(); | |
| } |