|
# Copyright (c) 2015, Intel Corporation |
|
# All rights reserved. |
|
# |
|
# SPDX-License-Identifier: BSD-3-Clause |
|
# |
|
# Redistribution and use in source and binary forms, with or without |
|
# modification, are permitted provided that the following conditions are met: |
|
# |
|
# * Redistributions of source code must retain the above copyright notice, |
|
# this list of conditions and the following disclaimer. |
|
# * Redistributions in binary form must reproduce the above copyright notice, |
|
# this list of conditions and the following disclaimer in the documentation |
|
# and/or other materials provided with the distribution. |
|
# * Neither the name of Intel Corporation nor the names of its contributors |
|
# may be used to endorse or promote products derived from this software |
|
# without specific prior written permission. |
|
# |
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND |
|
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
|
# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
|
# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR |
|
# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
|
# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
|
# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON |
|
# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
|
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
|
# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
|
|
|
# This script runs only from the biosbits VM. |
|
|
|
"""SMBIOS/DMI module.""" |
|
|
|
import bits |
|
import bitfields |
|
import ctypes |
|
import redirect |
|
import struct |
|
import uuid |
|
import unpack |
|
import ttypager |
|
import sys |
|
|
|
class SMBIOS(unpack.Struct): |
|
def __new__(cls): |
|
if sys.platform == "BITS-EFI": |
|
import efi |
|
sm_ptr = efi.system_table.ConfigurationTableDict.get(efi.SMBIOS_TABLE_GUID) |
|
else: |
|
address = 0xF0000 |
|
mem = bits.memory(0xF0000, 0x10000) |
|
for offset in range(0, len(mem), 16): |
|
signature = (ctypes.c_char * 4).from_address(address + offset).value |
|
if signature == "_SM_": |
|
entry_point_length = ctypes.c_ubyte.from_address(address + offset + 5).value |
|
csum = sum(map(ord, mem[offset:offset + entry_point_length])) & 0xff |
|
if csum == 0: |
|
sm_ptr = address + offset |
|
break |
|
else: |
|
return None |
|
|
|
if not sm_ptr: |
|
return None |
|
|
|
sm = super(SMBIOS, cls).__new__(cls) |
|
sm._header_memory = bits.memory(sm_ptr, 0x1f) |
|
return sm |
|
|
|
def __init__(self): |
|
super(SMBIOS, self).__init__() |
|
u = unpack.Unpackable(self._header_memory) |
|
self.add_field('header', Header(u)) |
|
self._structure_memory = bits.memory(self.header.structure_table_address, self.header.structure_table_length) |
|
u = unpack.Unpackable(self._structure_memory) |
|
self.add_field('structures', unpack.unpack_all(u, _smbios_structures, self), unpack.format_each("\n\n{!r}")) |
|
|
|
def structure_type(self, num): |
|
'''Dumps structure of given Type if present''' |
|
try: |
|
types_present = [self.structures[x].smbios_structure_type for x in range(len(self.structures))] |
|
matrix = dict() |
|
for index in range(len(types_present)): |
|
if types_present.count(types_present[index]) == 1: |
|
matrix[types_present[index]] = self.structures[index] |
|
else: # if multiple structures of the same type, return a list of structures for the type number |
|
if matrix.has_key(types_present[index]): |
|
matrix[types_present[index]].append(self.structures[index]) |
|
else: |
|
matrix[types_present[index]] = [self.structures[index]] |
|
return matrix[num] |
|
except: |
|
print "Failure: Type {} - not found".format(num) |
|
|
|
class Header(unpack.Struct): |
|
def __new__(cls, u): |
|
return super(Header, cls).__new__(cls) |
|
|
|
def __init__(self, u): |
|
super(Header, self).__init__() |
|
self.raw_data = u.unpack_rest() |
|
u = unpack.Unpackable(self.raw_data) |
|
self.add_field('anchor_string', u.unpack_one("4s")) |
|
self.add_field('checksum', u.unpack_one("B")) |
|
self.add_field('length', u.unpack_one("B")) |
|
self.add_field('major_version', u.unpack_one("B")) |
|
self.add_field('minor_version', u.unpack_one("B")) |
|
self.add_field('max_structure_size', u.unpack_one("<H")) |
|
self.add_field('entry_point_revision', u.unpack_one("B")) |
|
self.add_field('formatted_area', u.unpack_one("5s")) |
|
self.add_field('intermediate_anchor_string', u.unpack_one("5s")) |
|
self.add_field('intermediate_checksum', u.unpack_one("B")) |
|
self.add_field('structure_table_length', u.unpack_one("<H")) |
|
self.add_field('structure_table_address', u.unpack_one("<I")) |
|
self.add_field('number_structures', u.unpack_one("<H")) |
|
self.add_field('bcd_revision', u.unpack_one("B")) |
|
if not u.at_end(): |
|
self.add_field('data', u.unpack_rest()) |
|
|
|
class SmbiosBaseStructure(unpack.Struct): |
|
def __new__(cls, u, sm): |
|
t = u.unpack_peek_one("B") |
|
if cls.smbios_structure_type is not None and t != cls.smbios_structure_type: |
|
return None |
|
return super(SmbiosBaseStructure, cls).__new__(cls) |
|
|
|
def __init__(self, u, sm): |
|
super(SmbiosBaseStructure, self).__init__() |
|
self.start_offset = u.offset |
|
length = u.unpack_peek_one("<xB") |
|
self.raw_data = u.unpack_raw(length) |
|
self.u = unpack.Unpackable(self.raw_data) |
|
|
|
self.strings_offset = u.offset |
|
def unpack_string(): |
|
return "".join(iter(lambda: u.unpack_one("c"), "\x00")) |
|
strings = list(iter(unpack_string, "")) |
|
if not strings: |
|
u.skip(1) |
|
|
|
self.strings_length = u.offset - self.strings_offset |
|
self.raw_strings = str(bits.memory(sm.header.structure_table_address + self.strings_offset, self.strings_length)) |
|
|
|
if len(strings): |
|
self.strings = strings |
|
|
|
self.add_field('type', self.u.unpack_one("B")) |
|
self.add_field('length', self.u.unpack_one("B")) |
|
self.add_field('handle', self.u.unpack_one("<H")) |
|
|
|
def fini(self): |
|
if not self.u.at_end(): |
|
self.add_field('data', self.u.unpack_rest()) |
|
del self.u |
|
|
|
def fmtstr(self, i): |
|
"""Format the specified index and the associated string""" |
|
return "{} '{}'".format(i, self.getstr(i)) |
|
|
|
def getstr(self, i): |
|
"""Get the string associated with the given index""" |
|
if i == 0: |
|
return "(none)" |
|
if not hasattr(self, "strings"): |
|
return "(error: structure has no strings)" |
|
if i > len(self.strings): |
|
return "(error: string index out of range)" |
|
return self.strings[i - 1] |
|
|
|
class BIOSInformation(SmbiosBaseStructure): |
|
smbios_structure_type = 0 |
|
|
|
def __init__(self, u, sm): |
|
super(BIOSInformation, self).__init__(u, sm) |
|
u = self.u |
|
try: |
|
self.add_field('vendor', u.unpack_one("B"), self.fmtstr) |
|
self.add_field('version', u.unpack_one("B"), self.fmtstr) |
|
self.add_field('starting_address_segment', u.unpack_one("<H")) |
|
self.add_field('release_date', u.unpack_one("B"), self.fmtstr) |
|
self.add_field('rom_size', u.unpack_one("B")) |
|
self.add_field('characteristics', u.unpack_one("<Q")) |
|
minor_version_str = str(sm.header.minor_version) # 34 is .34, 4 is .4, 41 is .41; compare ASCIIbetically to compare initial digits rather than numeric value |
|
if (sm.header.major_version, minor_version_str) >= (2,"4"): |
|
characteristic_bytes = 2 |
|
else: |
|
characteristic_bytes = self.length - 0x12 |
|
self.add_field('characteristics_extensions', [u.unpack_one("B") for b in range(characteristic_bytes)]) |
|
if (sm.header.major_version, minor_version_str) >= (2,"4"): |
|
self.add_field('major_release', u.unpack_one("B")) |
|
self.add_field('minor_release', u.unpack_one("B")) |
|
self.add_field('ec_major_release', u.unpack_one("B")) |
|
self.add_field('ec_minor_release', u.unpack_one("B")) |
|
except: |
|
self.decode_failure = True |
|
print "Error parsing BIOSInformation" |
|
import traceback |
|
traceback.print_exc() |
|
self.fini() |
|
|
|
class SystemInformation(SmbiosBaseStructure): |
|
smbios_structure_type = 1 |
|
|
|
def __init__(self, u, sm): |
|
super(SystemInformation, self).__init__(u, sm) |
|
u = self.u |
|
try: |
|
self.add_field('manufacturer', u.unpack_one("B"), self.fmtstr) |
|
self.add_field('product_name', u.unpack_one("B"), self.fmtstr) |
|
self.add_field('version', u.unpack_one("B"), self.fmtstr) |
|
self.add_field('serial_number', u.unpack_one("B"), self.fmtstr) |
|
if self.length > 0x8: |
|
self.add_field('uuid', uuid.UUID(bytes_le=u.unpack_one("16s"))) |
|
wakeup_types = { |
|
0: 'Reserved', |
|
1: 'Other', |
|
2: 'Unknown', |
|
3: 'APM Timer', |
|
4: 'Modem Ring', |
|
5: 'LAN Remote', |
|
6: 'Power Switch', |
|
7: 'PCI PME#', |
|
8: 'AC Power Restored' |
|
} |
|
self.add_field('wakeup_type', u.unpack_one("B"), unpack.format_table("{}", wakeup_types)) |
|
if self.length > 0x19: |
|
self.add_field('sku_number', u.unpack_one("B"), self.fmtstr) |
|
self.add_field('family', u.unpack_one("B"), self.fmtstr) |
|
except: |
|
self.decode_failure = True |
|
print "Error parsing SystemInformation" |
|
import traceback |
|
traceback.print_exc() |
|
self.fini() |
|
|
|
_board_types = { |
|
1: 'Unknown', |
|
2: 'Other', |
|
3: 'Server Blade', |
|
4: 'Connectivity Switch', |
|
5: 'System Management Module', |
|
6: 'Processor Module', |
|
7: 'I/O Module', |
|
8: 'Memory Module', |
|
9: 'Daughter Board', |
|
0xA: 'Motherboard', |
|
0xB: 'Processor/Memory Module', |
|
0xC: 'Processor/IO Module', |
|
0xD: 'Interconnect Board' |
|
} |
|
|
|
class BaseboardInformation(SmbiosBaseStructure): |
|
smbios_structure_type = 2 |
|
|
|
def __init__(self, u, sm): |
|
super(BaseboardInformation, self).__init__(u, sm) |
|
u = self.u |
|
try: |
|
self.add_field('manufacturer', u.unpack_one("B"), self.fmtstr) |
|
self.add_field('product', u.unpack_one("B"), self.fmtstr) |
|
self.add_field('version', u.unpack_one("B"), self.fmtstr) |
|
self.add_field('serial_number', u.unpack_one("B"), self.fmtstr) |
|
|
|
if self.length > 0x8: |
|
self.add_field('asset_tag', u.unpack_one("B"), self.fmtstr) |
|
|
|
if self.length > 0x9: |
|
self.add_field('feature_flags', u.unpack_one("B")) |
|
self.add_field('hosting_board', bool(bitfields.getbits(self.feature_flags, 0)), "feature_flags[0]={}") |
|
self.add_field('requires_daughter_card', bool(bitfields.getbits(self.feature_flags, 1)), "feature_flags[1]={}") |
|
self.add_field('removable', bool(bitfields.getbits(self.feature_flags, 2)), "feature_flags[2]={}") |
|
self.add_field('replaceable', bool(bitfields.getbits(self.feature_flags, 3)), "feature_flags[3]={}") |
|
self.add_field('hot_swappable', bool(bitfields.getbits(self.feature_flags, 4)), "feature_flags[4]={}") |
|
|
|
if self.length > 0xA: |
|
self.add_field('location', u.unpack_one("B"), self.fmtstr) |
|
|
|
if self.length > 0xB: |
|
self.add_field('chassis_handle', u.unpack_one("<H")) |
|
|
|
if self.length > 0xD: |
|
self.add_field('board_type', u.unpack_one("B"), unpack.format_table("{}", _board_types)) |
|
|
|
if self.length > 0xE: |
|
self.add_field('handle_count', u.unpack_one("B")) |
|
if self.handle_count > 0: |
|
self.add_field('contained_object_handles', tuple(u.unpack_one("<H") for i in range(self.handle_count))) |
|
except: |
|
self.decode_failure = True |
|
print "Error parsing BaseboardInformation" |
|
import traceback |
|
traceback.print_exc() |
|
self.fini() |
|
|
|
class SystemEnclosure(SmbiosBaseStructure): |
|
smbios_structure_type = 3 |
|
|
|
def __init__(self, u, sm): |
|
super(SystemEnclosure, self).__init__(u, sm) |
|
u = self.u |
|
try: |
|
self.add_field('manufacturer', u.unpack_one("B"), self.fmtstr) |
|
self.add_field('enumerated_type', u.unpack_one("B")) |
|
self.add_field('chassis_lock_present', bool(bitfields.getbits(self.enumerated_type, 7)), "enumerated_type[7]={}") |
|
board_types = { |
|
0x01: 'Other', |
|
0x02: 'Unknown', |
|
0x03: 'Desktop', |
|
0x04: 'Low Profile Desktop', |
|
0x05: 'Pizza Box', |
|
0x06: 'Mini Tower', |
|
0x07: 'Tower', |
|
0x08: 'Portable', |
|
0x09: 'Laptop', |
|
0x0A: 'Notebook', |
|
0x0B: 'Hand Held', |
|
0x0C: 'Docking Station', |
|
0x0D: 'All in One', |
|
0x0E: 'Sub Notebook', |
|
0x0F: 'Space-saving', |
|
0x10: 'Lunch Box', |
|
0x11: 'Main Server Chassis', |
|
0x12: 'Expansion Chassis', |
|
0x13: 'SubChassis', |
|
0x14: 'Bus Expansion Chassis', |
|
0x15: 'Peripheral Chassis', |
|
0x16: 'RAID Chassis', |
|
0x17: 'Rack Mount Chassis', |
|
0x18: 'Sealed-case PC', |
|
0x19: 'Multi-system chassis W', |
|
0x1A: 'Compact PCI', |
|
0x1B: 'Advanced TCA', |
|
0x1C: 'Blade', |
|
0x1D: 'Blade Enclosure', |
|
} |
|
self.add_field('system_enclosure_type', bitfields.getbits(self.enumerated_type, 6, 0), unpack.format_table("enumerated_type[6:0]={}", board_types)) |
|
self.add_field('version', u.unpack_one("B"), self.fmtstr) |
|
self.add_field('serial_number', u.unpack_one("B"), self.fmtstr) |
|
self.add_field('asset_tag', u.unpack_one("B"), self.fmtstr) |
|
minor_version_str = str(sm.header.minor_version) # 34 is .34, 4 is .4, 41 is .41; compare ASCIIbetically to compare initial digits rather than numeric value |
|
if self.length > 9: |
|
chassis_states = { |
|
0x01: 'Other', |
|
0x02: 'Unknown', |
|
0x03: 'Safe', |
|
0x04: 'Warning', |
|
0x05: 'Critical', |
|
0x06: 'Non-recoverable', |
|
} |
|
self.add_field('bootup_state', u.unpack_one("B"), unpack.format_table("{}", chassis_states)) |
|
self.add_field('power_supply_state', u.unpack_one("B"), unpack.format_table("{}", chassis_states)) |
|
self.add_field('thermal_state', u.unpack_one("B"), unpack.format_table("{}", chassis_states)) |
|
security_states = { |
|
0x01: 'Other', |
|
0x02: 'Unknown', |
|
0x03: 'None', |
|
0x04: 'External interface locked out', |
|
0x05: 'External interface enabled', |
|
} |
|
self.add_field('security_status', u.unpack_one("B"), unpack.format_table("{}", security_states)) |
|
if self.length > 0xd: |
|
self.add_field('oem_defined', u.unpack_one("<I")) |
|
if self.length > 0x11: |
|
self.add_field('height', u.unpack_one("B")) |
|
self.add_field('num_power_cords', u.unpack_one("B")) |
|
self.add_field('contained_element_count', u.unpack_one("B")) |
|
self.add_field('contained_element_length', u.unpack_one("B")) |
|
if getattr(self, 'contained_element_count', 0): |
|
self.add_field('contained_elements', tuple(SystemEnclosureContainedElement(u, self.contained_element_length) for i in range(self.contained_element_count))) |
|
if self.length > (0x15 + (getattr(self, 'contained_element_count', 0) * getattr(self, 'contained_element_length', 0))): |
|
self.add_field('sku_number', u.unpack_one("B"), self.fmtstr) |
|
except: |
|
self.decode_failure = True |
|
print "Error parsing SystemEnclosure" |
|
import traceback |
|
traceback.print_exc() |
|
self.fini() |
|
|
|
class SystemEnclosureContainedElement(unpack.Struct): |
|
def __init__(self, u, length): |
|
super(SystemEnclosureContainedElement, self).__init__() |
|
self.start_offset = u.offset |
|
self.raw_data = u.unpack_raw(length) |
|
self.u = unpack.Unpackable(self.raw_data) |
|
u = self.u |
|
self.add_field('contained_element_type', u.unpack_one("B")) |
|
type_selections = { |
|
0: 'SMBIOS baseboard type enumeration', |
|
1: 'SMBIOS structure type enumeration', |
|
} |
|
self.add_field('type_select', bitfields.getbits(self.contained_element_type, 7), unpack.format_table("contained_element_type[7]={}", type_selections)) |
|
self.add_field('type', bitfields.getbits(self.contained_element_type, 6, 0)) |
|
if self.type_select == 0: |
|
self.add_field('smbios_board_type', self.type, unpack.format_table("{}", _board_types)) |
|
else: |
|
self.add_field('smbios_structure_type', self.type) |
|
self.add_field('minimum', u.unpack_one("B")) |
|
self.add_field('maximum', u.unpack_one("B")) |
|
if not u.at_end(): |
|
self.add_field('data', u.unpack_rest()) |
|
del self.u |
|
|
|
class ProcessorInformation(SmbiosBaseStructure): |
|
smbios_structure_type = 4 |
|
|
|
def __init__(self, u, sm): |
|
super(ProcessorInformation, self).__init__(u, sm) |
|
u = self.u |
|
try: |
|
self.add_field('socket_designation', u.unpack_one("B"), self.fmtstr) |
|
processor_types = { |
|
0x01: 'Other', |
|
0x02: 'Unknown', |
|
0x03: 'Central Processor', |
|
0x04: 'Math Processor', |
|
0x05: 'DSP Processor', |
|
0x06: 'Video Processor', |
|
} |
|
self.add_field('processor_type', u.unpack_one("B"), unpack.format_table("{}", processor_types)) |
|
self.add_field('processor_family', u.unpack_one("B")) |
|
self.add_field('processor_manufacturer', u.unpack_one("B"), self.fmtstr) |
|
self.add_field('processor_id', u.unpack_one("<Q")) |
|
self.add_field('processor_version', u.unpack_one("B"), self.fmtstr) |
|
self.add_field('voltage', u.unpack_one("B")) |
|
self.add_field('external_clock', u.unpack_one("<H")) |
|
self.add_field('max_speed', u.unpack_one("<H")) |
|
self.add_field('current_speed', u.unpack_one("<H")) |
|
self.add_field('status', u.unpack_one("B")) |
|
processor_upgrades = { |
|
0x01: 'Other', |
|
0x02: 'Unknown', |
|
0x03: 'Daughter Board', |
|
0x04: 'ZIF Socket', |
|
0x05: 'Replaceable Piggy Back', |
|
0x06: 'None', |
|
0x07: 'LIF Socket', |
|
0x08: 'Slot 1', |
|
0x09: 'Slot 2', |
|
0x0A: '370-pin socket', |
|
0x0B: 'Slot A', |
|
0x0C: 'Slot M', |
|
0x0D: 'Socket 423', |
|
0x0E: 'Socket A (Socket 462)', |
|
0x0F: 'Socket 478', |
|
0x10: 'Socket 754', |
|
0x11: 'Socket 940', |
|
0x12: 'Socket 939', |
|
0x13: 'Socket mPGA604', |
|
0x14: 'Socket LGA771', |
|
0x15: 'Socket LGA775', |
|
0x16: 'Socket S1', |
|
0x17: 'Socket AM2', |
|
0x18: 'Socket F (1207)', |
|
0x19: 'Socket LGA1366', |
|
0x1A: 'Socket G34', |
|
0x1B: 'Socket AM3', |
|
0x1C: 'Socket C32', |
|
0x1D: 'Socket LGA1156', |
|
0x1E: 'Socket LGA1567', |
|
0x1F: 'Socket PGA988A', |
|
0x20: 'Socket BGA1288', |
|
0x21: 'Socket rPGA988B', |
|
0x22: 'Socket BGA1023', |
|
0x23: 'Socket BGA1224', |
|
0x24: 'Socket BGA1155', |
|
0x25: 'Socket LGA1356', |
|
0x26: 'Socket LGA2011', |
|
0x27: 'Socket FS1', |
|
0x28: 'Socket FS2', |
|
0x29: 'Socket FM1', |
|
0x2A: 'Socket FM2', |
|
} |
|
self.add_field('processor_upgrade', u.unpack_one("B"), unpack.format_table("{}", processor_upgrades)) |
|
if self.length > 0x1A: |
|
self.add_field('l1_cache_handle', u.unpack_one("<H")) |
|
self.add_field('l2_cache_handle', u.unpack_one("<H")) |
|
self.add_field('l3_cache_handle', u.unpack_one("<H")) |
|
if self.length > 0x20: |
|
self.add_field('serial_number', u.unpack_one("B"), self.fmtstr) |
|
self.add_field('asset_tag', u.unpack_one("B"), self.fmtstr) |
|
self.add_field('part_number', u.unpack_one("B"), self.fmtstr) |
|
if self.length > 0x24: |
|
self.add_field('core_count', u.unpack_one("B")) |
|
self.add_field('core_enabled', u.unpack_one("B")) |
|
self.add_field('thread_count', u.unpack_one("B")) |
|
self.add_field('processor_characteristics', u.unpack_one("<H")) |
|
if self.length > 0x28: |
|
self.add_field('processor_family_2', u.unpack_one("<H")) |
|
if self.length > 0x2A: |
|
self.add_field('core_count2', u.unpack_one("<H")) |
|
self.add_field('core_enabled2', u.unpack_one("<H")) |
|
self.add_field('thread_count2', u.unpack_one("<H")) |
|
except: |
|
self.decode_failure = True |
|
print "Error parsing Processor Information" |
|
import traceback |
|
traceback.print_exc() |
|
self.fini() |
|
|
|
class MemoryControllerInformation(SmbiosBaseStructure): #obsolete starting with v2.1 |
|
smbios_structure_type = 5 |
|
|
|
def __init__(self, u, sm): |
|
super(MemoryControllerInformation, self).__init__(u, sm) |
|
u = self.u |
|
try: |
|
_error_detecting_method = { |
|
0x01: 'Other', |
|
0x02: 'Unknown', |
|
0x03: 'None', |
|
0x04: '8-bit Parity', |
|
0x05: '32-bit ECC', |
|
0x06: '64-bit ECC', |
|
0x07: '128-bit ECC', |
|
0x08: 'CRC' |
|
} |
|
self.add_field('error_detecting_method', u.unpack_one("B"), unpack.format_table("{}", _error_detecting_method)) |
|
self.add_field('error_correcting_capability', u.unpack_one("B")) |
|
_interleaves = { |
|
0x01: 'Other', |
|
0x02: 'Unknown', |
|
0x03: 'One-Way Interleave', |
|
0x04: 'Two-Way Interleave', |
|
0x05: 'Four-Way Interleave', |
|
0x06: 'Eight-Way Interleave', |
|
0x07: 'Sixteen-Way Interleave' |
|
} |
|
self.add_field('supported_interleave', u.unpack_one("B"), unpack.format_table("{}", _interleaves)) |
|
self.add_field('current_interleave', u.unpack_one("B"), unpack.format_table("{}", _interleaves)) |
|
self.add_field('max_memory_module_size', u.unpack_one("B"), self.fmtstr) |
|
self.add_field('supported_speeds', u.unpack_one("<H")) |
|
self.add_field('supported_memory_types', u.unpack_one("<H")) |
|
self.add_field('memory_module_voltage', u.unpack_one("B")) |
|
self.add_field('req_voltage_b2', bitfields.getbits(self.memory_module_voltage, 2), "memory_module_voltage[2]={}") |
|
self.add_field('req_voltage_b1', bitfields.getbits(self.memory_module_voltage, 1), "memory_module_voltage[1]={}") |
|
self.add_field('req_voltage_b0', bitfields.getbits(self.memory_module_voltage, 0), "memory_module_voltage[0]={}") |
|
self.add_field('num_associated_memory_slots', u.unpack_one("B")) |
|
self.add_field('memory_module_configuration_handles', u.unpack_one("<(self.num_associated_memory_slots)H")) |
|
self.add_field('enabled_error_correcting_capabilities', u.unpack_one("B")) |
|
except: |
|
self.decode_failure = True |
|
print "Error parsing MemoryControllerInformation" |
|
import traceback |
|
traceback.print_exc() |
|
self.fini() |
|
|
|
class MemoryModuleInformation(SmbiosBaseStructure): #obsolete starting with v2.1 |
|
smbios_structure_type = 6 |
|
|
|
def __init__(self, u, sm): |
|
super(MemoryModuleInformation, self).__init__(u, sm) |
|
u = self.u |
|
try: |
|
self.add_field('socket_designation', u.unpack_one("B"), self.fmtstr) |
|
self.add_field('bank_connections', u.unpack_one("B")) |
|
self.add_field('current_speed', u.unpack_one("B")) |
|
self.add_field('current_memory_type', u.unpack_one("<H")) |
|
_mem_connection = { |
|
0: 'single', |
|
1: 'double-bank' |
|
} |
|
self.add_field('installed_mem', u.unpack_one("B")) |
|
self.add_field('installed_size', bitfields.getbits(self.installed_mem, 6, 0), "installed_mem[6:0]={}") |
|
self.add_field('installed_memory_module_connection', bitfields.getbits(self.installed_mem, 7), unpack.format_table("installed_mem[7]={}", _mem_connection)) |
|
self.add_field('enabled_mem', u.unpack_one("B")) |
|
self.add_field('enabled_size', bitfields.getbits(self.installed_mem, 6, 0), "enabled_mem[6:0]={}") |
|
self.add_field('enabled_memory_module_connection', bitfields.getbits(self.installed_mem, 7), unpack.format_table("enabled_mem[7]={}", _mem_connection)) |
|
self.add_field('error_status', u.unpack_one("B")) |
|
self.add_field('error_status_info_obstained_from_event_log', bool(bitfields.getbits(self.error_status, 2)), unpack.format_table("error_status[2]={}", _mem_connection)) |
|
self.add_field('correctable_errors_received', bool(bitfields.getbits(self.error_status, 1)), unpack.format_table("error_status[1]={}", _mem_connection)) |
|
self.add_field('uncorrectable_errors_received', bool(bitfields.getbits(self.error_status, 0)), unpack.format_table("error_status[0]={}", _mem_connection)) |
|
except: |
|
self.decode_failure = True |
|
print "Error parsing MemoryModuleInformation" |
|
import traceback |
|
traceback.print_exc() |
|
self.fini() |
|
|
|
class CacheInformation(SmbiosBaseStructure): |
|
smbios_structure_type = 7 |
|
|
|
def __init__(self, u, sm): |
|
super(CacheInformation, self).__init__(u, sm) |
|
u = self.u |
|
try: |
|
self.add_field('socket_designation', u.unpack_one("B"), self.fmtstr) |
|
processor_types = { |
|
0x01: 'Other', |
|
0x02: 'Unknown', |
|
0x03: 'Central Processor', |
|
0x04: 'Math Processor', |
|
0x05: 'DSP Processor', |
|
0x06: 'Video Processor', |
|
} |
|
self.add_field('cache_configuration', u.unpack_one("<H")) |
|
_operational_mode = { |
|
0b00: 'Write Through', |
|
0b01: 'Write Back', |
|
0b10: 'Varies with Memory Address', |
|
0b11: 'Unknown' |
|
} |
|
self.add_field('operational_mode', bitfields.getbits(self.cache_configuration, 9, 8), unpack.format_table("cache_configuration[9:8]={}", _operational_mode)) |
|
self.add_field('enabled_at_boot_time', bool(bitfields.getbits(self.cache_configuration, 7)), "cache_configuration[7]={}") |
|
_location = { |
|
0b00: 'Internal', |
|
0b01: 'External', |
|
0b10: 'Reserved', |
|
0b11: 'Unknown' |
|
} |
|
self.add_field('location_relative_to_cpu_module', bitfields.getbits(self.cache_configuration, 6, 5), unpack.format_table("cache_configuration[6:5]={}", _location)) |
|
self.add_field('cache_socketed', bool(bitfields.getbits(self.cache_configuration, 3)), "cache_configuration[3]={}") |
|
self.add_field('cache_level', bitfields.getbits(self.cache_configuration, 2, 0), "cache_configuration[2:0]={}") |
|
self.add_field('max_cache_size', u.unpack_one("<H")) |
|
_granularity = { |
|
0: '1K granularity', |
|
1: '64K granularity' |
|
} |
|
self.add_field('max_granularity', bitfields.getbits(self.cache_configuration, 15), unpack.format_table("max_cache_size[15]={}", _granularity)) |
|
self.add_field('max_size_in_granularity', bitfields.getbits(self.cache_configuration, 14, 0), "max_cache_size[14, 0]={}") |
|
self.add_field('installed_size', u.unpack_one("<H")) |
|
if self.installed_size != 0: |
|
self.add_field('installed_granularity', bitfields.getbits(self.cache_configuration, 15), unpack.format_table("installed_size[15]={}", _granularity)) |
|
self.add_field('installed_size_in_granularity', bitfields.getbits(self.cache_configuration, 14, 0), "installed_size[14, 0]={}") |
|
self.add_field('supported_sram_type', u.unpack_one("<H")) |
|
self.add_field('current_sram_type', u.unpack_one("<H")) |
|
if self.length > 0x0F: |
|
self.add_field('cache_speed', u.unpack_one("B")) |
|
if self.length > 0x10: |
|
_error_correction = { |
|
0x01: 'Other', |
|
0x02: 'Unknown', |
|
0x03: 'None', |
|
0x04: 'Parity', |
|
0x05: 'Single-bit ECC', |
|
0x06: 'Multi-bit ECC' |
|
} |
|
self.add_field('error_correction', u.unpack_one("B"), unpack.format_table("{}", _error_correction)) |
|
if self.length > 0x10: |
|
_system_cache_type = { |
|
0x01: 'Other', |
|
0x02: 'Unknown', |
|
0x03: 'Instruction', |
|
0x04: 'Data', |
|
0x05: 'Unified' |
|
} |
|
self.add_field('system_cache_type', u.unpack_one("B"), unpack.format_table("{}", _system_cache_type)) |
|
if self.length > 0x12: |
|
_associativity = { |
|
0x01: 'Other', |
|
0x02: 'Unknown', |
|
0x03: 'Direct Mapped', |
|
0x04: '2-way Set-Associative', |
|
0x05: '4-way Set-Associative', |
|
0x06: 'Fully Associative', |
|
0x07: '8-way Set-Associative', |
|
0x08: '16-way Set-Associative', |
|
0x09: '12-way Set-Associative', |
|
0x0A: '24-way Set-Associative', |
|
0x0B: '32-way Set-Associative', |
|
0x0C: '48-way Set-Associative', |
|
0x0D: '64-way Set-Associative', |
|
0x0E: '20-way Set-Associative' |
|
} |
|
self.add_field('associativity', u.unpack_one("B"), unpack.format_table("{}", _associativity)) |
|
|
|
except: |
|
self.decode_failure = True |
|
print "Error parsing CacheInformation" |
|
import traceback |
|
traceback.print_exc() |
|
self.fini() |
|
|
|
class PortConnectorInfo(SmbiosBaseStructure): |
|
smbios_structure_type = 8 |
|
|
|
def __init__(self, u, sm): |
|
super(PortConnectorInfo, self).__init__(u, sm) |
|
u = self.u |
|
try: |
|
self.add_field('internal_reference_designator', u.unpack_one("B"), self.fmtstr) |
|
connector_types = { |
|
0x00: 'None', |
|
0x01: 'Centronics', |
|
0x02: 'Mini Centronics', |
|
0x03: 'Proprietary', |
|
0x04: 'DB-25 pin male', |
|
0x05: 'DB-25 pin female', |
|
0x06: 'DB-15 pin male', |
|
0x07: 'DB-15 pin female', |
|
0x08: 'DB-9 pin male', |
|
0x09: 'DB-9 pin female', |
|
0x0A: 'RJ-11', |
|
0x0B: 'RJ-45', |
|
0x0C: '50-pin MiniSCSI', |
|
0x0D: 'Mini-DIN', |
|
0x0E: 'Micro-DIN', |
|
0x0F: 'PS/2', |
|
0x10: 'Infrared', |
|
0x11: 'HP-HIL', |
|
0x12: 'Access Bus (USB)', |
|
0x13: 'SSA SCSI', |
|
0x14: 'Circular DIN-8 male', |
|
0x15: 'Circular DIN-8 female', |
|
0x16: 'On Board IDE', |
|
0x17: 'On Board Floppy', |
|
0x18: '9-pin Dual Inline (pin 10 cut)', |
|
0x19: '25-pin Dual Inline (pin 26 cut)', |
|
0x1A: '50-pin Dual Inline', |
|
0x1B: '68-pin Dual Inline', |
|
0x1C: 'On Board Sound Input from CD-ROM', |
|
0x1D: 'Mini-Centronics Type-14', |
|
0x1E: 'Mini-Centronics Type-26', |
|
0x1F: 'Mini-jack (headphones)', |
|
0x20: 'BNC', |
|
0x21: '1394', |
|
0x22: 'SAS/SATA Plug Receptacle', |
|
0xA0: 'PC-98', |
|
0xA1: 'PC-98Hireso', |
|
0xA2: 'PC-H98', |
|
0xA3: 'PC-98Note', |
|
0xA4: 'PC-98Full', |
|
0xFF: 'Other', |
|
} |
|
self.add_field('internal_connector_type', u.unpack_one("B"), unpack.format_table("{}", connector_types)) |
|
self.add_field('external_reference_designator', u.unpack_one("B"), self.fmtstr) |
|
self.add_field('external_connector_type', u.unpack_one("B"), unpack.format_table("{}", connector_types)) |
|
port_types = { |
|
0x00: 'None', |
|
0x01: 'Parallel Port XT/AT Compatible', |
|
0x02: 'Parallel Port PS/2', |
|
0x03: 'Parallel Port ECP', |
|
0x04: 'Parallel Port EPP', |
|
0x05: 'Parallel Port ECP/EPP', |
|
0x06: 'Serial Port XT/AT Compatible', |
|
0x07: 'Serial Port 16450 Compatible', |
|
0x08: 'Serial Port 16550 Compatible', |
|
0x09: 'Serial Port 16550A Compatible', |
|
0x0A: 'SCSI Port', |
|
0x0B: 'MIDI Port', |
|
0x0C: 'Joy Stick Port', |
|
0x0D: 'Keyboard Port', |
|
0x0E: 'Mouse Port', |
|
0x0F: 'SSA SCSI', |
|
0x10: 'USB', |
|
0x11: 'FireWire (IEEE P1394)', |
|
0x12: 'PCMCIA Type I2', |
|
0x13: 'PCMCIA Type II', |
|
0x14: 'PCMCIA Type III', |
|
0x15: 'Cardbus', |
|
0x16: 'Access Bus Port', |
|
0x17: 'SCSI II', |
|
0x18: 'SCSI Wide', |
|
0x19: 'PC-98', |
|
0x1A: 'PC-98-Hireso', |
|
0x1B: 'PC-H98', |
|
0x1C: 'Video Port', |
|
0x1D: 'Audio Port', |
|
0x1E: 'Modem Port', |
|
0x1F: 'Network Port', |
|
0x20: 'SATA', |
|
0x21: 'SAS', |
|
0xA0: '8251 Compatible', |
|
0xA1: '8251 FIFO Compatible', |
|
0xFF: 'Other', |
|
} |
|
self.add_field('port_type', u.unpack_one("B"), unpack.format_table("{}", port_types)) |
|
except: |
|
self.decodeFailure = True |
|
print "Error parsing PortConnectorInfo" |
|
import traceback |
|
traceback.print_exc() |
|
self.fini() |
|
|
|
class SystemSlots(SmbiosBaseStructure): |
|
smbios_structure_type = 9 |
|
|
|
def __init__(self, u, sm): |
|
super(SystemSlots, self).__init__(u, sm) |
|
u = self.u |
|
try: |
|
self.add_field('designation', u.unpack_one("B"), self.fmtstr) |
|
_slot_types = { |
|
0x01: 'Other', |
|
0x02: 'Unknown', |
|
0x03: 'ISA', |
|
0x04: 'MCA', |
|
0x05: 'EISA', |
|
0x06: 'PCI', |
|
0x07: 'PC Card (PCMCIA)', |
|
0x08: 'VL-VESA', |
|
0x09: 'Proprietary', |
|
0x0A: 'Processor Card Slot', |
|
0x0B: 'Proprietary Memory Card Slot', |
|
0x0C: 'I/O Riser Card Slot', |
|
0x0D: 'NuBus', |
|
0x0E: 'PCI 66MHz Capable', |
|
0x0F: 'AGP', |
|
0x10: 'AGP 2X', |
|
0x11: 'AGP 4X', |
|
0x12: 'PCI-X', |
|
0x13: 'AGP 8X', |
|
0xA0: 'PC-98/C20', |
|
0xA1: 'PC-98/C24', |
|
0xA2: 'PC-98/E', |
|
0xA3: 'PC-98/Local Bus', |
|
0xA4: 'PC-98/Card', |
|
0xA5: 'PCI Express', |
|
0xA6: 'PCI Express x1', |
|
0xA7: 'PCI Express x2', |
|
0xA8: 'PCI Express x4', |
|
0xA9: 'PCI Express x8', |
|
0xAA: 'PCI Express x16', |
|
0xAB: 'PCI Express Gen 2', |
|
0xAC: 'PCI Express Gen 2 x1', |
|
0xAD: 'PCI Express Gen 2 x2', |
|
0xAE: 'PCI Express Gen 2 x4', |
|
0xAF: 'PCI Express Gen 2 x8', |
|
0xB0: 'PCI Express Gen 2 x16', |
|
0xB1: 'PCI Express Gen 3', |
|
0xB2: 'PCI Express Gen 3 x1', |
|
0xB3: 'PCI Express Gen 3 x2', |
|
0xB4: 'PCI Express Gen 3 x4', |
|
0xB5: 'PCI Express Gen 3 x8', |
|
0xB6: 'PCI Express Gen 3 x16', |
|
} |
|
self.add_field('slot_type', u.unpack_one("B"), unpack.format_table("{}", _slot_types)) |
|
_slot_data_bus_widths = { |
|
0x01: 'Other', |
|
0x02: 'Unknown', |
|
0x03: '8 bit', |
|
0x04: '16 bit', |
|
0x05: '32 bit', |
|
0x06: '64 bit', |
|
0x07: '128 bit', |
|
0x08: '1x or x1', |
|
0x09: '2x or x2', |
|
0x0A: '4x or x4', |
|
0x0B: '8x or x8', |
|
0x0C: '12x or x12', |
|
0x0D: '16x or x16', |
|
0x0E: '32x or x32', |
|
} |
|
self.add_field('slot_data_bus_width', u.unpack_one('B'), unpack.format_table("{}", _slot_data_bus_widths)) |
|
_current_usages = { |
|
0x01: 'Other', |
|
0x02: 'Unknown', |
|
0x03: 'Available', |
|
0x04: 'In use', |
|
} |
|
self.add_field('current_usage', u.unpack_one('B'), unpack.format_table("{}", _current_usages)) |
|
_slot_lengths = { |
|
0x01: 'Other', |
|
0x02: 'Unknown', |
|
0x03: 'Short Length', |
|
0x04: 'Long Length', |
|
} |
|
self.add_field('slot_length', u.unpack_one('B'), unpack.format_table("{}", _slot_lengths)) |
|
self.add_field('slot_id', u.unpack_one('<H')) |
|
self.add_field('characteristics1', u.unpack_one('B')) |
|
self.add_field('characteristics_unknown', bool(bitfields.getbits(self.characteristics1, 0)), "characteristics1[0]={}") |
|
self.add_field('provides_5_0_volts', bool(bitfields.getbits(self.characteristics1, 1)), "characteristics1[1]={}") |
|
self.add_field('provides_3_3_volts', bool(bitfields.getbits(self.characteristics1, 2)), "characteristics1[2]={}") |
|
self.add_field('shared_slot', bool(bitfields.getbits(self.characteristics1, 3)), "characteristics1[3]={}") |
|
self.add_field('supports_pc_card_16', bool(bitfields.getbits(self.characteristics1, 4)), "characteristics1[4]={}") |
|
self.add_field('supports_cardbus', bool(bitfields.getbits(self.characteristics1, 5)), "characteristics1[5]={}") |
|
self.add_field('supports_zoom_video', bool(bitfields.getbits(self.characteristics1, 6)), "characteristics1[6]={}") |
|
self.add_field('supports_modem_ring_resume', bool(bitfields.getbits(self.characteristics1, 7)), "characteristics1[7]={}") |
|
if self.length > 0x0C: |
|
self.add_field('characteristics2', u.unpack_one('B')) |
|
self.add_field('supports_PME', bool(bitfields.getbits(self.characteristics2, 0)), "characteristics2[0]={}") |
|
self.add_field('supports_hot_plug', bool(bitfields.getbits(self.characteristics2, 1)), "characteristics2[1]={}") |
|
self.add_field('supports_smbus', bool(bitfields.getbits(self.characteristics2, 2)), "characteristics2[2]={}") |
|
if self.length > 0x0D: |
|
self.add_field('segment_group_number', u.unpack_one('<H')) |
|
self.add_field('bus_number', u.unpack_one('B')) |
|
self.add_field('device_function_number', u.unpack_one('B')) |
|
self.add_field('device_number', bitfields.getbits(self.device_function_number, 7, 3), "device_function_number[7:3]={}") |
|
self.add_field('function_number', bitfields.getbits(self.device_function_number, 2, 0), "device_function_number[2:0]={}") |
|
except: |
|
self.decodeFailure = True |
|
print "Error parsing SystemSlots" |
|
import traceback |
|
traceback.print_exc() |
|
self.fini() |
|
|
|
class OnBoardDevicesInformation(SmbiosBaseStructure): |
|
smbios_structure_type = 10 |
|
|
|
def __init__(self, u, sm): |
|
super(OnBoardDevicesInformation, self).__init__(u, sm) |
|
u = self.u |
|
try: |
|
self.add_field('device_type', u.unpack_one("B")) |
|
self.add_field('device_enabled', bool(bitfields.getbits(self.device_type, 7)), "device_type[7]={}") |
|
_device_types = { |
|
0x01: 'Other', |
|
0x02: 'Unknown', |
|
0x03: 'Video', |
|
0x04: 'SCSI Controller', |
|
0x05: 'Ethernet', |
|
0x06: 'Token Ring', |
|
0x07: 'Sound', |
|
0x08: 'PATA Controller', |
|
0x09: 'SATA Controller', |
|
0x0A: 'SAS Controller' |
|
} |
|
self.add_field('type_of_device', bitfields.getbits(self.device_type, 6, 0), unpack.format_table("device_type[6:0]={}", _device_types)) |
|
self.add_field('description_string', u.unpack_one("B"), self.fmtstr) |
|
except: |
|
self.decodeFailure = True |
|
print "Error parsing OnBoardDevicesInformation" |
|
import traceback |
|
traceback.print_exc() |
|
self.fini() |
|
|
|
class OEMStrings(SmbiosBaseStructure): |
|
smbios_structure_type = 11 |
|
|
|
def __init__(self, u, sm): |
|
super(OEMStrings, self).__init__(u, sm) |
|
u = self.u |
|
try: |
|
self.add_field('count', u.unpack_one("B")) |
|
except: |
|
self.decodeFailure = True |
|
print "Error parsing OEMStrings" |
|
import traceback |
|
traceback.print_exc() |
|
self.fini() |
|
|
|
class SystemConfigOptions(SmbiosBaseStructure): |
|
smbios_structure_type = 12 |
|
|
|
def __init__(self, u, sm): |
|
super(SystemConfigOptions, self).__init__(u, sm) |
|
u = self.u |
|
try: |
|
self.add_field('count', u.unpack_one("B")) |
|
except: |
|
self.decodeFailure = True |
|
print "Error parsing SystemConfigOptions" |
|
import traceback |
|
traceback.print_exc() |
|
self.fini() |
|
|
|
class BIOSLanguageInformation(SmbiosBaseStructure): |
|
smbios_structure_type = 13 |
|
|
|
def __init__(self, u, sm): |
|
super(BIOSLanguageInformation, self).__init__(u, sm) |
|
u = self.u |
|
try: |
|
self.add_field('installable_languages', u.unpack_one("B")) |
|
if self.length > 0x05: |
|
self.add_field('flags', u.unpack_one('B')) |
|
self.add_field('abbreviated_format', bool(bitfields.getbits(self.flags, 0)), "flags[0]={}") |
|
if self.length > 0x6: |
|
u.skip(15) |
|
self.add_field('current_language', u.unpack_one('B'), self.fmtstr) |
|
except: |
|
self.decodeFailure = True |
|
print "Error parsing BIOSLanguageInformation" |
|
import traceback |
|
traceback.print_exc() |
|
self.fini() |
|
|
|
class GroupAssociations(SmbiosBaseStructure): |
|
smbios_structure_type = 14 |
|
|
|
def __init__(self, u, sm): |
|
super(GroupAssociations, self).__init__(u, sm) |
|
u = self.u |
|
try: |
|
self.add_field('group_name', u.unpack_one("B"), self.fmtstr) |
|
self.add_field('item_type', u.unpack_one('B')) |
|
self.add_field('item_handle', u.unpack_one('<H')) |
|
except: |
|
self.decodeFailure = True |
|
print "Error parsing GroupAssociations" |
|
import traceback |
|
traceback.print_exc() |
|
self.fini() |
|
|
|
class SystemEventLog(SmbiosBaseStructure): |
|
smbios_structure_type = 15 |
|
|
|
def __init__(self, u, sm): |
|
super(SystemEventLog, self).__init__(u, sm) |
|
u = self.u |
|
try: |
|
self.add_field('log_area_length', u.unpack_one("<H")) |
|
self.add_field('log_header_start_offset', u.unpack_one('<H')) |
|
self.add_field('log_data_start_offset', u.unpack_one('<H')) |
|
_access_method = { |
|
0x00: 'Indexed I/O: 1 8-bit index port, 1 8-bit data port', |
|
0x01: 'Indexed I/O: 2 8-bit index ports, 1 8-bit data port', |
|
0x02: 'Indexed I/O: 1 16-bit index port, 1 8-bit data port', |
|
0x03: 'Memory-mapped physical 32-bit address', |
|
0x04: 'Available through General-Purpose NonVolatile Data functions', |
|
xrange(0x05, 0x07F): 'Available for future assignment', |
|
xrange(0x80, 0xFF): 'BIOS Vendor/OEM-specific' |
|
} |
|
self.add_field('access_method', u.unpack_one('B'), unpack.format_table("{}", _access_method)) |
|
self.add_field('log_status', u.unpack_one('B')) |
|
self.add_field('log_area_full', bool(bitfields.getbits(self.log_status, 1)), "log_status[1]={}") |
|
self.add_field('log_area_valid', bool(bitfields.getbits(self.log_status, 0)), "log_status[0]={}") |
|
self.add_field('log_change_token', u.unpack_one('<I')) |
|
self.add_field('access_method_address', u.unpack_one('<I')) |
|
if self.length > 0x14: |
|
_log_header_formats = { |
|
0: 'No header', |
|
1: 'Type 1 log header', |
|
xrange(2, 0x7f): 'Available for future assignment', |
|
xrange(0x80, 0xff): 'BIOS vendor or OEM-specific format' |
|
} |
|
self.add_field('log_header_format', u.unpack_one("B"), unpack.format_table("{}", _log_header_formats)) |
|
if self.length > 0x15: |
|
self.add_field('num_supported_log_type_descriptors', u.unpack_one('B')) |
|
if self.length > 0x16: |
|
self.add_field('length_log_type_descriptor', u.unpack_one('B')) |
|
if self.length != (0x17 + (self.num_supported_log_type_descriptors * self.length_log_type_descriptor)): |
|
print "Error: structure length ({}) != 0x17 + (num_supported_log_type_descriptors ({}) * length_log_type_descriptor({}))".format(self.length, self.num_supported_log_type_descriptors, self.length_log_type_descriptor) |
|
print "structure length = {}".format(self.length) |
|
print "num_supported_log_type_descriptors = {}".format(self.num_supported_log_type_descriptors) |
|
print "length_log_type_descriptor = {}".format(self.length_log_type_descriptor) |
|
self.decodeFailure = True |
|
self.add_field('descriptors', tuple(EventLogDescriptor.unpack(u) for i in range(self.num_supported_log_type_descriptors)), unpack.format_each("\n{!r}")) |
|
except: |
|
self.decodeFailure = True |
|
print "Error parsing SystemEventLog" |
|
import traceback |
|
traceback.print_exc() |
|
self.fini() |
|
|
|
class EventLogDescriptor(unpack.Struct): |
|
@staticmethod |
|
def _unpack(u): |
|
_event_log_type_descriptors = { |
|
0x00: 'Reserved', |
|
0x01: 'Single-bit ECC memory error', |
|
0x02: 'Multi-bit ECC memory error', |
|
0x03: 'Parity memory error', |
|
0x04: 'Bus time-out', |
|
0x05: 'I/O Channel Check', |
|
0x06: 'Software NMI', |
|
0x07: 'POST Memory Resize', |
|
0x08: 'POST Error', |
|
0x09: 'PCI Parity Error', |
|
0x0A: 'PCI System Error', |
|
0x0B: 'CPU Failure', |
|
0x0C: 'EISA FailSafe Timer time-out', |
|
0x0D: 'Correctable memory log disabled', |
|
0x0E: 'Logging disabled for a specific Event Type - too many errors of the same type received in a short amount of time', |
|
0x0F: 'Reserved', |
|
0x10: 'System Limit Exceeded', |
|
0x11: 'Asynchronous hardware timer expired and issued a system reset', |
|
0x12: 'System configuration information', |
|
0x13: 'Hard-disk information', |
|
0x14: 'System reconfigured', |
|
0x15: 'Uncorrectable CPU-complex error', |
|
0x16: 'Log Area Reset/Cleared', |
|
0x17: 'System boot', |
|
xrange(0x18, 0x7F): 'Unused, available for assignment', |
|
xrange(0x80, 0xFE): 'Available for system- and OEM-specific assignments', |
|
0xFF: 'End of log' |
|
} |
|
yield 'log_type', u.unpack_one('B'), unpack.format_table("{}", _event_log_type_descriptors) |
|
_event_log_format = { |
|
0x00: 'None', |
|
0x01: 'Handle', |
|
0x02: 'Multiple-Event', |
|
0x03: 'Multiple-Event Handle', |
|
0x04: 'POST Results Bitmap', |
|
0x05: 'System Management Type', |
|
0x06: 'Multiple-Event System Management Type', |
|
xrange(0x80, 0xFF): 'OEM assigned' |
|
} |
|
yield 'variable_data_format_type', u.unpack_one('B'), unpack.format_table("{}", _event_log_format) |
|
|
|
class PhysicalMemoryArray(SmbiosBaseStructure): |
|
smbios_structure_type = 16 |
|
|
|
def __init__(self, u, sm): |
|
super(PhysicalMemoryArray, self).__init__(u, sm) |
|
u = self.u |
|
try: |
|
if self.length > 0x4: |
|
_location_field = { |
|
0x01: "Other", |
|
0x02: "Unknown", |
|
0x03: "System board or motherboard", |
|
0x04: "ISA add-on card", |
|
0x05: "EISA add-on card", |
|
0x06: "PCI add-on card", |
|
0x07: "MCA add-on card", |
|
0x08: "PCMCIA add-on card", |
|
0x09: "Proprietary add-on card", |
|
0x0A: "NuBus", |
|
0xA0: "PC-98/C20 add-on card", |
|
0xA1: "PC-98/C24 add-on card", |
|
0xA2: "PC-98/E add-on card", |
|
0xA3: "PC-98/Local bus add-on card" |
|
} |
|
self.add_field('location', u.unpack_one("B"), unpack.format_table("{}", _location_field)) |
|
if self.length > 0x05: |
|
_use = { |
|
0x01: "Other", |
|
0x02: "Unknown", |
|
0x03: "System memory", |
|
0x04: "Video memory", |
|
0x05: "Flash memory", |
|
0x06: "Non-volatile RAM", |
|
0x07: "Cache memory" |
|
} |
|
self.add_field('use', u.unpack_one('B'), unpack.format_table("{}", _use)) |
|
if self.length > 0x06: |
|
_error_correction = { |
|
0x01: "Other", |
|
0x02: "Unknown", |
|
0x03: "None", |
|
0x04: "Parity", |
|
0x05: "Single-bit ECC", |
|
0x06: "Multi-bit ECC", |
|
0x07: "CRC" |
|
} |
|
self.add_field('memory_error_correction', u.unpack_one('B'), unpack.format_table("{}", _error_correction)) |
|
if self.length > 0x07: |
|
self.add_field('maximum_capacity', u.unpack_one('<I')) |
|
if self.length > 0x0B: |
|
self.add_field('memory_error_information_handle', u.unpack_one('<H')) |
|
if self.length > 0x0D: |
|
self.add_field('num_memory_devices', u.unpack_one('<H')) |
|
if self.length > 0x0F: |
|
self.add_field('extended_maximum_capacity', u.unpack_one('<Q')) |
|
except: |
|
self.decodeFailure = True |
|
print "Error parsing PhysicalMemoryArray" |
|
import traceback |
|
traceback.print_exc() |
|
self.fini() |
|
|
|
class MemoryDevice(SmbiosBaseStructure): |
|
smbios_structure_type = 17 |
|
|
|
def __init__(self, u, sm): |
|
super(MemoryDevice, self).__init__(u, sm) |
|
u = self.u |
|
try: |
|
if self.length > 0x4: |
|
self.add_field('physical_memory_array_handle', u.unpack_one("<H")) |
|
if self.length > 0x6: |
|
self.add_field('memory_error_information_handle', u.unpack_one("<H")) |
|
if self.length > 0x8: |
|
self.add_field('total_width', u.unpack_one("<H")) |
|
if self.length > 0xA: |
|
self.add_field('data_width', u.unpack_one("<H")) |
|
if self.length > 0xC: |
|
self.add_field('size', u.unpack_one("<H")) |
|
if self.length > 0xE: |
|
_form_factors = { |
|
0x01: 'Other', |
|
0x02: 'Unknown', |
|
0x03: 'SIMM', |
|
0x04: 'SIP', |
|
0x05: 'Chip', |
|
0x06: 'DIP', |
|
0x07: 'ZIP', |
|
0x08: 'Proprietary Card', |
|
0x09: 'DIMM', |
|
0x0A: 'TSOP', |
|
0x0B: 'Row of chips', |
|
0x0C: 'RIMM', |
|
0x0D: 'SODIMM', |
|
0x0E: 'SRIMM', |
|
0x0F: 'FB-DIMM' |
|
} |
|
self.add_field('form_factor', u.unpack_one("B"), unpack.format_table("{}", _form_factors)) |
|
if self.length > 0xF: |
|
self.add_field('device_set', u.unpack_one("B")) |
|
if self.length > 0x10: |
|
self.add_field('device_locator', u.unpack_one("B"), self.fmtstr) |
|
if self.length > 0x11: |
|
self.add_field('bank_locator', u.unpack_one("B"), self.fmtstr) |
|
if self.length > 0x12: |
|
_memory_types = { |
|
0x01: 'Other', |
|
0x02: 'Unknown', |
|
0x03: 'DRAM', |
|
0x04: 'EDRAM', |
|
0x05: 'VRAM', |
|
0x06: 'SRAM', |
|
0x07: 'RAM', |
|
0x08: 'ROM', |
|
0x09: 'FLASH', |
|
0x0A: 'EEPROM', |
|
0x0B: 'FEPROM', |
|
0x0C: 'EPROM', |
|
0x0D: 'CDRAM', |
|
0x0E: '3DRAM', |
|
0x0F: 'SDRAM', |
|
0x10: 'SGRAM', |
|
0x11: 'RDRAM', |
|
0x12: 'DDR', |
|
0x13: 'DDR2', |
|
0x14: 'DDR2 FB-DIMM', |
|
xrange(0x15, 0x17): 'Reserved', |
|
0x18: 'DDR3', |
|
0x19: 'FBD2' |
|
} |
|
self.add_field('memory_type', u.unpack_one("B"), unpack.format_table("{}", _memory_types)) |
|
if self.length > 0x13: |
|
self.add_field('type_detail', u.unpack_one('<H')) |
|
if self.length > 0x15: |
|
self.add_field('speed', u.unpack_one("<H")) |
|
if self.length > 0x17: |
|
self.add_field('manufacturer', u.unpack_one("B"), self.fmtstr) |
|
if self.length > 0x18: |
|
self.add_field('serial_number', u.unpack_one("B"), self.fmtstr) |
|
if self.length > 0x19: |
|
self.add_field('asset_tag', u.unpack_one("B"), self.fmtstr) |
|
if self.length > 0x1A: |
|
self.add_field('part_number', u.unpack_one("B"), self.fmtstr) |
|
if self.length > 0x1B: |
|
self.add_field('attributes', u.unpack_one("B")) |
|
self.add_field('rank', bitfields.getbits(self.attributes, 3, 0), "attributes[3:0]={}") |
|
if self.length > 0x1C: |
|
if self.size == 0x7FFF: |
|
self.add_field('extended_size', u.unpack_one('<I')) |
|
self.add_field('mem_size', bitfields.getbits(self.type_detail, 30, 0), "type_detail[30:0]={}") |
|
else: |
|
u.skip(4) |
|
if self.length > 0x20: |
|
self.add_field('configured_memory_clock_speed', u.unpack_one("<H")) |
|
if self.length > 0x22: |
|
self.add_field('minimum_voltage', u.unpack_one("<H")) |
|
if self.length > 0x24: |
|
self.add_field('maximum_voltage', u.unpack_one("<H")) |
|
if self.length > 0x26: |
|
self.add_field('configured_voltage', u.unpack_one("<H")) |
|
except: |
|
self.decodeFailure = True |
|
print "Error parsing MemoryDevice" |
|
import traceback |
|
traceback.print_exc() |
|
self.fini() |
|
|
|
class MemoryErrorInfo32Bit(SmbiosBaseStructure): |
|
smbios_structure_type = 18 |
|
|
|
def __init__(self, u, sm): |
|
super(MemoryErrorInfo32Bit, self).__init__(u, sm) |
|
u = self.u |
|
try: |
|
if self.length > 0x4: |
|
_error_types = { |
|
0x01: 'Other', |
|
0x02: 'Unknown', |
|
0x03: 'OK', |
|
0x04: 'Bad read', |
|
0x05: 'Parity error', |
|
0x06: 'Single-bit error', |
|
0x07: 'Double-bit error', |
|
0x08: 'Multi-bit error', |
|
0x09: 'Nibble error', |
|
0x0A: 'Checksum error', |
|
0x0B: 'CRC error', |
|
0x0C: 'Corrected single-bit error', |
|
0x0D: 'Corrected error', |
|
0x0E: 'Uncorrectable error' |
|
} |
|
self.add_field('error_type', u.unpack_one("B"), unpack.format_table("{}", _error_types)) |
|
if self.length > 0x5: |
|
_error_granularity_field = { |
|
0x01: 'Other', |
|
0x02: 'Unknown', |
|
0x03: 'Device level', |
|
0x04: 'Memory partition level' |
|
} |
|
self.add_field('error_granularity', u.unpack_one("B"), unpack.format_table("{}", _error_granularity_field)) |
|
if self.length > 0x6: |
|
_error_operation_field = { |
|
0x01: 'Other', |
|
0x02: 'Unknown', |
|
0x03: 'Read', |
|
0x04: 'Write', |
|
0x05: 'Partial write' |
|
} |
|
self.add_field('error_operation', u.unpack_one("B"), unpack.format_table("{}", _error_operation_field)) |
|
if self.length > 0x7: |
|
self.add_field('vendor_syndrome', u.unpack_one("<I")) |
|
if self.length > 0xB: |
|
self.add_field('memory_array_error_address', u.unpack_one("<I")) |
|
if self.length > 0xF: |
|
self.add_field('device_error_address', u.unpack_one("<I")) |
|
if self.length > 0x13: |
|
self.add_field('error_resolution', u.unpack_one("<I")) |
|
except: |
|
self.decodeFailure = True |
|
print "Error parsing MemoryErrorInfo32Bit" |
|
import traceback |
|
traceback.print_exc() |
|
self.fini() |
|
|
|
class MemoryArrayMappedAddress(SmbiosBaseStructure): |
|
smbios_structure_type = 19 |
|
|
|
def __init__(self, u, sm): |
|
super(MemoryArrayMappedAddress, self).__init__(u, sm) |
|
u = self.u |
|
try: |
|
if self.length > 0x4: |
|
self.add_field('starting_address', u.unpack_one("<I")) |
|
# if FFFF FFFF: address stored in Extended Starting Address |
|
if self.length > 0x8: |
|
self.add_field('ending_address', u.unpack_one("<I")) |
|
if self.length > 0xC: |
|
self.add_field('memory_array_handle', u.unpack_one("<H")) |
|
if self.length > 0xE: |
|
self.add_field('partition_width', u.unpack_one("B")) |
|
if self.length > 0xF: |
|
# valid if starting_address = FFFF FFFF |
|
if self.starting_address == 0xFFFFFFFF: |
|
self.add_field('extended_starting_address', u.unpack_one("<Q")) |
|
if self.length > 0x17: |
|
self.add_field('extended_ending_address', u.unpack_one("<Q")) |
|
else: |
|
u.skip(16) |
|
|
|
except: |
|
self.decodeFailure = True |
|
print "Error parsing MemoryArrayMappedAddress" |
|
import traceback |
|
traceback.print_exc() |
|
self.fini() |
|
|
|
class MemoryDeviceMappedAddress(SmbiosBaseStructure): |
|
smbios_structure_type = 20 |
|
|
|
def __init__(self, u, sm): |
|
super(MemoryDeviceMappedAddress, self).__init__(u, sm) |
|
u = self.u |
|
try: |
|
if self.length > 0x4: |
|
self.add_field('starting_address', u.unpack_one("<I")) |
|
# if FFFF FFFF: address stored in Extended Starting Address |
|
if self.length > 0x8: |
|
self.add_field('ending_address', u.unpack_one("<I")) |
|
if self.length > 0xC: |
|
self.add_field('memory_device_handle', u.unpack_one("<H")) |
|
if self.length > 0xE: |
|
self.add_field('memory_array_mapped_address_handle', u.unpack_one("<H")) |
|
if self.length > 0x10: |
|
self.add_field('partition_row_position', u.unpack_one("B")) |
|
if self.length > 0x11: |
|
self.add_field('interleave_position', u.unpack_one("B")) |
|
if self.length > 0x12: |
|
self.add_field('interleave_data_depth', u.unpack_one("B")) |
|
if self.length > 0x13: |
|
# valid if starting_address = FFFF FFFF |
|
if self.starting_address == 0xFFFFFFFF: |
|
self.add_field('extended_starting_address', u.unpack_one("<Q")) |
|
if self.length > 0x1B: |
|
self.add_field('extended_ending_address', u.unpack_one("<Q")) |
|
else: |
|
u.skip(16) |
|
except: |
|
self.decodeFailure = True |
|
print "Error parsing MemoryDeviceMappedAddress" |
|
import traceback |
|
traceback.print_exc() |
|
self.fini() |
|
|
|
class BuiltInPointingDevice(SmbiosBaseStructure): |
|
smbios_structure_type = 21 |
|
|
|
def __init__(self, u, sm): |
|
super(BuiltInPointingDevice, self).__init__(u, sm) |
|
u = self.u |
|
try: |
|
if self.length > 0x4: |
|
_pointing_device_types = { |
|
0x01: 'Other', |
|
0x02: 'Unknown', |
|
0x03: 'Mouse', |
|
0x04: 'Track Ball', |
|
0x05: 'Track Point', |
|
0x06: 'Glide Point', |
|
0x07: 'Touch Pad', |
|
0x08: 'Touch Screen', |
|
0x09: 'Optical Sensor' |
|
} |
|
self.add_field('pointing_device_type', u.unpack_one("B"), unpack.format_table("{}", _pointing_device_types)) |
|
if self.length > 0x5: |
|
_interfaces = { |
|
0x01: 'Other', |
|
0x02: 'Unknown', |
|
0x03: 'Serial', |
|
0x04: 'PS/2', |
|
0x05: 'Infared', |
|
0x06: 'HP-HIL', |
|
0x07: 'Bus mouse', |
|
0x08: 'ADB (Apple Desktop Bus)', |
|
0x09: 'Bus mouse DB-9', |
|
0x0A: 'Bus mouse micro-DIN', |
|
0x0B: 'USB' |
|
} |
|
self.add_field('interface', u.unpack_one("B"), unpack.format_table("{}", _interfaces)) |
|
if self.length > 0x6: |
|
self.add_field('num_buttons', u.unpack_one("B")) |
|
except: |
|
self.decodeFailure = True |
|
print "Error parsing BuiltInPointingDevice" |
|
import traceback |
|
traceback.print_exc() |
|
self.fini() |
|
|
|
class PortableBattery(SmbiosBaseStructure): |
|
smbios_structure_type = 22 |
|
|
|
def __init__(self, u, sm): |
|
super(PortableBattery, self).__init__(u, sm) |
|
u = self.u |
|
try: |
|
if self.length > 0x4: |
|
self.add_field('location', u.unpack_one("B"), self.fmtstr) |
|
if self.length > 0x5: |
|
self.add_field('manufacturer', u.unpack_one("B"), self.fmtstr) |
|
if self.length > 0x6: |
|
self.add_field('manufacturer_date', u.unpack_one("B"), self.fmtstr) |
|
if self.length > 0x7: |
|
self.add_field('serial_number', u.unpack_one("B"), self.fmtstr) |
|
if self.length > 0x8: |
|
self.add_field('device_name', u.unpack_one("B"), self.fmtstr) |
|
if self.length > 0x9: |
|
_device_chemistry = { |
|
0x01: 'Other', |
|
0x02: 'Unknown', |
|
0x03: 'Lead Acid', |
|
0x04: 'Nickel Cadmium', |
|
0x05: 'Nickel metal hydride', |
|
0x06: 'Lithium-ion', |
|
0x07: 'Zinc air', |
|
0x08: 'Lithium Polymer' |
|
} |
|
self.add_field('device_chemistry', u.unpack_one("B"), unpack.format_table("{}", _device_chemistry)) |
|
if self.length > 0xA: |
|
self.add_field('design_capacity', u.unpack_one("<H")) |
|
if self.length > 0xC: |
|
self.add_field('design_voltage', u.unpack_one("<H")) |
|
if self.length > 0xE: |
|
self.add_field('sbds_version_number', u.unpack_one("B"), self.fmtstr) |
|
if self.length > 0xF: |
|
self.add_field('max_error_battery_data', u.unpack_one("B"), self.fmtstr) |
|
if self.length > 0x10: |
|
if self.serial_number == 0: |
|
self.add_field('sbds_serial_number', u.unpack_one("<H")) |
|
else: |
|
u.skip(2) |
|
if self.length > 0x12: |
|
if self.manufacturer_date == 0: |
|
self.add_field('sbds_manufacture_date', u.unpack_one("<H")) |
|
self.add_field('year_biased_by_1980', bitfields.getbits(self.sbds_manufacture_date, 15, 9), "sbds_manufacture_date[15:9]={}") |
|
self.add_field('month', bitfields.getbits(self.sbds_manufacture_date, 8, 5), "sbds_manufacture_date[8:5]={}") |
|
self.add_field('date', bitfields.getbits(self.sbds_manufacture_date, 4, 0), "sbds_manufacture_date[4:0]={}") |
|
else: |
|
u.skip(2) |
|
if self.length > 0x14: |
|
if self.device_chemistry == 0x02: |
|
self.add_field('sbds_device_chemistry', u.unpack_one("B"), self.fmtstr) |
|
else: |
|
u.skip(1) |
|
if self.length > 0x15: |
|
self.add_field('design_capacity_multiplier', u.unpack_one("B")) |
|
if self.length > 0x16: |
|
self.add_field('oem_specific', u.unpack_one("<I")) |
|
except: |
|
self.decodeFailure = True |
|
print "Error parsing PortableBattery" |
|
import traceback |
|
traceback.print_exc() |
|
self.fini() |
|
|
|
class SystemReset(SmbiosBaseStructure): |
|
smbios_structure_type = 23 |
|
|
|
def __init__(self, u, sm): |
|
super(SystemReset, self).__init__(u, sm) |
|
u = self.u |
|
try: |
|
if self.length > 0x4: |
|
self.add_field('capabilities', u.unpack_one("B")) |
|
self.add_field('contains_watchdog_timer', bool(bitfields.getbits(self.capabilities, 5)), "capabilities[5]={}") |
|
_boot_option = { |
|
0b00: 'Reserved, do not use', |
|
0b01: 'Operating System', |
|
0b10: 'System utilities', |
|
0b11: 'Do not reboot' |
|
} |
|
self.add_field('boot_option_on_limit', bitfields.getbits(self.capabilities, 4, 3), unpack.format_table("capabilities[4:3]={}", _boot_option)) |
|
self.add_field('boot_option_after_watchdog_reset', bitfields.getbits(self.capabilities, 2, 1), unpack.format_table("capabilities[2:1]={}", _boot_option)) |
|
self.add_field('system_reset_enabled_by_user', bool(bitfields.getbits(self.capabilities, 0)), "capabilities[0]={}") |
|
if self.length > 0x5: |
|
self.add_field('reset_count', u.unpack_one("<H")) |
|
if self.length > 0x5: |
|
self.add_field('reset_limit', u.unpack_one("<H")) |
|
if self.length > 0x9: |
|
self.add_field('timer_interval', u.unpack_one("<H")) |
|
if self.length > 0xB: |
|
self.add_field('timeout', u.unpack_one("<H")) |
|
except: |
|
self.decodeFailure = True |
|
print "Error parsing SystemReset" |
|
import traceback |
|
traceback.print_exc() |
|
self.fini() |
|
|
|
class HardwareSecurity(SmbiosBaseStructure): |
|
smbios_structure_type = 24 |
|
|
|
def __init__(self, u, sm): |
|
super(HardwareSecurity, self).__init__(u, sm) |
|
u = self.u |
|
try: |
|
if self.length > 0x4: |
|
self.add_field('hardware_security_settings', u.unpack_one("B")) |
|
_status = { |
|
0x00: 'Disabled', |
|
0x01: 'Enabled', |
|
0x02: 'Not Implemented', |
|
0x03: 'Unknown' |
|
} |
|
self.add_field('power_on_password_status', bitfields.getbits(self.hardware_security_settings, 7, 6), unpack.format_table("hardware_security_settings[7:6]={}", _status)) |
|
self.add_field('keyboard_password_status', bitfields.getbits(self.hardware_security_settings, 5, 4), unpack.format_table("hardware_security_settings[5:4]={}", _status)) |
|
self.add_field('admin_password_status', bitfields.getbits(self.hardware_security_settings, 3, 2), unpack.format_table("hardware_security_settings0[3:2]={}", _status)) |
|
self.add_field('front_panel_reset_status', bitfields.getbits(self.hardware_security_settings, 1, 0), unpack.format_table("hardware_security_settings[1:0]={}", _status)) |
|
except: |
|
self.decodeFailure = True |
|
print "Error parsing HardwareSecurity" |
|
import traceback |
|
traceback.print_exc() |
|
self.fini() |
|
|
|
class SystemPowerControls(SmbiosBaseStructure): |
|
smbios_structure_type = 25 |
|
|
|
def __init__(self, u, sm): |
|
super(SystemPowerControls, self).__init__(u, sm) |
|
u = self.u |
|
try: |
|
if self.length > 0x4: |
|
self.add_field('next_scheduled_poweron_month', u.unpack_one("B")) |
|
self.add_field('next_scheduled_poweron_day_of_month', u.unpack_one("B")) |
|
self.add_field('next_scheduled_poweron_hour', u.unpack_one("B")) |
|
self.add_field('next_scheduled_poweron_minute', u.unpack_one("B")) |
|
self.add_field('next_scheduled_poweron_second', u.unpack_one("B")) |
|
except: |
|
self.decodeFailure = True |
|
print "Error parsing SystemPowerControls" |
|
import traceback |
|
traceback.print_exc() |
|
self.fini() |
|
|
|
class VoltageProbe(SmbiosBaseStructure): |
|
smbios_structure_type = 26 |
|
|
|
def __init__(self, u, sm): |
|
super(VoltageProbe, self).__init__(u, sm) |
|
u = self.u |
|
try: |
|
if self.length > 0x4: |
|
self.add_field('description', u.unpack_one("B"), self.fmtstr) |
|
if self.length > 0x5: |
|
self.add_field('location_and_status', u.unpack_one("B")) |
|
_status = { |
|
0b001: 'Other', |
|
0b010: 'Unknown', |
|
0b011: 'OK', |
|
0b100: 'Non-critical', |
|
0b101: 'Critical', |
|
0b110: 'Non-recoverable' |
|
} |
|
_location = { |
|
0b00001: 'Other', |
|
0b00010: 'Unknown', |
|
0b00011: 'Processor', |
|
0b00100: 'Disk', |
|
0b00101: 'Peripheral Bay', |
|
0b00110: 'System Management Module', |
|
0b00111: 'Motherboard', |
|
0b01000: 'Memory Module', |
|
0b01001: 'Processor Module', |
|
0b01010: 'Power Unit', |
|
0b01011: 'Add-in Card' |
|
} |
|
self.add_field('status', bitfields.getbits(self.location_and_status, 7, 5), unpack.format_table("location_and_status[7:5]={}", _status)) |
|
self.add_field('location', bitfields.getbits(self.location_and_status, 4, 0), unpack.format_table("location_and_status[4:0]={}", _location)) |
|
if self.length > 0x6: |
|
self.add_field('max_value', u.unpack_one("<H")) |
|
if self.length > 0x8: |
|
self.add_field('min_value', u.unpack_one("<H")) |
|
if self.length > 0xA: |
|
self.add_field('resolution', u.unpack_one("<H")) |
|
if self.length > 0xC: |
|
self.add_field('tolerance', u.unpack_one("<H")) |
|
if self.length > 0xE: |
|
self.add_field('accuracy', u.unpack_one("<H")) |
|
if self.length > 0x10: |
|
self.add_field('oem_defined', u.unpack_one("<I")) |
|
if self.length > 0x14: |
|
self.add_field('nominal_value', u.unpack_one("<H")) |
|
except: |
|
self.decodeFailure = True |
|
print "Error parsing VoltageProbe" |
|
import traceback |
|
traceback.print_exc() |
|
self.fini() |
|
|
|
class CoolingDevice(SmbiosBaseStructure): |
|
smbios_structure_type = 27 |
|
|
|
def __init__(self, u, sm): |
|
super(CoolingDevice, self).__init__(u, sm) |
|
u = self.u |
|
try: |
|
if self.length > 0x4: |
|
self.add_field('temperature_probe_handle', u.unpack_one("<H")) |
|
if self.length > 0x6: |
|
self.add_field('device_type_and_status', u.unpack_one("B")) |
|
_status = { |
|
0b001: 'Other', |
|
0b010: 'Unknown', |
|
0b011: 'OK', |
|
0b100: 'Non-critical', |
|
0b101: 'Critical', |
|
0b110: 'Non-recoverable' |
|
} |
|
_type = { |
|
0b00001: 'Other', |
|
0b00010: 'Unknown', |
|
0b00011: 'Fan', |
|
0b00100: 'Centrifugal Blower', |
|
0b00101: 'Chip Fan', |
|
0b00110: 'Cabinet Fan', |
|
0b00111: 'Power Supply Fan', |
|
0b01000: 'Heat Pipe', |
|
0b01001: 'Integrated Refrigeration', |
|
0b10000: 'Active Cooling', |
|
0b10001: 'Passive Cooling' |
|
} |
|
self.add_field('status', bitfields.getbits(self.device_type_and_status, 7, 5), unpack.format_table("device_type_and_status[7:5]={}", _status)) |
|
self.add_field('device_type', bitfields.getbits(self.device_type_and_status, 4, 0), unpack.format_table("device_type_and_status[4:0]={}", _type)) |
|
if self.length > 0x7: |
|
self.add_field('cooling_unit_group', u.unpack_one("B")) |
|
if self.length > 0x8: |
|
self.add_field('OEM_defined', u.unpack_one("<I")) |
|
if self.length > 0xC: |
|
self.add_field('nominal_speed', u.unpack_one("<H")) |
|
if self.length > 0xE: |
|
self.add_field('description', u.unpack_one("B"), self.fmtstr) |
|
except: |
|
self.decodeFailure = True |
|
print "Error parsing CoolingDevice" |
|
import traceback |
|
traceback.print_exc() |
|
self.fini() |
|
|
|
class TemperatureProbe(SmbiosBaseStructure): |
|
smbios_structure_type = 28 |
|
|
|
def __init__(self, u, sm): |
|
super(TemperatureProbe, self).__init__(u, sm) |
|
u = self.u |
|
try: |
|
if self.length > 0x4: |
|
self.add_field('description', u.unpack_one("B"), self.fmtstr) |
|
if self.length > 0x5: |
|
self.add_field('location_and_status', u.unpack_one("B")) |
|
_status = { |
|
0b001: 'Other', |
|
0b010: 'Unknown', |
|
0b011: 'OK', |
|
0b100: 'Non-critical', |
|
0b101: 'Critical', |
|
0b110: 'Non-recoverable' |
|
} |
|
_location = { |
|
0b00001: 'Other', |
|
0b00010: 'Unknown', |
|
0b00011: 'Processor', |
|
0b00100: 'Disk', |
|
0b00101: 'Peripheral Bay', |
|
0b00110: 'System Management Module', |
|
0b00111: 'Motherboard', |
|
0b01000: 'Memory Module', |
|
0b01001: 'Processor Module', |
|
0b01010: 'Power Unit', |
|
0b01011: 'Add-in Card', |
|
0b01100: 'Front Panel Board', |
|
0b01101: 'Back Panel Board', |
|
0b01110: 'Power System Board', |
|
0b01111: 'Drive Back Plane' |
|
} |
|
self.add_field('status', bitfields.getbits(self.location_and_status, 7, 5), unpack.format_table("location_and_status[7:5]={}", _status)) |
|
self.add_field('location', bitfields.getbits(self.location_and_status, 4, 0), unpack.format_table("location_and_status[4:0]={}", _location)) |
|
if self.length > 0x6: |
|
self.add_field('maximum_value', u.unpack_one("<H")) |
|
if self.length > 0x8: |
|
self.add_field('minimum_value', u.unpack_one("<H")) |
|
if self.length > 0xA: |
|
self.add_field('resolution', u.unpack_one("<H")) |
|
if self.length > 0xC: |
|
self.add_field('tolerance', u.unpack_one("<H")) |
|
if self.length > 0xE: |
|
self.add_field('accuracy', u.unpack_one("<H")) |
|
if self.length > 0x10: |
|
self.add_field('OEM_defined', u.unpack_one("<I")) |
|
if self.length > 0x14: |
|
self.add_field('nominal_value', u.unpack_one("<H")) |
|
except: |
|
self.decodeFailure = True |
|
print "Error parsing TemperatureProbe" |
|
import traceback |
|
traceback.print_exc() |
|
self.fini() |
|
|
|
class ElectricalCurrentProbe(SmbiosBaseStructure): |
|
smbios_structure_type = 29 |
|
|
|
def __init__(self, u, sm): |
|
super(ElectricalCurrentProbe, self).__init__(u, sm) |
|
u = self.u |
|
try: |
|
if self.length > 0x4: |
|
self.add_field('description', u.unpack_one("B"), self.fmtstr) |
|
if self.length > 0x5: |
|
self.add_field('location_and_status', u.unpack_one("B")) |
|
_status = { |
|
0b001: 'Other', |
|
0b010: 'Unknown', |
|
0b011: 'OK', |
|
0b100: 'Non-critical', |
|
0b101: 'Critical', |
|
0b110: 'Non-recoverable' |
|
} |
|
_location = { |
|
0b00001: 'Other', |
|
0b00010: 'Unknown', |
|
0b00011: 'Processor', |
|
0b00100: 'Disk', |
|
0b00101: 'Peripheral Bay', |
|
0b00110: 'System Management Module', |
|
0b00111: 'Motherboard', |
|
0b01000: 'Memory Module', |
|
0b01001: 'Processor Module', |
|
0b01010: 'Power Unit', |
|
0b01011: 'Add-in Card', |
|
0b01100: 'Front Panel Board', |
|
0b01101: 'Back Panel Board', |
|
0b01110: 'Power System Board', |
|
0b01111: 'Drive Back Plane' |
|
} |
|
self.add_field('status', bitfields.getbits(self.location_and_status, 7, 5), unpack.format_table("location_and_status[7:5]={}", _status)) |
|
self.add_field('location', bitfields.getbits(self.location_and_status, 4, 0), unpack.format_table("location_and_status[4:0]={}", _location)) |
|
if self.length > 0x6: |
|
self.add_field('maximum_value', u.unpack_one("<H")) |
|
if self.length > 0x8: |
|
self.add_field('minimum_value', u.unpack_one("<H")) |
|
if self.length > 0xA: |
|
self.add_field('resolution', u.unpack_one("<H")) |
|
if self.length > 0xC: |
|
self.add_field('tolerance', u.unpack_one("<H")) |
|
if self.length > 0xE: |
|
self.add_field('accuracy', u.unpack_one("<H")) |
|
if self.length > 0x10: |
|
self.add_field('OEM_defined', u.unpack_one("<I")) |
|
if self.length > 0x14: |
|
self.add_field('nominal_value', u.unpack_one("<H")) |
|
except: |
|
self.decodeFailure = True |
|
print "Error parsing ElectricalCurrentProbe" |
|
import traceback |
|
traceback.print_exc() |
|
self.fini() |
|
|
|
class OutOfBandRemoteAccess(SmbiosBaseStructure): |
|
smbios_structure_type = 30 |
|
|
|
def __init__(self, u, sm): |
|
super(OutOfBandRemoteAccess, self).__init__(u, sm) |
|
u = self.u |
|
try: |
|
if self.length > 0x4: |
|
self.add_field('manufacturer_name', u.unpack_one("B"), self.fmtstr) |
|
if self.length > 0x5: |
|
self.add_field('connections', u.unpack_one("B")) |
|
self.add_field('outbound_connection_enabled', bool(bitfields.getbits(self.connections, 1)), "connections[1]={}") |
|
self.add_field('inbound_connection_enabled', bool(bitfields.getbits(self.connections, 0)), "connections[0]={}") |
|
except: |
|
self.decodeFailure = True |
|
print "Error parsing OutOfBandRemoteAccess" |
|
import traceback |
|
traceback.print_exc() |
|
self.fini() |
|
|
|
class BootIntegrityServicesEntryPoint(SmbiosBaseStructure): |
|
smbios_structure_type = 31 |
|
|
|
class SystemBootInformation(SmbiosBaseStructure): |
|
smbios_structure_type = 32 |
|
|
|
def __init__(self, u, sm): |
|
super(SystemBootInformation, self).__init__(u, sm) |
|
u = self.u |
|
try: |
|
if self.length > 0xA: |
|
u.skip(6) |
|
_boot_status = { |
|
0: 'No errors detected', |
|
1: 'No bootable media', |
|
2: '"normal" operating system failed to load', |
|
3: 'Firmware-detected hardware failure, including "unknown" failure types', |
|
4: 'Operating system-detected hardware failure', |
|
5: 'User-requested boot, usually through a keystroke', |
|
6: 'System security violation', |
|
7: 'Previously-requested image', |
|
8: 'System watchdog timer expired, causing the system to reboot', |
|
xrange(9,127): 'Reserved for future assignment', |
|
xrange(128, 191): 'Vendor/OEM-specific implementations', |
|
xrange(192, 255): 'Product-specific implementations' |
|
} |
|
self.add_field('boot_status', u.unpack_one("B"), unpack.format_table("{}", _boot_status)) |
|
except: |
|
self.decodeFailure = True |
|
print "Error parsing SystemBootInformation" |
|
import traceback |
|
traceback.print_exc() |
|
self.fini() |
|
|
|
class MemoryErrorInfo64Bit(SmbiosBaseStructure): |
|
smbios_structure_type = 33 |
|
|
|
def __init__(self, u, sm): |
|
super(MemoryErrorInfo64Bit, self).__init__(u, sm) |
|
u = self.u |
|
try: |
|
if self.length > 0x4: |
|
_error_types = { |
|
0x01: 'Other', |
|
0x02: 'Unknown', |
|
0x03: 'OK', |
|
0x04: 'Bad read', |
|
0x05: 'Parity error', |
|
0x06: 'Single-bit error', |
|
0x07: 'Double-bit error', |
|
0x08: 'Multi-bit error', |
|
0x09: 'Nibble error', |
|
0x0A: 'Checksum error', |
|
0x0B: 'CRC error', |
|
0x0C: 'Corrected single-bit error', |
|
0x0D: 'Corrected error', |
|
0x0E: 'Uncorrectable error' |
|
} |
|
self.add_field('error_type', u.unpack_one("B"), unpack.format_table("{}", _error_types)) |
|
if self.length > 0x5: |
|
_error_granularity_field = { |
|
0x01: 'Other', |
|
0x02: 'Unknown', |
|
0x03: 'Device level', |
|
0x04: 'Memory partition level' |
|
} |
|
self.add_field('error_granularity', u.unpack_one("B"), unpack.format_table("{}", _error_granularity_field)) |
|
if self.length > 0x6: |
|
_error_operation_field = { |
|
0x01: 'Other', |
|
0x02: 'Unknown', |
|
0x03: 'Read', |
|
0x04: 'Write', |
|
0x05: 'Partial write' |
|
} |
|
self.add_field('error_operation', u.unpack_one("B"), unpack.format_table("{}", _error_operation_field)) |
|
if self.length > 0x7: |
|
self.add_field('vendor_syndrome', u.unpack_one("<I")) |
|
if self.length > 0xB: |
|
self.add_field('memory_array_error_address', u.unpack_one("<Q")) |
|
if self.length > 0xF: |
|
self.add_field('device_error_address', u.unpack_one("<Q")) |
|
if self.length > 0x13: |
|
self.add_field('error_resolution', u.unpack_one("<Q")) |
|
except: |
|
self.decodeFailure = True |
|
print "Error parsing MemoryErrorInfo64Bit" |
|
import traceback |
|
traceback.print_exc() |
|
self.fini() |
|
|
|
class ManagementDevice(SmbiosBaseStructure): |
|
smbios_structure_type = 34 |
|
|
|
def __init__(self, u, sm): |
|
super(ManagementDevice, self).__init__(u, sm) |
|
u = self.u |
|
try: |
|
if self.length > 0x4: |
|
self.add_field('description', u.unpack_one("B"), self.fmtstr) |
|
if self.length > 0x5: |
|
_type = { |
|
0x01: 'Other', |
|
0x02: 'Unknown', |
|
0x03: 'National Semiconductor LM75', |
|
0x04: 'National Semiconductor LM78', |
|
0x05: 'National Semiconductor LM79', |
|
0x06: 'National Semiconductor LM80', |
|
0x07: 'National Semiconductor LM81', |
|
0x08: 'Analog Devices ADM9240', |
|
0x09: 'Dallas Semiconductor DS1780', |
|
0x0A: 'Maxim 1617', |
|
0x0B: 'Genesys GL518SM', |
|
0x0C: 'Winbond W83781D', |
|
0x0D: 'Holtek HT82H791' |
|
} |
|
self.add_field('device_type', u.unpack_one("B"), unpack.format_table("{}", _type)) |
|
if self.length > 0x6: |
|
self.add_field('address', u.unpack_one("<I")) |
|
if self.length > 0xA: |
|
_address_type = { |
|
0x01: 'Other', |
|
0x02: 'Unknown', |
|
0x03: 'I/O Port', |
|
0x04: 'Memory', |
|
0x05: 'SM Bus' |
|
} |
|
self.add_field('address_type', u.unpack_one("B"), unpack.format_table("{}", _address_type)) |
|
except: |
|
self.decodeFailure = True |
|
print "Error parsing ManagementDevice" |
|
import traceback |
|
traceback.print_exc() |
|
self.fini() |
|
|
|
class ManagementDeviceComponent(SmbiosBaseStructure): |
|
smbios_structure_type = 35 |
|
|
|
def __init__(self, u, sm): |
|
super(ManagementDeviceComponent, self).__init__(u, sm) |
|
u = self.u |
|
try: |
|
if self.length > 0x4: |
|
self.add_field('description', u.unpack_one("B"), self.fmtstr) |
|
if self.length > 0x5: |
|
self.add_field('management_device_handle', u.unpack_one("<H")) |
|
if self.length > 0x7: |
|
self.add_field('component_handle', u.unpack_one("<H")) |
|
if self.length > 0x9: |
|
self.add_field('threshold_handle', u.unpack_one("<H")) |
|
except: |
|
self.decodeFailure = True |
|
print "Error parsing ManagementDeviceComponent" |
|
import traceback |
|
traceback.print_exc() |
|
self.fini() |
|
|
|
class ManagementDeviceThresholdData(SmbiosBaseStructure): |
|
smbios_structure_type = 36 |
|
|
|
def __init__(self, u, sm): |
|
super(ManagementDeviceThresholdData, self).__init__(u, sm) |
|
u = self.u |
|
try: |
|
if self.length > 0x4: |
|
self.add_field('lower_threshold_noncritical', u.unpack_one("<H")) |
|
if self.length > 0x6: |
|
self.add_field('upper_threshold_noncritical', u.unpack_one("<H")) |
|
if self.length > 0x8: |
|
self.add_field('lower_threshold_critical', u.unpack_one("<H")) |
|
if self.length > 0xA: |
|
self.add_field('upper_threshold_critical', u.unpack_one("<H")) |
|
if self.length > 0xC: |
|
self.add_field('lower_threshold_nonrecoverable', u.unpack_one("<H")) |
|
if self.length > 0xE: |
|
self.add_field('upper_threshold_nonrecoverable', u.unpack_one("<H")) |
|
except: |
|
self.decodeFailure = True |
|
print "Error parsing ManagementDeviceThresholdData" |
|
import traceback |
|
traceback.print_exc() |
|
self.fini() |
|
|
|
class MemoryChannel(SmbiosBaseStructure): |
|
smbios_structure_type = 37 |
|
|
|
def __init__(self, u, sm): |
|
super(MemoryChannel, self).__init__(u, sm) |
|
u = self.u |
|
try: |
|
if self.length > 0x4: |
|
_channel_type = { |
|
0x01: 'Other', |
|
0x02: 'Unknown', |
|
0x03: 'RamBus', |
|
0x04: 'SyncLink' |
|
} |
|
self.add_field('channel_type', u.unpack_one("B"), unpack.format_table("{}", _channel_type)) |
|
if self.length > 0x6: |
|
self.add_field('max_channel_load', u.unpack_one("B")) |
|
if self.length > 0x8: |
|
self.add_field('memory_device_count', u.unpack_one("B")) |
|
if self.length > 0xA: |
|
self.add_field('memory_device_load', u.unpack_one("B")) |
|
if self.length > 0xC: |
|
self.add_field('memory_device_handle', u.unpack_one("<H")) |
|
except: |
|
self.decodeFailure = True |
|
print "Error parsing MemoryChannel" |
|
import traceback |
|
traceback.print_exc() |
|
self.fini() |
|
|
|
class IPMIDeviceInformation(SmbiosBaseStructure): |
|
smbios_structure_type = 38 |
|
|
|
def __init__(self, u, sm): |
|
super(IPMIDeviceInformation, self).__init__(u, sm) |
|
u = self.u |
|
try: |
|
_interface_type = { |
|
0x00: 'Unknown', |
|
0x01: 'KCS: Keyboard Controller Style', |
|
0x02: 'SMIC: Server Management Interface Chip', |
|
0x03: 'BT: Block Transfer', |
|
xrange(0x04, 0xFF): 'Reserved' |
|
} |
|
self.add_field('interface_type', u.unpack_one("B"), unpack.format_table("{}", _interface_type)) |
|
self.add_field('ipmi_specification_revision', u.unpack_one("B")) |
|
self.add_field('msd_revision', bitfields.getbits(self.ipmi_specification_revision, 7, 4), "ipmi_specification_revision[7:4]={}") |
|
self.add_field('lsd_revision', bitfields.getbits(self.ipmi_specification_revision, 3, 0), "ipmi_specification_revision[3:0]={}") |
|
|
|
self.add_field('i2c_slave_address', u.unpack_one("B")) |
|
self.add_field('nv_storage_device_address', u.unpack_one("B")) |
|
self.add_field('base_address', u.unpack_one("<Q")) |
|
# if lsb is 1, address is in IO space. otherwise, memory-mapped |
|
self.add_field('base_address_modifier_interrupt_info', u.unpack_one("B")) |
|
_reg_spacing = { |
|
0b00: 'Interface registers are on successive byte boundaries', |
|
0b01: 'Interface registers are on 32-bit boundaries', |
|
0b10: 'Interface registers are on 16-byte boundaries', |
|
0b11: 'Reserved' |
|
} |
|
self.add_field('register_spacing', bitfields.getbits(self.base_address_modifier_interrupt_info, 7, 6), unpack.format_table("base_address_modifier_interrupt_info[7:6]={}", _reg_spacing)) |
|
self.add_field('ls_bit_for_addresses', bitfields.getbits(self.base_address_modifier_interrupt_info, 4), "base_address_modifier_interrupt_info[4]={}") |
|
self.add_field('interrupt_info_specified', bool(bitfields.getbits(self.base_address_modifier_interrupt_info, 3)), "base_address_modifier_interrupt_info[3]={}") |
|
_polarity = { |
|
0: 'active low', |
|
1: 'active high' |
|
} |
|
self.add_field('interrupt_polarity', bitfields.getbits(self.base_address_modifier_interrupt_info, 1), unpack.format_table("base_address_modifier_interrupt_info[1]={}", _polarity)) |
|
_interrupt_trigger = { |
|
0: 'edge', |
|
1: 'level' |
|
} |
|
self.add_field('interrupt_trigger_mode', bitfields.getbits(self.base_address_modifier_interrupt_info, 0), unpack.format_table("base_address_modifier_interrupt_info[0]={}", _interrupt_trigger)) |
|
self.add_field('interrupt_number', u.unpack_one("B")) |
|
except: |
|
self.decodeFailure = True |
|
print "Error parsing IPMIDeviceInformation" |
|
import traceback |
|
traceback.print_exc() |
|
self.fini() |
|
|
|
class SystemPowerSupply(SmbiosBaseStructure): |
|
smbios_structure_type = 39 |
|
|
|
def __init__(self, u, sm): |
|
super(SystemPowerSupply, self).__init__(u, sm) |
|
u = self.u |
|
try: |
|
if self.length > 0x4: |
|
self.add_field('power_unit_group', u.unpack_one("B")) |
|
if self.length > 0x5: |
|
self.add_field('location', u.unpack_one("B"), self.fmtstr) |
|
if self.length > 0x6: |
|
self.add_field('device_name', u.unpack_one("B"), self.fmtstr) |
|
if self.length > 0x7: |
|
self.add_field('manufacturer', u.unpack_one("B"), self.fmtstr) |
|
if self.length > 0x8: |
|
self.add_field('serial_number', u.unpack_one("B"), self.fmtstr) |
|
if self.length > 0x9: |
|
self.add_field('asset_tag', u.unpack_one("B"), self.fmtstr) |
|
if self.length > 0xA: |
|
self.add_field('model_part_number', u.unpack_one("B"), self.fmtstr) |
|
if self.length > 0xB: |
|
self.add_field('revision_level', u.unpack_one("B"), self.fmtstr) |
|
if self.length > 0xC: |
|
self.add_field('max_power_capacity', u.unpack_one("<H")) |
|
if self.length > 0xE: |
|
self.add_field('power_supply_characteristics', u.unpack_one("<H")) |
|
_dmtf_power_supply_type = { |
|
0b001: 'Other', |
|
0b010: 'Unknown', |
|
0b011: 'Linear', |
|
0b100: 'Switching', |
|
0b101: 'Battery', |
|
0b110: 'UPS', |
|
0b111: 'Converter', |
|
0b1000: 'Regulator', |
|
xrange(0b1001, 0b1111): 'Reserved' |
|
} |
|
self.add_field('dmtf_power_supply_type', bitfields.getbits(self.power_supply_characteristics, 13, 10), unpack.format_table("power_supply_characteristics[13:10]={}", _dmtf_power_supply_type)) |
|
_status = { |
|
0b001: 'Other', |
|
0b010: 'Unknown', |
|
0b011: 'OK', |
|
0b100: 'Non-critical', |
|
0b101: 'Critical; power supply has failed and has been taken off-line' |
|
} |
|
self.add_field('status', bitfields.getbits(self.power_supply_characteristics, 9, 7), unpack.format_table("power_supply_characteristics[9:7]={}", _status)) |
|
_dmtf_input_voltage_range_switching = { |
|
0b001: 'Other', |
|
0b010: 'Unknown', |
|
0b011: 'Manual', |
|
0b100: 'Auto-switch', |
|
0b101: 'Wide range', |
|
0b110: 'Not applicable', |
|
xrange(0b0111, 0b1111): 'Reserved' |
|
} |
|
self.add_field('dmtf_input_voltage_range_switching', bitfields.getbits(self.power_supply_characteristics, 6, 3), unpack.format_table("power_supply_characteristics[6:3]={}", _dmtf_input_voltage_range_switching)) |
|
self.add_field('power_supply_unplugged', bool(bitfields.getbits(self.power_supply_characteristics, 2)), "power_supply_characteristics[2]={}") |
|
self.add_field('power_supply_present', bool(bitfields.getbits(self.power_supply_characteristics, 1)), "power_supply_characteristics[1]={}") |
|
self.add_field('power_supply_hot_replaceable', bool(bitfields.getbits(self.power_supply_characteristics, 0)), "power_supply_characteristics[0]={}") |
|
if self.length > 0x10: |
|
self.add_field('input_voltage_probe_handle', u.unpack_one("<H")) |
|
if self.length > 0x12: |
|
self.add_field('cooling_device_handle', u.unpack_one("<H")) |
|
if self.length > 0x14: |
|
self.add_field('input_current_probe_handle', u.unpack_one("<H")) |
|
except: |
|
self.decodeFailure = True |
|
print "Error parsing SystemPowerSupply" |
|
import traceback |
|
traceback.print_exc() |
|
self.fini() |
|
|
|
class AdditionalInformation(SmbiosBaseStructure): |
|
smbios_structure_type = 40 |
|
|
|
def __init__(self, u, sm): |
|
super(AdditionalInformation, self).__init__(u, sm) |
|
u = self.u |
|
try: |
|
if self.length > 0x4: |
|
self.add_field('num_additional_information_entries', u.unpack_one("B")) |
|
if self.length > 0x5: |
|
self.add_field('additional_information_entry_length', u.unpack_one("B")) |
|
self.add_field('referenced_handle', u.unpack_one("<H")) |
|
self.add_field('referenced_offset', u.unpack_one("B")) |
|
self.add_field('string', u.unpack_one("B"), self.fmtstr) |
|
self.add_field('value', u.unpack_rest()) |
|
except: |
|
self.decodeFailure = True |
|
print "Error parsing AdditionalInformation" |
|
import traceback |
|
traceback.print_exc() |
|
self.fini() |
|
|
|
class OnboardDevicesExtendedInformation(SmbiosBaseStructure): |
|
smbios_structure_type = 41 |
|
|
|
def __init__(self, u, sm): |
|
super(OnboardDevicesExtendedInformation, self).__init__(u, sm) |
|
u = self.u |
|
try: |
|
if self.length > 0x4: |
|
self.add_field('reference_designation', u.unpack_one("B"), self.fmtstr) |
|
if self.length > 0x5: |
|
self.add_field('device_type', u.unpack_one("B")) |
|
self.add_field('device_enabled', bool(bitfields.getbits(self.device_type, 7)), "device_type[7]={}") |
|
_device_types = { |
|
0x01: 'Other', |
|
0x02: 'Unknown', |
|
0x03: 'Video', |
|
0x04: 'SCSI Controller', |
|
0x05: 'Ethernet', |
|
0x06: 'Token Ring', |
|
0x07: 'Sound', |
|
0x08: 'PATA Controller', |
|
0x09: 'SATA Controller', |
|
0x0A: 'SAS Controller' |
|
} |
|
self.add_field('type_of_device', bitfields.getbits(self.device_type, 6, 0), unpack.format_table("device_type[6:0]={}", _device_types)) |
|
if self.length > 0x6: |
|
self.add_field('device_type_instance', u.unpack_one("B")) |
|
if self.length > 0x7: |
|
self.add_field('segment_group_number', u.unpack_one("<H")) |
|
if self.length > 0x9: |
|
self.add_field('bus_number', u.unpack_one("B"), self.fmtstr) |
|
if self.length > 0xA: |
|
self.add_field('device_and_function_number', u.unpack_one("B")) |
|
self.add_field('device_number', bitfields.getbits(self.device_type, 7, 3), "device_and_function_number[7:3]={}") |
|
self.add_field('function_number', bitfields.getbits(self.device_type, 2, 0), "device_and_function_number[2:0]={}") |
|
except: |
|
self.decodeFailure = True |
|
print "Error parsing OnboardDevicesExtendedInformation" |
|
import traceback |
|
traceback.print_exc() |
|
self.fini() |
|
|
|
class ManagementControllerHostInterface(SmbiosBaseStructure): |
|
smbios_structure_type = 42 |
|
|
|
def __init__(self, u, sm): |
|
super(ManagementControllerHostInterface, self).__init__(u, sm) |
|
u = self.u |
|
try: |
|
if self.length > 0x4: |
|
_interface_types = { |
|
0x00: 'Reserved', |
|
0x01: 'Reserved', |
|
0x02: 'KCS: Keyboard Controller Style', |
|
0x03: '8250 UART Register Compatible', |
|
0x04: '16450 UART Register Compatible', |
|
0x05: '16550/16550A UART Register Compatible', |
|
0x06: '16650/16650A UART Register Compatible', |
|
0x07: '16750/16750A UART Register Compatible', |
|
0x08: '16850/16850A UART Register Compatible', |
|
0xF0: 'OEM' |
|
} |
|
self.add_field('interface_type', u.unpack_one("B"), unpack.format_table("{}", _interface_types)) |
|
if self.length > 0x5: |
|
self.add_field('mc_host_interface_data', u.unpack_rest(), self.fmtstr) |
|
except: |
|
self.decodeFailure = True |
|
print "Error parsing ManagementControllerHostInterface" |
|
import traceback |
|
traceback.print_exc() |
|
self.fini() |
|
|
|
class Inactive(SmbiosBaseStructure): |
|
smbios_structure_type = 126 |
|
|
|
def __init__(self, u, sm): |
|
super(Inactive, self).__init__(u, sm) |
|
self.fini() |
|
|
|
class EndOfTable(SmbiosBaseStructure): |
|
smbios_structure_type = 127 |
|
|
|
def __init__(self, u, sm): |
|
super(EndOfTable, self).__init__(u, sm) |
|
self.fini() |
|
|
|
class SmbiosStructureUnknown(SmbiosBaseStructure): |
|
smbios_structure_type = None |
|
|
|
def __init__(self, u, sm): |
|
super(SmbiosStructureUnknown, self).__init__(u, sm) |
|
self.fini() |
|
|
|
_smbios_structures = [ |
|
BIOSInformation, |
|
SystemInformation, |
|
BaseboardInformation, |
|
SystemEnclosure, |
|
ProcessorInformation, |
|
MemoryControllerInformation, |
|
MemoryModuleInformation, |
|
CacheInformation, |
|
PortConnectorInfo, |
|
SystemSlots, |
|
OnBoardDevicesInformation, |
|
OEMStrings, |
|
SystemConfigOptions, |
|
BIOSLanguageInformation, |
|
GroupAssociations, |
|
SystemEventLog, |
|
PhysicalMemoryArray, |
|
MemoryDevice, |
|
MemoryErrorInfo32Bit, |
|
MemoryArrayMappedAddress, |
|
MemoryDeviceMappedAddress, |
|
BuiltInPointingDevice, |
|
PortableBattery, |
|
SystemReset, |
|
HardwareSecurity, |
|
SystemPowerControls, |
|
VoltageProbe, |
|
CoolingDevice, |
|
TemperatureProbe, |
|
ElectricalCurrentProbe, |
|
OutOfBandRemoteAccess, |
|
BootIntegrityServicesEntryPoint, |
|
SystemBootInformation, |
|
MemoryErrorInfo64Bit, |
|
ManagementDevice, |
|
ManagementDeviceComponent, |
|
ManagementDeviceThresholdData, |
|
MemoryChannel, |
|
IPMIDeviceInformation, |
|
SystemPowerSupply, |
|
AdditionalInformation, |
|
OnboardDevicesExtendedInformation, |
|
ManagementControllerHostInterface, |
|
Inactive, |
|
EndOfTable, |
|
SmbiosStructureUnknown, # Must always come last |
|
] |
|
|
|
def log_smbios_info(): |
|
with redirect.logonly(): |
|
try: |
|
sm = SMBIOS() |
|
print |
|
if sm is None: |
|
print "No SMBIOS structures found" |
|
return |
|
output = {} |
|
known_types = (0, 1) |
|
for sm_struct in sm.structures: |
|
if sm_struct.type in known_types: |
|
output.setdefault(sm_struct.type, []).append(sm_struct) |
|
if len(output) == len(known_types): |
|
break |
|
|
|
print "SMBIOS information:" |
|
for key in sorted(known_types): |
|
for s in output.get(key, ["No structure of type {} found".format(key)]): |
|
print ttypager._wrap("{}: {}".format(key, s)) |
|
except: |
|
print "Error parsing SMBIOS information:" |
|
import traceback |
|
traceback.print_exc() |
|
|
|
def dump_raw(): |
|
try: |
|
sm = SMBIOS() |
|
if sm: |
|
s = "SMBIOS -- Raw bytes and structure decode.\n\n" |
|
|
|
s += str(sm.header) + '\n' |
|
s += bits.dumpmem(sm._header_memory) + '\n' |
|
|
|
s += "Raw bytes for the SMBIOS structures\n" |
|
s += bits.dumpmem(sm._structure_memory) + '\n' |
|
|
|
for sm_struct in sm.structures: |
|
s += str(sm_struct) + '\n' |
|
s += bits.dumpmem(sm_struct.raw_data) |
|
|
|
s += "Strings:\n" |
|
for n in range(1, len(getattr(sm_struct, "strings", [])) + 1): |
|
s += str(sm_struct.fmtstr(n)) + '\n' |
|
s += bits.dumpmem(sm_struct.raw_strings) + '\n' |
|
else: |
|
s = "No SMBIOS structures found" |
|
ttypager.ttypager_wrap(s, indent=False) |
|
except: |
|
print "Error parsing SMBIOS information:" |
|
import traceback |
|
traceback.print_exc() |
|
|
|
def dump(): |
|
try: |
|
sm = SMBIOS() |
|
if sm: |
|
s = str(sm) |
|
else: |
|
s = "No SMBIOS structures found" |
|
ttypager.ttypager_wrap(s, indent=False) |
|
except: |
|
print "Error parsing SMBIOS information:" |
|
import traceback |
|
traceback.print_exc() |
|
|
|
def annex_a_conformance(): |
|
try: |
|
sm = SMBIOS() |
|
|
|
# check: 1. The table anchor string "_SM_" is present in the address range 0xF0000 to 0xFFFFF on a 16-byte bound |
|
|
|
def table_entry_point_verification(): |
|
''' Verify table entry-point''' |
|
if (sm.header.length < 0x1F): |
|
print "Failure: Table entry-point - The entry-point Length must be at least 0x1F" |
|
if sm.header.checksum != 0: |
|
print "Failure: Table entry-point - The entry-point checksum must evaluate to 0" |
|
if ((sm.header.major_version < 2) and (sm.header.minor_version < 4)): |
|
print "Failure: Table entry-point - SMBIOS version must be at least 2.4" |
|
if (sm.header.intermediate_anchor_string == '_DMI_'): |
|
print "Failure: Table entry-point - The Intermediate Anchor String must be '_DMI_'" |
|
if (sm.header.intermediate_checksum != 0): |
|
print "Failure: Table entry-point - The Intermediate checksum must evaluate to 0" |
|
|
|
#check: 3. The structure-table is traversable and conforms to the entry-point specifications: |
|
|
|
def req_structures(): |
|
'''Checks for required structures and corresponding data''' |
|
types_present = [sm.structures[x].smbios_structure_type for x in range(len(sm.structures))] |
|
required = [0, 1, 4, 7, 9, 16, 17, 19, 31, 32] |
|
for s in required: |
|
if s not in set(types_present): |
|
print "Failure: Type {} required but not found".format(s) |
|
|
|
else: |
|
if s == 0: |
|
if types_present.count(s) > 1: |
|
print "Failure: Type {} - One and only one structure of this type must be present.".format(s) |
|
if sm.structure_type(s).length < 0x18: |
|
print "Failure: Type {} - The structure Length field must be at least 0x18".format(s) |
|
if sm.structure_type(s).version is None: |
|
print "Failure: Type {} - BIOS Version string must be present and non-null.".format(s) |
|
if sm.structure_type(s).release_date is None: |
|
print "Failure: Type {} - BIOS Release Date string must be present, non-null, and include a 4-digit year".format(s) |
|
if bitfields.getbits(sm.structure_type(s).characteristics, 3, 0) != 0 or bitfields.getbits(sm.structure_type(s).characteristics, 31, 4) == 0: |
|
print "Failure: Type {} - BIOS Characteristics: bits 3:0 must all be 0, and at least one of bits 31:4 must be set to 1.".format(s) |
|
elif s == 1: |
|
if types_present.count(s) > 1: |
|
print "Failure: Type {} - One and only one structure of this type must be present.".format(s) |
|
if sm.structure_type(s).length < 0x1B: |
|
print "Failure: Type {} - The structure Length field must be at least 0x1B".format(s) |
|
if sm.structure_type(s).manufacturer == None: |
|
print "Failure: Type {} - Manufacturer string must be present and non-null.".format(s) |
|
if sm.structure_type(s).product_name == None: |
|
print "Failure: Type {} - Product Name string must be present and non-null".format(s) |
|
if sm.structure_type(s).uuid == '00000000 00000000' and sm.structure_type(s).uuid == 'FFFFFFFF FFFFFFFF': |
|
print "Failure: Type {} - UUID field must be neither 00000000 00000000 nor FFFFFFFF FFFFFFFF.".format(s) |
|
if sm.structure_type(s).wakeup_type == 00 and sm.structure_type(s).wakeup_type == 0x02: |
|
print "Failure: Type {} - Wake-up Type field must be neither 00h (Reserved) nor 02h (Unknown).".format(s) |
|
# continue for remaining required types |
|
|
|
# check remaining conformance guidelines |
|
|
|
table_entry_point_verification() |
|
req_structures() |
|
except: |
|
print "Error checking ANNEX A conformance guidelines" |
|
import traceback |
|
traceback.print_exc() |