| /* | |
| * MIPS internal definitions and helpers | |
| * | |
| * This work is licensed under the terms of the GNU GPL, version 2 or later. | |
| * See the COPYING file in the top-level directory. | |
| */ | |
| #ifndef MIPS_INTERNAL_H | |
| #define MIPS_INTERNAL_H | |
| #include "exec/memattrs.h" | |
| #ifdef CONFIG_TCG | |
| #include "tcg/tcg-internal.h" | |
| #endif | |
| #include "cpu.h" | |
| /* | |
| * MMU types, the first four entries have the same layout as the | |
| * CP0C0_MT field. | |
| */ | |
| enum mips_mmu_types { | |
| MMU_TYPE_NONE = 0, | |
| MMU_TYPE_R4000 = 1, /* Standard TLB */ | |
| MMU_TYPE_BAT = 2, /* Block Address Translation */ | |
| MMU_TYPE_FMT = 3, /* Fixed Mapping */ | |
| MMU_TYPE_DVF = 4, /* Dual VTLB and FTLB */ | |
| MMU_TYPE_R3000, | |
| MMU_TYPE_R6000, | |
| MMU_TYPE_R8000 | |
| }; | |
| struct mips_def_t { | |
| const char *name; | |
| int32_t CP0_PRid; | |
| int32_t CP0_Config0; | |
| int32_t CP0_Config1; | |
| int32_t CP0_Config2; | |
| int32_t CP0_Config3; | |
| int32_t CP0_Config4; | |
| int32_t CP0_Config4_rw_bitmask; | |
| int32_t CP0_Config5; | |
| int32_t CP0_Config5_rw_bitmask; | |
| int32_t CP0_Config6; | |
| int32_t CP0_Config6_rw_bitmask; | |
| int32_t CP0_Config7; | |
| int32_t CP0_Config7_rw_bitmask; | |
| target_ulong CP0_LLAddr_rw_bitmask; | |
| int CP0_LLAddr_shift; | |
| int32_t SYNCI_Step; | |
| /* | |
| * @CCRes: rate at which the coprocessor 0 counter increments | |
| * | |
| * The Count register acts as a timer, incrementing at a constant rate, | |
| * whether or not an instruction is executed, retired, or any forward | |
| * progress is made through the pipeline. The rate at which the counter | |
| * increments is implementation dependent, and is a function of the | |
| * pipeline clock of the processor, not the issue width of the processor. | |
| */ | |
| int32_t CCRes; | |
| int32_t CP0_Status_rw_bitmask; | |
| int32_t CP0_TCStatus_rw_bitmask; | |
| int32_t CP0_SRSCtl; | |
| int32_t CP1_fcr0; | |
| int32_t CP1_fcr31_rw_bitmask; | |
| int32_t CP1_fcr31; | |
| int32_t MSAIR; | |
| int32_t SEGBITS; | |
| int32_t PABITS; | |
| int32_t CP0_SRSConf0_rw_bitmask; | |
| int32_t CP0_SRSConf0; | |
| int32_t CP0_SRSConf1_rw_bitmask; | |
| int32_t CP0_SRSConf1; | |
| int32_t CP0_SRSConf2_rw_bitmask; | |
| int32_t CP0_SRSConf2; | |
| int32_t CP0_SRSConf3_rw_bitmask; | |
| int32_t CP0_SRSConf3; | |
| int32_t CP0_SRSConf4_rw_bitmask; | |
| int32_t CP0_SRSConf4; | |
| int32_t CP0_PageGrain_rw_bitmask; | |
| int32_t CP0_PageGrain; | |
| target_ulong CP0_EBaseWG_rw_bitmask; | |
| uint32_t lcsr_cpucfg1; | |
| uint32_t lcsr_cpucfg2; | |
| uint64_t insn_flags; | |
| enum mips_mmu_types mmu_type; | |
| }; | |
| extern const char regnames[32][3]; | |
| extern const char fregnames[32][4]; | |
| extern const struct mips_def_t mips_defs[]; | |
| extern const int mips_defs_number; | |
| int mips_cpu_gdb_read_register(CPUState *cpu, GByteArray *buf, int reg); | |
| int mips_cpu_gdb_write_register(CPUState *cpu, uint8_t *buf, int reg); | |
| QTree *mips_octeon_llm_tree_new(void); | |
| uint64_t mips_octeon_llm_load(QTree *tree, uint64_t addr); | |
| void mips_octeon_llm_store(QTree **treep, uint64_t addr, uint64_t value); | |
| #define USEG_LIMIT ((target_ulong)(int32_t)0x7FFFFFFFUL) | |
| #define KSEG0_BASE ((target_ulong)(int32_t)0x80000000UL) | |
| #define KSEG1_BASE ((target_ulong)(int32_t)0xA0000000UL) | |
| #define KSEG2_BASE ((target_ulong)(int32_t)0xC0000000UL) | |
| #define KSEG3_BASE ((target_ulong)(int32_t)0xE0000000UL) | |
| #if !defined(CONFIG_USER_ONLY) | |
| enum { | |
| TLBRET_XI = -6, | |
| TLBRET_RI = -5, | |
| TLBRET_DIRTY = -4, | |
| TLBRET_INVALID = -3, | |
| TLBRET_NOMATCH = -2, | |
| TLBRET_BADADDR = -1, | |
| TLBRET_MATCH = 0 | |
| }; | |
| int get_physical_address(CPUMIPSState *env, hwaddr *physical, | |
| int *prot, target_ulong real_address, | |
| MMUAccessType access_type, int mmu_idx); | |
| bool mips_cpu_translate_for_debug(CPUState *cpu, vaddr addr, | |
| TranslateForDebugResult *result); | |
| typedef struct r4k_tlb_t r4k_tlb_t; | |
| struct r4k_tlb_t { | |
| target_ulong VPN; | |
| uint32_t PageMask; | |
| uint16_t ASID; | |
| uint32_t MMID; | |
| unsigned int G:1; | |
| unsigned int C0:3; | |
| unsigned int C1:3; | |
| unsigned int V0:1; | |
| unsigned int V1:1; | |
| unsigned int D0:1; | |
| unsigned int D1:1; | |
| unsigned int XI0:1; | |
| unsigned int XI1:1; | |
| unsigned int RI0:1; | |
| unsigned int RI1:1; | |
| unsigned int EHINV:1; | |
| uint64_t PFN[2]; | |
| }; | |
| struct CPUMIPSTLBContext { | |
| uint32_t nb_tlb; | |
| uint32_t tlb_in_use; | |
| int (*map_address)(CPUMIPSState *env, hwaddr *physical, int *prot, | |
| target_ulong address, MMUAccessType access_type); | |
| void (*helper_tlbwi)(CPUMIPSState *env); | |
| void (*helper_tlbwr)(CPUMIPSState *env); | |
| void (*helper_tlbp)(CPUMIPSState *env); | |
| void (*helper_tlbr)(CPUMIPSState *env); | |
| void (*helper_tlbinv)(CPUMIPSState *env); | |
| void (*helper_tlbinvf)(CPUMIPSState *env); | |
| union { | |
| struct { | |
| r4k_tlb_t tlb[MIPS_TLB_MAX]; | |
| } r4k; | |
| } mmu; | |
| }; | |
| void sync_c0_status(CPUMIPSState *env, CPUMIPSState *cpu, int tc); | |
| void cpu_mips_store_status(CPUMIPSState *env, target_ulong val); | |
| void cpu_mips_store_cause(CPUMIPSState *env, target_ulong val); | |
| extern const VMStateDescription vmstate_mips_cpu; | |
| static inline bool cpu_mips_hw_interrupts_enabled(const CPUMIPSState *env) | |
| { | |
| return (env->CP0_Status & (1 << CP0St_IE)) && | |
| !(env->CP0_Status & (1 << CP0St_EXL)) && | |
| !(env->CP0_Status & (1 << CP0St_ERL)) && | |
| !(env->hflags & MIPS_HFLAG_DM) && | |
| /* | |
| * Note that the TCStatus IXMT field is initialized to zero, | |
| * and only MT capable cores can set it to one. So we don't | |
| * need to check for MT capabilities here. | |
| */ | |
| !(env->active_tc.CP0_TCStatus & (1 << CP0TCSt_IXMT)); | |
| } | |
| /* Check if there is pending and not masked out interrupt */ | |
| static inline bool cpu_mips_hw_interrupts_pending(const CPUMIPSState *env) | |
| { | |
| int32_t pending; | |
| int32_t status; | |
| bool r; | |
| pending = env->CP0_Cause & CP0Ca_IP_mask; | |
| status = env->CP0_Status & CP0Ca_IP_mask; | |
| if (env->CP0_Config3 & (1 << CP0C3_VEIC)) { | |
| /* | |
| * A MIPS configured with a vectorizing external interrupt controller | |
| * will feed a vector into the Cause pending lines. The core treats | |
| * the status lines as a vector level, not as individual masks. | |
| */ | |
| r = pending > status; | |
| } else { | |
| /* | |
| * A MIPS configured with compatibility or VInt (Vectored Interrupts) | |
| * treats the pending lines as individual interrupt lines, the status | |
| * lines are individual masks. | |
| */ | |
| r = (pending & status) != 0; | |
| } | |
| return r; | |
| } | |
| #endif /* !CONFIG_USER_ONLY */ | |
| void msa_reset(CPUMIPSState *env); | |
| /* cp0_timer.c */ | |
| uint32_t cpu_mips_get_count(CPUMIPSState *env); | |
| void cpu_mips_store_count(CPUMIPSState *env, uint32_t value); | |
| void cpu_mips_store_compare(CPUMIPSState *env, uint32_t value); | |
| void cpu_mips_start_count(CPUMIPSState *env); | |
| void cpu_mips_stop_count(CPUMIPSState *env); | |
| static inline void mips_env_set_pc(CPUMIPSState *env, target_ulong value) | |
| { | |
| env->active_tc.PC = value & ~(target_ulong)1; | |
| if (value & 1) { | |
| env->hflags |= MIPS_HFLAG_M16; | |
| } else { | |
| env->hflags &= ~(MIPS_HFLAG_M16); | |
| } | |
| } | |
| static inline bool mips_env_is_64bit(const CPUMIPSState *env) | |
| { | |
| return env->cpu_model->insn_flags & CPU_MIPS64; | |
| } | |
| static inline bool mips_env_is_bigendian(CPUMIPSState *env) | |
| { | |
| return extract32(env->CP0_Config0, CP0C0_BE, 1); | |
| } | |
| static inline MemOp mo_endian_env(CPUMIPSState *env) | |
| { | |
| return mips_env_is_bigendian(env) ? MO_BE : MO_LE; | |
| } | |
| static inline void restore_pamask(CPUMIPSState *env) | |
| { | |
| if (env->hflags & MIPS_HFLAG_ELPA) { | |
| env->PAMask = (1ULL << env->PABITS) - 1; | |
| } else { | |
| env->PAMask = PAMASK_BASE; | |
| } | |
| } | |
| static inline int mips_vpe_active(const CPUMIPSState *env) | |
| { | |
| const MIPSCPU *cpu = env_archcpu(env); | |
| int active = 1; | |
| /* Check that the VPE is enabled. */ | |
| if (!(cpu->mvp->CP0_MVPControl & (1 << CP0MVPCo_EVP))) { | |
| active = 0; | |
| } | |
| /* Check that the VPE is activated. */ | |
| if (!(env->CP0_VPEConf0 & (1 << CP0VPEC0_VPA))) { | |
| active = 0; | |
| } | |
| /* | |
| * Now verify that there are active thread contexts in the VPE. | |
| * | |
| * This assumes the CPU model will internally reschedule threads | |
| * if the active one goes to sleep. If there are no threads available | |
| * the active one will be in a sleeping state, and we can turn off | |
| * the entire VPE. | |
| */ | |
| if (!(env->active_tc.CP0_TCStatus & (1 << CP0TCSt_A))) { | |
| /* TC is not activated. */ | |
| active = 0; | |
| } | |
| if (env->active_tc.CP0_TCHalt & 1) { | |
| /* TC is in halt state. */ | |
| active = 0; | |
| } | |
| return active; | |
| } | |
| static inline int mips_vp_active(const CPUMIPSState *env) | |
| { | |
| CPUState *cs; | |
| /* Check if the VP disabled other VPs (which means the VP is enabled) */ | |
| if ((env->CP0_VPControl >> CP0VPCtl_DIS) & 1) { | |
| return 1; | |
| } | |
| /* Check if the virtual processor is disabled due to a DVP */ | |
| CPU_FOREACH(cs) { | |
| CPUMIPSState *other_env = cpu_env(cs); | |
| if ((other_env != env) && | |
| ((other_env->CP0_VPControl >> CP0VPCtl_DIS) & 1)) { | |
| return 0; | |
| } | |
| } | |
| return 1; | |
| } | |
| static inline void compute_hflags(CPUMIPSState *env) | |
| { | |
| env->hflags &= ~(MIPS_HFLAG_COP1X | MIPS_HFLAG_64 | MIPS_HFLAG_CP0 | | |
| MIPS_HFLAG_F64 | MIPS_HFLAG_FPU | MIPS_HFLAG_KSU | | |
| MIPS_HFLAG_AWRAP | MIPS_HFLAG_DSP | MIPS_HFLAG_DSP_R2 | | |
| MIPS_HFLAG_DSP_R3 | MIPS_HFLAG_SBRI | MIPS_HFLAG_MSA | | |
| MIPS_HFLAG_FRE | MIPS_HFLAG_ELPA | MIPS_HFLAG_ERL); | |
| if (env->CP0_Status & (1 << CP0St_ERL)) { | |
| env->hflags |= MIPS_HFLAG_ERL; | |
| } | |
| if (!(env->CP0_Status & (1 << CP0St_EXL)) && | |
| !(env->CP0_Status & (1 << CP0St_ERL)) && | |
| !(env->hflags & MIPS_HFLAG_DM)) { | |
| env->hflags |= (env->CP0_Status >> CP0St_KSU) & | |
| MIPS_HFLAG_KSU; | |
| } | |
| #if defined(TARGET_MIPS64) | |
| if ((env->insn_flags & ISA_MIPS3) && | |
| (((env->hflags & MIPS_HFLAG_KSU) != MIPS_HFLAG_UM) || | |
| (env->CP0_Status & (1 << CP0St_PX)) || | |
| (env->CP0_Status & (1 << CP0St_UX)))) { | |
| env->hflags |= MIPS_HFLAG_64; | |
| } | |
| if (!(env->insn_flags & ISA_MIPS3)) { | |
| env->hflags |= MIPS_HFLAG_AWRAP; | |
| } else if (((env->hflags & MIPS_HFLAG_KSU) == MIPS_HFLAG_UM) && | |
| !(env->CP0_Status & (1 << CP0St_UX))) { | |
| env->hflags |= MIPS_HFLAG_AWRAP; | |
| } else if (env->insn_flags & ISA_MIPS_R6) { | |
| /* Address wrapping for Supervisor and Kernel is specified in R6 */ | |
| if ((((env->hflags & MIPS_HFLAG_KSU) == MIPS_HFLAG_SM) && | |
| !(env->CP0_Status & (1 << CP0St_SX))) || | |
| (((env->hflags & MIPS_HFLAG_KSU) == MIPS_HFLAG_KM) && | |
| !(env->CP0_Status & (1 << CP0St_KX)))) { | |
| env->hflags |= MIPS_HFLAG_AWRAP; | |
| } | |
| } | |
| #endif | |
| if (((env->CP0_Status & (1 << CP0St_CU0)) && | |
| !(env->insn_flags & ISA_MIPS_R6)) || | |
| !(env->hflags & MIPS_HFLAG_KSU)) { | |
| env->hflags |= MIPS_HFLAG_CP0; | |
| } | |
| if (env->CP0_Status & (1 << CP0St_CU1)) { | |
| env->hflags |= MIPS_HFLAG_FPU; | |
| } | |
| if (env->CP0_Status & (1 << CP0St_FR)) { | |
| env->hflags |= MIPS_HFLAG_F64; | |
| } | |
| if (((env->hflags & MIPS_HFLAG_KSU) != MIPS_HFLAG_KM) && | |
| (env->CP0_Config5 & (1 << CP0C5_SBRI))) { | |
| env->hflags |= MIPS_HFLAG_SBRI; | |
| } | |
| if (env->insn_flags & ASE_DSP_R3) { | |
| /* | |
| * Our cpu supports DSP R3 ASE, so enable | |
| * access to DSP R3 resources. | |
| */ | |
| if (env->CP0_Status & (1 << CP0St_MX)) { | |
| env->hflags |= MIPS_HFLAG_DSP | MIPS_HFLAG_DSP_R2 | | |
| MIPS_HFLAG_DSP_R3; | |
| } | |
| } else if (env->insn_flags & ASE_DSP_R2) { | |
| /* | |
| * Our cpu supports DSP R2 ASE, so enable | |
| * access to DSP R2 resources. | |
| */ | |
| if (env->CP0_Status & (1 << CP0St_MX)) { | |
| env->hflags |= MIPS_HFLAG_DSP | MIPS_HFLAG_DSP_R2; | |
| } | |
| } else if (env->insn_flags & ASE_DSP) { | |
| /* | |
| * Our cpu supports DSP ASE, so enable | |
| * access to DSP resources. | |
| */ | |
| if (env->CP0_Status & (1 << CP0St_MX)) { | |
| env->hflags |= MIPS_HFLAG_DSP; | |
| } | |
| } | |
| if (env->insn_flags & ISA_MIPS_R2) { | |
| if (env->active_fpu.fcr0 & (1 << FCR0_F64)) { | |
| env->hflags |= MIPS_HFLAG_COP1X; | |
| } | |
| } else if (env->insn_flags & ISA_MIPS_R1) { | |
| if (env->hflags & MIPS_HFLAG_64) { | |
| env->hflags |= MIPS_HFLAG_COP1X; | |
| } | |
| } else if (env->insn_flags & ISA_MIPS4) { | |
| /* | |
| * All supported MIPS IV CPUs use the XX (CU3) to enable | |
| * and disable the MIPS IV extensions to the MIPS III ISA. | |
| * Some other MIPS IV CPUs ignore the bit, so the check here | |
| * would be too restrictive for them. | |
| */ | |
| if (env->CP0_Status & (1U << CP0St_CU3)) { | |
| env->hflags |= MIPS_HFLAG_COP1X; | |
| } | |
| } | |
| if (ase_msa_available(env)) { | |
| if (env->CP0_Config5 & (1 << CP0C5_MSAEn)) { | |
| env->hflags |= MIPS_HFLAG_MSA; | |
| } | |
| } | |
| if (env->active_fpu.fcr0 & (1 << FCR0_FREP)) { | |
| if (env->CP0_Config5 & (1 << CP0C5_FRE)) { | |
| env->hflags |= MIPS_HFLAG_FRE; | |
| } | |
| } | |
| if (env->CP0_Config3 & (1 << CP0C3_LPA)) { | |
| if (env->CP0_PageGrain & (1 << CP0PG_ELPA)) { | |
| env->hflags |= MIPS_HFLAG_ELPA; | |
| } | |
| } | |
| } | |
| #endif |