| /* | |
| * IMX7 System Reset Controller | |
| * | |
| * Copyright (c) 2023 Jean-Christophe Dubois <jcd@tribudubois.net> | |
| * | |
| * This work is licensed under the terms of the GNU GPL, version 2 or later. | |
| * See the COPYING file in the top-level directory. | |
| * | |
| */ | |
| #include "qemu/osdep.h" | |
| #include "hw/misc/imx7_src.h" | |
| #include "migration/vmstate.h" | |
| #include "qemu/bitops.h" | |
| #include "qemu/log.h" | |
| #include "qemu/main-loop.h" | |
| #include "qemu/module.h" | |
| #include "target/arm/arm-powerctl.h" | |
| #include "hw/core/cpu.h" | |
| #include "hw/core/registerfields.h" | |
| #include "trace.h" | |
| static const char *imx7_src_reg_name(uint32_t reg) | |
| { | |
| static char unknown[20]; | |
| switch (reg) { | |
| case SRC_SCR: | |
| return "SRC_SCR"; | |
| case SRC_A7RCR0: | |
| return "SRC_A7RCR0"; | |
| case SRC_A7RCR1: | |
| return "SRC_A7RCR1"; | |
| case SRC_M4RCR: | |
| return "SRC_M4RCR"; | |
| case SRC_ERCR: | |
| return "SRC_ERCR"; | |
| case SRC_HSICPHY_RCR: | |
| return "SRC_HSICPHY_RCR"; | |
| case SRC_USBOPHY1_RCR: | |
| return "SRC_USBOPHY1_RCR"; | |
| case SRC_USBOPHY2_RCR: | |
| return "SRC_USBOPHY2_RCR"; | |
| case SRC_PCIEPHY_RCR: | |
| return "SRC_PCIEPHY_RCR"; | |
| case SRC_SBMR1: | |
| return "SRC_SBMR1"; | |
| case SRC_SRSR: | |
| return "SRC_SRSR"; | |
| case SRC_SISR: | |
| return "SRC_SISR"; | |
| case SRC_SIMR: | |
| return "SRC_SIMR"; | |
| case SRC_SBMR2: | |
| return "SRC_SBMR2"; | |
| case SRC_GPR1: | |
| return "SRC_GPR1"; | |
| case SRC_GPR2: | |
| return "SRC_GPR2"; | |
| case SRC_GPR3: | |
| return "SRC_GPR3"; | |
| case SRC_GPR4: | |
| return "SRC_GPR4"; | |
| case SRC_GPR5: | |
| return "SRC_GPR5"; | |
| case SRC_GPR6: | |
| return "SRC_GPR6"; | |
| case SRC_GPR7: | |
| return "SRC_GPR7"; | |
| case SRC_GPR8: | |
| return "SRC_GPR8"; | |
| case SRC_GPR9: | |
| return "SRC_GPR9"; | |
| case SRC_GPR10: | |
| return "SRC_GPR10"; | |
| default: | |
| snprintf(unknown, sizeof(unknown), "%u ?", reg); | |
| return unknown; | |
| } | |
| } | |
| static const VMStateDescription vmstate_imx7_src = { | |
| .name = TYPE_IMX7_SRC, | |
| .version_id = 1, | |
| .minimum_version_id = 1, | |
| .fields = (const VMStateField[]) { | |
| VMSTATE_UINT32_ARRAY(regs, IMX7SRCState, SRC_MAX), | |
| VMSTATE_END_OF_LIST() | |
| }, | |
| }; | |
| static void imx7_src_reset(DeviceState *dev) | |
| { | |
| IMX7SRCState *s = IMX7_SRC(dev); | |
| memset(s->regs, 0, sizeof(s->regs)); | |
| /* Set reset values */ | |
| s->regs[SRC_SCR] = 0xA0; | |
| s->regs[SRC_SRSR] = 0x1; | |
| s->regs[SRC_SIMR] = 0x1F; | |
| } | |
| static uint64_t imx7_src_read(void *opaque, hwaddr offset, unsigned size) | |
| { | |
| uint32_t value = 0; | |
| IMX7SRCState *s = opaque; | |
| uint32_t index = offset >> 2; | |
| if (index < SRC_MAX) { | |
| value = s->regs[index]; | |
| } else { | |
| qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%" | |
| HWADDR_PRIx "\n", TYPE_IMX7_SRC, __func__, offset); | |
| } | |
| trace_imx7_src_read(imx7_src_reg_name(index), value); | |
| return value; | |
| } | |
| /* | |
| * The reset is asynchronous so we need to defer clearing the reset | |
| * bit until the work is completed. | |
| */ | |
| struct SRCSCRResetInfo { | |
| IMX7SRCState *s; | |
| uint32_t reset_bit; | |
| }; | |
| static void imx7_clear_reset_bit(CPUState *cpu, run_on_cpu_data data) | |
| { | |
| struct SRCSCRResetInfo *ri = data.host_ptr; | |
| IMX7SRCState *s = ri->s; | |
| assert(bql_locked()); | |
| s->regs[SRC_A7RCR0] = deposit32(s->regs[SRC_A7RCR0], ri->reset_bit, 1, 0); | |
| trace_imx7_src_write(imx7_src_reg_name(SRC_A7RCR0), s->regs[SRC_A7RCR0]); | |
| g_free(ri); | |
| } | |
| static void imx7_defer_clear_reset_bit(uint32_t cpuid, | |
| IMX7SRCState *s, | |
| uint32_t reset_shift) | |
| { | |
| struct SRCSCRResetInfo *ri; | |
| CPUState *cpu = arm_get_cpu_by_id(cpuid); | |
| if (!cpu) { | |
| return; | |
| } | |
| ri = g_new(struct SRCSCRResetInfo, 1); | |
| ri->s = s; | |
| ri->reset_bit = reset_shift; | |
| async_run_on_cpu(cpu, imx7_clear_reset_bit, RUN_ON_CPU_HOST_PTR(ri)); | |
| } | |
| static void imx7_src_write(void *opaque, hwaddr offset, uint64_t value, | |
| unsigned size) | |
| { | |
| IMX7SRCState *s = opaque; | |
| uint32_t index = offset >> 2; | |
| long unsigned int change_mask; | |
| uint32_t current_value = value; | |
| if (index >= SRC_MAX) { | |
| qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%" | |
| HWADDR_PRIx "\n", TYPE_IMX7_SRC, __func__, offset); | |
| return; | |
| } | |
| trace_imx7_src_write(imx7_src_reg_name(SRC_A7RCR0), s->regs[SRC_A7RCR0]); | |
| change_mask = s->regs[index] ^ (uint32_t)current_value; | |
| switch (index) { | |
| case SRC_A7RCR0: | |
| if (FIELD_EX32(change_mask, CORE0, RST)) { | |
| arm_reset_cpu(0); | |
| imx7_defer_clear_reset_bit(0, s, R_CORE0_RST_SHIFT); | |
| } | |
| if (FIELD_EX32(change_mask, CORE1, RST)) { | |
| arm_reset_cpu(1); | |
| imx7_defer_clear_reset_bit(1, s, R_CORE1_RST_SHIFT); | |
| } | |
| s->regs[index] = current_value; | |
| break; | |
| case SRC_A7RCR1: | |
| /* | |
| * On real hardware when the system reset controller starts a | |
| * secondary CPU it runs through some boot ROM code which reads | |
| * the SRC_GPRX registers controlling the start address and branches | |
| * to it. | |
| * Here we are taking a short cut and branching directly to the | |
| * requested address (we don't want to run the boot ROM code inside | |
| * QEMU) | |
| */ | |
| if (FIELD_EX32(change_mask, CORE1, ENABLE)) { | |
| if (FIELD_EX32(current_value, CORE1, ENABLE)) { | |
| /* CORE 1 is brought up */ | |
| arm_set_cpu_on(1, s->regs[SRC_GPR3], s->regs[SRC_GPR4], | |
| 3, false); | |
| } else { | |
| /* CORE 1 is shut down */ | |
| arm_set_cpu_off(1); | |
| } | |
| /* We clear the reset bits as the processor changed state */ | |
| imx7_defer_clear_reset_bit(1, s, R_CORE1_RST_SHIFT); | |
| clear_bit(R_CORE1_RST_SHIFT, &change_mask); | |
| } | |
| s->regs[index] = current_value; | |
| break; | |
| default: | |
| s->regs[index] = current_value; | |
| break; | |
| } | |
| } | |
| static const struct MemoryRegionOps imx7_src_ops = { | |
| .read = imx7_src_read, | |
| .write = imx7_src_write, | |
| .endianness = DEVICE_NATIVE_ENDIAN, | |
| .valid = { | |
| /* | |
| * Our device would not work correctly if the guest was doing | |
| * unaligned access. This might not be a limitation on the real | |
| * device but in practice there is no reason for a guest to access | |
| * this device unaligned. | |
| */ | |
| .min_access_size = 4, | |
| .max_access_size = 4, | |
| .unaligned = false, | |
| }, | |
| }; | |
| static void imx7_src_realize(DeviceState *dev, Error **errp) | |
| { | |
| IMX7SRCState *s = IMX7_SRC(dev); | |
| memory_region_init_io(&s->iomem, OBJECT(dev), &imx7_src_ops, s, | |
| TYPE_IMX7_SRC, 0x1000); | |
| sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->iomem); | |
| } | |
| static void imx7_src_class_init(ObjectClass *klass, const void *data) | |
| { | |
| DeviceClass *dc = DEVICE_CLASS(klass); | |
| dc->realize = imx7_src_realize; | |
| device_class_set_legacy_reset(dc, imx7_src_reset); | |
| dc->vmsd = &vmstate_imx7_src; | |
| dc->desc = "i.MX6 System Reset Controller"; | |
| } | |
| static const TypeInfo imx7_src_info = { | |
| .name = TYPE_IMX7_SRC, | |
| .parent = TYPE_SYS_BUS_DEVICE, | |
| .instance_size = sizeof(IMX7SRCState), | |
| .class_init = imx7_src_class_init, | |
| }; | |
| static void imx7_src_register_types(void) | |
| { | |
| type_register_static(&imx7_src_info); | |
| } | |
| type_init(imx7_src_register_types) |