| /* |
| * Samsung exynos4210 SoC emulation |
| * |
| * Copyright (c) 2011 Samsung Electronics Co., Ltd. All rights reserved. |
| * Maksim Kozlov <m.kozlov@samsung.com> |
| * Evgeny Voevodin <e.voevodin@samsung.com> |
| * Igor Mitsyanko <i.mitsyanko@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, see <http://www.gnu.org/licenses/>. |
| * |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qapi/error.h" |
| #include "cpu.h" |
| #include "hw/cpu/a9mpcore.h" |
| #include "hw/irq.h" |
| #include "sysemu/blockdev.h" |
| #include "sysemu/sysemu.h" |
| #include "hw/sysbus.h" |
| #include "hw/arm/boot.h" |
| #include "hw/loader.h" |
| #include "hw/qdev-properties.h" |
| #include "hw/arm/exynos4210.h" |
| #include "hw/sd/sdhci.h" |
| #include "hw/usb/hcd-ehci.h" |
| |
| #define EXYNOS4210_CHIPID_ADDR 0x10000000 |
| |
| /* PWM */ |
| #define EXYNOS4210_PWM_BASE_ADDR 0x139D0000 |
| |
| /* RTC */ |
| #define EXYNOS4210_RTC_BASE_ADDR 0x10070000 |
| |
| /* MCT */ |
| #define EXYNOS4210_MCT_BASE_ADDR 0x10050000 |
| |
| /* I2C */ |
| #define EXYNOS4210_I2C_SHIFT 0x00010000 |
| #define EXYNOS4210_I2C_BASE_ADDR 0x13860000 |
| /* Interrupt Group of External Interrupt Combiner for I2C */ |
| #define EXYNOS4210_I2C_INTG 27 |
| #define EXYNOS4210_HDMI_INTG 16 |
| |
| /* UART's definitions */ |
| #define EXYNOS4210_UART0_BASE_ADDR 0x13800000 |
| #define EXYNOS4210_UART1_BASE_ADDR 0x13810000 |
| #define EXYNOS4210_UART2_BASE_ADDR 0x13820000 |
| #define EXYNOS4210_UART3_BASE_ADDR 0x13830000 |
| #define EXYNOS4210_UART0_FIFO_SIZE 256 |
| #define EXYNOS4210_UART1_FIFO_SIZE 64 |
| #define EXYNOS4210_UART2_FIFO_SIZE 16 |
| #define EXYNOS4210_UART3_FIFO_SIZE 16 |
| /* Interrupt Group of External Interrupt Combiner for UART */ |
| #define EXYNOS4210_UART_INT_GRP 26 |
| |
| /* External GIC */ |
| #define EXYNOS4210_EXT_GIC_CPU_BASE_ADDR 0x10480000 |
| #define EXYNOS4210_EXT_GIC_DIST_BASE_ADDR 0x10490000 |
| |
| /* Combiner */ |
| #define EXYNOS4210_EXT_COMBINER_BASE_ADDR 0x10440000 |
| #define EXYNOS4210_INT_COMBINER_BASE_ADDR 0x10448000 |
| |
| /* SD/MMC host controllers */ |
| #define EXYNOS4210_SDHCI_CAPABILITIES 0x05E80080 |
| #define EXYNOS4210_SDHCI_BASE_ADDR 0x12510000 |
| #define EXYNOS4210_SDHCI_ADDR(n) (EXYNOS4210_SDHCI_BASE_ADDR + \ |
| 0x00010000 * (n)) |
| #define EXYNOS4210_SDHCI_NUMBER 4 |
| |
| /* PMU SFR base address */ |
| #define EXYNOS4210_PMU_BASE_ADDR 0x10020000 |
| |
| /* Clock controller SFR base address */ |
| #define EXYNOS4210_CLK_BASE_ADDR 0x10030000 |
| |
| /* PRNG/HASH SFR base address */ |
| #define EXYNOS4210_RNG_BASE_ADDR 0x10830400 |
| |
| /* Display controllers (FIMD) */ |
| #define EXYNOS4210_FIMD0_BASE_ADDR 0x11C00000 |
| |
| /* EHCI */ |
| #define EXYNOS4210_EHCI_BASE_ADDR 0x12580000 |
| |
| /* DMA */ |
| #define EXYNOS4210_PL330_BASE0_ADDR 0x12680000 |
| #define EXYNOS4210_PL330_BASE1_ADDR 0x12690000 |
| #define EXYNOS4210_PL330_BASE2_ADDR 0x12850000 |
| |
| enum ExtGicId { |
| EXT_GIC_ID_MDMA_LCD0 = 66, |
| EXT_GIC_ID_PDMA0, |
| EXT_GIC_ID_PDMA1, |
| EXT_GIC_ID_TIMER0, |
| EXT_GIC_ID_TIMER1, |
| EXT_GIC_ID_TIMER2, |
| EXT_GIC_ID_TIMER3, |
| EXT_GIC_ID_TIMER4, |
| EXT_GIC_ID_MCT_L0, |
| EXT_GIC_ID_WDT, |
| EXT_GIC_ID_RTC_ALARM, |
| EXT_GIC_ID_RTC_TIC, |
| EXT_GIC_ID_GPIO_XB, |
| EXT_GIC_ID_GPIO_XA, |
| EXT_GIC_ID_MCT_L1, |
| EXT_GIC_ID_IEM_APC, |
| EXT_GIC_ID_IEM_IEC, |
| EXT_GIC_ID_NFC, |
| EXT_GIC_ID_UART0, |
| EXT_GIC_ID_UART1, |
| EXT_GIC_ID_UART2, |
| EXT_GIC_ID_UART3, |
| EXT_GIC_ID_UART4, |
| EXT_GIC_ID_MCT_G0, |
| EXT_GIC_ID_I2C0, |
| EXT_GIC_ID_I2C1, |
| EXT_GIC_ID_I2C2, |
| EXT_GIC_ID_I2C3, |
| EXT_GIC_ID_I2C4, |
| EXT_GIC_ID_I2C5, |
| EXT_GIC_ID_I2C6, |
| EXT_GIC_ID_I2C7, |
| EXT_GIC_ID_SPI0, |
| EXT_GIC_ID_SPI1, |
| EXT_GIC_ID_SPI2, |
| EXT_GIC_ID_MCT_G1, |
| EXT_GIC_ID_USB_HOST, |
| EXT_GIC_ID_USB_DEVICE, |
| EXT_GIC_ID_MODEMIF, |
| EXT_GIC_ID_HSMMC0, |
| EXT_GIC_ID_HSMMC1, |
| EXT_GIC_ID_HSMMC2, |
| EXT_GIC_ID_HSMMC3, |
| EXT_GIC_ID_SDMMC, |
| EXT_GIC_ID_MIPI_CSI_4LANE, |
| EXT_GIC_ID_MIPI_DSI_4LANE, |
| EXT_GIC_ID_MIPI_CSI_2LANE, |
| EXT_GIC_ID_MIPI_DSI_2LANE, |
| EXT_GIC_ID_ONENAND_AUDI, |
| EXT_GIC_ID_ROTATOR, |
| EXT_GIC_ID_FIMC0, |
| EXT_GIC_ID_FIMC1, |
| EXT_GIC_ID_FIMC2, |
| EXT_GIC_ID_FIMC3, |
| EXT_GIC_ID_JPEG, |
| EXT_GIC_ID_2D, |
| EXT_GIC_ID_PCIe, |
| EXT_GIC_ID_MIXER, |
| EXT_GIC_ID_HDMI, |
| EXT_GIC_ID_HDMI_I2C, |
| EXT_GIC_ID_MFC, |
| EXT_GIC_ID_TVENC, |
| }; |
| |
| enum ExtInt { |
| EXT_GIC_ID_EXTINT0 = 48, |
| EXT_GIC_ID_EXTINT1, |
| EXT_GIC_ID_EXTINT2, |
| EXT_GIC_ID_EXTINT3, |
| EXT_GIC_ID_EXTINT4, |
| EXT_GIC_ID_EXTINT5, |
| EXT_GIC_ID_EXTINT6, |
| EXT_GIC_ID_EXTINT7, |
| EXT_GIC_ID_EXTINT8, |
| EXT_GIC_ID_EXTINT9, |
| EXT_GIC_ID_EXTINT10, |
| EXT_GIC_ID_EXTINT11, |
| EXT_GIC_ID_EXTINT12, |
| EXT_GIC_ID_EXTINT13, |
| EXT_GIC_ID_EXTINT14, |
| EXT_GIC_ID_EXTINT15 |
| }; |
| |
| /* |
| * External GIC sources which are not from External Interrupt Combiner or |
| * External Interrupts are starting from EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ, |
| * which is INTG16 in Internal Interrupt Combiner. |
| */ |
| |
| static const uint32_t |
| combiner_grp_to_gic_id[64 - EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][8] = { |
| /* int combiner groups 16-19 */ |
| { }, { }, { }, { }, |
| /* int combiner group 20 */ |
| { 0, EXT_GIC_ID_MDMA_LCD0 }, |
| /* int combiner group 21 */ |
| { EXT_GIC_ID_PDMA0, EXT_GIC_ID_PDMA1 }, |
| /* int combiner group 22 */ |
| { EXT_GIC_ID_TIMER0, EXT_GIC_ID_TIMER1, EXT_GIC_ID_TIMER2, |
| EXT_GIC_ID_TIMER3, EXT_GIC_ID_TIMER4 }, |
| /* int combiner group 23 */ |
| { EXT_GIC_ID_RTC_ALARM, EXT_GIC_ID_RTC_TIC }, |
| /* int combiner group 24 */ |
| { EXT_GIC_ID_GPIO_XB, EXT_GIC_ID_GPIO_XA }, |
| /* int combiner group 25 */ |
| { EXT_GIC_ID_IEM_APC, EXT_GIC_ID_IEM_IEC }, |
| /* int combiner group 26 */ |
| { EXT_GIC_ID_UART0, EXT_GIC_ID_UART1, EXT_GIC_ID_UART2, EXT_GIC_ID_UART3, |
| EXT_GIC_ID_UART4 }, |
| /* int combiner group 27 */ |
| { EXT_GIC_ID_I2C0, EXT_GIC_ID_I2C1, EXT_GIC_ID_I2C2, EXT_GIC_ID_I2C3, |
| EXT_GIC_ID_I2C4, EXT_GIC_ID_I2C5, EXT_GIC_ID_I2C6, |
| EXT_GIC_ID_I2C7 }, |
| /* int combiner group 28 */ |
| { EXT_GIC_ID_SPI0, EXT_GIC_ID_SPI1, EXT_GIC_ID_SPI2 , EXT_GIC_ID_USB_HOST}, |
| /* int combiner group 29 */ |
| { EXT_GIC_ID_HSMMC0, EXT_GIC_ID_HSMMC1, EXT_GIC_ID_HSMMC2, |
| EXT_GIC_ID_HSMMC3, EXT_GIC_ID_SDMMC }, |
| /* int combiner group 30 */ |
| { EXT_GIC_ID_MIPI_CSI_4LANE, EXT_GIC_ID_MIPI_CSI_2LANE }, |
| /* int combiner group 31 */ |
| { EXT_GIC_ID_MIPI_DSI_4LANE, EXT_GIC_ID_MIPI_DSI_2LANE }, |
| /* int combiner group 32 */ |
| { EXT_GIC_ID_FIMC0, EXT_GIC_ID_FIMC1 }, |
| /* int combiner group 33 */ |
| { EXT_GIC_ID_FIMC2, EXT_GIC_ID_FIMC3 }, |
| /* int combiner group 34 */ |
| { EXT_GIC_ID_ONENAND_AUDI, EXT_GIC_ID_NFC }, |
| /* int combiner group 35 */ |
| { 0, 0, 0, EXT_GIC_ID_MCT_L1 }, |
| /* int combiner group 36 */ |
| { EXT_GIC_ID_MIXER }, |
| /* int combiner group 37 */ |
| { EXT_GIC_ID_EXTINT4, EXT_GIC_ID_EXTINT5, EXT_GIC_ID_EXTINT6, |
| EXT_GIC_ID_EXTINT7 }, |
| /* groups 38-50 */ |
| { }, { }, { }, { }, { }, { }, { }, { }, { }, { }, { }, { }, { }, |
| /* int combiner group 51 */ |
| { EXT_GIC_ID_MCT_L0 }, |
| /* group 52 */ |
| { }, |
| /* int combiner group 53 */ |
| { EXT_GIC_ID_WDT }, |
| /* groups 54-63 */ |
| { }, { }, { }, { }, { }, { }, { }, { }, { }, { } |
| }; |
| |
| #define EXYNOS4210_COMBINER_GET_IRQ_NUM(grp, bit) ((grp) * 8 + (bit)) |
| #define EXYNOS4210_COMBINER_GET_GRP_NUM(irq) ((irq) / 8) |
| #define EXYNOS4210_COMBINER_GET_BIT_NUM(irq) \ |
| ((irq) - 8 * EXYNOS4210_COMBINER_GET_GRP_NUM(irq)) |
| |
| /* |
| * Some interrupt lines go to multiple combiner inputs. |
| * This data structure defines those: each array element is |
| * a list of combiner inputs which are connected together; |
| * the one with the smallest interrupt ID value must be first. |
| * As with combiner_grp_to_gic_id[], we rely on (0, 0) not being |
| * wired to anything so we can use 0 as a terminator. |
| */ |
| #define IRQNO(G, B) EXYNOS4210_COMBINER_GET_IRQ_NUM(G, B) |
| #define IRQNONE 0 |
| |
| #define COMBINERMAP_SIZE 16 |
| |
| static const int combinermap[COMBINERMAP_SIZE][6] = { |
| /* MDNIE_LCD1 */ |
| { IRQNO(0, 4), IRQNO(1, 0), IRQNONE }, |
| { IRQNO(0, 5), IRQNO(1, 1), IRQNONE }, |
| { IRQNO(0, 6), IRQNO(1, 2), IRQNONE }, |
| { IRQNO(0, 7), IRQNO(1, 3), IRQNONE }, |
| /* TMU */ |
| { IRQNO(2, 4), IRQNO(3, 4), IRQNONE }, |
| { IRQNO(2, 5), IRQNO(3, 5), IRQNONE }, |
| { IRQNO(2, 6), IRQNO(3, 6), IRQNONE }, |
| { IRQNO(2, 7), IRQNO(3, 7), IRQNONE }, |
| /* LCD1 */ |
| { IRQNO(11, 4), IRQNO(12, 0), IRQNONE }, |
| { IRQNO(11, 5), IRQNO(12, 1), IRQNONE }, |
| { IRQNO(11, 6), IRQNO(12, 2), IRQNONE }, |
| { IRQNO(11, 7), IRQNO(12, 3), IRQNONE }, |
| /* Multi-core timer */ |
| { IRQNO(1, 4), IRQNO(12, 4), IRQNO(35, 4), IRQNO(51, 4), IRQNO(53, 4), IRQNONE }, |
| { IRQNO(1, 5), IRQNO(12, 5), IRQNO(35, 5), IRQNO(51, 5), IRQNO(53, 5), IRQNONE }, |
| { IRQNO(1, 6), IRQNO(12, 6), IRQNO(35, 6), IRQNO(51, 6), IRQNO(53, 6), IRQNONE }, |
| { IRQNO(1, 7), IRQNO(12, 7), IRQNO(35, 7), IRQNO(51, 7), IRQNO(53, 7), IRQNONE }, |
| }; |
| |
| #undef IRQNO |
| |
| static const int *combinermap_entry(int irq) |
| { |
| /* |
| * If the interrupt number passed in is the first entry in some |
| * line of the combinermap, return a pointer to that line; |
| * otherwise return NULL. |
| */ |
| int i; |
| for (i = 0; i < COMBINERMAP_SIZE; i++) { |
| if (combinermap[i][0] == irq) { |
| return combinermap[i]; |
| } |
| } |
| return NULL; |
| } |
| |
| static int mapline_size(const int *mapline) |
| { |
| /* Return number of entries in this mapline in total */ |
| int i = 0; |
| |
| if (!mapline) { |
| /* Not in the map? IRQ goes to exactly one combiner input */ |
| return 1; |
| } |
| while (*mapline != IRQNONE) { |
| mapline++; |
| i++; |
| } |
| return i; |
| } |
| |
| /* |
| * Initialize board IRQs. |
| * These IRQs contain split Int/External Combiner and External Gic IRQs. |
| */ |
| static void exynos4210_init_board_irqs(Exynos4210State *s) |
| { |
| uint32_t grp, bit, irq_id, n; |
| DeviceState *extgicdev = DEVICE(&s->ext_gic); |
| DeviceState *intcdev = DEVICE(&s->int_combiner); |
| DeviceState *extcdev = DEVICE(&s->ext_combiner); |
| int splitcount = 0; |
| DeviceState *splitter; |
| const int *mapline; |
| int numlines, splitin, in; |
| |
| for (n = 0; n < EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ; n++) { |
| irq_id = 0; |
| if (n == EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 4)) { |
| /* MCT_G0 is passed to External GIC */ |
| irq_id = EXT_GIC_ID_MCT_G0; |
| } |
| if (n == EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 5)) { |
| /* MCT_G1 is passed to External and GIC */ |
| irq_id = EXT_GIC_ID_MCT_G1; |
| } |
| |
| if (s->irq_table[n]) { |
| /* |
| * This must be some non-first entry in a combinermap line, |
| * and we've already filled it in. |
| */ |
| continue; |
| } |
| mapline = combinermap_entry(n); |
| /* |
| * We need to connect the IRQ to multiple inputs on both combiners |
| * and possibly also to the external GIC. |
| */ |
| numlines = 2 * mapline_size(mapline); |
| if (irq_id) { |
| numlines++; |
| } |
| assert(splitcount < EXYNOS4210_NUM_SPLITTERS); |
| splitter = DEVICE(&s->splitter[splitcount]); |
| qdev_prop_set_uint16(splitter, "num-lines", numlines); |
| qdev_realize(splitter, NULL, &error_abort); |
| splitcount++; |
| |
| in = n; |
| splitin = 0; |
| for (;;) { |
| s->irq_table[in] = qdev_get_gpio_in(splitter, 0); |
| qdev_connect_gpio_out(splitter, splitin, |
| qdev_get_gpio_in(intcdev, in)); |
| qdev_connect_gpio_out(splitter, splitin + 1, |
| qdev_get_gpio_in(extcdev, in)); |
| splitin += 2; |
| if (!mapline) { |
| break; |
| } |
| mapline++; |
| in = *mapline; |
| if (in == IRQNONE) { |
| break; |
| } |
| } |
| if (irq_id) { |
| qdev_connect_gpio_out(splitter, splitin, |
| qdev_get_gpio_in(extgicdev, irq_id - 32)); |
| } |
| } |
| for (; n < EXYNOS4210_MAX_INT_COMBINER_IN_IRQ; n++) { |
| /* these IDs are passed to Internal Combiner and External GIC */ |
| grp = EXYNOS4210_COMBINER_GET_GRP_NUM(n); |
| bit = EXYNOS4210_COMBINER_GET_BIT_NUM(n); |
| irq_id = combiner_grp_to_gic_id[grp - |
| EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][bit]; |
| |
| if (s->irq_table[n]) { |
| /* |
| * This must be some non-first entry in a combinermap line, |
| * and we've already filled it in. |
| */ |
| continue; |
| } |
| |
| if (irq_id) { |
| assert(splitcount < EXYNOS4210_NUM_SPLITTERS); |
| splitter = DEVICE(&s->splitter[splitcount]); |
| qdev_prop_set_uint16(splitter, "num-lines", 2); |
| qdev_realize(splitter, NULL, &error_abort); |
| splitcount++; |
| s->irq_table[n] = qdev_get_gpio_in(splitter, 0); |
| qdev_connect_gpio_out(splitter, 0, qdev_get_gpio_in(intcdev, n)); |
| qdev_connect_gpio_out(splitter, 1, |
| qdev_get_gpio_in(extgicdev, irq_id - 32)); |
| } else { |
| s->irq_table[n] = qdev_get_gpio_in(intcdev, n); |
| } |
| } |
| /* |
| * We check this here to avoid a more obscure assert later when |
| * qdev_assert_realized_properly() checks that we realized every |
| * child object we initialized. |
| */ |
| assert(splitcount == EXYNOS4210_NUM_SPLITTERS); |
| } |
| |
| /* |
| * Get IRQ number from exynos4210 IRQ subsystem stub. |
| * To identify IRQ source use internal combiner group and bit number |
| * grp - group number |
| * bit - bit number inside group |
| */ |
| uint32_t exynos4210_get_irq(uint32_t grp, uint32_t bit) |
| { |
| return EXYNOS4210_COMBINER_GET_IRQ_NUM(grp, bit); |
| } |
| |
| static uint8_t chipid_and_omr[] = { 0x11, 0x02, 0x21, 0x43, |
| 0x09, 0x00, 0x00, 0x00 }; |
| |
| static uint64_t exynos4210_chipid_and_omr_read(void *opaque, hwaddr offset, |
| unsigned size) |
| { |
| assert(offset < sizeof(chipid_and_omr)); |
| return chipid_and_omr[offset]; |
| } |
| |
| static void exynos4210_chipid_and_omr_write(void *opaque, hwaddr offset, |
| uint64_t value, unsigned size) |
| { |
| return; |
| } |
| |
| static const MemoryRegionOps exynos4210_chipid_and_omr_ops = { |
| .read = exynos4210_chipid_and_omr_read, |
| .write = exynos4210_chipid_and_omr_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| .impl = { |
| .max_access_size = 1, |
| } |
| }; |
| |
| void exynos4210_write_secondary(ARMCPU *cpu, |
| const struct arm_boot_info *info) |
| { |
| int n; |
| uint32_t smpboot[] = { |
| 0xe59f3034, /* ldr r3, External gic_cpu_if */ |
| 0xe59f2034, /* ldr r2, Internal gic_cpu_if */ |
| 0xe59f0034, /* ldr r0, startaddr */ |
| 0xe3a01001, /* mov r1, #1 */ |
| 0xe5821000, /* str r1, [r2] */ |
| 0xe5831000, /* str r1, [r3] */ |
| 0xe3a010ff, /* mov r1, #0xff */ |
| 0xe5821004, /* str r1, [r2, #4] */ |
| 0xe5831004, /* str r1, [r3, #4] */ |
| 0xf57ff04f, /* dsb */ |
| 0xe320f003, /* wfi */ |
| 0xe5901000, /* ldr r1, [r0] */ |
| 0xe1110001, /* tst r1, r1 */ |
| 0x0afffffb, /* beq <wfi> */ |
| 0xe12fff11, /* bx r1 */ |
| EXYNOS4210_EXT_GIC_CPU_BASE_ADDR, |
| 0, /* gic_cpu_if: base address of Internal GIC CPU interface */ |
| 0 /* bootreg: Boot register address is held here */ |
| }; |
| smpboot[ARRAY_SIZE(smpboot) - 1] = info->smp_bootreg_addr; |
| smpboot[ARRAY_SIZE(smpboot) - 2] = info->gic_cpu_if_addr; |
| for (n = 0; n < ARRAY_SIZE(smpboot); n++) { |
| smpboot[n] = tswap32(smpboot[n]); |
| } |
| rom_add_blob_fixed("smpboot", smpboot, sizeof(smpboot), |
| info->smp_loader_start); |
| } |
| |
| static uint64_t exynos4210_calc_affinity(int cpu) |
| { |
| /* Exynos4210 has 0x9 as cluster ID */ |
| return (0x9 << ARM_AFF1_SHIFT) | cpu; |
| } |
| |
| static DeviceState *pl330_create(uint32_t base, OrIRQState *orgate, |
| qemu_irq irq, int nreq, int nevents, int width) |
| { |
| SysBusDevice *busdev; |
| DeviceState *dev; |
| int i; |
| |
| dev = qdev_new("pl330"); |
| object_property_set_link(OBJECT(dev), "memory", |
| OBJECT(get_system_memory()), |
| &error_fatal); |
| qdev_prop_set_uint8(dev, "num_events", nevents); |
| qdev_prop_set_uint8(dev, "num_chnls", 8); |
| qdev_prop_set_uint8(dev, "num_periph_req", nreq); |
| |
| qdev_prop_set_uint8(dev, "wr_cap", 4); |
| qdev_prop_set_uint8(dev, "wr_q_dep", 8); |
| qdev_prop_set_uint8(dev, "rd_cap", 4); |
| qdev_prop_set_uint8(dev, "rd_q_dep", 8); |
| qdev_prop_set_uint8(dev, "data_width", width); |
| qdev_prop_set_uint16(dev, "data_buffer_dep", width); |
| busdev = SYS_BUS_DEVICE(dev); |
| sysbus_realize_and_unref(busdev, &error_fatal); |
| sysbus_mmio_map(busdev, 0, base); |
| |
| object_property_set_int(OBJECT(orgate), "num-lines", nevents + 1, |
| &error_abort); |
| qdev_realize(DEVICE(orgate), NULL, &error_abort); |
| |
| for (i = 0; i < nevents + 1; i++) { |
| sysbus_connect_irq(busdev, i, qdev_get_gpio_in(DEVICE(orgate), i)); |
| } |
| qdev_connect_gpio_out(DEVICE(orgate), 0, irq); |
| return dev; |
| } |
| |
| static void exynos4210_realize(DeviceState *socdev, Error **errp) |
| { |
| Exynos4210State *s = EXYNOS4210_SOC(socdev); |
| MemoryRegion *system_mem = get_system_memory(); |
| SysBusDevice *busdev; |
| DeviceState *dev, *uart[4], *pl330[3]; |
| int i, n; |
| |
| for (n = 0; n < EXYNOS4210_NCPUS; n++) { |
| Object *cpuobj = object_new(ARM_CPU_TYPE_NAME("cortex-a9")); |
| |
| /* By default A9 CPUs have EL3 enabled. This board does not currently |
| * support EL3 so the CPU EL3 property is disabled before realization. |
| */ |
| if (object_property_find(cpuobj, "has_el3")) { |
| object_property_set_bool(cpuobj, "has_el3", false, &error_fatal); |
| } |
| |
| s->cpu[n] = ARM_CPU(cpuobj); |
| object_property_set_int(cpuobj, "mp-affinity", |
| exynos4210_calc_affinity(n), &error_abort); |
| object_property_set_int(cpuobj, "reset-cbar", |
| EXYNOS4210_SMP_PRIVATE_BASE_ADDR, |
| &error_abort); |
| qdev_realize(DEVICE(cpuobj), NULL, &error_fatal); |
| } |
| |
| /* IRQ Gate */ |
| for (i = 0; i < EXYNOS4210_NCPUS; i++) { |
| DeviceState *orgate = DEVICE(&s->cpu_irq_orgate[i]); |
| object_property_set_int(OBJECT(orgate), "num-lines", |
| EXYNOS4210_IRQ_GATE_NINPUTS, |
| &error_abort); |
| qdev_realize(orgate, NULL, &error_abort); |
| qdev_connect_gpio_out(orgate, 0, |
| qdev_get_gpio_in(DEVICE(s->cpu[i]), ARM_CPU_IRQ)); |
| } |
| |
| /* Private memory region and Internal GIC */ |
| qdev_prop_set_uint32(DEVICE(&s->a9mpcore), "num-cpu", EXYNOS4210_NCPUS); |
| busdev = SYS_BUS_DEVICE(&s->a9mpcore); |
| sysbus_realize(busdev, &error_fatal); |
| sysbus_mmio_map(busdev, 0, EXYNOS4210_SMP_PRIVATE_BASE_ADDR); |
| for (n = 0; n < EXYNOS4210_NCPUS; n++) { |
| sysbus_connect_irq(busdev, n, |
| qdev_get_gpio_in(DEVICE(&s->cpu_irq_orgate[n]), 0)); |
| } |
| |
| /* Cache controller */ |
| sysbus_create_simple("l2x0", EXYNOS4210_L2X0_BASE_ADDR, NULL); |
| |
| /* External GIC */ |
| qdev_prop_set_uint32(DEVICE(&s->ext_gic), "num-cpu", EXYNOS4210_NCPUS); |
| busdev = SYS_BUS_DEVICE(&s->ext_gic); |
| sysbus_realize(busdev, &error_fatal); |
| /* Map CPU interface */ |
| sysbus_mmio_map(busdev, 0, EXYNOS4210_EXT_GIC_CPU_BASE_ADDR); |
| /* Map Distributer interface */ |
| sysbus_mmio_map(busdev, 1, EXYNOS4210_EXT_GIC_DIST_BASE_ADDR); |
| for (n = 0; n < EXYNOS4210_NCPUS; n++) { |
| sysbus_connect_irq(busdev, n, |
| qdev_get_gpio_in(DEVICE(&s->cpu_irq_orgate[n]), 1)); |
| } |
| |
| /* Internal Interrupt Combiner */ |
| busdev = SYS_BUS_DEVICE(&s->int_combiner); |
| sysbus_realize(busdev, &error_fatal); |
| for (n = 0; n < EXYNOS4210_MAX_INT_COMBINER_OUT_IRQ; n++) { |
| sysbus_connect_irq(busdev, n, |
| qdev_get_gpio_in(DEVICE(&s->a9mpcore), n)); |
| } |
| sysbus_mmio_map(busdev, 0, EXYNOS4210_INT_COMBINER_BASE_ADDR); |
| |
| /* External Interrupt Combiner */ |
| qdev_prop_set_uint32(DEVICE(&s->ext_combiner), "external", 1); |
| busdev = SYS_BUS_DEVICE(&s->ext_combiner); |
| sysbus_realize(busdev, &error_fatal); |
| for (n = 0; n < EXYNOS4210_MAX_INT_COMBINER_OUT_IRQ; n++) { |
| sysbus_connect_irq(busdev, n, qdev_get_gpio_in(DEVICE(&s->ext_gic), n)); |
| } |
| sysbus_mmio_map(busdev, 0, EXYNOS4210_EXT_COMBINER_BASE_ADDR); |
| |
| /* Initialize board IRQs. */ |
| exynos4210_init_board_irqs(s); |
| |
| /*** Memory ***/ |
| |
| /* Chip-ID and OMR */ |
| memory_region_init_io(&s->chipid_mem, OBJECT(socdev), |
| &exynos4210_chipid_and_omr_ops, NULL, |
| "exynos4210.chipid", sizeof(chipid_and_omr)); |
| memory_region_add_subregion(system_mem, EXYNOS4210_CHIPID_ADDR, |
| &s->chipid_mem); |
| |
| /* Internal ROM */ |
| memory_region_init_rom(&s->irom_mem, OBJECT(socdev), "exynos4210.irom", |
| EXYNOS4210_IROM_SIZE, &error_fatal); |
| memory_region_add_subregion(system_mem, EXYNOS4210_IROM_BASE_ADDR, |
| &s->irom_mem); |
| /* mirror of iROM */ |
| memory_region_init_alias(&s->irom_alias_mem, OBJECT(socdev), |
| "exynos4210.irom_alias", &s->irom_mem, 0, |
| EXYNOS4210_IROM_SIZE); |
| memory_region_add_subregion(system_mem, EXYNOS4210_IROM_MIRROR_BASE_ADDR, |
| &s->irom_alias_mem); |
| |
| /* Internal RAM */ |
| memory_region_init_ram(&s->iram_mem, NULL, "exynos4210.iram", |
| EXYNOS4210_IRAM_SIZE, &error_fatal); |
| memory_region_add_subregion(system_mem, EXYNOS4210_IRAM_BASE_ADDR, |
| &s->iram_mem); |
| |
| /* PMU. |
| * The only reason of existence at the moment is that secondary CPU boot |
| * loader uses PMU INFORM5 register as a holding pen. |
| */ |
| sysbus_create_simple("exynos4210.pmu", EXYNOS4210_PMU_BASE_ADDR, NULL); |
| |
| sysbus_create_simple("exynos4210.clk", EXYNOS4210_CLK_BASE_ADDR, NULL); |
| sysbus_create_simple("exynos4210.rng", EXYNOS4210_RNG_BASE_ADDR, NULL); |
| |
| /* PWM */ |
| sysbus_create_varargs("exynos4210.pwm", EXYNOS4210_PWM_BASE_ADDR, |
| s->irq_table[exynos4210_get_irq(22, 0)], |
| s->irq_table[exynos4210_get_irq(22, 1)], |
| s->irq_table[exynos4210_get_irq(22, 2)], |
| s->irq_table[exynos4210_get_irq(22, 3)], |
| s->irq_table[exynos4210_get_irq(22, 4)], |
| NULL); |
| /* RTC */ |
| sysbus_create_varargs("exynos4210.rtc", EXYNOS4210_RTC_BASE_ADDR, |
| s->irq_table[exynos4210_get_irq(23, 0)], |
| s->irq_table[exynos4210_get_irq(23, 1)], |
| NULL); |
| |
| /* Multi Core Timer */ |
| dev = qdev_new("exynos4210.mct"); |
| busdev = SYS_BUS_DEVICE(dev); |
| sysbus_realize_and_unref(busdev, &error_fatal); |
| for (n = 0; n < 4; n++) { |
| /* Connect global timer interrupts to Combiner gpio_in */ |
| sysbus_connect_irq(busdev, n, |
| s->irq_table[exynos4210_get_irq(1, 4 + n)]); |
| } |
| /* Connect local timer interrupts to Combiner gpio_in */ |
| sysbus_connect_irq(busdev, 4, |
| s->irq_table[exynos4210_get_irq(51, 0)]); |
| sysbus_connect_irq(busdev, 5, |
| s->irq_table[exynos4210_get_irq(35, 3)]); |
| sysbus_mmio_map(busdev, 0, EXYNOS4210_MCT_BASE_ADDR); |
| |
| /*** I2C ***/ |
| for (n = 0; n < EXYNOS4210_I2C_NUMBER; n++) { |
| uint32_t addr = EXYNOS4210_I2C_BASE_ADDR + EXYNOS4210_I2C_SHIFT * n; |
| qemu_irq i2c_irq; |
| |
| if (n < 8) { |
| i2c_irq = s->irq_table[exynos4210_get_irq(EXYNOS4210_I2C_INTG, n)]; |
| } else { |
| i2c_irq = s->irq_table[exynos4210_get_irq(EXYNOS4210_HDMI_INTG, 1)]; |
| } |
| |
| dev = qdev_new("exynos4210.i2c"); |
| busdev = SYS_BUS_DEVICE(dev); |
| sysbus_realize_and_unref(busdev, &error_fatal); |
| sysbus_connect_irq(busdev, 0, i2c_irq); |
| sysbus_mmio_map(busdev, 0, addr); |
| s->i2c_if[n] = (I2CBus *)qdev_get_child_bus(dev, "i2c"); |
| } |
| |
| |
| /*** UARTs ***/ |
| uart[0] = exynos4210_uart_create(EXYNOS4210_UART0_BASE_ADDR, |
| EXYNOS4210_UART0_FIFO_SIZE, 0, serial_hd(0), |
| s->irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 0)]); |
| |
| uart[1] = exynos4210_uart_create(EXYNOS4210_UART1_BASE_ADDR, |
| EXYNOS4210_UART1_FIFO_SIZE, 1, serial_hd(1), |
| s->irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 1)]); |
| |
| uart[2] = exynos4210_uart_create(EXYNOS4210_UART2_BASE_ADDR, |
| EXYNOS4210_UART2_FIFO_SIZE, 2, serial_hd(2), |
| s->irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 2)]); |
| |
| uart[3] = exynos4210_uart_create(EXYNOS4210_UART3_BASE_ADDR, |
| EXYNOS4210_UART3_FIFO_SIZE, 3, serial_hd(3), |
| s->irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 3)]); |
| |
| /*** SD/MMC host controllers ***/ |
| for (n = 0; n < EXYNOS4210_SDHCI_NUMBER; n++) { |
| DeviceState *carddev; |
| BlockBackend *blk; |
| DriveInfo *di; |
| |
| /* Compatible with: |
| * - SD Host Controller Specification Version 2.0 |
| * - SDIO Specification Version 2.0 |
| * - MMC Specification Version 4.3 |
| * - SDMA |
| * - ADMA2 |
| * |
| * As this part of the Exynos4210 is not publicly available, |
| * we used the "HS-MMC Controller S3C2416X RISC Microprocessor" |
| * public datasheet which is very similar (implementing |
| * MMC Specification Version 4.0 being the only difference noted) |
| */ |
| dev = qdev_new(TYPE_S3C_SDHCI); |
| qdev_prop_set_uint64(dev, "capareg", EXYNOS4210_SDHCI_CAPABILITIES); |
| |
| busdev = SYS_BUS_DEVICE(dev); |
| sysbus_realize_and_unref(busdev, &error_fatal); |
| sysbus_mmio_map(busdev, 0, EXYNOS4210_SDHCI_ADDR(n)); |
| sysbus_connect_irq(busdev, 0, s->irq_table[exynos4210_get_irq(29, n)]); |
| |
| di = drive_get(IF_SD, 0, n); |
| blk = di ? blk_by_legacy_dinfo(di) : NULL; |
| carddev = qdev_new(TYPE_SD_CARD); |
| qdev_prop_set_drive(carddev, "drive", blk); |
| qdev_realize_and_unref(carddev, qdev_get_child_bus(dev, "sd-bus"), |
| &error_fatal); |
| } |
| |
| /*** Display controller (FIMD) ***/ |
| sysbus_create_varargs("exynos4210.fimd", EXYNOS4210_FIMD0_BASE_ADDR, |
| s->irq_table[exynos4210_get_irq(11, 0)], |
| s->irq_table[exynos4210_get_irq(11, 1)], |
| s->irq_table[exynos4210_get_irq(11, 2)], |
| NULL); |
| |
| sysbus_create_simple(TYPE_EXYNOS4210_EHCI, EXYNOS4210_EHCI_BASE_ADDR, |
| s->irq_table[exynos4210_get_irq(28, 3)]); |
| |
| /*** DMA controllers ***/ |
| pl330[0] = pl330_create(EXYNOS4210_PL330_BASE0_ADDR, |
| &s->pl330_irq_orgate[0], |
| s->irq_table[exynos4210_get_irq(21, 0)], |
| 32, 32, 32); |
| pl330[1] = pl330_create(EXYNOS4210_PL330_BASE1_ADDR, |
| &s->pl330_irq_orgate[1], |
| s->irq_table[exynos4210_get_irq(21, 1)], |
| 32, 32, 32); |
| pl330[2] = pl330_create(EXYNOS4210_PL330_BASE2_ADDR, |
| &s->pl330_irq_orgate[2], |
| s->irq_table[exynos4210_get_irq(20, 1)], |
| 1, 31, 64); |
| |
| sysbus_connect_irq(SYS_BUS_DEVICE(uart[0]), 1, |
| qdev_get_gpio_in(pl330[0], 15)); |
| sysbus_connect_irq(SYS_BUS_DEVICE(uart[1]), 1, |
| qdev_get_gpio_in(pl330[1], 15)); |
| sysbus_connect_irq(SYS_BUS_DEVICE(uart[2]), 1, |
| qdev_get_gpio_in(pl330[0], 17)); |
| sysbus_connect_irq(SYS_BUS_DEVICE(uart[3]), 1, |
| qdev_get_gpio_in(pl330[1], 17)); |
| } |
| |
| static void exynos4210_init(Object *obj) |
| { |
| Exynos4210State *s = EXYNOS4210_SOC(obj); |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(s->pl330_irq_orgate); i++) { |
| char *name = g_strdup_printf("pl330-irq-orgate%d", i); |
| OrIRQState *orgate = &s->pl330_irq_orgate[i]; |
| |
| object_initialize_child(obj, name, orgate, TYPE_OR_IRQ); |
| g_free(name); |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(s->cpu_irq_orgate); i++) { |
| g_autofree char *name = g_strdup_printf("cpu-irq-orgate%d", i); |
| object_initialize_child(obj, name, &s->cpu_irq_orgate[i], TYPE_OR_IRQ); |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(s->splitter); i++) { |
| g_autofree char *name = g_strdup_printf("irq-splitter%d", i); |
| object_initialize_child(obj, name, &s->splitter[i], TYPE_SPLIT_IRQ); |
| } |
| |
| object_initialize_child(obj, "a9mpcore", &s->a9mpcore, TYPE_A9MPCORE_PRIV); |
| object_initialize_child(obj, "ext-gic", &s->ext_gic, TYPE_EXYNOS4210_GIC); |
| object_initialize_child(obj, "int-combiner", &s->int_combiner, |
| TYPE_EXYNOS4210_COMBINER); |
| object_initialize_child(obj, "ext-combiner", &s->ext_combiner, |
| TYPE_EXYNOS4210_COMBINER); |
| } |
| |
| static void exynos4210_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| |
| dc->realize = exynos4210_realize; |
| } |
| |
| static const TypeInfo exynos4210_info = { |
| .name = TYPE_EXYNOS4210_SOC, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(Exynos4210State), |
| .instance_init = exynos4210_init, |
| .class_init = exynos4210_class_init, |
| }; |
| |
| static void exynos4210_register_types(void) |
| { |
| type_register_static(&exynos4210_info); |
| } |
| |
| type_init(exynos4210_register_types) |
