| ## |
| # @RockerSwitch: |
| # |
| # Rocker switch information. |
| # |
| # @name: switch name |
| # |
| # @id: switch ID |
| # |
| # @ports: number of front-panel ports |
| # |
| # Since: 2.4 |
| ## |
| { 'struct': 'RockerSwitch', |
| 'data': { 'name': 'str', 'id': 'uint64', 'ports': 'uint32' } } |
| |
| ## |
| # @query-rocker: |
| # |
| # Return rocker switch information. |
| # |
| # Returns: @Rocker information |
| # |
| # Since: 2.4 |
| ## |
| { 'command': 'query-rocker', |
| 'data': { 'name': 'str' }, |
| 'returns': 'RockerSwitch' } |
| |
| ## |
| # @RockerPortDuplex: |
| # |
| # An eumeration of port duplex states. |
| # |
| # @half: half duplex |
| # |
| # @full: full duplex |
| # |
| # Since: 2.4 |
| ## |
| { 'enum': 'RockerPortDuplex', 'data': [ 'half', 'full' ] } |
| |
| ## |
| # @RockerPortAutoneg: |
| # |
| # An eumeration of port autoneg states. |
| # |
| # @off: autoneg is off |
| # |
| # @on: autoneg is on |
| # |
| # Since: 2.4 |
| ## |
| { 'enum': 'RockerPortAutoneg', 'data': [ 'off', 'on' ] } |
| |
| ## |
| # @RockerPort: |
| # |
| # Rocker switch port information. |
| # |
| # @name: port name |
| # |
| # @enabled: port is enabled for I/O |
| # |
| # @link-up: physical link is UP on port |
| # |
| # @speed: port link speed in Mbps |
| # |
| # @duplex: port link duplex |
| # |
| # @autoneg: port link autoneg |
| # |
| # Since: 2.4 |
| ## |
| { 'struct': 'RockerPort', |
| 'data': { 'name': 'str', 'enabled': 'bool', 'link-up': 'bool', |
| 'speed': 'uint32', 'duplex': 'RockerPortDuplex', |
| 'autoneg': 'RockerPortAutoneg' } } |
| |
| ## |
| # @query-rocker-ports: |
| # |
| # Return rocker switch information. |
| # |
| # Returns: @Rocker information |
| # |
| # Since: 2.4 |
| ## |
| { 'command': 'query-rocker-ports', |
| 'data': { 'name': 'str' }, |
| 'returns': ['RockerPort'] } |
| |
| ## |
| # @RockerOfDpaFlowKey: |
| # |
| # Rocker switch OF-DPA flow key |
| # |
| # @priority: key priority, 0 being lowest priority |
| # |
| # @tbl-id: flow table ID |
| # |
| # @in-pport: #optional physical input port |
| # |
| # @tunnel-id: #optional tunnel ID |
| # |
| # @vlan-id: #optional VLAN ID |
| # |
| # @eth-type: #optional Ethernet header type |
| # |
| # @eth-src: #optional Ethernet header source MAC address |
| # |
| # @eth-dst: #optional Ethernet header destination MAC address |
| # |
| # @ip-proto: #optional IP Header protocol field |
| # |
| # @ip-tos: #optional IP header TOS field |
| # |
| # @ip-dst: #optional IP header destination address |
| # |
| # Note: fields are marked #optional to indicate that they may or may not |
| # appear in the flow key depending if they're relevant to the flow key. |
| # |
| # Since: 2.4 |
| ## |
| { 'struct': 'RockerOfDpaFlowKey', |
| 'data' : { 'priority': 'uint32', 'tbl-id': 'uint32', '*in-pport': 'uint32', |
| '*tunnel-id': 'uint32', '*vlan-id': 'uint16', |
| '*eth-type': 'uint16', '*eth-src': 'str', '*eth-dst': 'str', |
| '*ip-proto': 'uint8', '*ip-tos': 'uint8', '*ip-dst': 'str' } } |
| |
| ## |
| # @RockerOfDpaFlowMask: |
| # |
| # Rocker switch OF-DPA flow mask |
| # |
| # @in-pport: #optional physical input port |
| # |
| # @tunnel-id: #optional tunnel ID |
| # |
| # @vlan-id: #optional VLAN ID |
| # |
| # @eth-src: #optional Ethernet header source MAC address |
| # |
| # @eth-dst: #optional Ethernet header destination MAC address |
| # |
| # @ip-proto: #optional IP Header protocol field |
| # |
| # @ip-tos: #optional IP header TOS field |
| # |
| # Note: fields are marked #optional to indicate that they may or may not |
| # appear in the flow mask depending if they're relevant to the flow mask. |
| # |
| # Since: 2.4 |
| ## |
| { 'struct': 'RockerOfDpaFlowMask', |
| 'data' : { '*in-pport': 'uint32', '*tunnel-id': 'uint32', |
| '*vlan-id': 'uint16', '*eth-src': 'str', '*eth-dst': 'str', |
| '*ip-proto': 'uint8', '*ip-tos': 'uint8' } } |
| |
| ## |
| # @RockerOfDpaFlowAction: |
| # |
| # Rocker switch OF-DPA flow action |
| # |
| # @goto-tbl: #optional next table ID |
| # |
| # @group-id: #optional group ID |
| # |
| # @tunnel-lport: #optional tunnel logical port ID |
| # |
| # @vlan-id: #optional VLAN ID |
| # |
| # @new-vlan-id: #optional new VLAN ID |
| # |
| # @out-pport: #optional physical output port |
| # |
| # Note: fields are marked #optional to indicate that they may or may not |
| # appear in the flow action depending if they're relevant to the flow action. |
| # |
| # Since: 2.4 |
| ## |
| { 'struct': 'RockerOfDpaFlowAction', |
| 'data' : { '*goto-tbl': 'uint32', '*group-id': 'uint32', |
| '*tunnel-lport': 'uint32', '*vlan-id': 'uint16', |
| '*new-vlan-id': 'uint16', '*out-pport': 'uint32' } } |
| |
| ## |
| # @RockerOfDpaFlow: |
| # |
| # Rocker switch OF-DPA flow |
| # |
| # @cookie: flow unique cookie ID |
| # |
| # @hits: count of matches (hits) on flow |
| # |
| # @key: flow key |
| # |
| # @mask: flow mask |
| # |
| # @action: flow action |
| # |
| # Since: 2.4 |
| ## |
| { 'struct': 'RockerOfDpaFlow', |
| 'data': { 'cookie': 'uint64', 'hits': 'uint64', 'key': 'RockerOfDpaFlowKey', |
| 'mask': 'RockerOfDpaFlowMask', 'action': 'RockerOfDpaFlowAction' } } |
| |
| ## |
| # @query-rocker-of-dpa-flows: |
| # |
| # Return rocker OF-DPA flow information. |
| # |
| # @name: switch name |
| # |
| # @tbl-id: #optional flow table ID. If tbl-id is not specified, returns |
| # flow information for all tables. |
| # |
| # Returns: @Rocker OF-DPA flow information |
| # |
| # Since: 2.4 |
| ## |
| { 'command': 'query-rocker-of-dpa-flows', |
| 'data': { 'name': 'str', '*tbl-id': 'uint32' }, |
| 'returns': ['RockerOfDpaFlow'] } |
| |
| ## |
| # @RockerOfDpaGroup: |
| # |
| # Rocker switch OF-DPA group |
| # |
| # @id: group unique ID |
| # |
| # @type: group type |
| # |
| # @vlan-id: #optional VLAN ID |
| # |
| # @pport: #optional physical port number |
| # |
| # @index: #optional group index, unique with group type |
| # |
| # @out-pport: #optional output physical port number |
| # |
| # @group-id: #optional next group ID |
| # |
| # @set-vlan-id: #optional VLAN ID to set |
| # |
| # @pop-vlan: #optional pop VLAN headr from packet |
| # |
| # @group-ids: #optional list of next group IDs |
| # |
| # @set-eth-src: #optional set source MAC address in Ethernet header |
| # |
| # @set-eth-dst: #optional set destination MAC address in Ethernet header |
| # |
| # @ttl-check: #optional perform TTL check |
| # |
| # Note: fields are marked #optional to indicate that they may or may not |
| # appear in the group depending if they're relevant to the group type. |
| # |
| # Since: 2.4 |
| ## |
| { 'struct': 'RockerOfDpaGroup', |
| 'data': { 'id': 'uint32', 'type': 'uint8', '*vlan-id': 'uint16', |
| '*pport': 'uint32', '*index': 'uint32', '*out-pport': 'uint32', |
| '*group-id': 'uint32', '*set-vlan-id': 'uint16', |
| '*pop-vlan': 'uint8', '*group-ids': ['uint32'], |
| '*set-eth-src': 'str', '*set-eth-dst': 'str', |
| '*ttl-check': 'uint8' } } |
| |
| ## |
| # @query-rocker-of-dpa-groups: |
| # |
| # Return rocker OF-DPA group information. |
| # |
| # @name: switch name |
| # |
| # @type: #optional group type. If type is not specified, returns |
| # group information for all group types. |
| # |
| # Returns: @Rocker OF-DPA group information |
| # |
| # Since: 2.4 |
| ## |
| { 'command': 'query-rocker-of-dpa-groups', |
| 'data': { 'name': 'str', '*type': 'uint8' }, |
| 'returns': ['RockerOfDpaGroup'] } |
