| /* |
| * Flash NAND memory emulation. Based on "16M x 8 Bit NAND Flash |
| * Memory" datasheet for the KM29U128AT / K9F2808U0A chips from |
| * Samsung Electronic. |
| * |
| * Copyright (c) 2006 Openedhand Ltd. |
| * Written by Andrzej Zaborowski <balrog@zabor.org> |
| * |
| * This code is licensed under the GNU GPL v2. |
| */ |
| |
| #ifndef NAND_IO |
| |
| # include "hw.h" |
| # include "flash.h" |
| # include "block.h" |
| /* FIXME: Pass block device as an argument. */ |
| # include "sysemu.h" |
| |
| # define NAND_CMD_READ0 0x00 |
| # define NAND_CMD_READ1 0x01 |
| # define NAND_CMD_READ2 0x50 |
| # define NAND_CMD_LPREAD2 0x30 |
| # define NAND_CMD_NOSERIALREAD2 0x35 |
| # define NAND_CMD_RANDOMREAD1 0x05 |
| # define NAND_CMD_RANDOMREAD2 0xe0 |
| # define NAND_CMD_READID 0x90 |
| # define NAND_CMD_RESET 0xff |
| # define NAND_CMD_PAGEPROGRAM1 0x80 |
| # define NAND_CMD_PAGEPROGRAM2 0x10 |
| # define NAND_CMD_CACHEPROGRAM2 0x15 |
| # define NAND_CMD_BLOCKERASE1 0x60 |
| # define NAND_CMD_BLOCKERASE2 0xd0 |
| # define NAND_CMD_READSTATUS 0x70 |
| # define NAND_CMD_COPYBACKPRG1 0x85 |
| |
| # define NAND_IOSTATUS_ERROR (1 << 0) |
| # define NAND_IOSTATUS_PLANE0 (1 << 1) |
| # define NAND_IOSTATUS_PLANE1 (1 << 2) |
| # define NAND_IOSTATUS_PLANE2 (1 << 3) |
| # define NAND_IOSTATUS_PLANE3 (1 << 4) |
| # define NAND_IOSTATUS_BUSY (1 << 6) |
| # define NAND_IOSTATUS_UNPROTCT (1 << 7) |
| |
| # define MAX_PAGE 0x800 |
| # define MAX_OOB 0x40 |
| |
| struct NANDFlashState { |
| uint8_t manf_id, chip_id; |
| int size, pages; |
| int page_shift, oob_shift, erase_shift, addr_shift; |
| uint8_t *storage; |
| BlockDriverState *bdrv; |
| int mem_oob; |
| |
| int cle, ale, ce, wp, gnd; |
| |
| uint8_t io[MAX_PAGE + MAX_OOB + 0x400]; |
| uint8_t *ioaddr; |
| int iolen; |
| |
| uint32_t cmd, addr; |
| int addrlen; |
| int status; |
| int offset; |
| |
| void (*blk_write)(NANDFlashState *s); |
| void (*blk_erase)(NANDFlashState *s); |
| void (*blk_load)(NANDFlashState *s, uint32_t addr, int offset); |
| }; |
| |
| # define NAND_NO_AUTOINCR 0x00000001 |
| # define NAND_BUSWIDTH_16 0x00000002 |
| # define NAND_NO_PADDING 0x00000004 |
| # define NAND_CACHEPRG 0x00000008 |
| # define NAND_COPYBACK 0x00000010 |
| # define NAND_IS_AND 0x00000020 |
| # define NAND_4PAGE_ARRAY 0x00000040 |
| # define NAND_NO_READRDY 0x00000100 |
| # define NAND_SAMSUNG_LP (NAND_NO_PADDING | NAND_COPYBACK) |
| |
| # define NAND_IO |
| |
| # define PAGE(addr) ((addr) >> ADDR_SHIFT) |
| # define PAGE_START(page) (PAGE(page) * (PAGE_SIZE + OOB_SIZE)) |
| # define PAGE_MASK ((1 << ADDR_SHIFT) - 1) |
| # define OOB_SHIFT (PAGE_SHIFT - 5) |
| # define OOB_SIZE (1 << OOB_SHIFT) |
| # define SECTOR(addr) ((addr) >> (9 + ADDR_SHIFT - PAGE_SHIFT)) |
| # define SECTOR_OFFSET(addr) ((addr) & ((511 >> PAGE_SHIFT) << 8)) |
| |
| # define PAGE_SIZE 256 |
| # define PAGE_SHIFT 8 |
| # define PAGE_SECTORS 1 |
| # define ADDR_SHIFT 8 |
| # include "nand.c" |
| # define PAGE_SIZE 512 |
| # define PAGE_SHIFT 9 |
| # define PAGE_SECTORS 1 |
| # define ADDR_SHIFT 8 |
| # include "nand.c" |
| # define PAGE_SIZE 2048 |
| # define PAGE_SHIFT 11 |
| # define PAGE_SECTORS 4 |
| # define ADDR_SHIFT 16 |
| # include "nand.c" |
| |
| /* Information based on Linux drivers/mtd/nand/nand_ids.c */ |
| static const struct { |
| int size; |
| int width; |
| int page_shift; |
| int erase_shift; |
| uint32_t options; |
| } nand_flash_ids[0x100] = { |
| [0 ... 0xff] = { 0 }, |
| |
| [0x6e] = { 1, 8, 8, 4, 0 }, |
| [0x64] = { 2, 8, 8, 4, 0 }, |
| [0x6b] = { 4, 8, 9, 4, 0 }, |
| [0xe8] = { 1, 8, 8, 4, 0 }, |
| [0xec] = { 1, 8, 8, 4, 0 }, |
| [0xea] = { 2, 8, 8, 4, 0 }, |
| [0xd5] = { 4, 8, 9, 4, 0 }, |
| [0xe3] = { 4, 8, 9, 4, 0 }, |
| [0xe5] = { 4, 8, 9, 4, 0 }, |
| [0xd6] = { 8, 8, 9, 4, 0 }, |
| |
| [0x39] = { 8, 8, 9, 4, 0 }, |
| [0xe6] = { 8, 8, 9, 4, 0 }, |
| [0x49] = { 8, 16, 9, 4, NAND_BUSWIDTH_16 }, |
| [0x59] = { 8, 16, 9, 4, NAND_BUSWIDTH_16 }, |
| |
| [0x33] = { 16, 8, 9, 5, 0 }, |
| [0x73] = { 16, 8, 9, 5, 0 }, |
| [0x43] = { 16, 16, 9, 5, NAND_BUSWIDTH_16 }, |
| [0x53] = { 16, 16, 9, 5, NAND_BUSWIDTH_16 }, |
| |
| [0x35] = { 32, 8, 9, 5, 0 }, |
| [0x75] = { 32, 8, 9, 5, 0 }, |
| [0x45] = { 32, 16, 9, 5, NAND_BUSWIDTH_16 }, |
| [0x55] = { 32, 16, 9, 5, NAND_BUSWIDTH_16 }, |
| |
| [0x36] = { 64, 8, 9, 5, 0 }, |
| [0x76] = { 64, 8, 9, 5, 0 }, |
| [0x46] = { 64, 16, 9, 5, NAND_BUSWIDTH_16 }, |
| [0x56] = { 64, 16, 9, 5, NAND_BUSWIDTH_16 }, |
| |
| [0x78] = { 128, 8, 9, 5, 0 }, |
| [0x39] = { 128, 8, 9, 5, 0 }, |
| [0x79] = { 128, 8, 9, 5, 0 }, |
| [0x72] = { 128, 16, 9, 5, NAND_BUSWIDTH_16 }, |
| [0x49] = { 128, 16, 9, 5, NAND_BUSWIDTH_16 }, |
| [0x74] = { 128, 16, 9, 5, NAND_BUSWIDTH_16 }, |
| [0x59] = { 128, 16, 9, 5, NAND_BUSWIDTH_16 }, |
| |
| [0x71] = { 256, 8, 9, 5, 0 }, |
| |
| /* |
| * These are the new chips with large page size. The pagesize and the |
| * erasesize is determined from the extended id bytes |
| */ |
| # define LP_OPTIONS (NAND_SAMSUNG_LP | NAND_NO_READRDY | NAND_NO_AUTOINCR) |
| # define LP_OPTIONS16 (LP_OPTIONS | NAND_BUSWIDTH_16) |
| |
| /* 512 Megabit */ |
| [0xa2] = { 64, 8, 0, 0, LP_OPTIONS }, |
| [0xf2] = { 64, 8, 0, 0, LP_OPTIONS }, |
| [0xb2] = { 64, 16, 0, 0, LP_OPTIONS16 }, |
| [0xc2] = { 64, 16, 0, 0, LP_OPTIONS16 }, |
| |
| /* 1 Gigabit */ |
| [0xa1] = { 128, 8, 0, 0, LP_OPTIONS }, |
| [0xf1] = { 128, 8, 0, 0, LP_OPTIONS }, |
| [0xb1] = { 128, 16, 0, 0, LP_OPTIONS16 }, |
| [0xc1] = { 128, 16, 0, 0, LP_OPTIONS16 }, |
| |
| /* 2 Gigabit */ |
| [0xaa] = { 256, 8, 0, 0, LP_OPTIONS }, |
| [0xda] = { 256, 8, 0, 0, LP_OPTIONS }, |
| [0xba] = { 256, 16, 0, 0, LP_OPTIONS16 }, |
| [0xca] = { 256, 16, 0, 0, LP_OPTIONS16 }, |
| |
| /* 4 Gigabit */ |
| [0xac] = { 512, 8, 0, 0, LP_OPTIONS }, |
| [0xdc] = { 512, 8, 0, 0, LP_OPTIONS }, |
| [0xbc] = { 512, 16, 0, 0, LP_OPTIONS16 }, |
| [0xcc] = { 512, 16, 0, 0, LP_OPTIONS16 }, |
| |
| /* 8 Gigabit */ |
| [0xa3] = { 1024, 8, 0, 0, LP_OPTIONS }, |
| [0xd3] = { 1024, 8, 0, 0, LP_OPTIONS }, |
| [0xb3] = { 1024, 16, 0, 0, LP_OPTIONS16 }, |
| [0xc3] = { 1024, 16, 0, 0, LP_OPTIONS16 }, |
| |
| /* 16 Gigabit */ |
| [0xa5] = { 2048, 8, 0, 0, LP_OPTIONS }, |
| [0xd5] = { 2048, 8, 0, 0, LP_OPTIONS }, |
| [0xb5] = { 2048, 16, 0, 0, LP_OPTIONS16 }, |
| [0xc5] = { 2048, 16, 0, 0, LP_OPTIONS16 }, |
| }; |
| |
| static void nand_reset(NANDFlashState *s) |
| { |
| s->cmd = NAND_CMD_READ0; |
| s->addr = 0; |
| s->addrlen = 0; |
| s->iolen = 0; |
| s->offset = 0; |
| s->status &= NAND_IOSTATUS_UNPROTCT; |
| } |
| |
| static void nand_command(NANDFlashState *s) |
| { |
| unsigned int offset; |
| switch (s->cmd) { |
| case NAND_CMD_READ0: |
| s->iolen = 0; |
| break; |
| |
| case NAND_CMD_READID: |
| s->io[0] = s->manf_id; |
| s->io[1] = s->chip_id; |
| s->io[2] = 'Q'; /* Don't-care byte (often 0xa5) */ |
| if (nand_flash_ids[s->chip_id].options & NAND_SAMSUNG_LP) |
| s->io[3] = 0x15; /* Page Size, Block Size, Spare Size.. */ |
| else |
| s->io[3] = 0xc0; /* Multi-plane */ |
| s->ioaddr = s->io; |
| s->iolen = 4; |
| break; |
| |
| case NAND_CMD_RANDOMREAD2: |
| case NAND_CMD_NOSERIALREAD2: |
| if (!(nand_flash_ids[s->chip_id].options & NAND_SAMSUNG_LP)) |
| break; |
| offset = s->addr & ((1 << s->addr_shift) - 1); |
| s->blk_load(s, s->addr, offset); |
| if (s->gnd) |
| s->iolen = (1 << s->page_shift) - offset; |
| else |
| s->iolen = (1 << s->page_shift) + (1 << s->oob_shift) - offset; |
| break; |
| |
| case NAND_CMD_RESET: |
| nand_reset(s); |
| break; |
| |
| case NAND_CMD_PAGEPROGRAM1: |
| s->ioaddr = s->io; |
| s->iolen = 0; |
| break; |
| |
| case NAND_CMD_PAGEPROGRAM2: |
| if (s->wp) { |
| s->blk_write(s); |
| } |
| break; |
| |
| case NAND_CMD_BLOCKERASE1: |
| break; |
| |
| case NAND_CMD_BLOCKERASE2: |
| if (nand_flash_ids[s->chip_id].options & NAND_SAMSUNG_LP) |
| s->addr <<= 16; |
| else |
| s->addr <<= 8; |
| |
| if (s->wp) { |
| s->blk_erase(s); |
| } |
| break; |
| |
| case NAND_CMD_READSTATUS: |
| s->io[0] = s->status; |
| s->ioaddr = s->io; |
| s->iolen = 1; |
| break; |
| |
| default: |
| printf("%s: Unknown NAND command 0x%02x\n", __FUNCTION__, s->cmd); |
| } |
| } |
| |
| static void nand_save(QEMUFile *f, void *opaque) |
| { |
| NANDFlashState *s = (NANDFlashState *) opaque; |
| qemu_put_byte(f, s->cle); |
| qemu_put_byte(f, s->ale); |
| qemu_put_byte(f, s->ce); |
| qemu_put_byte(f, s->wp); |
| qemu_put_byte(f, s->gnd); |
| qemu_put_buffer(f, s->io, sizeof(s->io)); |
| qemu_put_be32(f, s->ioaddr - s->io); |
| qemu_put_be32(f, s->iolen); |
| |
| qemu_put_be32s(f, &s->cmd); |
| qemu_put_be32s(f, &s->addr); |
| qemu_put_be32(f, s->addrlen); |
| qemu_put_be32(f, s->status); |
| qemu_put_be32(f, s->offset); |
| /* XXX: do we want to save s->storage too? */ |
| } |
| |
| static int nand_load(QEMUFile *f, void *opaque, int version_id) |
| { |
| NANDFlashState *s = (NANDFlashState *) opaque; |
| s->cle = qemu_get_byte(f); |
| s->ale = qemu_get_byte(f); |
| s->ce = qemu_get_byte(f); |
| s->wp = qemu_get_byte(f); |
| s->gnd = qemu_get_byte(f); |
| qemu_get_buffer(f, s->io, sizeof(s->io)); |
| s->ioaddr = s->io + qemu_get_be32(f); |
| s->iolen = qemu_get_be32(f); |
| if (s->ioaddr >= s->io + sizeof(s->io) || s->ioaddr < s->io) |
| return -EINVAL; |
| |
| qemu_get_be32s(f, &s->cmd); |
| qemu_get_be32s(f, &s->addr); |
| s->addrlen = qemu_get_be32(f); |
| s->status = qemu_get_be32(f); |
| s->offset = qemu_get_be32(f); |
| return 0; |
| } |
| |
| /* |
| * Chip inputs are CLE, ALE, CE, WP, GND and eight I/O pins. Chip |
| * outputs are R/B and eight I/O pins. |
| * |
| * CE, WP and R/B are active low. |
| */ |
| void nand_setpins(NANDFlashState *s, |
| int cle, int ale, int ce, int wp, int gnd) |
| { |
| s->cle = cle; |
| s->ale = ale; |
| s->ce = ce; |
| s->wp = wp; |
| s->gnd = gnd; |
| if (wp) |
| s->status |= NAND_IOSTATUS_UNPROTCT; |
| else |
| s->status &= ~NAND_IOSTATUS_UNPROTCT; |
| } |
| |
| void nand_getpins(NANDFlashState *s, int *rb) |
| { |
| *rb = 1; |
| } |
| |
| void nand_setio(NANDFlashState *s, uint8_t value) |
| { |
| if (!s->ce && s->cle) { |
| if (nand_flash_ids[s->chip_id].options & NAND_SAMSUNG_LP) { |
| if (s->cmd == NAND_CMD_READ0 && value == NAND_CMD_LPREAD2) |
| return; |
| if (value == NAND_CMD_RANDOMREAD1) { |
| s->addr &= ~((1 << s->addr_shift) - 1); |
| s->addrlen = 0; |
| return; |
| } |
| } |
| if (value == NAND_CMD_READ0) |
| s->offset = 0; |
| else if (value == NAND_CMD_READ1) { |
| s->offset = 0x100; |
| value = NAND_CMD_READ0; |
| } |
| else if (value == NAND_CMD_READ2) { |
| s->offset = 1 << s->page_shift; |
| value = NAND_CMD_READ0; |
| } |
| |
| s->cmd = value; |
| |
| if (s->cmd == NAND_CMD_READSTATUS || |
| s->cmd == NAND_CMD_PAGEPROGRAM2 || |
| s->cmd == NAND_CMD_BLOCKERASE1 || |
| s->cmd == NAND_CMD_BLOCKERASE2 || |
| s->cmd == NAND_CMD_NOSERIALREAD2 || |
| s->cmd == NAND_CMD_RANDOMREAD2 || |
| s->cmd == NAND_CMD_RESET) |
| nand_command(s); |
| |
| if (s->cmd != NAND_CMD_RANDOMREAD2) { |
| s->addrlen = 0; |
| } |
| } |
| |
| if (s->ale) { |
| unsigned int shift = s->addrlen * 8; |
| unsigned int mask = ~(0xff << shift); |
| unsigned int v = value << shift; |
| |
| s->addr = (s->addr & mask) | v; |
| s->addrlen ++; |
| |
| if (s->addrlen == 1 && s->cmd == NAND_CMD_READID) |
| nand_command(s); |
| |
| if (!(nand_flash_ids[s->chip_id].options & NAND_SAMSUNG_LP) && |
| s->addrlen == 3 && ( |
| s->cmd == NAND_CMD_READ0 || |
| s->cmd == NAND_CMD_PAGEPROGRAM1)) |
| nand_command(s); |
| if ((nand_flash_ids[s->chip_id].options & NAND_SAMSUNG_LP) && |
| s->addrlen == 4 && ( |
| s->cmd == NAND_CMD_READ0 || |
| s->cmd == NAND_CMD_PAGEPROGRAM1)) |
| nand_command(s); |
| } |
| |
| if (!s->cle && !s->ale && s->cmd == NAND_CMD_PAGEPROGRAM1) { |
| if (s->iolen < (1 << s->page_shift) + (1 << s->oob_shift)) |
| s->io[s->iolen ++] = value; |
| } else if (!s->cle && !s->ale && s->cmd == NAND_CMD_COPYBACKPRG1) { |
| if ((s->addr & ((1 << s->addr_shift) - 1)) < |
| (1 << s->page_shift) + (1 << s->oob_shift)) { |
| s->io[s->iolen + (s->addr & ((1 << s->addr_shift) - 1))] = value; |
| s->addr ++; |
| } |
| } |
| } |
| |
| uint8_t nand_getio(NANDFlashState *s) |
| { |
| int offset; |
| |
| /* Allow sequential reading */ |
| if (!s->iolen && s->cmd == NAND_CMD_READ0) { |
| offset = (s->addr & ((1 << s->addr_shift) - 1)) + s->offset; |
| s->offset = 0; |
| |
| s->blk_load(s, s->addr, offset); |
| if (s->gnd) |
| s->iolen = (1 << s->page_shift) - offset; |
| else |
| s->iolen = (1 << s->page_shift) + (1 << s->oob_shift) - offset; |
| } |
| |
| if (s->ce || s->iolen <= 0) |
| return 0; |
| |
| s->iolen --; |
| s->addr++; |
| return *(s->ioaddr ++); |
| } |
| |
| NANDFlashState *nand_init(int manf_id, int chip_id) |
| { |
| int pagesize; |
| NANDFlashState *s; |
| DriveInfo *dinfo; |
| |
| if (nand_flash_ids[chip_id].size == 0) { |
| hw_error("%s: Unsupported NAND chip ID.\n", __FUNCTION__); |
| } |
| |
| s = (NANDFlashState *) qemu_mallocz(sizeof(NANDFlashState)); |
| dinfo = drive_get(IF_MTD, 0, 0); |
| if (dinfo) |
| s->bdrv = dinfo->bdrv; |
| s->manf_id = manf_id; |
| s->chip_id = chip_id; |
| s->size = nand_flash_ids[s->chip_id].size << 20; |
| if (nand_flash_ids[s->chip_id].options & NAND_SAMSUNG_LP) { |
| s->page_shift = 11; |
| s->erase_shift = 6; |
| } else { |
| s->page_shift = nand_flash_ids[s->chip_id].page_shift; |
| s->erase_shift = nand_flash_ids[s->chip_id].erase_shift; |
| } |
| |
| switch (1 << s->page_shift) { |
| case 256: |
| nand_init_256(s); |
| break; |
| case 512: |
| nand_init_512(s); |
| break; |
| case 2048: |
| nand_init_2048(s); |
| break; |
| default: |
| hw_error("%s: Unsupported NAND block size.\n", __FUNCTION__); |
| } |
| |
| pagesize = 1 << s->oob_shift; |
| s->mem_oob = 1; |
| if (s->bdrv && bdrv_getlength(s->bdrv) >= |
| (s->pages << s->page_shift) + (s->pages << s->oob_shift)) { |
| pagesize = 0; |
| s->mem_oob = 0; |
| } |
| |
| if (!s->bdrv) |
| pagesize += 1 << s->page_shift; |
| if (pagesize) |
| s->storage = (uint8_t *) memset(qemu_malloc(s->pages * pagesize), |
| 0xff, s->pages * pagesize); |
| /* Give s->ioaddr a sane value in case we save state before it |
| is used. */ |
| s->ioaddr = s->io; |
| |
| register_savevm("nand", -1, 0, nand_save, nand_load, s); |
| |
| return s; |
| } |
| |
| void nand_done(NANDFlashState *s) |
| { |
| if (s->bdrv) { |
| bdrv_close(s->bdrv); |
| bdrv_delete(s->bdrv); |
| } |
| |
| if (!s->bdrv || s->mem_oob) |
| qemu_free(s->storage); |
| |
| qemu_free(s); |
| } |
| |
| #else |
| |
| /* Program a single page */ |
| static void glue(nand_blk_write_, PAGE_SIZE)(NANDFlashState *s) |
| { |
| uint32_t off, page, sector, soff; |
| uint8_t iobuf[(PAGE_SECTORS + 2) * 0x200]; |
| if (PAGE(s->addr) >= s->pages) |
| return; |
| |
| if (!s->bdrv) { |
| memcpy(s->storage + PAGE_START(s->addr) + (s->addr & PAGE_MASK) + |
| s->offset, s->io, s->iolen); |
| } else if (s->mem_oob) { |
| sector = SECTOR(s->addr); |
| off = (s->addr & PAGE_MASK) + s->offset; |
| soff = SECTOR_OFFSET(s->addr); |
| if (bdrv_read(s->bdrv, sector, iobuf, PAGE_SECTORS) == -1) { |
| printf("%s: read error in sector %i\n", __FUNCTION__, sector); |
| return; |
| } |
| |
| memcpy(iobuf + (soff | off), s->io, MIN(s->iolen, PAGE_SIZE - off)); |
| if (off + s->iolen > PAGE_SIZE) { |
| page = PAGE(s->addr); |
| memcpy(s->storage + (page << OOB_SHIFT), s->io + PAGE_SIZE - off, |
| MIN(OOB_SIZE, off + s->iolen - PAGE_SIZE)); |
| } |
| |
| if (bdrv_write(s->bdrv, sector, iobuf, PAGE_SECTORS) == -1) |
| printf("%s: write error in sector %i\n", __FUNCTION__, sector); |
| } else { |
| off = PAGE_START(s->addr) + (s->addr & PAGE_MASK) + s->offset; |
| sector = off >> 9; |
| soff = off & 0x1ff; |
| if (bdrv_read(s->bdrv, sector, iobuf, PAGE_SECTORS + 2) == -1) { |
| printf("%s: read error in sector %i\n", __FUNCTION__, sector); |
| return; |
| } |
| |
| memcpy(iobuf + soff, s->io, s->iolen); |
| |
| if (bdrv_write(s->bdrv, sector, iobuf, PAGE_SECTORS + 2) == -1) |
| printf("%s: write error in sector %i\n", __FUNCTION__, sector); |
| } |
| s->offset = 0; |
| } |
| |
| /* Erase a single block */ |
| static void glue(nand_blk_erase_, PAGE_SIZE)(NANDFlashState *s) |
| { |
| uint32_t i, page, addr; |
| uint8_t iobuf[0x200] = { [0 ... 0x1ff] = 0xff, }; |
| addr = s->addr & ~((1 << (ADDR_SHIFT + s->erase_shift)) - 1); |
| |
| if (PAGE(addr) >= s->pages) |
| return; |
| |
| if (!s->bdrv) { |
| memset(s->storage + PAGE_START(addr), |
| 0xff, (PAGE_SIZE + OOB_SIZE) << s->erase_shift); |
| } else if (s->mem_oob) { |
| memset(s->storage + (PAGE(addr) << OOB_SHIFT), |
| 0xff, OOB_SIZE << s->erase_shift); |
| i = SECTOR(addr); |
| page = SECTOR(addr + (ADDR_SHIFT + s->erase_shift)); |
| for (; i < page; i ++) |
| if (bdrv_write(s->bdrv, i, iobuf, 1) == -1) |
| printf("%s: write error in sector %i\n", __FUNCTION__, i); |
| } else { |
| addr = PAGE_START(addr); |
| page = addr >> 9; |
| if (bdrv_read(s->bdrv, page, iobuf, 1) == -1) |
| printf("%s: read error in sector %i\n", __FUNCTION__, page); |
| memset(iobuf + (addr & 0x1ff), 0xff, (~addr & 0x1ff) + 1); |
| if (bdrv_write(s->bdrv, page, iobuf, 1) == -1) |
| printf("%s: write error in sector %i\n", __FUNCTION__, page); |
| |
| memset(iobuf, 0xff, 0x200); |
| i = (addr & ~0x1ff) + 0x200; |
| for (addr += ((PAGE_SIZE + OOB_SIZE) << s->erase_shift) - 0x200; |
| i < addr; i += 0x200) |
| if (bdrv_write(s->bdrv, i >> 9, iobuf, 1) == -1) |
| printf("%s: write error in sector %i\n", __FUNCTION__, i >> 9); |
| |
| page = i >> 9; |
| if (bdrv_read(s->bdrv, page, iobuf, 1) == -1) |
| printf("%s: read error in sector %i\n", __FUNCTION__, page); |
| memset(iobuf, 0xff, ((addr - 1) & 0x1ff) + 1); |
| if (bdrv_write(s->bdrv, page, iobuf, 1) == -1) |
| printf("%s: write error in sector %i\n", __FUNCTION__, page); |
| } |
| } |
| |
| static void glue(nand_blk_load_, PAGE_SIZE)(NANDFlashState *s, |
| uint32_t addr, int offset) |
| { |
| if (PAGE(addr) >= s->pages) |
| return; |
| |
| if (s->bdrv) { |
| if (s->mem_oob) { |
| if (bdrv_read(s->bdrv, SECTOR(addr), s->io, PAGE_SECTORS) == -1) |
| printf("%s: read error in sector %i\n", |
| __FUNCTION__, SECTOR(addr)); |
| memcpy(s->io + SECTOR_OFFSET(s->addr) + PAGE_SIZE, |
| s->storage + (PAGE(s->addr) << OOB_SHIFT), |
| OOB_SIZE); |
| s->ioaddr = s->io + SECTOR_OFFSET(s->addr) + offset; |
| } else { |
| if (bdrv_read(s->bdrv, PAGE_START(addr) >> 9, |
| s->io, (PAGE_SECTORS + 2)) == -1) |
| printf("%s: read error in sector %i\n", |
| __FUNCTION__, PAGE_START(addr) >> 9); |
| s->ioaddr = s->io + (PAGE_START(addr) & 0x1ff) + offset; |
| } |
| } else { |
| memcpy(s->io, s->storage + PAGE_START(s->addr) + |
| offset, PAGE_SIZE + OOB_SIZE - offset); |
| s->ioaddr = s->io; |
| } |
| } |
| |
| static void glue(nand_init_, PAGE_SIZE)(NANDFlashState *s) |
| { |
| s->oob_shift = PAGE_SHIFT - 5; |
| s->pages = s->size >> PAGE_SHIFT; |
| s->addr_shift = ADDR_SHIFT; |
| |
| s->blk_erase = glue(nand_blk_erase_, PAGE_SIZE); |
| s->blk_write = glue(nand_blk_write_, PAGE_SIZE); |
| s->blk_load = glue(nand_blk_load_, PAGE_SIZE); |
| } |
| |
| # undef PAGE_SIZE |
| # undef PAGE_SHIFT |
| # undef PAGE_SECTORS |
| # undef ADDR_SHIFT |
| #endif /* NAND_IO */ |