hw/ide/ahci.h - qemu - Git at Google

 /*
  * QEMU AHCI Emulation
  *
  * Copyright (c) 2010 qiaochong@loongson.cn
  * Copyright (c) 2010 Roland Elek <elek.roland@gmail.com>
  * Copyright (c) 2010 Sebastian Herbszt <herbszt@gmx.de>
  * Copyright (c) 2010 Alexander Graf <agraf@suse.de>
  *
  * This library is free software; you can redistribute it and/or
  * modify it under the terms of the GNU Lesser General Public
  * License as published by the Free Software Foundation; either
  * version 2 of the License, or (at your option) any later version.
  *
  * This library is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  * Lesser General Public License for more details.
  *
  * You should have received a copy of the GNU Lesser General Public
  * License along with this library; if not, see <http://www.gnu.org/licenses/>.
  *
  */

 #ifndef HW_IDE_AHCI_H
 #define HW_IDE_AHCI_H

 #define AHCI_MEM_BAR_SIZE         0x1000
 #define AHCI_MAX_PORTS            32
 #define AHCI_MAX_SG               168 /* hardware max is 64K */
 #define AHCI_DMA_BOUNDARY         0xffffffff
 #define AHCI_USE_CLUSTERING       0
 #define AHCI_MAX_CMDS             32
 #define AHCI_CMD_SZ               32
 #define AHCI_CMD_SLOT_SZ          (AHCI_MAX_CMDS * AHCI_CMD_SZ)
 #define AHCI_RX_FIS_SZ            256
 #define AHCI_CMD_TBL_CDB          0x40
 #define AHCI_CMD_TBL_HDR_SZ       0x80
 #define AHCI_CMD_TBL_SZ           (AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16))
 #define AHCI_CMD_TBL_AR_SZ        (AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS)
 #define AHCI_PORT_PRIV_DMA_SZ     (AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ + \
                                    AHCI_RX_FIS_SZ)

 #define AHCI_IRQ_ON_SG            (1U << 31)
 #define AHCI_CMD_ATAPI            (1 << 5)
 #define AHCI_CMD_WRITE            (1 << 6)
 #define AHCI_CMD_PREFETCH         (1 << 7)
 #define AHCI_CMD_RESET            (1 << 8)
 #define AHCI_CMD_CLR_BUSY         (1 << 10)

 #define RX_FIS_D2H_REG            0x40 /* offset of D2H Register FIS data */
 #define RX_FIS_SDB                0x58 /* offset of SDB FIS data */
 #define RX_FIS_UNK                0x60 /* offset of Unknown FIS data */

 /* global controller registers */
 #define HOST_CAP                  0x00 /* host capabilities */
 #define HOST_CTL                  0x04 /* global host control */
 #define HOST_IRQ_STAT             0x08 /* interrupt status */
 #define HOST_PORTS_IMPL           0x0c /* bitmap of implemented ports */
 #define HOST_VERSION              0x10 /* AHCI spec. version compliancy */

 /* HOST_CTL bits */
 #define HOST_CTL_RESET            (1 << 0)  /* reset controller; self-clear */
 #define HOST_CTL_IRQ_EN           (1 << 1)  /* global IRQ enable */
 #define HOST_CTL_AHCI_EN          (1U << 31) /* AHCI enabled */

 /* HOST_CAP bits */
 #define HOST_CAP_SSC              (1 << 14) /* Slumber capable */
 #define HOST_CAP_AHCI             (1 << 18) /* AHCI only */
 #define HOST_CAP_CLO              (1 << 24) /* Command List Override support */
 #define HOST_CAP_SSS              (1 << 27) /* Staggered Spin-up */
 #define HOST_CAP_NCQ              (1 << 30) /* Native Command Queueing */
 #define HOST_CAP_64               (1U << 31) /* PCI DAC (64-bit DMA) support */

 /* registers for each SATA port */
 #define PORT_LST_ADDR             0x00 /* command list DMA addr */
 #define PORT_LST_ADDR_HI          0x04 /* command list DMA addr hi */
 #define PORT_FIS_ADDR             0x08 /* FIS rx buf addr */
 #define PORT_FIS_ADDR_HI          0x0c /* FIS rx buf addr hi */
 #define PORT_IRQ_STAT             0x10 /* interrupt status */
 #define PORT_IRQ_MASK             0x14 /* interrupt enable/disable mask */
 #define PORT_CMD                  0x18 /* port command */
 #define PORT_TFDATA               0x20 /* taskfile data */
 #define PORT_SIG                  0x24 /* device TF signature */
 #define PORT_SCR_STAT             0x28 /* SATA phy register: SStatus */
 #define PORT_SCR_CTL              0x2c /* SATA phy register: SControl */
 #define PORT_SCR_ERR              0x30 /* SATA phy register: SError */
 #define PORT_SCR_ACT              0x34 /* SATA phy register: SActive */
 #define PORT_CMD_ISSUE            0x38 /* command issue */
 #define PORT_RESERVED             0x3c /* reserved */

 /* PORT_IRQ_{STAT,MASK} bits */
 #define PORT_IRQ_COLD_PRES        (1U << 31) /* cold presence detect */
 #define PORT_IRQ_TF_ERR           (1 << 30) /* task file error */
 #define PORT_IRQ_HBUS_ERR         (1 << 29) /* host bus fatal error */
 #define PORT_IRQ_HBUS_DATA_ERR    (1 << 28) /* host bus data error */
 #define PORT_IRQ_IF_ERR           (1 << 27) /* interface fatal error */
 #define PORT_IRQ_IF_NONFATAL      (1 << 26) /* interface non-fatal error */
 #define PORT_IRQ_OVERFLOW         (1 << 24) /* xfer exhausted available S/G */
 #define PORT_IRQ_BAD_PMP          (1 << 23) /* incorrect port multiplier */

 #define PORT_IRQ_PHYRDY           (1 << 22) /* PhyRdy changed */
 #define PORT_IRQ_DEV_ILCK         (1 << 7) /* device interlock */
 #define PORT_IRQ_CONNECT          (1 << 6) /* port connect change status */
 #define PORT_IRQ_SG_DONE          (1 << 5) /* descriptor processed */
 #define PORT_IRQ_UNK_FIS          (1 << 4) /* unknown FIS rx'd */
 #define PORT_IRQ_SDB_FIS          (1 << 3) /* Set Device Bits FIS rx'd */
 #define PORT_IRQ_DMAS_FIS         (1 << 2) /* DMA Setup FIS rx'd */
 #define PORT_IRQ_PIOS_FIS         (1 << 1) /* PIO Setup FIS rx'd */
 #define PORT_IRQ_D2H_REG_FIS      (1 << 0) /* D2H Register FIS rx'd */

 #define PORT_IRQ_FREEZE           (PORT_IRQ_HBUS_ERR | PORT_IRQ_IF_ERR |   \
                                    PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY |    \
                                    PORT_IRQ_UNK_FIS)
 #define PORT_IRQ_ERROR            (PORT_IRQ_FREEZE | PORT_IRQ_TF_ERR |     \
                                    PORT_IRQ_HBUS_DATA_ERR)
 #define DEF_PORT_IRQ              (PORT_IRQ_ERROR | PORT_IRQ_SG_DONE |     \
                                    PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS |  \
                                    PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS)

 /* PORT_CMD bits */
 #define PORT_CMD_ATAPI            (1 << 24) /* Device is ATAPI */
 #define PORT_CMD_LIST_ON          (1 << 15) /* cmd list DMA engine running */
 #define PORT_CMD_FIS_ON           (1 << 14) /* FIS DMA engine running */
 #define PORT_CMD_FIS_RX           (1 << 4) /* Enable FIS receive DMA engine */
 #define PORT_CMD_CLO              (1 << 3) /* Command list override */
 #define PORT_CMD_POWER_ON         (1 << 2) /* Power up device */
 #define PORT_CMD_SPIN_UP          (1 << 1) /* Spin up device */
 #define PORT_CMD_START            (1 << 0) /* Enable port DMA engine */

 #define PORT_CMD_ICC_MASK         (0xf << 28) /* i/f ICC state mask */
 #define PORT_CMD_ICC_ACTIVE       (0x1 << 28) /* Put i/f in active state */
 #define PORT_CMD_ICC_PARTIAL      (0x2 << 28) /* Put i/f in partial state */
 #define PORT_CMD_ICC_SLUMBER      (0x6 << 28) /* Put i/f in slumber state */

 #define PORT_IRQ_STAT_DHRS        (1 << 0) /* Device to Host Register FIS */
 #define PORT_IRQ_STAT_PSS         (1 << 1) /* PIO Setup FIS */
 #define PORT_IRQ_STAT_DSS         (1 << 2) /* DMA Setup FIS */
 #define PORT_IRQ_STAT_SDBS        (1 << 3) /* Set Device Bits */
 #define PORT_IRQ_STAT_UFS         (1 << 4) /* Unknown FIS */
 #define PORT_IRQ_STAT_DPS         (1 << 5) /* Descriptor Processed */
 #define PORT_IRQ_STAT_PCS         (1 << 6) /* Port Connect Change Status */
 #define PORT_IRQ_STAT_DMPS        (1 << 7) /* Device Mechanical Presence
                                               Status */
 #define PORT_IRQ_STAT_PRCS        (1 << 22) /* File Ready Status */
 #define PORT_IRQ_STAT_IPMS        (1 << 23) /* Incorrect Port Multiplier
                                                Status */
 #define PORT_IRQ_STAT_OFS         (1 << 24) /* Overflow Status */
 #define PORT_IRQ_STAT_INFS        (1 << 26) /* Interface Non-Fatal Error
                                                Status */
 #define PORT_IRQ_STAT_IFS         (1 << 27) /* Interface Fatal Error */
 #define PORT_IRQ_STAT_HBDS        (1 << 28) /* Host Bus Data Error Status */
 #define PORT_IRQ_STAT_HBFS        (1 << 29) /* Host Bus Fatal Error Status */
 #define PORT_IRQ_STAT_TFES        (1 << 30) /* Task File Error Status */
 #define PORT_IRQ_STAT_CPDS        (1U << 31) /* Code Port Detect Status */

 /* ap->flags bits */
 #define AHCI_FLAG_NO_NCQ                  (1 << 24)
 #define AHCI_FLAG_IGN_IRQ_IF_ERR          (1 << 25) /* ignore IRQ_IF_ERR */
 #define AHCI_FLAG_HONOR_PI                (1 << 26) /* honor PORTS_IMPL */
 #define AHCI_FLAG_IGN_SERR_INTERNAL       (1 << 27) /* ignore SERR_INTERNAL */
 #define AHCI_FLAG_32BIT_ONLY              (1 << 28) /* force 32bit */

 #define ATA_SRST                          (1 << 2)  /* software reset */

 #define STATE_RUN                         0
 #define STATE_RESET                       1

 #define SATA_SCR_SSTATUS_DET_NODEV        0x0
 #define SATA_SCR_SSTATUS_DET_DEV_PRESENT_PHY_UP 0x3

 #define SATA_SCR_SSTATUS_SPD_NODEV        0x00
 #define SATA_SCR_SSTATUS_SPD_GEN1         0x10

 #define SATA_SCR_SSTATUS_IPM_NODEV        0x000
 #define SATA_SCR_SSTATUS_IPM_ACTIVE       0X100

 #define AHCI_SCR_SCTL_DET                 0xf

 #define SATA_FIS_TYPE_REGISTER_H2D        0x27
 #define SATA_FIS_REG_H2D_UPDATE_COMMAND_REGISTER 0x80

 #define AHCI_CMD_HDR_CMD_FIS_LEN           0x1f
 #define AHCI_CMD_HDR_PRDT_LEN              16

 #define SATA_SIGNATURE_CDROM               0xeb140000
 #define SATA_SIGNATURE_DISK                0x00000101

 #define AHCI_GENERIC_HOST_CONTROL_REGS_MAX_ADDR 0x20
                                             /* Shouldn't this be 0x2c? */

 #define AHCI_PORT_REGS_START_ADDR          0x100
 #define AHCI_PORT_ADDR_OFFSET_MASK         0x7f
 #define AHCI_PORT_ADDR_OFFSET_LEN          0x80

 #define AHCI_NUM_COMMAND_SLOTS             31
 #define AHCI_SUPPORTED_SPEED               20
 #define AHCI_SUPPORTED_SPEED_GEN1          1
 #define AHCI_VERSION_1_0                   0x10000

 #define AHCI_PROGMODE_MAJOR_REV_1          1

 #define AHCI_COMMAND_TABLE_ACMD            0x40

 #define IDE_FEATURE_DMA                    1

 #define READ_FPDMA_QUEUED                  0x60
 #define WRITE_FPDMA_QUEUED                 0x61

 #define RES_FIS_DSFIS                      0x00
 #define RES_FIS_PSFIS                      0x20
 #define RES_FIS_RFIS                       0x40
 #define RES_FIS_SDBFIS                     0x58
 #define RES_FIS_UFIS                       0x60

 #define SATA_CAP_SIZE           0x8
 #define SATA_CAP_REV            0x2
 #define SATA_CAP_BAR            0x4

 typedef struct AHCIControlRegs {
     uint32_t    cap;
     uint32_t    ghc;
     uint32_t    irqstatus;
     uint32_t    impl;
     uint32_t    version;
 } AHCIControlRegs;

 typedef struct AHCIPortRegs {
     uint32_t    lst_addr;
     uint32_t    lst_addr_hi;
     uint32_t    fis_addr;
     uint32_t    fis_addr_hi;
     uint32_t    irq_stat;
     uint32_t    irq_mask;
     uint32_t    cmd;
     uint32_t    unused0;
     uint32_t    tfdata;
     uint32_t    sig;
     uint32_t    scr_stat;
     uint32_t    scr_ctl;
     uint32_t    scr_err;
     uint32_t    scr_act;
     uint32_t    cmd_issue;
     uint32_t    reserved;
 } AHCIPortRegs;

 typedef struct AHCICmdHdr {
     uint32_t    opts;
     uint32_t    status;
     uint64_t    tbl_addr;
     uint32_t    reserved[4];
 } QEMU_PACKED AHCICmdHdr;

 typedef struct AHCI_SG {
     uint64_t    addr;
     uint32_t    reserved;
     uint32_t    flags_size;
 } QEMU_PACKED AHCI_SG;

 typedef struct AHCIDevice AHCIDevice;

 typedef struct NCQTransferState {
     AHCIDevice *drive;
     BlockDriverAIOCB *aiocb;
     QEMUSGList sglist;
     BlockAcctCookie acct;
     uint16_t sector_count;
     uint64_t lba;
     uint8_t tag;
     int slot;
     int used;
 } NCQTransferState;

 struct AHCIDevice {
     IDEDMA dma;
     IDEBus port;
     int port_no;
     uint32_t port_state;
     uint32_t finished;
     AHCIPortRegs port_regs;
     struct AHCIState *hba;
     QEMUBH *check_bh;
     uint8_t *lst;
     uint8_t *res_fis;
     bool done_atapi_packet;
     int32_t busy_slot;
     bool init_d2h_sent;
     AHCICmdHdr *cur_cmd;
     NCQTransferState ncq_tfs[AHCI_MAX_CMDS];
 };

 typedef struct AHCIState {
     AHCIDevice *dev;
     AHCIControlRegs control_regs;
     MemoryRegion mem;
     MemoryRegion idp;       /* Index-Data Pair I/O port space */
     unsigned idp_offset;    /* Offset of index in I/O port space */
     uint32_t idp_index;     /* Current IDP index */
     int32_t ports;
     qemu_irq irq;
     AddressSpace *as;
 } AHCIState;

 typedef struct AHCIPCIState {
     /*< private >*/
     PCIDevice parent_obj;
     /*< public >*/

     AHCIState ahci;
 } AHCIPCIState;

 #define TYPE_ICH9_AHCI "ich9-ahci"

 #define ICH_AHCI(obj) \
     OBJECT_CHECK(AHCIPCIState, (obj), TYPE_ICH9_AHCI)

 extern const VMStateDescription vmstate_ahci;

 #define VMSTATE_AHCI(_field, _state) {                               \
     .name       = (stringify(_field)),                               \
     .size       = sizeof(AHCIState),                                 \
     .vmsd       = &vmstate_ahci,                                     \
     .flags      = VMS_STRUCT,                                        \
     .offset     = vmstate_offset_value(_state, _field, AHCIState),   \
 }

 typedef struct NCQFrame {
     uint8_t fis_type;
     uint8_t c;
     uint8_t command;
     uint8_t sector_count_low;
     uint8_t lba0;
     uint8_t lba1;
     uint8_t lba2;
     uint8_t fua;
     uint8_t lba3;
     uint8_t lba4;
     uint8_t lba5;
     uint8_t sector_count_high;
     uint8_t tag;
     uint8_t reserved5;
     uint8_t reserved6;
     uint8_t control;
     uint8_t reserved7;
     uint8_t reserved8;
     uint8_t reserved9;
     uint8_t reserved10;
 } QEMU_PACKED NCQFrame;

 void ahci_init(AHCIState *s, DeviceState *qdev, AddressSpace *as, int ports);
 void ahci_uninit(AHCIState *s);

 void ahci_reset(AHCIState *s);

 #endif /* HW_IDE_AHCI_H */
	/*
	* QEMU AHCI Emulation
	*
	* Copyright (c) 2010 qiaochong@loongson.cn
	* Copyright (c) 2010 Roland Elek <elek.roland@gmail.com>
	* Copyright (c) 2010 Sebastian Herbszt <herbszt@gmx.de>
	* Copyright (c) 2010 Alexander Graf <agraf@suse.de>
	*
	* This library is free software; you can redistribute it and/or
	* modify it under the terms of the GNU Lesser General Public
	* License as published by the Free Software Foundation; either
	* version 2 of the License, or (at your option) any later version.
	*
	* This library is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
	* Lesser General Public License for more details.
	*
	* You should have received a copy of the GNU Lesser General Public
	* License along with this library; if not, see <http://www.gnu.org/licenses/>.
	*
	*/

	#ifndef HW_IDE_AHCI_H
	#define HW_IDE_AHCI_H

	#define AHCI_MEM_BAR_SIZE 0x1000
	#define AHCI_MAX_PORTS 32
	#define AHCI_MAX_SG 168 /* hardware max is 64K */
	#define AHCI_DMA_BOUNDARY 0xffffffff
	#define AHCI_USE_CLUSTERING 0
	#define AHCI_MAX_CMDS 32
	#define AHCI_CMD_SZ 32
	#define AHCI_CMD_SLOT_SZ (AHCI_MAX_CMDS * AHCI_CMD_SZ)
	#define AHCI_RX_FIS_SZ 256
	#define AHCI_CMD_TBL_CDB 0x40
	#define AHCI_CMD_TBL_HDR_SZ 0x80
	#define AHCI_CMD_TBL_SZ (AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16))
	#define AHCI_CMD_TBL_AR_SZ (AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS)
	#define AHCI_PORT_PRIV_DMA_SZ (AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ + \
	AHCI_RX_FIS_SZ)

	#define AHCI_IRQ_ON_SG (1U << 31)
	#define AHCI_CMD_ATAPI (1 << 5)
	#define AHCI_CMD_WRITE (1 << 6)
	#define AHCI_CMD_PREFETCH (1 << 7)
	#define AHCI_CMD_RESET (1 << 8)
	#define AHCI_CMD_CLR_BUSY (1 << 10)

	#define RX_FIS_D2H_REG 0x40 /* offset of D2H Register FIS data */
	#define RX_FIS_SDB 0x58 /* offset of SDB FIS data */
	#define RX_FIS_UNK 0x60 /* offset of Unknown FIS data */

	/* global controller registers */
	#define HOST_CAP 0x00 /* host capabilities */
	#define HOST_CTL 0x04 /* global host control */
	#define HOST_IRQ_STAT 0x08 /* interrupt status */
	#define HOST_PORTS_IMPL 0x0c /* bitmap of implemented ports */
	#define HOST_VERSION 0x10 /* AHCI spec. version compliancy */

	/* HOST_CTL bits */
	#define HOST_CTL_RESET (1 << 0) /* reset controller; self-clear */
	#define HOST_CTL_IRQ_EN (1 << 1) /* global IRQ enable */
	#define HOST_CTL_AHCI_EN (1U << 31) /* AHCI enabled */

	/* HOST_CAP bits */
	#define HOST_CAP_SSC (1 << 14) /* Slumber capable */
	#define HOST_CAP_AHCI (1 << 18) /* AHCI only */
	#define HOST_CAP_CLO (1 << 24) /* Command List Override support */
	#define HOST_CAP_SSS (1 << 27) /* Staggered Spin-up */
	#define HOST_CAP_NCQ (1 << 30) /* Native Command Queueing */
	#define HOST_CAP_64 (1U << 31) /* PCI DAC (64-bit DMA) support */

	/* registers for each SATA port */
	#define PORT_LST_ADDR 0x00 /* command list DMA addr */
	#define PORT_LST_ADDR_HI 0x04 /* command list DMA addr hi */
	#define PORT_FIS_ADDR 0x08 /* FIS rx buf addr */
	#define PORT_FIS_ADDR_HI 0x0c /* FIS rx buf addr hi */
	#define PORT_IRQ_STAT 0x10 /* interrupt status */
	#define PORT_IRQ_MASK 0x14 /* interrupt enable/disable mask */
	#define PORT_CMD 0x18 /* port command */
	#define PORT_TFDATA 0x20 /* taskfile data */
	#define PORT_SIG 0x24 /* device TF signature */
	#define PORT_SCR_STAT 0x28 /* SATA phy register: SStatus */
	#define PORT_SCR_CTL 0x2c /* SATA phy register: SControl */
	#define PORT_SCR_ERR 0x30 /* SATA phy register: SError */
	#define PORT_SCR_ACT 0x34 /* SATA phy register: SActive */
	#define PORT_CMD_ISSUE 0x38 /* command issue */
	#define PORT_RESERVED 0x3c /* reserved */

	/* PORT_IRQ_{STAT,MASK} bits */
	#define PORT_IRQ_COLD_PRES (1U << 31) /* cold presence detect */
	#define PORT_IRQ_TF_ERR (1 << 30) /* task file error */
	#define PORT_IRQ_HBUS_ERR (1 << 29) /* host bus fatal error */
	#define PORT_IRQ_HBUS_DATA_ERR (1 << 28) /* host bus data error */
	#define PORT_IRQ_IF_ERR (1 << 27) /* interface fatal error */
	#define PORT_IRQ_IF_NONFATAL (1 << 26) /* interface non-fatal error */
	#define PORT_IRQ_OVERFLOW (1 << 24) /* xfer exhausted available S/G */
	#define PORT_IRQ_BAD_PMP (1 << 23) /* incorrect port multiplier */

	#define PORT_IRQ_PHYRDY (1 << 22) /* PhyRdy changed */
	#define PORT_IRQ_DEV_ILCK (1 << 7) /* device interlock */
	#define PORT_IRQ_CONNECT (1 << 6) /* port connect change status */
	#define PORT_IRQ_SG_DONE (1 << 5) /* descriptor processed */
	#define PORT_IRQ_UNK_FIS (1 << 4) /* unknown FIS rx'd */
	#define PORT_IRQ_SDB_FIS (1 << 3) /* Set Device Bits FIS rx'd */
	#define PORT_IRQ_DMAS_FIS (1 << 2) /* DMA Setup FIS rx'd */
	#define PORT_IRQ_PIOS_FIS (1 << 1) /* PIO Setup FIS rx'd */
	#define PORT_IRQ_D2H_REG_FIS (1 << 0) /* D2H Register FIS rx'd */

	#define PORT_IRQ_FREEZE (PORT_IRQ_HBUS_ERR \| PORT_IRQ_IF_ERR \| \
	PORT_IRQ_CONNECT \| PORT_IRQ_PHYRDY \| \
	PORT_IRQ_UNK_FIS)
	#define PORT_IRQ_ERROR (PORT_IRQ_FREEZE \| PORT_IRQ_TF_ERR \| \
	PORT_IRQ_HBUS_DATA_ERR)
	#define DEF_PORT_IRQ (PORT_IRQ_ERROR \| PORT_IRQ_SG_DONE \| \
	PORT_IRQ_SDB_FIS \| PORT_IRQ_DMAS_FIS \| \
	PORT_IRQ_PIOS_FIS \| PORT_IRQ_D2H_REG_FIS)

	/* PORT_CMD bits */
	#define PORT_CMD_ATAPI (1 << 24) /* Device is ATAPI */
	#define PORT_CMD_LIST_ON (1 << 15) /* cmd list DMA engine running */
	#define PORT_CMD_FIS_ON (1 << 14) /* FIS DMA engine running */
	#define PORT_CMD_FIS_RX (1 << 4) /* Enable FIS receive DMA engine */
	#define PORT_CMD_CLO (1 << 3) /* Command list override */
	#define PORT_CMD_POWER_ON (1 << 2) /* Power up device */
	#define PORT_CMD_SPIN_UP (1 << 1) /* Spin up device */
	#define PORT_CMD_START (1 << 0) /* Enable port DMA engine */

	#define PORT_CMD_ICC_MASK (0xf << 28) /* i/f ICC state mask */
	#define PORT_CMD_ICC_ACTIVE (0x1 << 28) /* Put i/f in active state */
	#define PORT_CMD_ICC_PARTIAL (0x2 << 28) /* Put i/f in partial state */
	#define PORT_CMD_ICC_SLUMBER (0x6 << 28) /* Put i/f in slumber state */

	#define PORT_IRQ_STAT_DHRS (1 << 0) /* Device to Host Register FIS */
	#define PORT_IRQ_STAT_PSS (1 << 1) /* PIO Setup FIS */
	#define PORT_IRQ_STAT_DSS (1 << 2) /* DMA Setup FIS */
	#define PORT_IRQ_STAT_SDBS (1 << 3) /* Set Device Bits */
	#define PORT_IRQ_STAT_UFS (1 << 4) /* Unknown FIS */
	#define PORT_IRQ_STAT_DPS (1 << 5) /* Descriptor Processed */
	#define PORT_IRQ_STAT_PCS (1 << 6) /* Port Connect Change Status */
	#define PORT_IRQ_STAT_DMPS (1 << 7) /* Device Mechanical Presence
	Status */
	#define PORT_IRQ_STAT_PRCS (1 << 22) /* File Ready Status */
	#define PORT_IRQ_STAT_IPMS (1 << 23) /* Incorrect Port Multiplier
	Status */
	#define PORT_IRQ_STAT_OFS (1 << 24) /* Overflow Status */
	#define PORT_IRQ_STAT_INFS (1 << 26) /* Interface Non-Fatal Error
	Status */
	#define PORT_IRQ_STAT_IFS (1 << 27) /* Interface Fatal Error */
	#define PORT_IRQ_STAT_HBDS (1 << 28) /* Host Bus Data Error Status */
	#define PORT_IRQ_STAT_HBFS (1 << 29) /* Host Bus Fatal Error Status */
	#define PORT_IRQ_STAT_TFES (1 << 30) /* Task File Error Status */
	#define PORT_IRQ_STAT_CPDS (1U << 31) /* Code Port Detect Status */

	/* ap->flags bits */
	#define AHCI_FLAG_NO_NCQ (1 << 24)
	#define AHCI_FLAG_IGN_IRQ_IF_ERR (1 << 25) /* ignore IRQ_IF_ERR */
	#define AHCI_FLAG_HONOR_PI (1 << 26) /* honor PORTS_IMPL */
	#define AHCI_FLAG_IGN_SERR_INTERNAL (1 << 27) /* ignore SERR_INTERNAL */
	#define AHCI_FLAG_32BIT_ONLY (1 << 28) /* force 32bit */

	#define ATA_SRST (1 << 2) /* software reset */

	#define STATE_RUN 0
	#define STATE_RESET 1

	#define SATA_SCR_SSTATUS_DET_NODEV 0x0
	#define SATA_SCR_SSTATUS_DET_DEV_PRESENT_PHY_UP 0x3

	#define SATA_SCR_SSTATUS_SPD_NODEV 0x00
	#define SATA_SCR_SSTATUS_SPD_GEN1 0x10

	#define SATA_SCR_SSTATUS_IPM_NODEV 0x000
	#define SATA_SCR_SSTATUS_IPM_ACTIVE 0X100

	#define AHCI_SCR_SCTL_DET 0xf

	#define SATA_FIS_TYPE_REGISTER_H2D 0x27
	#define SATA_FIS_REG_H2D_UPDATE_COMMAND_REGISTER 0x80

	#define AHCI_CMD_HDR_CMD_FIS_LEN 0x1f
	#define AHCI_CMD_HDR_PRDT_LEN 16

	#define SATA_SIGNATURE_CDROM 0xeb140000
	#define SATA_SIGNATURE_DISK 0x00000101

	#define AHCI_GENERIC_HOST_CONTROL_REGS_MAX_ADDR 0x20
	/* Shouldn't this be 0x2c? */

	#define AHCI_PORT_REGS_START_ADDR 0x100
	#define AHCI_PORT_ADDR_OFFSET_MASK 0x7f
	#define AHCI_PORT_ADDR_OFFSET_LEN 0x80

	#define AHCI_NUM_COMMAND_SLOTS 31
	#define AHCI_SUPPORTED_SPEED 20
	#define AHCI_SUPPORTED_SPEED_GEN1 1
	#define AHCI_VERSION_1_0 0x10000

	#define AHCI_PROGMODE_MAJOR_REV_1 1

	#define AHCI_COMMAND_TABLE_ACMD 0x40

	#define IDE_FEATURE_DMA 1

	#define READ_FPDMA_QUEUED 0x60
	#define WRITE_FPDMA_QUEUED 0x61

	#define RES_FIS_DSFIS 0x00
	#define RES_FIS_PSFIS 0x20
	#define RES_FIS_RFIS 0x40
	#define RES_FIS_SDBFIS 0x58
	#define RES_FIS_UFIS 0x60

	#define SATA_CAP_SIZE 0x8
	#define SATA_CAP_REV 0x2
	#define SATA_CAP_BAR 0x4

	typedef struct AHCIControlRegs {
	uint32_t cap;
	uint32_t ghc;
	uint32_t irqstatus;
	uint32_t impl;
	uint32_t version;
	} AHCIControlRegs;

	typedef struct AHCIPortRegs {
	uint32_t lst_addr;
	uint32_t lst_addr_hi;
	uint32_t fis_addr;
	uint32_t fis_addr_hi;
	uint32_t irq_stat;
	uint32_t irq_mask;
	uint32_t cmd;
	uint32_t unused0;
	uint32_t tfdata;
	uint32_t sig;
	uint32_t scr_stat;
	uint32_t scr_ctl;
	uint32_t scr_err;
	uint32_t scr_act;
	uint32_t cmd_issue;
	uint32_t reserved;
	} AHCIPortRegs;

	typedef struct AHCICmdHdr {
	uint32_t opts;
	uint32_t status;
	uint64_t tbl_addr;
	uint32_t reserved[4];
	} QEMU_PACKED AHCICmdHdr;

	typedef struct AHCI_SG {
	uint64_t addr;
	uint32_t reserved;
	uint32_t flags_size;
	} QEMU_PACKED AHCI_SG;

	typedef struct AHCIDevice AHCIDevice;

	typedef struct NCQTransferState {
	AHCIDevice *drive;
	BlockDriverAIOCB *aiocb;
	QEMUSGList sglist;
	BlockAcctCookie acct;
	uint16_t sector_count;
	uint64_t lba;
	uint8_t tag;
	int slot;
	int used;
	} NCQTransferState;

	struct AHCIDevice {
	IDEDMA dma;
	IDEBus port;
	int port_no;
	uint32_t port_state;
	uint32_t finished;
	AHCIPortRegs port_regs;
	struct AHCIState *hba;
	QEMUBH *check_bh;
	uint8_t *lst;
	uint8_t *res_fis;
	bool done_atapi_packet;
	int32_t busy_slot;
	bool init_d2h_sent;
	AHCICmdHdr *cur_cmd;
	NCQTransferState ncq_tfs[AHCI_MAX_CMDS];
	};

	typedef struct AHCIState {
	AHCIDevice *dev;
	AHCIControlRegs control_regs;
	MemoryRegion mem;
	MemoryRegion idp; /* Index-Data Pair I/O port space */
	unsigned idp_offset; /* Offset of index in I/O port space */
	uint32_t idp_index; /* Current IDP index */
	int32_t ports;
	qemu_irq irq;
	AddressSpace *as;
	} AHCIState;

	typedef struct AHCIPCIState {
	/< private >/
	PCIDevice parent_obj;
	/< public >/

	AHCIState ahci;
	} AHCIPCIState;

	#define TYPE_ICH9_AHCI "ich9-ahci"

	#define ICH_AHCI(obj) \
	OBJECT_CHECK(AHCIPCIState, (obj), TYPE_ICH9_AHCI)

	extern const VMStateDescription vmstate_ahci;

	#define VMSTATE_AHCI(_field, _state) { \
	.name = (stringify(_field)), \
	.size = sizeof(AHCIState), \
	.vmsd = &vmstate_ahci, \
	.flags = VMS_STRUCT, \
	.offset = vmstate_offset_value(_state, _field, AHCIState), \
	}

	typedef struct NCQFrame {
	uint8_t fis_type;
	uint8_t c;
	uint8_t command;
	uint8_t sector_count_low;
	uint8_t lba0;
	uint8_t lba1;
	uint8_t lba2;
	uint8_t fua;
	uint8_t lba3;
	uint8_t lba4;
	uint8_t lba5;
	uint8_t sector_count_high;
	uint8_t tag;
	uint8_t reserved5;
	uint8_t reserved6;
	uint8_t control;
	uint8_t reserved7;
	uint8_t reserved8;
	uint8_t reserved9;
	uint8_t reserved10;
	} QEMU_PACKED NCQFrame;

	void ahci_init(AHCIState s, DeviceState qdev, AddressSpace *as, int ports);
	void ahci_uninit(AHCIState *s);

	void ahci_reset(AHCIState *s);

	#endif /* HW_IDE_AHCI_H */