| /* |
| * QEMU USB OHCI Emulation |
| * Copyright (c) 2004 Gianni Tedesco |
| * Copyright (c) 2006 CodeSourcery |
| * Copyright (c) 2006 Openedhand Ltd. |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Lesser General Public |
| * License as published by the Free Software Foundation; either |
| * version 2 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Lesser General Public License for more details. |
| * |
| * You should have received a copy of the GNU Lesser General Public |
| * License along with this library; if not, see <http://www.gnu.org/licenses/>. |
| * |
| * TODO: |
| * o Isochronous transfers |
| * o Allocate bandwidth in frames properly |
| * o Disable timers when nothing needs to be done, or remove timer usage |
| * all together. |
| * o BIOS work to boot from USB storage |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "hw/hw.h" |
| #include "qapi/error.h" |
| #include "qemu/timer.h" |
| #include "hw/usb.h" |
| #include "hw/pci/pci.h" |
| #include "hw/sysbus.h" |
| #include "hw/qdev-dma.h" |
| #include "trace.h" |
| |
| /* This causes frames to occur 1000x slower */ |
| //#define OHCI_TIME_WARP 1 |
| |
| /* Number of Downstream Ports on the root hub. */ |
| |
| #define OHCI_MAX_PORTS 15 |
| |
| #define ED_LINK_LIMIT 32 |
| |
| static int64_t usb_frame_time; |
| static int64_t usb_bit_time; |
| |
| typedef struct OHCIPort { |
| USBPort port; |
| uint32_t ctrl; |
| } OHCIPort; |
| |
| typedef struct { |
| USBBus bus; |
| qemu_irq irq; |
| MemoryRegion mem; |
| AddressSpace *as; |
| uint32_t num_ports; |
| const char *name; |
| |
| QEMUTimer *eof_timer; |
| int64_t sof_time; |
| |
| /* OHCI state */ |
| /* Control partition */ |
| uint32_t ctl, status; |
| uint32_t intr_status; |
| uint32_t intr; |
| |
| /* memory pointer partition */ |
| uint32_t hcca; |
| uint32_t ctrl_head, ctrl_cur; |
| uint32_t bulk_head, bulk_cur; |
| uint32_t per_cur; |
| uint32_t done; |
| int32_t done_count; |
| |
| /* Frame counter partition */ |
| uint16_t fsmps; |
| uint8_t fit; |
| uint16_t fi; |
| uint8_t frt; |
| uint16_t frame_number; |
| uint16_t padding; |
| uint32_t pstart; |
| uint32_t lst; |
| |
| /* Root Hub partition */ |
| uint32_t rhdesc_a, rhdesc_b; |
| uint32_t rhstatus; |
| OHCIPort rhport[OHCI_MAX_PORTS]; |
| |
| /* PXA27x Non-OHCI events */ |
| uint32_t hstatus; |
| uint32_t hmask; |
| uint32_t hreset; |
| uint32_t htest; |
| |
| /* SM501 local memory offset */ |
| dma_addr_t localmem_base; |
| |
| /* Active packets. */ |
| uint32_t old_ctl; |
| USBPacket usb_packet; |
| uint8_t usb_buf[8192]; |
| uint32_t async_td; |
| bool async_complete; |
| |
| } OHCIState; |
| |
| /* Host Controller Communications Area */ |
| struct ohci_hcca { |
| uint32_t intr[32]; |
| uint16_t frame, pad; |
| uint32_t done; |
| }; |
| #define HCCA_WRITEBACK_OFFSET offsetof(struct ohci_hcca, frame) |
| #define HCCA_WRITEBACK_SIZE 8 /* frame, pad, done */ |
| |
| #define ED_WBACK_OFFSET offsetof(struct ohci_ed, head) |
| #define ED_WBACK_SIZE 4 |
| |
| static void ohci_bus_stop(OHCIState *ohci); |
| static void ohci_async_cancel_device(OHCIState *ohci, USBDevice *dev); |
| |
| /* Bitfields for the first word of an Endpoint Desciptor. */ |
| #define OHCI_ED_FA_SHIFT 0 |
| #define OHCI_ED_FA_MASK (0x7f<<OHCI_ED_FA_SHIFT) |
| #define OHCI_ED_EN_SHIFT 7 |
| #define OHCI_ED_EN_MASK (0xf<<OHCI_ED_EN_SHIFT) |
| #define OHCI_ED_D_SHIFT 11 |
| #define OHCI_ED_D_MASK (3<<OHCI_ED_D_SHIFT) |
| #define OHCI_ED_S (1<<13) |
| #define OHCI_ED_K (1<<14) |
| #define OHCI_ED_F (1<<15) |
| #define OHCI_ED_MPS_SHIFT 16 |
| #define OHCI_ED_MPS_MASK (0x7ff<<OHCI_ED_MPS_SHIFT) |
| |
| /* Flags in the head field of an Endpoint Desciptor. */ |
| #define OHCI_ED_H 1 |
| #define OHCI_ED_C 2 |
| |
| /* Bitfields for the first word of a Transfer Desciptor. */ |
| #define OHCI_TD_R (1<<18) |
| #define OHCI_TD_DP_SHIFT 19 |
| #define OHCI_TD_DP_MASK (3<<OHCI_TD_DP_SHIFT) |
| #define OHCI_TD_DI_SHIFT 21 |
| #define OHCI_TD_DI_MASK (7<<OHCI_TD_DI_SHIFT) |
| #define OHCI_TD_T0 (1<<24) |
| #define OHCI_TD_T1 (1<<25) |
| #define OHCI_TD_EC_SHIFT 26 |
| #define OHCI_TD_EC_MASK (3<<OHCI_TD_EC_SHIFT) |
| #define OHCI_TD_CC_SHIFT 28 |
| #define OHCI_TD_CC_MASK (0xf<<OHCI_TD_CC_SHIFT) |
| |
| /* Bitfields for the first word of an Isochronous Transfer Desciptor. */ |
| /* CC & DI - same as in the General Transfer Desciptor */ |
| #define OHCI_TD_SF_SHIFT 0 |
| #define OHCI_TD_SF_MASK (0xffff<<OHCI_TD_SF_SHIFT) |
| #define OHCI_TD_FC_SHIFT 24 |
| #define OHCI_TD_FC_MASK (7<<OHCI_TD_FC_SHIFT) |
| |
| /* Isochronous Transfer Desciptor - Offset / PacketStatusWord */ |
| #define OHCI_TD_PSW_CC_SHIFT 12 |
| #define OHCI_TD_PSW_CC_MASK (0xf<<OHCI_TD_PSW_CC_SHIFT) |
| #define OHCI_TD_PSW_SIZE_SHIFT 0 |
| #define OHCI_TD_PSW_SIZE_MASK (0xfff<<OHCI_TD_PSW_SIZE_SHIFT) |
| |
| #define OHCI_PAGE_MASK 0xfffff000 |
| #define OHCI_OFFSET_MASK 0xfff |
| |
| #define OHCI_DPTR_MASK 0xfffffff0 |
| |
| #define OHCI_BM(val, field) \ |
| (((val) & OHCI_##field##_MASK) >> OHCI_##field##_SHIFT) |
| |
| #define OHCI_SET_BM(val, field, newval) do { \ |
| val &= ~OHCI_##field##_MASK; \ |
| val |= ((newval) << OHCI_##field##_SHIFT) & OHCI_##field##_MASK; \ |
| } while(0) |
| |
| /* endpoint descriptor */ |
| struct ohci_ed { |
| uint32_t flags; |
| uint32_t tail; |
| uint32_t head; |
| uint32_t next; |
| }; |
| |
| /* General transfer descriptor */ |
| struct ohci_td { |
| uint32_t flags; |
| uint32_t cbp; |
| uint32_t next; |
| uint32_t be; |
| }; |
| |
| /* Isochronous transfer descriptor */ |
| struct ohci_iso_td { |
| uint32_t flags; |
| uint32_t bp; |
| uint32_t next; |
| uint32_t be; |
| uint16_t offset[8]; |
| }; |
| |
| #define USB_HZ 12000000 |
| |
| /* OHCI Local stuff */ |
| #define OHCI_CTL_CBSR ((1<<0)|(1<<1)) |
| #define OHCI_CTL_PLE (1<<2) |
| #define OHCI_CTL_IE (1<<3) |
| #define OHCI_CTL_CLE (1<<4) |
| #define OHCI_CTL_BLE (1<<5) |
| #define OHCI_CTL_HCFS ((1<<6)|(1<<7)) |
| #define OHCI_USB_RESET 0x00 |
| #define OHCI_USB_RESUME 0x40 |
| #define OHCI_USB_OPERATIONAL 0x80 |
| #define OHCI_USB_SUSPEND 0xc0 |
| #define OHCI_CTL_IR (1<<8) |
| #define OHCI_CTL_RWC (1<<9) |
| #define OHCI_CTL_RWE (1<<10) |
| |
| #define OHCI_STATUS_HCR (1<<0) |
| #define OHCI_STATUS_CLF (1<<1) |
| #define OHCI_STATUS_BLF (1<<2) |
| #define OHCI_STATUS_OCR (1<<3) |
| #define OHCI_STATUS_SOC ((1<<6)|(1<<7)) |
| |
| #define OHCI_INTR_SO (1U<<0) /* Scheduling overrun */ |
| #define OHCI_INTR_WD (1U<<1) /* HcDoneHead writeback */ |
| #define OHCI_INTR_SF (1U<<2) /* Start of frame */ |
| #define OHCI_INTR_RD (1U<<3) /* Resume detect */ |
| #define OHCI_INTR_UE (1U<<4) /* Unrecoverable error */ |
| #define OHCI_INTR_FNO (1U<<5) /* Frame number overflow */ |
| #define OHCI_INTR_RHSC (1U<<6) /* Root hub status change */ |
| #define OHCI_INTR_OC (1U<<30) /* Ownership change */ |
| #define OHCI_INTR_MIE (1U<<31) /* Master Interrupt Enable */ |
| |
| #define OHCI_HCCA_SIZE 0x100 |
| #define OHCI_HCCA_MASK 0xffffff00 |
| |
| #define OHCI_EDPTR_MASK 0xfffffff0 |
| |
| #define OHCI_FMI_FI 0x00003fff |
| #define OHCI_FMI_FSMPS 0xffff0000 |
| #define OHCI_FMI_FIT 0x80000000 |
| |
| #define OHCI_FR_RT (1U<<31) |
| |
| #define OHCI_LS_THRESH 0x628 |
| |
| #define OHCI_RHA_RW_MASK 0x00000000 /* Mask of supported features. */ |
| #define OHCI_RHA_PSM (1<<8) |
| #define OHCI_RHA_NPS (1<<9) |
| #define OHCI_RHA_DT (1<<10) |
| #define OHCI_RHA_OCPM (1<<11) |
| #define OHCI_RHA_NOCP (1<<12) |
| #define OHCI_RHA_POTPGT_MASK 0xff000000 |
| |
| #define OHCI_RHS_LPS (1U<<0) |
| #define OHCI_RHS_OCI (1U<<1) |
| #define OHCI_RHS_DRWE (1U<<15) |
| #define OHCI_RHS_LPSC (1U<<16) |
| #define OHCI_RHS_OCIC (1U<<17) |
| #define OHCI_RHS_CRWE (1U<<31) |
| |
| #define OHCI_PORT_CCS (1<<0) |
| #define OHCI_PORT_PES (1<<1) |
| #define OHCI_PORT_PSS (1<<2) |
| #define OHCI_PORT_POCI (1<<3) |
| #define OHCI_PORT_PRS (1<<4) |
| #define OHCI_PORT_PPS (1<<8) |
| #define OHCI_PORT_LSDA (1<<9) |
| #define OHCI_PORT_CSC (1<<16) |
| #define OHCI_PORT_PESC (1<<17) |
| #define OHCI_PORT_PSSC (1<<18) |
| #define OHCI_PORT_OCIC (1<<19) |
| #define OHCI_PORT_PRSC (1<<20) |
| #define OHCI_PORT_WTC (OHCI_PORT_CSC|OHCI_PORT_PESC|OHCI_PORT_PSSC \ |
| |OHCI_PORT_OCIC|OHCI_PORT_PRSC) |
| |
| #define OHCI_TD_DIR_SETUP 0x0 |
| #define OHCI_TD_DIR_OUT 0x1 |
| #define OHCI_TD_DIR_IN 0x2 |
| #define OHCI_TD_DIR_RESERVED 0x3 |
| |
| #define OHCI_CC_NOERROR 0x0 |
| #define OHCI_CC_CRC 0x1 |
| #define OHCI_CC_BITSTUFFING 0x2 |
| #define OHCI_CC_DATATOGGLEMISMATCH 0x3 |
| #define OHCI_CC_STALL 0x4 |
| #define OHCI_CC_DEVICENOTRESPONDING 0x5 |
| #define OHCI_CC_PIDCHECKFAILURE 0x6 |
| #define OHCI_CC_UNDEXPETEDPID 0x7 |
| #define OHCI_CC_DATAOVERRUN 0x8 |
| #define OHCI_CC_DATAUNDERRUN 0x9 |
| #define OHCI_CC_BUFFEROVERRUN 0xc |
| #define OHCI_CC_BUFFERUNDERRUN 0xd |
| |
| #define OHCI_HRESET_FSBIR (1 << 0) |
| |
| static void ohci_die(OHCIState *ohci); |
| |
| /* Update IRQ levels */ |
| static inline void ohci_intr_update(OHCIState *ohci) |
| { |
| int level = 0; |
| |
| if ((ohci->intr & OHCI_INTR_MIE) && |
| (ohci->intr_status & ohci->intr)) |
| level = 1; |
| |
| qemu_set_irq(ohci->irq, level); |
| } |
| |
| /* Set an interrupt */ |
| static inline void ohci_set_interrupt(OHCIState *ohci, uint32_t intr) |
| { |
| ohci->intr_status |= intr; |
| ohci_intr_update(ohci); |
| } |
| |
| /* Attach or detach a device on a root hub port. */ |
| static void ohci_attach(USBPort *port1) |
| { |
| OHCIState *s = port1->opaque; |
| OHCIPort *port = &s->rhport[port1->index]; |
| uint32_t old_state = port->ctrl; |
| |
| /* set connect status */ |
| port->ctrl |= OHCI_PORT_CCS | OHCI_PORT_CSC; |
| |
| /* update speed */ |
| if (port->port.dev->speed == USB_SPEED_LOW) { |
| port->ctrl |= OHCI_PORT_LSDA; |
| } else { |
| port->ctrl &= ~OHCI_PORT_LSDA; |
| } |
| |
| /* notify of remote-wakeup */ |
| if ((s->ctl & OHCI_CTL_HCFS) == OHCI_USB_SUSPEND) { |
| ohci_set_interrupt(s, OHCI_INTR_RD); |
| } |
| |
| trace_usb_ohci_port_attach(port1->index); |
| |
| if (old_state != port->ctrl) { |
| ohci_set_interrupt(s, OHCI_INTR_RHSC); |
| } |
| } |
| |
| static void ohci_detach(USBPort *port1) |
| { |
| OHCIState *s = port1->opaque; |
| OHCIPort *port = &s->rhport[port1->index]; |
| uint32_t old_state = port->ctrl; |
| |
| ohci_async_cancel_device(s, port1->dev); |
| |
| /* set connect status */ |
| if (port->ctrl & OHCI_PORT_CCS) { |
| port->ctrl &= ~OHCI_PORT_CCS; |
| port->ctrl |= OHCI_PORT_CSC; |
| } |
| /* disable port */ |
| if (port->ctrl & OHCI_PORT_PES) { |
| port->ctrl &= ~OHCI_PORT_PES; |
| port->ctrl |= OHCI_PORT_PESC; |
| } |
| trace_usb_ohci_port_detach(port1->index); |
| |
| if (old_state != port->ctrl) { |
| ohci_set_interrupt(s, OHCI_INTR_RHSC); |
| } |
| } |
| |
| static void ohci_wakeup(USBPort *port1) |
| { |
| OHCIState *s = port1->opaque; |
| OHCIPort *port = &s->rhport[port1->index]; |
| uint32_t intr = 0; |
| if (port->ctrl & OHCI_PORT_PSS) { |
| trace_usb_ohci_port_wakeup(port1->index); |
| port->ctrl |= OHCI_PORT_PSSC; |
| port->ctrl &= ~OHCI_PORT_PSS; |
| intr = OHCI_INTR_RHSC; |
| } |
| /* Note that the controller can be suspended even if this port is not */ |
| if ((s->ctl & OHCI_CTL_HCFS) == OHCI_USB_SUSPEND) { |
| trace_usb_ohci_remote_wakeup(s->name); |
| /* This is the one state transition the controller can do by itself */ |
| s->ctl &= ~OHCI_CTL_HCFS; |
| s->ctl |= OHCI_USB_RESUME; |
| /* In suspend mode only ResumeDetected is possible, not RHSC: |
| * see the OHCI spec 5.1.2.3. |
| */ |
| intr = OHCI_INTR_RD; |
| } |
| ohci_set_interrupt(s, intr); |
| } |
| |
| static void ohci_child_detach(USBPort *port1, USBDevice *child) |
| { |
| OHCIState *s = port1->opaque; |
| |
| ohci_async_cancel_device(s, child); |
| } |
| |
| static USBDevice *ohci_find_device(OHCIState *ohci, uint8_t addr) |
| { |
| USBDevice *dev; |
| int i; |
| |
| for (i = 0; i < ohci->num_ports; i++) { |
| if ((ohci->rhport[i].ctrl & OHCI_PORT_PES) == 0) { |
| continue; |
| } |
| dev = usb_find_device(&ohci->rhport[i].port, addr); |
| if (dev != NULL) { |
| return dev; |
| } |
| } |
| return NULL; |
| } |
| |
| static void ohci_stop_endpoints(OHCIState *ohci) |
| { |
| USBDevice *dev; |
| int i, j; |
| |
| for (i = 0; i < ohci->num_ports; i++) { |
| dev = ohci->rhport[i].port.dev; |
| if (dev && dev->attached) { |
| usb_device_ep_stopped(dev, &dev->ep_ctl); |
| for (j = 0; j < USB_MAX_ENDPOINTS; j++) { |
| usb_device_ep_stopped(dev, &dev->ep_in[j]); |
| usb_device_ep_stopped(dev, &dev->ep_out[j]); |
| } |
| } |
| } |
| } |
| |
| static void ohci_roothub_reset(OHCIState *ohci) |
| { |
| OHCIPort *port; |
| int i; |
| |
| ohci_bus_stop(ohci); |
| ohci->rhdesc_a = OHCI_RHA_NPS | ohci->num_ports; |
| ohci->rhdesc_b = 0x0; /* Impl. specific */ |
| ohci->rhstatus = 0; |
| |
| for (i = 0; i < ohci->num_ports; i++) { |
| port = &ohci->rhport[i]; |
| port->ctrl = 0; |
| if (port->port.dev && port->port.dev->attached) { |
| usb_port_reset(&port->port); |
| } |
| } |
| if (ohci->async_td) { |
| usb_cancel_packet(&ohci->usb_packet); |
| ohci->async_td = 0; |
| } |
| ohci_stop_endpoints(ohci); |
| } |
| |
| /* Reset the controller */ |
| static void ohci_soft_reset(OHCIState *ohci) |
| { |
| trace_usb_ohci_reset(ohci->name); |
| |
| ohci_bus_stop(ohci); |
| ohci->ctl = (ohci->ctl & OHCI_CTL_IR) | OHCI_USB_SUSPEND; |
| ohci->old_ctl = 0; |
| ohci->status = 0; |
| ohci->intr_status = 0; |
| ohci->intr = OHCI_INTR_MIE; |
| |
| ohci->hcca = 0; |
| ohci->ctrl_head = ohci->ctrl_cur = 0; |
| ohci->bulk_head = ohci->bulk_cur = 0; |
| ohci->per_cur = 0; |
| ohci->done = 0; |
| ohci->done_count = 7; |
| |
| /* FSMPS is marked TBD in OCHI 1.0, what gives ffs? |
| * I took the value linux sets ... |
| */ |
| ohci->fsmps = 0x2778; |
| ohci->fi = 0x2edf; |
| ohci->fit = 0; |
| ohci->frt = 0; |
| ohci->frame_number = 0; |
| ohci->pstart = 0; |
| ohci->lst = OHCI_LS_THRESH; |
| } |
| |
| static void ohci_hard_reset(OHCIState *ohci) |
| { |
| ohci_soft_reset(ohci); |
| ohci->ctl = 0; |
| ohci_roothub_reset(ohci); |
| } |
| |
| /* Get an array of dwords from main memory */ |
| static inline int get_dwords(OHCIState *ohci, |
| dma_addr_t addr, uint32_t *buf, int num) |
| { |
| int i; |
| |
| addr += ohci->localmem_base; |
| |
| for (i = 0; i < num; i++, buf++, addr += sizeof(*buf)) { |
| if (dma_memory_read(ohci->as, addr, buf, sizeof(*buf))) { |
| return -1; |
| } |
| *buf = le32_to_cpu(*buf); |
| } |
| |
| return 0; |
| } |
| |
| /* Put an array of dwords in to main memory */ |
| static inline int put_dwords(OHCIState *ohci, |
| dma_addr_t addr, uint32_t *buf, int num) |
| { |
| int i; |
| |
| addr += ohci->localmem_base; |
| |
| for (i = 0; i < num; i++, buf++, addr += sizeof(*buf)) { |
| uint32_t tmp = cpu_to_le32(*buf); |
| if (dma_memory_write(ohci->as, addr, &tmp, sizeof(tmp))) { |
| return -1; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* Get an array of words from main memory */ |
| static inline int get_words(OHCIState *ohci, |
| dma_addr_t addr, uint16_t *buf, int num) |
| { |
| int i; |
| |
| addr += ohci->localmem_base; |
| |
| for (i = 0; i < num; i++, buf++, addr += sizeof(*buf)) { |
| if (dma_memory_read(ohci->as, addr, buf, sizeof(*buf))) { |
| return -1; |
| } |
| *buf = le16_to_cpu(*buf); |
| } |
| |
| return 0; |
| } |
| |
| /* Put an array of words in to main memory */ |
| static inline int put_words(OHCIState *ohci, |
| dma_addr_t addr, uint16_t *buf, int num) |
| { |
| int i; |
| |
| addr += ohci->localmem_base; |
| |
| for (i = 0; i < num; i++, buf++, addr += sizeof(*buf)) { |
| uint16_t tmp = cpu_to_le16(*buf); |
| if (dma_memory_write(ohci->as, addr, &tmp, sizeof(tmp))) { |
| return -1; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static inline int ohci_read_ed(OHCIState *ohci, |
| dma_addr_t addr, struct ohci_ed *ed) |
| { |
| return get_dwords(ohci, addr, (uint32_t *)ed, sizeof(*ed) >> 2); |
| } |
| |
| static inline int ohci_read_td(OHCIState *ohci, |
| dma_addr_t addr, struct ohci_td *td) |
| { |
| return get_dwords(ohci, addr, (uint32_t *)td, sizeof(*td) >> 2); |
| } |
| |
| static inline int ohci_read_iso_td(OHCIState *ohci, |
| dma_addr_t addr, struct ohci_iso_td *td) |
| { |
| return get_dwords(ohci, addr, (uint32_t *)td, 4) || |
| get_words(ohci, addr + 16, td->offset, 8); |
| } |
| |
| static inline int ohci_read_hcca(OHCIState *ohci, |
| dma_addr_t addr, struct ohci_hcca *hcca) |
| { |
| return dma_memory_read(ohci->as, addr + ohci->localmem_base, |
| hcca, sizeof(*hcca)); |
| } |
| |
| static inline int ohci_put_ed(OHCIState *ohci, |
| dma_addr_t addr, struct ohci_ed *ed) |
| { |
| /* ed->tail is under control of the HCD. |
| * Since just ed->head is changed by HC, just write back this |
| */ |
| |
| return put_dwords(ohci, addr + ED_WBACK_OFFSET, |
| (uint32_t *)((char *)ed + ED_WBACK_OFFSET), |
| ED_WBACK_SIZE >> 2); |
| } |
| |
| static inline int ohci_put_td(OHCIState *ohci, |
| dma_addr_t addr, struct ohci_td *td) |
| { |
| return put_dwords(ohci, addr, (uint32_t *)td, sizeof(*td) >> 2); |
| } |
| |
| static inline int ohci_put_iso_td(OHCIState *ohci, |
| dma_addr_t addr, struct ohci_iso_td *td) |
| { |
| return put_dwords(ohci, addr, (uint32_t *)td, 4) || |
| put_words(ohci, addr + 16, td->offset, 8); |
| } |
| |
| static inline int ohci_put_hcca(OHCIState *ohci, |
| dma_addr_t addr, struct ohci_hcca *hcca) |
| { |
| return dma_memory_write(ohci->as, |
| addr + ohci->localmem_base + HCCA_WRITEBACK_OFFSET, |
| (char *)hcca + HCCA_WRITEBACK_OFFSET, |
| HCCA_WRITEBACK_SIZE); |
| } |
| |
| /* Read/Write the contents of a TD from/to main memory. */ |
| static int ohci_copy_td(OHCIState *ohci, struct ohci_td *td, |
| uint8_t *buf, int len, DMADirection dir) |
| { |
| dma_addr_t ptr, n; |
| |
| ptr = td->cbp; |
| n = 0x1000 - (ptr & 0xfff); |
| if (n > len) |
| n = len; |
| |
| if (dma_memory_rw(ohci->as, ptr + ohci->localmem_base, buf, n, dir)) { |
| return -1; |
| } |
| if (n == len) { |
| return 0; |
| } |
| ptr = td->be & ~0xfffu; |
| buf += n; |
| if (dma_memory_rw(ohci->as, ptr + ohci->localmem_base, buf, |
| len - n, dir)) { |
| return -1; |
| } |
| return 0; |
| } |
| |
| /* Read/Write the contents of an ISO TD from/to main memory. */ |
| static int ohci_copy_iso_td(OHCIState *ohci, |
| uint32_t start_addr, uint32_t end_addr, |
| uint8_t *buf, int len, DMADirection dir) |
| { |
| dma_addr_t ptr, n; |
| |
| ptr = start_addr; |
| n = 0x1000 - (ptr & 0xfff); |
| if (n > len) |
| n = len; |
| |
| if (dma_memory_rw(ohci->as, ptr + ohci->localmem_base, buf, n, dir)) { |
| return -1; |
| } |
| if (n == len) { |
| return 0; |
| } |
| ptr = end_addr & ~0xfffu; |
| buf += n; |
| if (dma_memory_rw(ohci->as, ptr + ohci->localmem_base, buf, |
| len - n, dir)) { |
| return -1; |
| } |
| return 0; |
| } |
| |
| static void ohci_process_lists(OHCIState *ohci, int completion); |
| |
| static void ohci_async_complete_packet(USBPort *port, USBPacket *packet) |
| { |
| OHCIState *ohci = container_of(packet, OHCIState, usb_packet); |
| |
| trace_usb_ohci_async_complete(); |
| ohci->async_complete = true; |
| ohci_process_lists(ohci, 1); |
| } |
| |
| #define USUB(a, b) ((int16_t)((uint16_t)(a) - (uint16_t)(b))) |
| |
| static int ohci_service_iso_td(OHCIState *ohci, struct ohci_ed *ed, |
| int completion) |
| { |
| int dir; |
| size_t len = 0; |
| const char *str = NULL; |
| int pid; |
| int ret; |
| int i; |
| USBDevice *dev; |
| USBEndpoint *ep; |
| struct ohci_iso_td iso_td; |
| uint32_t addr; |
| uint16_t starting_frame; |
| int16_t relative_frame_number; |
| int frame_count; |
| uint32_t start_offset, next_offset, end_offset = 0; |
| uint32_t start_addr, end_addr; |
| |
| addr = ed->head & OHCI_DPTR_MASK; |
| |
| if (ohci_read_iso_td(ohci, addr, &iso_td)) { |
| trace_usb_ohci_iso_td_read_failed(addr); |
| ohci_die(ohci); |
| return 1; |
| } |
| |
| starting_frame = OHCI_BM(iso_td.flags, TD_SF); |
| frame_count = OHCI_BM(iso_td.flags, TD_FC); |
| relative_frame_number = USUB(ohci->frame_number, starting_frame); |
| |
| trace_usb_ohci_iso_td_head( |
| ed->head & OHCI_DPTR_MASK, ed->tail & OHCI_DPTR_MASK, |
| iso_td.flags, iso_td.bp, iso_td.next, iso_td.be, |
| ohci->frame_number, starting_frame, |
| frame_count, relative_frame_number); |
| trace_usb_ohci_iso_td_head_offset( |
| iso_td.offset[0], iso_td.offset[1], |
| iso_td.offset[2], iso_td.offset[3], |
| iso_td.offset[4], iso_td.offset[5], |
| iso_td.offset[6], iso_td.offset[7]); |
| |
| if (relative_frame_number < 0) { |
| trace_usb_ohci_iso_td_relative_frame_number_neg(relative_frame_number); |
| return 1; |
| } else if (relative_frame_number > frame_count) { |
| /* ISO TD expired - retire the TD to the Done Queue and continue with |
| the next ISO TD of the same ED */ |
| trace_usb_ohci_iso_td_relative_frame_number_big(relative_frame_number, |
| frame_count); |
| OHCI_SET_BM(iso_td.flags, TD_CC, OHCI_CC_DATAOVERRUN); |
| ed->head &= ~OHCI_DPTR_MASK; |
| ed->head |= (iso_td.next & OHCI_DPTR_MASK); |
| iso_td.next = ohci->done; |
| ohci->done = addr; |
| i = OHCI_BM(iso_td.flags, TD_DI); |
| if (i < ohci->done_count) |
| ohci->done_count = i; |
| if (ohci_put_iso_td(ohci, addr, &iso_td)) { |
| ohci_die(ohci); |
| return 1; |
| } |
| return 0; |
| } |
| |
| dir = OHCI_BM(ed->flags, ED_D); |
| switch (dir) { |
| case OHCI_TD_DIR_IN: |
| str = "in"; |
| pid = USB_TOKEN_IN; |
| break; |
| case OHCI_TD_DIR_OUT: |
| str = "out"; |
| pid = USB_TOKEN_OUT; |
| break; |
| case OHCI_TD_DIR_SETUP: |
| str = "setup"; |
| pid = USB_TOKEN_SETUP; |
| break; |
| default: |
| trace_usb_ohci_iso_td_bad_direction(dir); |
| return 1; |
| } |
| |
| if (!iso_td.bp || !iso_td.be) { |
| trace_usb_ohci_iso_td_bad_bp_be(iso_td.bp, iso_td.be); |
| return 1; |
| } |
| |
| start_offset = iso_td.offset[relative_frame_number]; |
| next_offset = iso_td.offset[relative_frame_number + 1]; |
| |
| if (!(OHCI_BM(start_offset, TD_PSW_CC) & 0xe) || |
| ((relative_frame_number < frame_count) && |
| !(OHCI_BM(next_offset, TD_PSW_CC) & 0xe))) { |
| trace_usb_ohci_iso_td_bad_cc_not_accessed(start_offset, next_offset); |
| return 1; |
| } |
| |
| if ((relative_frame_number < frame_count) && (start_offset > next_offset)) { |
| trace_usb_ohci_iso_td_bad_cc_overrun(start_offset, next_offset); |
| return 1; |
| } |
| |
| if ((start_offset & 0x1000) == 0) { |
| start_addr = (iso_td.bp & OHCI_PAGE_MASK) | |
| (start_offset & OHCI_OFFSET_MASK); |
| } else { |
| start_addr = (iso_td.be & OHCI_PAGE_MASK) | |
| (start_offset & OHCI_OFFSET_MASK); |
| } |
| |
| if (relative_frame_number < frame_count) { |
| end_offset = next_offset - 1; |
| if ((end_offset & 0x1000) == 0) { |
| end_addr = (iso_td.bp & OHCI_PAGE_MASK) | |
| (end_offset & OHCI_OFFSET_MASK); |
| } else { |
| end_addr = (iso_td.be & OHCI_PAGE_MASK) | |
| (end_offset & OHCI_OFFSET_MASK); |
| } |
| } else { |
| /* Last packet in the ISO TD */ |
| end_addr = iso_td.be; |
| } |
| |
| if ((start_addr & OHCI_PAGE_MASK) != (end_addr & OHCI_PAGE_MASK)) { |
| len = (end_addr & OHCI_OFFSET_MASK) + 0x1001 |
| - (start_addr & OHCI_OFFSET_MASK); |
| } else { |
| len = end_addr - start_addr + 1; |
| } |
| |
| if (len && dir != OHCI_TD_DIR_IN) { |
| if (ohci_copy_iso_td(ohci, start_addr, end_addr, ohci->usb_buf, len, |
| DMA_DIRECTION_TO_DEVICE)) { |
| ohci_die(ohci); |
| return 1; |
| } |
| } |
| |
| if (!completion) { |
| bool int_req = relative_frame_number == frame_count && |
| OHCI_BM(iso_td.flags, TD_DI) == 0; |
| dev = ohci_find_device(ohci, OHCI_BM(ed->flags, ED_FA)); |
| ep = usb_ep_get(dev, pid, OHCI_BM(ed->flags, ED_EN)); |
| usb_packet_setup(&ohci->usb_packet, pid, ep, 0, addr, false, int_req); |
| usb_packet_addbuf(&ohci->usb_packet, ohci->usb_buf, len); |
| usb_handle_packet(dev, &ohci->usb_packet); |
| if (ohci->usb_packet.status == USB_RET_ASYNC) { |
| usb_device_flush_ep_queue(dev, ep); |
| return 1; |
| } |
| } |
| if (ohci->usb_packet.status == USB_RET_SUCCESS) { |
| ret = ohci->usb_packet.actual_length; |
| } else { |
| ret = ohci->usb_packet.status; |
| } |
| |
| trace_usb_ohci_iso_td_so(start_offset, end_offset, start_addr, end_addr, |
| str, len, ret); |
| |
| /* Writeback */ |
| if (dir == OHCI_TD_DIR_IN && ret >= 0 && ret <= len) { |
| /* IN transfer succeeded */ |
| if (ohci_copy_iso_td(ohci, start_addr, end_addr, ohci->usb_buf, ret, |
| DMA_DIRECTION_FROM_DEVICE)) { |
| ohci_die(ohci); |
| return 1; |
| } |
| OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, |
| OHCI_CC_NOERROR); |
| OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE, ret); |
| } else if (dir == OHCI_TD_DIR_OUT && ret == len) { |
| /* OUT transfer succeeded */ |
| OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, |
| OHCI_CC_NOERROR); |
| OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE, 0); |
| } else { |
| if (ret > (ssize_t) len) { |
| trace_usb_ohci_iso_td_data_overrun(ret, len); |
| OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, |
| OHCI_CC_DATAOVERRUN); |
| OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE, |
| len); |
| } else if (ret >= 0) { |
| trace_usb_ohci_iso_td_data_underrun(ret); |
| OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, |
| OHCI_CC_DATAUNDERRUN); |
| } else { |
| switch (ret) { |
| case USB_RET_IOERROR: |
| case USB_RET_NODEV: |
| OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, |
| OHCI_CC_DEVICENOTRESPONDING); |
| OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE, |
| 0); |
| break; |
| case USB_RET_NAK: |
| case USB_RET_STALL: |
| trace_usb_ohci_iso_td_nak(ret); |
| OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, |
| OHCI_CC_STALL); |
| OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE, |
| 0); |
| break; |
| default: |
| trace_usb_ohci_iso_td_bad_response(ret); |
| OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, |
| OHCI_CC_UNDEXPETEDPID); |
| break; |
| } |
| } |
| } |
| |
| if (relative_frame_number == frame_count) { |
| /* Last data packet of ISO TD - retire the TD to the Done Queue */ |
| OHCI_SET_BM(iso_td.flags, TD_CC, OHCI_CC_NOERROR); |
| ed->head &= ~OHCI_DPTR_MASK; |
| ed->head |= (iso_td.next & OHCI_DPTR_MASK); |
| iso_td.next = ohci->done; |
| ohci->done = addr; |
| i = OHCI_BM(iso_td.flags, TD_DI); |
| if (i < ohci->done_count) |
| ohci->done_count = i; |
| } |
| if (ohci_put_iso_td(ohci, addr, &iso_td)) { |
| ohci_die(ohci); |
| } |
| return 1; |
| } |
| |
| static void ohci_td_pkt(const char *msg, const uint8_t *buf, size_t len) |
| { |
| bool print16; |
| bool printall; |
| const int width = 16; |
| int i; |
| char tmp[3 * width + 1]; |
| char *p = tmp; |
| |
| print16 = !!trace_event_get_state_backends(TRACE_USB_OHCI_TD_PKT_SHORT); |
| printall = !!trace_event_get_state_backends(TRACE_USB_OHCI_TD_PKT_FULL); |
| |
| if (!printall && !print16) { |
| return; |
| } |
| |
| for (i = 0; ; i++) { |
| if (i && (!(i % width) || (i == len))) { |
| if (!printall) { |
| trace_usb_ohci_td_pkt_short(msg, tmp); |
| break; |
| } |
| trace_usb_ohci_td_pkt_full(msg, tmp); |
| p = tmp; |
| *p = 0; |
| } |
| if (i == len) { |
| break; |
| } |
| |
| p += sprintf(p, " %.2x", buf[i]); |
| } |
| } |
| |
| /* Service a transport descriptor. |
| Returns nonzero to terminate processing of this endpoint. */ |
| |
| static int ohci_service_td(OHCIState *ohci, struct ohci_ed *ed) |
| { |
| int dir; |
| size_t len = 0, pktlen = 0; |
| const char *str = NULL; |
| int pid; |
| int ret; |
| int i; |
| USBDevice *dev; |
| USBEndpoint *ep; |
| struct ohci_td td; |
| uint32_t addr; |
| int flag_r; |
| int completion; |
| |
| addr = ed->head & OHCI_DPTR_MASK; |
| /* See if this TD has already been submitted to the device. */ |
| completion = (addr == ohci->async_td); |
| if (completion && !ohci->async_complete) { |
| trace_usb_ohci_td_skip_async(); |
| return 1; |
| } |
| if (ohci_read_td(ohci, addr, &td)) { |
| trace_usb_ohci_td_read_error(addr); |
| ohci_die(ohci); |
| return 1; |
| } |
| |
| dir = OHCI_BM(ed->flags, ED_D); |
| switch (dir) { |
| case OHCI_TD_DIR_OUT: |
| case OHCI_TD_DIR_IN: |
| /* Same value. */ |
| break; |
| default: |
| dir = OHCI_BM(td.flags, TD_DP); |
| break; |
| } |
| |
| switch (dir) { |
| case OHCI_TD_DIR_IN: |
| str = "in"; |
| pid = USB_TOKEN_IN; |
| break; |
| case OHCI_TD_DIR_OUT: |
| str = "out"; |
| pid = USB_TOKEN_OUT; |
| break; |
| case OHCI_TD_DIR_SETUP: |
| str = "setup"; |
| pid = USB_TOKEN_SETUP; |
| break; |
| default: |
| trace_usb_ohci_td_bad_direction(dir); |
| return 1; |
| } |
| if (td.cbp && td.be) { |
| if ((td.cbp & 0xfffff000) != (td.be & 0xfffff000)) { |
| len = (td.be & 0xfff) + 0x1001 - (td.cbp & 0xfff); |
| } else { |
| len = (td.be - td.cbp) + 1; |
| } |
| |
| pktlen = len; |
| if (len && dir != OHCI_TD_DIR_IN) { |
| /* The endpoint may not allow us to transfer it all now */ |
| pktlen = (ed->flags & OHCI_ED_MPS_MASK) >> OHCI_ED_MPS_SHIFT; |
| if (pktlen > len) { |
| pktlen = len; |
| } |
| if (!completion) { |
| if (ohci_copy_td(ohci, &td, ohci->usb_buf, pktlen, |
| DMA_DIRECTION_TO_DEVICE)) { |
| ohci_die(ohci); |
| } |
| } |
| } |
| } |
| |
| flag_r = (td.flags & OHCI_TD_R) != 0; |
| trace_usb_ohci_td_pkt_hdr(addr, (int64_t)pktlen, (int64_t)len, str, |
| flag_r, td.cbp, td.be); |
| ohci_td_pkt("OUT", ohci->usb_buf, pktlen); |
| |
| if (completion) { |
| ohci->async_td = 0; |
| ohci->async_complete = false; |
| } else { |
| if (ohci->async_td) { |
| /* ??? The hardware should allow one active packet per |
| endpoint. We only allow one active packet per controller. |
| This should be sufficient as long as devices respond in a |
| timely manner. |
| */ |
| trace_usb_ohci_td_too_many_pending(); |
| return 1; |
| } |
| dev = ohci_find_device(ohci, OHCI_BM(ed->flags, ED_FA)); |
| ep = usb_ep_get(dev, pid, OHCI_BM(ed->flags, ED_EN)); |
| usb_packet_setup(&ohci->usb_packet, pid, ep, 0, addr, !flag_r, |
| OHCI_BM(td.flags, TD_DI) == 0); |
| usb_packet_addbuf(&ohci->usb_packet, ohci->usb_buf, pktlen); |
| usb_handle_packet(dev, &ohci->usb_packet); |
| trace_usb_ohci_td_packet_status(ohci->usb_packet.status); |
| |
| if (ohci->usb_packet.status == USB_RET_ASYNC) { |
| usb_device_flush_ep_queue(dev, ep); |
| ohci->async_td = addr; |
| return 1; |
| } |
| } |
| if (ohci->usb_packet.status == USB_RET_SUCCESS) { |
| ret = ohci->usb_packet.actual_length; |
| } else { |
| ret = ohci->usb_packet.status; |
| } |
| |
| if (ret >= 0) { |
| if (dir == OHCI_TD_DIR_IN) { |
| if (ohci_copy_td(ohci, &td, ohci->usb_buf, ret, |
| DMA_DIRECTION_FROM_DEVICE)) { |
| ohci_die(ohci); |
| } |
| ohci_td_pkt("IN", ohci->usb_buf, pktlen); |
| } else { |
| ret = pktlen; |
| } |
| } |
| |
| /* Writeback */ |
| if (ret == pktlen || (dir == OHCI_TD_DIR_IN && ret >= 0 && flag_r)) { |
| /* Transmission succeeded. */ |
| if (ret == len) { |
| td.cbp = 0; |
| } else { |
| if ((td.cbp & 0xfff) + ret > 0xfff) { |
| td.cbp = (td.be & ~0xfff) + ((td.cbp + ret) & 0xfff); |
| } else { |
| td.cbp += ret; |
| } |
| } |
| td.flags |= OHCI_TD_T1; |
| td.flags ^= OHCI_TD_T0; |
| OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_NOERROR); |
| OHCI_SET_BM(td.flags, TD_EC, 0); |
| |
| if ((dir != OHCI_TD_DIR_IN) && (ret != len)) { |
| /* Partial packet transfer: TD not ready to retire yet */ |
| goto exit_no_retire; |
| } |
| |
| /* Setting ED_C is part of the TD retirement process */ |
| ed->head &= ~OHCI_ED_C; |
| if (td.flags & OHCI_TD_T0) |
| ed->head |= OHCI_ED_C; |
| } else { |
| if (ret >= 0) { |
| trace_usb_ohci_td_underrun(); |
| OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_DATAUNDERRUN); |
| } else { |
| switch (ret) { |
| case USB_RET_IOERROR: |
| case USB_RET_NODEV: |
| trace_usb_ohci_td_dev_error(); |
| OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_DEVICENOTRESPONDING); |
| break; |
| case USB_RET_NAK: |
| trace_usb_ohci_td_nak(); |
| return 1; |
| case USB_RET_STALL: |
| trace_usb_ohci_td_stall(); |
| OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_STALL); |
| break; |
| case USB_RET_BABBLE: |
| trace_usb_ohci_td_babble(); |
| OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_DATAOVERRUN); |
| break; |
| default: |
| trace_usb_ohci_td_bad_device_response(ret); |
| OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_UNDEXPETEDPID); |
| OHCI_SET_BM(td.flags, TD_EC, 3); |
| break; |
| } |
| /* An error occured so we have to clear the interrupt counter. See |
| * spec at 6.4.4 on page 104 */ |
| ohci->done_count = 0; |
| } |
| ed->head |= OHCI_ED_H; |
| } |
| |
| /* Retire this TD */ |
| ed->head &= ~OHCI_DPTR_MASK; |
| ed->head |= td.next & OHCI_DPTR_MASK; |
| td.next = ohci->done; |
| ohci->done = addr; |
| i = OHCI_BM(td.flags, TD_DI); |
| if (i < ohci->done_count) |
| ohci->done_count = i; |
| exit_no_retire: |
| if (ohci_put_td(ohci, addr, &td)) { |
| ohci_die(ohci); |
| return 1; |
| } |
| return OHCI_BM(td.flags, TD_CC) != OHCI_CC_NOERROR; |
| } |
| |
| /* Service an endpoint list. Returns nonzero if active TD were found. */ |
| static int ohci_service_ed_list(OHCIState *ohci, uint32_t head, int completion) |
| { |
| struct ohci_ed ed; |
| uint32_t next_ed; |
| uint32_t cur; |
| int active; |
| uint32_t link_cnt = 0; |
| active = 0; |
| |
| if (head == 0) |
| return 0; |
| |
| for (cur = head; cur; cur = next_ed) { |
| if (ohci_read_ed(ohci, cur, &ed)) { |
| trace_usb_ohci_ed_read_error(cur); |
| ohci_die(ohci); |
| return 0; |
| } |
| |
| next_ed = ed.next & OHCI_DPTR_MASK; |
| |
| if (++link_cnt > ED_LINK_LIMIT) { |
| ohci_die(ohci); |
| return 0; |
| } |
| |
| if ((ed.head & OHCI_ED_H) || (ed.flags & OHCI_ED_K)) { |
| uint32_t addr; |
| /* Cancel pending packets for ED that have been paused. */ |
| addr = ed.head & OHCI_DPTR_MASK; |
| if (ohci->async_td && addr == ohci->async_td) { |
| usb_cancel_packet(&ohci->usb_packet); |
| ohci->async_td = 0; |
| usb_device_ep_stopped(ohci->usb_packet.ep->dev, |
| ohci->usb_packet.ep); |
| } |
| continue; |
| } |
| |
| while ((ed.head & OHCI_DPTR_MASK) != ed.tail) { |
| trace_usb_ohci_ed_pkt(cur, (ed.head & OHCI_ED_H) != 0, |
| (ed.head & OHCI_ED_C) != 0, ed.head & OHCI_DPTR_MASK, |
| ed.tail & OHCI_DPTR_MASK, ed.next & OHCI_DPTR_MASK); |
| trace_usb_ohci_ed_pkt_flags( |
| OHCI_BM(ed.flags, ED_FA), OHCI_BM(ed.flags, ED_EN), |
| OHCI_BM(ed.flags, ED_D), (ed.flags & OHCI_ED_S)!= 0, |
| (ed.flags & OHCI_ED_K) != 0, (ed.flags & OHCI_ED_F) != 0, |
| OHCI_BM(ed.flags, ED_MPS)); |
| |
| active = 1; |
| |
| if ((ed.flags & OHCI_ED_F) == 0) { |
| if (ohci_service_td(ohci, &ed)) |
| break; |
| } else { |
| /* Handle isochronous endpoints */ |
| if (ohci_service_iso_td(ohci, &ed, completion)) |
| break; |
| } |
| } |
| |
| if (ohci_put_ed(ohci, cur, &ed)) { |
| ohci_die(ohci); |
| return 0; |
| } |
| } |
| |
| return active; |
| } |
| |
| /* set a timer for EOF */ |
| static void ohci_eof_timer(OHCIState *ohci) |
| { |
| timer_mod(ohci->eof_timer, ohci->sof_time + usb_frame_time); |
| } |
| /* Set a timer for EOF and generate a SOF event */ |
| static void ohci_sof(OHCIState *ohci) |
| { |
| ohci->sof_time += usb_frame_time; |
| ohci_eof_timer(ohci); |
| ohci_set_interrupt(ohci, OHCI_INTR_SF); |
| } |
| |
| /* Process Control and Bulk lists. */ |
| static void ohci_process_lists(OHCIState *ohci, int completion) |
| { |
| if ((ohci->ctl & OHCI_CTL_CLE) && (ohci->status & OHCI_STATUS_CLF)) { |
| if (ohci->ctrl_cur && ohci->ctrl_cur != ohci->ctrl_head) { |
| trace_usb_ohci_process_lists(ohci->ctrl_head, ohci->ctrl_cur); |
| } |
| if (!ohci_service_ed_list(ohci, ohci->ctrl_head, completion)) { |
| ohci->ctrl_cur = 0; |
| ohci->status &= ~OHCI_STATUS_CLF; |
| } |
| } |
| |
| if ((ohci->ctl & OHCI_CTL_BLE) && (ohci->status & OHCI_STATUS_BLF)) { |
| if (!ohci_service_ed_list(ohci, ohci->bulk_head, completion)) { |
| ohci->bulk_cur = 0; |
| ohci->status &= ~OHCI_STATUS_BLF; |
| } |
| } |
| } |
| |
| /* Do frame processing on frame boundary */ |
| static void ohci_frame_boundary(void *opaque) |
| { |
| OHCIState *ohci = opaque; |
| struct ohci_hcca hcca; |
| |
| if (ohci_read_hcca(ohci, ohci->hcca, &hcca)) { |
| trace_usb_ohci_hcca_read_error(ohci->hcca); |
| ohci_die(ohci); |
| return; |
| } |
| |
| /* Process all the lists at the end of the frame */ |
| if (ohci->ctl & OHCI_CTL_PLE) { |
| int n; |
| |
| n = ohci->frame_number & 0x1f; |
| ohci_service_ed_list(ohci, le32_to_cpu(hcca.intr[n]), 0); |
| } |
| |
| /* Cancel all pending packets if either of the lists has been disabled. */ |
| if (ohci->old_ctl & (~ohci->ctl) & (OHCI_CTL_BLE | OHCI_CTL_CLE)) { |
| if (ohci->async_td) { |
| usb_cancel_packet(&ohci->usb_packet); |
| ohci->async_td = 0; |
| } |
| ohci_stop_endpoints(ohci); |
| } |
| ohci->old_ctl = ohci->ctl; |
| ohci_process_lists(ohci, 0); |
| |
| /* Stop if UnrecoverableError happened or ohci_sof will crash */ |
| if (ohci->intr_status & OHCI_INTR_UE) { |
| return; |
| } |
| |
| /* Frame boundary, so do EOF stuf here */ |
| ohci->frt = ohci->fit; |
| |
| /* Increment frame number and take care of endianness. */ |
| ohci->frame_number = (ohci->frame_number + 1) & 0xffff; |
| hcca.frame = cpu_to_le16(ohci->frame_number); |
| |
| if (ohci->done_count == 0 && !(ohci->intr_status & OHCI_INTR_WD)) { |
| if (!ohci->done) |
| abort(); |
| if (ohci->intr & ohci->intr_status) |
| ohci->done |= 1; |
| hcca.done = cpu_to_le32(ohci->done); |
| ohci->done = 0; |
| ohci->done_count = 7; |
| ohci_set_interrupt(ohci, OHCI_INTR_WD); |
| } |
| |
| if (ohci->done_count != 7 && ohci->done_count != 0) |
| ohci->done_count--; |
| |
| /* Do SOF stuff here */ |
| ohci_sof(ohci); |
| |
| /* Writeback HCCA */ |
| if (ohci_put_hcca(ohci, ohci->hcca, &hcca)) { |
| ohci_die(ohci); |
| } |
| } |
| |
| /* Start sending SOF tokens across the USB bus, lists are processed in |
| * next frame |
| */ |
| static int ohci_bus_start(OHCIState *ohci) |
| { |
| trace_usb_ohci_start(ohci->name); |
| |
| /* Delay the first SOF event by one frame time as |
| * linux driver is not ready to receive it and |
| * can meet some race conditions |
| */ |
| |
| ohci->sof_time = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); |
| ohci_eof_timer(ohci); |
| |
| return 1; |
| } |
| |
| /* Stop sending SOF tokens on the bus */ |
| static void ohci_bus_stop(OHCIState *ohci) |
| { |
| trace_usb_ohci_stop(ohci->name); |
| timer_del(ohci->eof_timer); |
| } |
| |
| /* Sets a flag in a port status register but only set it if the port is |
| * connected, if not set ConnectStatusChange flag. If flag is enabled |
| * return 1. |
| */ |
| static int ohci_port_set_if_connected(OHCIState *ohci, int i, uint32_t val) |
| { |
| int ret = 1; |
| |
| /* writing a 0 has no effect */ |
| if (val == 0) |
| return 0; |
| |
| /* If CurrentConnectStatus is cleared we set |
| * ConnectStatusChange |
| */ |
| if (!(ohci->rhport[i].ctrl & OHCI_PORT_CCS)) { |
| ohci->rhport[i].ctrl |= OHCI_PORT_CSC; |
| if (ohci->rhstatus & OHCI_RHS_DRWE) { |
| /* TODO: CSC is a wakeup event */ |
| } |
| return 0; |
| } |
| |
| if (ohci->rhport[i].ctrl & val) |
| ret = 0; |
| |
| /* set the bit */ |
| ohci->rhport[i].ctrl |= val; |
| |
| return ret; |
| } |
| |
| /* Set the frame interval - frame interval toggle is manipulated by the hcd only */ |
| static void ohci_set_frame_interval(OHCIState *ohci, uint16_t val) |
| { |
| val &= OHCI_FMI_FI; |
| |
| if (val != ohci->fi) { |
| trace_usb_ohci_set_frame_interval(ohci->name, ohci->fi, ohci->fi); |
| } |
| |
| ohci->fi = val; |
| } |
| |
| static void ohci_port_power(OHCIState *ohci, int i, int p) |
| { |
| if (p) { |
| ohci->rhport[i].ctrl |= OHCI_PORT_PPS; |
| } else { |
| ohci->rhport[i].ctrl &= ~(OHCI_PORT_PPS| |
| OHCI_PORT_CCS| |
| OHCI_PORT_PSS| |
| OHCI_PORT_PRS); |
| } |
| } |
| |
| /* Set HcControlRegister */ |
| static void ohci_set_ctl(OHCIState *ohci, uint32_t val) |
| { |
| uint32_t old_state; |
| uint32_t new_state; |
| |
| old_state = ohci->ctl & OHCI_CTL_HCFS; |
| ohci->ctl = val; |
| new_state = ohci->ctl & OHCI_CTL_HCFS; |
| |
| /* no state change */ |
| if (old_state == new_state) |
| return; |
| |
| trace_usb_ohci_set_ctl(ohci->name, new_state); |
| switch (new_state) { |
| case OHCI_USB_OPERATIONAL: |
| ohci_bus_start(ohci); |
| break; |
| case OHCI_USB_SUSPEND: |
| ohci_bus_stop(ohci); |
| /* clear pending SF otherwise linux driver loops in ohci_irq() */ |
| ohci->intr_status &= ~OHCI_INTR_SF; |
| ohci_intr_update(ohci); |
| break; |
| case OHCI_USB_RESUME: |
| trace_usb_ohci_resume(ohci->name); |
| break; |
| case OHCI_USB_RESET: |
| ohci_roothub_reset(ohci); |
| break; |
| } |
| } |
| |
| static uint32_t ohci_get_frame_remaining(OHCIState *ohci) |
| { |
| uint16_t fr; |
| int64_t tks; |
| |
| if ((ohci->ctl & OHCI_CTL_HCFS) != OHCI_USB_OPERATIONAL) |
| return (ohci->frt << 31); |
| |
| /* Being in USB operational state guarnatees sof_time was |
| * set already. |
| */ |
| tks = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) - ohci->sof_time; |
| if (tks < 0) { |
| tks = 0; |
| } |
| |
| /* avoid muldiv if possible */ |
| if (tks >= usb_frame_time) |
| return (ohci->frt << 31); |
| |
| tks = tks / usb_bit_time; |
| fr = (uint16_t)(ohci->fi - tks); |
| |
| return (ohci->frt << 31) | fr; |
| } |
| |
| |
| /* Set root hub status */ |
| static void ohci_set_hub_status(OHCIState *ohci, uint32_t val) |
| { |
| uint32_t old_state; |
| |
| old_state = ohci->rhstatus; |
| |
| /* write 1 to clear OCIC */ |
| if (val & OHCI_RHS_OCIC) |
| ohci->rhstatus &= ~OHCI_RHS_OCIC; |
| |
| if (val & OHCI_RHS_LPS) { |
| int i; |
| |
| for (i = 0; i < ohci->num_ports; i++) |
| ohci_port_power(ohci, i, 0); |
| trace_usb_ohci_hub_power_down(); |
| } |
| |
| if (val & OHCI_RHS_LPSC) { |
| int i; |
| |
| for (i = 0; i < ohci->num_ports; i++) |
| ohci_port_power(ohci, i, 1); |
| trace_usb_ohci_hub_power_up(); |
| } |
| |
| if (val & OHCI_RHS_DRWE) |
| ohci->rhstatus |= OHCI_RHS_DRWE; |
| |
| if (val & OHCI_RHS_CRWE) |
| ohci->rhstatus &= ~OHCI_RHS_DRWE; |
| |
| if (old_state != ohci->rhstatus) |
| ohci_set_interrupt(ohci, OHCI_INTR_RHSC); |
| } |
| |
| /* Set root hub port status */ |
| static void ohci_port_set_status(OHCIState *ohci, int portnum, uint32_t val) |
| { |
| uint32_t old_state; |
| OHCIPort *port; |
| |
| port = &ohci->rhport[portnum]; |
| old_state = port->ctrl; |
| |
| /* Write to clear CSC, PESC, PSSC, OCIC, PRSC */ |
| if (val & OHCI_PORT_WTC) |
| port->ctrl &= ~(val & OHCI_PORT_WTC); |
| |
| if (val & OHCI_PORT_CCS) |
| port->ctrl &= ~OHCI_PORT_PES; |
| |
| ohci_port_set_if_connected(ohci, portnum, val & OHCI_PORT_PES); |
| |
| if (ohci_port_set_if_connected(ohci, portnum, val & OHCI_PORT_PSS)) { |
| trace_usb_ohci_port_suspend(portnum); |
| } |
| |
| if (ohci_port_set_if_connected(ohci, portnum, val & OHCI_PORT_PRS)) { |
| trace_usb_ohci_port_reset(portnum); |
| usb_device_reset(port->port.dev); |
| port->ctrl &= ~OHCI_PORT_PRS; |
| /* ??? Should this also set OHCI_PORT_PESC. */ |
| port->ctrl |= OHCI_PORT_PES | OHCI_PORT_PRSC; |
| } |
| |
| /* Invert order here to ensure in ambiguous case, device is |
| * powered up... |
| */ |
| if (val & OHCI_PORT_LSDA) |
| ohci_port_power(ohci, portnum, 0); |
| if (val & OHCI_PORT_PPS) |
| ohci_port_power(ohci, portnum, 1); |
| |
| if (old_state != port->ctrl) |
| ohci_set_interrupt(ohci, OHCI_INTR_RHSC); |
| } |
| |
| static uint64_t ohci_mem_read(void *opaque, |
| hwaddr addr, |
| unsigned size) |
| { |
| OHCIState *ohci = opaque; |
| uint32_t retval; |
| |
| /* Only aligned reads are allowed on OHCI */ |
| if (addr & 3) { |
| trace_usb_ohci_mem_read_unaligned(addr); |
| return 0xffffffff; |
| } else if (addr >= 0x54 && addr < 0x54 + ohci->num_ports * 4) { |
| /* HcRhPortStatus */ |
| retval = ohci->rhport[(addr - 0x54) >> 2].ctrl | OHCI_PORT_PPS; |
| } else { |
| switch (addr >> 2) { |
| case 0: /* HcRevision */ |
| retval = 0x10; |
| break; |
| |
| case 1: /* HcControl */ |
| retval = ohci->ctl; |
| break; |
| |
| case 2: /* HcCommandStatus */ |
| retval = ohci->status; |
| break; |
| |
| case 3: /* HcInterruptStatus */ |
| retval = ohci->intr_status; |
| break; |
| |
| case 4: /* HcInterruptEnable */ |
| case 5: /* HcInterruptDisable */ |
| retval = ohci->intr; |
| break; |
| |
| case 6: /* HcHCCA */ |
| retval = ohci->hcca; |
| break; |
| |
| case 7: /* HcPeriodCurrentED */ |
| retval = ohci->per_cur; |
| break; |
| |
| case 8: /* HcControlHeadED */ |
| retval = ohci->ctrl_head; |
| break; |
| |
| case 9: /* HcControlCurrentED */ |
| retval = ohci->ctrl_cur; |
| break; |
| |
| case 10: /* HcBulkHeadED */ |
| retval = ohci->bulk_head; |
| break; |
| |
| case 11: /* HcBulkCurrentED */ |
| retval = ohci->bulk_cur; |
| break; |
| |
| case 12: /* HcDoneHead */ |
| retval = ohci->done; |
| break; |
| |
| case 13: /* HcFmInterretval */ |
| retval = (ohci->fit << 31) | (ohci->fsmps << 16) | (ohci->fi); |
| break; |
| |
| case 14: /* HcFmRemaining */ |
| retval = ohci_get_frame_remaining(ohci); |
| break; |
| |
| case 15: /* HcFmNumber */ |
| retval = ohci->frame_number; |
| break; |
| |
| case 16: /* HcPeriodicStart */ |
| retval = ohci->pstart; |
| break; |
| |
| case 17: /* HcLSThreshold */ |
| retval = ohci->lst; |
| break; |
| |
| case 18: /* HcRhDescriptorA */ |
| retval = ohci->rhdesc_a; |
| break; |
| |
| case 19: /* HcRhDescriptorB */ |
| retval = ohci->rhdesc_b; |
| break; |
| |
| case 20: /* HcRhStatus */ |
| retval = ohci->rhstatus; |
| break; |
| |
| /* PXA27x specific registers */ |
| case 24: /* HcStatus */ |
| retval = ohci->hstatus & ohci->hmask; |
| break; |
| |
| case 25: /* HcHReset */ |
| retval = ohci->hreset; |
| break; |
| |
| case 26: /* HcHInterruptEnable */ |
| retval = ohci->hmask; |
| break; |
| |
| case 27: /* HcHInterruptTest */ |
| retval = ohci->htest; |
| break; |
| |
| default: |
| trace_usb_ohci_mem_read_bad_offset(addr); |
| retval = 0xffffffff; |
| } |
| } |
| |
| return retval; |
| } |
| |
| static void ohci_mem_write(void *opaque, |
| hwaddr addr, |
| uint64_t val, |
| unsigned size) |
| { |
| OHCIState *ohci = opaque; |
| |
| /* Only aligned reads are allowed on OHCI */ |
| if (addr & 3) { |
| trace_usb_ohci_mem_write_unaligned(addr); |
| return; |
| } |
| |
| if (addr >= 0x54 && addr < 0x54 + ohci->num_ports * 4) { |
| /* HcRhPortStatus */ |
| ohci_port_set_status(ohci, (addr - 0x54) >> 2, val); |
| return; |
| } |
| |
| switch (addr >> 2) { |
| case 1: /* HcControl */ |
| ohci_set_ctl(ohci, val); |
| break; |
| |
| case 2: /* HcCommandStatus */ |
| /* SOC is read-only */ |
| val = (val & ~OHCI_STATUS_SOC); |
| |
| /* Bits written as '0' remain unchanged in the register */ |
| ohci->status |= val; |
| |
| if (ohci->status & OHCI_STATUS_HCR) |
| ohci_soft_reset(ohci); |
| break; |
| |
| case 3: /* HcInterruptStatus */ |
| ohci->intr_status &= ~val; |
| ohci_intr_update(ohci); |
| break; |
| |
| case 4: /* HcInterruptEnable */ |
| ohci->intr |= val; |
| ohci_intr_update(ohci); |
| break; |
| |
| case 5: /* HcInterruptDisable */ |
| ohci->intr &= ~val; |
| ohci_intr_update(ohci); |
| break; |
| |
| case 6: /* HcHCCA */ |
| ohci->hcca = val & OHCI_HCCA_MASK; |
| break; |
| |
| case 7: /* HcPeriodCurrentED */ |
| /* Ignore writes to this read-only register, Linux does them */ |
| break; |
| |
| case 8: /* HcControlHeadED */ |
| ohci->ctrl_head = val & OHCI_EDPTR_MASK; |
| break; |
| |
| case 9: /* HcControlCurrentED */ |
| ohci->ctrl_cur = val & OHCI_EDPTR_MASK; |
| break; |
| |
| case 10: /* HcBulkHeadED */ |
| ohci->bulk_head = val & OHCI_EDPTR_MASK; |
| break; |
| |
| case 11: /* HcBulkCurrentED */ |
| ohci->bulk_cur = val & OHCI_EDPTR_MASK; |
| break; |
| |
| case 13: /* HcFmInterval */ |
| ohci->fsmps = (val & OHCI_FMI_FSMPS) >> 16; |
| ohci->fit = (val & OHCI_FMI_FIT) >> 31; |
| ohci_set_frame_interval(ohci, val); |
| break; |
| |
| case 15: /* HcFmNumber */ |
| break; |
| |
| case 16: /* HcPeriodicStart */ |
| ohci->pstart = val & 0xffff; |
| break; |
| |
| case 17: /* HcLSThreshold */ |
| ohci->lst = val & 0xffff; |
| break; |
| |
| case 18: /* HcRhDescriptorA */ |
| ohci->rhdesc_a &= ~OHCI_RHA_RW_MASK; |
| ohci->rhdesc_a |= val & OHCI_RHA_RW_MASK; |
| break; |
| |
| case 19: /* HcRhDescriptorB */ |
| break; |
| |
| case 20: /* HcRhStatus */ |
| ohci_set_hub_status(ohci, val); |
| break; |
| |
| /* PXA27x specific registers */ |
| case 24: /* HcStatus */ |
| ohci->hstatus &= ~(val & ohci->hmask); |
| break; |
| |
| case 25: /* HcHReset */ |
| ohci->hreset = val & ~OHCI_HRESET_FSBIR; |
| if (val & OHCI_HRESET_FSBIR) |
| ohci_hard_reset(ohci); |
| break; |
| |
| case 26: /* HcHInterruptEnable */ |
| ohci->hmask = val; |
| break; |
| |
| case 27: /* HcHInterruptTest */ |
| ohci->htest = val; |
| break; |
| |
| default: |
| trace_usb_ohci_mem_write_bad_offset(addr); |
| break; |
| } |
| } |
| |
| static void ohci_async_cancel_device(OHCIState *ohci, USBDevice *dev) |
| { |
| if (ohci->async_td && |
| usb_packet_is_inflight(&ohci->usb_packet) && |
| ohci->usb_packet.ep->dev == dev) { |
| usb_cancel_packet(&ohci->usb_packet); |
| ohci->async_td = 0; |
| } |
| } |
| |
| static const MemoryRegionOps ohci_mem_ops = { |
| .read = ohci_mem_read, |
| .write = ohci_mem_write, |
| .endianness = DEVICE_LITTLE_ENDIAN, |
| }; |
| |
| static USBPortOps ohci_port_ops = { |
| .attach = ohci_attach, |
| .detach = ohci_detach, |
| .child_detach = ohci_child_detach, |
| .wakeup = ohci_wakeup, |
| .complete = ohci_async_complete_packet, |
| }; |
| |
| static USBBusOps ohci_bus_ops = { |
| }; |
| |
| static void usb_ohci_init(OHCIState *ohci, DeviceState *dev, |
| uint32_t num_ports, dma_addr_t localmem_base, |
| char *masterbus, uint32_t firstport, |
| AddressSpace *as, Error **errp) |
| { |
| Error *err = NULL; |
| int i; |
| |
| ohci->as = as; |
| |
| if (num_ports > OHCI_MAX_PORTS) { |
| error_setg(errp, "OHCI num-ports=%u is too big (limit is %u ports)", |
| num_ports, OHCI_MAX_PORTS); |
| return; |
| } |
| |
| if (usb_frame_time == 0) { |
| #ifdef OHCI_TIME_WARP |
| usb_frame_time = NANOSECONDS_PER_SECOND; |
| usb_bit_time = NANOSECONDS_PER_SECOND / (USB_HZ / 1000); |
| #else |
| usb_frame_time = NANOSECONDS_PER_SECOND / 1000; |
| if (NANOSECONDS_PER_SECOND >= USB_HZ) { |
| usb_bit_time = NANOSECONDS_PER_SECOND / USB_HZ; |
| } else { |
| usb_bit_time = 1; |
| } |
| #endif |
| trace_usb_ohci_init_time(usb_frame_time, usb_bit_time); |
| } |
| |
| ohci->num_ports = num_ports; |
| if (masterbus) { |
| USBPort *ports[OHCI_MAX_PORTS]; |
| for(i = 0; i < num_ports; i++) { |
| ports[i] = &ohci->rhport[i].port; |
| } |
| usb_register_companion(masterbus, ports, num_ports, |
| firstport, ohci, &ohci_port_ops, |
| USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL, |
| &err); |
| if (err) { |
| error_propagate(errp, err); |
| return; |
| } |
| } else { |
| usb_bus_new(&ohci->bus, sizeof(ohci->bus), &ohci_bus_ops, dev); |
| for (i = 0; i < num_ports; i++) { |
| usb_register_port(&ohci->bus, &ohci->rhport[i].port, |
| ohci, i, &ohci_port_ops, |
| USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL); |
| } |
| } |
| |
| memory_region_init_io(&ohci->mem, OBJECT(dev), &ohci_mem_ops, |
| ohci, "ohci", 256); |
| ohci->localmem_base = localmem_base; |
| |
| ohci->name = object_get_typename(OBJECT(dev)); |
| usb_packet_init(&ohci->usb_packet); |
| |
| ohci->async_td = 0; |
| |
| ohci->eof_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, |
| ohci_frame_boundary, ohci); |
| } |
| |
| #define TYPE_PCI_OHCI "pci-ohci" |
| #define PCI_OHCI(obj) OBJECT_CHECK(OHCIPCIState, (obj), TYPE_PCI_OHCI) |
| |
| typedef struct { |
| /*< private >*/ |
| PCIDevice parent_obj; |
| /*< public >*/ |
| |
| OHCIState state; |
| char *masterbus; |
| uint32_t num_ports; |
| uint32_t firstport; |
| } OHCIPCIState; |
| |
| /** A typical O/EHCI will stop operating, set itself into error state |
| * (which can be queried by MMIO) and will set PERR in its config |
| * space to signal that it got an error |
| */ |
| static void ohci_die(OHCIState *ohci) |
| { |
| OHCIPCIState *dev = container_of(ohci, OHCIPCIState, state); |
| |
| trace_usb_ohci_die(); |
| |
| ohci_set_interrupt(ohci, OHCI_INTR_UE); |
| ohci_bus_stop(ohci); |
| pci_set_word(dev->parent_obj.config + PCI_STATUS, |
| PCI_STATUS_DETECTED_PARITY); |
| } |
| |
| static void usb_ohci_realize_pci(PCIDevice *dev, Error **errp) |
| { |
| Error *err = NULL; |
| OHCIPCIState *ohci = PCI_OHCI(dev); |
| |
| dev->config[PCI_CLASS_PROG] = 0x10; /* OHCI */ |
| dev->config[PCI_INTERRUPT_PIN] = 0x01; /* interrupt pin A */ |
| |
| usb_ohci_init(&ohci->state, DEVICE(dev), ohci->num_ports, 0, |
| ohci->masterbus, ohci->firstport, |
| pci_get_address_space(dev), &err); |
| if (err) { |
| error_propagate(errp, err); |
| return; |
| } |
| |
| ohci->state.irq = pci_allocate_irq(dev); |
| pci_register_bar(dev, 0, 0, &ohci->state.mem); |
| } |
| |
| static void usb_ohci_exit(PCIDevice *dev) |
| { |
| OHCIPCIState *ohci = PCI_OHCI(dev); |
| OHCIState *s = &ohci->state; |
| |
| trace_usb_ohci_exit(s->name); |
| ohci_bus_stop(s); |
| |
| if (s->async_td) { |
| usb_cancel_packet(&s->usb_packet); |
| s->async_td = 0; |
| } |
| ohci_stop_endpoints(s); |
| |
| if (!ohci->masterbus) { |
| usb_bus_release(&s->bus); |
| } |
| |
| timer_del(s->eof_timer); |
| timer_free(s->eof_timer); |
| } |
| |
| static void usb_ohci_reset_pci(DeviceState *d) |
| { |
| PCIDevice *dev = PCI_DEVICE(d); |
| OHCIPCIState *ohci = PCI_OHCI(dev); |
| OHCIState *s = &ohci->state; |
| |
| ohci_hard_reset(s); |
| } |
| |
| #define TYPE_SYSBUS_OHCI "sysbus-ohci" |
| #define SYSBUS_OHCI(obj) OBJECT_CHECK(OHCISysBusState, (obj), TYPE_SYSBUS_OHCI) |
| |
| typedef struct { |
| /*< private >*/ |
| SysBusDevice parent_obj; |
| /*< public >*/ |
| |
| OHCIState ohci; |
| char *masterbus; |
| uint32_t num_ports; |
| uint32_t firstport; |
| dma_addr_t dma_offset; |
| } OHCISysBusState; |
| |
| static void ohci_realize_pxa(DeviceState *dev, Error **errp) |
| { |
| OHCISysBusState *s = SYSBUS_OHCI(dev); |
| SysBusDevice *sbd = SYS_BUS_DEVICE(dev); |
| Error *err = NULL; |
| |
| usb_ohci_init(&s->ohci, dev, s->num_ports, s->dma_offset, |
| s->masterbus, s->firstport, |
| &address_space_memory, &err); |
| if (err) { |
| error_propagate(errp, err); |
| return; |
| } |
| sysbus_init_irq(sbd, &s->ohci.irq); |
| sysbus_init_mmio(sbd, &s->ohci.mem); |
| } |
| |
| static void usb_ohci_reset_sysbus(DeviceState *dev) |
| { |
| OHCISysBusState *s = SYSBUS_OHCI(dev); |
| OHCIState *ohci = &s->ohci; |
| |
| ohci_hard_reset(ohci); |
| } |
| |
| static Property ohci_pci_properties[] = { |
| DEFINE_PROP_STRING("masterbus", OHCIPCIState, masterbus), |
| DEFINE_PROP_UINT32("num-ports", OHCIPCIState, num_ports, 3), |
| DEFINE_PROP_UINT32("firstport", OHCIPCIState, firstport, 0), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static const VMStateDescription vmstate_ohci_state_port = { |
| .name = "ohci-core/port", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (VMStateField[]) { |
| VMSTATE_UINT32(ctrl, OHCIPort), |
| VMSTATE_END_OF_LIST() |
| }, |
| }; |
| |
| static bool ohci_eof_timer_needed(void *opaque) |
| { |
| OHCIState *ohci = opaque; |
| |
| return timer_pending(ohci->eof_timer); |
| } |
| |
| static const VMStateDescription vmstate_ohci_eof_timer = { |
| .name = "ohci-core/eof-timer", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .needed = ohci_eof_timer_needed, |
| .fields = (VMStateField[]) { |
| VMSTATE_TIMER_PTR(eof_timer, OHCIState), |
| VMSTATE_END_OF_LIST() |
| }, |
| }; |
| |
| static const VMStateDescription vmstate_ohci_state = { |
| .name = "ohci-core", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (VMStateField[]) { |
| VMSTATE_INT64(sof_time, OHCIState), |
| VMSTATE_UINT32(ctl, OHCIState), |
| VMSTATE_UINT32(status, OHCIState), |
| VMSTATE_UINT32(intr_status, OHCIState), |
| VMSTATE_UINT32(intr, OHCIState), |
| VMSTATE_UINT32(hcca, OHCIState), |
| VMSTATE_UINT32(ctrl_head, OHCIState), |
| VMSTATE_UINT32(ctrl_cur, OHCIState), |
| VMSTATE_UINT32(bulk_head, OHCIState), |
| VMSTATE_UINT32(bulk_cur, OHCIState), |
| VMSTATE_UINT32(per_cur, OHCIState), |
| VMSTATE_UINT32(done, OHCIState), |
| VMSTATE_INT32(done_count, OHCIState), |
| VMSTATE_UINT16(fsmps, OHCIState), |
| VMSTATE_UINT8(fit, OHCIState), |
| VMSTATE_UINT16(fi, OHCIState), |
| VMSTATE_UINT8(frt, OHCIState), |
| VMSTATE_UINT16(frame_number, OHCIState), |
| VMSTATE_UINT16(padding, OHCIState), |
| VMSTATE_UINT32(pstart, OHCIState), |
| VMSTATE_UINT32(lst, OHCIState), |
| VMSTATE_UINT32(rhdesc_a, OHCIState), |
| VMSTATE_UINT32(rhdesc_b, OHCIState), |
| VMSTATE_UINT32(rhstatus, OHCIState), |
| VMSTATE_STRUCT_ARRAY(rhport, OHCIState, OHCI_MAX_PORTS, 0, |
| vmstate_ohci_state_port, OHCIPort), |
| VMSTATE_UINT32(hstatus, OHCIState), |
| VMSTATE_UINT32(hmask, OHCIState), |
| VMSTATE_UINT32(hreset, OHCIState), |
| VMSTATE_UINT32(htest, OHCIState), |
| VMSTATE_UINT32(old_ctl, OHCIState), |
| VMSTATE_UINT8_ARRAY(usb_buf, OHCIState, 8192), |
| VMSTATE_UINT32(async_td, OHCIState), |
| VMSTATE_BOOL(async_complete, OHCIState), |
| VMSTATE_END_OF_LIST() |
| }, |
| .subsections = (const VMStateDescription*[]) { |
| &vmstate_ohci_eof_timer, |
| NULL |
| } |
| }; |
| |
| static const VMStateDescription vmstate_ohci = { |
| .name = "ohci", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (VMStateField[]) { |
| VMSTATE_PCI_DEVICE(parent_obj, OHCIPCIState), |
| VMSTATE_STRUCT(state, OHCIPCIState, 1, vmstate_ohci_state, OHCIState), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static void ohci_pci_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); |
| |
| k->realize = usb_ohci_realize_pci; |
| k->exit = usb_ohci_exit; |
| k->vendor_id = PCI_VENDOR_ID_APPLE; |
| k->device_id = PCI_DEVICE_ID_APPLE_IPID_USB; |
| k->class_id = PCI_CLASS_SERIAL_USB; |
| set_bit(DEVICE_CATEGORY_USB, dc->categories); |
| dc->desc = "Apple USB Controller"; |
| dc->props = ohci_pci_properties; |
| dc->hotpluggable = false; |
| dc->vmsd = &vmstate_ohci; |
| dc->reset = usb_ohci_reset_pci; |
| } |
| |
| static const TypeInfo ohci_pci_info = { |
| .name = TYPE_PCI_OHCI, |
| .parent = TYPE_PCI_DEVICE, |
| .instance_size = sizeof(OHCIPCIState), |
| .class_init = ohci_pci_class_init, |
| .interfaces = (InterfaceInfo[]) { |
| { INTERFACE_CONVENTIONAL_PCI_DEVICE }, |
| { }, |
| }, |
| }; |
| |
| static Property ohci_sysbus_properties[] = { |
| DEFINE_PROP_STRING("masterbus", OHCISysBusState, masterbus), |
| DEFINE_PROP_UINT32("num-ports", OHCISysBusState, num_ports, 3), |
| DEFINE_PROP_UINT32("firstport", OHCISysBusState, firstport, 0), |
| DEFINE_PROP_DMAADDR("dma-offset", OHCISysBusState, dma_offset, 0), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void ohci_sysbus_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| |
| dc->realize = ohci_realize_pxa; |
| set_bit(DEVICE_CATEGORY_USB, dc->categories); |
| dc->desc = "OHCI USB Controller"; |
| dc->props = ohci_sysbus_properties; |
| dc->reset = usb_ohci_reset_sysbus; |
| } |
| |
| static const TypeInfo ohci_sysbus_info = { |
| .name = TYPE_SYSBUS_OHCI, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(OHCISysBusState), |
| .class_init = ohci_sysbus_class_init, |
| }; |
| |
| static void ohci_register_types(void) |
| { |
| type_register_static(&ohci_pci_info); |
| type_register_static(&ohci_sysbus_info); |
| } |
| |
| type_init(ohci_register_types) |