| /* |
| * QEMU SCI/SCIF serial port emulation |
| * |
| * Copyright (c) 2007 Magnus Damm |
| * |
| * Based on serial.c - QEMU 16450 UART emulation |
| * Copyright (c) 2003-2004 Fabrice Bellard |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| #include "hw.h" |
| #include "sh.h" |
| #include "qemu-char.h" |
| #include "exec-memory.h" |
| |
| //#define DEBUG_SERIAL |
| |
| #define SH_SERIAL_FLAG_TEND (1 << 0) |
| #define SH_SERIAL_FLAG_TDE (1 << 1) |
| #define SH_SERIAL_FLAG_RDF (1 << 2) |
| #define SH_SERIAL_FLAG_BRK (1 << 3) |
| #define SH_SERIAL_FLAG_DR (1 << 4) |
| |
| #define SH_RX_FIFO_LENGTH (16) |
| |
| typedef struct { |
| MemoryRegion iomem; |
| MemoryRegion iomem_p4; |
| MemoryRegion iomem_a7; |
| uint8_t smr; |
| uint8_t brr; |
| uint8_t scr; |
| uint8_t dr; /* ftdr / tdr */ |
| uint8_t sr; /* fsr / ssr */ |
| uint16_t fcr; |
| uint8_t sptr; |
| |
| uint8_t rx_fifo[SH_RX_FIFO_LENGTH]; /* frdr / rdr */ |
| uint8_t rx_cnt; |
| uint8_t rx_tail; |
| uint8_t rx_head; |
| |
| int freq; |
| int feat; |
| int flags; |
| int rtrg; |
| |
| CharDriverState *chr; |
| |
| qemu_irq eri; |
| qemu_irq rxi; |
| qemu_irq txi; |
| qemu_irq tei; |
| qemu_irq bri; |
| } sh_serial_state; |
| |
| static void sh_serial_clear_fifo(sh_serial_state * s) |
| { |
| memset(s->rx_fifo, 0, SH_RX_FIFO_LENGTH); |
| s->rx_cnt = 0; |
| s->rx_head = 0; |
| s->rx_tail = 0; |
| } |
| |
| static void sh_serial_write(void *opaque, target_phys_addr_t offs, |
| uint64_t val, unsigned size) |
| { |
| sh_serial_state *s = opaque; |
| unsigned char ch; |
| |
| #ifdef DEBUG_SERIAL |
| printf("sh_serial: write offs=0x%02x val=0x%02x\n", |
| offs, val); |
| #endif |
| switch(offs) { |
| case 0x00: /* SMR */ |
| s->smr = val & ((s->feat & SH_SERIAL_FEAT_SCIF) ? 0x7b : 0xff); |
| return; |
| case 0x04: /* BRR */ |
| s->brr = val; |
| return; |
| case 0x08: /* SCR */ |
| /* TODO : For SH7751, SCIF mask should be 0xfb. */ |
| s->scr = val & ((s->feat & SH_SERIAL_FEAT_SCIF) ? 0xfa : 0xff); |
| if (!(val & (1 << 5))) |
| s->flags |= SH_SERIAL_FLAG_TEND; |
| if ((s->feat & SH_SERIAL_FEAT_SCIF) && s->txi) { |
| qemu_set_irq(s->txi, val & (1 << 7)); |
| } |
| if (!(val & (1 << 6))) { |
| qemu_set_irq(s->rxi, 0); |
| } |
| return; |
| case 0x0c: /* FTDR / TDR */ |
| if (s->chr) { |
| ch = val; |
| qemu_chr_fe_write(s->chr, &ch, 1); |
| } |
| s->dr = val; |
| s->flags &= ~SH_SERIAL_FLAG_TDE; |
| return; |
| #if 0 |
| case 0x14: /* FRDR / RDR */ |
| ret = 0; |
| break; |
| #endif |
| } |
| if (s->feat & SH_SERIAL_FEAT_SCIF) { |
| switch(offs) { |
| case 0x10: /* FSR */ |
| if (!(val & (1 << 6))) |
| s->flags &= ~SH_SERIAL_FLAG_TEND; |
| if (!(val & (1 << 5))) |
| s->flags &= ~SH_SERIAL_FLAG_TDE; |
| if (!(val & (1 << 4))) |
| s->flags &= ~SH_SERIAL_FLAG_BRK; |
| if (!(val & (1 << 1))) |
| s->flags &= ~SH_SERIAL_FLAG_RDF; |
| if (!(val & (1 << 0))) |
| s->flags &= ~SH_SERIAL_FLAG_DR; |
| |
| if (!(val & (1 << 1)) || !(val & (1 << 0))) { |
| if (s->rxi) { |
| qemu_set_irq(s->rxi, 0); |
| } |
| } |
| return; |
| case 0x18: /* FCR */ |
| s->fcr = val; |
| switch ((val >> 6) & 3) { |
| case 0: |
| s->rtrg = 1; |
| break; |
| case 1: |
| s->rtrg = 4; |
| break; |
| case 2: |
| s->rtrg = 8; |
| break; |
| case 3: |
| s->rtrg = 14; |
| break; |
| } |
| if (val & (1 << 1)) { |
| sh_serial_clear_fifo(s); |
| s->sr &= ~(1 << 1); |
| } |
| |
| return; |
| case 0x20: /* SPTR */ |
| s->sptr = val & 0xf3; |
| return; |
| case 0x24: /* LSR */ |
| return; |
| } |
| } |
| else { |
| switch(offs) { |
| #if 0 |
| case 0x0c: |
| ret = s->dr; |
| break; |
| case 0x10: |
| ret = 0; |
| break; |
| #endif |
| case 0x1c: |
| s->sptr = val & 0x8f; |
| return; |
| } |
| } |
| |
| fprintf(stderr, "sh_serial: unsupported write to 0x%02x\n", offs); |
| abort(); |
| } |
| |
| static uint64_t sh_serial_read(void *opaque, target_phys_addr_t offs, |
| unsigned size) |
| { |
| sh_serial_state *s = opaque; |
| uint32_t ret = ~0; |
| |
| #if 0 |
| switch(offs) { |
| case 0x00: |
| ret = s->smr; |
| break; |
| case 0x04: |
| ret = s->brr; |
| break; |
| case 0x08: |
| ret = s->scr; |
| break; |
| case 0x14: |
| ret = 0; |
| break; |
| } |
| #endif |
| if (s->feat & SH_SERIAL_FEAT_SCIF) { |
| switch(offs) { |
| case 0x00: /* SMR */ |
| ret = s->smr; |
| break; |
| case 0x08: /* SCR */ |
| ret = s->scr; |
| break; |
| case 0x10: /* FSR */ |
| ret = 0; |
| if (s->flags & SH_SERIAL_FLAG_TEND) |
| ret |= (1 << 6); |
| if (s->flags & SH_SERIAL_FLAG_TDE) |
| ret |= (1 << 5); |
| if (s->flags & SH_SERIAL_FLAG_BRK) |
| ret |= (1 << 4); |
| if (s->flags & SH_SERIAL_FLAG_RDF) |
| ret |= (1 << 1); |
| if (s->flags & SH_SERIAL_FLAG_DR) |
| ret |= (1 << 0); |
| |
| if (s->scr & (1 << 5)) |
| s->flags |= SH_SERIAL_FLAG_TDE | SH_SERIAL_FLAG_TEND; |
| |
| break; |
| case 0x14: |
| if (s->rx_cnt > 0) { |
| ret = s->rx_fifo[s->rx_tail++]; |
| s->rx_cnt--; |
| if (s->rx_tail == SH_RX_FIFO_LENGTH) |
| s->rx_tail = 0; |
| if (s->rx_cnt < s->rtrg) |
| s->flags &= ~SH_SERIAL_FLAG_RDF; |
| } |
| break; |
| #if 0 |
| case 0x18: |
| ret = s->fcr; |
| break; |
| #endif |
| case 0x1c: |
| ret = s->rx_cnt; |
| break; |
| case 0x20: |
| ret = s->sptr; |
| break; |
| case 0x24: |
| ret = 0; |
| break; |
| } |
| } |
| else { |
| switch(offs) { |
| #if 0 |
| case 0x0c: |
| ret = s->dr; |
| break; |
| case 0x10: |
| ret = 0; |
| break; |
| case 0x14: |
| ret = s->rx_fifo[0]; |
| break; |
| #endif |
| case 0x1c: |
| ret = s->sptr; |
| break; |
| } |
| } |
| #ifdef DEBUG_SERIAL |
| printf("sh_serial: read offs=0x%02x val=0x%x\n", |
| offs, ret); |
| #endif |
| |
| if (ret & ~((1 << 16) - 1)) { |
| fprintf(stderr, "sh_serial: unsupported read from 0x%02x\n", offs); |
| abort(); |
| } |
| |
| return ret; |
| } |
| |
| static int sh_serial_can_receive(sh_serial_state *s) |
| { |
| return s->scr & (1 << 4); |
| } |
| |
| static void sh_serial_receive_break(sh_serial_state *s) |
| { |
| if (s->feat & SH_SERIAL_FEAT_SCIF) |
| s->sr |= (1 << 4); |
| } |
| |
| static int sh_serial_can_receive1(void *opaque) |
| { |
| sh_serial_state *s = opaque; |
| return sh_serial_can_receive(s); |
| } |
| |
| static void sh_serial_receive1(void *opaque, const uint8_t *buf, int size) |
| { |
| sh_serial_state *s = opaque; |
| |
| if (s->feat & SH_SERIAL_FEAT_SCIF) { |
| int i; |
| for (i = 0; i < size; i++) { |
| if (s->rx_cnt < SH_RX_FIFO_LENGTH) { |
| s->rx_fifo[s->rx_head++] = buf[i]; |
| if (s->rx_head == SH_RX_FIFO_LENGTH) { |
| s->rx_head = 0; |
| } |
| s->rx_cnt++; |
| if (s->rx_cnt >= s->rtrg) { |
| s->flags |= SH_SERIAL_FLAG_RDF; |
| if (s->scr & (1 << 6) && s->rxi) { |
| qemu_set_irq(s->rxi, 1); |
| } |
| } |
| } |
| } |
| } else { |
| s->rx_fifo[0] = buf[0]; |
| } |
| } |
| |
| static void sh_serial_event(void *opaque, int event) |
| { |
| sh_serial_state *s = opaque; |
| if (event == CHR_EVENT_BREAK) |
| sh_serial_receive_break(s); |
| } |
| |
| static const MemoryRegionOps sh_serial_ops = { |
| .read = sh_serial_read, |
| .write = sh_serial_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| void sh_serial_init(MemoryRegion *sysmem, |
| target_phys_addr_t base, int feat, |
| uint32_t freq, CharDriverState *chr, |
| qemu_irq eri_source, |
| qemu_irq rxi_source, |
| qemu_irq txi_source, |
| qemu_irq tei_source, |
| qemu_irq bri_source) |
| { |
| sh_serial_state *s; |
| |
| s = g_malloc0(sizeof(sh_serial_state)); |
| |
| s->feat = feat; |
| s->flags = SH_SERIAL_FLAG_TEND | SH_SERIAL_FLAG_TDE; |
| s->rtrg = 1; |
| |
| s->smr = 0; |
| s->brr = 0xff; |
| s->scr = 1 << 5; /* pretend that TX is enabled so early printk works */ |
| s->sptr = 0; |
| |
| if (feat & SH_SERIAL_FEAT_SCIF) { |
| s->fcr = 0; |
| } |
| else { |
| s->dr = 0xff; |
| } |
| |
| sh_serial_clear_fifo(s); |
| |
| memory_region_init_io(&s->iomem, &sh_serial_ops, s, |
| "serial", 0x100000000ULL); |
| |
| memory_region_init_alias(&s->iomem_p4, "serial-p4", &s->iomem, |
| 0, 0x28); |
| memory_region_add_subregion(sysmem, P4ADDR(base), &s->iomem_p4); |
| |
| memory_region_init_alias(&s->iomem_a7, "serial-a7", &s->iomem, |
| 0, 0x28); |
| memory_region_add_subregion(sysmem, A7ADDR(base), &s->iomem_a7); |
| |
| s->chr = chr; |
| |
| if (chr) |
| qemu_chr_add_handlers(chr, sh_serial_can_receive1, sh_serial_receive1, |
| sh_serial_event, s); |
| |
| s->eri = eri_source; |
| s->rxi = rxi_source; |
| s->txi = txi_source; |
| s->tei = tei_source; |
| s->bri = bri_source; |
| } |