| COLO-proxy |
| ---------- |
| Copyright (c) 2016 Intel Corporation |
| Copyright (c) 2016 HUAWEI TECHNOLOGIES CO., LTD. |
| Copyright (c) 2016 Fujitsu, Corp. |
| |
| This work is licensed under the terms of the GNU GPL, version 2 or later. |
| See the COPYING file in the top-level directory. |
| |
| This document gives an overview of COLO proxy's design. |
| |
| == Background == |
| COLO-proxy is a part of COLO project. It is used |
| to compare the network package to help COLO decide |
| whether to do checkpoint. With COLO-proxy's help, |
| COLO greatly improves the performance. |
| |
| The filter-redirector, filter-mirror, colo-compare |
| and filter-rewriter compose the COLO-proxy. |
| |
| == Architecture == |
| |
| COLO-Proxy is based on qemu netfilter and it's a plugin for qemu netfilter |
| (except colo-compare). It keep Secondary VM connect normally to |
| client and compare packets sent by PVM with sent by SVM. |
| If the packet difference, notify COLO-frame to do checkpoint and send |
| all primary packet has queued. Otherwise just send the queued primary |
| packet and drop the queued secondary packet. |
| |
| Below is a COLO proxy ascii figure: |
| |
| Primary qemu Secondary qemu |
| +--------------------------------------------------------------+ +----------------------------------------------------------------+ |
| | +----------------------------------------------------------+ | | +-----------------------------------------------------------+ | |
| | | | | | | | | |
| | | guest | | | | guest | | |
| | | | | | | | | |
| | +-------^--------------------------+-----------------------+ | | +---------------------+--------+----------------------------+ | |
| | | | | | ^ | | |
| | | | | | | | | |
| | | +------------------------------------------------------+ | | | | |
| |netfilter| | | | | | netfilter | | | |
| | +----------+ +----------------------------+ | | | +-----------------------------------------------------------+ | |
| | | | | | | out | | | | | | filter excute order | | |
| | | | | +-----------------------------+ | | | | | | +-------------------> | | |
| | | | | | | | | | | | | | | TCP | | |
| | | +-----+--+-+ +-----v----+ +-----v----+ |pri +----+----+sec| | | | +------------+ +---+----+---v+rewriter++ +------------+ | | |
| | | | | | | | | |in | |in | | | | | | | | | | | | | |
| | | | filter | | filter | | filter +------> colo <------+ +--------> filter +--> adjust | adjust +--> filter | | | |
| | | | mirror | |redirector| |redirector| | | compare | | | | | | redirector | | ack | seq | | redirector | | | |
| | | | | | | | | | | | | | | | | | | | | | | | | |
| | | +----^-----+ +----+-----+ +----------+ | +---------+ | | | | +------------+ +--------+--------------+ +---+--------+ | | |
| | | | tx | rx rx | | | | | tx all | rx | | |
| | | | | | | | | +-----------------------------------------------------------+ | |
| | | | +--------------+ | | | | | | |
| | | | filter excute order | | | | | | | |
| | | | +----------------> | | | +--------------------------------------------------------+ | |
| | +-----------------------------------------+ | | | |
| | | | | | | |
| +--------------------------------------------------------------+ +----------------------------------------------------------------+ |
| |guest receive | guest send |
| | | |
| +--------+----------------------------v------------------------+ |
| | | NOTE: filter direction is rx/tx/all |
| | tap | rx:receive packets sent to the netdev |
| | | tx:receive packets sent by the netdev |
| +--------------------------------------------------------------+ |
| |
| 1.Guest receive packet route: |
| |
| Primary: |
| |
| Tap --> Mirror Client Filter |
| Mirror client will send packet to guest,at the |
| same time, copy and forward packet to secondary |
| mirror server. |
| |
| Secondary: |
| |
| Mirror Server Filter --> TCP Rewriter |
| If receive packet is TCP packet,we will adjust ack |
| and update TCP checksum, then send to secondary |
| guest. Otherwise directly send to guest. |
| |
| 2.Guest send packet route: |
| |
| Primary: |
| |
| Guest --> Redirect Server Filter |
| Redirect server filter receive primary guest packet |
| but do nothing, just pass to next filter. |
| |
| Redirect Server Filter --> COLO-Compare |
| COLO-compare receive primary guest packet then |
| waiting scondary redirect packet to compare it. |
| If packet same,send queued primary packet and clear |
| queued secondary packet, Otherwise send primary packet |
| and do checkpoint. |
| |
| COLO-Compare --> Another Redirector Filter |
| The redirector get packet from colo-compare by use |
| chardev socket. |
| |
| Redirector Filter --> Tap |
| Send the packet. |
| |
| Secondary: |
| |
| Guest --> TCP Rewriter Filter |
| If the packet is TCP packet,we will adjust seq |
| and update TCP checksum. Then send it to |
| redirect client filter. Otherwise directly send to |
| redirect client filter. |
| |
| Redirect Client Filter --> Redirect Server Filter |
| Forward packet to primary. |
| |
| == Components introduction == |
| |
| Filter-mirror is a netfilter plugin. |
| It gives qemu the ability to mirror |
| packets to a chardev. |
| |
| Filter-redirector is a netfilter plugin. |
| It gives qemu the ability to redirect net packet. |
| Redirector can redirect filter's net packet to outdev, |
| and redirect indev's packet to filter. |
| |
| filter |
| + |
| redirector | |
| +--------------+ |
| | | | |
| | | | |
| | | | |
| indev +---------+ +----------> outdev |
| | | | |
| | | | |
| | | | |
| +--------------+ |
| | |
| v |
| filter |
| |
| COLO-compare, we do packet comparing job. |
| Packets coming from the primary char indev will be sent to outdev. |
| Packets coming from the secondary char dev will be dropped after comparing. |
| COLO-compare needs two input chardevs and one output chardev: |
| primary_in=chardev1-id (source: primary send packet) |
| secondary_in=chardev2-id (source: secondary send packet) |
| outdev=chardev3-id |
| |
| Filter-rewriter will rewrite some of secondary packet to make |
| secondary guest's tcp connection established successfully. |
| In this module we will rewrite tcp packet's ack to the secondary |
| from primary,and rewrite tcp packet's seq to the primary from |
| secondary. |
| |
| == Usage == |
| |
| Here is an example using demonstration IP and port addresses to more |
| clearly describe the usage. |
| |
| Primary(ip:3.3.3.3): |
| -netdev tap,id=hn0,vhost=off,script=/etc/qemu-ifup,downscript=/etc/qemu-ifdown |
| -device e1000,id=e0,netdev=hn0,mac=52:a4:00:12:78:66 |
| -chardev socket,id=mirror0,host=3.3.3.3,port=9003,server,nowait |
| -chardev socket,id=compare1,host=3.3.3.3,port=9004,server,nowait |
| -chardev socket,id=compare0,host=3.3.3.3,port=9001,server,nowait |
| -chardev socket,id=compare0-0,host=3.3.3.3,port=9001 |
| -chardev socket,id=compare_out,host=3.3.3.3,port=9005,server,nowait |
| -chardev socket,id=compare_out0,host=3.3.3.3,port=9005 |
| -object iothread,id=iothread1 |
| -object filter-mirror,id=m0,netdev=hn0,queue=tx,outdev=mirror0 |
| -object filter-redirector,netdev=hn0,id=redire0,queue=rx,indev=compare_out |
| -object filter-redirector,netdev=hn0,id=redire1,queue=rx,outdev=compare0 |
| -object colo-compare,id=comp0,primary_in=compare0-0,secondary_in=compare1,outdev=compare_out0,iothread=iothread1 |
| |
| Secondary(ip:3.3.3.8): |
| -netdev tap,id=hn0,vhost=off,script=/etc/qemu-ifup,down script=/etc/qemu-ifdown |
| -device e1000,netdev=hn0,mac=52:a4:00:12:78:66 |
| -chardev socket,id=red0,host=3.3.3.3,port=9003 |
| -chardev socket,id=red1,host=3.3.3.3,port=9004 |
| -object filter-redirector,id=f1,netdev=hn0,queue=tx,indev=red0 |
| -object filter-redirector,id=f2,netdev=hn0,queue=rx,outdev=red1 |
| -object filter-rewriter,id=f3,netdev=hn0,queue=all |
| |
| If you want to use virtio-net-pci or other driver with vnet_header: |
| |
| Primary(ip:3.3.3.3): |
| -netdev tap,id=hn0,vhost=off,script=/etc/qemu-ifup,downscript=/etc/qemu-ifdown |
| -device e1000,id=e0,netdev=hn0,mac=52:a4:00:12:78:66 |
| -chardev socket,id=mirror0,host=3.3.3.3,port=9003,server,nowait |
| -chardev socket,id=compare1,host=3.3.3.3,port=9004,server,nowait |
| -chardev socket,id=compare0,host=3.3.3.3,port=9001,server,nowait |
| -chardev socket,id=compare0-0,host=3.3.3.3,port=9001 |
| -chardev socket,id=compare_out,host=3.3.3.3,port=9005,server,nowait |
| -chardev socket,id=compare_out0,host=3.3.3.3,port=9005 |
| -object filter-mirror,id=m0,netdev=hn0,queue=tx,outdev=mirror0,vnet_hdr_support |
| -object filter-redirector,netdev=hn0,id=redire0,queue=rx,indev=compare_out,vnet_hdr_support |
| -object filter-redirector,netdev=hn0,id=redire1,queue=rx,outdev=compare0,vnet_hdr_support |
| -object colo-compare,id=comp0,primary_in=compare0-0,secondary_in=compare1,outdev=compare_out0,vnet_hdr_support |
| |
| Secondary(ip:3.3.3.8): |
| -netdev tap,id=hn0,vhost=off,script=/etc/qemu-ifup,down script=/etc/qemu-ifdown |
| -device e1000,netdev=hn0,mac=52:a4:00:12:78:66 |
| -chardev socket,id=red0,host=3.3.3.3,port=9003 |
| -chardev socket,id=red1,host=3.3.3.3,port=9004 |
| -object filter-redirector,id=f1,netdev=hn0,queue=tx,indev=red0,vnet_hdr_support |
| -object filter-redirector,id=f2,netdev=hn0,queue=rx,outdev=red1,vnet_hdr_support |
| -object filter-rewriter,id=f3,netdev=hn0,queue=all,vnet_hdr_support |
| |
| Note: |
| a.COLO-proxy must work with COLO-frame and Block-replication. |
| b.Primary COLO must be started firstly, because COLO-proxy needs |
| chardev socket server running before secondary started. |
| c.Filter-rewriter only rewrite tcp packet. |
