| /* |
| * QEMU PCI bridge |
| * |
| * Copyright (c) 2004 Fabrice Bellard |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. |
| * |
| * split out pci bus specific stuff from pci.[hc] to pci_bridge.[hc] |
| * Copyright (c) 2009 Isaku Yamahata <yamahata at valinux co jp> |
| * VA Linux Systems Japan K.K. |
| * |
| */ |
| |
| #ifndef QEMU_PCI_BRIDGE_H |
| #define QEMU_PCI_BRIDGE_H |
| |
| #include "hw/pci/pci_device.h" |
| #include "hw/pci/pci_bus.h" |
| #include "hw/cxl/cxl.h" |
| #include "qom/object.h" |
| |
| typedef struct PCIBridgeWindows PCIBridgeWindows; |
| |
| /* |
| * Aliases for each of the address space windows that the bridge |
| * can forward. Mapped into the bridge's parent's address space, |
| * as subregions. |
| */ |
| struct PCIBridgeWindows { |
| MemoryRegion alias_pref_mem; |
| MemoryRegion alias_mem; |
| MemoryRegion alias_io; |
| /* |
| * When bridge control VGA forwarding is enabled, bridges will |
| * provide positive decode on the PCI VGA defined I/O port and |
| * MMIO ranges. When enabled forwarding is only qualified on the |
| * I/O and memory enable bits in the bridge command register. |
| */ |
| MemoryRegion alias_vga[QEMU_PCI_VGA_NUM_REGIONS]; |
| }; |
| |
| #define TYPE_PCI_BRIDGE "base-pci-bridge" |
| OBJECT_DECLARE_SIMPLE_TYPE(PCIBridge, PCI_BRIDGE) |
| #define IS_PCI_BRIDGE(dev) object_dynamic_cast(OBJECT(dev), TYPE_PCI_BRIDGE) |
| |
| struct PCIBridge { |
| /*< private >*/ |
| PCIDevice parent_obj; |
| /*< public >*/ |
| |
| /* private member */ |
| PCIBus sec_bus; |
| /* |
| * Memory regions for the bridge's address spaces. These regions are not |
| * directly added to system_memory/system_io or its descendants. |
| * Bridge's secondary bus points to these, so that devices |
| * under the bridge see these regions as its address spaces. |
| * The regions are as large as the entire address space - |
| * they don't take into account any windows. |
| */ |
| MemoryRegion address_space_mem; |
| MemoryRegion address_space_io; |
| |
| PCIBridgeWindows windows; |
| |
| pci_map_irq_fn map_irq; |
| const char *bus_name; |
| |
| /* SLT is RO for PCIE to PCIE bridges, but old QEMU versions had it RW */ |
| bool pcie_writeable_slt_bug; |
| }; |
| |
| #define PCI_BRIDGE_DEV_PROP_CHASSIS_NR "chassis_nr" |
| #define PCI_BRIDGE_DEV_PROP_MSI "msi" |
| #define PCI_BRIDGE_DEV_PROP_SHPC "shpc" |
| typedef struct CXLHost CXLHost; |
| |
| typedef struct PXBDev { |
| /*< private >*/ |
| PCIDevice parent_obj; |
| /*< public >*/ |
| |
| uint8_t bus_nr; |
| uint16_t numa_node; |
| bool bypass_iommu; |
| } PXBDev; |
| |
| typedef struct PXBPCIEDev { |
| /*< private >*/ |
| PXBDev parent_obj; |
| } PXBPCIEDev; |
| |
| #define TYPE_PXB_DEV "pxb" |
| OBJECT_DECLARE_SIMPLE_TYPE(PXBDev, PXB_DEV) |
| |
| typedef struct PXBCXLDev { |
| /*< private >*/ |
| PXBPCIEDev parent_obj; |
| /*< public >*/ |
| |
| bool hdm_for_passthrough; |
| CXLHost *cxl_host_bridge; /* Pointer to a CXLHost */ |
| } PXBCXLDev; |
| |
| #define TYPE_PXB_CXL_DEV "pxb-cxl" |
| OBJECT_DECLARE_SIMPLE_TYPE(PXBCXLDev, PXB_CXL_DEV) |
| |
| int pci_bridge_ssvid_init(PCIDevice *dev, uint8_t offset, |
| uint16_t svid, uint16_t ssid, |
| Error **errp); |
| |
| PCIDevice *pci_bridge_get_device(PCIBus *bus); |
| PCIBus *pci_bridge_get_sec_bus(PCIBridge *br); |
| |
| pcibus_t pci_bridge_get_base(const PCIDevice *bridge, uint8_t type); |
| pcibus_t pci_bridge_get_limit(const PCIDevice *bridge, uint8_t type); |
| |
| void pci_bridge_update_mappings(PCIBridge *br); |
| void pci_bridge_write_config(PCIDevice *d, |
| uint32_t address, uint32_t val, int len); |
| void pci_bridge_disable_base_limit(PCIDevice *dev); |
| void pci_bridge_reset(DeviceState *qdev); |
| |
| void pci_bridge_initfn(PCIDevice *pci_dev, const char *typename); |
| void pci_bridge_exitfn(PCIDevice *pci_dev); |
| |
| void pci_bridge_dev_plug_cb(HotplugHandler *hotplug_dev, DeviceState *dev, |
| Error **errp); |
| void pci_bridge_dev_unplug_cb(HotplugHandler *hotplug_dev, DeviceState *dev, |
| Error **errp); |
| void pci_bridge_dev_unplug_request_cb(HotplugHandler *hotplug_dev, |
| DeviceState *dev, Error **errp); |
| |
| /* |
| * before qdev initialization(qdev_init()), this function sets bus_name and |
| * map_irq callback which are necessary for pci_bridge_initfn() to |
| * initialize bus. |
| */ |
| void pci_bridge_map_irq(PCIBridge *br, const char* bus_name, |
| pci_map_irq_fn map_irq); |
| |
| /* TODO: add this define to pci_regs.h in linux and then in qemu. */ |
| #define PCI_BRIDGE_CTL_VGA_16BIT 0x10 /* VGA 16-bit decode */ |
| #define PCI_BRIDGE_CTL_DISCARD 0x100 /* Primary discard timer */ |
| #define PCI_BRIDGE_CTL_SEC_DISCARD 0x200 /* Secondary discard timer */ |
| #define PCI_BRIDGE_CTL_DISCARD_STATUS 0x400 /* Discard timer status */ |
| #define PCI_BRIDGE_CTL_DISCARD_SERR 0x800 /* Discard timer SERR# enable */ |
| |
| typedef struct PCIBridgeQemuCap { |
| uint8_t id; /* Standard PCI capability header field */ |
| uint8_t next; /* Standard PCI capability header field */ |
| uint8_t len; /* Standard PCI vendor-specific capability header field */ |
| uint8_t type; /* Red Hat vendor-specific capability type. |
| Types are defined with REDHAT_PCI_CAP_ prefix */ |
| |
| uint32_t bus_res; /* Minimum number of buses to reserve */ |
| uint64_t io; /* IO space to reserve */ |
| uint32_t mem; /* Non-prefetchable memory to reserve */ |
| /* At most one of the following two fields may be set to a value |
| * different from -1 */ |
| uint32_t mem_pref_32; /* Prefetchable memory to reserve (32-bit MMIO) */ |
| uint64_t mem_pref_64; /* Prefetchable memory to reserve (64-bit MMIO) */ |
| } PCIBridgeQemuCap; |
| |
| #define REDHAT_PCI_CAP_TYPE_OFFSET 3 |
| #define REDHAT_PCI_CAP_RESOURCE_RESERVE 1 |
| |
| /* |
| * PCI BUS/IO/MEM/PREFMEM additional resources recorded as a |
| * capability in PCI configuration space to reserve on firmware init. |
| */ |
| typedef struct PCIResReserve { |
| uint32_t bus; |
| uint64_t io; |
| uint64_t mem_non_pref; |
| uint64_t mem_pref_32; |
| uint64_t mem_pref_64; |
| } PCIResReserve; |
| |
| #define REDHAT_PCI_CAP_RES_RESERVE_BUS_RES 4 |
| #define REDHAT_PCI_CAP_RES_RESERVE_IO 8 |
| #define REDHAT_PCI_CAP_RES_RESERVE_MEM 16 |
| #define REDHAT_PCI_CAP_RES_RESERVE_PREF_MEM_32 20 |
| #define REDHAT_PCI_CAP_RES_RESERVE_PREF_MEM_64 24 |
| #define REDHAT_PCI_CAP_RES_RESERVE_CAP_SIZE 32 |
| |
| int pci_bridge_qemu_reserve_cap_init(PCIDevice *dev, int cap_offset, |
| PCIResReserve res_reserve, Error **errp); |
| |
| #endif /* QEMU_PCI_BRIDGE_H */ |